aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-11-07dasd: remove dead codeJens Axboe1-17/+5
Since e443343e509a we haven't had a request_fn attached to this driver, hence any code inside an if (q->request_fn) is unreachable. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") [sth: Keep and fix the dasd_info->chanq_len counter.] Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07scsi: kill off the legacy IO pathJens Axboe14-650/+70
This removes the legacy (non-mq) IO path for SCSI. Cc: linux-scsi@vger.kernel.org Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07scsi: provide mq_ops->busy() hookJens Axboe1-0/+6
Only the SCSI legacy path provides a way to check if target is currently busy, provide the same for the MQ path. Cc: linux-scsi@vger.kernel.org Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07ide: convert to blk-mqJens Axboe7-177/+228
ide-disk and ide-cd tested as working just fine, ide-tape and ide-floppy haven't. But the latter don't require changes, so they should work without issue. Add helper function to insert a request from a work queue, since we cannot invoke the blk-mq request insertion from IRQ context. Cc: David Miller <davem@davemloft.net> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07mspro_block: convert to blk-mqJens Axboe1-55/+66
Straight forward conversion, there's room for improvement. Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07ms_block: convert to blk-mqJens Axboe2-49/+62
Straight forward conversion, room for optimization in how everything is punted to a work queue. Also looks plenty racy all over the map, with the state changes. I fixed a bunch of them up while doing the conversion, but there are surely more. Cc: Maxim Levitsky <maximlevitsky@gmail.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07sunvdc: convert to blk-mqJens Axboe1-51/+98
Convert from the old request_fn style driver to blk-mq. Cc: David Miller <davem@davemloft.net> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07null_blk: Add conventional zone configuration for zoned supportMasato Suzuki3-1/+34
Allow the creation of conventional zones by adding the zone_nr_conv configuration attribute. This new attribute is used only for zoned devices and indicates the number of conventional zones to create. The default value is 0. Since host-managed zoned block devices must always have at least one sequential zone, if the value of zone_nr_conv is larger than or equal to the total number of zones of the device nr_zones, zone_nr_conv is automatically changed to nr_zones - 1. Reviewed-by: Matias Bjorling <matias.bjorling@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Masato Suzuki <masato.suzuki@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07Merge tag 'hwmon-for-v4.20-rc2' of ↵Linus Torvalds2-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Remove bogus __init annotations in ibmpowernv driver - Fix double-free in error handling of __hwmon_device_register() * tag 'hwmon-for-v4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ibmpowernv) Remove bogus __init annotations hwmon: (core) Fix double-free in __hwmon_device_register()
2018-11-07Merge branch 'for-linus' of ↵Linus Torvalds7-5/+65
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - hid.git is moving towards group maintainership (where group is myself and Benjamin Tissoires), therefore this pull request updates MAINTAINERS accordingly - fix for hid-asus config dependency from Arnd Bergmann - two device-specific quirks for i2c-hid from Julian Sax and Kai-Heng Feng - other few small assorted fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: fix up .raw_event() documentation HID: asus: fix build warning wiht CONFIG_ASUS_WMI disabled HID: i2c-hid: add Direkt-Tek DTLAPY133-1 to descriptor override HID: moving to group maintainership model HID: alps: allow incoming reports when only the trackstick is opened Revert "HID: add NOGET quirk for Eaton Ellipse MAX UPS" HID: i2c-hid: Add a small delay after sleep command for Raydium touchpanel HID: hiddev: fix potential Spectre v1
2018-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds17-277/+250
Pull networking fixes from David Miller: 1) Handle errors mid-stream of an all dump, from Alexey Kodanev. 2) Fix build of openvswitch with certain combinations of netfilter options, from Arnd Bergmann. 3) Fix interactions between GSO and BQL, from Eric Dumazet. 4) Don't put a '/' in RTL8201F's sysfs file name, from Holger Hoffstätte. 5) S390 qeth driver fixes from Julian Wiedmann. 6) Allow ipv6 link local addresses for netconsole when both source and destination are link local, from Matwey V. Kornilov. 7) Fix the BPF program address seen in /proc/kallsyms, from Song Liu. 8) Initialize mutex before use in dsa microchip driver, from Tristram Ha. 9) Out-of-bounds access in hns3, from Yunsheng Lin. 10) Various netfilter fixes from Stefano Brivio, Jozsef Kadlecsik, Jiri Slaby, Florian Westphal, Eric Westbrook, Andrey Ryabinin, and Pablo Neira Ayuso. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (50 commits) net: alx: make alx_drv_name static net: bpfilter: fix iptables failure if bpfilter_umh is disabled sock_diag: fix autoloading of the raw_diag module net: core: netpoll: Enable netconsole IPv6 link local address ipv6: properly check return value in inet6_dump_all() rtnetlink: restore handling of dumpit return value in rtnl_dump_all() net/ipv6: Move anycast init/cleanup functions out of CONFIG_PROC_FS bonding/802.3ad: fix link_failure_count tracking net: phy: realtek: fix RTL8201F sysfs name sctp: define SCTP_SS_DEFAULT for Stream schedulers sctp: fix strchange_flags name for Stream Change Event mlxsw: spectrum: Fix IP2ME CPU policer configuration openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELS qed: fix link config error handling net: hns3: Fix for out-of-bounds access when setting pfc back pressure net/mlx4_en: use __netdev_tx_sent_queue() net: do not abort bulk send on BQL status net: bql: add __netdev_tx_sent_queue() s390/qeth: report 25Gbit link speed s390/qeth: sanitize ARP requests ...
