aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-03-09platform/x86: dell-smbios: Correct some style warningsMario Limonciello1-3/+5
WARNING: function definition argument 'struct calling_interface_buffer *' should also have an identifier name + int (*call_fn)(struct calling_interface_buffer *); WARNING: Block comments use * on subsequent lines + /* 4 bytes of table header, plus 7 bytes of Dell header, plus at least + 6 bytes of entry */ WARNING: Block comments use a trailing */ on a separate line + 6 bytes of entry */ Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Darren Hart (VMware) <[email protected]>
2018-03-09Merge tag 'powerpc-4.16-5' of ↵Linus Torvalds1-0/+27
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix to properly advertise our support for a new firmware feature, caused by two series conflicting semantically but not textually. There's a new ioctl for the new ocxl driver, which is not a fix, but needed to complete the userspace API and good to have before the driver is in a released kernel. Finally three minor selftest fixes, and a fix for intermittent build failures for some obscure platforms, caused by a missing make dependency. Thanks to: Alastair D'Silva, Bharata B Rao, Guenter Roeck" * tag 'powerpc-4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Fix vector5 in ibm architecture vector table ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL ocxl: Add get_metadata IOCTL to share OCXL information to userspace selftests/powerpc: Skip the subpage_prot tests if the syscall is unavailable selftests/powerpc: Fix missing clean of pmu/lib.o powerpc/boot: Fix random libfdt related build errors selftests/powerpc: Skip tm-trap if transactional memory is not enabled
2018-03-09xhci: Fix front USB ports on ASUS PRIME B350M-AKai-Heng Feng3-0/+7
When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the xHC stops working: [ 549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout [ 549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110 [ 549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110) Delay before running xHC command CMD_RUN can workaround the issue. Use a new quirk to make the delay only targets to the affected xHC. Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-09usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing"Yoshihiro Shimoda1-10/+1
This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing") because this driver also has runtime PM and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module clocks during resume") will restore the clock on R-Car H3 environment. If the xhci_plat_suspend() disables the clk, the system cannot enable the clk in resume like the following behavior: < In resume > - genpd_resume_noirq() runs and enable the clk (enable_count = 1) - cpg_mssr_resume_noirq() restores the clk register. -- Since the clk was disabled in suspend, cpg_mssr_resume_noirq() will disable the clk and keep the enable_count. - Even if xhci_plat_resume() calls clk_prepare_enable(), since the enable_count is 1, the clk will be not enabled. After this patch is applied, the cpg-mssr driver will save the clk as enable, so the clk will be enabled in resume. Fixes: 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing") Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-09vhost_net: examine pointer types during un-producingJason Wang2-2/+3
After commit fc72d1d54dd9 ("tuntap: XDP transmission"), we can actually queueing XDP pointers in the pointer ring, so we should examine the pointer type before freeing the pointer. Fixes: fc72d1d54dd9 ("tuntap: XDP transmission") Reported-by: Michael S. Tsirkin <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-09vhost_net: keep private_data and rx_ring syncedJason Wang1-2/+3
We get pointer ring from the exported sock, this means we should keep rx_ring and vq->private synced during both vq stop and backend set, otherwise we may see stale rx_ring. Fixes: c67df11f6e480 ("vhost_net: try batch dequing from skb array") Signed-off-by: Michael S. Tsirkin <[email protected]> Signed-off-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-09vhost_net: initialize rx_ring in vhost_net_open()Alexander Potapenko1-0/+1
