aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-10-07Merge tag 'omap-for-v5.15/fixes-rc4' of ↵Arnd Bergmann2-12/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.15 Few regression fixes for omaps for the v5.15-rc cycle. There is a fix for boot time hangs that can happen on some am335x devices that started when the pruss devicetree nodes were added. The other fixes are less critical: - Fix compiler warning for sysc_init_soc() that got recently introduced - Fix external abort for am335x pruss as otherwise some am335x will hang - Use CLKDM_NOAUTO quirk also for dra7 dcan1 - Fix older NAND device node regression for omap3-sdp * tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3430-sdp: Fix NAND device node bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893 soc: ti: omap-prm: Fix external abort for am335x pruss bus: ti-sysc: Add break in switch statement in sysc_init_soc() Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-07Merge tag 'net-5.15-rc5' of ↵Linus Torvalds37-170/+333
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from xfrm, bpf, netfilter, and wireless. Current release - regressions: - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new value in the middle of an enum - unix: fix an issue in unix_shutdown causing the other end read/write failures - phy: mdio: fix memory leak Current release - new code bugs: - mlx5e: improve MQPRIO resiliency against bad configs Previous releases - regressions: - bpf: fix integer overflow leading to OOB access in map element pre-allocation - stmmac: dwmac-rk: fix ethernet on rk3399 based devices - netfilter: conntrack: fix boot failure with nf_conntrack.enable_hooks=1 - brcmfmac: revert using ISO3166 country code and 0 rev as fallback - i40e: fix freeing of uninitialized misc IRQ vector - iavf: fix double unlock of crit_lock Previous releases - always broken: - bpf, arm: fix register clobbering in div/mod implementation - netfilter: nf_tables: correct issues in netlink rule change event notifications - dsa: tag_dsa: fix mask for trunked packets - usb: r8152: don't resubmit rx immediately to avoid soft lockup on device unplug - i40e: fix endless loop under rtnl if FW fails to correctly respond to capability query - mlx5e: fix rx checksum offload coexistence with ipsec offload - mlx5: force round second at 1PPS out start time and allow it only in supported clock modes - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable sequence Misc: - xfrm: slightly rejig the new policy uAPI to make it less cryptic" * tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits) net: prefer socket bound to interface when not in VRF iavf: fix double unlock of crit_lock i40e: Fix freeing of uninitialized misc IRQ vector i40e: fix endless loop under rtnl dt-bindings: net: dsa: marvell: fix compatible in example ionic: move filter sync_needed bit set gve: report 64bit tx_bytes counter from gve_handle_report_stats() gve: fix gve_get_stats() rtnetlink: fix if_nlmsg_stats_size() under estimation gve: Properly handle errors in gve_assign_qpl gve: Avoid freeing NULL pointer gve: Correct available tx qpl check unix: Fix an issue in unix_shutdown causing the other end read/write failures net: stmmac: trigger PCS EEE to turn off on link down net: pcs: xpcs: fix incorrect steps on disable EEE netlink: annotate data races around nlk->bound net: pcs: xpcs: fix incorrect CL37 AN sequence net: sfp: Fix typo in state machine debug string net/sched: sch_taprio: properly cancel timer from taprio_destroy() net: bridge: fix under estimation in br_get_linkxstats_size() ...
