aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2022-06-17bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiersJay Vosburgh1-1/+3
The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by: Jonathan Toppins <[email protected]> Signed-off-by: Jay Vosburgh <[email protected]> Fixes: b0929915e035 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/[email protected]/ Tested-by: Jonathan Toppins <[email protected]> Reviewed-by: Jonathan Toppins <[email protected]> Link: https://lore.kernel.org/r/9400.1655407960@famine Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-17igb: fix a use-after-free issue in igb_clean_tx_ringLorenzo Bianconi1-2/+5
Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]--- Fixes: 9cbc948b5a20c ("igb: add XDP support") Signed-off-by: Lorenzo Bianconi <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.1655388571.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-17hamradio: 6pack: fix array-index-out-of-bounds in decode_std_command()Xu Jia1-1/+8
Hulk Robot reports incorrect sp->rx_count_cooked value in decode_std_command(). This should be caused by the subtracting from sp->rx_count_cooked before. It seems that sp->rx_count_cooked value is changed to 0, which bypassed the previous judgment. The situation is shown below: (Thread 1) | (Thread 2) decode_std_command() | resync_tnc() ... | if (rest == 2) | sp->rx_count_cooked -= 2; | else if (rest == 3) | ... | sp->rx_count_cooked = 0; sp->rx_count_cooked -= 1; | for (i = 0; i < sp->rx_count_cooked; i++) // report error checksum += sp->cooked_buf[i]; sp->rx_count_cooked is a shared variable but is not protected by a lock. The same applies to sp->rx_count. This patch adds a lock to fix the bug. The fail log is shown below: ======================================================================= UBSAN: array-index-out-of-bounds in drivers/net/hamradio/6pack.c:925:31 index 400 is out of range for type 'unsigned char [400]' CPU: 3 PID: 7433 Comm: kworker/u10:1 Not tainted 5.18.0-rc5-00163-g4b97bac0756a #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: events_unbound flush_to_ldisc Call Trace: <TASK> dump_stack_lvl+0xcd/0x134 ubsan_epilogue+0xb/0x50 __ubsan_handle_out_of_bounds.cold+0x62/0x6c sixpack_receive_buf+0xfda/0x1330 tty_ldisc_receive_buf+0x13e/0x180 tty_port_default_receive_buf+0x6d/0xa0 flush_to_ldisc+0x213/0x3f0 process_one_work+0x98f/0x1620 worker_thread+0x665/0x1080 kthread+0x2e9/0x3a0 ret_from_fork+0x1f/0x30 ... Reported-by: Hulk Robot <[email protected]> Signed-off-by: Xu Jia <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-17veth: Add updating of trans_startJay Vosburgh1-0/+4
Since commit 21a75f0915dd ("bonding: Fix ARP monitor validation"), the bonding ARP / ND link monitors depend on the trans_start time to determine link availability. NETIF_F_LLTX drivers must update trans_start directly, which veth does not do. This prevents use of the ARP or ND link monitors with veth interfaces in a bond. Resolve this by having veth_xmit update the trans_start time. Reported-by: Jonathan Toppins <[email protected]> Tested-by: Jonathan Toppins <[email protected]> Signed-off-by: Jay Vosburgh <[email protected]> Fixes: 21a75f0915dd ("bonding: Fix ARP monitor validation") Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: David S. Miller <[email protected]>
2022-06-16phy: aquantia: Fix AN when higher speeds than 1G are not advertisedClaudiu Manoil1-1/+14
Even when the eth port is resticted to work with speeds not higher than 1G, and so the eth driver is requesting the phy (via phylink) to advertise up to 1000BASET support, the aquantia phy device is still advertising for 2.5G and 5G speeds. Clear these advertising defaults when requested. Cc: Ondrej Spacek <[email protected]> Fixes: 09c4c57f7bc41 ("net: phy: aquantia: add support for auto-negotiation configuration") Signed-off-by: Claudiu Manoil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-16Merge tag 'net-5.19-rc3' of ↵Linus Torvalds21-135/+278
