aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2020-11-05drm/amdgpu: Fix Arcturus fan speed reportingKent Russell1-8/+3
Arcturus doesn't have a fan. The assumption of "if the manual fan control bit isn't set, it's on automatic mode" does not hold true if the fan is missing, and results in exposing an invalid value for fan speed. The SMU metrics table accurately reflects the lack of fan and will return 0 for the fan speed. Trying to use the smu_v11_0_get_fan_speed_rpm function will return invalid data, so just stick with the SMU metrics for Arcturus Signed-off-by: Kent Russell <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-05drm/amdgpu: add missing clock gating info in amdgpu_pm_infoKevin Wang1-0/+5
add missing clock gating informations in amdgpu_pm_info 1. AMD_CG_SUPPORT_VCN_MGCG 2. AMD_CG_SUPPORT_HDP_DS 3. AMD_CG_SUPPORT_HDP_SD 4. AMD_CG_SUPPORT_IH_CG 5. AMD_CG_SUPPORT_JPEG_MGCG Signed-off-by: Kevin Wang <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-05Merge tag 'spi-fix-v5.10-rc2' of ↵Linus Torvalds3-26/+19
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of driver specific fixes that have come in since the merge window, nothing too major here but all good to have" * tag 'spi-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl-dspi: fix wrong pointer in suspend/resume spi: bcm2835: fix gpio cs level inversion spi: imx: fix runtime pm support for !CONFIG_PM
2020-11-05Merge tag 'regulator-fix-v5.10-rc2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "An addition to MAINTAINERS plus a fix for a nasty bootstrapping problem which caused problems when we need to read the voltage of a regulator that is not yet available during initialization, we were not correctly distinguishing between this case and the case where a regulator is put into a bypass mode" * tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: defer probe when trying to get voltage from unresolved supply MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator
2020-11-05Merge tag 'pm-5.10-rc3' of ↵Linus Torvalds6-50/+35
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix the device links support in runtime PM, correct mistakes in the cpuidle documentation, fix the handling of policy limits changes in the schedutil cpufreq governor, fix assorted issues in the OPP (operating performance points) framework and make one janitorial change. Specifics: - Unify the handling of managed and stateless device links in the runtime PM framework and prevent runtime PM references to devices from being leaked after device link removal (Rafael Wysocki). - Fix two mistakes in the cpuidle documentation (Julia Lawall). - Prevent the schedutil cpufreq governor from missing policy limits updates in some cases (Viresh Kumar). - Prevent static OPPs from being dropped by mistake (Viresh Kumar). - Prevent helper function in the OPP framework from returning prematurely (Viresh Kumar). - Prevent opp_table_lock from being held too long during removal of OPP tables with no more active references (Viresh Kumar). - Drop redundant semicolon from the Intel RAPL power capping driver (Tom Rix)" * tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: runtime: Resume the device earlier in __device_release_driver() PM: runtime: Drop pm_runtime_clean_up_links() PM: runtime: Drop runtime PM references to supplier on link removal powercap/intel_rapl: remove unneeded semicolon Documentation: PM: cpuidle: correct path name Documentation: PM: cpuidle: correct typo cpufreq: schedutil: Don't skip freq update if need_freq_update is set opp: Reduce the size of critical section in _opp_table_kref_release() opp: Fix early exit from dev_pm_opp_register_set_opp_helper() opp: Don't always remove static OPPs in _of_add_opp_table_v1()
2020-11-05Merge tag 'pci-v5.10-fixes-1' of ↵Linus Torvalds3-17/+23
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Fix ACS regression that broke device pass-through (Rajat Jain) - Revert DesignWare ATU memory resource to use last entry to fix Tegra194 regression (Rob Herring) - Remove duplicate mvebu resource requests to fix regression on Turris Omnia (Rob Herring) * tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: mvebu: Fix duplicate resource requests PCI: dwc: Restore ATU memory resource setup to use last entry PCI: Always enable ACS even if no ACS Capability
2020-11-05drm/kmb: Build files for KeemBay Display driverAnitha Chrisanthus4-0/+17
v2: Added Maintainer entry v3: Added one more Maintainer entry v3: drop videomode_helpers Cc: Sam Ravnborg <[email protected]> Signed-off-by: Anitha Chrisanthus <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-05drm/kmb: Mipi DSI part of the display driverAnitha Chrisanthus2-0/+1948
