| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is a collection of three fixes for small annoyances.
Two of these are already pending in other trees, but I really don't want
to release another -rc with these issues pending, so I picked up the
patches for these things directly. We'll end up with duplicate commits
eventually, I prefer that over having these issues pending.
The third one is just me getting rid of another BUG_ON() just because it
was reported and I dislike those things so much.
* merge 'hot-fixes' branch:
ida: don't use BUG_ON() for debugging
drm/aperture: Run fbdev removal before internal helpers
ptrace: fix clearing of JOBCTL_TRACED in ptrace_unfreeze_traced()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"One core fix for DMA_INTERRUPT and rest driver fixes.
Core:
- Revert verification of DMA_INTERRUPT capability as that was
incorrect
Bunch of driver fixes for:
- ti: refcount and put_device leak
- qcom_bam: runtime pm overflow
- idxd: force wq context cleanup and call idxd_enable_system_pasid()
on success
- dw-axi-dmac: RMW on channel suspend register
- imx-sdma: restart cyclic channel when enabled
- at_xdma: error handling for at_xdmac_alloc_desc
- pl330: lockdep warning
- lgm: error handling path in probe
- allwinner: Fix min/max typo in binding"
* tag 'dmaengine-fix-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dt-bindings: dma: allwinner,sun50i-a64-dma: Fix min/max typo
dmaengine: lgm: Fix an error handling path in intel_ldma_probe()
dmaengine: pl330: Fix lockdep warning about non-static key
dmaengine: idxd: Only call idxd_enable_system_pasid() if succeeded in enabling SVA feature
dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly
dmaengine: imx-sdma: only restart cyclic channel when enabled
dmaengine: dw-axi-dmac: Fix RMW on channel suspend register
dmaengine: idxd: force wq context cleanup on device disable path
dmaengine: qcom: bam_dma: fix runtime PM underflow
dmaengine: imx-sdma: Allow imx8m for imx7 FW revs
dmaengine: Revert "dmaengine: add verification of DMA_INTERRUPT capability for dmatest"
dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate
dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for a reported problem that showed
up in 5.19-rc1 in the wlan-ng driver. It has been in linux-next for a
week with no reported problems"
* tag 'staging-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging/wlan-ng: get the correct struct hfa384x in work callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are four small char/misc driver fixes for 5.19-rc6 to resolve
some reported issues. They only affect two drivers:
- rtsx_usb: fix for of-reported DMA warning error, the driver was
handling memory buffers in odd ways, it has now been fixed up to be
much simpler and correct by Shuah.
- at25 eeprom driver bugfix for reported problem
All of these have been in linux-next for a week with no reported
problems"
* tag 'char-misc-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx_usb: set return value in rsp_buf alloc err path
misc: rtsx_usb: use separate command and response buffers
misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer
eeprom: at25: Rework buggy read splitting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Gracefully handle failure to request MMIO resources in the GICv3
driver
- Make a static key static in the Apple AIC driver
- Fix the Xilinx intc driver dependency on OF_ADDRESS
* tag 'irq_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/apple-aic: Make symbol 'use_fast_ipi' static
irqchip/xilinx: Add explicit dependency on OF_ADDRESS
irqchip/gicv3: Handle resource request failure consistently
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two I2C driver bugfixes preventing resource leaks"
* tag 'i2c-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Unregister the clk notifier in error path
i2c: piix4: Fix a memory leak in the EFCH MMIO support
|
|
Always run fbdev removal first to remove simpledrm via sysfb_disable().
This clears the internal state.
The later call to drm_aperture_detach_drivers() then does nothing.
Otherwise, with drm_aperture_detach_drivers() running first, the call to
sysfb_disable() uses inconsistent state.
