aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-11-23mmc: block: Fix missing blk_put_request()Adrian Hunter1-0/+3
Ensure blk_get_request() is paired with blk_put_request(). Fixes: 0493f6fe5bde ("mmc: block: Move boot partition locking into a driver op") Fixes: 627c3ccfb46a ("mmc: debugfs: Move block debugfs into block module") Signed-off-by: Adrian Hunter <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Cc: [email protected] # 4.13+ Signed-off-by: Ulf Hansson <[email protected]>
2017-11-23cxl: Check if vphb exists before iterating over AFU devicesVaibhav Jain1-2/+10
During an eeh a kernel-oops is reported if no vPHB is allocated to the AFU. This happens as during AFU init, an error in creation of vPHB is a non-fatal error. Hence afu->phb should always be checked for NULL before iterating over it for the virtual AFU pci devices. This patch fixes the kenel-oops by adding a NULL pointer check for afu->phb before it is dereferenced. Fixes: 9e8df8a21963 ("cxl: EEH support") Cc: [email protected] # v4.3+ Signed-off-by: Vaibhav Jain <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Acked-by: Frederic Barrat <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-11-23drm/vblank: Pass crtc_id to page_flip_ioctl.Maarten Lankhorst1-0/+1
We added crtc_id to the atomic ioctl, but forgot to add it for vblank and page flip events. Commit bd386e518056 ("drm: Reorganize drm_pending_event to support future event types [v2]") added it to the vblank event, but page flip event was still missing. Correct this and add a test for making sure we always set crtc_id correctly. Fixes: bd386e518056 ("drm: Reorganize drm_pending_event to support future event types [v2]") Fixes: 5db06a8a98f5 ("drm: Pass CRTC ID in userspace vblank events") Cc: Daniel Stone <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Gustavo Padovan <[email protected]> Cc: Sean Paul <[email protected]> Cc: [email protected] Cc: <[email protected]> # v4.12+ Reviewed-by: Daniel Vetter <[email protected]> #irc Testcase: igt/kms_vblank/crtc_id Signed-off-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-23dma-buf: Fix ifnullfree.cocci warningsVasyl Gomonovych1-2/+1
NULL check before some freeing functions is not needed. drivers/dma-buf/dma-buf.c:1183:2-26: WARNING: NULL check before freeing debugfs_remove_recursive Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by: Vasyl Gomonovych <[email protected]> Signed-off-by: Sumit Semwal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-23drm/printer: Add drm_vprintf()Chris Wilson1-4/+1
Simple va_args equivalent to the existing drm_printf() for use with the drm_printer. v2: Fixup kerneldoc to match final parameter names. v3: Turn it into a kerneldoc comment Signed-off-by: Chris Wilson <[email protected]> Cc: Rob Clark <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Cc: Dave Airlie <[email protected]> Acked-by: Dave Airlie <[email protected]> Signed-off-by: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-23nvme-pci: add quirk for delay before CHK RDY for WDC SN200Jeff Lien2-1/+3
And increase the existing delay to cover this device as well. Cc: [email protected] Signed-off-by: Jeff Lien <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2017-11-22Merge tag 'pwm/for-4.15-rc1' of ↵Linus Torvalds5-36/+251
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The changes for this release include power management improvements for the pwm-img driver, support for the backup mode on pwm-atmel-tcb as well as support for more hardware with the R-Car and Mediatek drivers. To round things off there's a bit of cleanup for sunxi and stm32-lp" * tag 'pwm/for-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: stm32-lp: Remove pwm_is_enabled() check before calling pwm_disable() pwm: mediatek: Add MT2712/MT7622 support pwm: sunxi: Use of_device_get_match_data() pwm: atmel-tcb: Support backup mode dt-bindings: pwm: Add R-Car D3 device tree bindings pwm: img: Add runtime PM pwm: img: Add suspend / resume handling
2017-11-22Merge tag 'rtc-4.15' of ↵Linus Torvalds24-275/+1815