Initializes Mipi DSI and sets up connects to ADV bridge v2: removed license text upclassed dev_private, removed HAVE_IRQ. (Sam) v3: Squashed all 59 commits to one v4: review changes from Sam Ravnborg renamed dev_p to kmb v5: corrected spellings v6: corrected checkpatch warnings v7: review changes Sam Ravnborg and Thomas Zimmerman removed unnecessary logs and defines and ifdef codes (Sam) split dphy_init_sequence smaller (Sam) removed redundant checks in kmb_dsi (Sam) changed kmb_dsi_init to drm_bridge_connector_init and drm_connector_attach_encoder to bridge's connector (Sam) v8: call drm_bridge_attach with DRM_BRIDGE_ATTACH_NO_CONNECTOR v9: renamed kmb_dsi_hw_init to kmb_dsi_mode_set (Daniel V) v10: changes in driver to accommodate changes in DT to separate DSI entries (Sam R) added comments to clarify empty dsi host functions review changes from Sam to separate out DSI part, removed dependencies on drm side (Sam R) v11: review changes for separate msscam node (Sam R, Neil A) v12: fixed warnings Reported-by: kernel test robot <[email protected]> Signed-off-by: Anitha Chrisanthus <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-05drm/kmb: Add support for KeemBay DisplayAnitha Chrisanthus5-0/+1493
This is a basic KMS atomic modesetting display driver for KeemBay family of SOCs. Driver has no 2D or 3D graphics. It calls into the ADV bridge driver at the connector level. Single CRTC with LCD controller->mipi DSI->ADV bridge Only 1080p resolution and single plane is supported at this time. v2: moved extern to .h, removed license text use drm_dev_init, upclassed dev_private, removed HAVE_IRQ.(Sam) v3: Squashed all 59 commits to one v4: review changes from Sam Ravnborg renamed dev_p to kmb moved clocks under kmb_clock, consolidated clk initializations use drmm functions use DRM_GEM_CMA_DRIVER_OPS_VMAP v5: corrected spellings v6: corrected checkpatch warnings v7: review changes Sam Ravnborg and Thomas Zimmerman removed kmb_crtc.h kmb_crtc_cleanup (Thomas) renamed mode_set, kmb_load, inlined unload (Thomas) moved remaining logging to drm_*(Thomas) re-orged driver initialization (Thomas) moved plane_status to drm_private (Sam) removed unnecessary logs and defines and ifdef codes (Sam) call helper_check in plane_atomic_check (Sam) renamed set to get for bpp and format functions(Sam) use drm helper functions for reset, duplicate/destroy state instead of kmb functions (Sam) removed kmb_priv from kmb_plane and removed kmb_plane_state (Sam) v8: get clk_pll0 from display node in dt v9: moved csc_coef_lcd to plane.c (Daniel Vetter) call drm_atomic_helper_shutdown in remove (Daniel V) use drm_crtc_handle_vblank (Daniel V) renamed kmb_dsi_hw_init to kmb_dsi_mode_set (Daniel V) complimentary changes to device tree changes (Rob) v10: call drm_crtc_arm_vblank_event in atomic_flush (Daniel V) moved global vars to kmb_private and added locks (Daniel V) changes in driver to accommodate changes in DT to separate DSI entries (Sam R) review changes to separate mipi DSI (Sam R) v11: review changes to separate msscam (Neil A,Sam R) v12: fixed warnings Reported-by: kernel test robot <[email protected]> Signed-off-by: Anitha Chrisanthus <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-05drm/kmb: Keem Bay driver register definitionAnitha Chrisanthus1-0/+725
Register definitions for Keem Bay display driver v2: removed license text (Sam) v3: Squashed all 59 commits to one v4: review changes from Sam Ravnborg renamed dev_p to kmb v5: corrected spellings v6: corrected checkpatch warnings v7: removed redundant definitions v8: removed redundant definitions, clean up (Sam R) Signed-off-by: Anitha Chrisanthus <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-05ionic: check port ptr before useShannon Nelson1-0/+5
Check for corner case of port_init failure before using the port_info pointer. Fixes: 4d03e00a2140 ("ionic: Add initial ethtool support") Signed-off-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-05Revert "mm: mmap: fix fput in error path v2"Christian König1-3/+17
The kernel test robot is not happy with that. This reverts commit 0227da01f2559626396af5f6c7453360db86c1f6. Signed-off-by: Christian König <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/394772/
2020-11-05Revert "mm: introduce vma_set_file function v4"Christian König8-12/+19
The kernel test robot is not happy with that. This reverts commit 2b5b95b1ff3d70a95013a45e3b5b90f1daf42348. Signed-off-by: Christian König <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/394773/
2020-11-05dma-buf: Fix static checker warningJianxin Xiong1-1/+1
Here is the warning message: drivers/dma-buf/dma-buf.c:917 dma_buf_map_attachment() error: 'sg_table' dereferencing possible ERR_PTR() Fix by adding error checking before dereferencing the pointer. Fixes: ac80cd17a615 ("dma-buf: Clarify that dma-buf sg lists are page aligned") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Jianxin Xiong <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Christian König <[email protected]> Link: https://patchwork.freedesktop.org/patch/398485/
