aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2018-03-29ath9k: fix DFS detector synchronizationTimothy Redaelli1-4/+5
some userspace programs (e.g. hostapd) need to set the regulatory domain before selecting the operating channel. Synchronize DFS detector regardless of the value of ah->curchan, to avoid situations where wireless scan can't be done on some 5GHz sub-bands, because dfs_region is constantly UNSET. Acked-by: Felix Fietkau <[email protected]> Signed-off-by: Timothy Redaelli <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-27rsi: Remove stack VLA usageTobin C. Harding1-6/+14
The use of stack Variable Length Arrays needs to be avoided, as they can be a vector for stack exhaustion, which can be both a runtime bug (kernel Oops) or a security flaw (overwriting memory beyond the stack). Also, in general, as code evolves it is easy to lose track of how big a VLA can get. Thus, we can end up having runtime failures that are hard to debug. As part of the directive[1] to remove all VLAs from the kernel, and build with -Wvla. Currently rsi code uses a VLA based on a function argument to `rsi_sdio_load_data_master_write()`. The function call chain is Both these functions rsi_sdio_reinit_device() rsi_probe() start the call chain: rsi_hal_device_init() rsi_load_fw() auto_fw_upgrade() ping_pong_write() rsi_sdio_load_data_master_write() [Without familiarity with the code] it appears that none of the 4 locks mutex rx_mutex tx_mutex tx_bus_mutex are held when `rsi_sdio_load_data_master_write()` is called. It is therefore safe to use kmalloc with GFP_KERNEL. We can avoid using the VLA by using `kmalloc()` and free'ing the memory on all exit paths. Change buffer from 'u8 array' to 'u8 *'. Call `kmalloc()` to allocate memory for the buffer. Using goto statement to call `kfree()` on all return paths. It can be expected that this patch will result in a small increase in overhead due to the use of `kmalloc()` however this code is only called on initialization (and re-initialization) so this overhead should not degrade performance. [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Tobin C. Harding <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-27mwifiex: remove warnings in mwifiex_cmd_append_11n_tlv()Ganapathi Bhat1-4/+6
Fix the following sparse warning in mwifiex_cmd_append_11n_tlv: drivers/net/wireless/marvell/mwifiex/11n.c:358:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:358:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:358:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:360:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:360:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:360:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:366:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:366:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:366:65: right side has type int drivers/net/wireless/marvell/mwifiex/11n.c:368:65: warning: invalid assignment: &= drivers/net/wireless/marvell/mwifiex/11n.c:368:65: left side has type restricted __le16 drivers/net/wireless/marvell/mwifiex/11n.c:368:65: right side has type int Fixes: 77423fa73927 ("mwifiex: fix incorrect ht capability problem") Signed-off-by: Ganapathi Bhat <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-27wireless: Use octal not symbolic permissionsJoe Perches53-486/+427
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-27Bluetooth: btrsi: rework dependenciesArnd Bergmann2-4/+4
The linkage between the bluetooth driver and the wireless driver is not defined properly, leading to build problems such as: warning: (BT_HCIRSI) selects RSI_COEX which has unmet direct dependencies (NETDEVICES && WLAN && WLAN_VENDOR_RSI && BT_HCIRSI && RSI_91X) drivers/net/wireless/rsi/rsi_91x_main.o: In function `rsi_read_pkt': (.text+0x205): undefined reference to `rsi_bt_ops' As the dependency is actually the reverse (RSI_91X uses the BT_RSI driver, not the other way round), this changes the dependency to match, and enables the bluetooth driver from the RSI_COEX symbol. Fixes: 38aa4da50483 ("Bluetooth: btrsi: add new rsi bluetooth driver") Acked-by; Marcel Holtmann <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-27Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo43-1015/+3446
ath.git patches for 4.17. Major changes: wil6210 * support multiple virtual interfaces
