aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14RDMA/core: Do not use invalid destination in determining port reuseTatyana Nikolova1-5/+7
cma_port_is_unique() allows local port reuse if the quad (source address and port, destination address and port) for this connection is unique. However, if the destination info is zero or unspecified, it can't make a correct decision but still allows port reuse. For example, sometimes rdma_bind_addr() is called with unspecified destination and reusing the port can lead to creating a connection with a duplicate quad, after the destination is resolved. The issue manifests when MPI scale-up tests hang after the duplicate quad is used. Set the destination address family and add checks for zero destination address and port to prevent source port reuse based on invalid destination. Fixes: 19b752a19dce ("IB/cma: Allow port reuse for rdma_id") Reviewed-by: Sean Hefty <[email protected]> Signed-off-by: Tatyana Nikolova <[email protected]> Signed-off-by: Shiraz Saleem <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-14dm mpath: fix passing integrity dataSteffen Maier1-2/+3
After v4.12 commit e2460f2a4bc7 ("dm: mark targets that pass integrity data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support block integrity any more. So add it to the whitelist. This is also a pre-requisite to use block integrity with other dm layer(s) on top of multipath, such as kpartx partitions (dm-linear) or LVM. Also, bump target version to reflect this fix. Fixes: e2460f2a4bc7 ("dm: mark targets that pass integrity data") Cc: <[email protected]> #4.12+ Bisected-by: Fedor Loshakov <[email protected]> Signed-off-by: Steffen Maier <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2018-03-14RDMA/mlx5: Fix crash while accessing garbage pointer and freed memoryLeon Romanovsky1-4/+8
The failure in rereg_mr flow caused to set garbage value (error value) into mr->umem pointer. This pointer is accessed at the release stage and it causes to the following crash. There is not enough to simply change umem to point to NULL, because the MR struct is needed to be accessed during MR deregistration phase, so delay kfree too. [ 6.237617] BUG: unable to handle kernel NULL pointer dereference a 0000000000000228 [ 6.238756] IP: ib_dereg_mr+0xd/0x30 [ 6.239264] PGD 80000000167eb067 P4D 80000000167eb067 PUD 167f9067 PMD 0 [ 6.240320] Oops: 0000 [#1] SMP PTI [ 6.240782] CPU: 0 PID: 367 Comm: dereg Not tainted 4.16.0-rc1-00029-gc198fafe0453 #183 [ 6.242120] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 6.244504] RIP: 0010:ib_dereg_mr+0xd/0x30 [ 6.245253] RSP: 0018:ffffaf5d001d7d68 EFLAGS: 00010246 [ 6.246100] RAX: 0000000000000000 RBX: ffff95d4172daf00 RCX: 0000000000000000 [ 6.247414] RDX: 00000000ffffffff RSI: 0000000000000001 RDI: ffff95d41a317600 [ 6.248591] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [ 6.249810] R10: ffff95d417033c10 R11: 0000000000000000 R12: ffff95d4172c3a80 [ 6.251121] R13: ffff95d4172c3720 R14: ffff95d4172c3a98 R15: 00000000ffffffff [ 6.252437] FS: 0000000000000000(0000) GS:ffff95d41fc00000(0000) knlGS:0000000000000000 [ 6.253887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.254814] CR2: 0000000000000228 CR3: 00000000172b4000 CR4: 00000000000006b0 [ 6.255943] Call Trace: [ 6.256368] remove_commit_idr_uobject+0x1b/0x80 [ 6.257118] uverbs_cleanup_ucontext+0xe4/0x190 [ 6.257855] ib_uverbs_cleanup_ucontext.constprop.14+0x19/0x40 [ 6.258857] ib_uverbs_close+0x2a/0x100 [ 6.259494] __fput+0xca/0x1c0 [ 6.259938] task_work_run+0x84/0xa0 [ 6.260519] do_exit+0x312/0xb40 [ 6.261023] ? __do_page_fault+0x24d/0x490 [ 6.261707] do_group_exit+0x3a/0xa0 [ 6.262267] SyS_exit_group+0x10/0x10 [ 6.262802] do_syscall_64+0x75/0x180 [ 6.263391] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 6.264253] RIP: 0033:0x7f1b39c49488 [ 6.264827] RSP: 002b:00007ffe2de05b68 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 6.266049] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f1b39c49488 [ 6.267187] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 6.268377] RBP: 00007f1b39f258e0 R08: 00000000000000e7 R09: ffffffffffffff98 [ 6.269640] R10: 00007f1b3a147260 R11: 0000000000000246 R12: 00007f1b39f258e0 [ 6.270783] R13: 00007f1b39f2ac20 R14: 0000000000000000 R15: 0000000000000000 [ 6.271943] Code: 74 07 31 d2 e9 25 d8 6c 00 b8 da ff ff ff c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 07 53 48 8b 5f 08 <48> 8b 80 28 02 00 00 e8 f7 d7 6c 00 85 c0 75 04 3e ff 4b 18 5b [ 6.274927] RIP: ib_dereg_mr+0xd/0x30 RSP: ffffaf5d001d7d68 [ 6.275760] CR2: 0000000000000228 [ 6.276200] ---[ end trace a35641f1c474bd20 ]--- Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller <[email protected]> Cc: <[email protected]> Reported-by: Noa Osherovich <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-14RDMAVT: Fix synchronization around percpu_refTejun Heo1-4/+6
