aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-10-21drm/amdgpu: add rlc iram and dram firmware supportLikun Gao6-8/+66
Support to load RLC iram and dram ucode when RLC firmware struct use v2.2 Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amdgpu: add function to program pbb mode for sienna cichlidLikun Gao1-0/+62
Add function for sienna_cichlid to force PBB workload mode to zero by checking whether there have SE been harvested. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.9.x
2020-10-21drm/i915/display: Unkerneldoc cnl_program_nearest_filter_coefsChris Wilson1-1/+1
The block comment for cnl_program_nearest_filter_coefs() has a wonderful diagram, but although it is marked up as kerneldoc does not use the markup for providing the function definition. drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'dev_priv' not described in 'cnl_program_nearest_filter_coefs' drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'pipe' not described in 'cnl_program_nearest_filter_coefs' drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'id' not described in 'cnl_program_nearest_filter_coefs' drivers/gpu/drm/i915/display/intel_display.c:6341: warning: Function parameter or member 'set' not described in 'cnl_program_nearest_filter_coefs' Signed-off-by: Chris Wilson <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-21drm/i915: Reject 90/270 degree rotated initial fbsVille Syrjälä1-0/+4
We don't currently handle the initial fb readout correctly for 90/270 degree rotated scanout. Reject it. Cc: [email protected] Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2020-10-21drm/i915: Clean up the irq enable/disable for ilk rpsVille Syrjälä2-17/+14
Let's unmask the PCU event irq _after_ we've set up the hardware and software to deal with the fallout. We can also drop the PCU event bit from DEIER except when we need it for rps. And on the disable side we replace the hand rolled (and unlocked) DEIER/IIR/IMR frobbing with ilk_disable_display_irq(). Ocd does require me to reorder it to be symmetric with the enable path however. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2020-10-21drm/i915: Do gen5_gt_irq_postinstall() before enabling the master interruptVille Syrjälä1-2/+2
Let's make sure the lower level interrupt bits are all lined up before we flip on the master interrupt. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2020-10-21drm/i915: Fix potential overflows in ilk ips calculationsVille Syrjälä1-5/+5
A bunch of the ips calculations require 64bit math. In particular 'corr' and 'corr2' look like they can overflow on 32bit systems. Switch to explicit u64 for those. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2020-10-21drm/i915: Read actual GPU frequency from MEMSTAT_ILK on ILKVille Syrjälä1-6/+25
There is no GEN6_RPSTAT1 on ILK. Instead of reading that let's try to get the same information from MEMSTAT_ILK. At least it seems to track MEMSWCTL frequency request perfectly on my ILK. It needs the same invert trick as the request value. We don't want to put the invert thing into intel_gpu_freq() and intel_freq_opcode() because that would incorrectly invert the min/max/etc frequencies also. One day someone might want to reverse engineer the formula for converting these numbers to Hz, but for now we'll just report them raw. Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2020-10-21drm: amdgpu: kernel-doc: update some adev parametersMauro Carvalho Chehab3-21/+20
Running "make htmldocs: produce lots of warnings on those files: ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:177: warning: Excess function parameter 'p_size' description in 'amdgpu_vram_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c:211: warning: Excess function parameter 'man' description in 'amdgpu_vram_mgr_fini' ./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini' ./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:90: warning: Excess function parameter 'p_size' description in 'amdgpu_gtt_mgr_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c:134: warning: Excess function parameter 'man' description in 'amdgpu_gtt_mgr_fini' ./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init' ./drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:675: warning: Excess function parameter 'dev' description in 'amdgpu_device_asic_init' They're related to the repacement of some parameters by adev, and due to a few renamed parameters. While here, uniform the name of the parameter for it to be the same on all functions using a pointer to struct amdgpu_device. Update the kernel-doc documentation accordingly. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amdgpu: Return boolean types instead of integer valuesSumera Priyadarsini1-2/+2