2018-03-26wcn36xx: Check DXE IRQ reasonRamon Fried2-7/+47
IRQ reason was not cheked for errors. Although error handing is not currently supported, it will be nice to output an error value to the log if the DMA operation failed. Signed-off-by: Ramon Fried <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26wcn36xx: calculate DXE default channel valuesRamon Fried1-5/+99
DXE channel defaults used hardcoded magic values. Added bit definitions of the control register and calculate this values in compilation for clarity. Signed-off-by: Ramon Fried <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26wcn36xx: calculate DXE control registers valuesRamon Fried2-15/+103
DXE descriptor control registers used hardcoded magic values. Added bit definitions of the control register and calculate this values in compilation for clarity. No functional changes. Signed-off-by: Ramon Fried <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26ath9k: spelling s/premble/preamble/Peter Große1-1/+1
Signed-off-by: Peter Große <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26ath9k: fix crash in spectral scanSebastian Gottschall1-5/+7
Fixes crash seen on arm smp systems (gateworks ventana imx6): Unable to handle kernel NULL pointer dereference at virtual address 00000014 pgd = 80004000 [00000014] *pgd=00000000 Internal error: Oops - BUG: 17 [#1] PREEMPT SMP ARM Modules linked in: ip6table_filter nf_conntrack_ipv6 ip6_tables nf_log_ipv6 nf_defrag_ipv6 shortcut_fe ipcomp6 xfrm_ipcomp xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_ro xfrm6_mode_beet ip6_tunnel tunnel6 mip6 ah6 esp6 xfrm_algo sit ip_tunnel tunnel4 ipv6 ath10k_pci ath10k_core ath9k ath mac80211 cfg80211 compat ath_pci ath_hal(P) caamalg authencesn authenc caamrng caamhash caam_jr caam cdc_ncm usbnet usbcore sky2 imx2_wdt CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: P 4.9.85 #19 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: bf064980 task.stack: bf07c000 PC is at relay_buf_full+0xc/0x30 LR is at _674+0x740/0xf10 [ath9k] pc : [<8018bce0>] lr : [<7f1aa604>] psr: 80000013 sp : bf07dbf0 ip : bf07dc00 fp : bf07dbfc r10: 0000003f r9 : bf130e00 r8 : 809044b0 r7 : 00000000 r6 : be67a9f0 r5 : 00000000 r4 : 809043e4 r3 : c0864c24 r2 : 00000000 r1 : 00000004 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 4e6a004a DAC: 00000055 Process ksoftirqd/0 (pid: 3, stack limit = 0xbf07c210) Stack: (0xbf07dbf0 to 0xbf07e000) dbe0: bf07dd04 bf07dc00 7f1aa604 8018bce0 dc00: 00004014 be59e010 bf07dc34 bf07dc18 7f1a7084 7f19c07c be59c010 be6470a0 dc20: 0000096c be648954 bf07dc6c bf07dc38 7f1c286c bf07dd90 bf07dc5c bf07dc48 dc40: 8029ea4c 0000003c 00000001 be59c010 00000094 00000000 00000000 00000000 dc60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dc80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dca0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dcc0: 00000000 00000000 00000000 00000000 00000000 00000000 8010ef24 00000030 dce0: be94f5e8 be6485a0 bddf0200 be59c010 be6465a0 be6415a0 bf07ddf4 bf07dd08 dd00: 7f1cf800 7f1aa55c 1fc38c4c 00000000 bf07dd58 cccccccd 66666667 be640bc0 dd20: bf07dd54 be6415a0 1fc38c4c 00000000 00000000 be59c038 be67a9c0 be59e010 dd40: be67a9f0 be647170 8090c904 be59c010 00000000 00000001 1fc38e84 00000000 dd60: be640bc0 bddf0200 00000200 00000010 0000003f 00000002 20000013 be59c010 dd80: 8092d940 bf7ca2c0 bf07ddb4 bf07dd98 1fc38c4c 2602003f 0100ff1b 80ff1b00 dda0: 00808080 00000000 00000000 80808080 80808080 80808080 80808080 00008080 ddc0: 00000000 00000000 7f1b62b8 00000002 be6470ec be6470f0 00000000 bf07de98 dde0: 8092d940 be6415a0 bf07de94 bf07ddf8 7f1d1ed8 7f1cf1fc 00000000 00000000 de00: bf7cc4c0 00000400 be6470f0 bf07de18 8015165c be59c010 8090453c 8090453c de20: bf07dec4 be6465a0 8014f614 80148884 0000619a 00000001 bf07c000 00000100 de40: bf07de78 00000001 7f327850 00000002 afb50401 bf064980 bf07de9c bf07de68 de60: bf064a00 803cc668 bf064a00 be6470b4 be6470b8 80844180 00000000 bf07de98 de80: 8092d940 bf07c000 bf07dec4 bf07de98 80124d18 7f1d1c44 80124c94 00000000 dea0: 00000006 80902098 80902080 40000006 00000100 bf07c000 bf07df24 bf07dec8 dec0: 8012501c 80124ca0 bf7cc4c0 bf064980 be95e1c0 04208040 80902d00 000061c7 dee0: 0000000a 80600b54 8092d940 808441f8 80902080 bf07dec8 bf03b200 bf07c000 df00: bf03b200 8090fe54 00000000 00000000 00000000 00000000 bf07df34 bf07df28 df20: 80125148 80124f28 bf07df5c bf07df38 