Example backtrace show below:
BUG: KASAN: use-after-free in device_del+0x79/0x5f0
Read of size 8 at addr ffff888108185050 by task systemd-udevd/311
CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G E 5.19.0-rc2-1-default+ #1689
Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011
Call Trace:
device_del+0x79/0x5f0
platform_device_del.part.0+0x19/0xe0
platform_device_unregister+0x1c/0x30
sysfb_disable+0x2d/0x70
remove_conflicting_framebuffers+0x1c/0xf0
remove_conflicting_pci_framebuffers+0x130/0x1a0
drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0
mgag200_pci_probe+0x2d/0x140 [mgag200]
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 873eb3b11860 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Changcheng Deng <deng.changcheng@zte.com.cn>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two recent regressions related to CPPC support.
Specifics:
- Prevent _CPC from being used if the platform firmware does not
confirm CPPC v2 support via _OSC (Mario Limonciello)
- Allow systems with X86_FEATURE_CPPC set to use _CPC even if CPPC
support cannot be agreed on via _OSC (Mario Limonciello)"
* tag 'acpi-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in a devfreq driver and a runtime
PM framework issue that may cause a supplier device to be suspended
before its consumer.
Specifics:
- Fix NULL pointer dereference related to printing a diagnostic
message in the exynos-bus devfreq driver (Christian Marangi)
- Fix race condition in the runtime PM framework which in some cases
may cause a supplier device to be suspended when its consumer is
still active (Rafael Wysocki)"
* tag 'pm-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: exynos-bus: Fix NULL pointer dereference
PM: runtime: Fix supplier device management during consumer probe
PM: runtime: Redefine pm_runtime_release_supplier()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Vishal Verma:
- Update MAINTAINERS for Ben's email
- Fix cleanup of port devices on failure to probe driver
- Fix endianness in get/set LSA mailbox command structures
- Fix memregion_free() fallback definition
- Fix missing variable payload checks in CXL cmd size validation
* tag 'cxl-fixes-for-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/mbox: Fix missing variable payload checks in cmd size validation
memregion: Fix memregion_free() fallback definition
cxl/mbox: Use __le32 in get,set_lsa mailbox structures
cxl/core: Use is_endpoint_decoder
cxl: Fix cleanup of port devices on failure to probe driver.
MAINTAINERS: Update Ben's email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- fix device setup failures in the Intel VT-d driver when the PASID
table is shared
- fix Intel VT-d device hot-add failure due to wrong device notifier
order
- remove the old IOMMU mailing list from the MAINTAINERS file now that
it has been retired
* tag 'iommu-fixes-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
MAINTAINERS: Remove iommu@lists.linux-foundation.org
iommu/vt-d: Fix RID2PASID setup/teardown failure
iommu/vt-d: Fix PCI bus rescan device hot add
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a build error in gpio-vf610
- fix a null-pointer dereference in the GPIO character device code
* tag 'gpio-fixes-for-v5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: fix null pointer dereference in linereq_free()
gpio: vf610: fix compilation error
|
|
Merge a runtime PM framework cleanup and fix related to device links.
* pm-core:
PM: runtime: Fix supplier device management during consumer probe
PM: runtime: Redefine pm_runtime_release_supplier()
|
|
Pull block fixes from Jens Axboe:
"NVMe pull request with another id quirk addition, and a tracing fix"
* tag 'block-5.19-2022-07-08' of git://git.kernel.dk/linux-block:
nvme: use struct group for generic command dwords
nvme-pci: phison e16 has bogus namespace ids
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- fbcon now prevents switching to screen resolutions which are smaller
than the font size, and prevents enabling a font which is bigger than
the current screen resolution. This fixes vmalloc-out-of-bounds
accesses found by KASAN.
- Guiling Deng fixed a bug where the centered fbdev logo wasn't
displayed correctly if the screen size matched the logo size.
- Hsin-Yi Wang provided a patch to include errno.h to fix build when
CONFIG_OF isn't enabled.
* tag 'for-5.19/fbdev-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbcon: Use fbcon_info_from_console() in fbcon_modechange_possible()
fbmem: Check virtual screen sizes in fb_set_var()
fbcon: Prevent that screen size is smaller than font size
fbcon: Disallow setting font bigger than screen size
video: of_display_timing.h: include errno.h
fbdev: fbmem: Fix logo center image dx issue
|
|
This patch ensures that the clock notifier is unregistered
when driver probe is returning error.
