aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-02-22drm: implement top-down allocation methodArunpravin2-5/+34
Implemented a function which walk through the order list, compares the offset and returns the maximum offset block, this method is unpredictable in obtaining the high range address blocks which depends on allocation and deallocation. for instance, if driver requests address at a low specific range, allocator traverses from the root block and splits the larger blocks until it reaches the specific block and in the process of splitting, lower orders in the freelist are occupied with low range address blocks and for the subsequent TOPDOWN memory request we may return the low range blocks.To overcome this issue, we may go with the below approach. The other approach, sorting each order list entries in ascending order and compares the last entry of each order list in the freelist and return the max block. This creates sorting overhead on every drm_buddy_free() request and split up of larger blocks for a single page request. v2: - Fix alignment issues(Matthew Auld) - Remove unnecessary list_empty check(Matthew Auld) - merged the below patch to see the feature in action - add top-down alloc support to i915 driver Signed-off-by: Arunpravin <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2022-02-22regulator: da9121: Remove surplus DA9141 parametersAdam Ward1-4/+0
Remove ramp_delay/enable_time values - subject to OTP, incorrect Signed-off-by: Adam Ward <[email protected]> Link: https://lore.kernel.org/r/a175201b4a7ea323c6a70d77f7f6d2124bfc0bed.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <[email protected]>
2022-02-22regulator: da9121: Fix DA914x voltage valueAdam Ward1-1/+1
Update DA9141/2 max voltage to match spec change Signed-off-by: Adam Ward <[email protected]> Link: https://lore.kernel.org/r/9d1ec5b6db70d27f56d05b8a0139fc0840f03e20.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <[email protected]>
2022-02-22regulator: da9121: Fix DA914x current valuesAdam Ward1-5/+5
Update DA9141/2 ranges to correct errors Signed-off-by: Adam Ward <[email protected]> Link: https://lore.kernel.org/r/cd5732c5061ce49dcfbcebb306d12ba1664b4ea6.1645489455.git.Adam.Ward.opensource@diasemi.com Signed-off-by: Mark Brown <[email protected]>
2022-02-22drm: improve drm_buddy_alloc functionArunpravin3-111/+250
- Make drm_buddy_alloc a single function to handle range allocation and non-range allocation demands - Implemented a new function alloc_range() which allocates the requested power-of-two block comply with range limitations - Moved order computation and memory alignment logic from i915 driver to drm buddy v2: merged below changes to keep the build unbroken - drm_buddy_alloc_range() becomes obsolete and may be removed - enable ttm range allocation (fpfn / lpfn) support in i915 driver - apply enhanced drm_buddy_alloc() function to i915 driver v3(Matthew Auld): - Fix alignment issues and remove unnecessary list_empty check - add more validation checks for input arguments - make alloc_range() block allocations as bottom-up - optimize order computation logic - replace uint64_t with u64, which is preferred in the kernel v4(Matthew Auld): - keep drm_buddy_alloc_range() function implementation for generic actual range allocations - keep alloc_range() implementation for end bias allocations v5(Matthew Auld): - modify drm_buddy_alloc() passing argument place->lpfn to lpfn as place->lpfn will currently always be zero for i915 v6(Matthew Auld): - fixup potential uaf - If we are unlucky and can't allocate enough memory when splitting blocks, where we temporarily end up with the given block and its buddy on the respective free list, then we need to ensure we delete both blocks, and no just the buddy, before potentially freeing them - fix warnings reported by kernel test robot <[email protected]> v7(Matthew Auld): - revert fixup potential uaf - keep __alloc_range() add node to the list logic same as drm_buddy_alloc_blocks() by having a temporary list variable - at drm_buddy_alloc_blocks() keep i915 range_overflows macro and add a new check for end variable v8: - fix warnings reported by kernel test robot <[email protected]> v9(Matthew Auld): - remove DRM_BUDDY_RANGE_ALLOCATION flag - remove unnecessary function description v10: - keep DRM_BUDDY_RANGE_ALLOCATION flag as removing the flag and replacing with (end < size) logic fails amdgpu driver load Signed-off-by: Arunpravin <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Signed-off-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-22driver core: Free DMA range map when device is releasedMårten Lindahl1-0/+5