8013deb4 8012511c 00000000 bf03b240 df40: bf03b200 8013dc90 00000000 00000000 bf07dfac bf07df60 8013ad40 8013dc9c df60: 70448040 00000001 00000000 bf03b200 00000000 00030003 bf07df78 bf07df78 df80: 00000000 00000000 bf07df88 bf07df88 bf03b240 8013ac48 00000000 00000000 dfa0: 00000000 bf07dfb0 80107760 8013ac54 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 8c120004 1190ad04 Backtrace: [<8018bcd4>] (relay_buf_full) from [<7f1aa604>] (_674+0x740/0xf10 [ath9k]) [<7f1aa550>] (_674 [ath9k]) from [<7f1cf800>] (_582+0x14b4/0x3708 [ath9k]) r10:be6415a0 r9:be6465a0 r8:be59c010 r7:bddf0200 r6:be6485a0 r5:be94f5e8 r4:00000030 [<7f1cf1f0>] (_582 [ath9k]) from [<7f1d1ed8>] (_735+0x2a0/0xec4 [ath9k]) r10:be6415a0 r9:8092d940 r8:bf07de98 r7:00000000 r6:be6470f0 r5:be6470ec r4:00000002 [<7f1d1c38>] (_735 [ath9k]) from [<80124d18>] (tasklet_action+0x84/0xf8) r10:bf07c000 r9:8092d940 r8:bf07de98 r7:00000000 r6:80844180 r5:be6470b8 r4:be6470b4 [<80124c94>] (tasklet_action) from [<8012501c>] (__do_softirq+0x100/0x1f4) r10:bf07c000 r9:00000100 r8:40000006 r7:80902080 r6:80902098 r5:00000006 r4:00000000 r3:80124c94 [<80124f1c>] (__do_softirq) from [<80125148>] (run_ksoftirqd+0x38/0x4c) r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:8090fe54 r5:bf03b200 r4:bf07c000 [<80125110>] (run_ksoftirqd) from [<8013deb4>] (smpboot_thread_fn+0x224/0x260) [<8013dc90>] (smpboot_thread_fn) from [<8013ad40>] (kthread+0xf8/0x100) r9:00000000 r8:00000000 r7:8013dc90 r6:bf03b200 r5:bf03b240 r4:00000000 [<8013ac48>] (kthread) from [<80107760>] (ret_from_fork+0x14/0x34) r7:00000000 r6:00000000 r5:8013ac48 r4:bf03b240 Code: e89da800 e1a0c00d e92dd800 e24cb004 (e5901014) ---[ end trace dddf11ac9111b272 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: P D 4.9.85 #19 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<8010a708>] (dump_backtrace) from [<8010a99c>] (show_stack+0x18/0x1c) r7:bf093f58 r6:20000193 r5:809168e8 r4:00000000 [<8010a984>] (show_stack) from [<802a09c4>] (dump_stack+0x94/0xa8) [<802a0930>] (dump_stack) from [<8010d184>] (handle_IPI+0xe8/0x180) r7:bf093f58 r6:00000000 r5:00000001 r4:808478c4 [<8010d09c>] (handle_IPI) from [<801013e8>] (gic_handle_irq+0x78/0x7c) r7:f4000100 r6:bf093f58 r5:f400010c r4:8090467c [<80101370>] (gic_handle_irq) from [<8010b378>] (__irq_svc+0x58/0x8c) Exception stack(0xbf093f58 to 0xbf093fa0) 3f40: bf7d62a0 00000000 3f60: 0010a5f4 80113460 bf092000 809043e4 00000002 80904434 bf092008 412fc09a 3f80: 00000000 bf093fb4 bf093fb8 bf093fa8 8010804c 80108050 60000013 ffffffff r9:bf092000 r8:bf092008 r7:bf093f8c r6:ffffffff r5:60000013 r4:80108050 [<80108014>] (arch_cpu_idle) from [<80553c2c>] (default_idle_call+0x30/0x34) [<80553bfc>] (default_idle_call) from [<80158394>] (cpu_startup_entry+0xc4/0xfc) [<801582d0>] (cpu_startup_entry) from [<8010ce40>] (secondary_start_kernel+0x168/0x174) r7:8092d2f8 r4:80913568 [<8010ccd8>] (secondary_start_kernel) from [<10101488>] (0x10101488) r5:00000055 r4:4f07806a Rebooting in 10 seconds.. Reboot failed -- System halted Signed-off-by: Sebastian Gottschall <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)Karthikeyan Periyasamy1-0/+10
When attempt to run worker (ath10k_sta_rc_update_wk) after the station object (ieee80211_sta) delete will trigger the kernel panic. This problem arise in AP + Mesh configuration, Where the current node AP VAP and neighbor node mesh VAP MAC address are same. When the current mesh node try to establish the mesh link with neighbor node, driver peer creation for the neighbor mesh node fails due to duplication MAC address. Already the AP VAP created with same MAC address. It is caused by the following scenario steps. Steps: 1. In above condition, ath10k driver sta_state callback (ath10k_sta_state) fails to do the state change for a station from IEEE80211_STA_NOTEXIST to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is called from ieee80211_add_station() to handle the new station (neighbor mesh node) request from the wpa_supplicant. 2. Concurrently ath10k receive the sta_rc_update callback notification from the mesh_neighbour_update() to handle the beacon frames of the above neighbor mesh node. since its atomic callback, ath10k driver queue the work (ath10k_sta_rc_update_wk) to handle rc update. 3. Due to driver sta_state callback fails (step 1), mac80211 free the station object. 