aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-03-23mfd: ab8500: world-writable debugfs register-* filesVasiliy Kulikov1-3/+3
Don't allow everybody to interact with hardware registers. Signed-off-by: Vasiliy Kulikov <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: ab3500: world-writable debugfs register-* filesVasiliy Kulikov1-3/+3
Don't allow everybody to interact with hardware registers. Signed-off-by: Vasiliy Kulikov <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: ab3100: world-writable debugfs *_priv filesVasiliy Kulikov1-2/+2
Don't allow everybody to change device hardware registers. Signed-off-by: Vasiliy Kulikov <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: AB8500 system control driverMattias Nilsson2-1/+81
This adds a pretty straight-forward system control driver for the AB8500. This driver will be used from the core platform, e.g the clock tree implementation in the machine code, and is by nature singleton. There are a few simple functions to read, write, set and clear registers so that the machine code can control its own foundation. Cc: Mattias Wallin <[email protected]> Signed-off-by: Mattias Nilsson <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Add fast path for WM831x touchscreen interruptsMark Brown1-0/+12
The WM831x interrupt controller provides reporting of the touchscreen related interrupts in the primary interrupt status register as a performance optimisation - use this to avoid reading the secondary status registers for those interrupts. For code simplicity and to avoid iterating over all interrupts we open code for the two affected interrupt sources. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Convert WM831x SPI to use dev_pm_opsMark Brown1-9/+15
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the WM831x SPI driver. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Invert tps6586x GPIO and subdevices initializationVincent Palatin1-10/+16
When using a fixed voltage regulator triggered by a TPS6586x GPIO, this allows to declare and initialize it conveniently from the "subdev" list. Signed-off-by: Vincent Palatin <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Add BTN_TOUCH event to ucb1x00-tsJochen Friedrich1-1/+4
Add BTN_TOUCH event reporting to ucb1x00_ts touchscreen driver. This will make this touchscreen driver behave consistently wrt. BTN_TOUCH. Signed-off-by: Jochen Friedrich <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Remove obsolete cleanup for wl1273 clientdataWolfram Sang1-2/+0
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Support configuration of WM831x /IRQ output in CMOS modeMark Brown1-0/+8
Provide platform data allowing the system to set the /IRQ pin into CMOS mode rather than the default open drain. The default value of this platform data reflects the default hardware configuration so there should be no change to existing users. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Convert pcf50633 to dev_pm_opsMark Brown1-12/+11
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the pcf50633 driver. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Staticise non-exported symbols in MAX8998 driverMark Brown1-2/+2
No need to have them in the global namespace and sparse complains. Signed-off-by: Mark Brown <[email protected]> Acked-by: Kyungmin Park <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Convert adp5520 to dev_pm_opsMark Brown1-8/+7
There is a move to deprecate bus-specific PM operations and move to using dev_pm_ops instead in order to reduce the amount of boilerplate code in buses and facilitiate updates to the PM core. Do this move for the adp5520 driver. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-23mfd: Leave acknowledgement of WM831x touchscreen IRQs to the driverMark Brown1-0/+3
The WM831x touchscreen interrupts need acknowledgement even when using direct signals to the CPU (which don't go through the core) so leave the acknowledgement up to the touchscreen driver for simplicity. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2011-03-22Merge branch 'next' of ↵Linus Torvalds12-1242/+1902
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (66 commits) avr32: at32ap700x: fix typo in DMA master configuration dmaengine/dmatest: Pass timeout via module params dma: let IMX_DMA depend on IMX_HAVE_DMA_V1 instead of an explicit list of SoCs fsldma: make halt behave nicely on all supported controllers fsldma: reduce locking during descriptor cleanup fsldma: support async_tx dependencies and automatic unmapping fsldma: fix controller lockups fsldma: minor codingstyle and consistency fixes fsldma: improve link descriptor debugging fsldma: use channel name in printk output fsldma: move related helper functions near each other dmatest: fix automatic buffer unmap type drivers, pch_dma: Fix warning when CONFIG_PM=n. dmaengine/dw_dmac fix: use readl & writel instead of __raw_readl & __raw_writel avr32: at32ap700x: Specify DMA Flow Controller, Src and Dst msize dw_dmac: Setting Default Burst length for transfers as 16. dw_dmac: Allow src/dst msize & flow controller to be configured at runtime dw_dmac: Changing type of src_master and dest_master to u8. dw_dmac: Pass Channel Priority from platform_data dw_dmac: Pass Channel Allocation Order from platform_data ...