Fixes: df8eb5691c48 ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Satish Nagireddy <satish.nagireddy@getcruise.com>
Tested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
Fix exynos-bus NULL pointer dereference by correctly using the local
generated freq_table to output the debug values instead of using the
profile freq_table that is not used in the driver.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b5d281f6c16d ("PM / devfreq: Rework freq_table to be local to devfreq struct")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, netfilter, can, and bluetooth.
Current release - regressions:
- bluetooth: fix deadlock on hci_power_on_sync
Previous releases - regressions:
- sched: act_police: allow 'continue' action offload
- eth: usbnet: fix memory leak in error case
- eth: ibmvnic: properly dispose of all skbs during a failover
Previous releases - always broken:
- bpf:
- fix insufficient bounds propagation from
adjust_scalar_min_max_vals
- clear page contiguity bit when unmapping pool
- netfilter: nft_set_pipapo: release elements in clone from
abort path
- mptcp: netlink: issue MP_PRIO signals from userspace PMs
- can:
- rcar_canfd: fix data transmission failed on R-Car V3U
- gs_usb: gs_usb_open/close(): fix memory leak
Misc:
- add Wenjia as SMC maintainer"
* tag 'net-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
wireguard: Kconfig: select CRYPTO_CHACHA_S390
crypto: s390 - do not depend on CRYPTO_HW for SIMD implementations
wireguard: selftests: use microvm on x86
wireguard: selftests: always call kernel makefile
wireguard: selftests: use virt machine on m68k
wireguard: selftests: set fake real time in init
r8169: fix accessing unset transport header
net: rose: fix UAF bug caused by rose_t0timer_expiry
usbnet: fix memory leak in error case
Revert "tls: rx: move counting TlsDecryptErrors for sync"
mptcp: update MIB_RMSUBFLOW in cmd_sf_destroy
mptcp: fix local endpoint accounting
selftests: mptcp: userspace PM support for MP_PRIO signals
mptcp: netlink: issue MP_PRIO signals from userspace PMs
mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
mptcp: Avoid acquiring PM lock for subflow priority changes
mptcp: fix locking in mptcp_nl_cmd_sf_destroy()
net/mlx5e: Fix matchall police parameters validation
net/sched: act_police: allow 'continue' action offload
net: lan966x: hardcode the number of external ports
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Tag Intel pin control as supported in MAINTAINERS
- Fix a NULL pointer exception in the Aspeed driver
- Correct some NAND functions in the Sunxi A83T driver
- Use the right offset for some Sunxi pins
- Fix a zero base offset in the Freescale (NXP) i.MX93
- Fix the IRQ support in the STM32 driver
* tag 'pinctrl-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: fix optional IRQ support to gpios
pinctrl: imx: Add the zero base flag for imx93
pinctrl: sunxi: sunxi_pconf_set: use correct offset
pinctrl: sunxi: a83t: Fix NAND function name for some pins
pinctrl: aspeed: Fix potential NULL dereference in aspeed_pinmux_set_mux()
MAINTAINERS: Update Intel pin control to Supported
|
|
Fix a kernel NULL pointer dereference reported by gpio kselftests.
linereq_free() can be called as part of the cleanup of a failed request,
at which time the desc for a line may not have been determined, so it
is unsafe to dereference without a check.
Add a check prior to dereferencing the line desc.
Fixes: 2068339a6c35 ("gpiolib: cdev: Add hardware timestamp clock type")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Use the fbcon_info_from_console() wrapper which was added to kernel
v5.19 with commit 409d6c95f9c6 ("fbcon: Introduce wrapper for console->fb_info lookup").
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
|
|
Verify that the fbdev or drm driver correctly adjusted the virtual
screen sizes. On failure report the failing driver and reject the screen
size change.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
|
|
We need to prevent that users configure a screen size which is smaller than the
currently selected font size. Otherwise rendering chars on the screen will
access memory outside the graphics memory region.