4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access the station object which is already deleted. so it will trigger kernel panic. Added the peer exist check in sta_rc_update callback before queue the work. Kernel Panic log: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0204000 [00000000] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1 task: dcef0000 ti: d72b6000 task.ti: d72b6000 PC is at pwq_activate_delayed_work+0x10/0x40 LR is at pwq_activate_delayed_work+0xc/0x40 pc : [<c023f988>] lr : [<c023f984>] psr: 40000193 sp : d72b7f18 ip : 0000007a fp : d72b6000 r10: 00000000 r9 : dd404414 r8 : d8c31998 r7 : d72b6038 r6 : 00000004 r5 : d4907ec8 r4 : dcee1300 r3 : ffffffe0 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 595bc06a DAC: 00000015 ... Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238) Stack: (0xd72b7f18 to 0xd72b8000) 7f00: 00000001 dcee1300 7f20: 00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089 7f40: 00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000 7f60: 00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000 7f80: d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340 7fa0: c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c023f988>] (pwq_activate_delayed_work) from [<c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4) [<c02410dc>] (pwq_dec_nr_in_flight) from [<c0242790>] (worker_thread+0x228/0x360) [<c0242790>] (worker_thread) from [<c02474dc>] (kthread+0xd8/0xec) [<c02474dc>] (kthread) from [<c0208d20>] (ret_from_fork+0x14/0x34) Code: e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs Rebooting in 3 seconds.. Signed-off-by: Karthikeyan Periyasamy <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowaitCarl Huang2-9/+5
The skb may be freed in tx completion context before trace_ath10k_wmi_cmd is called. This can be easily captured when KASAN(Kernel Address Sanitizer) is enabled. The fix is to move trace_ath10k_wmi_cmd before the send operation. As the ret has no meaning in trace_ath10k_wmi_cmd then, so remove this parameter too. Signed-off-by: Carl Huang <[email protected]> Tested-by: Brian Norris <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26wcn36xx: reduce verbosity of drivers messagesRamon Fried3-9/+14
Whenever the WLAN interface is started the FW version and caps are printed. The caps now will be displayed only in debug mode. Firmware version will be displayed only once on first startup of the interface. Change-Id: I4db6ea7f384fe15eebe4c3ddb1d1ccab00094332 Signed-off-by: Ramon Fried <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26ath: fix false radar detection in JP regionSriram R1-1/+1
This fixes false radar detection (of radar type 7) in Japan region by correcting the radar pulse type to Chirp as per specification. Signed-off-by: Sriram R <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26ath10k: debugfs support to get final TPC stats for 10.4 variantsMaharaja Kennadyrajan6-15/+518
Export the final Transmit Power Control (TPC) value, which is the minimum of control power and existing TPC value to user space via a new debugfs file "tpc_stats_final" to help with debugging. It works with the new wmi cmd and event introduced in 10.4 firmware branch. WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final $ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final TPC config for channel 5180 mode 10 CTL = 0x 0 Reg. Domain = 58 Antenna Gain = 0 Reg. Max Antenna Gain = 0 Power Limit = 60 Reg. Max Power = 60 Num tx chains = 2 Num supported rates = 109 ******************* CDD POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 ******************* STBC POWER TABLE **************** No. Preamble Rate_code tpc_value1 tpc_value2 tpc_value3 0 CCK 0x40 0 0 1 CCK 0x41 0 0 [...] 107 HTCUP 0x 0 46 46 108 HTCUP 0x 0 46 46 *********************************** TXBF not supported ********************************** The existing tpc_stats debugfs file provides the dump which is minimum of target power and regulatory domain. cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats Hardware_used: QCA4019 Firmware version: firmware-5.bin_10.4-3.0-00209 Signed-off-by: Maharaja Kennadyrajan <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-26ath10k: add sta rx packet stats per tidVasanthakumar Thiagarajan5-10/+470