KMSAN reported a use of uninit memory in vhost_net_buf_unproduce() while trying to access n->vqs[VHOST_NET_VQ_TX].rx_ring: ================================================================== BUG: KMSAN: use of uninitialized memory in vhost_net_buf_unproduce+0x7bb/0x9a0 drivers/vho et.c:170 CPU: 0 PID: 3021 Comm: syz-fuzzer Not tainted 4.16.0-rc4+ #3853 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x1f0 mm/kmsan/kmsan.c:1093 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 vhost_net_buf_unproduce+0x7bb/0x9a0 drivers/vhost/net.c:170 vhost_net_stop_vq drivers/vhost/net.c:974 [inline] vhost_net_stop+0x146/0x380 drivers/vhost/net.c:982 vhost_net_release+0xb1/0x4f0 drivers/vhost/net.c:1015 __fput+0x49f/0xa00 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:191 [inline] exit_to_usermode_loop arch/x86/entry/common.c:166 [inline] prepare_exit_to_usermode+0x349/0x3b0 arch/x86/entry/common.c:196 syscall_return_slowpath+0xf3/0x6d0 arch/x86/entry/common.c:265 do_syscall_64+0x34d/0x450 arch/x86/entry/common.c:292 ... origin: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:303 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:213 kmsan_kmalloc_large+0x6f/0xd0 mm/kmsan/kmsan.c:392 kmalloc_large_node_hook mm/slub.c:1366 [inline] kmalloc_large_node mm/slub.c:3808 [inline] __kmalloc_node+0x100e/0x1290 mm/slub.c:3818 kmalloc_node include/linux/slab.h:554 [inline] kvmalloc_node+0x1a5/0x2e0 mm/util.c:419 kvmalloc include/linux/mm.h:541 [inline] vhost_net_open+0x64/0x5f0 drivers/vhost/net.c:921 misc_open+0x7b5/0x8b0 drivers/char/misc.c:154 chrdev_open+0xc28/0xd90 fs/char_dev.c:417 do_dentry_open+0xccb/0x1430 fs/open.c:752 vfs_open+0x272/0x2e0 fs/open.c:866 do_last fs/namei.c:3378 [inline] path_openat+0x49ad/0x6580 fs/namei.c:3519 do_filp_open+0x267/0x640 fs/namei.c:3553 do_sys_open+0x6ad/0x9c0 fs/open.c:1059 SYSC_openat+0xc7/0xe0 fs/open.c:1086 SyS_openat+0x63/0x90 fs/open.c:1080 do_syscall_64+0x2f1/0x450 arch/x86/entry/common.c:287 ================================================================== Fixes: c67df11f6e480 ("vhost_net: try batch dequing from skb array") Signed-off-by: Alexander Potapenko <[email protected]> Signed-off-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-09net: ethernet: ave: enable Rx drop interruptKunihiko Hayashi1-1/+1
This enables AVE_GI_RXDROP interrupt factor. This factor indicates depletion of Rx descriptors and the handler counts the number of dropped packets. Signed-off-by: Kunihiko Hayashi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-09usb: usbmon: Read text within supplied buffer sizePete Zaitcev1-48/+78
This change fixes buffer overflows and silent data corruption with the usbmon device driver text file read operations. Signed-off-by: Fredrik Noring <[email protected]> Signed-off-by: Pete Zaitcev <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-09loop: Fix lost writes caused by missing flagRoss Zwisler1-1/+1
The following commit: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") replaced __do_lo_send_write(), which used ITER_KVEC iterators, with lo_write_bvec() which uses ITER_BVEC iterators. In this change, though, the WRITE flag was lost: - iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len); + iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len); This flag is necessary for the DAX case because we make decisions based on whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and in dax_iomap_rw(). We end up going through this path in configurations where we combine a PMEM device with 4k sectors, a loopback device and DAX. The consequence of this missed flag is that what we intend as a write actually turns into a read in the DAX code, so no data is ever written. The very simplest test case is to create a loopback device and try and write a small string to it, then hexdump a few bytes of the device to see if the write took. Without this patch you read back all zeros, with this you read back the string you wrote. For XFS this causes us to fail or panic during the following xfstests: xfs/074 xfs/078 xfs/216 xfs/217 xfs/250 For ext4 we have a similar issue where writes never happen, but we don't currently have any xfstests that use loopback and show this issue. Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This causes the xfstests to all pass. Cc: Al Viro <[email protected]> Cc: [email protected] Fixes: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Ming Lei <[email protected]> Signed-off-by: Ross Zwisler <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-03-09drm/i915/gvt: keep oa config in shadow ctxMin He2-0/+54
