| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In commit 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display
enable and disable") the DP driver received a drm_bridge instance, which
is always attached to the encoder as a root bridge. However it conflicts
with the panel_bridge support for eDP panels. The panel bridge attaches
to the encoder before the "dp" bridge (DP driver's drm_bridge instance
created in msm_dp_bridge_init()) has a chance to do so. Change
panel bridge attachment to come after the "dp" bridge attachment (and to
use it as a previous bridge).
Fixes: 8a3b4c17f863 ("drm/msm/dp: employ bridge mechanism for display enable and disable")
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220211224006.1797846-2-dmitry.baryshkov@linaro.org
[db: fixed commit message according to Stephen's suggestions]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
DP phy should be initialized and exited symmetrically to avoid
clock being stucked at either on or off error. Add debug info
to cover all DP phy to identify clock issues easily.
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1643828199-8564-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
DP driver is a generic driver which supports both eDP and DP.
For debugging purpose it is required to have capabilities to
differentiate message are generated from eDP or DP. This patch
add connector type into debug messages for this purpose.
Changes in v3:
-- replace original patch into 3 patches
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1643828199-8564-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Some of DP link compliant test expects to return fail-safe mode
if prefer detailed timing mode can not be supported by mainlink's
lane and rate after link training. Therefore add fail-safe mode
into connector mode list as backup mode. This patch fixes test
case 4.2.2.1.
Changes in v2:
-- add Fixes text string
Fixes: 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1643066274-25814-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Each DP link training contains link training 1 followed by link
training 2. There is maximum of 5 retries of DP link training
before declared link training failed. It is required to stop link
training at end of link training 2 if it is failed so that next
link training 1 can start freshly. This patch fixes link compliance
test case 4.3.1.13 (Source Device Link Training EQ Fallback Test).
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 2e0adc765d88 ("drm/msm/dp: do not end dp link training until video is ready")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-5-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Some DP sinkers prefer to use tps4 instead of tps3 during training #2.
This patch will use tps4 to perform link training #2 if sinker's DPCD
supports it.
Changes in V2:
-- replace dp_catalog_ctrl_set_pattern() with dp_catalog_ctrl_set_pattern_state_bit()
Changes in V3:
-- change state_ctrl_bits type to u32 and pattern type to u8
Changes in V4:
-- align } else if { and } else {
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-4-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
DP CTS test case 4.2.2.6 has valid edid with bad checksum on purpose
and expect DP source return correct checksum. During drm edid read,
correct edid checksum is calculated and stored at
connector::real_edid_checksum.
The problem is struct dp_panel::connector never be assigned, instead the
connector is stored in struct msm_dp::connector. When we run compliance
testing test case 4.2.2.6 dp_panel_handle_sink_request() won't have a valid
edid set in struct dp_panel::edid so we'll try to use the connectors
real_edid_checksum and hit a NULL pointer dereference error because the
connector pointer is never assigned.
Changes in V2:
-- populate panel connector at msm_dp_modeset_init() instead of at dp_panel_read_sink_caps()
Changes in V3:
-- remove unhelpful kernel crash trace commit text
-- remove renaming dp_display parameter to dp
Changes in V4:
-- add more details to commit text
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately if aux read
Fixes: 7948fe12d47 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read")
Signee-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-3-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Current DP drivers have regulators, clocks, irq and phy are grouped
together within a function and executed not in a symmetric manner.
This increase difficulty of code maintenance and limited code scalability.
This patch divides the driver life cycle of operation into four states,
resume (including booting up), dongle plugin, dongle unplugged and suspend.
Regulators, core clocks and irq are grouped together and enabled at resume
(or booting up) so that the DP controller is armed and ready to receive HPD
plugin interrupts. HPD plugin interrupt is generated when a dongle plugs
into DUT (device under test). Once HPD plugin interrupt is received, DP
controller will initialize phy so that dpcd read/write will function and
following link training can be proceeded successfully. DP phy will be
disabled after main link is teared down at end of unplugged HPD interrupt
handle triggered by dongle unplugged out of DUT. Finally regulators, code
clocks and irq are disabled at corresponding suspension.