This patch adds a new function fbcon_modechange_possible() which
implements this check and which later may be extended with other checks
if necessary. The new function is called from the FBIOPUT_VSCREENINFO
ioctl handler in fbmem.c, which will return -EINVAL if userspace asked
for a too small screen size.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v5.4+
|
|
Prevent that users set a font size which is bigger than the physical screen.
It's unlikely this may happen (because screens are usually much larger than the
fonts and each font char is limited to 32x32 pixels), but it may happen on
smaller screens/LCD displays.
Signed-off-by: Helge Deller <deller@gmx.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v4.14+
|
|
Select the new implementation of CHACHA20 for S390 when available.
It is faster than the generic software implementation, but also prevents
some linker errors in certain situations.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Various accelerated software implementation Kconfig values for S390 were
mistakenly placed into drivers/crypto/Kconfig, even though they're
mainly just SIMD code and live in arch/s390/crypto/ like usual. This
gives them the very unusual dependency on CRYPTO_HW, which leads to
problems elsewhere.
This patch fixes the issue by moving the Kconfig values for non-hardware
drivers into the usual place in crypto/Kconfig.
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
66e4c8d95008 ("net: warn if transport header was not set") added
a check that triggers a warning in r8169, see [0].
The commit referenced in the Fixes tag refers to the change from
which the patch applies cleanly, there's nothing wrong with this
commit. It seems the actual issue (not bug, because the warning
is harmless here) was introduced with bdfa4ed68187
("r8169: use Giant Send").
[0] https://bugzilla.kernel.org/show_bug.cgi?id=216157
Fixes: 8d520b4de3ed ("r8169: work around RTL8125 UDP hw bug")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Tested-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
usbnet_write_cmd_async() mixed up which buffers
need to be freed in which error case.
v2: add Fixes tag
v3: fix uninitialized buf pointer
Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This will allow the trace event to know the full size of the data
intended to be copied and silence read overflow checks.
Reported-by: John Garry <john.garry@huawei.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Pull OpenRISC fixes from Stafford Horne:
"Fixups for OpenRISC found during recent testing:
- An OpenRISC irqchip fix to stop acking level interrupts which was
causing issues on SMP platforms
- A comment typo fix in our unwinder code"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: unwinder: Fix grammar issue in comment
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zygnier:
- Gracefully handle failure to request MMIO resources in the GICv3 driver
- Make a static key static in the Apple AIC driver
- Fix the Xilinx intc driver dependency on OF_ADDRESS
Link: https://lore.kernel.org/all/20220701133531.1545319-1-maz@kernel.org
|
|
Add the quirk.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216049
Reported-by: Chris Egolf <cegolf@ugholf.net>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Image.dx gets wrong value because of missing '()'.
If xres == logo->width and n == 1, image.dx = -16.
Signed-off-by: Guiling Deng <greens9@163.com>
Fixes: 3d8b1933eb1c ("fbdev: fbmem: add config option to center the bootup logo")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Referenced commit prepared the code for upcoming extension that allows mlx5
to offload police action attached to flower classifier. However, with
regard to existing matchall classifier offload validation should be
reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police
action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police
action and extend scan_tc_matchall_fdb_actions() to only allow such actions
with matchall classifier.
Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The IOMMU driver shares the pasid table for PCI alias devices. When the
RID2PASID entry of the shared pasid table has been filled by the first
device, the subsequent device will encounter the "DMAR: Setup RID2PASID
failed" failure as the pasid entry has already been marked as present.
As the result, the IOMMU probing process will be aborted.
On the contrary, when any alias device is hot-removed from the system,
for example, by writing to /sys/bus/pci/devices/.../remove, the shared
RID2PASID will be cleared without any notifications to other devices.
As the result, any DMAs from those rest devices are blocked.
Sharing pasid table among PCI alias devices could save two memory pages
for devices underneath the PCIe-to-PCI bridges. Anyway, considering that
those devices are rare on modern platforms that support VT-d in scalable
mode and the saved memory is negligible, it's reasonable to remove this
part of immature code to make the driver feasible and stable.