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "There is nothing scary this cycle, mostly driver fixes and updates. The core fix has been in for a while and has been tested on multiple kernel revisions by multiple teams. Core: - Fix setting the alarm to the next expiring timer New drivers: - Mediatek MT7622 RTC - NXP PCF85363 - Spreadtrum SC27xx PMIC RTC Drivers updates: - Use generic nvmem to expose the Non volatile ram for ds1305, ds1511, m48t86 and omap - abx80x: solve possible race condition at probe - armada38x: support trimming the RTC oscillator - at91rm9200: fix reading the alarm value at boot - ds1511: allow waking platform - m41t80: rework square wave output - pcf8523: support trimming the RTC oscillator - pcf8563: fix clock output rate - pl031: make interrupt optional - xgene: fix suspend/resume" * tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) dt-bindings: rtc: imxdi: Improve the bindings text rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation rtc: at91rm9200: fix reading alarm value rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm rtc: sysfs: Use time64_t variables to set time/alarm rtc: xgene: mark PM functions as __maybe_unused rtc: xgene: Fix suspend/resume rtc: pcf8563: don't alway enable the alarm rtc: pcf8563: fix output clock rate rtc: rx8010: Fix for incorrect return value rtc: rx8010: Specify correct address for RX8010_RESV31 rtc: rx8010: Remove duplicate define rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate rtc: m41t80: fix m41t80_sqw_round_rate return value rtc: m41t80: m41t80_sqw_set_rate should return 0 on success rtc: add support for NXP PCF85363 real-time clock rtc: omap: Support scratch registers ...
2017-11-22Merge tag 'for-linus-20171120' of git://git.infradead.org/linux-mtdLinus Torvalds54-708/+1600
Pull MTD updates from Richard Weinberger: "General changes: - Unconfuse get_unmapped_area and point/unpoint driver methods - New partition parser: sharpslpart - Kill GENERIC_IO - Various fixes NAND changes: - Add a flag to mark NANDs that require 3 address cycles to encode a page address - Set a default ECC/free layout when NAND_ECC_NONE is requested - Fix a bug in panic_nand_write() - Another batch of cleanups for the denali driver - Fix PM support in the atmel driver - Remove support for platform data in the omap driver - Fix subpage write in the omap driver - Fix irq handling in the mtk driver - Change link order of mtk_ecc and mtk_nand drivers to speed up boot time - Change log level of ECC error messages in the mxc driver - Patch the pxa3xx driver to support Armada 8k platforms - Add BAM DMA support to the qcom driver - Convert gpio-nand to the GPIO desc API - Fix ECC handling in the mt29f driver SPI-NOR changes: - Introduce system power management support - New mechanism to select the proper .quad_enable() hook by JEDEC ID, when needed, instead of only by manufacturer ID - Add support to new memory parts from Gigadevice, Winbond, Macronix and Everspin - Maintainance for Cadence, Intel, Mediatek and STM32 drivers" * tag 'for-linus-20171120' of git://git.infradead.org/linux-mtd: (85 commits) mtd: Avoid probe failures when mtd->dbg.dfs_dir is invalid mtd: sharpslpart: Add sharpslpart partition parser mtd: Add sanity checks in mtd_write/read_oob() mtd: remove the get_unmapped_area method mtd: implement mtd_get_unmapped_area() using the point method mtd: chips/map_rom.c: implement point and unpoint methods mtd: chips/map_ram.c: implement point and unpoint methods mtd: mtdram: properly handle the phys argument in the point method mtd: mtdswap: fix spelling mistake: 'TRESHOLD' -> 'THRESHOLD' mtd: slram: use memremap() instead of ioremap() kconfig: kill off GENERIC_IO option mtd: Fix C++ comment in include/linux/mtd/mtd.h mtd: constify mtd_partition mtd: plat-ram: Replace manual resource management by devm mtd: nand: Fix writing mtdoops to nand flash. mtd: intel-spi: Add Intel Lewisburg PCH SPI super SKU PCI ID mtd: nand: mtk: fix infinite ECC decode IRQ issue mtd: spi-nor: Add support for mr25h128 mtd: nand: mtk: change the compile sequence of mtk_nand.o and mtk_ecc.o mtd: spi-nor: enable 4B opcodes for mx66l51235l ...