rvt_mregion uses percpu_ref for reference counting and RCU to protect accesses from lkey_table. When a rvt_mregion needs to be freed, it first gets unregistered from lkey_table and then rvt_check_refs() is called to wait for in-flight usages before the rvt_mregion is freed. rvt_check_refs() seems to have a couple issues. * It has a fast exit path which tests percpu_ref_is_zero(). However, a percpu_ref reading zero doesn't mean that the object can be released. In fact, the ->release() callback might not even have started executing yet. Proceeding with freeing can lead to use-after-free. * lkey_table is RCU protected but there is no RCU grace period in the free path. percpu_ref uses RCU internally but it's sched-RCU whose grace periods are different from regular RCU. Also, it generally isn't a good idea to depend on internal behaviors like this. To address the above issues, this patch removes the fast exit and adds an explicit synchronize_rcu(). Signed-off-by: Tejun Heo <[email protected]> Acked-by: Dennis Dalessandro <[email protected]> Cc: Mike Marciniszyn <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]>
2018-03-14platform/x86: Fix dell driver init orderDarren Hart (VMware)3-3/+3
Update the initcall ordering to satisfy the following dependency ordering: 1. DCDBAS, ACPI_WMI 2. DELL_SMBIOS, DELL_RBTN 3. DELL_LAPTOP, DELL_WMI By assigning them to the following initcall levels: subsys_initcall: DCDBAS, ACPI_WMI module_init: DELL_SMBIOS, DELL_RBTN late_initcall: DELL_LAPTOP, DELL_WMI Cc: Dominik Brodowski <[email protected]> Cc: [email protected] Signed-off-by: Darren Hart (VMware) <[email protected]>
2018-03-14platform/x86: dell-smbios: Resolve dependency error on ACPI_WMIDarren Hart1-3/+4
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled, DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to prevent a configuration where DELL_SMBIOS=y and either backend dependency =m. Update the comment accordingly. Cc: Mario Limonciello <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Dominik Brodowski <[email protected]> Signed-off-by: Darren Hart (VMware) <[email protected]>
2018-03-14sunvnet: does not support GSO for sctpCathy Zhou1-1/+1
The NETIF_F_GSO_SOFTWARE implies support for GSO on SCTP, but the sunvnet driver does not support GSO for sctp. Here we remove the NETIF_F_GSO_SOFTWARE feature flag and only report NETIF_F_ALL_TSO instead. Signed-off-by: Cathy Zhou <[email protected]> Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14Merge tag 'linux-can-fixes-for-4.16-20180314' of ↵David S. Miller2-40/+65
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-03-14 this is a pull request of two patches for net/master. Both patches are by Andri Yngvason and fix problems in the cc770 driver, that show up quite fast on RT systems, but also on non RT setups. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-14tg3: prevent scheduling while atomic splatJonathan Toppins1-1/+1
The problem was introduced in commit 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes"). The bug occurs because tp->lock spinlock is held which is obtained in tg3_start by way of tg3_full_lock(), line 11571. The documentation for usleep_range() specifically states it cannot be used inside a spinlock. Fixes: 506b0a395f26 ("[netdrv] tg3: APE heartbeat changes") Signed-off-by: Jonathan Toppins <[email protected]> Acked-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14dpaa_eth: remove duplicate increment of the tx_errors counterCamelia Groza1-1/+0
The tx_errors counter is incremented by the dpaa_xmit caller. Signed-off-by: Camelia Groza <[email protected]> Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14dpaa_eth: increment the RX dropped counter when neededCamelia Groza1-1/+3
Signed-off-by: Camelia Groza <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14dpaa_eth: remove duplicate initializationCamelia Groza1-1/+0
The fd_format has already been initialized at this point. Signed-off-by: Camelia Groza <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14dpaa_eth: fix error in dpaa_remove()Madalin Bucur1-1/+1