When populating shadow ctx from guest, we should handle oa related registers in hw ctx, so that they will not be overlapped by guest oa configs. This patch made it possible to capture oa data from host for both host and guests. Signed-off-by: Min He <[email protected]> Signed-off-by: Zhi Wang <[email protected]>
2018-03-09drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmioXiong Zhang1-0/+2
If user continuously create vgpu, boot guest, shoutdown guest and destroy vgpu from remote, the following calltrace exists in dmesg sometimes: [ 6412.954721] RPM wakelock ref not held during HW access [ 6412.954795] WARNING: CPU: 7 PID: 11941 at linux/drivers/gpu/drm/i915/intel_drv.h:1800 intel_uncore_forcewake_get.part.7+0x96/0xa0 [i915] [ 6412.954915] Call Trace: [ 6412.954951] intel_uncore_forcewake_get+0x18/0x20 [i915] [ 6412.954989] intel_gvt_switch_mmio+0x8e/0x770 [i915] [ 6412.954996] ? __slab_free+0x14d/0x2c0 [ 6412.955001] ? __slab_free+0x14d/0x2c0 [ 6412.955006] ? __slab_free+0x14d/0x2c0 [ 6412.955041] intel_vgpu_stop_schedule+0x92/0xd0 [i915] [ 6412.955073] intel_gvt_deactivate_vgpu+0x48/0x60 [i915] [ 6412.955078] __intel_vgpu_release+0x55/0x260 [kvmgt] when this happens, gvt_switch_mmio is called at vgpu destroy, host i915 is idle and doesn't hold RPM wakelock, igd is in powersave mode, but gvt_switch_mmio require igd power on to access register, so intel_runtime_pm_get should be added to make sure igd power on before gvt_switch_mmio. v2: Move runtime_pm_get/put into gvt_switch_mmio.(Zhenyu) Signed-off-by: Xiong Zhang <[email protected]> Signed-off-by: Zhi Wang <[email protected]>
2018-03-09clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependencyMasahiro Yamada1-0/+1
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM. Compile testing on architecture without HAS_IOMEM causes "unmet direct dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig". Add the proper dependency to the ATMEL_ST config. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: Arnd Bergmann <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-03-08Merge branch 'nvme-4.16-rc5' of git://git.infradead.org/nvme into for-linusJens Axboe6-57/+30
Pull NVMe fixes for this series from Keith: "A few late fixes for 4.16: * Reverting sysfs slave device links for native nvme multipathing. The hidden disk attributes broke common user tools. * A fix for a PPC pci error handling regression. * Update pci interrupt count to consider the actual IRQ spread, fixing potentially poor initial queue affinity. * Off-by-one errors in nvme-fc queue sizes * A fabrics discovery fix to be more tolerant with user tools." * 'nvme-4.16-rc5' of git://git.infradead.org/nvme: nvme_fc: rework sqsize handling nvme-fabrics: Ignore nr_io_queues option for discovery controllers Revert "nvme: create 'slaves' and 'holders' entries for hidden controllers" nvme: pci: pass max vectors as num_possible_cpus() to pci_alloc_irq_vectors nvme-pci: Fix EEH failure on ppc
2018-03-09Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie33-294/+381
into drm-fixes Fixes for 4.16. A bit bigger than I would have liked, but most of that is DC fixes which Harry helped me pull together from the past few weeks. Highlights: - Fix DL DVI with DC - Various RV fixes for DC - Overlay fixes for DC - Fix HDMI2 handling on boards without HBR tables in the vbios - Fix crash with pass-through on SI on amdgpu - Fix RB harvesting on KV - Fix hibernation failures on UVD with certain cards * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amd/display: validate plane format on primary plane drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amd/display: early return if not in vga mode in disable_vga drm/amd/display: Fix takover from VGA mode drm/amd/display: Fix memleaks when atomic check fails. drm/amd/display: Return success when enabling interrupt drm/amd/display: Use crtc enable/disable_vblank hooks drm/amd/display: update infoframe after dig fe is turned on drm/amd/display: fix boot-up on vega10 drm/amd/display: fix cursor related Pstate hang drm/amd/display: Set irq state only on existing crtcs drm/amd/display: Fixed non-native modes not lighting up drm/amd/display: Call update_stream_signal directly from amdgpu_dm drm/amd/display: Make create_stream_for_sink more consistent drm/amd/display: Don't block dual-link DVI modes drm/amd/display: Don't allow dual-link DVI on all ASICs. drm/amd/display: Pass signal directly to enable_tmds_output drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink drm/amd/display: Move MAX_TMDS_CLOCK define to header ...