2017-11-23drm/edid: quirk HTC vive headset as non-desktop. [v2]Dave Airlie1-0/+3
This uses the EDID info from my HTC Vive to mark it as non-desktop. v2: Change description from non-standard to non-desktop Reviewed-by: Keith Packard <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2017-11-23drm/fb: add support for not enabling fbcon on non-desktop displays [v2]Dave Airlie1-1/+5
We don't want fbcon to get used on non-desktop dislays, don't pass them as enabled connectors to the fb helper setup. This prevents my HMD from getting disorted fbcon, and from affecting other displays console. v2: Change description from non-standard to non-desktop Reviewed-by: Keith Packard <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2017-11-23drm: add connector info/property for non-desktop displays [v2]Dave Airlie2-2/+23
This adds the infrastructure needed to quirk displays using edid and to mark them a non-desktop. A non-desktop display is one which shouldn't normally be included as a part of a desktop environment. This is meant to cover head mounted devices like HTC Vive. v2: Change description from non-standard to non-desktop, add docs Reviewed-by: Keith Packard <[email protected]> Signed-off-by: Dave Airlie <[email protected]> fixup docs
2017-11-23Merge tag 'tilcdc-4.15-fixes' of https://github.com/jsarha/linux into drm-nextDave Airlie5-380/+0
tilcdc fixes for v4.15 * tag 'tilcdc-4.15-fixes' of https://github.com/jsarha/linux: drm/tilcdc: Remove obsolete "ti,tilcdc,slave" dts binding support
2017-11-23Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie14-25/+37
into drm-next more misc amdgpu fixes. * 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: fix rmmod KCQ disable failed error drm/amdgpu: fix kernel hang when starting VNC server drm/amdgpu: don't skip attributes when powerplay is enabled drm/amd/pp: fix typecast error in powerplay. Revert "drm/radeon: dont switch vt on suspend" drm/amd/amdgpu: fix over-bound accessing in amdgpu_cs_wait_any_fence drm/amd/powerplay: fix unfreeze level smc message for smu7 drm/amdgpu:fix memleak drm/amdgpu:fix memleak in takedown
2017-11-23Merge tag 'imx-drm-next-2017-10-18' of ↵Dave Airlie3-5/+2
git://git.pengutronix.de/git/pza/linux into drm-next drm/imx: various cleanups - Switch to drm_*_get/put() helpers - Use correct parallel-display connector enum: DPI instead of VGA - Remove incorrect unit name from device tree binding documentation example - Remove an unused variable * tag 'imx-drm-next-2017-10-18' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-v3: ipu-dc: Remove unused 'di' variable dt-bindings: fsl-imx-drm: Remove incorrect "@di0" usage drm/imx: parallel-display: use correct connector enum drm/imx: switch to drm_*_get(), drm_*_put() helpers
2017-11-23Merge tag 'drm/tegra/for-4.15-rc1-fixes' of ↵Dave Airlie1-46/+111
git://anongit.freedesktop.org/tegra/linux into drm-next drm/tegra: Fixes for v4.15-rc1 This includes an update to the SOR pad clock programming needed because of some changes that went in through the clock tree. * tag 'drm/tegra/for-4.15-rc1-fixes' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: sor: Reimplement pad clock
2017-11-22drm/edid: Allow HDMI infoframe without VIC or S3DVille Syrjälä10-18/+52
Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from 3D to 2D mode in a timely fashion if the source simply stops sending the HDMI infoframe. The suggested workaround is to keep sending the infoframe even when strictly not necessary (ie. no VIC and no S3D). HDMI 1.4 does allow for this behaviour, stating that sending the infoframe is optional in this case. The infoframe was first specified in HDMI 1.4, so in theory sinks predating that may not appreciate us sending an uknown infoframe their way. To avoid regressions let's try to determine if the sink supports the infoframe or not. Unfortunately there's no direct way to do that, so instead we'll just check if we managed to parse any HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the sink will accept the infoframe. Also if the EDID contains the HDMI 2.0 HDMI Forum VSDB we can assume the sink is prepared to receive the infoframe. v2: Fix getting has_hdmi_infoframe from display_info Always fail constructing the infoframe if the display possibly can't handle it Cc: Shashank Sharma <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Laurent Pinchart <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Reviewed-by: Shashank Sharma <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-22null_blk: fix dev->badblocks leakDavid Disseldorp1-1/+4