2021-10-07Merge tag 'hyperv-fixes-signed-20211007' of ↵Linus Torvalds1-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Replace uuid.h with types.h in a header (Andy Shevchenko) - Avoid sleeping in atomic context in PCI driver (Long Li) - Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov) * tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Avoid erroneously sending IPI to 'self' hyper-v: Replace uuid.h with types.h PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
2021-10-07PCI: ACPI: Check parent pointer in acpi_pci_find_companion()Rafael J. Wysocki1-0/+3
If acpi_pci_find_companion() is called for a device whose parent pointer is NULL, it will crash when attempting to get the ACPI companion of the parent due to a NULL pointer dereference in the ACPI_COMPANION() macro. This was not a problem before commit 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") that made pci_setup_device() call pci_set_acpi_fwnode() and so it allowed devices with NULL parent pointers to be passed to acpi_pci_find_companion() which is the case in pci_iov_add_virtfn(), for instance. Fix this issue by making acpi_pci_find_companion() check the device's parent pointer upfront and bail out if it is NULL. While pci_iov_add_virtfn() can be changed to set the device's parent pointer before calling pci_setup_device() for it, checking pointers against NULL before dereferencing them is prudent anyway and looking for ACPI companions of virtual functions isn't really useful. Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF") Link: https://lore.kernel.org/linux-acpi/[email protected]/ Reported-by: Niklas Schnelle <[email protected]> Tested-by: Niklas Schnelle <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Bjorn Helgaas <[email protected]>
2021-10-07qcom_scm: hide Kconfig symbolArnd Bergmann10-14/+14
Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <[email protected]> Acked-by: Alex Elder <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-07firmware: include drivers/firmware/Kconfig unconditionallyArnd Bergmann1-0/+2
Compile-testing drivers that require access to a firmware layer fails when that firmware symbol is unavailable. This happened twice this week: - My proposed to change to rework the QCOM_SCM firmware symbol broke on ppc64 and others. - The cs_dsp firmware patch added device specific firmware loader into drivers/firmware, which broke on the same set of architectures. We should probably do the same thing for other subsystems as well, but fix this one first as this is a dependency for other patches getting merged. Reviewed-by: Bjorn Andersson <[email protected]> Reviewed-by: Charles Keepax <[email protected]> Acked-by: Will Deacon <[email protected]> Acked-by: Bjorn Andersson <[email protected]> Cc: Mark Brown <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Charles Keepax <[email protected]> Cc: Simon Trimmer <[email protected]> Cc: Michael Ellerman <[email protected]> Reviewed-by: Mark Brown <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2021-10-06thunderbolt: build kunit tests without structleak pluginBrendan Higgins1-0/+1
The structleak plugin causes the stack frame size to grow immensely when used with KUnit: drivers/thunderbolt/test.c:1529:1: error: the frame size of 1176 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Turn it off in this file. Linus already split up tests in this file, so this change *should* be redundant now. Signed-off-by: Brendan Higgins <[email protected]> Suggested-by: Arnd Bergmann <[email protected]> Acked-by: Mika Westerberg <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-10-06device property: build kunit tests without structleak pluginBrendan Higgins1-1/+1
The structleak plugin causes the stack frame size to grow immensely when used with KUnit: ../drivers/base/test/property-entry-test.c:492:1: warning: the frame size of 2832 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:322:1: warning: the frame size of 2080 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:250:1: warning: the frame size of 4976 bytes is larger than 2048 bytes [-Wframe-larger-than=] ../drivers/base/test/property-entry-test.c:115:1: warning: the frame size of 3280 bytes is larger than 2048 bytes [-Wframe-larger-than=] Turn it off in this file. Signed-off-by: Brendan Higgins <[email protected]> Suggested-by: Arnd Bergmann <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-10-06iio/test-format: build kunit tests without structleak pluginBrendan Higgins1-0/+1