The recent changes that make the driver probing compatible with DSA were not propagated in the dpa_remove() function, breaking the module unload function. Using the proper device to address the issue. Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14soc/fsl/qbman: fix issue in qman_delete_cgr_safe()Madalin Bucur1-23/+5
The wait_for_completion() call in qman_delete_cgr_safe() was triggering a scheduling while atomic bug, replacing the kthread with a smp_call_function_single() call to fix it. Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: Roy Pledge <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-14Merge tag 'usb-4.16-rc6' of ↵Linus Torvalds21-217/+204
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a small clump of USB fixes for 4.16-rc6. Nothing major, just a number of fixes in lots of different drivers, as well as a PHY driver fix that snuck into this tree. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'usb-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) usb: musb: Fix external abort in musb_remove on omap2430 phy: qcom-ufs: add MODULE_LICENSE tag usb: typec: tcpm: fusb302: Do not log an error on -EPROBE_DEFER USB: OHCI: Fix NULL dereference in HCDs using HCD_LOCAL_MEM usbip: vudc: fix null pointer dereference on udc->lock xhci: Fix front USB ports on ASUS PRIME B350M-A usb: host: xhci-plat: revert "usb: host: xhci-plat: enable clk in resume timing" usb: usbmon: Read text within supplied buffer size usb: host: xhci-rcar: add support for r8a77965 USB: storage: Add JMicron bridge 152d:2567 to unusual_devs.h usb: xhci: dbc: Fix lockdep warning xhci: fix endpoint context tracer output Revert "typec: tcpm: Only request matching pdos" usb: musb: call pm_runtime_{get,put}_sync before reading vbus registers usb: quirks: add control message delay for 1b1c:1b20 uas: fix comparison for error code usb: gadget: udc: renesas_usb3: add binging for r8a77965 usb: renesas_usbhs: add binding for r8a77965 usb: dwc2: fix STM32F7 USB OTG HS compatible dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding ...
2018-03-14Merge tag 'tty-4.16-rc6' of ↵Linus Torvalds8-5/+41
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty core and serial driver fixes for 4.16-rc6. They resolve some newly reported bugs, as well as some very old ones, which is always nice to see. There is also a new device id added in here for good measure. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: imx: fix bogus dev_err serial: sh-sci: prevent lockup on full TTY buffers serial: 8250_pci: Add Brainboxes UC-260 4 port serial device earlycon: add reg-offset to physical address before mapping serial: core: mark port as initialized in autoconfig serial: 8250_pci: Don't fail on multiport card class tty/serial: atmel: add new version check for usart tty: make n_tty_read() always abort if hangup is in progress
2018-03-14Merge tag 'staging-4.16-rc6' of ↵Linus Torvalds2-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are three staging driver fixes for 4.16-rc6 Two of them are lockdep fixes for the ashmem driver that have been reported by a number of people recently. The last one is a fix for the comedi driver core. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ashmem: Fix possible deadlock in ashmem_ioctl staging: comedi: fix comedi_nsamples_left. staging: android: ashmem: Fix lockdep issue during llseek
2018-03-14libata: Enable queued TRIM for Samsung SSD 860Ju Hyung Park1-1/+3
Samsung explicitly states that queued TRIM is supported for Linux with 860 PRO and 860 EVO. Make the previous blacklist to cover only 840 and 850 series. Signed-off-by: Park Ju Hyung <[email protected]> Reviewed-by: Martin K. Petersen <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: [email protected]
2018-03-14can: cc770: Fix queue stall & dropped RTR replyAndri Yngvason2-28/+68
While waiting for the TX object to send an RTR, an external message with a matching id can overwrite the TX data. In this case we must call the rx routine and then try transmitting the message that was overwritten again. The queue was being stalled because the RX event did not generate an interrupt to wake up the queue again and the TX event did not happen because the TXRQST flag is reset by the chip when new data is received. According to the CC770 datasheet the id of a message object should not be changed while the MSGVAL bit is set. This has been fixed by resetting the MSGVAL bit before modifying the object in the transmit function and setting it after. It is not enough to set & reset CPUUPD. It is important to keep the MSGVAL bit reset while the message object is being modified. Otherwise, during RTR transmission, a frame with matching id could trigger an rx-interrupt, which would cause a race condition between the interrupt routine and the transmit function. Signed-off-by: Andri Yngvason <[email protected]> Tested-by: Richard Weinberger <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2018-03-14can: cc770: Fix stalls on rt-linux, remove redundant IRQ ackAndri Yngvason1-15/+0