When unbinding/binding a driver with DMA mapped memory, the DMA map is not freed before the driver is reloaded. This leads to a memory leak when the DMA map is overwritten when reprobing the driver. This can be reproduced with a platform driver having a dma-range: dummy { ... #address-cells = <0x2>; #size-cells = <0x2>; ranges; dma-ranges = <...>; ... }; and then unbinding/binding it: ~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/unbind DMA map object 0xffffff800b0ae540 still being held by &pdev->dev ~# echo soc:dummy >/sys/bus/platform/drivers/<driver>/bind ~# echo scan > /sys/kernel/debug/kmemleak ~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffff800b0ae540 (size 64): comm "sh", pid 833, jiffies 4295174550 (age 2535.352s) hex dump (first 32 bytes): 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 80 00 00 00 00 00 00 00 80 00 00 00 00 ................ backtrace: [<ffffffefd1694708>] create_object.isra.0+0x108/0x344 [<ffffffefd1d1a850>] kmemleak_alloc+0x8c/0xd0 [<ffffffefd167e2d0>] __kmalloc+0x440/0x6f0 [<ffffffefd1a960a4>] of_dma_get_range+0x124/0x220 [<ffffffefd1a8ce90>] of_dma_configure_id+0x40/0x2d0 [<ffffffefd198b68c>] platform_dma_configure+0x5c/0xa4 [<ffffffefd198846c>] really_probe+0x8c/0x514 [<ffffffefd1988990>] __driver_probe_device+0x9c/0x19c [<ffffffefd1988cd8>] device_driver_attach+0x54/0xbc [<ffffffefd1986634>] bind_store+0xc4/0x120 [<ffffffefd19856e0>] drv_attr_store+0x30/0x44 [<ffffffefd173c9b0>] sysfs_kf_write+0x50/0x60 [<ffffffefd173c1c4>] kernfs_fop_write_iter+0x124/0x1b4 [<ffffffefd16a013c>] new_sync_write+0xdc/0x160 [<ffffffefd16a256c>] vfs_write+0x23c/0x2a0 [<ffffffefd16a2758>] ksys_write+0x64/0xec To prevent this we should free the dma_range_map when the device is released. Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Cc: stable <[email protected]> Suggested-by: Rob Herring <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Mårten Lindahl <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-22ata: pata_hpt37x: fix PCI clock detectionSergey Shtylyov1-2/+2
The f_CNT register (at the PCI config. address 0x78) is 16-bit, not 8-bit! The bug was there from the very start... :-( Signed-off-by: Sergey Shtylyov <[email protected]> Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Cc: [email protected] Signed-off-by: Damien Le Moal <[email protected]>
2022-02-21drm/amd/display: For vblank_disable_immediate, check PSR is really usedMichel Dänzer1-8/+9
Even if PSR is allowed for a present GPU, there might be no eDP link which supports PSR. Fixes: 708978487304 ("drm/amdgpu/display: Only set vblank_disable_immediate when PSR is not enabled") Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-21drm/amd/pm: fix some OEM SKU specific stability issuesEvan Quan1-1/+31
Add a quirk in sienna_cichlid_ppt.c to fix some OEM SKU specific stability issues. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-21drm/amdgpu: disable MMHUB PG for PicassoEvan Quan1-1/+4
MMHUB PG needs to be disabled for Picasso for stability reasons. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-21drm/amd/display: Protect update_bw_bounding_box FPU code.Bas Nieuwenhuizen2-2/+7
For DCN3/3.01/3.02 at least these use the fpu. v2: squash in build fix for when DCN is not enabled (Leo) Signed-off-by: Bas Nieuwenhuizen <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-02-21sc16is7xx: Fix for incorrect data being transmittedPhil Elwell1-0/+3