2018-11-06HID: asus: fix build warning wiht CONFIG_ASUS_WMI disabledArnd Bergmann1-0/+3
asus_wmi_evaluate_method() is an empty dummy function when CONFIG_ASUS_WMI is disabled, or not reachable from a built-in device driver. This leads to a theoretical evaluation of an uninitialized variable that the compiler complains about, failing to check that the hardcoded return value makes this an unreachable code path: In file included from include/linux/printk.h:336, from include/linux/kernel.h:14, from include/linux/list.h:9, from include/linux/dmi.h:5, from drivers/hid/hid-asus.c:29: drivers/hid/hid-asus.c: In function 'asus_input_configured': include/linux/dynamic_debug.h:135:3: error: 'value' may be used uninitialized in this function [-Werror=maybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^~~~~~~~~~~~~~~~~ drivers/hid/hid-asus.c:359:6: note: 'value' was declared here u32 value; ^~~~~ With an extra IS_ENABLED() check, the warning goes away. Fixes: 3b692c55e58d ("HID: asus: only support backlight when it's not driven by WMI") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-11-06Merge branch 'master' into for-4.20/upstream-fixesJiri Kosina3580-79221/+259142
Pull in a merge commit that brought in 3b692c55e58d ("HID: asus: only support backlight when it's not driven by WMI") so that fixup could be applied on top of it.
2018-11-05net: alx: make alx_drv_name staticRasmus Villemoes2-2/+1
alx_drv_name is not used outside main.c, so there's no reason for it to have external linkage. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-04bonding/802.3ad: fix link_failure_count trackingJarod Wilson1-2/+2
Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values were read, to fix a problem with slaves getting into weird states, but in the process, broke tracking of link failures, as going straight to BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted) means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because !link_state was already true, we never incremented commit, and never got a chance to call bond_miimon_commit(), where slave->link_failure_count would be incremented. I believe the simple fix here is to mark the slave as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from _FAIL to either _UP or _DOWN, and in the latter case, we now get proper incrementing of link_failure_count again. Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event") CC: Mahesh Bandewar <maheshb@google.com> CC: David S. Miller <davem@davemloft.net> CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-04net: phy: realtek: fix RTL8201F sysfs nameHolger Hoffstätte1-1/+1
Since 4.19 the following error in sysfs has appeared when using the r8169 NIC driver: $cd /sys/module/realtek/drivers $ls -l ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory [..garbled dir entries follow..] Apparently the forward slash in "10/100Mbps Ethernet" is interpreted as directory separator that leads nowhere, and was introduced in commit 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions"). Fix this by removing the offending slash in the driver name. Other drivers in net/phy seem to have the same problem, but I cannot test/verify them. Fixes: 513588dd44b ("net: phy: realtek: add RTL8201F phy-id and functions") Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-04hwmon: (ibmpowernv) Remove bogus __init annotationsGeert Uytterhoeven1-4/+3
If gcc decides not to inline make_sensor_label(): WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label() The function .create_device_attrs() references the function __init .make_sensor_label(). This is often because .create_device_attrs lacks a __init annotation or the annotation of .make_sensor_label is wrong. As .probe() can be called after freeing of __init memory, all __init annotiations in the driver are bogus, and should be removed. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-11-04hwmon: (core) Fix double-free in __hwmon_device_register()Dmitry Osipenko1-4/+4
Fix double-free that happens when thermal zone setup fails, see KASAN log below. ================================================================== BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: [<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24) [<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0) [<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250) [<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88) [<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200) [<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18) [<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294) [<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c) [<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8) [<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4) [<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578) [<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384) [<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4) [<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4) [<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c) [<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8) [<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c) [<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20) [<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec) [<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4) [<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c) [<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc) [<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240) [<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38) Exception stack(0xcf743fb0 to 0xcf743ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Allocated by task 132: kasan_kmalloc.part.1+0x58/0xf4 kasan_kmalloc+0x90/0xa4 kmem_cache_alloc_trace+0x90/0x2a0 __hwmon_device_register+0xbc/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Freed by task 132: __kasan_slab_free+0x12c/0x200 kasan_slab_free+0x14/0x18 kfree+0x90/0x294 hwmon_dev_release+0x1c/0x20 device_release+0x4c/0xe8 kobject_put+0xac/0x11c device_unregister+0x2c/0x30 __hwmon_device_register+0xa58/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Cc: <stable@vger.kernel.org> # v4.15+ Fixes: 47c332deb8e8 ("hwmon: Deal with errors from the thermal subsystem") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-11-04Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds2-0/+3
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
2018-11-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds4-0/+347
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-04Merge tag 'ntb-4.20' of git://github.com/jonmason/ntbLinus Torvalds6-110/+429
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
2018-11-03mlxsw: spectrum: Fix IP2ME CPU policer configurationShalom Toledo1-1/+0
The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03qed: fix link config error handlingArnd Bergmann1-2/+5
gcc-8 notices that qed_mcp_get_transceiver_data() may fail to return a result to the caller: drivers/net/ethernet/qlogic/qed/qed_mcp.c: In function 'qed_mcp_trans_speed_mask': drivers/net/ethernet/qlogic/qed/qed_mcp.c:1955:2: error: 'transceiver_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] When an error is returned by qed_mcp_get_transceiver_data(), we should propagate that to the caller of qed_mcp_trans_speed_mask() rather than continuing with uninitialized data. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-12/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
2018-11-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
2018-11-03Merge branch 'core/urgent' into x86/urgent, to pick up objtool fixIngo Molnar2394-52991/+197761
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-11-03net: hns3: Fix for out-of-bounds access when setting pfc back pressureYunsheng Lin1-6/+4
The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03net/mlx4_en: use __netdev_tx_sent_queue()Eric Dumazet1-2/+4
doorbell only depends on xmit_more and netif_tx_queue_stopped() Using __netdev_tx_sent_queue() avoids messing with BQL stop flag, and is more generic. This patch increases performance on GSO workload by keeping doorbells to the minimum required. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge tag 'armsoc-fixes' of ↵Linus Torvalds3-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
2018-11-03Merge tag 'kbuild-v4.20-2' of ↵Linus Torvalds3-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - clean-up leftovers in Kconfig files - remove stale oldnoconfig and silentoldconfig targets - remove unneeded cc-fullversion and cc-name variables - improve merge_config script to allow overriding option prefix * tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove cc-name variable kbuild: replace cc-name test with CONFIG_CC_IS_CLANG merge_config.sh: Allow to define config prefix kbuild: remove unused cc-fullversion variable kconfig: remove silentoldconfig target kconfig: remove oldnoconfig target powerpc: PCI_MSI needs PCI powerpc: remove CONFIG_MCA leftovers powerpc: remove CONFIG_PCI_QSPAN scsi: aha152x: rename the PCMCIA define
2018-11-03s390/qeth: report 25Gbit link speedJulian Wiedmann2-2/+20
This adds the various identifiers for 25Gbit cards, and wires them up into sysfs and ethtool. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: sanitize ARP requestsJulian Wiedmann4-79/+34
The ARP_{ADD,REMOVE}_ENTRY cmd structs contain reserved fields. Introduce a common helper that doesn't raw-copy the user-provided data into the cmd, but only sets those fields that are strictly needed for the command. This also sets the correct command length for ARP_REMOVE_ENTRY. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: fix initial operstateJulian Wiedmann4-10/+25