Return statements for functions returning bool should use truth and false instead of 1 and 0 respectively. Modify cik_event_interrupt.c to return false instead of 0. Issue found with Coccinelle. Signed-off-by: Sumera Priyadarsini <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amd/display: Fix the display corruption issue on Navi10Yifan Zhang1-3/+7
[Why] Screen corruption on Navi10 card [How] Set system context in DCN only on Renoir Tested-by: Matt Coffin <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Roman Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amd/pm: fix pp_dpm_fclkKenneth Feng1-0/+3
fclk value is missing in pp_dpm_fclk. add this to correctly show the current value. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21Revert drm/amdgpu: disable sienna chichlid UMC RASJohn Clements1-2/+2
This reverts commit 265c280a4807419249644156654e5c40a235ea84. Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amd/pm: fix the wrong fan speed in fan1_inputKenneth Feng1-8/+3
fix the wrong fan speed in fan1_input when the fan control mode is manual. the fan speed value is not correct when we set manual mode to fan1_enalbe - 1. since the fan speed in the metrics table always reflects the real fan speed,we can fetch the fan speed for both auto and manual mode. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amd/display: Initialize num_pkrs on VANGOGH.Bas Nieuwenhuizen1-1/+2
As far a I can tell uses a variant of DCN3xx which uses num_pkrs. If we do not initialize the variable we will set the register field to ilog2(0) = -1, though the mask will reduce that to 7. Pretty sure 7 is not the value we want here. Signed-off-by: Bas Nieuwenhuizen <[email protected]> Reviewed-by: Marek Olšák <[email protected]> Reviewed-and-Tested-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amd/pm: update driver if file for sienna cichlidLikun Gao2-3/+13
Update driver if file for sienna cichlid. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amd/pm: fix pcie information for sienna cichlidLikun Gao1-2/+2
Fix the function used for sienna cichlid to get correct PCIE information by pp_dpm_pcie. Signed-off-by: Likun Gao <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amdgpu/gmc10: remove dummy read workaround for newer chipsAlex Deucher1-2/+4
Sienna Cichlid and newer have a hw fix so no longer require the workaround. Reviewed-by: Christian König <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amd/amdgpu: enable noretry for Sienna_Cichlid/Navy_Flounder/Dimgrey_CavefishChengming Gui1-0/+3
set noretry default value to 1 for sienna_cichlid/navy_founder/dimgrey_cavefish. Signed-off-by: Chengming Gui <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amdgpu: enable VCN PG and CG for vangoghBoyuan Zhang1-2/+7
Enable VCN 3.0 PG and CG for Vangogh by setting up flags. Signed-off-by: Boyuan Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amdkfd: Use same SQ prefetch setting as amdgpuJay Cornwall1-2/+3
0 causes instruction fetch stall at cache line boundary under some conditions on Navi10. A non-zero prefetch is the preferred default in any case. Fixes soft hang in Luxmark. Signed-off-by: Jay Cornwall <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amd/swsmu: correct wrong feature bit mappingKevin Wang1-10/+17
1. when smc feature bit isn't mapped, the feature state isn't showed on sysfs node of pp_features. 2. add pp_features table title Signed-off-by: Kevin Wang <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/amdgpu: protect eeprom update from GPU resetDennis Li1-0/+8
because i2c is unstable in GPU reset, driver need protect eeprom update from GPU reset, to not miss any bad page record. Signed-off-by: Dennis Li <[email protected]> Reviewed-by: Christian König <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-21drm/i915: Restore ILK-M RPS supportVille Syrjälä1-0/+1
Restore RPS for ILK-M. We lost it when an extra HAS_RPS() check appeared in intel_rps_enable(). Unfortunaltey this just makes the performance worse on my ILK because intel_ips insists on limiting the GPU freq to the minimum. If we don't do the RPS init then intel_ips will not limit the frequency for whatever reason. Either it can't get at some required information and thus makes wrong decisions, or we mess up some weights/etc. and cause it to make the wrong decisions when RPS init has been done, or the entire thing is just wrong. Would require a bunch of reverse engineering to figure out what's going on. Cc: [email protected] Cc: Chris Wilson <[email protected]> Fixes: 9c878557b1eb ("drm/i915/gt: Use the RPM config register to determine clk frequencies") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Chris Wilson <[email protected]>