The structleak plugin causes the stack frame size to grow immensely when used with KUnit: ../drivers/iio/test/iio-test-format.c: In function ‘iio_test_iio_format_value_fixedpoint’: ../drivers/iio/test/iio-test-format.c:98:1: warning: the frame size of 2336 bytes is larger than 2048 bytes [-Wframe-larger-than=] Turn it off in this file. Signed-off-by: Brendan Higgins <[email protected]> Suggested-by: Arnd Bergmann <[email protected]> Reviewed-by: Kees Cook <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2021-10-06drm/amd/display: Fix detection of 4 lane for DPALTHansen2-1/+35
[Why] DPALT detection for B0 PHY has its own set of RDPCSPIPE registers [How] Use RDPCSPIPE registers to detect if DPALT lane is 4 lane Reviewed-by: Charlene Liu <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Hansen <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-10-06drm/amd/display: Limit display scaling to up to 4k for DCN 3.1Nikola Cornij1-1/+1
[why] The existing limit was mistakenly bigger than 4k for DCN 3.1 Reviewed-by: Zhan Liu <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: Nikola Cornij <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-10-06drm/amd/display: Skip override for preferred link settings during link trainingGeorge Shen1-6/+0
[Why] Overriding link setting inside override_training_settings result in fallback link settings being ignored. This can potentially cause link training to always fail and consequently result in an infinite loop of link training to occur in dp_verify_link_cap during detection. [How] Since preferred link settings are already considered inside decide_link_settings, skip the check in override_training_settings to avoid infinite link training loops. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Solomon Chiu <[email protected]> Signed-off-by: George Shen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-06iavf: fix double unlock of crit_lockStefan Assmann1-1/+0
The crit_lock mutex could be unlocked twice as reported here https://lists.osuosl.org/pipermail/intel-wired-lan/Week-of-Mon-20210823/025525.html Remove the superfluous unlock. Technically the problem was already present before 5ac49f3c2702 as that commit only replaced the locking primitive, but no functional change. Reported-by: Dan Carpenter <[email protected]> Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Fixes: bac8486116b0 ("iavf: Refactor the watchdog state machine") Signed-off-by: Stefan Assmann <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-06i40e: Fix freeing of uninitialized misc IRQ vectorSylwester Dziedziuch1-1/+2
When VSI set up failed in i40e_probe() as part of PF switch set up driver was trying to free misc IRQ vectors in i40e_clear_interrupt_scheme and produced a kernel Oops: Trying to free already-free IRQ 266 WARNING: CPU: 0 PID: 5 at kernel/irq/manage.c:1731 __free_irq+0x9a/0x300 Workqueue: events work_for_cpu_fn RIP: 0010:__free_irq+0x9a/0x300 Call Trace: ? synchronize_irq+0x3a/0xa0 free_irq+0x2e/0x60 i40e_clear_interrupt_scheme+0x53/0x190 [i40e] i40e_probe.part.108+0x134b/0x1a40 [i40e] ? kmem_cache_alloc+0x158/0x1c0 ? acpi_ut_update_ref_count.part.1+0x8e/0x345 ? acpi_ut_update_object_reference+0x15e/0x1e2 ? strstr+0x21/0x70 ? irq_get_irq_data+0xa/0x20 ? mp_check_pin_attr+0x13/0xc0 ? irq_get_irq_data+0xa/0x20 ? mp_map_pin_to_irq+0xd3/0x2f0 ? acpi_register_gsi_ioapic+0x93/0x170 ? pci_conf1_read+0xa4/0x100 ? pci_bus_read_config_word+0x49/0x70 ? do_pci_enable_device+0xcc/0x100 local_pci_probe+0x41/0x90 work_for_cpu_fn+0x16/0x20 process_one_work+0x1a7/0x360 worker_thread+0x1cf/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x112/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x1f/0x40 The problem is that at that point misc IRQ vectors were not allocated yet and we get a call trace that driver is trying to free already free IRQ vectors. Add a check in i40e_clear_interrupt_scheme for __I40E_MISC_IRQ_REQUESTED PF state before calling i40e_free_misc_vector. This state is set only if misc IRQ vectors were properly initialized. Fixes: c17401a1dd21 ("i40e: use separate state bit for miscellaneous IRQ setup") Reported-by: PJ Waskiewicz <[email protected]> Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Dave Switzer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-06i40e: fix endless loop under rtnlJiri Benc1-1/+1