This has been reported to cause stalls on rt-linux. Suggested-by: Richard Weinberger <[email protected]> Tested-by: Richard Weinberger <[email protected]> Signed-off-by: Andri Yngvason <[email protected]> Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2018-03-13libnvdimm: remove redundant assignment to pointer 'dev'Colin Ian King1-1/+1
Pointer dev is being assigned a value that is never read, it is being re-assigned the same value later on, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/nvdimm/pfn_devs.c:307:17: warning: Value stored to 'dev' during its initialization is never read Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Ross Zwisler <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2018-03-13IB/mlx5: Fix integer overflows in mlx5_ib_create_srqBoris Pismenny1-6/+9
This patch validates user provided input to prevent integer overflow due to integer manipulation in the mlx5_ib_create_srq function. Cc: syzkaller <[email protected]> Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-13IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rqBoris Pismenny1-7/+16
Add a check for the length of the qpin structure to prevent out-of-bounds reads BUG: KASAN: slab-out-of-bounds in create_raw_packet_qp+0x114c/0x15e2 Read of size 8192 at addr ffff880066b99290 by task syz-executor3/549 CPU: 3 PID: 549 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0x8d/0xd4 print_address_description+0x73/0x290 kasan_report+0x25c/0x370 ? create_raw_packet_qp+0x114c/0x15e2 memcpy+0x1f/0x50 create_raw_packet_qp+0x114c/0x15e2 ? create_raw_packet_qp_tis.isra.28+0x13d/0x13d ? lock_acquire+0x370/0x370 create_qp_common+0x2245/0x3b50 ? destroy_qp_user.isra.47+0x100/0x100 ? kasan_kmalloc+0x13d/0x170 ? sched_clock_cpu+0x18/0x180 ? fs_reclaim_acquire.part.15+0x5/0x30 ? __lock_acquire+0xa11/0x1da0 ? sched_clock_cpu+0x18/0x180 ? kmem_cache_alloc_trace+0x17e/0x310 ? mlx5_ib_create_qp+0x30e/0x17b0 mlx5_ib_create_qp+0x33d/0x17b0 ? sched_clock_cpu+0x18/0x180 ? create_qp_common+0x3b50/0x3b50 ? lock_acquire+0x370/0x370 ? __radix_tree_lookup+0x180/0x220 ? uverbs_try_lock_object+0x68/0xc0 ? rdma_lookup_get_uobject+0x114/0x240 create_qp.isra.5+0xce4/0x1e20 ? ib_uverbs_ex_create_cq_cb+0xa0/0xa0 ? copy_ah_attr_from_uverbs.isra.2+0xa00/0xa00 ? ib_uverbs_cq_event_handler+0x160/0x160 ? __might_fault+0x17c/0x1c0 ib_uverbs_create_qp+0x21b/0x2a0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ib_uverbs_write+0x55a/0xad0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_destroy_cq+0x2e0/0x2e0 ? ib_uverbs_open+0x760/0x760 ? futex_wake+0x147/0x410 ? check_prev_add+0x1680/0x1680 ? do_futex+0x3d3/0xa60 ? sched_clock_cpu+0x18/0x180 __vfs_write+0xf7/0x5c0 ? ib_uverbs_open+0x760/0x760 ? kernel_read+0x110/0x110 ? lock_acquire+0x370/0x370 ? __fget+0x264/0x3b0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x4477b9 RSP: 002b:00007f1822cadc18 EFLAGS: 00000292 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00000000004477b9 RDX: 0000000000000070 RSI: 000000002000a000 RDI: 0000000000000005 RBP: 0000000000708000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000292 R12: 00000000ffffffff R13: 0000000000005d70 R14: 00000000006e6e30 R15: 0000000020010ff0 Allocated by task 549: __kmalloc+0x15e/0x340 kvmalloc_node+0xa1/0xd0 create_user_qp.isra.46+0xd42/0x1610 create_qp_common+0x2e63/0x3b50 mlx5_ib_create_qp+0x33d/0x17b0 create_qp.isra.5+0xce4/0x1e20 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0x55a/0xad0 __vfs_write+0xf7/0x5c0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x18/0x85 Freed by task 368: kfree+0xeb/0x2f0 kernfs_fop_release+0x140/0x180 __fput+0x266/0x700 task_work_run+0x104/0x180 exit_to_usermode_loop+0xf7/0x110 syscall_return_slowpath+0x298/0x370 entry_SYSCALL_64_fastpath+0x83/0x85 The buggy address belongs to the object at ffff880066b99180 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 272 bytes inside of 512-byte region [ffff880066b99180, ffff880066b99380) The