2020-10-21Merge tag 'linux-watchdog-5.10-rc1' of ↵Linus Torvalds14-48/+320
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add Toshiba Visconti watchdog driver - it87_wdt: add IT8772 + IT8784 - several fixes and improvements * tag 'linux-watchdog-5.10-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: Add Toshiba Visconti watchdog driver watchdog: bindings: Add binding documentation for Toshiba Visconti watchdog device watchdog: it87_wdt: add IT8784 ID watchdog: sp5100_tco: Enable watchdog on Family 17h devices if disabled watchdog: sp5100: Fix definition of EFCH_PM_DECODEEN3 watchdog: renesas_wdt: support handover from bootloader watchdog: imx7ulp: Watchdog should continue running for wait/stop mode watchdog: rti: Simplify with dev_err_probe() watchdog: davinci: Simplify with dev_err_probe() watchdog: cadence: Simplify with dev_err_probe() watchdog: remove unneeded inclusion of <uapi/linux/sched/types.h> watchdog: Use put_device on error watchdog: Fix memleak in watchdog_cdev_register watchdog: imx7ulp: Strictly follow the sequence for wdog operations watchdog: it87_wdt: add IT8772 ID watchdog: pcwd_usb: Avoid GFP_ATOMIC where it is not needed drivers: watchdog: rdc321x_wdt: Fix race condition bugs
2020-10-21Merge tag 'rtc-5.10' of ↵Linus Torvalds17-366/+1315
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "A new driver this cycle is making the bulk of the changes and the rx8010 driver has been rework to use the modern APIs. Summary: Subsystem: - new generic DT properties: aux-voltage-chargeable, trickle-voltage-millivolt New driver: - Microcrystal RV-3032 Drivers: - ds1307: use aux-voltage-chargeable - r9701, rx8010: modernization of the driver - rv3028: fix clock output, trickle resistor values, RAM configuration registers" * tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) rtc: r9701: set range rtc: r9701: convert to devm_rtc_allocate_device rtc: r9701: stop setting RWKCNT rtc: r9701: remove useless memset rtc: r9701: stop setting a default time rtc: r9701: remove leftover comment rtc: rv3032: Add a driver for Microcrystal RV-3032 dt-bindings: rtc: rv3032: add RV-3032 bindings dt-bindings: rtc: add trickle-voltage-millivolt rtc: rv3028: ensure ram configuration registers are saved rtc: rv3028: factorize EERD bit handling rtc: rv3028: fix trickle resistor values rtc: rv3028: fix clock output support rtc: mt6397: Remove unused member dev rtc: rv8803: simplify the return expression of rv8803_nvram_write rtc: meson: simplify the return expression of meson_vrtc_probe rtc: rx8010: rename rx8010_init_client() to rx8010_init() rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally rtc: ds1307: consider aux-voltage-chargeable rtc: ds1307: store previous charge default per chip ...
2020-10-21Merge branch 'dmi-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull dmi update from Jean Delvare. * 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: Replace HTTP links with HTTPS ones: DMI/SMBIOS SUPPORT
2020-10-21Merge branch 'i2c/for-5.10' of ↵Linus Torvalds29-908/+3831
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - if a host can be a client, too, the I2C core can now use it to emulate SMBus HostNotify support (STM32 and R-Car added this so far) - also for client mode, a testunit has been added. It can create rare situations on the bus, so host controllers can be tested - a binding has been added to mark the bus as "single-master". This allows for better timeout detections - new driver for Mellanox Bluefield - massive refactoring of the Tegra driver - EEPROMs recognized by the at24 driver can now have custom names - rest is driver updates * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits) Documentation: i2c: add testunit docs to index i2c: tegra: Improve driver module description i2c: tegra: Clean up whitespaces, newlines and indentation i2c: tegra: Clean up and improve comments i2c: tegra: Clean up printk messages i2c: tegra: Clean up variable names i2c: tegra: Improve formatting of variables i2c: tegra: Check errors for both positive and negative values i2c: tegra: Factor out hardware initialization into separate function i2c: tegra: Factor out register polling into separate function i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg() i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg() i2c: tegra: Rename wait/poll functions i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg() i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear() i2c: tegra: Remove likely/unlikely from the code i2c: tegra: Remove outdated barrier() i2c: tegra: Clean up variable types i2c: tegra: Reorder location of functions in the code i2c: tegra: Clean up probe function ...