2020-11-05RDMA/srpt: Fix typo in srpt_unregister_mad_agent docstringJason Gunthorpe1-1/+1
htmldocs fails with: drivers/infiniband/ulp/srpt/ib_srpt.c:630: warning: Function parameter or member 'port_cnt' not described in 'srpt_unregister_mad_agent' Fixes: 372a1786283e ("IB/srpt: Fix memory leak in srpt_add_one") Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-11-05Merge tag 'nvme-5.10-2020-11-05' of git://git.infradead.org/nvme into block-5.10Jens Axboe5-29/+33
Pull NVMe fixes from Christoph: "nvme fixes for 5.10: - revert a nvme_queue size optimization (Keith Bush) - fabrics timeout races fixes (Chao Leng and Sagi Grimberg)" * tag 'nvme-5.10-2020-11-05' of git://git.infradead.org/nvme: nvme-tcp: avoid repeated request completion nvme-rdma: avoid repeated request completion nvme-tcp: avoid race between time out and tear down nvme-rdma: avoid race between time out and tear down nvme: introduce nvme_sync_io_queues Revert "nvme-pci: remove last_sq_tail"
2020-11-05Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-opp' and 'powercap'Rafael J. Wysocki3-5/+8
* pm-cpufreq: cpufreq: schedutil: Don't skip freq update if need_freq_update is set * pm-cpuidle: Documentation: PM: cpuidle: correct path name Documentation: PM: cpuidle: correct typo * pm-opp: opp: Reduce the size of critical section in _opp_table_kref_release() opp: Fix early exit from dev_pm_opp_register_set_opp_helper() opp: Don't always remove static OPPs in _of_add_opp_table_v1() * powercap: powercap/intel_rapl: remove unneeded semicolon
2020-11-05mm: introduce vma_set_file function v4Christian König8-19/+12
Add the new vma_set_file() function to allow changing vma->vm_file with the necessary refcount dance. v2: add more users of this. v3: add missing EXPORT_SYMBOL, rebase on mmap cleanup, add comments why we drop the reference on two occasions. v4: make it clear that changing an anonymous vma is illegal. Signed-off-by: Christian König <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> (v2) Reviewed-by: Jason Gunthorpe <[email protected]> Link: https://patchwork.freedesktop.org/patch/394773/
2020-11-05mm: mmap: fix fput in error path v2Christian König1-17/+3
Patch "495c10cc1c0c CHROMIUM: dma-buf: restore args..." adds a workaround for a bug in mmap_region. As the comment states ->mmap() callback can change vma->vm_file and so we might call fput() on the wrong file. Revert the workaround and proper fix this in mmap_region. v2: drop the extra if in dma_buf_mmap as well Signed-off-by: Christian König <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Link: https://patchwork.freedesktop.org/patch/394772/
2020-11-05drm/virtio: use kvmalloc for large allocationsSergey Senozhatsky1-2/+3
We observed that some of virtio_gpu_object_shmem_init() allocations can be rather costly - order 6 - which can be difficult to fulfill under memory pressure conditions. Switch to kvmalloc_array() in virtio_gpu_object_shmem_init() and let the kernel vmalloc the entries array. Signed-off-by: Sergey Senozhatsky <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2020-11-04r8169: work around short packet hw bug on RTL8125Heiner Kallweit1-3/+11
Network problems with RTL8125B have been reported [0] and with help from Realtek it turned out that this chip version has a hw problem with short packets (similar to RTL8168evl). Having said that activate the same workaround as for RTL8168evl. Realtek suggested to activate the workaround for RTL8125A too, even though they're not 100% sure yet which RTL8125 versions are affected. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 Fixes: 0439297be951 ("r8169: add support for RTL8125B") Reported-by: Maxim Plotnikov <[email protected]> Tested-by: Maxim Plotnikov <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-04drm/amdgpu/display: FP fixes for DCN3.x (v4)Alex Deucher5-7/+104
Add proper FP_START/END handling and adjust Makefiles per previous asics. v2: fix up harder. v3: fix clkmgr Makefile for dcn30 v4: fix old gcc handling is only required for x86 Build-tested-by: Nathan Chancellor <[email protected]> Reviewed-by: Harry Wentland <[email protected]> (v1) Reviewed-by: Nicholas Kazlauskas <[email protected]> (v1) Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: fold CONFIG_DRM_AMD_DC_DCN3* into CONFIG_DRM_AMD_DC_DCN (v3)Alex Deucher77-601/+79
Avoids confusion in configurations. v2: fix build when CONFIG_DRM_AMD_DC_DCN is disabled v3: rebase on latest code Reviewed-by: Luben Tuikov <[email protected]> (v1) Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amd/amdgpu: Enable arcturus devices to access the method ↵Ramesh Errabolu3-1/+4