Added per tid sta counters for the following - Total number MSDUs received from firmware - Number of MSDUs received with errors like decryption, crc, mic ,etc. - Number of MSDUs dropped in the driver - A-MPDU/A-MSDU subframe stats - Number of MSDUS passed to mac80211 All stats other than A-MPDU stats are only for received data frames. A-MPDU stats might have stats for management frames when monitor interface is active where management frames are notified both in wmi and HTT interfaces. These per tid stats can be enabled with tid bitmask through a debugfs like below echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames The stats are read from /sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats Sample output: To enable rx stats for tid 0, 5 and 6, echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats Driver Rx pkt stats per tid, ([tid] count) ------------------------------------------ MSDUs from FW [00] 2567 [05] 3178 [06] 1089 MSDUs unchained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:chained [00] 0 [05] 0 [06] 0 MSDUs locally dropped:filtered [00] 0 [05] 0 [06] 0 MSDUs queued for mac80211 [00] 2567 [05] 3178 [06] 1089 MSDUs with error:fcs_err [00] 0 [05] 0 [06] 2 MSDUs with error:tkip_err [00] 0 [05] 0 [06] 0 MSDUs with error:crypt_err [00] 0 [05] 0 [06] 0 MSDUs with error:peer_idx_inval [00] 0 [05] 0 [06] 0 A-MPDU num subframes upto 10 [00] 2567 [05] 3178 [06] 1087 A-MPDU num subframes 11-20 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 21-30 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 31-40 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 41-50 [00] 0 [05] 0 [06] 0 A-MPDU num subframes 51-60 [00] 0 [05] 0 [06] 0 A-MPDU num subframes >60 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 1 [00] 2567 [05] 3178 [06] 1089 A-MSDU num subframes 2 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 3 [00] 0 [05] 0 [06] 0 A-MSDU num subframes 4 [00] 0 [05] 0 [06] 0 A-MSDU num subframes >4 [00] 0 [05] 0 [06] 0 Signed-off-by: Vasanthakumar Thiagarajan <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-03-25Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of ↵David S. Miller97-727/+2009
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.17 The biggest changes are the bluetooth related patches to the rsi driver. It adds a new bluetooth driver which communicates directly with the wireless driver and the interface is defined in include/net/rsi_91x.h. Major changes: wl1251 * read the MAC address from the NVS file rtlwifi * enable mac80211 fast-tx support mt76 * add capability to select tx/rx antennas mt7601 * let mac80211 validate rx CCMP Packet Number (PN) rsi * bluetooth: add new btrsi driver * btcoex support with the new btrsi driver ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-25ibmvnic: Potential NULL dereference in clean_one_tx_pool()Dan Carpenter1-1/+1
There is an && vs || typo here, which potentially leads to a NULL dereference. Fixes: e9e1e97884b7 ("ibmvnic: Update TX pool cleaning routine") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25cxgb4: support new ISSI flash partsGanesh Goudar1-0/+19
Add support for new 32MB and 64MB ISSI (Integrated Silicon Solution, Inc.) FLASH parts. Signed-off-by: Casey Leedom <[email protected]> Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25cxgb4: depend on firmware event for link statusGanesh Goudar1-2/+0
Depend on the firmware sending us link status changes, rather than assuming that the link goes down upon L1 configuration. Signed-off-by: Casey Leedom <[email protected]> Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25cxgb4: copy vlan_id in ndo_get_vf_configArjun Vynipadath1-2/+6
Copy vlan_id to get it displayed in vf info. Signed-off-by: Arjun Vynipadath <[email protected]> Signed-off-by: Casey Leedom <[email protected]> Signed-off-by: Ganesh Goudhar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25cxgb4: Setup FW queues before registering netdevArjun Vynipadath1-3/+8
When NetworkManager is enabled, there are chances that interface up is called even before probe completes. This means we have not yet allocated the FW sge queues, hence rest of ingress queue allocation wont be proper. Fix this by calling setup_fw_sge_queues() before register_netdev(). Fixes: 0fbc81b3ad51 ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's') Signed-off-by: Arjun Vynipadath <[email protected]> Signed-off-by: Casey Leedom <[email protected]> Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25net: bcmgenet: Add support for adaptive RX coalescingFlorian Fainelli2-18/+103