2011-03-22zlib: slim down zlib_deflate() workspace when possibleJim Keniston1-1/+1
Instead of always creating a huge (268K) deflate_workspace with the maximum compression parameters (windowBits=15, memLevel=8), allow the caller to obtain a smaller workspace by specifying smaller parameter values. For example, when capturing oops and panic reports to a medium with limited capacity, such as NVRAM, compression may be the only way to capture the whole report. In this case, a small workspace (24K works fine) is a win, whether you allocate the workspace when you need it (i.e., during an oops or panic) or at boot time. I've verified that this patch works with all accepted values of windowBits (positive and negative), memLevel, and compression level. Signed-off-by: Jim Keniston <[email protected]> Cc: Herbert Xu <[email protected]> Cc: David Miller <[email protected]> Cc: Chris Mason <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22pps: remove unreachable codeAlexander Gordeev1-5/+0
Remove code enabled only when CONFIG_PREEMPT_RT is turned on because it is not used in the vanilla kernel. Signed-off-by: Alexander Gordeev <[email protected]> Cc: john stultz <[email protected]> Cc: Rodolfo Giometti <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22pnp: only assign IORESOURCE_DMA if CONFIG_ISA_DMA_API is enabledDavid Rientjes3-6/+10
IORESOURCE_DMA cannot be assigned without utilizing the interface provided by CONFIG_ISA_DMA_API, specifically request_dma() and free_dma(). Thus, there's a strict dependency on the config option and limits IORESOURCE_DMA only to architectures that support ISA-style DMA. ia64 is not one of those architectures, so pnp_check_dma() no longer needs to be special-cased for that architecture. pnp_assign_resources() will now return -EINVAL if IORESOURCE_DMA is attempted on such a kernel. Signed-off-by: David Rientjes <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Bjorn Helgaas <[email protected]> Cc: Russell King <[email protected]> Cc: "Luck, Tony" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22rtc: add real-time clock driver for NVIDIA TegraAndrew Chew3-0/+499
This is a platform driver that supports the built-in real-time clock on Tegra SOCs. Signed-off-by: Andrew Chew <[email protected]> Acked-by: Alessandro Zummo <[email protected]> Acked-by: Wan ZongShun <[email protected]> Acked-by: Jon Mayo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/rtc/rtc-ds1511.c: world-writable sysfs nvram fileVasiliy Kulikov1-1/+1
Don't allow everybogy to write to NVRAM. Signed-off-by: Vasiliy Kulikov <[email protected]> Cc: Andy Sharp <[email protected]> Cc: Alessandro Zummo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/rtc/rtc-isl1208.c: add alarm supportRyan Mallon1-5/+171
Add alarm/wakeup support to rtc isl1208 driver Signed-off-by: Ryan Mallon <[email protected]> Cc: Alessandro Zummo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22rtc: convert DS1374 to dev_pm_opsMark Brown1-6/+13
There is a general move to replace bus-specific PM ops with dev_pm_ops in order to facilitate core improvements. Do this conversion for DS1374. Signed-off-by: Mark Brown <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: john stultz <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/mmc/host/omap_hsmmc.c: use resource_size()Chris Ball1-4/+3
Use resource_size(). Signed-off-by: Chris Ball <[email protected]> Cc: Madhusudhan Chikkature <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/mmc/host/omap.c: use resource_size()Chris Ball1-3/+3
Signed-off-by: Chris Ball <[email protected]> Cc: Jarkko Lavinen <[email protected]> Cc: Tony Lindgren <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22sigma-firmware: loader for Analog Devices' SigmaStudioMike Frysinger3-0/+128
Analog Devices' SigmaStudio can produce firmware blobs for devices with these DSPs embedded (like some audio codecs). Allow these device drivers to easily parse and load them. Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22kstrto*: converting strings to integers done (hopefully) rightAlexey Dobriyan1-3/+0
1. simple_strto*() do not contain overflow checks and crufty, libc way to indicate failure. 2. strict_strto*() also do not have overflow checks but the name and comments pretend they do. 3. Both families have only "long long" and "long" variants, but users want strtou8() 4. Both "simple" and "strict" prefixes are wrong: Simple doesn't exactly say what's so simple, strict should not exist because conversion should be strict by default. The solution is to use "k" prefix and add convertors for more types. Enter kstrtoull() kstrtoll() kstrtoul() kstrtol() kstrtouint() kstrtoint() kstrtou64() kstrtos64() kstrtou32() kstrtos32() kstrtou16() kstrtos16() kstrtou8() kstrtos8() Include runtime testsuite (somewhat incomplete) as well. strict_strto*() become deprecated, stubbed to kstrto*() and eventually will be removed altogether. Use kstrto*() in code today! Note: on some archs _kstrtoul() and _kstrtol() are left in tree, even if they'll be unused at runtime. This is temporarily solution, because I don't want to hardcode list of archs where these functions aren't needed. Current solution with sizeof() and __alignof__ at least always works. Signed-off-by: Alexey Dobriyan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/dca/dca-core.c: use list_move() instead of list_del()/list_add() ↵Kirill A. Shutemov1-4/+2