null_alloc_dev() allocates memory for dev->badblocks, but cleanup currently only occurs in the configfs release codepath, missing a number of other places. This bug was found running the blktests block/010 test, alongside kmemleak: rapido1:/blktests# ./check block/010 ... rapido1:/blktests# echo scan > /sys/kernel/debug/kmemleak [ 306.966708] kmemleak: 32 new suspected memory leaks (see /sys/kernel/debug/kmemleak) rapido1:/blktests# cat /sys/kernel/debug/kmemleak unreferenced object 0xffff88001f86d000 (size 4096): comm "modprobe", pid 231, jiffies 4294892415 (age 318.252s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff814b0379>] kmemleak_alloc+0x49/0xa0 [<ffffffff810f180f>] kmem_cache_alloc+0x9f/0xe0 [<ffffffff8124e45f>] badblocks_init+0x2f/0x60 [<ffffffffa0019fae>] 0xffffffffa0019fae [<ffffffffa0021273>] nullb_device_badblocks_store+0x63/0x130 [null_blk] [<ffffffff810004cd>] do_one_initcall+0x3d/0x170 [<ffffffff8109fe0d>] do_init_module+0x56/0x1e9 [<ffffffff8109ebd7>] load_module+0x1c47/0x26a0 [<ffffffff8109f819>] SyS_finit_module+0xa9/0xd0 [<ffffffff814b4f60>] entry_SYSCALL_64_fastpath+0x13/0x94 Fixes: 2f54a613c942 ("nullb: badbblocks support") Reviewed-by: Shaohua Li <[email protected]> Signed-off-by: David Disseldorp <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2017-11-22video/hdmi: Allow "empty" HDMI infoframesVille Syrjälä1-20/+31
HDMI 2.0 Appendix F suggest that we should keep sending the infoframe when switching from 3D to 2D mode, even if the infoframe isn't strictly necessary (ie. not needed to transmit the VIC or stereo information). This is a workaround against some sinks that fail to realize that they should switch from 3D to 2D mode when the source stop transmitting the infoframe. v2: Handle unpack() as well Pull the length calculation into a helper Cc: Shashank Sharma <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Hans Verkuil <[email protected]> Cc: [email protected] Reviewed-by: Andrzej Hajda <[email protected]> #v1 Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Shashank Sharma <[email protected]>
2017-11-21i40evf: Use smp_rmb rather than read_barrier_dependsBrian King1-1/+1
The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with i40evf as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable <[email protected]> Signed-off-by: Brian King <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21fm10k: Use smp_rmb rather than read_barrier_dependsBrian King1-1/+1
The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with fm10k as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable <[email protected]> Signed-off-by: Brian King <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21igb: Use smp_rmb rather than read_barrier_dependsBrian King1-1/+1
The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with igb as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable <[email protected]> Signed-off-by: Brian King <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21igbvf: Use smp_rmb rather than read_barrier_dependsBrian King1-1/+1
The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with igbvf as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable <[email protected]> Signed-off-by: Brian King <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21ixgbevf: Use smp_rmb rather than read_barrier_dependsBrian King1-1/+1
The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with ixgbevf as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable <[email protected]> Signed-off-by: Brian King <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21i40e: Use smp_rmb rather than read_barrier_dependsBrian King2-2/+2
The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with i40e as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable <[email protected]> Signed-off-by: Brian King <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21ixgbe: Fix skb list corruption on Power systemsBrian King1-1/+1
This patch fixes an issue seen on Power systems with ixgbe which results in skb list corruption and an eventual kernel oops. The following is what was observed: CPU 1 CPU2 ============================ ============================ 1: ixgbe_xmit_frame_ring ixgbe_clean_tx_irq 2: first->skb = skb eop_desc = tx_buffer->next_to_watch 3: ixgbe_tx_map read_barrier_depends() 4: wmb check adapter written status bit 5: first->next_to_watch = tx_desc napi_consume_skb(tx_buffer->skb ..); 6: writel(i, tx_ring->tail); The read_barrier_depends is insufficient to ensure that tx_buffer->skb does not get loaded prior to tx_buffer->next_to_watch, which then results in loading a stale skb pointer. This patch replaces the read_barrier_depends with smp_rmb to ensure loads are ordered with respect to the load of tx_buffer->next_to_watch. Cc: stable <[email protected]> Signed-off-by: Brian King <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21i40e: restore promiscuous after resetAlan Brady1-72/+83