Setting the carrier 'on' for an unregistered netdevice doesn't update its operstate. Fix this by delaying the update until the netdevice has been registered. Fixes: 91cc98f51e3d ("s390/qeth: remove duplicated carrier state tracking") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: unregister netdevice only when registeredJulian Wiedmann3-4/+11
qeth only registers its netdevice when the qeth device is first set online. Thus a device that has never been set online will trigger a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when removed. Fix this by protecting the unregister step, just like we already protect against repeated registering of the netdevice. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Reported-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: fix HiperSockets snifferJulian Wiedmann1-3/+5
Sniffing mode for L3 HiperSockets requires that no IP addresses are registered with the HW. The preferred way to achieve this is for userspace to delete all the IPs on the interface. But qeth is expected to also tolerate a configuration where that is not the case, by skipping the IP registration when in sniffer mode. Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") reworked the IP registration logic in the L3 subdriver, this no longer works. When the qeth device is set online, qeth_l3_recover_ip() now unconditionally registers all unicast addresses from our internal IP table. While we could fix this particular problem by skipping qeth_l3_recover_ip() on a sniffer device, the more future-proof change is to skip the IP address registration at the lowest level. This way we a) catch any future code path that attempts to register an IP address without considering the sniffer scenario, and b) continue to build up our internal IP table, so that if sniffer mode is switched off later we can operate just like normal. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03s390/qeth: sanitize strings in debug messagesJulian Wiedmann4-151/+119
As Documentation/s390/s390dbf.txt states quite clearly, using any pointer in sprinf-formatted s390dbf debug entries is dangerous. The pointers are dereferenced whenever the trace file is read from. So if the referenced data has a shorter life-time than the trace file, any read operation can result in a use-after-free. So rip out all hazardous use of indirect data, and replace any usage of dev_name() and such by the Bus ID number. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds16-50/+52
Pull more SCSI updates from James Bottomley: "This is a set of minor small (and safe changes) that didn't make the initial pull request plus some bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mvsas: Remove set but not used variable 'id' scsi: qla2xxx: Remove two arguments from qlafx00_error_entry() scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res' scsi: qla2xxx: Remove a set-but-not-used variable scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze scsi: qla2xxx: Declare local functions 'static' scsi: qla2xxx: Improve several kernel-doc headers scsi: qla2xxx: Modify fall-through annotations scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb scsi: mvsas: Use dma_pool_zalloc scsi: target: Don't request modules that aren't even built scsi: target: Set response length for REPORT TARGET PORT GROUPS
2018-11-03net: systemport: Protect stop from timeoutFlorian Fainelli1-8/+7
A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcm_sysport_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcm_sysport_netif_stop. There are currently only two users of the bcm_sysport_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcm_sysport_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcm_sysport_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcm_sysport_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcm_sysport_netif_start so it is moved into the driver open service. Fixes: 40755a0fce17 ("net: systemport: add suspend and resume support") Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-03net: bcmgenet: protect stop from timeoutDoug Berger1-6/+7