Changes in V2:
-- removed unnecessary dp_ctrl NULL check
-- removed unnecessary phy init_count and power_count DRM_DEBUG_DP logs
-- remove flip parameter out of dp_ctrl_irq_enable()
-- add fixes tag
Changes in V3:
-- call dp_display_host_phy_init() instead of dp_ctrl_phy_init() at
dp_display_host_init() for eDP
Changes in V4:
-- rewording commit text to match this commit changes
Changes in V5:
-- rebase on top of msm-next branch
Changes in V6:
-- delete flip variable
Changes in V7:
-- dp_ctrl_irq_enable/disabe() merged into dp_ctrl_reset_irq_ctrl()
Changes in V8:
-- add more detail comment regrading dp phy at dp_display_host_init()
Changes in V9:
-- remove set phy_initialized to false when -ECONNRESET detected
Changes in v10:
-- group into one series
Changes in v11:
-- drop drm/msm/dp: dp_link_parse_sink_count() return immediately
if aux read
Changes in v12:
-- move dp_display_host_phy_exit() after dp_display_host_deinit()
Changes in v13:
-- do not execute phy_init until plugged_in interrupt for edp, same as DP.
Changes in v14:
-- remove redundant dp->core_initialized = false form dp_pm_suspend.
Changes in v15:
-- remove core_initialized flag check at both host_init and host_deinit
Changes in v16:
-- remove dp_display_host_phy_exit core_initialized=false at dp_pm_suspend
Changes in v17:
-- remove core_initialized checking before execute attention_cb()
Changes in v18:
-- remove core_initialized checking at dp_pm_suspend
Fixes: 8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon Chipsets")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1642531648-8448-2-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The Qualcomm SM8350 platform comes with a single DisplayPort controller,
add support for this in the DisplayPort driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211228045934.1524865-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
dp_debug_init() always returns 0. So, make it a void function and simplify
the only caller accordingly.
While at it remove a useless 'rc' initialization in dp_debug_get()
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/dc2d6f535379dd38a5e3f9ba502f1f2b3d1f56b7.1640201523.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The sc8180x has 2 DP and 1 eDP controllers, add support for these to the
DP driver.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211217002643.2305526-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
In the cleanup path of the MSM DP driver the DP driver's debugfs files
are destroyed by invoking debugfs_remove_recursive() on debug->root,
which during initialization has been set to minor->debugfs_root.
To allow cleaning up the DP driver's debugfs files either each dentry
needs to be kept track of or the files needs to be put in a subdirectory
which can be removed in one go.
By choosing to put the debugfs files in a subdirectory, based on the
name of the associated connector this also solves the problem that these
names would collide as support for multiple DP instances are introduced.
One alternative solution to the problem with colliding file names would
have been to put keep track of the individual files and put them under
the connector's debugfs directory. But while the drm_connector has been
allocated, its associated debugfs directory has not been created at the
time of initialization of the dp_debug.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20211015231702.1784254-1-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
* tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples
dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts
dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support
irqchip/gic-v3-its: Reset each ITS's BASERn register before probe
irqchip/gic-v3-its: Fix build for !SMP
irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap
irqchip/realtek-rtl: Service all pending interrupts
irqchip/realtek-rtl: Fix off-by-one in routing
irqchip/realtek-rtl: Map control data to virq
irqchip/apple-aic: Drop unused ipi_hwirq field
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Drop an unused private data field in the AIC driver
- Various fixes to the realtek-rtl driver
- Make the GICv3 ITS driver compile again in !SMP configurations
- Force reset of the GICv3 ITSs at probe time to avoid issues during kexec
- Yet another kfree/bitmap_free conversion
- Various DT updates (Renesas, SiFive)
Link: https://lore.kernel.org/r/20220128174217.517041-1-maz@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Fix compilation warnings in new mt7621 driver (Sergio Paracuellos)
- Restore the sysfs "rom" file for VGA shadow ROMs, which was broken
when converting "rom" to be a static attribute (Bjorn Helgaas)
* tag 'pci-v5.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/sysfs: Find shadow ROM before static attribute initialization
PCI: mt7621: Remove unused function pcie_rmw()
PCI: mt7621: Drop of_match_ptr() to avoid unused variable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the gpio-simulator:
- fix a bug with hogs not being set-up in gpio-sim when user-space
sets the chip label to an empty string
- include the gpio-sim documentation in the index"
* tag 'gpio-fixes-for-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: add doc file to index file
gpio: sim: check the label length when setting up device properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two small char/misc driver fixes for 5.17-rc2 that fix some
reported issues. They are:
- fix up a merge issue in the at25.c driver that ended up dropping
some lines in the driver. The removed lines ended being needed, so
this restores it and the driver works again.