UART drivers are meant to use the port spinlock within certain methods, to protect against reentrancy. The sc16is7xx driver does very little locking, presumably because when added it triggers "scheduling while atomic" errors. This is due to the use of mutexes within the regmap abstraction layer, and the mutex implementation's habit of sleeping the current thread while waiting for access. Unfortunately this lack of interlocking can lead to corruption of outbound data, which occurs when the buffer used for I2C transmission is used simultaneously by two threads - a work queue thread running sc16is7xx_tx_proc, and an IRQ thread in sc16is7xx_port_irq, both of which can call sc16is7xx_handle_tx. An earlier patch added efr_lock, a mutex that controls access to the EFR register. This mutex is already claimed in the IRQ handler, and all that is required is to claim the same mutex in sc16is7xx_tx_proc. See: https://github.com/raspberrypi/linux/issues/4885 Fixes: 6393ff1c4435 ("sc16is7xx: Use threaded IRQ") Cc: stable <[email protected]> Signed-off-by: Phil Elwell <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21tty: n_gsm: fix deadlock in gsmtty_open()[email protected]1-0/+3
In the current implementation the user may open a virtual tty which then could fail to establish the underlying DLCI. The function gsmtty_open() gets stuck in tty_port_block_til_ready() while waiting for a carrier rise. This happens if the remote side fails to acknowledge the link establishment request in time or completely. At some point gsm_dlci_close() is called to abort the link establishment attempt. The function tries to inform the associated virtual tty by performing a hangup. But the blocking loop within tty_port_block_til_ready() is not informed about this event. The patch proposed here fixes this by resetting the initialization state of the virtual tty to ensure the loop exits and triggering it to make tty_port_block_til_ready() return. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21tty: n_gsm: fix wrong modem processing in convergence layer type 2[email protected]1-9/+14
The function gsm_process_modem() exists to handle modem status bits of incoming frames. This includes incoming MSC (modem status command) frames and convergence layer type 2 data frames. The function, however, was only designed to handle MSC frames as it expects the command length. Within gsm_dlci_data() it is wrongly assumed that this is the same as the data frame length. This is only true if the data frame contains only 1 byte of payload. This patch names the length parameter of gsm_process_modem() in a generic manner to reflect its association. It also corrects all calls to the function to handle the variable number of modem status octets correctly in both cases. Fixes: 7263287af93d ("tty: n_gsm: Fixed logic to decode break signal from modem status") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21tty: n_gsm: fix wrong tty control line for flow control[email protected]1-4/+4
tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle(). Both functions propagate the outgoing hardware flow control state to the remote side via MSC (modem status command) frames. The local state is taken from the RTS (ready to send) flag of the tty. However, RTS gets mapped to DTR (data terminal ready), which is wrong. This patch corrects this by mapping RTS to RTS. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21tty: n_gsm: fix NULL pointer access due to DLCI release[email protected]1-1/+6
The here fixed commit made the tty hangup asynchronous to avoid a circular locking warning. I could not reproduce this warning. Furthermore, due to the asynchronous hangup the function call now gets queued up while the underlying tty is being freed. Depending on the timing this results in a NULL pointer access in the global work queue scheduler. To be precise in process_one_work(). Therefore, the previous commit made the issue worse which it tried to fix. This patch fixes this by falling back to the old behavior which uses a blocking tty hangup call before freeing up the associated tty. Fixes: 7030082a7415 ("tty: n_gsm: avoid recursive locking with async port hangup") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21tty: n_gsm: fix proper link termination after failed open[email protected]1-1/+1
Trying to open a DLCI by sending a SABM frame may fail with a timeout. The link is closed on the initiator side without informing the responder about this event. The responder assumes the link is open after sending a UA frame to answer the SABM frame. The link gets stuck in a half open state. This patch fixes this by initiating the proper link termination procedure after link setup timeout instead of silently closing it down. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21tty: n_gsm: fix encoding of command/response bit[email protected]1-6/+10