After a reset we rebuild the VSIs which is going to clobber any promiscuous settings we had before reset. This makes it so that we restore the promiscuous settings we had before reset. Signed-off-by: Alan Brady <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21i40evf: fix client notify of l2 paramsAlan Brady2-17/+31
The current method for notifying clients of l2 parameters is broken because we fail to copy the new parameters to the client instance struct, we need to do the notification before the client 'open' function pointer gets called, and lastly we should set the l2 parameters when first adding a client instance. This patch first introduces the i40evf_client_get_params function to prevent code duplication in the i40evf_client_add_instance and the i40evf_notify_client_l2_params functions. We then fix the notify l2 params function to actually copy the parameters to client instance struct and do the same in the *_add_instance' function. Lastly this patch reorganizes the priority in which client tasks fire so that if the flag for notifying l2 params is set, it will trigger before the open because the client needs these new parameters as part of a client open task. Signed-off-by: Alan Brady <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21i40e: Fix FLR reset timeout issueFilip Sadowski1-0/+7
This patch allows detection of upcoming core reset in case NIC gets stuck while performing FLR reset. The i40e_pf_reset() function returns I40E_ERR_NOT_READY when global reset was detected. Signed-off-by: Filip Sadowski <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21i40e: Remove limit of 64 max queues per channelAmritha Nambiar2-9/+0
It is safe to remove the upper limit of 64 queues on a channel VSI. The upper bound is determined by the VSI's num_queue_pairs and gets validated when the queue mapping info through mqprio interface is subject to bound checking in the driver. Signed-off-by: Amritha Nambiar <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21i40e: fix the calculation of VFs mac addressesZijie Pan1-10/+11
num_mac should be increased only after the call to i40e_add_mac_filter(). Fixes: 5f527ba962e2 ("i40e: Limit the number of MAC and VLAN addresses that can be added for VFs") Signed-off-by: Zijie Pan <[email protected]> Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: Tushar Dave <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21i40e: Fix for NUP NVM image downgrade failureJacob Keller4-4/+14
Since commit 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices") we've used the NVM lock to synchronize NVM reads even on devices which don't strictly need the lock. Doing so can cause a regression on older firmware prior to 1.5, especially when downgrading the firmware. Fix this by only grabbing the lock if we're running on an X722 device (which requires the lock as it uses the AdminQ to read the NVM), or if we're currently running 1.5 or newer firmware. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-11-21treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE castsKees Cook28-58/+58
With all callbacks converted, and the timer callback prototype switched over, the TIMER_FUNC_TYPE cast is no longer needed, so remove it. Conversion was done with the following scripts: perl -pi -e 's|\(TIMER_FUNC_TYPE\)||g' \ $(git grep TIMER_FUNC_TYPE | cut -d: -f1 | sort -u) perl -pi -e 's|\(TIMER_DATA_TYPE\)||g' \ $(git grep TIMER_DATA_TYPE | cut -d: -f1 | sort -u) The now unused macros are also dropped from include/linux/timer.h. Signed-off-by: Kees Cook <[email protected]>
2017-11-21treewide: setup_timer() -> timer_setup() (2 field)Kees Cook12-53/+53
This converts all remaining setup_timer() calls that use a nested field to reach a struct timer_list. Coccinelle does not have an easy way to match multiple fields, so a new script is needed to change the matches of "&_E->_timer" into "&_E->_field1._timer" in all the rules. spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup-2fields.cocci @fix_address_of depends@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _field1; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_field1._timer, NULL, _E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E->_field1._timer, NULL, (_cast_data)_E); +timer_setup(&_E->_field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, &_E); +timer_setup(&_E._field1._timer, NULL, 0); | -setup_timer(&_E._field1._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._field1._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _field1; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_field1._timer, _callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._field1._timer, _callback, 