2018-03-09Merge tag 'drm-misc-fixes-2018-03-07' of ↵Dave Airlie5-44/+60
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes sun4i fixes on clk, division by zero and LVDS. * tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc: drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off drm/sun4i: rgb: Fix potential division by zero drm/sun4i: tcon: Reduce the scope of the LVDS error a bit drm/sun4i: Release exclusive clock lock when disabling TCON drm/sun4i: Fix dclk_set_phase
2018-03-08usb: host: xhci-rcar: add support for r8a77965Yoshihiro Shimoda1-0/+4
This patch adds support for r8a77965 (R-Car M3-N). Signed-off-by: Yoshihiro Shimoda <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Rob Herring <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-08USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.hTeijo Kinnunen1-0/+7
This USB-SATA controller seems to be similar with JMicron bridge 152d:2566 already on the list. Adding it here fixes "Invalid field in cdb" errors. Signed-off-by: Teijo Kinnunen <[email protected]> Cc: [email protected] Acked-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-08Merge tag 'chrome-platform-4.16-rc4-fixes' of ↵Linus Torvalds1-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform fix from Benson Leung: "Revert a problematic patch that constified something imporperly" * tag 'chrome-platform-4.16-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const"
2018-03-08hv_netvsc: fix locking during VF setupStephen Hemminger1-0/+4
The dev_uc/mc_sync calls need to have the device address list locked. This was spotted by running with lockdep enabled. Fixes: bee9d41b37ea ("hv_netvsc: propagate rx filters to VF") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-08hv_netvsc: fix locking for rx_modeStephen Hemminger1-3/+8
The rx_mode operation handler is different than other callbacks in that is not always called with rtnl held. Therefore use RCU to ensure that references are valid. Fixes: bee9d41b37ea ("hv_netvsc: propagate rx filters to VF") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-08hv_netvsc: avoid repeated updates of packet filterStephen Hemminger2-2/+7
The netvsc driver can get repeated calls to netvsc_rx_mode during network setup; each of these calls ends up scheduling the lower layers to update tha packet filter. This update requires an request/response to the host. So avoid doing this if we already know that the correct packet filter value is set. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-08hv_netvsc: fix filter flagsStephen Hemminger1-2/+2
The recent change to not always enable all multicast and broadcast was broken; meant to set filter, not change flags. Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast") Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-08nvme_fc: rework sqsize handlingJames Smart1-10/+17
Corrected four outstanding issues in the transport around sqsize. 1: Create Connection LS is sending the 1's-based sqsize, should be sending the 0's-based value. 2: allocation of hw queue is using the 0's-base size. It should be using the 1's-based value. 3: normalization of ctrl.sqsize by MQES is using MQES+1 (1's-based value). It should be MQES (0's-based value). 4: Missing clause to ensure queue_count not larger than ctrl->sqsize. Corrected by: Clean up routines that pass queue size around. The queue size value is the actual count (1's-based) value and determined from ctrl->sqsize + 1. Routines that send 0's-based value adapt from queue size. Sset ctrl->sqsize properly for MQES. Added clause to nsure queue_count not larger than ctrl->sqsize + 1. Signed-off-by: James Smart <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2018-03-08usb: xhci: dbc: Fix lockdep warningLu Baolu2-16/+24