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.2.1.2 describes the encoding of the C/R (command/response) bit. Table 1 shows that the actual encoding of the C/R bit is inverted if the associated frame is sent by the responder. The referenced commit fixed here further broke the internal meaning of this bit in the outgoing path by always setting the C/R bit regardless of the frame type. This patch fixes both by setting the C/R bit always consistently for command (1) and response (0) frames and inverting it later for the responder where necessary. The meaning of this bit in the debug output is being preserved and shows the bit as if it was encoded by the initiator. This reflects only the frame type rather than the encoded combination of communication side and frame type. Fixes: cc0f42122a7e ("tty: n_gsm: Modify CR,PF bit when config requester") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21tty: n_gsm: fix encoding of control signal octet bit DV[email protected]1-1/+1
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the control signal octet used by the MSC (modem status command). The same encoding is also used in convergence layer type 2 as described in chapter 5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for outgoing control signal octets sent by the DTE (data terminal equipment), i.e. for the initiator side. Currently, the DV bit is only set if CD (carrier detect) is on, regardless of the side. This patch fixes this behavior by setting the DV bit on the initiator side unconditionally. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: [email protected] Signed-off-by: Daniel Starke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21Merge tag 'platform-drivers-x86-v5.17-3' of ↵Linus Torvalds3-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Two small fixes and one hardware-id addition" * tag 'platform-drivers-x86-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: int3472: Add terminator to gpiod_lookup_table platform/x86: asus-wmi: Fix regression when probing for fan curve control platform/x86: thinkpad_acpi: Add dual-fan quirk for T15g (2nd gen)
2022-02-21mtd: core: Fix a conflict between MTD and NVMEM on wp-gpios propertyChristophe Kerello1-0/+2
Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. A new Boolean flag named ignore_wp has been added in nvmem_config. In case ignore_wp is set, it means that the GPIO is handled by the provider. Lets set this flag in MTD layer to avoid the conflict on wp_gpios property. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: [email protected] Acked-by: Miquel Raynal <[email protected]> Signed-off-by: Christophe Kerello <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21nvmem: core: Fix a conflict between MTD and NVMEM on wp-gpios propertyChristophe Kerello1-1/+1
Wp-gpios property can be used on NVMEM nodes and the same property can be also used on MTD NAND nodes. In case of the wp-gpios property is defined at NAND level node, the GPIO management is done at NAND driver level. Write protect is disabled when the driver is probed or resumed and is enabled when the driver is released or suspended. When no partitions are defined in the NAND DT node, then the NAND DT node will be passed to NVMEM framework. If wp-gpios property is defined in this node, the GPIO resource is taken twice and the NAND controller driver fails to probe. It would be possible to set config->wp_gpio at MTD level before calling nvmem_register function but NVMEM framework will toggle this GPIO on each write when this GPIO should only be controlled at NAND level driver to ensure that the Write Protect has not been enabled. A way to fix this conflict is to add a new boolean flag in nvmem_config named ignore_wp. In case ignore_wp is set, the GPIO resource will be managed by the provider. Fixes: 2a127da461a9 ("nvmem: add support for the write-protect pin") Cc: [email protected] Signed-off-by: Christophe Kerello <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-21Merge tag 'iio-fixes-for-5.17a' of ↵Greg Kroah-Hartman18-29/+72