2020-10-21Merge tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds1-4/+4
Pull ceph updates from Ilya Dryomov: - a patch that removes crush_workspace_mutex (myself). CRUSH computations are no longer serialized and can run in parallel. - a couple new filesystem client metrics for "ceph fs top" command (Xiubo Li) - a fix for a very old messenger bug that affected the filesystem, marked for stable (myself) - assorted fixups and cleanups throughout the codebase from Jeff and others. * tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client: (27 commits) libceph: clear con->out_msg on Policy::stateful_server faults libceph: format ceph_entity_addr nonces as unsigned libceph: fix ENTITY_NAME format suggestion libceph: move a dout in queue_con_delay() ceph: comment cleanups and clarifications ceph: break up send_cap_msg ceph: drop separate mdsc argument from __send_cap ceph: promote to unsigned long long before shifting ceph: don't SetPageError on readpage errors ceph: mark ceph_fmt_xattr() as printf-like for better type checking ceph: fold ceph_update_writeable_page into ceph_write_begin ceph: fold ceph_sync_writepages into writepage_nounlock ceph: fold ceph_sync_readpages into ceph_readpage ceph: don't call ceph_update_writeable_page from page_mkwrite ceph: break out writeback of incompatible snap context to separate function ceph: add a note explaining session reject error string libceph: switch to the new "osd blocklist add" command libceph, rbd, ceph: "blacklist" -> "blocklist" ceph: have ceph_writepages_start call pagevec_lookup_range_tag ceph: use kill_anon_super helper ...
2020-10-21drm: Give irq_by_busid drm_legacy_ prefixDaniel Vetter3-8/+8
It's the only ioctl handler purely for legacy drivers that didn't have this yet. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-21Merge branch 'remotes/lorenzo/pci/xilinx'Bjorn Helgaas1-4/+0
- Remove leftover bridge initialization (Lorenzo Pieralisi) * remotes/lorenzo/pci/xilinx: PCI: xilinx-cpm: Remove leftover bridge initialization
2020-10-21Merge branch 'remotes/lorenzo/pci/xgene'Bjorn Helgaas1-2/+2
- Remove unused assignment (Krzysztof Wilczyński) * remotes/lorenzo/pci/xgene: PCI: xgene: Remove unused assignment to variable msi_val
2020-10-21Merge branch 'pci/vmd'Bjorn Helgaas1-124/+182
- Add physical offset helper (Jon Derrick) - Add bus offset configuration helper (Jon Derrick) - Add IRQ domain configuration helper (Jon Derrick) - Add IRQ allocation helper (Jon Derrick) - Drop pci_save_state()/pci_restore_state() in favor of the PCI core PM (Jon Derrick) * pci/vmd: PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper
2020-10-21Merge branch 'remotes/lorenzo/pci/tegra'Bjorn Helgaas2-59/+12
- Drop return value checking for debugfs_create() calls (Greg Kroah-Hartman) - Convert debugfs "ports" file to use DEFINE_SEQ_ATTRIBUTE() (Liu Shixin) * remotes/lorenzo/pci/tegra: PCI: tegra: Convert to use DEFINE_SEQ_ATTRIBUTE macro PCI: tegra: No need to check return value of debugfs_create() functions
2020-10-21Merge branch 'remotes/lorenzo/pci/rcar'Bjorn Helgaas2-3/+8