kgd_gfx_v9_get_cu_occupancy that is already defined [Why] Allow user to know number of compute units (CU) that are in use at any given moment. [How] Remove the keyword static for the method kgd_gfx_v9_get_cu_occupancy Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Ramesh Errabolu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amd/display: fix psr panel lightupRoman Li1-1/+1
[Why] The change for correct asic type check caused a psr regression due to incorrect chip family id for Raven. [How] Use correct family id. Signed-off-by: Roman Li <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: cleanup debug log in amdgpu_set_pp_features()Kevin Wang1-2/+0
Signed-off-by: Kevin Wang <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amd/amdgpu: switch on/off vcn power profile modeKenneth Feng1-1/+12
switch to vcn power profile mode when a video is playing. this can optimize the power/performance when the workload is on the vcn. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: update module paramter doc of amdgpu_dpmKevin Wang1-1/+1
the vega20 isn't supported swsmu. Signed-off-by: Kevin Wang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: do not initialise global variables to 0 or NULLDeepak R Varma2-23/+23
Initializing global variable to 0 or NULL is not necessary and should be avoided. Issue reported by checkpatch script as: ERROR: do not initialise globals to 0 (or NULL). Reviewed-by: Christian König <[email protected]> Signed-off-by: Deepak R Varma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: set LDS_CONFIG=0x20 on Navy Flounder to fix a GPU hang (v2)Marek Olšák1-1/+4
v2: squash in build fix Acked-by: Alex Deucher <[email protected]> Signed-off-by: Marek Olšák <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: Change the way to determine framebuffer typeGang Ba1-13/+7
Determine FRAMEBUFFER_PUBLIC/PRIVATE only based host-accessibility, not peer-accesssibility Signed-off-by: Gang Ba <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: fix off by one in amdgpu_vm_handle_faultChristian König1-1/+1
The value is inclusive, not exclusive. Signed-off-by: Christian König <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: enable GFXOFF for dimgrey_cavefishTao Zhou2-0/+2
GFXOFF has been supported by PMFW, enable it directly in driver for dimgrey_cavefish. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: resolved ASD loading issue on siennaJohn Clements1-0/+1
updated fw header v2 parser to set asd fw memory Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: Enable FGCG for VangoghJinzhou.Su1-0/+1
Add flags AMD_CG_SUPPORT_GFX_FGCG for Vangogh Signed-off-by: Jinzhou.Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: Add Fine Grain Clock Gating for GFX10Jinzhou.Su1-0/+45
1. Add FGCG for gfx10 2. Get FGCG status for pm info debugfs Signed-off-by: Jinzhou.Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: Add GFX Fine Grain Clock Gating flagJinzhou.Su2-0/+2
Add AMD_CG_SUPPORT_GFX_FGCG for FGCG Signed-off-by: Jinzhou.Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas1-0/+2
Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-04PCI: mvebu: Fix duplicate resource requestsRob Herring1-13/+10
With commit 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated into resources when the host bridge is allocated. The resources are requested as well, but that happens a second time for the mvebu driver in mvebu_pcie_parse_request_resources(). We should only be requesting the additional resources added in mvebu_pcie_parse_request_resources(). These are not added by default because they use custom properties rather than standard DT address translation. Also, the bus ranges was also populated by default, so we can remove it from mvebu_pci_host_probe(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729 Fixes: 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Tested-by: Jan Kundrát <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Lorenzo Pieralisi <[email protected]> Cc: Thomas Petazzoni <[email protected]> Cc: Jason Cooper <[email protected]> Cc: Russell King <[email protected]>
2020-11-04PCI: dwc: Restore ATU memory resource setup to use last entryRob Herring1-2/+6
Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"), the DWC driver was setting up the last memory resource rather than the first memory resource. This doesn't matter for most platforms which only have 1 memory resource, but it broke Tegra194 which has a 2nd (prefetchable) memory region that requires an ATU entry. The first region on Tegra194 relies on the default 1:1 pass-thru of outbound transactions and doesn't need an ATU entry. Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources") Link: https://lore.kernel.org/r/[email protected] Reported-by: Vidya Sagar <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Lorenzo Pieralisi <[email protected]> Acked-by: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-11-04Merge tag 'linux-can-fixes-for-5.10-20201103' of ↵Jakub Kicinski10-55/+139