buggy address belongs to the page: page:000000006040eedd count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 0000000180190019 raw: ffffea00019a7500 0000000b0000000b ffff88006c403080 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff880066b99180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff880066b99200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880066b99280: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff880066b99300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff880066b99380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Cc: syzkaller <[email protected]> Fixes: 0fb2ed66a14c ("IB/mlx5: Add create and destroy functionality for Raw Packet QP") Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-03-13dm mpath: eliminate need to use scsi_device_from_queueMike Snitzer1-9/+8
Instead of scsi_device_from_queue(), use scsi_dh_attached_handler_name() -- whose implementation uses scsi_device_from_queue() to avoid trying to access SCSI-specific resources from non-SCSI devices. Fixes buildbot reported issue when CONFIG_SCSI isn't set: ERROR: "scsi_device_from_queue" [drivers/md/dm-multipath.ko] undefined! Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Signed-off-by: Mike Snitzer <[email protected]>
2018-03-13dm mpath: fix uninitialized 'pg_init_wait' waitqueue_head NULL pointerMike Snitzer1-11/+10
Initialize all the scsi_dh related 'struct multipath' members regardless of whether a scsi_dh is in use or not. The subtle (and fragile) SCSI-assuming legacy code clearly needs further decoupling from non-SCSI (and/or developer understanding). Fixes: 8d47e65948dd ("dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks") Reported-by: Bart Van Assche <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2018-03-13auxdisplay: img-ascii-lcd: Silence 2 uninitialized warningsMiguel Ojeda1-2/+2
The warnings are: drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used uninitialized in this function [-Wuninitialized] At lines 109 and 207. Reported by Geert using the build service several times, e.g.: https://lkml.org/lkml/2018/2/19/303 They are two false positives, since num_chars > 0 in the three present configurations (boston, malta, sead3). Initialize to 0 in order to silence the warning. Cc: Geert Uytterhoeven <[email protected]> Cc: Paul Burton <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2018-03-13auxdisplay: img-ascii-lcd: Fix doc comment to silence warningsMiguel Ojeda1-1/+1
Compiling with W=1 with gcc 7.2.0 gives 2 warnings: drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or member 't' not described in 'img_ascii_lcd_scroll' drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function parameter 'arg' description in 'img_ascii_lcd_scroll' Cc: Paul Burton <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2018-03-13auxdisplay: panel: Change comments to silence fallthrough warningsMiguel Ojeda1-3/+3
Compiling with W=1 with gcc 7.2.0 gives 3 warnings like: drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’: drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall through [-Wimplicit-fallthrough=] Cc: Willy Tarreau <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Signed-off-by: Miguel Ojeda <[email protected]>
2018-03-13usb: musb: Fix external abort in musb_remove on omap2430Merlijn Wajer1-1/+1
This fixes an oops on unbind / module unload (on the musb omap2430 platform). musb_remove function now calls musb_platform_exit before disabling runtime pm. Signed-off-by: Merlijn Wajer <[email protected]> Signed-off-by: Bin Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-03-13qed: Use after free in qed_rdma_free()Dan Carpenter1-1/+1
We're dereferencing "p_hwfn->p_rdma_info" but that is freed on the line before in qed_rdma_resc_free(p_hwfn). Fixes: 9de506a547c0 ("qed: Free RoCE ILT Memory on rmmod qedr") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Michal Kalderon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-13efi/libstub/tpm: Initialize pointer variables to zero for mixed modeArd Biesheuvel1-2/+2
As reported by Jeremy Cline, running the new TPM libstub code in mixed mode (i.e., 64-bit kernel on 32-bit UEFI) results in hangs when invoking the TCG2 protocol, or when accessing the log_tbl pool allocation. The reason turns out to be that in both cases, the 64-bit pointer variables are not fully initialized by the 32-bit EFI code, and so we should take care to zero initialize these variables beforehand, or we'll end up dereferencing bogus pointers. Reported-by: Jeremy Cline <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-12scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe DiscoveryHimanshu Madhani1-1/+0