The xHCI DbC implementation might enter a deadlock situation because there is no sufficient protection against the shared data between process and softirq contexts. This can lead to the following lockdep warnings. This patch changes to use spin_{,un}lock_irq{save,restore} to avoid potential deadlock. [ 528.248084] ================================ [ 528.252914] WARNING: inconsistent lock state [ 528.257756] 4.15.0-rc1+ #1630 Not tainted [ 528.262305] -------------------------------- [ 528.267145] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 528.273953] ksoftirqd/1/17 [HC0[0]:SC1[1]:HE0:SE0] takes: [ 528.280075] (&(&port->port_lock)->rlock){+.?.}, at: [<ffffffff815396a8>] dbc_rx_push+0x38/0x1c0 [ 528.290043] {SOFTIRQ-ON-W} state was registered at: [ 528.295570] _raw_spin_lock+0x2f/0x40 [ 528.299818] dbc_write_complete+0x27/0xa0 [ 528.304458] xhci_dbc_giveback+0xd1/0x200 [ 528.309098] xhci_dbc_flush_endpoint_requests+0x50/0x70 [ 528.315116] xhci_dbc_handle_events+0x696/0x7b0 [ 528.320349] process_one_work+0x1ee/0x6e0 [ 528.324988] worker_thread+0x4a/0x430 [ 528.329236] kthread+0x13e/0x170 [ 528.332992] ret_from_fork+0x24/0x30 [ 528.337141] irq event stamp: 2861 [ 528.340897] hardirqs last enabled at (2860): [<ffffffff810674ea>] tasklet_action+0x6a/0x250 [ 528.350460] hardirqs last disabled at (2861): [<ffffffff817dc1ef>] _raw_spin_lock_irq+0xf/0x40 [ 528.360219] softirqs last enabled at (2852): [<ffffffff817e0e8c>] __do_softirq+0x3dc/0x4f9 [ 528.369683] softirqs last disabled at (2857): [<ffffffff8106805b>] run_ksoftirqd+0x1b/0x60 [ 528.379048] [ 528.379048] other info that might help us debug this: [ 528.386443] Possible unsafe locking scenario: [ 528.386443] [ 528.393150] CPU0 [ 528.395917] ---- [ 528.398687] lock(&(&port->port_lock)->rlock); [ 528.403821] <Interrupt> [ 528.406786] lock(&(&port->port_lock)->rlock); [ 528.412116] [ 528.412116] *** DEADLOCK *** [ 528.412116] [ 528.418825] no locks held by ksoftirqd/1/17. [ 528.423662] [ 528.423662] stack backtrace: [ 528.428598] CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.15.0-rc1+ #1630 [ 528.436387] Call Trace: [ 528.439158] dump_stack+0x5e/0x8e [ 528.442914] print_usage_bug+0x1fc/0x220 [ 528.447357] mark_lock+0x4db/0x5a0 [ 528.451210] __lock_acquire+0x726/0x1130 [ 528.455655] ? __lock_acquire+0x557/0x1130 [ 528.460296] lock_acquire+0xa2/0x200 [ 528.464347] ? dbc_rx_push+0x38/0x1c0 [ 528.468496] _raw_spin_lock_irq+0x35/0x40 [ 528.473038] ? dbc_rx_push+0x38/0x1c0 [ 528.477186] dbc_rx_push+0x38/0x1c0 [ 528.481139] tasklet_action+0x1d2/0x250 [ 528.485483] __do_softirq+0x1dc/0x4f9 [ 528.489630] run_ksoftirqd+0x1b/0x60 [ 528.493682] smpboot_thread_fn+0x179/0x270 [ 528.498324] kthread+0x13e/0x170 [ 528.501981] ? sort_range+0x20/0x20 [ 528.505933] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 528.511755] ret_from_fork+0x24/0x30 Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver") Signed-off-by: Lu Baolu <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-08xhci: fix endpoint context tracer outputMathias Nyman1-10/+12
Fix incorrent values showed for max Primary stream and Linear stream array (LSA) values in the endpoint context decoder. Fixes: 19a7d0d65c4a ("usb: host: xhci: add Slot and EP Context tracers") Cc: <[email protected]> # v4.12+ Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-08Merge tag 'wireless-drivers-for-davem-2018-03-08' of ↵David S. Miller25-88/+212
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo: ==================== wireless-drivers fixes for 4.16 Quote a few fixes as I have not been able to send a pull request earlier. Most of the fixes for iwlwifi but also few others, nothing really standing out though. iwlwifi * fix a bogus warning when freeing a TFD * fix severe throughput problem with 9000 series * fix for a bug that caused queue hangs in certain situations * fix for an issue with IBSS * fix an issue with rate-scaling in AP-mode * fix Channel Switch Announcement (CSA) issues with count 0 and 1 * some firmware debugging fixes * remov a wrong error message when removing keys * fix a firmware sysassert most usually triggered in IBSS * a couple of fixes on multicast queues * a fix with CCMP 256 rtlwifi * fix loss of signal for rtl8723be brcmfmac * add possibility to obtain firmware error * fix P2P_DEVICE ethernet address generation ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-08Merge branch 'stable/for-jens-4.15' of ↵Jens Axboe1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Pull a xen_blkfront fix from Konrad: "It has one simple fix for the multi-queue support not showing up after a block device was detached/re-attached." * 'stable/for-jens-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen-blkfront: move negotiate_mq to cover all cases of new VBDs