Fixes: ef848b7e5a6a0 ("iommu/vt-d: Setup pasid entry for RID2PASID support")
Reported-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reported-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Ethan Zhao <haifeng.zhao@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220623065720.727849-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220625133430.2200315-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Notifier calling chain uses priority to determine the execution
order of the notifiers or listeners registered to the chain.
PCI bus device hot add utilizes the notification mechanism.
The current code sets low priority (INT_MIN) to Intel
dmar_pci_bus_notifier and postpones DMAR decoding after adding
new device into IOMMU. The result is that struct device pointer
cannot be found in DRHD search for the new device's DMAR/IOMMU.
Subsequently, the device is put under the "catch-all" IOMMU
instead of the correct one. This could cause system hang when
device TLB invalidation is sent to the wrong IOMMU. Invalidation
timeout error and hard lockup have been observed and data
inconsistency/crush may occur as well.
This patch fixes the issue by setting a positive priority(1) for
dmar_pci_bus_notifier while the priority of IOMMU bus notifier
uses the default value(0), therefore DMAR decoding will be in
advance of DRHD search for a new device to find the correct IOMMU.
Following is a 2-step example that triggers the bug by simulating
PCI device hot add behavior in Intel Sapphire Rapids server.
echo 1 > /sys/bus/pci/devices/0000:6a:01.0/remove
echo 1 > /sys/bus/pci/rescan
Fixes: 59ce0515cdaf ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope")
Cc: stable@vger.kernel.org # v3.15+
Reported-by: Zhang, Bernice <bernice.zhang@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Yian Chen <yian.chen@intel.com>
Link: https://lore.kernel.org/r/20220521002115.1624069-1-yian.chen@intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
ldma_clk_disable() calls both:
clk_disable_unprepare(d->core_clk);
reset_control_assert(d->rst);
So, should devm_reset_control_get_optional() fail, core_clk should not
be prepare_enable'd before it, otherwise it will never be
disable_unprepare'd.
Reorder the code to handle the error handling path as expected.
Fixes: 32d31c79a1a4 ("dmaengine: Add Intel LGM SoC DMA support.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/18504549bc4d2b62a72a02cb22a2e4d8e6a58720.1653241224.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The DEFINE_SPINLOCK() macro shouldn't be used for dynamically allocated
spinlocks. The lockdep warns about this and disables locking validator.
Fix the warning by making lock static.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Hardware name: Radxa ROCK Pi 4C (DT)
Call trace:
dump_backtrace.part.0+0xcc/0xe0
show_stack+0x18/0x6c
dump_stack_lvl+0x8c/0xb8
dump_stack+0x18/0x34
register_lock_class+0x4a8/0x4cc
__lock_acquire+0x78/0x20cc
lock_acquire.part.0+0xe0/0x230
lock_acquire+0x68/0x84
_raw_spin_lock_irqsave+0x84/0xc4
add_desc+0x44/0xc0
pl330_get_desc+0x15c/0x1d0
pl330_prep_dma_cyclic+0x100/0x270
snd_dmaengine_pcm_trigger+0xec/0x1c0
dmaengine_pcm_trigger+0x18/0x24
...
Fixes: e588710311ee ("dmaengine: pl330: fix descriptor allocation fail")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20220520181432.149904-1-dmitry.osipenko@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of counting the child nodes in the device tree, hardcode the
number of ports in the driver itself. The counting won't work at all
if an ethernet port is marked as disabled, e.g. because it is not
connected on the board at all.
It turns out that the LAN9662 and LAN9668 use the same switching IP
with the same synthesis parameters. The only difference is that the
output ports are not connected. Thus, we can just hardcode the
number of physical ports to 8.
Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220704153654.1167886-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
commit 72f2ecb7ece7 ("ACPI: bus: Set CPPC _OSC bits for all and
when CPPC_LIB is supported") added support for claiming to
support CPPC in _OSC on non-Intel platforms.