Unlike the moder modern SYSTEMPORT hardware, we do not have a configurable TDMA timeout, which limits us to implement adaptive RX interrupt coalescing only. We have each of our RX rings implement a bcmgenet_net_dim structure which holds an interrupt counter, number of packets, bytes, and a container for a net_dim instance. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25net: systemport: Implement adaptive interrupt coalescingFlorian Fainelli2-15/+140
Implement support for adaptive RX and TX interrupt coalescing using net_dim. We have each of our TX ring and our single RX ring implement a bcm_sysport_net_dim structure which holds an interrupt counter, number of packets, bytes, and a container for a net_dim instance. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25net: dsa: mv88e6xxx: Call the common IRQ free codeAndrew Lunn1-0/+2
When free'ing the polled IRQs, call the common irq free code. Otherwise the interrupts are left registered, and when we come to load the driver a second time, we get an Opps. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25net: dsa: mv88e6xxx: Use the DT IRQ trigger modeAndrew Lunn1-1/+1
By calling request_threaded_irq() with the flag IRQF_TRIGGER_FALLING we override the trigger mode provided in device tree. And the interrupt is actually active low, which is what all the current device tree descriptions use. Suggested-by: Uwe Kleine-König <[email protected]> Signed-off-by: Andrew Lunn <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Tested-by: Uwe Kleine-König <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25hv_netvsc: Add range checking for rx packet offset and lengthHaiyang Zhang2-2/+16
This patch adds range checking for rx packet offset and length. It may only happen if there is a host side bug. Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25hv_netvsc: Fix the return status in RX pathHaiyang Zhang3-5/+9
As defined in hyperv_net.h, the NVSP_STAT_SUCCESS is one not zero. Some functions returns 0 when it actually means NVSP_STAT_SUCCESS. This patch fixes them. In netvsc_receive(), it puts the last RNDIS packet's receive status for all packets in a vmxferpage which may contain multiple RNDIS packets. This patch puts NVSP_STAT_FAIL in the receive completion if one of the packets in a vmxferpage fails. Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25Merge branch '10GbE' of ↵David S. Miller7-121/+596
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2018-03-23 This series contains updates to ixgbe and ixgbevf only. Paul adds status register reads to reduce a potential race condition where registers can read 0xFFFFFFFF during a PCI reset, which in turn causes the driver to remove the adapter. Then fixes an assignment operation with an "OR" operation. Shannon Nelson provides several IPsec offload cleanups to ixgbe, as well as a patch to enable TSO with IPsec offload. Tony provides the much anticipated XDP support for ixgbevf. Currently, pass, drop and XDP_TX actions are supported, as well as meta data and stats reporting. Björn Töpel tweaks the page counting for XDP_REDIRECT, since a page can have its reference count decreased via the xdp_do_redirect() call. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Renamed txqs_start to start_txqsIntiyaz Basha3-3/+3
For consistency renaming txqs_start to start_txqs Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Renamed txqs_stop to stop_txqsIntiyaz Basha3-4/+4
For consistency renaming txqs_stop to stop_txqs Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Renamed txqs_wake to wake_txqsIntiyaz Basha3-5/+5
For consistency renaming txqs_wake to wake_txqs Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Function call skb_iq for deriving queue from skbIntiyaz Basha2-4/+2
Using skb_iq function for deriving queue from skb Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Removed one line function wake_qIntiyaz Basha2-23/+3
Removing one line function wake_q Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Removed one line function stop_qIntiyaz Basha2-22/+2
Removing one line function stop_q Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Removed netif_is_multiqueue checkIntiyaz Basha4-152/+64