- counter core fix where the wrong error was being returned, NULL
should be the correct error for when memory is gone here, like the
kmalloc() core does.
Both of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: fix an IS_ERR() vs NULL bug
eeprom: at25: Restore missing allocation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small bug fixes and reverts for reported problems with
the tty core and drivers. They include:
- revert the fifo use for the 8250 console mode. It caused too many
regressions and problems, and had a bug in it as well. This is
being reworked and should show up in a later -rc1 release, but it's
not ready for 5.17
- rpmsg tty race fix
- restore the cyclades.h uapi header file. Turns out a compiler test
suite used it for some unknown reason. Bring it back just for the
parts that are used by the builder test so they continue to build.
No functionality is restored as no one actually has this hardware
anymore, nor is it really tested.
- stm32 driver fixes
- n_gsm flow control fixes
- pl011 driver fix
- rs485 initialization fix
All of these have been in linux-next this week with no reported
problems"
* tag 'tty-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
kbuild: remove include/linux/cyclades.h from header file check
serial: core: Initialize rs485 RTS polarity already on probe
serial: pl011: Fix incorrect rs485 RTS polarity on set_mctrl
serial: stm32: fix software flow control transfer
serial: stm32: prevent TDR register overwrite when sending x_char
tty: n_gsm: fix SW flow control encoding/handling
serial: 8250: of: Fix mapped region size when using reg-offset property
tty: rpmsg: Fix race condition releasing tty port
tty: Partially revert the removal of the Cyclades public API
tty: Add support for Brainboxes UC cards.
Revert "tty: serial: Use fifo in 8250 console driver"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 5.17-rc2 that resolve a
number of reported problems. These include:
- typec driver fixes
- xhci platform driver fixes for suspending
- ulpi core fix
- role.h build fix
- new device ids
- syzbot-reported bugfixes
- gadget driver fixes
- dwc3 driver fixes
- other small fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix segmentation fault in cdns_lost_power function
usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
usb: gadget: at91_udc: fix incorrect print type
usb: dwc3: xilinx: Fix error handling when getting USB3 PHY
usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode
usb: xhci-plat: fix crash when suspend if remote wake enable
usb: common: ulpi: Fix crash in ulpi_match()
usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS
ucsi_ccg: Check DEV_INT bit only when starting CCG4
USB: core: Fix hang in usb_kill_urb by adding memory barriers
usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge
usb: typec: tcpm: Do not disconnect when receiving VSAFE0V
usb: typec: tcpm: Do not disconnect while receiving VBUS off
usb: typec: Don't try to register component master without components
usb: typec: Only attempt to link USB ports if there is fwnode
usb: typec: tcpci: don't touch CC line if it's Vconn source
usb: roles: fix include/linux/usb/role.h compile issue
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request
- add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs (Wu
Zheng)
- remove the unneeded ret variable in nvmf_dev_show (Changcheng
Deng)
- Fix for a hang regression introduced with a patch in the merge
window, where low queue depth devices would not always get woken
correctly (Laibin)
- Small series fixing an IO accounting issue with bio backed dm devices
(Mike, Yu)
* tag 'block-5.17-2022-01-28' of git://git.kernel.dk/linux-block:
dm: properly fix redundant bio-based IO accounting
dm: revert partial fix for redundant bio-based IO accounting
block: add bio_start_io_acct_time() to control start_time
blk-mq: Fix wrong wakeup batch configuration which will cause hang
nvme-fabrics: remove the unneeded ret variable in nvmf_dev_show
nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs
blk-mq: fix missing blk_account_io_done() in error path
block: fix memory leak in disk_register_independent_access_ranges
|
|
Record the start_time for a bio but defer the starting block core's IO
accounting until after IO is submitted using bio_start_io_acct_time().
This approach avoids the need to mess around with any of the
individual IO stats in response to a bio_split() that follows bio
submission.
Reported-by: Bud Brown <bubrown@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Depends-on: e45c47d1f94e ("block: add bio_start_io_acct_time() to control start_time")
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-4-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reverts a1e1cb72d9649 ("dm: fix redundant IO accounting for bios that
need splitting") because it was too narrow in scope (only addressed
redundant 'sectors[]' accounting and not ios, nsecs[], etc).