This unfortunately caused a regression on a vartiety of AMD
platforms in the field because a number of AMD platforms don't set
the `_OSC` bit 5 or 6 to indicate CPPC or CPPC v2 support.
As these AMD platforms already claim CPPC support via a dedicated
MSR from `X86_FEATURE_CPPC`, use this enable this feature rather
than requiring the `_OSC` on platforms with a dedicated MSR.
If there is additional breakage on the shared memory designs also
missing this _OSC, additional follow up changes may be needed.
Fixes: 72f2ecb7ece7 ("Set CPPC _OSC bits for all and when CPPC_LIB is supported")
Reported-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Previously the kernel used to ignore whether the firmware masked CPPC
or CPPCv2 and would just pretend that it worked.
When support for the USB4 bit in _OSC was introduced from commit
9e1f561afb ("ACPI: Execute platform _OSC also with query bit clear")
the kernel began to look at the return when the query bit was clear.
This caused regressions that were misdiagnosed and attempted to be solved
as part of commit 2ca8e6285250 ("Revert "ACPI: Pass the same capabilities
to the _OSC regardless of the query flag""). This caused a different
regression where non-Intel systems weren't able to negotiate _OSC
properly.
This was reverted in commit 2ca8e6285250 ("Revert "ACPI: Pass the same
capabilities to the _OSC regardless of the query flag"") and attempted to
be fixed by commit c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not
supported by firmware") but the regression still returned.
These systems with the regression only load support for CPPC from an SSDT
dynamically when _OSC reports CPPC v2. Avoid the problem by not letting
CPPC satisfy the requirement in `acpi_cppc_processor_probe`.
Reported-by: CUI Hao <cuihao.leo@gmail.com>
Reported-by: maxim.novozhilov@gmail.com
Reported-by: lethe.tree@protonmail.com
Reported-by: garystephenwright@gmail.com
Reported-by: galaxyking0419@gmail.com
Fixes: c42fa24b4475 ("ACPI: bus: Avoid using CPPC if not supported by firmware")
Fixes: 2ca8e6285250 ("Revert "ACPI Pass the same capabilities to the _OSC regardless of the query flag"")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213023
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2075387
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: CUI Hao <cuihao.leo@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen security fixes from Juergen Gross:
- XSA-403 (4 patches for blkfront and netfront drivers):
Linux Block and Network PV device frontends don't zero memory regions
before sharing them with the backend (CVE-2022-26365,
CVE-2022-33740). Additionally the granularity of the grant table
doesn't allow sharing less than a 4K page, leading to unrelated data
residing in the same 4K page as data shared with a backend being
accessible by such backend (CVE-2022-33741, CVE-2022-33742).
- XSA-405 (1 patch for netfront driver, only 5.10 and newer):
While adding logic to support XDP (eXpress Data Path), a code label
was moved in a way allowing for SKBs having references (pointers)
retained for further processing to nevertheless be freed.
- XSA-406 (1 patch for Arm specific dom0 code):
When mapping pages of guests on Arm, dom0 is using an rbtree to keep
track of the foreign mappings.
Updating of that rbtree is not always done completely with the
related lock held, resulting in a small race window, which can be
used by unprivileged guests via PV devices to cause inconsistencies
of the rbtree. These inconsistencies can lead to Denial of Service
(DoS) of dom0, e.g. by causing crashes or the inability to perform
further mappings of other guests' memory pages.
* tag 'xsa-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/arm: Fix race in RB-tree based P2M accounting
xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses()
xen/blkfront: force data bouncing when backend is untrusted
xen/netfront: force data bouncing when backend is untrusted
xen/netfront: fix leaking data in shared pages
xen/blkfront: fix leaking data in shared pages
|
|
Fix compilation error by explicitly adding the missing include.
drivers/gpio/gpio-vf610.c: In function ‘vf610_gpio_direction_input’:
drivers/gpio/gpio-vf610.c:120:9: error: implicit declaration of function ‘pinctrl_gpio_direction_input’; did you mean ‘vf610_gpio_direction_input’? [-Werror=implicit-function-declaration]
120 | return pinctrl_gpio_direction_input(chip->base + gpio);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
| vf610_gpio_direction_input
Fixes: 30a35c07d9e9 ("gpio: vf610: drop the SOC_VF610 dependency for GPIO_VF610")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
enabling SVA feature
On a Sapphire Rapids system if boot without intel_iommu=on, the IDXD
driver will crash during probe in iommu_sva_bind_device().