- Document R8A774A1, R8A774B1, R8A774E1 endpoint support in DT (Lad Prabhakar) - Add R8A774A1, R8A774B1, R8A774E1 (RZ/G2M, RZ/G2N, RZ/G2H) IDs to endpoint test (Lad Prabhakar) - Add device tree support for R8A7742 (Lad Prabhakar) - Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva) * remotes/lorenzo/pci/rcar: dt-bindings: PCI: rcar: Add device tree support for r8a7742 PCI: rcar-gen2: Use fallthrough pseudo-keyword misc: pci_endpoint_test: Add Device ID for RZ/G2H PCIe controller dt-bindings: pci: rcar-pci-ep: Document r8a774e1 misc: pci_endpoint_test: Add Device ID for RZ/G2M and RZ/G2N PCIe controllers dt-bindings: pci: rcar-pci-ep: Document r8a774a1 and r8a774b1
2020-10-21Merge branch 'remotes/lorenzo/pci/qcom'Bjorn Helgaas1-0/+13
- Make sure PCIe is reset before init to work around QSDK U-Boot issue (Ansuel Smith) - Set iproc affinity mask on MSI interrupts (Mark Tomlinson) * remotes/lorenzo/pci/qcom: PCI: qcom: Make sure PCIe is reset before init for rev 2.1.0
2020-10-21Merge branch 'remotes/lorenzo/pci/mvebu'Bjorn Helgaas1-3/+0
- Remove useless msi_controller pointer allocation (Lorenzo Pieralisi) * remotes/lorenzo/pci/mvebu: PCI: mvebu: Remove useless msi_controller pointer allocation
2020-10-21Merge branch 'remotes/lorenzo/pci/mobiveil'Bjorn Helgaas1-6/+1
- Simplify mobiveil_pcie_init_irq_domain() (Liu Shixin) * remotes/lorenzo/pci/mobiveil: PCI: mobiveil: Simplify mobiveil_pcie_init_irq_domain() return expression
2020-10-21Merge branch 'remotes/lorenzo/pci/meson'Bjorn Helgaas2-2/+9
- Add pci-meson module support and enable by default on ARCH_MESON (Kevin Hilman) * remotes/lorenzo/pci/meson: PCI: meson: Build as module by default
2020-10-21Merge branch 'remotes/lorenzo/pci/loongson'Bjorn Helgaas1-6/+1
* remotes/lorenzo/pci/loongson: PCI: loongson: Simplify loongson_pci_probe() return expression
2020-10-21Merge branch 'remotes/lorenzo/pci/kirin'Bjorn Helgaas1-1/+5
- Return -EPROBE_DEFER in case the gpio isn't ready (Bean Huo) * remotes/lorenzo/pci/kirin: PCI: kirin: Return -EPROBE_DEFER in case the gpio isn't ready
2020-10-21Merge branch 'remotes/lorenzo/pci/iproc'Bjorn Helgaas3-17/+11
- Set affinity mask on MSI interrupts (Mark Tomlinson) - Simplify by using module_bcma_driver (Liu Shixin) - Fix 'using integer as NULL pointer' warning (Krzysztof Wilczyński) * remotes/lorenzo/pci/iproc: PCI: iproc: Fix using plain integer as NULL pointer in iproc_pcie_pltfm_probe PCI: iproc: Use module_bcma_driver to simplify the code PCI: iproc: Set affinity mask on MSI interrupts
2020-10-21Merge branch 'remotes/lorenzo/pci/imx6'Bjorn Helgaas1-23/+18
- Use "fallthrough" pseudo-keyword (Gustavo A. R. Silva) - Drop redundant error messages after devm_clk_get() (Anson Huang) * remotes/lorenzo/pci/imx6: PCI: imx6: Do not output error message when devm_clk_get() failed with -EPROBE_DEFER PCI: imx6: Use fallthrough pseudo-keyword
2020-10-21Merge branch 'remotes/lorenzo/pci/hv'Bjorn Helgaas1-3/+47
- Fix hibernation in case interrupts are not re-created (Dexuan Cui) * remotes/lorenzo/pci/hv: PCI: hv: Fix hibernation in case interrupts are not re-created
2020-10-21Merge branch 'remotes/lorenzo/pci/dwc'Bjorn Helgaas22-1068/+868