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: 1st set of IIO fixes for the 5.17 cycle. Several drivers: - Fix a failure to disable runtime in probe error paths. All cases were introduced in the same rework patch. adi,ad7124 - Fix incorrect register masking. adi,ad74413r - Avoid referencing negative array offsets. - Use ngpio size when iterating over mask not numebr of channels. - Fix issue with wrong mask uage getting GPIOs. adi,admv1014 - Drop check on unsigned less than 0. adi,ads16480 - Correctly handle devices that don't have burst mode support. fsl,fxls8962af - Add missing padding needed between address and data for SPI transfers. men_z188 - Fix iomap leak in error path. st,lsm6dsx - Wait for setting time in oneshot reads to get a stable result. ti,tsc2046 - Prevent an array overflow. * tag 'iio-fixes-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot iio: Fix error handling for PM iio: addac: ad74413r: correct comparator gpio getters mask usage iio: addac: ad74413r: use ngpio size when iterating over mask iio: addac: ad74413r: Do not reference negative array offsets iio: adc: men_z188_adc: Fix a resource leak in an error handling path iio: frequency: admv1013: remove the always true condition iio: accel: fxls8962af: add padding to regmap for SPI iio:imu:adis16480: fix buffering for devices with no burst mode iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits iio: adc: tsc2046: fix memory corruption by preventing array overflow
2022-02-21drm/i915/adlp: Add TypeC PHY TBT->DP-alt/legacy mode switch workaroundImre Deak2-1/+24
Add display workaround # 1309179469 , which fixes a PHY hang when switching from TBT mode to DP-alt/legacy mode. The workaround also requires an IFWI/PHY firmware change, before that this change has no effect (the DKL_PCS_DW5/SOFTRESET flag is always cleared). HSDES: 18018237866 HSDES: 16014473319 Signed-off-by: Imre Deak <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21platform/x86: int3472: Add terminator to gpiod_lookup_tableDaniel Scally1-1/+2
Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops. Fixes: 19d8d6e36b4b ("platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell") Signed-off-by: Daniel Scally <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2022-02-21net: mdio-ipq4019: add delay after clock enableBaruch Siach1-1/+5
Experimentation shows that PHY detect might fail when the code attempts MDIO bus read immediately after clock enable. Add delay to stabilize the clock before bus access. PHY detect failure started to show after commit 7590fc6f80ac ("net: mdio: Demote probed message to debug print") that removed coincidental delay between clock enable and bus access. 10ms is meant to match the time it take to send the probed message over UART at 115200 bps. This might be a far overshoot. Fixes: 23a890d493e3 ("net: mdio: Add the reset function for IPQ MDIO driver") Signed-off-by: Baruch Siach <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-21drm/i915/pxp: prefer forward declaration over includesJani Nikula1-1/+1
Always use forward declarations instead of includes in headers if possible. Signed-off-by: Jani Nikula <[email protected]> Reviewed-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21drm/i915/reg: split out icl_dsi_regs.hJani Nikula4-333/+344
The ICL DSI registers have fairly isolated usage. Split the register macros to a separate file. Cc: Matt Roper <[email protected]> Reviewed-by: Matt Roper <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21drm/i915/reg: split out vlv_dsi_regs.h and vlv_dsi_pll_regs.hJani Nikula8-575/+595
The VLV (including CHV, BXT, and GLK) DSI registers have fairly isolated usage. Split the register macros to separated files. Cc: Matt Roper <[email protected]> Reviewed-by: Matt Roper <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21drm/i915/dsi: add separate init timer mask definition for ICL DSIJani Nikula2-1/+2
Having a separate definition will be useful for splitting VLV and ICL register files. Cc: Matt Roper <[email protected]> Reviewed-by: Matt Roper <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21drm/i915/dsi: disassociate VBT video transfer mode from register valuesJani Nikula4-19/+39