Commit 7d64c39e64310 fixed regression of FCP discovery when Nport Handle is in-use and relogin is triggered. However, during FCP and FC-NVMe discovery this resulted into only discovering NVMe LUNs. This patch fixes issue where FCP and FC-NVMe protocol is used on same port where assigning FC_NO_LOOP_ID will result into discovery failure for FCP LUNs. Fixes: a084fd68e1d26 ("scsi: qla2xxx: Fix re-login for Nport Handle in use") Signed-off-by: Himanshu Madhani <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2018-03-12scsi: libsas: defer ata device eh commands to libataJason Yan1-20/+13
When ata device doing EH, some commands still attached with tasks are not passed to libata when abort failed or recover failed, so libata did not handle these commands. After these commands done, sas task is freed, but ata qc is not freed. This will cause ata qc leak and trigger a warning like below: WARNING: CPU: 0 PID: 28512 at drivers/ata/libata-eh.c:4037 ata_eh_finish+0xb4/0xcc CPU: 0 PID: 28512 Comm: kworker/u32:2 Tainted: G W OE 4.14.0#1 ...... Call trace: [<ffff0000088b7bd0>] ata_eh_finish+0xb4/0xcc [<ffff0000088b8420>] ata_do_eh+0xc4/0xd8 [<ffff0000088b8478>] ata_std_error_handler+0x44/0x8c [<ffff0000088b8068>] ata_scsi_port_error_handler+0x480/0x694 [<ffff000008875fc4>] async_sas_ata_eh+0x4c/0x80 [<ffff0000080f6be8>] async_run_entry_fn+0x4c/0x170 [<ffff0000080ebd70>] process_one_work+0x144/0x390 [<ffff0000080ec100>] worker_thread+0x144/0x418 [<ffff0000080f2c98>] kthread+0x10c/0x138 [<ffff0000080855dc>] ret_from_fork+0x10/0x18 If ata qc leaked too many, ata tag allocation will fail and io blocked for ever. As suggested by Dan Williams, defer ata device commands to libata and merge sas_eh_finish_cmd() with sas_eh_defer_cmd(). libata will handle ata qcs correctly after this. Signed-off-by: Jason Yan <[email protected]> CC: Xiaofei Tan <[email protected]> CC: John Garry <[email protected]> CC: Dan Williams <[email protected]> Reviewed-by: Dan Williams <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2018-03-12clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe()Wei Yongjun1-3/+2
In case of error, the function dev_get_regmap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Fixes: 81ac38847a1d ("clk: qcom: Add APCS clock controller support") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2018-03-12clk: hisilicon: hi3660：Fix potential NULL dereference in ↵Wei Yongjun1-0/+2
hi3660_stub_clk_probe() platform_get_resource() may return NULL, add proper check to avoid potential NULL dereferencing. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 4f16f7ff3bc0 ("clk: hisilicon: Add support for Hi3660 stub clocks") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2018-03-12Merge branch 'clk-helpers' (early part) into clk-fixesStephen Boyd1-1/+3
* 'clk-helpers' (early part): clk: fix determine rate error with pass-through clock
2018-03-12clk: fix determine rate error with pass-through clockJerome Brunet1-1/+3
If we try to determine the rate of a pass-through clock (a clock which does not implement .round_rate() nor .determine_rate()), clk_core_round_rate_nolock() will directly forward the call to the parent clock. In the particular case where the pass-through actually does not have a parent, clk_core_round_rate_nolock() will directly return 0 with the requested rate still set to the initial request structure. This is interpreted as if the rate could be exactly achieved while it actually cannot be adjusted. This become a real problem when this particular pass-through clock is the parent of a mux with the flag CLK_SET_RATE_PARENT set. The pass-through clock will always report an exact match, get picked and finally error when the rate is actually getting set. This is fixed by setting the rate inside the req to 0 when core is NULL in clk_core_round_rate_nolock() (same as in __clk_determine_rate() when hw is NULL) Fixes: 0f6cc2b8e94d ("clk: rework calls to round and determine rate callbacks") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Michael Turquette <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2018-03-12Merge branch 'clk-phase' into clk-fixesStephen Boyd1-1/+4
* clk-phase: clk: update cached phase to respect the fact when setting phase