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-3-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Sixteen patches, mostly minor fixes and updates; however there are
substantive driver bug fixes in pm8001, bnx2fc, zfcp, myrs and qedf"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: myrs: Fix crash in error case
scsi: 53c700: Remove redundant assignment to pointer SCp
scsi: ufs: Treat link loss as fatal error
scsi: ufs: Use generic error code in ufshcd_set_dev_pwr_mode()
scsi: bfa: Remove useless DMA-32 fallback configuration
scsi: hisi_sas: Remove useless DMA-32 fallback configuration
scsi: 3w-sas: Remove useless DMA-32 fallback configuration
scsi: bnx2fc: Flush destroy_work queue before calling bnx2fc_interface_put()
scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devices
scsi: pm8001: Fix bogus FW crash for maxcpus=1
scsi: qedf: Change context reset messages to ratelimited
scsi: qedf: Fix refcount issue when LOGO is received during TMF
scsi: qedf: Add stag_work to all the vports
scsi: ufs: ufshcd-pltfrm: Check the return value of devm_kstrdup()
scsi: target: iscsi: Make sure the np under each tpg is unique
scsi: elx: efct: Don't use GFP_KERNEL under spin lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- avoid UEFI v2.00+ runtime services on Apple Mac systems, as they have
been reported to cause crashes, and most Macs claim to be EFI v1.10
anyway
- avoid a spurious boot time warning on arm64 systems with 64k pages
* tag 'efi-urgent-for-v5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: runtime: avoid EFIv2 runtime services on Apple x86 machines
efi/libstub: arm64: Fix image check alignment at entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Fix screen resolution for hyperv framebuffer (Michael Kelley)
- Fix packet header accounting for balloon driver (Yanming Liu)
* tag 'hyperv-fixes-signed-20220128' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
video: hyperv_fb: Fix validation of screen resolution
Drivers: hv: balloon: account for vmbus packet header in max_pkt_size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
"A single fix for 5.17-rc2, adding a missing resource allocation error
check in the pata_platform driver, from Zhou"
* tag 'ata-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_platform: Fix a NULL pointer dereference in __pata_platform_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix crash in nct6775 driver
- Prevent divide by zero in adt7470 driver
- Fix conditional compile warning in pmbus/ir38064 driver
- Various minor fixes in lm90 driver
* tag 'hwmon-for-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix crash in clear_caseopen
hwmon: (adt7470) Prevent divide by zero in adt7470_fan_write()
hwmon: (pmbus/ir38064) Mark ir38064_of_match as __maybe_unused
hwmon: (lm90) Fix sysfs and udev notifications
hwmon: (lm90) Mark alert as broken for MAX6646/6647/6649
hwmon: (lm90) Mark alert as broken for MAX6680
hwmon: (lm90) Mark alert as broken for MAX6654
hwmon: (lm90) Re-enable interrupts after alert clears
hwmon: (lm90) Reduce maximum conversion rate for G781
|
|
Pull drm fixes from Dave Airlie:
"This week's regular normal fixes. amdgpu and msm make up the bulk of
it, with a scattering of fixes elsewhere.
atomic:
- fix CRTC handling during modeset
privcy-screen:
- honor acpi=off
ttm:
- build fix for um
panel:
- add orientation quirk for 1NetBook OneXPlayer
amdgpu:
- Proper fix for otg synchronization logic regression
- DCN3.01 fixes
- Filter out secondary radeon PCI IDs
- udelay fixes
- Fix a memory leak in an error path
msm:
- parameter check fixes
- put_device balancing
- idle/suspend fixes
etnaviv:
- relax submit size checks
vc4:
- fix potential deadlock in DSI code
ast:
- revert 1600x900 mode change"
* tag 'drm-fixes-2022-01-28' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/privacy-screen: honor acpi=off in detect_thinkpad_privacy_screen
Revert "drm/ast: Support 1600x900 with 108MHz PCLK"
drm/amdgpu/display: Remove t_srx_delay_us.
drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU.
drm/amd/display: Fix FP start/end for dcn30_internal_validate_bw.