The VBT DSI video transfer mode field values have been defined in terms of the VLV MIPI_VIDEO_MODE_FORMAT register. The ICL DSI code maps that to ICL DSI_TRANS_FUNC_CONF() register. The values are the same, though the shift is different. Make a clean break and disassociate the values from each other. Assume the values can be different, and translate the VBT value to VLV and ICL register values as needed. Use the existing macros from intel_bios.h. This will be useful in splitting the DSI register macros to files by DSI implementation. Cc: Matt Roper <[email protected]> Reviewed-by: Matt Roper <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21drm/i915/dg2: Print PHY name properly on calibration errorMatt Roper1-1/+1
We need to use phy_name() to convert the PHY value into a human-readable character in the error message. Fixes: a6a128116e55 ("drm/i915/dg2: Wait for SNPS PHY calibration during display init") Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Swathi Dhanavanthri <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 84073e568eec7b586b2f6fd5fb2fb08f59edec54) Signed-off-by: Tvrtko Ursulin <[email protected]>
2022-02-21drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGVVille Syrjälä1-2/+16
If the only thing that is changing is SAGV vs. no SAGV but the number of active planes and the total data rates end up unchanged we currently bail out of intel_bw_atomic_check() early and forget to actually compute the new WGV point mask and thus won't actually enable/disable SAGV as requested. This ends up poorly if we end up running with SAGV enabled when we shouldn't. Usually ends up in underruns. To fix this let's go through the QGV point mask computation if either the data rates/number of planes, or the state of SAGV is changing. v2: Check more carefully if things are changing to avoid the extra calculations/debugs from introducing unwanted overhead Cc: [email protected] Reviewed-by: Stanislav Lisovskiy <[email protected]> #v1 Fixes: 20f505f22531 ("drm/i915: Restrict qgv points which don't have enough bandwidth.") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 6b728595ffa51c087343c716bccbfc260f120e72) Signed-off-by: Tvrtko Ursulin <[email protected]>
2022-02-21drm/i915: Correctly populate use_sagv_wm for all pipesVille Syrjälä1-11/+11
When changing between SAGV vs. no SAGV on tgl+ we have to update the use_sagv_wm flag for all the crtcs or else an active pipe not already in the state will end up using the wrong watermarks. That is especially bad when we end up with the tighter non-SAGV watermarks with SAGV enabled. Usually ends up in underruns. Cc: [email protected] Reviewed-by: Stanislav Lisovskiy <[email protected]> Fixes: 7241c57d3140 ("drm/i915: Add TGL+ SAGV support") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 8dd8ffb824ca7b897ce9f2082ffa7e64831c22dc) Signed-off-by: Tvrtko Ursulin <[email protected]>
2022-02-21drm/i915: Disconnect PHYs left connected by BIOS on disabled portsImre Deak1-6/+20
BIOS may leave a TypeC PHY in a connected state even though the corresponding port is disabled. This will prevent any hotplug events from being signalled (after the monitor deasserts and then reasserts its HPD) until the PHY is disconnected and so the driver will not detect a connected sink. Rebooting with the PHY in the connected state also results in a system hang. Fix the above by disconnecting TypeC PHYs on disabled ports. Before commit 64851a32c463e5 the PHY connected state was read out even for disabled ports and later the PHY got disconnected as a side effect of a tc_port_lock/unlock() sequence (during connector probing), hence recovering the port's hotplug functionality. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014 Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state") Cc: <[email protected]> # v5.16+ Cc: José Roberto de Souza <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit ed0ccf349ffd9c80e7376d4d8c608643de990e86) Signed-off-by: Tvrtko Ursulin <[email protected]>
2022-02-21drm/i915: Widen the QGV point maskVille Syrjälä1-4/+4
adlp+ adds some extra bits to the QGV point mask. The code attempts to handle that but forgot to actually make sure we can store those bits in the bw state. Fix it. Cc: [email protected] Cc: Stanislav Lisovskiy <[email protected]> Fixes: 192fbfb76744 ("drm/i915: Implement PSF GV point support") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Stanislav Lisovskiy <[email protected]> (cherry picked from commit c0299cc9840b3805205173cc77782f317b78ea0e) Signed-off-by: Tvrtko Ursulin <[email protected]>
2022-02-21USB: serial: option: add Telit LE910R1 compositionsDaniele Palmas1-0/+6