- Fix designware-ep Header Type check (Hou Zhiqiang) - Use DBI accessors instead of own config accessors (Rob Herring) - Allow overriding bridge pci_ops (Rob Herring) - Allow root and child buses to have different pci_ops (Rob Herring) - Add default dwc pci_ops.map_bus (Rob Herring) - Use pci_ops for root config space accessors in al, exynos, histb, keystone, kirin, meson, tegra (Rob Herring) - Remove dwc own/other config accessor ops (Rob Herring) - Use generic config accessors in dwc (Rob Herring) - Also call .add_bus() callback for root bus (Rob Herring) - Convert keystone .scan_bus() callback to use pci_ops.add_bus (Rob Herring) - Convert dwc to use pci_host_probe() (Rob Herring) - Remove dwc root_bus pointer (Rob Herring) - Remove storing of PCI resources in dwc-specific structs (Rob Herring) - Simplify config space handling (Rob Herring) - Drop keystone duplicated DT num-viewport handling (Rob Herring) - Check CONFIG_PCI_MSI in dw_pcie_msi_init() instead of duplicating it in all the drivers (Rob Herring) - Remove imx6 duplicate PCIE_LINK_WIDTH_SPEED_CONTROL definition (Rob Herring) - Add dwc num_lanes for use when it's lacking from DT (Rob Herring) - Ensure "Fast Link Mode" simulation environment setting is cleared (Rob Herring) - Drop meson duplicate number of lanes setup (Rob Herring) - Drop meson unnecessary RC config space init (Rob Herring) - Rework meson config and dwc port logic register accesses (Rob Herring) - Use common PCI register definitions in imx6 and qcom (Rob Herring) - Search for DesignWare PCIe Capability instead of hard-coding its location (Rob Herring) - Use common DesignWare register definitions in tegra (Rob Herring) - Drop keystone unused DBI2 code (Rob Herring) - Make dwc ATU accessors private (Rob Herring) - Centralize link gen setting in dwc (Rob Herring) - Set PORT_LINK_DLL_LINK_EN in common dwc setup code (Rob Herring) - Drop intel-gw unnecessary DT 'device_type' checking (Rob Herring) - Move intel-gw PCI_CAP_ID_EXP discovery to the single place it's used (Rob Herring) - Drop intel-gw unused max_width (Rob Herring) - Move N_FTS (fast training sequence) setup to common dwc setup (Rob Herring) - Convert spear13xx, tegra194 to use DBI accessors (Rob Herring) - Add multiple PFs support for DWC (Xiaowei Bao) - Add MSI-X doorbell mode for endpoint mode (Xiaowei Bao) - Update MSI/MSI-X capability management for endpoints (Xiaowei Bao) - Add layerscape ls1088a and ls2088a compatible strings (Xiaowei Bao) - Update layerscape MSI/MSI-X management (Xiaowei Bao) - Use doorbell to support MSI-X on layerscape (Xiaowei Bao) - Add layerscape endpoint mode support for ls1088a and ls2088a (Xiaowei Bao) - Add layerscape ls1088a node to DT (Xiaowei Bao) - Add Freescale/Layerscape ls1088a to endpoint test (Xiaowei Bao) - Add endpoint test driver data for Layerscape PCIe controllers (Hou Zhiqiang) - Fix 'cast truncates bits from constant value' warning (Gustavo Pimentel) - Add uniphier iATU register description (Kunihiko Hayashi) - Add common iATU register support (Kunihiko Hayashi) - Remove keystone iATU register mapping in favor of generic dwc support (Kunihiko Hayashi) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Fix MSI page leakage in suspend/resume (Jisheng Zhang) - Check whether link is up before attempting config access (best-effort fix even though it's racy) (Hou Zhiqiang) * remotes/lorenzo/pci/dwc: PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI: dwc: Fix MSI page leakage in suspend/resume PCI: dwc: Skip PCIE_MSI_INTR0* programming if MSI is disabled PCI: keystone: Remove iATU register mapping PCI: dwc: Add common iATU register support dt-bindings: PCI: uniphier-ep: Add iATU register description dt-bindings: PCI: uniphier: Add iATU register description