drm/amd/display/dc/calcs/dce_calcs: Fix a memleak in calculate_bandwidth()
drm/amdgpu/display: use msleep rather than udelay for long delays
drm/amdgpu/display: adjust msleep limit in dp_wait_for_training_aux_rd_interval
drm/amdgpu: filter out radeon secondary ids as well
drm/amd/display: change FIFO reset condition to embedded display only
drm/amd/display: Correct MPC split policy for DCN301
drm/amd/display: Fix for otg synchronization logic
drm/etnaviv: relax submit size limits
drm/msm/gpu: Cancel idle/boost work on suspend
drm/msm/gpu: Wait for idle before suspending
drm/atomic: Add the crtc to affected crtc only if uapi.enable = true
drm/msm/dsi: invalid parameter check in msm_dsi_phy_enable
drm/msm/a6xx: Add missing suspend_count increment
drm/msm: Fix wrong size calculation
drm/msm/dpu: invalid parameter check in dpu_setup_dspp_pcc
...
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.17-2022-01-26:
amdgpu:
- Proper fix for otg synchronization logic regression
- DCN3.01 fixes
- Filter out secondary radeon PCI IDs
- udelay fixes
- Fix a memory leak in an error path
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127041006.5695-1-alexander.deucher@amd.com
|
|
into drm-fixes
- relax submit size checks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/8c2cb3e3a702be86db9d43ca8927b6b78ac2b1d2.camel@pengutronix.de
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
A few msm fixes.
- parameter checks
- put_device balancing
- idle/suspend fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvAfsgtr==VM4wixAC_hSTuV=eNWXxX=BhZqQrbxHjKgg@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/ast: Revert 1600x800 with 108MHz PCLK
* drm/atomic: fix CRTC handling during modeset
* drm/privacy-screen: Honor acpi=off
* drm/ttm: build fix for ARCH=um
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YfJgH9fz+oo7YSXd@linux-uq9g.fritz.box
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* vc4: Fix potential deadlock in DSI code
* panel: Add orientation quirk for 1Netbook OneXPlayer
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Yepuhj+Ks+IyJ9Dp@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- tcp: add a missing sk_defer_free_flush() in tcp_splice_read()
- tcp: add a stub for sk_defer_free_flush(), fix CONFIG_INET=n
- nf_tables: set last expression in register tracking area
- nft_connlimit: fix memleak if nf_ct_netns_get() fails
- mptcp: fix removing ids bitmap setting
- bonding: use rcu_dereference_rtnl when getting active slave
- fix three cases of sleep in atomic context in drivers: lan966x, gve
- handful of build fixes for esoteric drivers after netdev->dev_addr
was made const
Previous releases - regressions:
- revert "ipv6: Honor all IPv6 PIO Valid Lifetime values", it broke
Linux compatibility with USGv6 tests
- procfs: show net device bound packet types
- ipv4: fix ip option filtering for locally generated fragments
- phy: broadcom: hook up soft_reset for BCM54616S
Previous releases - always broken:
- ipv4: raw: lock the socket in raw_bind()
- ipv4: decrease the use of shared IPID generator to decrease the
chance of attackers guessing the values
- procfs: fix cross-netns information leakage in /proc/net/ptype
- ethtool: fix link extended state for big endian
- bridge: vlan: fix single net device option dumping
- ping: fix the sk_bound_dev_if match in ping_lookup"
* tag 'net-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
net: bridge: vlan: fix memory leak in __allowed_ingress
net: socket: rename SKB_DROP_REASON_SOCKET_FILTER
ipv4: remove sparse error in ip_neigh_gw4()
ipv4: avoid using shared IP generator for connected sockets
ipv4: tcp: send zero IPID in SYNACK messages
ipv4: raw: lock the socket in raw_bind()
MAINTAINERS: add missing IPv4/IPv6 header paths
MAINTAINERS: add more files to eth PHY
net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()
net: bridge: vlan: fix single net device option dumping
net: stmmac: skip only stmmac_ptp_register when resume from suspend
net: stmmac: configure PTP clock source prior to PTP initialization
Revert "ipv6: Honor all IPv6 PIO Valid Lifetime values"
connector/cn_proc: Use task_is_in_init_pid_ns()
pid: Introduce helper task_is_in_init_pid_ns()
gve: Fix GFP flags when allocing pages
net: lan966x: Fix sleep in atomic context when updating MAC table
net: lan966x: Fix sleep in atomic context when injecting frames
ethernet: seeq/ether3: don't write directly to netdev->dev_addr
ethernet: 8390/etherh: don't write directly to netdev->dev_addr
...
|
|
A failing usercopy of the fence_rep object will lead to a stale entry in
the file descriptor table as put_unused_fd() won't release it. This
enables userland to refer to a dangling 'file' object through that still
valid file descriptor, leading to all kinds of use-after-free
exploitation scenarios.