Add support for the following Telit LE910R1 compositions: 0x701a: rndis, tty, tty, tty 0x701b: ecm, tty, tty, tty 0x9201: tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-02-21USB: serial: option: add support for DW5829eSlark Xiao1-0/+6
Dell DW5829e same as DW5821e except CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. There are 2 types product of DW5829e: normal and eSIM. So we will add 2 PID for DW5829e. And for each PID, it support MBIM or RMNET. Let's see test evidence as below: DW5829e MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option DW5829e-eSIM MBIM mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 2 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) DW5829e-eSIM RMNET mode: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option BTW, the interface 0x6 of MBIM mode is GNSS port, which not same as NMEA port. So it's banned from serial option driver. The remaining interfaces 0x2-0x5 are: MODEM, MODEM, NMEA, DIAG. Signed-off-by: Slark Xiao <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: drop unnecessary reservation of interface 1 ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-02-21Revert "USB: serial: ch341: add new Product ID for CH341A"Dmytro Bagrii1-1/+0
This reverts commit 46ee4abb10a07bd8f8ce910ee6b4ae6a947d7f63. CH341 has Product ID 0x5512 in EPP/MEM mode which is used for I2C/SPI/GPIO interfaces. In asynchronous serial interface mode CH341 has PID 0x5523 which is already in the table. Mode is selected by corresponding jumper setting. Signed-off-by: Dmytro Bagrii <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/YJ0OCS/sh+1ifD/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-02-21drm/vc4: Use drm_mode_copy()Ville Syrjälä1-3/+2
struct drm_display_mode embeds a list head, so overwriting the full struct with another one will corrupt the list (if the destination mode is on a list). Use drm_mode_copy() instead which explicitly preserves the list head of the destination mode. Even if we know the destination mode is not on any list using drm_mode_copy() seems decent as it sets a good example. Bad examples of not using it might eventually get copied into code where preserving the list head actually matters. Obviously one case not covered here is when the mode itself is embedded in a larger structure and the whole structure is copied. But if we are careful when copying into modes embedded in structures I think we can be a little more reassured that bogus list heads haven't been propagated in. @is_mode_copy@ @@ drm_mode_copy(...) { ... } @depends on !is_mode_copy@ struct drm_display_mode *mode; expression E, S; @@ ( - *mode = E + drm_mode_copy(mode, &E) | - memcpy(mode, E, S) + drm_mode_copy(mode, E) ) @depends on !is_mode_copy@ struct drm_display_mode mode; expression E; @@ ( - mode = E + drm_mode_copy(&mode, &E) | - memcpy(&mode, E, S) + drm_mode_copy(&mode, E) ) @@ struct drm_display_mode *mode; @@ - &*mode + mode Cc: Emma Anholt <[email protected]> Cc: Maxime Ripard <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21PCI: vmd: Prevent recursive locking on interrupt allocationThomas Gleixner1-7/+7
Tejas reported the following recursive locking issue: swapper/0/1 is trying to acquire lock: ffff8881074fd0a0 (&md->mutex){+.+.}-{3:3}, at: msi_get_virq+0x30/0xc0 but task is already holding lock: ffff8881017cd6a0 (&md->mutex){+.+.}-{3:3}, at: __pci_enable_msi_range+0xf2/0x290 stack backtrace: __mutex_lock+0x9d/0x920 msi_get_virq+0x30/0xc0 pci_irq_vector+0x26/0x30 vmd_msi_init+0xcc/0x210 msi_domain_alloc+0xbf/0x150 msi_domain_alloc_irqs_descs_locked+0x3e/0xb0 __pci_enable_msi_range+0x155/0x290 pci_alloc_irq_vectors_affinity+0xba/0x100 pcie_port_device_register+0x307/0x550 pcie_portdrv_probe+0x3c/0xd0 pci_device_probe+0x95/0x110 This is caused by the VMD MSI code which does a lookup of the Linux interrupt number for an VMD managed MSI[X] vector. The lookup function tries to acquire the already held mutex. Avoid that by caching the Linux interrupt number at initialization time instead of looking it up over and over. Fixes: 82ff8e6b78fc ("PCI/MSI: Use msi_get_virq() in pci_get_vector()") Reported-by: "Surendrakumar Upadhyay, TejaskumarX" <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: "Surendrakumar Upadhyay, TejaskumarX" <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/87a6euub2a.ffs@tglx