The loop in i40e_get_capabilities can never end. The problem is that although i40e_aq_discover_capabilities returns with an error if there's a firmware problem, the returned error is not checked. There is a check for pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most firmware problems. When i40e_aq_discover_capabilities encounters a firmware problem, it will encounter the same problem on its next invocation. As the result, the loop becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking at the code, it can happen with a range of other firmware errors. I don't know what the correct behavior should be: whether the firmware should be retried a few times, or whether pf->hw.aq.asq_last_status should be always set to the encountered firmware error (but then it would be pointless and can be just replaced by the i40e_aq_discover_capabilities return value). However, the current behavior with an endless loop under the rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we explained the bug to them 7 months ago. This may not be the best possible fix but it's better than hanging the whole system on a firmware bug. Fixes: 56a62fc86895 ("i40e: init code and hardware support") Tested-by: Stefan Assmann <[email protected]> Signed-off-by: Jiri Benc <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Dave Switzer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-10-06mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirkNeil Armstrong1-14/+59
The memory at the end of the controller only accepts 32bit read/write accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit (which will be split into two 32bit access) and 8bit leading to incomplete copies to/from this memory when the buffer is not multiple of 8bytes. Add a local copy using writel/readl accesses to make sure we use the right memory access width. The switch to memcpy_to/fromio was done because of 285133040e6c ("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy worked before since it mainly used 32bit memory acceses. Fixes: 103a5348c22c ("mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk") Reported-by: Christian Hewitt <[email protected]> Suggested-by: Martin Blumenstingl <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Tested-by: Martin Blumenstingl <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2021-10-06mmc: sdhci-of-at91: replace while loop with read_poll_timeoutClaudiu Beznea1-11/+5
Replace while loop with read_poll_timeout(). Signed-off-by: Claudiu Beznea <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2021-10-06mmc: sdhci-of-at91: wait for calibration done before proceedClaudiu Beznea1-0/+6
Datasheet specifies that at the end of calibration the SDMMC_CALCR_EN bit will be cleared. No commands should be send before calibration is done. Fixes: dbdea70f71d67 ("mmc: sdhci-of-at91: fix CALCR register being rewritten") Fixes: 727d836a375ad ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset") Signed-off-by: Claudiu Beznea <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2021-10-06ionic: move filter sync_needed bit setShannon Nelson2-4/+3
Move the setting of the filter-sync-needed bit to the error case in the filter add routine to be sure we're checking the live filter status rather than a copy of the pre-sync status. Fixes: 969f84394604 ("ionic: sync the filters in the work task") Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-06gve: report 64bit tx_bytes counter from gve_handle_report_stats()Eric Dumazet1-2/+3
Each tx queue maintains a 64bit counter for bytes, there is no reason to truncate this to 32bit (or this has not been documented) Fixes: 24aeb56f2d38 ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.") Signed-off-by: Eric Dumazet <[email protected]> Cc: Yangchun Fu <[email protected]> Cc: Kuo Zhao <[email protected]> Cc: David Awogbemila <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-06gve: fix gve_get_stats()Eric Dumazet1-4/+9
gve_get_stats() can report wrong numbers if/when u64_stats_fetch_retry() returns true. What is needed here is to sample values in temporary variables, and only use them after each loop is ended. Fixes: f5cedc84a30d ("gve: Add transmit and receive support") Signed-off-by: Eric Dumazet <[email protected]> Cc: Catherine Sullivan <[email protected]> Cc: Sagi Shahar <[email protected]> Cc: Jon Olson <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Luigi Rizzo <[email protected]> Cc: Jeroen de Borst <[email protected]> Cc: Tao Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-06gve: Properly handle errors in gve_assign_qplCatherine Sullivan1-1/+7
Ignored errors would result in crash. Fixes: ede3fcf5ec67f ("gve: Add support for raw addressing to the rx path") Signed-off-by: Catherine Sullivan <[email protected]> Signed-off-by: Jeroen de Borst <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-06gve: Avoid freeing NULL pointerTao Liu1-10/+17
Prevent possible crashes when cleaning up after unsuccessful initializations. Fixes: 893ce44df5658 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: Tao Liu <[email protected]> Signed-off-by: Catherine Sully <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-06gve: Correct available tx qpl checkCatherine Sullivan1-1/+1