combination Signed-off-by: Kirill A. Shutemov <[email protected]> Cc: Maciej Sosnowski <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/misc/pch_phub.c: add MODULE_DEVICE_TABLEAxel Lin1-0/+1
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <[email protected]> Cc: Masayuki Ohtak <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/misc/ep93xx_pwm.c: world-writable sysfs filesVasiliy Kulikov1-3/+3
Don't allow everybody to change device settings. Signed-off-by: Vasiliy Kulikov <[email protected]> Acked-by: Hartley Sweeten <[email protected]> Cc: Matthieu Crapet <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/misc/atmel_tclib.c: fix a memory leakAxel Lin1-2/+2
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/misc/hmc6352.c: fix wrong return value checking for i2c_master_recv()Axel Lin1-2/+2
i2c_master_recv() returns negative errno, or else the number of bytes read. Thus i2c_master_recv(client, i2c_data, 2) returns 2 instead of 1 in success case. [[email protected]: make `ret' signed] Signed-off-by: Axel Lin <[email protected]> Cc: Kalhan Trisal <[email protected]> Cc: Alan Cox <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/misc/apds9802als.c: put the device into runtime suspend after ↵Hong Liu1-7/+10
resume()/probe() is handled Put the device into runtime suspend after resume()/probe() is handled by the PM core and the device core code. No need to manually add them in each single driver. And correct the runtime state in remove(). Signed-off-by: Hong Liu <[email protected]> Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22ST SPEAr: PCIE gadget suppportPratyush Anand3-0/+919
This is a configurable gadget. can be configured by configfs interface. Any IP available at PCIE bus can be programmed to be used by host controller.It supoorts both INTX and MSI. By default, the gadget is configured for INTX and SYSRAM1 is mapped to BAR0 with size 0x1000 Signed-off-by: Pratyush Anand <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: Jesse Barnes <[email protected]> Cc: Viresh Kumar <[email protected]> Cc: Shiraz Hashim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/misc/bmp085.c: free initmem memoryShubhrajyoti Datta1-3/+3
Free the memory that is used only at init Signed-off-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22bh1780gli: convert to dev pm opsShubhrajyoti Datta1-9/+10
Signed-off-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22pwm_backlight: add check_fb() hookRobert Morell1-0/+11
In systems with multiple framebuffer devices, one of the devices might be blanked while another is unblanked. In order for the backlight blanking logic to know whether to turn off the backlight for a particular framebuffer's blanking notification, it needs to be able to check if a given framebuffer device corresponds to the backlight. This plumbs the check_fb hook from core backlight through the pwm_backlight helper to allow platform code to plug in a check_fb hook. Signed-off-by: Robert Morell <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Arun Murthy <[email protected]> Cc: Linus Walleij <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/video/backlight/jornada720_*.c: make needlessly global symbols staticAxel Lin2-4/+4
The following symbols are needlessly defined global: jornada_bl_init, jornada_bl_exit, jornada_lcd_init, jornada_lcd_exit. Make them static. Signed-off-by: Axel Lin <[email protected]> Acked-by: Kristoffer Ericson <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22backlight: apple_bl depends on ACPIRandy Dunlap1-2/+2
apple_bl uses ACPI interfaces (data & code), so it should depend on ACPI. drivers/video/backlight/apple_bl.c:142: warning: 'struct acpi_device' declared inside parameter list drivers/video/backlight/apple_bl.c:142: warning: its scope is only this definition or declaration, which is probably not what you want drivers/video/backlight/apple_bl.c:201: warning: 'struct acpi_device' declared inside parameter list drivers/video/backlight/apple_bl.c:215: error: variable 'apple_bl_driver' has initializer but incomplete type drivers/video/backlight/apple_bl.c:216: error: unknown field 'name' specified in initializer ... Signed-off-by: Randy Dunlap <[email protected]> Acked-by: Matthew Garrett <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22mbp_nvidia_bl: rename to apple_blMatthew Garrett3-34/+35
It works on hardware other than Macbook Pros, and it works on GPUs other than Nvidia. It should even work on iMacs, so change the name to match reality more precisely and include an alias so existing users don't get confused. Signed-off-by: Matthew Garrett <[email protected]> Acked-by: Richard Purdie <[email protected]> Cc: Mourad De Clerck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22mbp_nvidia_bl: check that the backlight control functionsMatthew Garrett1-0/+13