0); | _E->_field1._timer@_stl.function = _callback; | _E->_field1._timer@_stl.function = &_callback; | _E->_field1._timer@_stl.function = (_cast_func)_callback; | _E->_field1._timer@_stl.function = (_cast_func)&_callback; | _E._field1._timer@_stl.function = _callback; | _E._field1._timer@_stl.function = &_callback; | _E._field1._timer@_stl.function = (_cast_func)_callback; | _E._field1._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _field1._timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _field1._timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _field1._timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _field1._timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_field1._timer, _callback, 0); +setup_timer(&_E->_field1._timer, _callback, (_cast_data)_E); | -timer_setup(&_E._field1._timer, _callback, 0); +setup_timer(&_E._field1._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._field1._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._field1; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_field1._timer | -(_cast_data)&_E +&_E._field1._timer | -_E +&_E->_field1._timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _field1; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_field1._timer, _callback, 0); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0L); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E->_field1._timer, _callback, 0UL); +timer_setup(&_E->_field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0L); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_E._field1._timer, _callback, 0UL); +timer_setup(&_E._field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0L); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(&_field1._timer, _callback, 0UL); +timer_setup(&_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0L); +timer_setup(_field1._timer, _callback, 0); | -setup_timer(_field1._timer, _callback, 0UL); +timer_setup(_field1._timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <[email protected]>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook181-730/+643
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <[email protected]>
2017-11-21treewide: init_timer() -> setup_timer()Kees Cook26-97/+47
This mechanically converts all remaining cases of ancient open-coded timer setup with the old setup_timer() API, which is the first step in timer conversions. This has no behavioral changes, since it ultimately just changes the order of assignment to fields of struct timer_list when finding variations of: init_timer(&t); f.function = timer_callback; t.data = timer_callback_arg; to be converted into: setup_timer(&t, timer_callback, timer_callback_arg); The conversion is done with the following Coccinelle script, which is an improved version of scripts/cocci/api/setup_timer.cocci, in the following ways: - assignments-before-init_timer() cases - limit the .data case removal to the specific struct timer_list instance - handling calls by dereference (timer->field vs timer.field) spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/setup_timer.cocci @fix_address_of@ expression e; @@ init_timer( -&(e) +&e , ...) // Match the common cases first to avoid Coccinelle parsing loops with // "... when" clauses. @match_immediate_function_data_after_init_timer@ expression e, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) @match_immediate_function_data_before_init_timer@ expression e, func, da; @@ ( -\(e.function\|e->function\) = func; -\(e.data\|e->data\) = da; | -\(e.data\|e->data\) = da; -\(e.function\|e->function\) = func; ) -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @match_function_and_data_after_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ -init_timer +setup_timer ( \(&e\|e\) +, func, da ); ... when != func = e2 when != da = e3 ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) @match_function_and_data_before_init_timer@ expression e, e2, e3, e4, e5, func, da; @@ ( -e.function = func; ... when != da = e4 -e.data = da; | -e->function = func; ... when != da = e4 -e->data = da; | -e.data = da; ... when != func = e5 -e.function = func; | -e->data = da; ... when != func = e5 -e->function = func; ) ... when != func = e2 when != da = e3 -init_timer +setup_timer ( \(&e\|e\) +, func, da ); @r1 exists@ expression t; identifier f; position p; @@ f(...) { ... when any init_timer@p(\(&t\|t\)) ... when any } @r2 exists@ expression r1.t; identifier g != r1.f; expression e8; @@ g(...) { ... when any \(t.data\|t->data\) = e8 ... when any } // It is dangerous to use setup_timer if data field is initialized // in another function. @script:python depends on r2@ p << r1.p; @@ cocci.include_match(False) @r3@ expression r1.t, func, e7; position r1.p; @@ ( -init_timer@p(&t); +setup_timer(&t, func, 0UL); ... when != func = e7 -t.function = func; | -t.function = func; ... when != func = e7 -init_timer@p(&t); +setup_timer(&t, func, 0UL); | -init_timer@p(t); +setup_timer(t, func, 0UL); ... when != func = e7 -t->function = func; | -t->function = func; ... when != func = e7 -init_timer@p(t); +setup_timer(t, func, 0UL); ) Signed-off-by: Kees Cook <[email protected]>