[ 21.423729] BUG: kernel NULL pointer dereference, address: 0000000000000038
[ 21.445108] #PF: supervisor read access in kernel mode
[ 21.450912] #PF: error_code(0x0000) - not-present page
[ 21.456706] PGD 0
[ 21.459047] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 21.464004] CPU: 0 PID: 1420 Comm: kworker/0:3 Not tainted 5.19.0-0.rc3.27.eln120.x86_64 #1
[ 21.464011] Hardware name: Intel Corporation EAGLESTREAM/EAGLESTREAM, BIOS EGSDCRB1.SYS.0067.D12.2110190954 10/19/2021
[ 21.464015] Workqueue: events work_for_cpu_fn
[ 21.464030] RIP: 0010:iommu_sva_bind_device+0x1d/0xe0
[ 21.464046] Code: c3 cc 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 49 89 d6 41 55 41 54 55 53 48 83 ec 08 48 8b 87 d8 02 00 00 <48> 8b 40 38 48 8b 50 10 48 83 7a 70 00 48 89 14 24 0f 84 91 00 00
[ 21.464050] RSP: 0018:ff7245d9096b7db8 EFLAGS: 00010296
[ 21.464054] RAX: 0000000000000000 RBX: ff1eadeec8a51000 RCX: 0000000000000000
[ 21.464058] RDX: ff7245d9096b7e24 RSI: 0000000000000000 RDI: ff1eadeec8a510d0
[ 21.464060] RBP: ff1eadeec8a51000 R08: ffffffffb1a12300 R09: ff1eadffbfce25b4
[ 21.464062] R10: ffffffffffffffff R11: 0000000000000038 R12: ffffffffc09f8000
[ 21.464065] R13: ff1eadeec8a510d0 R14: ff7245d9096b7e24 R15: ff1eaddf54429000
[ 21.464067] FS: 0000000000000000(0000) GS:ff1eadee7f600000(0000) knlGS:0000000000000000
[ 21.464070] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 21.464072] CR2: 0000000000000038 CR3: 00000008c0e10006 CR4: 0000000000771ef0
[ 21.464074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 21.464076] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 21.464078] PKRU: 55555554
[ 21.464079] Call Trace:
[ 21.464083] <TASK>
[ 21.464092] idxd_pci_probe+0x259/0x1070 [idxd]
[ 21.464121] local_pci_probe+0x3e/0x80
[ 21.464132] work_for_cpu_fn+0x13/0x20
[ 21.464136] process_one_work+0x1c4/0x380
[ 21.464143] worker_thread+0x1ab/0x380
[ 21.464147] ? _raw_spin_lock_irqsave+0x23/0x50
[ 21.464158] ? process_one_work+0x380/0x380
[ 21.464161] kthread+0xe6/0x110
[ 21.464168] ? kthread_complete_and_exit+0x20/0x20
[ 21.464172] ret_from_fork+0x1f/0x30
iommu_sva_bind_device() requires SVA has been enabled successfully on
the IDXD device before it's called. Otherwise, iommu_sva_bind_device()
will access a NULL pointer. If Intel IOMMU is disabled, SVA cannot be
enabled and thus idxd_enable_system_pasid() and iommu_sva_bind_device()
should not be called.
Fixes: 42a1b73852c4 ("dmaengine: idxd: Separate user and kernel pasid enabling")
Cc: Vinod Koul <vkoul@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/dmaengine/20220623170232.6whonfjuh3m5vcoy@cantor/
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220626051648.14249-1-jsnitsel@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
It seems that it is valid to have less than the requested number of
descriptors. But what is not valid and leads to subsequent errors is to
have zero descriptors. In that case, abort the probing.
Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220526135111.1470926-1-michael@walle.cc
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
can 2022-07-04
The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and
converts a costly synchronize_rcu() to call_rcu() to fix a performance
regression.
Srinivas Neeli's patch for the xilinx_can driver drops the brp limit
down to 1, as only the pre-production silicon have an issue with a brp
of 1.
The next patch is by Duy Nguyen and fixes the data transmission on
R-Car V3U SoCs in the rcar_canfd driver.
Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver.
Liang He's patch removes an extra of_node_get() in the grcan driver.
The next 2 patches are by me, target the m_can driver and fix the
timestamp handling used for peripheral devices like the tcan4x5x.
Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and
fixes CAN clock and bit timing related issues.
The remaining 5 patches target the mcp251xfd driver. Thomas Kopp
contributes 2 patches to improve the workaround for broken CRC when
reading the TBC register. 3 patches by me add a missing
hrtimer_cancel() during the ndo_stop() callback, and fix the reading
of the Device ID register.
* tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion
can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id
can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel()
can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register
can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd
can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits
can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info
can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits
can: m_can: m_can_chip_config(): actually enable internal timestamping
can: grcan: grcan_probe(): remove extra of_node_get()
can: gs_usb: gs_usb_open/close(): fix memory leak
can: rcar_canfd: Fix data transmission failed on R-Car V3U
Revert "can: xilinx_can: Limit CANFD brp to 2"
can: bcm: use call_rcu() instead of costly synchronize_rcu()
====================
Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of minor patches for Arm DTS files and soc specific
drivers:
- More reference counting bug fixes for DT nodes, and other trivial
code fixes
- Multiple code fixes for the Arm SCMI firmware driver to improve
compatibility with firmware implementations.
- A patch series for at91 to address power management issues from
using the wrong DT compatible properties.
- A series of patches to fix pad settings for NXP imx8mp to leave the
configuration untouched from the boot loader
- Additional DT fixes for qualcomm and NXP platforms
- A boot time fix for stm32mp15 DT
- Konrad Dybcio becomes an additional reviewer for the Qualcomm
platforms"
* tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
soc: qcom: smem: use correct format characters
ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
ARM: dts: stm32: fix pwr regulators references to use scmi
soc: ixp4xx/npe: Fix unused match warning
ARM: at91: pm: Mark at91_pm_secure_init as __init
ARM: at91: fix soc detection for SAM9X60 SiPs
ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatible for sama5d2's rtc
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
...
|
|
When compiling with -Wformat, clang emits the following warnings:
drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "bad host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "duplicate host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct one and change type of
remote_host to "u16" to match with other types.
Signed-off-by: Bill Wendling <morbo@google.com>
Tested-by: Justin Stitt <jstitt007@gmail.com>
Reviewed-by: Justin Stitt <jstitt007@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In mcp251xfd_register_get_dev_id() the device ID register is read with
handcrafted SPI transfers. As all registers, this register is in
little endian. Further it is not naturally aligned in struct
mcp251xfd_map_buf_nocrc::data. However after the transfer the register
content is converted from big endian to CPU endianness not taking care
of being unaligned.
Fix the conversion by converting from little endian to CPU endianness
taking the unaligned source into account.
Side note: So far the register content is 0x0 on all mcp251xfd
compatible chips, and is only used for an informative printk.
Link: https://lore.kernel.org/all/20220627092859.809042-1-mkl@pengutronix.de
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
dev_id
The device ID register is 32 bits wide. The driver uses incorrectly
the size of a pointer to a u32 to calculate the length of the SPI
transfer. This results in a read of 2 registers on 64 bit platforms.
This is no problem on the Linux side, as the RX buffer of the SPI
transfer is large enough. In the mpc251xfd chip this results in the
read of an undocumented register. So far no problems were observed.
Fix the length of the SPI transfer to read the device ID register
only.
Link: https://lore.kernel.org/all/20220616094914.244440-1-mkl@pengutronix.de
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Reported-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|