2018-03-12Merge tag 'ti-clk-fixes-4.16' of https://github.com/t-kristo/linux-pm into ↵Stephen Boyd3-2/+4
clk-fixes Pull TI SoC clock fixes for 4.16 from Tero Kristo: * tag 'ti-clk-fixes-4.16' of https://github.com/t-kristo/linux-pm: clk: ti: am43xx: add set-rate-parent support for display clkctrl clock clk: ti: am33xx: add set-rate-parent support for display clkctrl clock clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag
2018-03-12Merge tag 'clk-imx-fixes-4.16' of ↵Stephen Boyd1-3/+17
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-fixes Pull i.MX clock fixes for 4.16 from Shawn Guo: - Update i.MX5 clock driver to register UART4/5 clock only on i.MX50 and i.MX53. It fixes a kernel warning seen on i.MX53, caused by commit 59dc3d8c8673 ("clk: imx51: uart4, uart5 gates only exist on imx50, imx53"). * tag 'clk-imx-fixes-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53
2018-03-12Merge tag 'sunxi-clk-fixes-for-4.16' of ↵Stephen Boyd1-3/+3
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Pull Allwinner clock fixes for 4.16 from Chen-Yu Tsai: A critical fix for the A31 sunxi-ng clock driver. The CLK_OUT clocks had definitions paired with the incorrect type of clk ops. This results in a serious oops starting with commit 946797aa3f08 ("clk: sunxi-ng: Support fixed post-dividers on MP style clocks"), which exposed the incorrect clk ops when it added a new field to the data structures, which then nudged the underlying (compatible but incorrect) data structures out of alignment. * tag 'sunxi-clk-fixes-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
2018-03-12Merge branch '1GbE' of ↵David S. Miller3-40/+33
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-03-12 This series contains fixes to e1000e only. Benjamin Poirier provides two fixes, first reverts commits that changed what happens to the link status when there is an error. These commits were to resolve a race condition, but in the process of fixing the race condition, they changed the behavior when an error occurred. Second fix resolves a race condition by not setting "get_link_status" to false after checking the link. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-12e1000e: Fix link check race conditionBenjamin Poirier2-21/+24
Alex reported the following race condition: /* link goes up... interrupt... schedule watchdog */ \ e1000_watchdog_task \ e1000e_has_link \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link \ e1000e_phy_has_link_generic(..., &link) link = true /* link goes down... interrupt */ \ e1000_msix_other hw->mac.get_link_status = true /* link is up */ mac->get_link_status = false link_active = true /* link_active is true, wrongly, and stays so because * get_link_status is false */ Avoid this problem by making sure that we don't set get_link_status = false after having checked the link. It seems this problem has been present since the introduction of e1000e. Link: https://lkml.org/lkml/2018/1/29/338 Reported-by: Alexander Duyck <[email protected]> Signed-off-by: Benjamin Poirier <[email protected]> Acked-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-12Revert "e1000e: Separate signaling for link check/link up"Benjamin Poirier3-19/+9
This reverts commit 19110cfbb34d4af0cdfe14cd243f3b09dc95b013. This reverts commit 4110e02eb45ea447ec6f5459c9934de0a273fb91. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfbb34d is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789 Signed-off-by: Benjamin Poirier <[email protected]> Acked-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-12drm/i915: Kick the rps worker when changing the boost frequencyChris Wilson1-2/+8
The boost frequency is only applied from the RPS worker while someone is waiting on a request and requested a boost. As such, when the user wishes to change the frequency, we have to kick the worker in order to re-evaluate whether to apply the boost frequency. v2: Check num_waiters to decide if we should kick the worker to handle boosting. Fixes: 29ecd78d3b79 ("drm/i915: Define a separate variable and control for RPS waitboost frequency") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 59cd31f177b34deb834a5c97478502741be1cf2e) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-12drm/i915: Only prune fences after wait-for-allChris Wilson1-4/+12