The qpl_map_size is rounded up to a multiple of sizeof(long), but the number of qpls doesn't have to be. Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support") Signed-off-by: Catherine Sullivan <[email protected]> Signed-off-by: Jeroen de Borst <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-06net: stmmac: trigger PCS EEE to turn off on link downWong Vee Khee1-1/+5
The current implementation enable PCS EEE feature in the event of link up, but PCS EEE feature is not disabled on link down. This patch makes sure PCE EEE feature is disabled on link down. Fixes: 656ed8b015f1 ("net: stmmac: fix EEE init issue when paired with EEE capable PHYs") Signed-off-by: Wong Vee Khee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-06net: pcs: xpcs: fix incorrect steps on disable EEEWong Vee Khee1-4/+9
When Energy-Efficient Ethernet(EEE) is disable from the MAC side, we need to clear the DW_VR_MII_EEE_TRN_LPI bit of DW_VR_MII_EEE_MCTRL1 register. Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet") Cc: Michael Sit Wei Hong <[email protected]> Signed-off-by: Wong Vee Khee <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-06firmware: arm_scmi: Add proper barriers to scmi virtio deviceCristian Marussi1-4/+9
Only one single SCMI Virtio device is currently supported by this driver and it is referenced using a static global variable which is initialized once for all during probing and nullified at virtio device removal. Add proper SMP barriers to protect accesses to such device reference to ensure that the initialzation state of such device is correctly observed by all PEs at any time. Return -EBUSY, instead of -EINVAL, and a descriptive error message if more than one SCMI Virtio device is ever found and probed. Link: https://lore.kernel.org/r/[email protected] Cc: "Michael S. Tsirkin" <[email protected]> Cc: Sudeep Holla <[email protected]> Signed-off-by: Cristian Marussi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]>
2021-10-06firmware: arm_scmi: Simplify spinlocks in virtio transportCristian Marussi1-8/+21
Remove unneeded nested irqsave/irqrestore spinlocks. Add also a few descriptive comments to explain better the system behaviour at shutdown time. Link: https://lore.kernel.org/r/[email protected] Cc: "Michael S. Tsirkin" <[email protected]> Cc: Sudeep Holla <[email protected]> Signed-off-by: Cristian Marussi <[email protected]> Signed-off-by: Sudeep Holla <[email protected]>
2021-10-06drm/nouveau/debugfs: fix file release memory leakYang Yingliang1-0/+1
When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 6e9fc177399f ("drm/nouveau/debugfs: add copy of sysfs pstate interface ported to debugfs") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Signed-off-by: Karol Herbst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/nouveau/kms/nv50-: fix file release memory leakYang Yingliang1-0/+1
When using single_open() for opening, single_release() should be called, otherwise the 'op' allocated in single_open() will be leaked. Fixes: 12885ecbfe62 ("drm/nouveau/kms/nvd9-: Add CRC support") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Signed-off-by: Karol Herbst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/nouveau: avoid a use-after-free when BO init failsJeremy Cline1-3/+1
nouveau_bo_init() is backed by ttm_bo_init() and ferries its return code back to the caller. On failures, ttm_bo_init() invokes the provided destructor which should de-initialize and free the memory. Thus, when nouveau_bo_init() returns an error the gem object has already been released and the memory freed by nouveau_bo_del_ttm(). Fixes: 019cbd4a4feb ("drm/nouveau: Initialize GEM object before TTM object") Cc: Thierry Reding <[email protected]> Signed-off-by: Jeremy Cline <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Signed-off-by: Karol Herbst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06video: fbdev: gbefb: Only instantiate device when built for IP32Mark Brown1-1/+1
The gbefb driver not only registers a driver but also the device for that driver. This is all well and good when run on the IP32 machines that are supported by the driver but since the driver supports building with COMPILE_TEST we might also be building on other platforms which do not have this hardware and will crash instantiating the driver. Add an IS_ENABLED() check so we compile out the device registration if we don't have the Kconfig option for the machine enabled. Fixes: 552ccf6b259d290c0c ("video: fbdev: gbefb: add COMPILE_TEST support") Signed-off-by: Mark Brown <[email protected]> Cc: Bartlomiej Zolnierkiewicz <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06fbdev: simplefb: fix Kconfig dependenciesArnd Bergmann2-2/+4