2017-11-21treewide: Switch DEFINE_TIMER callbacks to struct timer_list *Kees Cook26-56/+56
This changes all DEFINE_TIMER() callbacks to use a struct timer_list pointer instead of unsigned long. Since the data argument has already been removed, none of these callbacks are using their argument currently, so this renames the argument to "unused". Done using the following semantic patch: @match_define_timer@ declarer name DEFINE_TIMER; identifier _timer, _callback; @@ DEFINE_TIMER(_timer, _callback); @change_callback depends on match_define_timer@ identifier match_define_timer._callback; type _origtype; identifier _origarg; @@ void -_callback(_origtype _origarg) +_callback(struct timer_list *unused) { ... } Signed-off-by: Kees Cook <[email protected]>
2017-11-21lightnvm: Convert timers to use timer_setup()Kees Cook6-13/+13
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Matias Bjorling <[email protected]> Cc: [email protected] Signed-off-by: Kees Cook <[email protected]>
2017-11-21drivers/net: cris: Convert timers to use timer_setup()Kees Cook1-19/+17
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: "David S. Miller" <[email protected]> Cc: Kalle Valo <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: "[email protected]" <[email protected]> Cc: Paul Gortmaker <[email protected]> Cc: Philippe Reynes <[email protected]> Cc: [email protected] Signed-off-by: Kees Cook <[email protected]>
2017-11-21drm/vc4: Convert timers to use timer_setup()Kees Cook2-12/+7
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Eric Anholt <[email protected]> Cc: David Airlie <[email protected]> Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Eric Anholt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20171024151648.GA104538@beast Reviewed-by: Eric Anholt <[email protected]>
2017-11-21drm/i915/selftests: Convert timers to use timer_setup()Kees Cook1-3/+3
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jani Nikula <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: David Airlie <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Chris Wilson <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Acked-by: Jani Nikula <[email protected]>
2017-11-21usb: usbatm: Convert timers to use timer_setup()Kees Cook3-20/+29
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Additionally corrects and on-stack timer usage. Cc: Greg Kroah-Hartman <[email protected]> Cc: Duncan Sands <[email protected]> Cc: "Gustavo A. R. Silva" <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Allen Pais <[email protected]>
2017-11-21drivers/firmware: psci: Convert timers to use timer_setup()Kees Cook1-2/+2
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Also adds missing call to destroy_timer_on_stack(). Cc: Mark Rutland <[email protected]> Cc: Lorenzo Pieralisi <[email protected]> Cc: [email protected] Signed-off-by: Kees Cook <[email protected]>
2017-11-22cpufreq: mediatek: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan1-0/+4
This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/cpufreq/mediatek-cpufreq.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2017-11-21cpufreq: Add Loongson machine dependenciesJames Hogan1-0/+2
The MIPS loongson cpufreq drivers don't build unless configured for the correct machine type, due to dependency on machine specific architecture headers and symbols in machine specific platform code. More specifically loongson1-cpufreq.c uses RST_CPU_EN and RST_CPU, neither of which is defined in asm/mach-loongson32/regs-clk.h unless CONFIG_LOONGSON1_LS1B=y, and loongson2_cpufreq.c references loongson2_clockmod_table[], which is only defined in arch/mips/loongson64/lemote-2f/clock.c, i.e. when CONFIG_LEMOTE_MACH2F=y. Add these dependencies to Kconfig to avoid randconfig / allyesconfig build failures (e.g. when based on BMIPS which also has a cpufreq driver). Signed-off-by: James Hogan <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2017-11-21platform/x86: dell-laptop: fix error return code in dell_init()weiyongjun (A)1-1/+3