Currently, we only allow ourselves to prune the fences so long as all the waits completed (i.e. all the fences we checked were signaled), and that the reservation snapshot did not change across the wait. However, if we only waited for a subset of the reservation object, i.e. just waiting for the last writer to complete as opposed to all readers as well, then we would erroneously conclude we could prune the fences as indeed although all of our waits were successful, they did not represent the totality of the reservation object. v2: We only need to check the shared fences due to construction (i.e. all of the shared fences will be later than the exclusive fence, if any). Fixes: e54ca9774777 ("drm/i915: Remove completed fences after a wait") Signed-off-by: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Matthew Auld <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit fa73055b8442c97b3ba7cd0aa57cd2ad32124201) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-12drm/i915: Enable VBT based BL control for DPMustamin B Mustaffa1-7/+3
Currently, BXT_PP is hardcoded with value '0'. It practically disabled eDP backlight on MRB (BXT) platform. This patch will tell which BXT_PP registers (there are two set of PP_CONTROL in the spec) to be used as defined in VBT (Video Bios Timing table) and this will enabled eDP backlight controller on MRB (BXT) platform. v2: - Remove unnecessary information in commit message. - Assign vbt.backlight.controller to a backlight_controller variable and return the variable value. v3: - Rebased to latest code base. - updated commit title. Signed-off-by: Mustamin B Mustaffa <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 73c0fcac97bf7f4a6a61b825b205d1cf127cfca7) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-12clk: migrate the count of orphaned clocks at initJerome Brunet1-16/+21
The orphan clocks reparents should migrate any existing count from the orphan clock to its new acestor clocks, otherwise we may have inconsistent counts in the tree and end-up with gated critical clocks Assuming we have two clocks, A and B. * Clock A has CLK_IS_CRITICAL flag set. * Clock B is an ancestor of A which can gate. Clock B gate is left enabled by the bootloader. Step 1: Clock A is registered. Since it is a critical clock, it is enabled. The clock being still an orphan, no parent are enabled. Step 2: Clock B is registered and reparented to clock A (potentially through several other clocks). We are now in situation where the enable count of clock A is 1 while the enable count of its ancestors is 0, which is not good. Step 3: in lateinit, clk_disable_unused() is called, the enable_count of clock B being 0, clock B is gated and and critical clock A actually gets disabled. This situation was found while adding fdiv_clk gates to the meson8b platform. These clocks parent clk81 critical clock, which is the mother of all peripheral clocks in this system. Because of the issue described here, the system is crashing when clk_disable_unused() is called. The situation is solved by reverting commit f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration"). To avoid breaking again the situation described in this commit description, enabling critical clock should be done before walking the orphan list. This way, a parent critical clock may not be accidentally disabled due to the CLK_OPS_PARENT_ENABLE mechanism. Fixes: f8f8f1d04494 ("clk: Don't touch hardware when reparenting during registration") Cc: Stephen Boyd <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Dong Aisheng <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Tested-by: Marek Szyprowski <[email protected]> Tested-by: Heiko Stuebner <[email protected]> Signed-off-by: Michael Turquette <[email protected]>
2018-03-12Merge tag 'linux-can-fixes-for-4.16-20180312' of ↵David S. Miller4-48/+67
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-03-12 this is a pull reqeust of 6 patches for net/master. The first patch is by Wolfram Sang and fixes a bitshift vs. comparison mistake in the m_can driver. Two patches of Marek Vasut repair the error handling in the ifi driver. The two patches by Stephane Grosjean fix a "echo_skb is occupied!" bug in the peak/pcie_fd driver. Bich HEMON's patch adds pinctrl select state calls to the m_can's driver to further improve power saving during suspend. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-12bnxt_en: Check valid VNIC ID in bnxt_hwrm_vnic_set_tpa().Michael Chan1-0/+3
During initialization, if we encounter errors, there is a code path that calls bnxt_hwrm_vnic_set_tpa() with invalid VNIC ID. This may cause a warning in firmware logs. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.