Configurations with both CONFIG_FB_SIMPLE=y and CONFIG_DRM_SIMPLEDRM=m are allowed by Kconfig because the 'depends on !DRM_SIMPLEDRM' dependency does not disallow FB_SIMPLE as long as SIMPLEDRM is not built-in. This can however result in a build failure when cfb_fillrect() etc are then also in loadable modules: x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x1f8): undefined reference to `cfb_fillrect' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x200): undefined reference to `cfb_copyarea' x86_64-linux-ld: drivers/video/fbdev/simplefb.o:(.rodata+0x208): undefined reference to `cfb_imageblit' To work around this, change FB_SIMPLE to be a 'tristate' symbol, which still allows both to be =m together, but not one of them to be =y if the other one is =m. If a distro kernel picks this configuration, it can be determined by local policy which of the two modules gets loaded. The 'of_chosen' export is needed as this is the first loadable module referencing it. Alternatively, the Kconfig dependency could be changed to 'depends on DRM_SIMPLEDRM=n', which would forbid the configuration with both drivers. Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Acked-by: Rob Herring <[email protected]> # for drivers/of/ Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Arnd Bergmann <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Daniel Vetter <[email protected]> # fbdev support Cc: Maxime Ripard <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Peter Collingbourne <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v5.14+ Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/panel: abt-y030xx067a: yellow tint fixChristophe Branchereau1-2/+2
The previous parameters caused an unbalanced yellow tint. Fixes: 7467389bdafb ("drm/panel: Add ABT Y030XX067A 3.0" 320x480 panel") Signed-off-by: Christophe Branchereau <[email protected]> Acked-by: Sam Ravnborg <[email protected]> [Paul: Add Fixes: tag, and fix case and punctuation in commit message] Signed-off-by: Paul Cercueil <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/nouveau/fifo/ga102: initialise chid on return from channel creationBen Skeggs1-0/+3
Turns out caller isn't zero-initialised after-all. Fixes: 49b2dfc08182 ("drm/nouveau/ga102-: support ttm buffer moves via copy engine") Reported-by: Karol Herbst <[email protected]> Signed-off-by: Ben Skeggs <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Signed-off-by: Karol Herbst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/rockchip: Update crtc fixup to account for fractional clk changeChris Morgan1-14/+12
After commit 928f9e268611 ("clk: fractional-divider: Hide clk_fractional_divider_ops from wide audience") was merged it appears that the DSI panel on my Odroid Go Advance stopped working. Upon closer examination of the problem, it looks like it was the fixup in the rockchip_drm_vop.c file was causing the issue. The changes made to the clk driver appear to change some assumptions made in the fixup. After debugging the working 5.14 kernel and the no-longer working 5.15 kernel, it looks like this was broken all along but still worked, whereas after the fractional clock change it stopped working despite the issue (it went from sort-of broken to very broken). In the 5.14 kernel the dclk_vopb_frac was being requested to be set to 17000999 on my board. The clock driver was taking the value of the parent clock and attempting to divide the requested value from it (17000000/17000999 = 0), then subtracting 1 from it (making it -1), and running it through fls_long to get 64. It would then subtract the value of fd->mwidth from it to get 48, and then bit shift 17000999 to the left by 48, coming up with a very large number of 7649082492112076800. This resulted in a numerator of 65535 and a denominator of 1 from the clk driver. The driver seemingly would try again and get a correct 1:1 value later, and then move on. Output from my 5.14 kernel (with some printfs for good measure): [ 2.830066] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.839431] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.855980] Clock is dclk_vopb_frac [ 2.856004] Scale 64, Rate 7649082492112076800, Oldrate 17000999, Parent Rate 17000000, Best Numerator 65535, Best Denominator 1, fd->mwidth 16 [ 2.903529] Clock is dclk_vopb_frac [ 2.903556] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 [ 2.903579] Clock is dclk_vopb_frac [ 2.903583] Scale 0, Rate 17000000, Oldrate 17000000, Parent Rate 17000000, Best Numerator 1, Best Denominator 1, fd->mwidth 16 Contrast this with 5.15 after the clk change where the rate of 17000999 was getting passed and resulted in numerators/denomiators of 17001/ 17000. Output from my 5.15 kernel (with some printfs