2018-03-08team: Fix double free in error pathArkadi Sharshevsky1-2/+2
The __send_and_alloc_skb() receives a skb ptr as a parameter but in case it fails the skb is not valid: - Send failed and released the skb internally. - Allocation failed. The current code tries to release the skb in case of failure which causes redundant freeing. Fixes: 9b00cf2d1024 ("team: implement multipart netlink messages for options transfers") Signed-off-by: Arkadi Sharshevsky <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-08nvme-fabrics: Ignore nr_io_queues option for discovery controllersRoland Dreier1-0/+5
This removes a dependency on the order options are passed when creating a fabrics controller. With the old code, if "nr_io_queues" appears before an "nqn" option specifying the discovery controller, then nr_io_queues is overridden with zero. If "nr_io_queues" appears after specifying the discovery controller, then the nr_io_queues option is used to set the number of queues, and the driver attempts to establish IO connections to the discovery controller (which doesn't work). It seems better to ignore (and warn about) the "nr_io_queues" option if userspace has already asked to connect to the discovery controller. Signed-off-by: Roland Dreier <[email protected]> Reviewed-by: James Smart <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2018-03-08Merge tag 'fixes-for-v4.16-rc4' of ↵Greg Kroah-Hartman3-5/+4
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.16-rc4 Just small fixes now. The two most important are a fix for a a lock up on USB ID pin change during system suspend/resume on dwc3 and a use-after-free fix in ffs_fs_kill_sb(). Apart from that, some DT compatible fixes.
2018-03-08xen: xenbus: use put_device() instead of kfree()Arvind Yadav1-1/+4
Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-03-08pinctrl: samsung: Validate alias coming from DTKrzysztof Kozlowski6-52/+154
Driver uses alias from Device Tree as an index of pin controller data array. In case of a wrong DTB or an out-of-tree DTB, the alias could be outside of this data array leading to out-of-bounds access. Depending on binary and memory layout, this could be handled properly (showing error like "samsung-pinctrl 3860000.pinctrl: driver data not available") or could lead to exceptions. Reported-by: Geert Uytterhoeven <[email protected]> Cc: <[email protected]> Fixes: 30574f0db1b1 ("pinctrl: add samsung pinctrl and gpiolib driver") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Tomasz Figa <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-03-08pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[]Niklas Söderlund1-1/+0
When adding GP-1-28 port pin support it was forgotten to remove the CLKOUT pin from the list of pins that are not associated with a GPIO port in pinmux_pins[]. This results in a warning when reading the pinctrl files in sysfs as the CLKOUT pin is still added as a none GPIO pin. Fix this by removing the duplicated entry which is no longer needed. ~ # cat /sys/kernel/debug/pinctrl/e6060000.pin-controller/pinconf-pins [ 89.432081] ------------[ cut here ]------------ [ 89.436904] Pin 496 is not in bias info list [ 89.441252] WARNING: CPU: 1 PID: 456 at drivers/pinctrl/sh-pfc/core.c:408 sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.451002] CPU: 1 PID: 456 Comm: cat Not tainted 4.16.0-rc1-arm64-renesas-00048-gdfafc344a4f24dde #12 [ 89.460394] Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT) [ 89.468910] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 89.473747] pc : sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.478495] lr : sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.483241] sp : ffff00000aff3ab0 [ 89.486587] x29: ffff00000aff3ab0 x28: ffff00000893c698 [ 89.491955] x27: ffff000008ad7d98 x26: 0000000000000000 [ 89.497323] x25: ffff8006fb3f5028 x24: ffff8006fb3f5018 [ 89.502690] x23: 0000000000000001 x22: 00000000000001f0 [ 89.508057] x21: ffff8006fb3f5018 x20: ffff000008bef000 [ 89.513423] x19: 0000000000000000 x18: ffffffffffffffff [ 89.518790] x17: 0000000000006c4a x16: ffff000008d67c98 [ 89.524157] x15: 0000000000000001 x14: ffff00000896ca98 [ 89.529524] x13: 00000000cce5f611 x12: ffff8006f8d3b5a8 [ 89.534891] x11: ffff00000981e000 x10: ffff000008befa08 [ 89.540258] x9 : ffff8006f9b987a0 x8 : ffff000008befa08 [ 89.545625] x7 : ffff000008137094 x6 : 0000000000000000 [ 89.550991] x5 : 0000000000000000 x4 : 0000000000000001 [ 89.556357] x3 : 0000000000000007 x2 : 0000000000000007 [ 89.561723] x1 : 1ff24f80f1818600 x0 : 0000000000000000 [ 89.567091] Call trace: [ 89.569561] sh_pfc_pin_to_bias_reg+0xb0/0xb8 [ 89.573960] r8a7795_pinmux_get_bias+0x30/0xc0 [ 89.578445] sh_pfc_pinconf_get+0x1e0/0x2d8 [ 89.582669] pin_config_get_for_pin+0x20/0x30 [ 89.587067] pinconf_generic_dump_one+0x180/0x1c8 [ 89.591815] pinconf_generic_dump_pins+0x84/0xd8 [ 89.596476] pinconf_pins_show+0xc8/0x130 [ 89.600528] seq_read+0xe4/0x510 [ 89.603789] full_proxy_read+0x60/0x90 [ 89.607576] __vfs_read+0x30/0x140 [ 89.611010] vfs_read+0x90/0x170 [ 89.614269] SyS_read+0x60/0xd8 [ 89.617443] __sys_trace_return+0x0/0x4 [ 89.621314] ---[ end trace 99c8d0d39c13e794 ]--- Fixes: 82d2de5a4f646f72 ("pinctrl: sh-pfc: r8a7795: Add GP-1-28 port pin support") Reviewed-and-tested-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Niklas Söderlund <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-03-08clk: ti: am43xx: add set-rate-parent support for display clkctrl clockTero Kristo1-1/+1
Display driver assumes it can use clk_set_rate for the display clock via set-rate-parent mechanism, so add the flag for this to id. Signed-off-by: Tero Kristo <[email protected]> Acked-by: Tony Lindgren <[email protected]>
2018-03-08clk: ti: am33xx: add set-rate-parent support for display clkctrl clockTero Kristo1-1/+1
Display driver assumes it can use clk_set_rate for the display clock via set-rate-parent mechanism, so add the flag for this to it. Signed-off-by: Tero Kristo <[email protected]> Reported-by: Jyri Sarha <[email protected]> Acked-by: Tony Lindgren <[email protected]> Tested-by: Jyri Sarha <[email protected]>
2018-03-08clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flagTero Kristo1-0/+2
Certain clkctrl clocks, notably the display ones, use the CLK_SET_RATE_PARENT feature extensively. Add support for this flag to the clkctrl clocks. Signed-off-by: Tero Kristo <[email protected]> Reported-by: Jyri Sarha <[email protected]> Acked-by: Tony Lindgren <[email protected]> Tested-by: Jyri Sarha <[email protected]>
2018-03-07Revert "platform/chrome: chromeos_laptop: make chromeos_laptop const"Dmitry Torokhov1-11/+11
This reverts commit a376cd91606365609d8fbd57247618bd51da1fc6 because chromeos_laptop instances should not be marked as "const" (at this time), since i2c_peripheral is being modified (we change "state" and "tries") when we instantiate devices. Signed-off-by: Dmitry Torokhov <[email protected]> Signed-off-by: Benson Leung <[email protected]>
2018-03-07Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-2/+0
Pull virtio bugfix from Michael Tsirkin: "A bugfix for error handling in virtio" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_ring: fix num_free handling in error case
2018-03-07Merge branch 'for-linus' of ↵Linus Torvalds3-11/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - we are reverting patch that was switched touchpad on Lenovo T460P over to native RMI because on these boxes BIOS messes up with SMBus controller state. We might re-enable it later once SMBus issue is resolved - disabling interrupts in matrix_keypad driver was racy - mms114 now has SPDX header and matching MODULE_LICENSE * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI" Input: matrix_keypad - fix race when disabling interrupts Input: mms114 - add SPDX identifier Input: mms114 - fix license module information
2018-03-07Revert "Input: synaptics - Lenovo Thinkpad T460p devices should use RMI"Arkadiusz Hiler1-1/+0