PCI: dwc: Fix 'cast truncates bits from constant value' misc: pci_endpoint_test: Add driver data for Layerscape PCIe controllers misc: pci_endpoint_test: Add LS1088a in pci_device_id table PCI: layerscape: Add EP mode support for ls1088a and ls2088a PCI: layerscape: Modify the MSIX to the doorbell mode PCI: layerscape: Modify the way of getting capability with different PEX PCI: layerscape: Fix some format issue of the code dt-bindings: pci: layerscape-pci: Add compatible strings for ls1088a and ls2088a PCI: designware-ep: Modify MSI and MSIX CAP way of finding PCI: designware-ep: Move the function of getting MSI capability forward PCI: designware-ep: Add the doorbell mode of MSI-X in EP mode PCI: designware-ep: Add multiple PFs support for DWC PCI: dwc: Use DBI accessors PCI: dwc: Move N_FTS setup to common setup PCI: dwc/intel-gw: Drop unused max_width PCI: dwc/intel-gw: Move getting PCI_CAP_ID_EXP offset to intel_pcie_link_setup() PCI: dwc/intel-gw: Drop unnecessary checking of DT 'device_type' property PCI: dwc: Set PORT_LINK_DLL_LINK_EN in common setup code PCI: dwc: Centralize link gen setting PCI: dwc: Make ATU accessors private PCI: dwc: Remove read_dbi2 code PCI: dwc/tegra: Use common Designware port logic register definitions PCI: dwc: Remove hardcoded PCI_CAP_ID_EXP offset PCI: dwc/qcom: Use common PCI register definitions PCI: dwc/imx6: Use common PCI register definitions PCI: dwc/meson: Rework PCI config and DW port logic register accesses PCI: dwc/meson: Drop unnecessary RC config space initialization PCI: dwc/meson: Drop the duplicate number of lanes setup PCI: dwc: Ensure FAST_LINK_MODE is cleared PCI: dwc: Add a 'num_lanes' field to struct dw_pcie PCI: dwc/imx6: Remove duplicate define PCIE_LINK_WIDTH_SPEED_CONTROL PCI: dwc: Check CONFIG_PCI_MSI inside dw_pcie_msi_init() PCI: dwc/keystone: Drop duplicated 'num-viewport' PCI: dwc: Simplify config space handling PCI: dwc: Remove storing of PCI resources PCI: dwc: Remove root_bus pointer PCI: dwc: Convert to use pci_host_probe() PCI: dwc: keystone: Convert .scan_bus() callback to use add_bus PCI: Also call .add_bus() callback for root bus PCI: dwc: Use generic config accessors PCI: dwc: Remove dwc specific config accessor ops PCI: dwc: histb: Use pci_ops for root config space accessors PCI: dwc: exynos: Use pci_ops for root config space accessors PCI: dwc: kirin: Use pci_ops for root config space accessors PCI: dwc: meson: Use pci_ops for root config space accessors PCI: dwc: tegra: Use pci_ops for root config space accessors PCI: dwc: keystone: Use pci_ops for config space accessors PCI: dwc: al: Use pci_ops for child config space accessors PCI: dwc: Add a default pci_ops.map_bus for root port PCI: dwc: Allow overriding bridge pci_ops PCI: dwc: Use DBI accessors instead of own config accessors PCI: Allow root and child buses to have different pci_ops PCI: designware-ep: Fix the Header Type check
2020-10-21Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas2-7/+2
- Remove obsolete path from comment (Flavio Suligoi) - Simplify cdns_pcie_host_init_address_translation() (Qinglang Miao) * remotes/lorenzo/pci/cadence: PCI: cadence: Simplify cdns_pcie_host_init_address_translation() return expression PCI: cadence-ep: Remove obsolete path from comment
2020-10-21Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas2-64/+383