Fix this by deferring the call to fd_install() until after the usercopy
has succeeded.
Fixes: c906965dee22 ("drm/vmwgfx: Add export fence to file descriptor support")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When readl_poll_timeout() timeout, we'd better directly use its return
value.
Before this patch:
[ 2.145528] dwmac-sun8i: probe of 4500000.ethernet failed with error -14
After this patch:
[ 2.138520] dwmac-sun8i: probe of 4500000.ethernet failed with error -110
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When resume from suspend, besides skipping PTP registration, it also
skipping PTP HW initialization. This could cause PTP clock not able to
operate properly when resume from suspend.
To fix this, only stmmac_ptp_register() is skipped when resume from
suspend.
Fixes: fe1319291150 ("stmmac: Don't init ptp again when resume from suspend/hibernation")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For Intel platform, it is required to configure PTP clock source prior PTP
initialization in MAC. So, need to move ptp_clk_freq_config execution from
stmmac_ptp_register() to stmmac_init_ptp().
Fixes: 76da35dc99af ("stmmac: intel: Add PSE and PCH PTP clock source selection")
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg fixes from Bjorn Andersson:
"The cdev cleanup in the rpmsg_char driver was not performed properly,
resulting in unpredicable behaviour when the parent remote processor
is stopped with any of the cdevs open by a client.
Two patches transitions the implementation to use cdev_device_add()
and cdev_del_device(), to capture the relationship between the two
objects, and relocates the incorrectly placed cdev_del()"
* tag 'rpmsg-v5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: char: Fix race between the release of rpmsg_eptdev and cdev
rpmsg: char: Fix race between the release of rpmsg_ctrldev and cdev
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc fix from Bjorn Andersson:
"The interaction between the various Qualcomm remoteproc drivers and
the Qualcomm 'QMP' driver (used to communicate with the
power-management hardware) was reworked in v5.17-rc1, but failed to
account for the new Kconfig dependency"
* tag 'rproc-v5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom: q6v5: fix service routines build errors
|
|
Remove unneeded variable and directly return 0.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming
compliance to a standards version where reporting one is required.
Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a
second such SSDs in a system.
Signed-off-by: Zheng Wu <wu.zheng@intel.com>
Signed-off-by: Ye Jinhe <jinhe.ye@intel.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch replaces open code with task_is_in_init_pid_ns() to check if
a task is in root PID namespace.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.
GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.
Fixes: f5cedc84a30d2 ("gve: Add transmit and receive support")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Link: https://lore.kernel.org/r/20220126003843.3584521-1-awogbemila@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In __pata_platform_probe(), devm_kzalloc() is assigned to ap->ops and
there is a dereference of it right after that, which could introduce a
NULL pointer dereference bug.
Fix this by adding a NULL check of ap->ops.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: f3d5e4f18dba ("ata: pata_of_platform: Allow to use 16-bit wide data transfer")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
|
|
There are 8 callers for devm_counter_alloc() and they all check for NULL
instead of error pointers. I think NULL is the better thing to return
for allocation functions so update counter_alloc() and devm_counter_alloc()
to return NULL instead of error pointers.
Fixes: c18e2760308e ("counter: Provide alternative counter registration functions")
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220111173243.GA2192@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The function lan966x_mac_wait_for_completion is used to poll the status
of the MAC table using the function readx_poll_timeout. The problem with
this function is that is called also from atomic context. Therefore
update the function to use readx_poll_timeout_atomic.
Fixes: e18aba8941b40b ("net: lan966x: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On lan966x, when injecting a frame it was polling the register
QS_INJ_STATUS to see if it can continue with the injection of the frame.
The problem was that it was using readx_poll_timeout which could sleep
in atomic context.
This patch fixes this issue by using readx_poll_timeout_atomic.
Fixes: d28d6d2e37d10d ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev->dev_addr is const now.
Compile tested rpc_defconfig w/ GCC 8.5.
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netdev->dev_addr is const now.
Compile tested rpc_defconfig w/ GCC 8.5.
Fixes: adeef3e32146 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|