A timing hazard exists when the network interface is stopped that allows a watchdog timeout to be processed by a separate core in parallel. This creates the potential for the timeout handler to wake the queues while the driver is shutting down, or access registers after their clocks have been removed. The more common case is that the watchdog timeout will produce a warning message which doesn't lead to a crash. The chances of this are greatly increased by the fact that bcmgenet_netif_stop stops the transmit queues which can easily precipitate a watchdog time- out because of stale trans_start data in the queues. This commit corrects the behavior by ensuring that the watchdog timeout is disabled before enterring bcmgenet_netif_stop. There are currently only two users of the bcmgenet_netif_stop function: close and suspend. The close case already handles the issue by exiting the RUNNING state before invoking the driver close service. The suspend case now performs the netif_device_detach to exit the PRESENT state before the call to bcmgenet_netif_stop rather than after it. These behaviors prevent any future scheduling of the driver timeout service during the window. The netif_tx_stop_all_queues function in bcmgenet_netif_stop is replaced with netif_tx_disable to ensure synchronization with any transmit or timeout threads that may already be executing on other cores. For symmetry, the netif_device_attach call upon resume is moved to after the call to bcmgenet_netif_start. Since it wakes the transmit queues it is not necessary to invoke netif_tx_start_all_queues from bcmgenet_netif_start so it is moved into the driver open service. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02net: dsa: microchip: initialize mutex before useTristram Ha1-5/+5
Initialize mutex before use. Avoid kernel complaint when CONFIG_DEBUG_LOCK_ALLOC is enabled. Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02usbnet: smsc95xx: disable carrier check while suspendingFrieder Schrempf1-0/+7
We need to make sure, that the carrier check polling is disabled while suspending. Otherwise we can end up with usbnet_read_cmd() being issued when only usbnet_read_cmd_nopm() is allowed. If this happens, read operations lock up. Fixes: d69d169493 ("usbnet: smsc95xx: fix link detection for disabled autonegotiation") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Raghuram Chary J <RaghuramChary.Jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-02clocksource/drivers/c-sky: Add gx6605s SOC system timerGuo Ren3-0/+163
The driver is for gx6605s SOC system timer and there are two same timers in gx6605s. We use one for clkevt and another one for clksrc. The timer is mmio map to access, so we need give mmio address in dts. The counter at 0x0 offset is clock event. The counter at 0x40 offset is clock source. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02clocksource/drivers/c-sky: Add C-SKY SMP timerGuo Ren3-0/+184
The driver is for C-SKY SMP timer. It only supports oneshot event and 32bit overflow for clocksource. Per cpu core has one timer and all timers share one clock-counter-input from the same clocksource. This use mfcr&mtcr instructions to access the regs. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-blockLinus Torvalds6-13/+21
Pull block layer fixes from Jens Axboe: "The biggest part of this pull request is the revert of the blkcg cleanup series. It had one fix earlier for a stacked device issue, but another one was reported. Rather than play whack-a-mole with this, revert the entire series and try again for the next kernel release. Apart from that, only small fixes/changes. Summary: - Indentation fixup for mtip32xx (Colin Ian King) - The blkcg cleanup series revert (Dennis Zhou) - Two NVMe fixes. One fixing a regression in the nvme request initialization in this merge window, causing nvme-fc to not work. The other is a suspend/resume p2p resource issue (James, Keith) - Fix sg discard merge, allowing us to merge in cases where we didn't before (Jianchao Wang) - Call rq_qos_exit() after the queue is frozen, preventing a hang (Ming) - Fix brd queue setup, fixing an oops if we fail setting up all devices (Ming)" * tag 'for-linus-20181102' of git://git.kernel.dk/linux-block: nvme-pci: fix conflicting p2p resource adds nvme-fc: fix request private initialization blkcg: revert blkcg cleanups series block: brd: associate with queue until adding disk block: call rq_qos_exit() after queue is frozen mtip32xx: clean an indentation issue, remove extraneous tabs block: fix the DISCARD request merge
2018-11-02Merge tag 'pwm/for-4.20-rc1' of ↵Linus Torvalds9-36/+97
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "This series contains a number of improvements to existing drivers, such as LPSS. Some drivers, such as renesas-tpu and rcar get support for more SoC generations. To round things off this fixes an issue with the sysfs interface" * tag 'pwm/for-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: lpss: Only set update bit if we are actually changing the settings pwm: lpss: Force runtime-resume on suspend on Cherry Trail pwm: Enable TI ECAP driver for ARCH_K3 dt-bindings: pwm: tiecap: Add TI AM654 SoC specific compatible dt-bindings: pwm: rcar: Add r8a774a1 support pwm: Send a uevent on the pwmchip device upon channel sysfs (un)export Revert "pwm: Set class for exported channels in sysfs" dt-bindings: pwm: renesas-tpu: Document r8a7744 support dt-bindings: pwm: rcar: Add r8a7744 support dt-bindings: pwm: renesas: tpu: Document R8A779{7|8}0 bindings dt-bindings: pwm: renesas: pwm-rcar: Document R8A779{7|8}0 bindings dt-bindings: pwm: renesas: tpu: Fix "compatible" prop description pwm: Use SPDX identifier for Renesas drivers pwm: lpss: Add get_state callback pwm: lpss: Release runtime-pm reference from the driver's remove callback pwm: lpss: Check PWM powerstate after resume on Cherry Trail devices pwm: lpss: Move struct pwm_lpss_chip definition to the header file pwm: lpss: Add ACPI HID for second PWM controller on Cherry Trail devices ACPI / PM: Export acpi_device_get_power() for use by modular build drivers pwm: tegra: Remove gratuituous blank line