- Make PCIE_BRCMSTB depend on and default to ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for 7278, 7216, 7211, and new properties (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add control of RESCAL reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add bcm7211, bcm7216, bcm7445, bcm7278 to match list (Jim Quinlan) * remotes/lorenzo/pci/brcmstb: PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list PCI: brcmstb: Set bus max burst size by chip type PCI: brcmstb: Accommodate MSI for older chips PCI: brcmstb: Set additional internal memory DMA viewport sizes PCI: brcmstb: Add control of rescal reset PCI: brcmstb: Add bcm7278 PERST# support PCI: brcmstb: Add suspend and resume pm_ops PCI: brcmstb: Add bcm7278 register info dt-bindings: PCI: Add bindings for more Brcmstb chips PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB
2020-10-21Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas5-46/+96
- Fix s390 build error (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Export pci-bridge-emul functions for use by modules (Pali Rohár) - Make aardvark driver modular (Pali Rohár) - Move PCIe reset code to advk_pcie_train_link() (Pali Rohár) - Convert internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) * remotes/lorenzo/pci/aardvark: PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware phy: marvell: comphy: Convert internal SMCC firmware return codes to errno PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() PCI: aardvark: Implement driver 'remove' function and allow to build it as module PCI: pci-bridge-emul: Export API functions PCI: aardvark: Check for errors from pci_bridge_emul_init() call PCI: aardvark: Fix compilation on s390
2020-10-21Merge branch 'remotes/lorenzo/pci/apei'Bjorn Helgaas4-0/+398
- Add ACPI APEI notifier chain for unknown (vendor) CPER records (Shiju Jose) - Add handling of HiSilicon HIP PCIe controller errors (Yicong Yang) * remotes/lorenzo/pci/apei: PCI: hip: Add handling of HiSilicon HIP PCIe controller errors ACPI / APEI: Add a notifier chain for unknown (vendor) CPER records
2020-10-21Merge branch 'pci/misc'Bjorn Helgaas6-35/+16
- Remove unnecessary #includes (Gustavo Pimentel) - Fix intel_mid_pci.c build error when !CONFIG_ACPI (Randy Dunlap) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Simplify pci-pf-stub by using module_pci_driver() (Liu Shixin) - Print IRQ used by Link Bandwidth Notification (Dongdong Liu) - Update sysfs mmap-related #ifdef comments (Clint Sbisa) - Simplify pci_dev_reset_slot_function() (Lukas Wunner) - Use "NULL" instead of "0" to fix sparse warnings (Gustavo Pimentel) - Simplify bool comparisons (Krzysztof Wilczyński) - Drop double zeroing for P2PDMA sg_init_table() (Julia Lawall) * pci/misc: PCI: v3-semi: Remove unneeded break PCI/P2PDMA: Drop double zeroing for sg_init_table() PCI: Simplify bool comparisons PCI: endpoint: Use "NULL" instead of "0" as a NULL pointer PCI: Simplify pci_dev_reset_slot_function() PCI: Update mmap-related #ifdef comments PCI/LINK: Print IRQ number used by port PCI/IOV: Simplify pci-pf-stub with module_pci_driver() PCI: Use scnprintf(), not snprintf(), in sysfs "show" functions x86/PCI: Fix intel_mid_pci.c build error when ACPI is not enabled PCI: Remove unnecessary header includes
Powered by cgit, Gruvboxed by Blaster4385.