Fix to return error code -ENOMEM from the kzalloc() error handling case instead of 0, as done elsewhere in this function. Fixes: 549b4930f057 ("platform/x86: dell-smbios: Introduce dispatcher for SMM calls") Signed-off-by: Wei Yongjun <[email protected]> Acked-by: Mario Limonciello <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2017-11-21dma-buf/fence: Fix lock inversion within dma-fence-arrayChris Wilson2-2/+13
Ages ago Rob Clark noted, "Currently with fence-array, we have a potential deadlock situation. If we fence_add_callback() on an array-fence, the array-fence's lock is acquired first, and in it's ->enable_signaling() callback, it will install cbs on it's array-member fences, so the array-member's lock is acquired second. But in the signal path, the array-member's lock is acquired first, and the array-fence's lock acquired second." Rob proposed either extensive changes to dma-fence to unnest the fence-array signaling, or to defer the signaling onto a workqueue. This is a more refined version of the later, that should keep the latency of the fence signaling to a minimum by using an irq-work, which is executed asap. Reported-by: Rob Clark <[email protected]> Suggested-by: Rob Clark <[email protected]> References: [email protected] Signed-off-by: Chris Wilson <[email protected]> Cc: Rob Clark <[email protected]> Cc: Gustavo Padovan <[email protected]> Cc: Sumit Semwal <[email protected]> Cc: Christian König <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Sumit Semwal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds11-33/+60
Pull networking fixes from David Miller: 1) Fix a reference to a module parameter which was lost during the GREv6 receive path rewrite, from Alexey Kodanev. 2) Fix deref before NULL check in ipheth, from Gustavo A. R. Silva. 3) RCU read lock imbalance in tun_build_skb(), from Xin Long. 4) Some stragglers from the mac80211 folks: a) Timer conversions from Kees Cook b) Fix some sequencing issue when cfg80211 is built statically, from Johannes Berg c) Memory leak in mac80211_hwsim, from Ben Hutchings. 5) Add new qmi_wwan device ID, from Sebastian Sjoholm. 6) Fix use after free in tipc, from Jon Maloy. 7) Missing kdoc in nfp driver, from Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: nfp: flower: add missing kdoc tipc: fix access of released memory net: qmi_wwan: add Quectel BG96 2c7c:0296 mlxsw: spectrum: Do not try to create non-existing ports during unsplit mac80211: properly free requested-but-not-started TX agg sessions mac80211_hwsim: Fix memory leak in hwsim_new_radio_nl() cfg80211: initialize regulatory keys/database later mac80211: aggregation: Convert timers to use timer_setup() nl80211: don't expose wdev->ssid for most interfaces mac80211: Convert timers to use timer_setup() net: vxge: Fix some indentation issues net: ena: fix race condition between device reset and link up setup r8169: use same RTL8111EVL green settings as in vendor driver r8169: fix RTL8111EVL EEE and green settings tun: fix rcu_read_lock imbalance in tun_build_skb tcp: when scheduling TLP, time of RTO should account for current ACK usbnet: ipheth: fix potential null pointer dereference in ipheth_carrier_set gre6: use log_ecn_error module parameter in ip6_tnl_rcv()
2017-11-21drm/amdgpu: fix rmmod KCQ disable failed errorWang Hongcheng3-5/+3
If gfx_v8_0_hw_fini is called after amdgpu_ucode_fini_bo, we will hit KCQ disabled failed. Let amdgpu_ucode_fini_bo run after gfx_v8_0_hw_fini. BUG: SWDEV-135547 Reviewed-by: Rex Zhu <[email protected]> Signed-off-by: Wang Hongcheng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-11-21drm/amdgpu: fix kernel hang when starting VNC serverXiangliang.Yu1-4/+1
After starting VNC server or running CTS test, kernel will hang and can see below call trace: [961816] INFO: task khugepaged:42 blocked for more than 120 seconds. [968581] Tainted: G OE 4.13.0 #1 [973495] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [980962] khugepaged D 0 42 2 0x00000000 [980967] Call Trace: [980977] __schedule+0x28d/0x890 [980982] schedule+0x36/0x80 [980986] rwsem_down_read_failed+0x139/0x1c0 [980991] ? update_curr+0x100/0x1c0 [981004] call_rwsem_down_read_failed+0x18/0x30 [981007] down_read+0x20/0x40 [981012] khugepaged_scan_mm_slot+0x78/0x1ac0 [981018] ? __switch_to+0x23e/0x4a0 [981022] ? finish_task_switch+0x79/0x240 [981026] khugepaged+0x146/0x480 [981031] ? remove_wait_queue+0x60/0x60 [981035] kthread+0x109/0x140 [981037] ? khugepaged_scan_mm_slot+0x1ac0/0x1ac0 [981039] ? kthread_park+0x60/0x60 [981044] ret_from_fork+0x25/0x30 After checking code and found 'commit b72cf4fca2bb7 ("drm/amdgpu: move taking mmap_sem into get_user_pages v2")' forget to drop one case of up_read. Signed-off-by: Xiangliang.Yu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.