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-03 The first two patches are by Oleksij Rempel and they add a generic can-controller Device Tree yaml binding and convert the text based binding of the flexcan driver to a yaml based binding. Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN core. A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload helper. Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in hard IRQ context in can_get_echo_skb(). Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames in the __can_get_echo_skb() helper. Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in can_create_echo_skb(). Yegor Yefremov contributes 4 patches to enhance the j1939 documentation. Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind() if the netdev is down. Then there are three patches for the newly added CAN_ISOTP protocol. Geert Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds missing RX timeout handling in listen-only mode and Colin Ian King's patch decreases the generated object code by 926 bytes. Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the error path in the probe function. Navid Emamdoost's patch for the xilinx_can driver fixes the error handling in case of failing pm_runtime_get_sync(). There are two patches for the peak_usb driver. Dan Carpenter adds range checking in decode operations and Stephane Grosjean's patch fixes a timestamp wrapping problem. Stephane Grosjean's patch for th peak_canfd driver fixes echo management if loopback is on. The next three patches all target the mcp251xfd driver. The first one is by me and it increased the severity of CRC read error messages. The kernel test robot removes an unneeded semicolon and Tom Rix removes unneeded break in several switch-cases. The last 4 patches are by Joakim Zhang and target the flexcan driver, the first three fix ECC related device specific quirks for the LS1021A, LX2160A and the VF610 SoC. The last patch disable wakeup completely upon driver remove. * tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits) can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text can: j1939: j1939_sk_bind(): return failure if netdev is down can: j1939: use backquotes for code samples can: j1939: swap addr and pgn in the send example can: j1939: fix syntax and spelling can: j1939: rename jacd tool ... ==================== Link: https://lore.kernel.org/r/<[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-04spi: fsl-dspi: fix wrong pointer in suspend/resumeZhao Qiang1-6/+4
Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path"), this driver causes a "NULL pointer dereference" in dspi_suspend/resume. This is because since this commit, the drivers private data point to "dspi" instead of "ctlr", the codes in suspend and resume func were not modified correspondly. Fixes: 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path") Signed-off-by: Zhao Qiang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-11-04drm: unify formatting for color management documentationSimon Ser1-2/+2
Other properties are documented with a colon character after the property name. Consistently using a colon character allows the docs to be machine-readable. Signed-off-by: Simon Ser <[email protected]> Cc: Daniel Vetter <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-04drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINEAlex Deucher5-20/+0
No need for a separate config option at this point. Reviewed-by: Luben Tuikov <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amd/display: Add green_sardine support to DMRoman Li1-0/+12
Display Manager support for green_sardine Signed-off-by: Roman Li <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amd/display: Add green_sardine support to DCRoman Li4-0/+25
Display Core support for green_sardine Signed-off-by: Roman Li <[email protected]> Acked-by: Hersen Wu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: enable vcn support for green_sardine (v2)Thong Thai1-1/+7
Enable Green_Sardine VCN support and VCN firmware loading v2: use apu flags Signed-off-by: Thong Thai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: enable green_sardine_asd.bin loading (v2)Aaron Liu1-1/+5
This patch enable green_sardine_asd.bin loading. v2: use apu flags Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Reviewed-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)Prike Liang1-1/+5
Initialize the SDMA IP for green_sardine. v2: use apu flags Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: add gfx support for green_sardine (v2)Prike Liang1-1/+11
Enable the gfx base HW function of green_sardine. v2: use apu flags Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.