aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-11-13drivers/dma/mmp_tdma.c: use gen_pool_dma_alloc() to allocate descriptorNicolin Chen1-6/+1
Since gen_pool_dma_alloc() is introduced, we implement it to simplify code. Signed-off-by: Nicolin Chen <[email protected]> Cc: Dan Williams <[email protected]> Cc: Vinod Koul <[email protected]> Cc: Grant Likely <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13drivers/video/backlight/hx8357.c: remove redundant of_match_ptrSachin Kamat1-1/+1
'hx8357_dt_ids' is always compiled in. Hence of_match_ptr is not needed. Signed-off-by: Sachin Kamat <[email protected]> Acked-by: Maxime Ripard <[email protected]> Acked-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: use gpio_request_oneJohan Hovold1-7/+8
Use devm_gpio_request_one rather than requesting and setting direction in two calls. Signed-off-by: Johan Hovold <[email protected]> Cc: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: refactor gpio_on handlingJohan Hovold1-12/+11
Add helper function to control the gpio_on signal. Signed-off-by: Johan Hovold <[email protected]> Acked-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: use gpio_is_validJohan Hovold1-4/+4
Use gpio_is_valid rather than open coding the more restrictive != -1 test. Signed-off-by: Johan Hovold <[email protected]> Acked-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: remove unused includeJohan Hovold1-1/+0
Remove unused include of clk.h. Signed-off-by: Johan Hovold <[email protected]> Acked-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: clean up get_intensityJohan Hovold1-7/+6
Clean up get_intensity to increase readability. Signed-off-by: Johan Hovold <[email protected]> Acked-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: clean up probe error handlingJohan Hovold1-19/+12
Clean up probe error handling by checking parameters before any allocations and removing an obsolete error label. Also remove unnecessary reset of private gpio number. Signed-off-by: Johan Hovold <[email protected]> Acked-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: fix module autoloadJohan Hovold1-0/+1
Add missing module alias which is needed for module autoloading. Signed-off-by: Johan Hovold <[email protected]> Acked-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: fix gpio polarity in removeJohan Hovold1-2/+4
Make sure to honour gpio polarity also at remove so that the backlight is actually disabled on boards with active-low enable pin. Signed-off-by: Johan Hovold <[email protected]> Acked-by: Jingoo Han <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: fix reported brightnessJohan Hovold1-2/+2
The driver supports 16-bit brightness values, but the value returned from get_brightness was truncated to eight bits. Signed-off-by: Johan Hovold <[email protected]> Cc: Jingoo Han <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13drivers/video/backlight/lm3630a_bl.c: add missing destroy_workqueue() on ↵Wei Yongjun1-0/+1
error in lm3630a_intr_config() Add the missing destroy_workqueue() before return from lm3630a_intr_config() in the error handling case. Signed-off-by: Wei Yongjun <[email protected]> Acked-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: s6e63m0: use devm_{backlight,lcd}_device_register()Jingoo Han1-13/+7
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: cr_bllcd: use devm_{backlight,lcd}_device_register()Jingoo Han1-8/+5
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: corgi_lcd: use devm_{backlight,lcd}_device_register()Jingoo Han1-19/+9
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: ld9040: use devm_{backlight,lcd}_device_register()Jingoo Han1-15/+6
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: ams369fg06: use devm_{backlight,lcd}_device_register()Jingoo Han1-15/+7
Use devm_backlight_device_register() and devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: tdo24m: use devm_lcd_device_register()Jingoo Han1-9/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: platform_lcd: use devm_lcd_device_register()Jingoo Han1-17/+3
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: ltv350qv: use devm_lcd_device_register()Jingoo Han1-8/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: lms501kf03: use devm_lcd_device_register()Jingoo Han1-4/+2
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: lms283gf05: use devm_lcd_device_register()Jingoo Han1-11/+2
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: ili9320: use devm_lcd_device_register()Jingoo Han1-10/+3
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: ili922x: use devm_lcd_device_register()Jingoo Han1-5/+2
Use devm_lcd_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: hx8357: use devm_lcd_device_register()Jingoo Han1-15/+3
Use devm_lcd_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: wm831x_bl: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: tps65217_bl: use devm_backlight_device_register()Jingoo Han1-11/+1
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: pcf50633: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: pandora_bl: use devm_backlight_device_register()Jingoo Han1-10/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: max8925_bl: use devm_backlight_device_register()Jingoo Han1-14/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: lv5207lp: use devm_backlight_device_register()Jingoo Han1-4/+3
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: lp855x: use devm_backlight_device_register()Jingoo Han1-16/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Also, unnecessary lp855x_backlight_unregister() is removed. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: lm3533_bl: use devm_backlight_device_register()Jingoo Han1-6/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: kb3886_bl: use devm_backlight_device_register()Jingoo Han1-14/+4
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: gpio_backlight: use devm_backlight_device_register()Jingoo Han1-11/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: generic_bl: use devm_backlight_device_register()Jingoo Han1-4/+2
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: ep93xx: use devm_backlight_device_register()Jingoo Han1-11/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: da9052_bl: use devm_backlight_device_register()Jingoo Han1-3/+3
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: da903x_bl: use devm_backlight_device_register()Jingoo Han1-11/+3
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: bd6107: use devm_backlight_device_register()Jingoo Han1-2/+2
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: atmel-pwm-bl: use devm_backlight_device_register()Jingoo Han1-6/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: as3711_bl: use devm_backlight_device_register()Jingoo Han1-21/+5
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: adp8870: use devm_backlight_device_register()Jingoo Han1-7/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: adp8860: use devm_backlight_device_register()Jingoo Han1-7/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: adp5520: use devm_backlight_device_register()Jingoo Han1-5/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: aat2870: use devm_backlight_device_register()Jingoo Han1-7/+4
Use devm_backlight_device_register() to make cleanup paths simpler. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: 88pm860x_bl: use devm_backlight_device_register()Jingoo Han1-14/+2
Use devm_backlight_device_register() to make cleanup paths simpler, and remove unnecessary remove(). Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: use dev_get_platdata()Jingoo Han32-46/+44
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: lp8788: staticize 'default_bl_config'Jingoo Han1-1/+1
Fix the following sparse warning: drivers/video/backlight/lp8788_bl.c:55:25: warning: symbol 'default_bl_config' was not declared. Should it be static? Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-11-13backlight: lm3639: don't mix different enum typesJingoo Han1-4/+7
Don't mix different enum types to fix the sparse warnings. drivers/video/backlight/lm3639_bl.c:80:51: warning: mixing different enum types drivers/video/backlight/lm3639_bl.c:80:51: int enum lm3639_fleds versus drivers/video/backlight/lm3639_bl.c:80:51: int enum lm3639_bleds drivers/video/backlight/lm3639_bl.c:82:51: warning: mixing different enum types drivers/video/backlight/lm3639_bl.c:82:51: int enum lm3639_fleds versus drivers/video/backlight/lm3639_bl.c:82:51: int enum lm3639_bleds Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.