added for good measure): [ 2.817571] rockchip-drm display-subsystem: bound ff460000.vop (ops vop_component_ops) [ 2.826975] rockchip-drm display-subsystem: bound ff450000.dsi (ops dw_mipi_dsi_rockchip_ops) [ 2.843430] Rate 17000999, Parent Rate 17000000, Best Numerator 17018, Best Denominator 17017 [ 2.891073] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891269] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 [ 2.891281] Rate 17001000, Parent Rate 17000000, Best Numerator 17001, Best Denominator 17000 I have tested the change extensively on my Odroid Go Advance (Rockchip RK3326) and it appears to work well. However, this change will affect all Rockchip SoCs that use this driver so I believe further testing is warranted. Please note that without this change I can confirm at least all PX30s with DSI panels will stop working with the 5.15 kernel. Upon advice from Doug Anderson <[email protected]> it was decided that we would first check if the clock rate can be set exactly as requested, and only if it could not would we then add 999 to it and attempt the process again. This way we can preserve the behavior for clocks that still need it while resolving the specific issue for the PX30 and DSI panels (since it is using a fractional clock). Changes since v2: - Moved fixes to correct location. Changes since v1: - Made the addition of 999 conditional based on whether the clock subsystem can set the actual clock rate as requested. - Updated the notes in the fixup routine to reflect this new behavior. - Added reference to original commit, as this has technically been broken since then however only now is it an issue due to the clock changes. Fixes: 4e7cf74fa3b2 ("clk: fractional-divider: Export approximation algorithm to the CCF users") Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/nouveau/ga102-: support ttm buffer moves via copy engineBen Skeggs10-6/+329
We don't currently have any kind of real acceleration on Ampere GPUs, but the TTM memcpy() fallback paths aren't really designed to handle copies between different devices, such as on Optimus systems, and result in a kernel OOPS. A few options were investigated to try and fix this, but didn't work out, and likely would have resulted in a very unpleasant experience for users anyway. This commit adds just enough support for setting up a single channel connected to a copy engine, which the kernel can use to accelerate the buffer copies between devices. Userspace has no access to this incomplete channel support, but it's suitable for TTM's needs. A more complete implementation of host(fifo) for Ampere GPUs is in the works, but the required changes are far too invasive that they would be unsuitable to backport to fix this issue on current kernels. v2: fix GPFIFO length in RAMFC (reported by Karol) Signed-off-by: Ben Skeggs <[email protected]> Cc: Lyude Paul <[email protected]> Cc: Karol Herbst <[email protected]> Cc: <[email protected]> # v5.12+ Reviewed-by: Karol Herbst <[email protected]> Tested-by: Karol Herbst <[email protected]> Signed-off-by: Karol Herbst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windowsBen Skeggs1-1/+1
Prevent NVD core channel error code 67 occuring and hanging display, managed to reproduce on GA102 while testing suspend/resume scenarios. Required extension of earlier commit to fix interactions with EFI. Fixes: e78b1b545c6c ("drm/nouveau/kms/nv50: workaround EFI GOP window channel format differences") Signed-off-by: Ben Skeggs <[email protected]> Cc: Lyude Paul <[email protected]> Cc: Karol Herbst <[email protected]> Cc: <[email protected]> # v5.12+ Reviewed-by: Karol Herbst <[email protected]> Signed-off-by: Karol Herbst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/sun4i: dw-hdmi: Fix HDMI PHY clock setupJernej Skrabec3-47/+61
Recent rework, which made HDMI PHY driver a platform device, inadvertely reversed clock setup order. HW is very touchy about it. Proper way is to handle controllers resets and clocks first and HDMI PHYs second. Currently, without this fix, first mode set completely fails (nothing on HDMI monitor) on H3 era PHYs. On H6, it still somehow work. Move HDMI PHY reset & clocks handling to sun8i_hdmi_phy_init() which will assure that code is executed after controllers reset & clocks are handled. Additionally, add sun8i_hdmi_phy_deinit() which will deinit them at controllers driver unload. Tested on A64, H3, H6 and R40. Fixes: 9bf3797796f5 ("drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device") Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/vc4: hdmi: Remove unused structMaxime Ripard1-8/+0