This reverts commit 48282969826b3d3c76e908182f69724d86d995fe which caused the following issues: 1. On T460p with BIOS version 2.22 touchpad and trackpoint stop working after suspend-resume cycle. Due to strange state of the device another suspend is impossible. The following dmesg errors can be observed: thinkpad_acpi: EC reports that Thermal Table has changed rmi4_smbus 7-002c: failed to get SMBus version number! rmi4_physical rmi4-00: rmi_driver_reset_handler: Failed to read current IRQ mask. rmi4_f01 rmi4-00.fn01: Failed to restore normal operation: -16. rmi4_f01 rmi4-00.fn01: Resume failed with code -16. rmi4_physical rmi4-00: Failed to suspend functions: -16 rmi4_smbus 7-002c: Failed to resume device: -16 PM: resume devices took 0.640 seconds rmi4_f03 rmi4-00.fn03: rmi_f03_pt_write: Failed to write to F03 TX register (-16). rmi4_physical rmi4-00: rmi_driver_clear_irq_bits: Failed to change enabled interrupts! rmi4_physical rmi4-00: rmi_driver_set_irq_bits: Failed to change enabled interrupts! psmouse: probe of serio3 failed with error -1 2. On another T460p with BIOS version 2.15 two finger scrolling gesture on the touchpad stops working after suspend-resume cycle (about 75% reproducibility, when it still works, the scrolling gesture becomes laggy). Nothing suspicious appears in the dmesg. Analysis form Richard Schütz: "RMI is unreliable on the ThinkPad T460p because the device is affected by the firmware behavior addressed in a7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR")." The affected devices often show: i801_smbus 0000:00:1f.4: BIOS is accessing SMBus registers i801_smbus 0000:00:1f.4: Driver SMBus register access inhibited Reported-by: Richard Schütz <[email protected]> Signed-off-by: Arkadiusz Hiler <[email protected]> Tested-by: Martin Peres <[email protected]> Tested-by: Arkadiusz Hiler <[email protected]> Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2018-03-07libnvdimm, {btt, blk}: do integrity setup before add_disk()Vishal Verma2-4/+2
Prior to 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") we needed to temporarily add a zero-capacity disk before registering for blk-integrity. But adding a zero-capacity disk caused the partition table scanning to bail early, and this resulted in partitions not coming up after a probe of the BTT or blk namespaces. We can now register for integrity before the disk has been added, and this fixes the rescan problems. Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") Reported-by: Dariusz Dokupil <[email protected]> Cc: <[email protected]> Signed-off-by: Vishal Verma <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2018-03-07drm/amd/display: validate plane format on primary planeShirish S1-0/+7
In dce110, the plane configuration is such that plane 0 or the primary plane should be rendered with only RGB data. This patch adds the validation to ensure that no video data is rendered on plane 0. Signed-off-by: Shirish S <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-07drm/amdgpu:Always save uvd vcpu_bo in VM ModeJames Zhu1-5/+8
When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021 Signed-off-by: James Zhu <[email protected]> Reviewed-by: Leo Liu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-03-07drm/amdgpu:Correct max uvd handlesJames Zhu1-1/+1
Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by: James Zhu <[email protected]> Reviewed-by: Leo Liu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-03-07drm/amd/display: early return if not in vga mode in disable_vgaEric Yang2-7/+13
The work around for hw bug causes S3 resume failure. Don't execute disable vga logic if not in vga mode. Signed-off-by: Eric Yang <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-07drm/amd/display: Fix takover from VGA modeBhawanpreet Lakha2-2/+18
HW Engineer's Notes: During switch from vga->extended, if we set the VGA_TEST_ENABLE and then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset VGA_TEST_ENABLE, to leave it in the same state as before. Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-07drm/amd/display: Fix memleaks when atomic check fails.Leo (Sunpeng) Li1-10/+21
While checking plane states for updates during atomic check, we create dc_plane_states in preparation. These dc states should be freed if something errors. Although the input transfer function is also freed by dc_plane_state_release(), we should free it (on error) under the same scope as where it is created. Signed-off-by: Leo (Sunpeng) Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-07drm/amd/display: Return success when enabling interruptHarry Wentland3-6/+5
Signed-off-by: Harry Wentland <[email protected]> Reviewed-by: Roman Li <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-07drm/amd/display: Use crtc enable/disable_vblank hooksHarry Wentland1-0/+24
Signed-off-by: Harry Wentland <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.