Removing checks for netif_is_multiqueue. Configuring single queue will be a multiqueue netdev with one queues. Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Removed start_txq functionIntiyaz Basha3-36/+12
Removing start_txq function from VF and PF files Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Removed one line function stop_txqIntiyaz Basha1-10/+1
Removing one line function stop_txq Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Moved common function skb_iq to to octeon_network.hIntiyaz Basha3-20/+10
Moving common function skb_iq to to octeon_network.h Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Moved common function txqs_start to octeon_network.hIntiyaz Basha3-32/+17
Moving common function txqs_start to octeon_network.h Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Moved common function txqs_wake to octeon_network.hIntiyaz Basha3-55/+27
Moving common function txqs_wake to octeon_network.h Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25liquidio: Moved common function txqs_stop to octeon_network.hIntiyaz Basha3-32/+16
Moving common function txqs_stop to octeon_network.h Signed-off-by: Intiyaz Basha <[email protected]> Acked-by: Derek Chickles <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-23mlxsw: spectrum_span: Prevent duplicate mirrorsIdo Schimmel1-4/+24
In net commit 8175f7c4736f ("mlxsw: spectrum: Prevent duplicate mirrors") we prevented the user from mirroring more than once from a single binding point (port-direction pair). The fix was essentially reverted in a merge conflict resolution when net was merged into net-next. Restore it. Fixes: 03fe2debbb27 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-23ixgbe: tweak page counting for XDP_REDIRECTBjörn Töpel1-3/+4
The current page counting scheme assumes that the reference count cannot decrease until the received frame is sent to the upper layers of the networking stack. This assumption does not hold for the XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have its reference count decreased via the xdp_do_redirect call. To work around that, we now start off by a large page count and then don't allow a refcount less than two. Signed-off-by: Björn Töpel <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-23ixgbevf: Add XDP queue stats reportingTony Nguyen1-0/+24
XDP stats are included in TX stats, however, they are not reported in TX queue stats since they are setup on different queues. Add reporting for XDP queue stats to provide consistency between the total stats and per queue stats. Signed-off-by: Tony Nguyen <[email protected]> Acked-by: John Fastabend <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-23ixgbevf: Add support for meta dataTony Nguyen1-4/+25
Add support for XDP meta data when using build skb. Based on commit 366a88fe2f40 ("bpf, ixgbe: add meta data support") Signed-off-by: Tony Nguyen <[email protected]> Acked-by: John Fastabend <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-23ixgbevf: Delay tail write for XDP packetsTony Nguyen1-12/+18
Current XDP implementation hits the tail on every XDP_TX; change the driver to only hit the tail after packet processing is complete. Based on commit 7379f97a4fce ("ixgbe: delay tail write to every 'n' packets") Signed-off-by: Tony Nguyen <[email protected]> Acked-by: John Fastabend <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-23ixgbevf: Add support for XDP_TX actionTony Nguyen3-32/+294
This implements the XDP_TX action which is modeled on the ixgbe implementation. However instead of using CPU id to determine which XDP queue to use, this uses the received RX queue index, which is similar to i40e. Doing this eliminates the restriction that number of CPUs not exceed number of XDP queues that ixgbe has. Also, based on the number of queues available, the number of TX queues may be reduced when an XDP program is loaded in order to accommodate the XDP queues. Based largely on commit 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Signed-off-by: Tony Nguyen <[email protected]> Acked-by: John Fastabend <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-23ixgbevf: Add XDP support for pass and drop actionsTony Nguyen3-42/+178
Implement XDP_PASS and XDP_DROP based on the ixgbe implementation. Based largely on commit 924708081629 ("ixgbe: add XDP support for pass and drop actions"). Signed-off-by: Tony Nguyen <[email protected]> Acked-by: John Fastabend <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.