Commitc7d30623540b ("drm/vc4: hdmi: Remove unused struct") removed the references to the vc4_hdmi_audio_widgets and vc4_hdmi_audio_routes structures, but not the structures themselves resulting in two warnings. Remove it. Fixes: c7d30623540b ("drm/vc4: hdmi: Remove unused struct") Reported-by: kernel test robot <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Dave Stevenson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06drm/kmb: Enable alpha blended second planeEdmund Dea5-15/+87
Enable one additional plane that is alpha blended on top of the primary plane. This also fixes the below warnings when building with -Warray-bounds: drivers/gpu/drm/kmb/kmb_plane.c:135:20: warning: array subscript 3 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:132:20: warning: array subscript 2 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] drivers/gpu/drm/kmb/kmb_plane.c:129:20: warning: array subscript 1 is above array bounds of 'struct layer_status[1]' [-Warray-bounds] v2: corrected previous patch dependecies so it builds Signed-off-by: Edmund Dea <[email protected]> Signed-off-by: Anitha Chrisanthus <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://patchwork.kernel.org/project/dri-devel/patch/[email protected]/ Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-06xen/balloon: fix cancelled balloon actionJuergen Gross1-6/+15
In case a ballooning action is cancelled the new kernel thread handling the ballooning might end up in a busy loop. Fix that by handling the cancelled action gracefully. While at it introduce a short wait for the BP_WAIT case. Cc: [email protected] Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") Reported-by: Marek Marczykowski-Górecki <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Tested-by: Jason Andryuk <[email protected]> Reviewed-by: Boris Ostrovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2021-10-06bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893Tony Lindgren1-0/+3
Commit 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") should have also added the quirk for dra7 dcan1 in addition to dcan2 for errata i893 handling. Let's also pass the quirk flag for legacy mode booting for if "ti,hwmods" dts property is used with related dcan hwmod data. This should be only needed if anybody needs to git bisect earlier stable trees though. Fixes: 94f6345712b3 ("bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO") Signed-off-by: Tony Lindgren <[email protected]>
2021-10-06Merge branch 'pruss-fix' into fixesTony Lindgren5155-157372/+288101
Merge in a fix for pruss reset issue caused by enabling pruss for am335x.
2021-10-05drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resumeGuchun Chen2-0/+7
In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen. Fixes: c9a6b82f45e2 ("drm/amdgpu: Implement DPC recovery") Suggested-by: Andrey Grodzovsky <[email protected]> Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Andrey Grodzovsky <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-05drm/amdgpu: init iommu after amdkfd device initYifan Zhang1-4/+4
This patch is to fix clinfo failure in Raven/Picasso: Number of platforms: 1 Platform Profile: FULL_PROFILE Platform Version: OpenCL 2.2 AMD-APP (3364.0) Platform Name: AMD Accelerated Parallel Processing Platform Vendor: Advanced Micro Devices, Inc. Platform Extensions: cl_khr_icd cl_amd_event_callback Platform Name: AMD Accelerated Parallel Processing Number of devices: 0 Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: James Zhu <[email protected]> Tested-by: James Zhu <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-05drm/amdkfd: remove redundant iommu cleanup codeYifan Zhang1-7/+1
kfd_resume doesn't involve iommu operation, remove redundant iommu cleanup code. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: James Zhu <[email protected]> Tested-by: James Zhu <[email protected]> Acked-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-05drm/amdgpu/display: fix dependencies for DRM_AMD_DC_SIAlex Deucher1-0/+2
Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-05drm/amdgpu: During s0ix don't wait to signal GFXOFFLijo Lazar1-2/+12
In the rare event when GFX IP suspend coincides with a s0ix entry, don't schedule a delayed work, instead signal PMFW immediately to allow GFXOFF entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be signaled about GFXOFF status before amd-pmc module passes OS HINT to PMFW telling that everything is ready for a safe s0ix entry. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712 Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-10-05drm/amdkfd: fix a potential ttm->sg memory leakLang Yu1-0/+1
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it! Fixes: 264fb4d332f5 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.