2022-02-21drm/panel: nt35560: Support also ACX424AKMLinus Walleij1-3/+69
Add some code and config to also support the ACX424AKM used in some Sony (Ericsson) Mobile phones. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21drm/panel: nt35560: Support more panel IDsLinus Walleij1-3/+5
These IDs were found in the wild in a Sony Xperia vendor tree. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-21drm/panel: Rename Sony ACX424 to Novatek NT35560Linus Walleij3-118/+122
A code drop from Sony Mobile reveals that the ACX424 panels are built around the Novatek NT35560 panel controllers so just bite the bullet and rename the driver and all basic symbols so that we can modify this driver to cover any other panels also using the Novatek NT35560 display controller. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-20Merge tag 'edac_urgent_for_v5.17_rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "Fix a long-standing struct alignment bug in the EDAC struct allocation code" * tag 'edac_urgent_for_v5.17_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Fix calculation of returned address and next offset in edac_align_ptr()
2022-02-20Merge tag 'scsi-fixes' of ↵Linus Torvalds6-8/+29
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes, all in drivers. The ufs and qedi fixes are minor; the lpfc one is a bit bigger because it involves adding a heuristic to detect and deal with common but not standards compliant behaviour" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Fix divide by zero in ufshcd_map_queues() scsi: lpfc: Fix pt2pt NVMe PRLI reject LOGO loop scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp()
2022-02-20Merge tag 'dmaengine-fix-5.17' of ↵Linus Torvalds5-13/+25
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes for: - ptdma error handling in init - lock fix in at_hdmac - error path and error num fix for sh dma - pm balance fix for stm32" * tag 'dmaengine-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: shdma: Fix runtime PM imbalance on error dmaengine: sh: rcar-dmac: Check for error num after dma_set_max_seg_size dmaengine: stm32-dmamux: Fix PM disable depth imbalance in stm32_dmamux_probe dmaengine: sh: rcar-dmac: Check for error num after setting mask dmaengine: at_xdmac: Fix missing unlock in at_xdmac_tasklet() dmaengine: ptdma: Fix the error handling path in pt_core_init()
2022-02-20Merge branch 'i2c/for-current' of ↵Linus Torvalds4-9/+26
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some driver updates, a MAINTAINERS fix, and additions to COMPILE_TEST (so we won't miss build problems again)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: remove duplicate entry for i2c-qcom-geni i2c: brcmstb: fix support for DSL and CM variants i2c: qup: allow COMPILE_TEST i2c: imx: allow COMPILE_TEST i2c: cadence: allow COMPILE_TEST i2c: qcom-cci: don't put a device tree node before i2c_add_adapter() i2c: qcom-cci: don't delete an unregistered adapter i2c: bcm2835: Avoid clock stretching timeouts
2022-02-20Merge branch 'for-linus' of ↵Linus Torvalds3-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for Synaptics touchpads in RMI4 mode failing to suspend/resume properly because I2C client devices are now being suspended and resumed asynchronously which changed the ordering - a change to make sure we do not set right and middle buttons capabilities on touchpads that are "buttonpads" (i.e. do not have separate physical buttons) - a change to zinitix touchscreen driver adding more compatible strings/IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - set up dependency between PS/2 and SMBus companions Input: zinitix - add new compatible strings Input: clear BTN_RIGHT/MIDDLE on buttonpads
2022-02-20Merge tag 'for-v5.17-rc' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel: "Three regression fixes for the 5.17 cycle: - build warning fix for power-supply documentation - pointer size fix in cw2015 battery driver - OOM handling in bq256xx charger driver" * tag 'for-v5.17-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: bq256xx: Handle OOM correctly power: supply: core: fix application of sizeof to pointer power: supply: fix table problem in sysfs-class-power
Powered by cgit, Gruvboxed by Blaster4385.