2018-11-02soc: ti: QMSS: Fix usage of irq_set_affinity_hintMarc Zyngier3-14/+22
The Keystone QMSS driver is pretty damaged, in the sense that it does things like this: irq_set_affinity_hint(irq, to_cpumask(&cpu_map)); where cpu_map is a local variable. As we leave the function, this will point to nowhere-land, and things will end-up badly. Instead, let's use a proper cpumask that gets allocated, giving the driver a chance to actually work with things like irqbalance as well as have a hypothetical 64bit future. Cc: stable@vger.kernel.org Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-02Merge tag 'edac_for_4.20_2' of ↵Linus Torvalds2-13/+181
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull more EDAC updates from Borislav Petkov: "The second part of the EDAC pile which contains the ADXL user and a build fix which addresses a not-so-sensical .config but fixes randconfig builds people do: - skx_edac: Address translation for NVDIMMs (Tony Luck and Qiuxu Zhuo) - ACPI_ADXL build fix" [ I don't think "sensical" is a word, particularly when used in the context of actually meaning "nonsensical", but I like it - Linus ] * tag 'edac_for_4.20_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, skx: Fix randconfig builds EDAC, skx_edac: Add address translation for non-volatile DIMMs
2018-11-02Merge tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds29-170/+287
Pull drm fixes from Dave Airlie: "Pretty much a normal fixes pull pre-rc1, mostly amdgpu fixes, one i915 link training regression fix, and a couple of minor panel/bridge fixes and a panel quirk" * tag 'drm-next-2018-11-02' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default" drm/amd/pp: Print warning if od_sclk/mclk out of range drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10 drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7 drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled drm/amdgpu: Fix skipping hangged job reset during gpu recover. drm/amd/powerplay: revise Vega20 pptable version check drm/amd/display: set backlight level limit to 1 drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1 drm/bridge: ti-sn65dsi86: Remove the mystery delay drm/panel: simple: Add "no-hpd" delay for Innolux TV123WAM drm/panel: simple: Support panels with HPD where HPD isn't connected dt-bindings: drm/panel: simple: Add no-hpd property drm/edid: Add 6 bpc quirk for BOE panel. drm/amdgpu: fix reporting of failed msg sent to SMU (v2) drm/amdgpu: Fix compute ring 1.0.0 failure after reset drm/amdgpu: fix VM leaf walking drm/amdgpu: fix amdgpu_vm_fini drm/amd/powerplay: commonize the API for retrieving current clocks ...
2018-11-02nvme-pci: fix conflicting p2p resource addsKeith Busch1-1/+4
The nvme pci driver had been adding its CMB resource to the P2P DMA subsystem everytime on on a controller reset. This results in the following warning: ------------[ cut here ]------------ nvme 0000:00:03.0: Conflicting mapping in same section WARNING: CPU: 7 PID: 81 at kernel/memremap.c:155 devm_memremap_pages+0xa6/0x380 ... Call Trace: pci_p2pdma_add_resource+0x153/0x370 nvme_reset_work+0x28c/0x17b1 [nvme] ? add_timer+0x107/0x1e0 ? dequeue_entity+0x81/0x660 ? dequeue_entity+0x3b0/0x660 ? pick_next_task_fair+0xaf/0x610 ? __switch_to+0xbc/0x410 process_one_work+0x1cf/0x350 worker_thread+0x215/0x3d0 ? process_one_work+0x350/0x350 kthread+0x107/0x120 ? kthread_park+0x80/0x80 ret_from_fork+0x1f/0x30 ---[ end trace f7ea76ac6ee72727 ]--- nvme nvme0: failed to register the CMB This patch fixes this by registering the CMB with P2P only once. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-02nvme-fc: fix request private initializationJames Smart1-1/+1
The patch made to avoid Coverity reporting of out of bounds access on aen_op moved the assignment of a pointer, leaving it null when it was subsequently used to calculate a private pointer. Thus the private pointer was bad. Move/correct the private pointer initialization to be in sync with the patch. Fixes: 0d2bdf9f4134 ("nvme-fc: rework the request initialization code") Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Powered by cgit, Gruvboxed by Blaster4385.