The SMI-based backlight control functionality may fail to work if the system is running under EFI rather than BIOS. Check that the hardware responds as expected, and exit if it doesn't. Signed-off-by: Matthew Garrett <[email protected]> Acked-by: Richard Purdie <[email protected]> Cc: Mourad De Clerck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22mbp_nvidia_bl: remove DMI dependencyMatthew Garrett3-275/+101
This driver only has to deal with two different classes of hardware, but right now it needs new DMI entries for every new machine. It turns out that there's an ACPI device that uniquely identifies Apples with backlights, so this patch reworks the driver into an ACPI one, identifies the hardware by checking the PCI vendor of the root bridge and strips out all the DMI code. It also changes the config text to clarify that it works on devices other than Macbook Pros and GPUs other than nvidia. Signed-off-by: Matthew Garrett <[email protected]> Acked-by: Richard Purdie <[email protected]> Cc: Mourad De Clerck <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22acpi: tie ACPI backlight devices to PCI devices if possibleMatthew Garrett1-1/+14
Dual-GPU machines may provide more than one ACPI backlight interface. Tie the backlight device to the GPU in order to allow userspace to identify the correct interface. Signed-off-by: Matthew Garrett <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Chris Wilson <[email protected]> Cc: David Airlie <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Zhang Rui <[email protected]> Cc: Len Brown <[email protected]> Cc: Jesse Barnes <[email protected]> Tested-by: Sedat Dilek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22nouveau: change the backlight parent device to the connector, not the PCI devMatthew Garrett4-20/+27
We may eventually end up with per-connector backlights, especially with ddcci devices. Make sure that the parent node for the backlight device is the connector rather than the PCI device. Signed-off-by: Matthew Garrett <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Chris Wilson <[email protected]> Cc: David Airlie <[email protected]> Cc: Alex Deucher <[email protected]> Acked-by: Ben Skeggs <[email protected]> Cc: Zhang Rui <[email protected]> Cc: Len Brown <[email protected]> Cc: Jesse Barnes <[email protected]> Tested-by: Sedat Dilek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22radeon: expose backlight class device for legacy LVDS encoderMichel Dänzer4-6/+273
Allows e.g. power management daemons to control the backlight level. Inspired by the corresponding code in radeonfb. [[email protected]: updated to add backlight type and make the connector the parent device] Signed-off-by: Michel Dänzer <[email protected]> Signed-off-by: Matthew Garrett <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Chris Wilson <[email protected]> Cc: David Airlie <[email protected]> Acked-by: Alex Deucher <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Zhang Rui <[email protected]> Cc: Len Brown <[email protected]> Cc: Jesse Barnes <[email protected]> Tested-by: Sedat Dilek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22backlight: add backlight typeMatthew Garrett57-2/+82
There may be multiple ways of controlling the backlight on a given machine. Allow drivers to expose the type of interface they are providing, making it possible for userspace to make appropriate policy decisions. Signed-off-by: Matthew Garrett <[email protected]> Cc: Richard Purdie <[email protected]> Cc: Chris Wilson <[email protected]> Cc: David Airlie <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Zhang Rui <[email protected]> Cc: Len Brown <[email protected]> Cc: Jesse Barnes <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/leds/leds-lp5523.c: world-writable engine* sysfs filesVasiliy Kulikov1-10/+10
Don't allow everybody to change LED settings. Signed-off-by: Vasiliy Kulikov <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/leds/leds-lp5521.c: world-writable sysfs engine* filesVasiliy Kulikov1-7/+7
Don't allow everybody to change LED settings. Signed-off-by: Vasiliy Kulikov <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22drivers/vidfeo/backlight: ld9040 amoled driver supportDonghwa Lee4-0/+1028
Add a ld9040 amoled panel driver. Signed-off-by: Donghwa Lee <[email protected]> Signed-off-by: Kyungmin Park <[email protected]> Signed-off-by: Inki Dae <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22leds: make *struct gpio_led_platform_data.leds constUwe Kleine-König1-1/+1
And fix a typo. Signed-off-by: Uwe Kleine-König <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-22leds: add driver for LM3530 ALSShreshtha Kumar Sahu3-0/+389
Simple backlight driver for National Semiconductor LM3530. Presently only manual mode is supported, PWM and ALS support to be added. Signed-off-by: Shreshtha Kumar Sahu <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Richard Purdie <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.