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Mostly driver fixes. Current release - regressions: - Revert "net: Add a second bind table hashed by port and address", needs more work - amd-xgbe: use platform_irq_count(), static setup of IRQ resources had been removed from DT core - dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation Current release - new code bugs: - hns3: modify the ring param print info Previous releases - always broken: - axienet: make the 64b addressable DMA depends on 64b architectures - iavf: fix issue with MAC address of VF shown as zero - ice: fix PTP TX timestamp offset calculation - usb: ax88179_178a needs FLAG_SEND_ZLP Misc: - document some net.sctp.* sysctls" * tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits) net: axienet: add missing error return code in axienet_probe() Revert "net: Add a second bind table hashed by port and address" net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg net: usb: ax88179_178a needs FLAG_SEND_ZLP MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS ARM: dts: at91: ksz9477_evb: fix port/phy validation net: bgmac: Fix an erroneous kfree() in bgmac_remove() ice: Fix memory corruption in VF driver ice: Fix queue config fail handling ice: Sync VLAN filtering features for DVM ice: Fix PTP TX timestamp offset calculation mlxsw: spectrum_cnt: Reorder counter pools docs: networking: phy: Fix a typo amd-xgbe: Use platform_irq_count() octeontx2-vf: Add support for adaptive interrupt coalescing xilinx: Fix build on x86. net: axienet: Use iowrite64 to write all 64b descriptor pointers net: axienet: make the 64b addresable DMA depends on 64b archectures net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization net: hns3: fix PF rss size initialization bug ...
2022-06-16net: axienet: add missing error return code in axienet_probe()Yang Yingliang1-0/+1
It should return error code in error path in axienet_probe(). Fixes: 00be43a74ca2 ("net: axienet: make the 64b addresable DMA depends on 64b archectures") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-15net: usb: ax88179_178a needs FLAG_SEND_ZLPJose Alonso1-13/+13
The extra byte inserted by usbnet.c when (length % dev->maxpacket == 0) is causing problems to device. This patch sets FLAG_SEND_ZLP to avoid this. Tested with: 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet Problems observed: ====================================================================== 1) Using ssh/sshfs. The remote sshd daemon can abort with the message: "message authentication code incorrect" This happens because the tcp message sent is corrupted during the USB "Bulk out". The device calculate the tcp checksum and send a valid tcp message to the remote sshd. Then the encryption detects the error and aborts. 2) NETDEV WATCHDOG: ... (ax88179_178a): transmit queue 0 timed out 3) Stop normal work without any log message. The "Bulk in" continue receiving packets normally. The host sends "Bulk out" and the device responds with -ECONNRESET. (The netusb.c code tx_complete ignore -ECONNRESET) Under normal conditions these errors take days to happen and in intense usage take hours. A test with ping gives packet loss, showing that something is wrong: ping -4 -s 462 {destination} # 462 = 512 - 42 - 8 Not all packets fail. My guess is that the device tries to find another packet starting at the extra byte and will fail or not depending on the next bytes (old buffer content). ====================================================================== Signed-off-by: Jose Alonso <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-15Merge branch '100GbE' of ↵David S. Miller5-46/+94
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-14 This series contains updates to ice driver only. Michal fixes incorrect Tx timestamp offset calculation for E822 devices. Roman enforces required VLAN filtering settings for double VLAN mode. Przemyslaw fixes memory corruption issues with VFs by ensuring queues are disabled in the error path of VF queue configuration and to disabled VFs during reset. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-06-14net: bgmac: Fix an erroneous kfree() in bgmac_remove()Christophe JAILLET1-1/+0
'bgmac' is part of a managed resource allocated with bgmac_alloc(). It should not be freed explicitly. Remove the erroneous kfree() from the .remove() function. Fixes: 34a5102c3235 ("net: bgmac: allocate struct bgmac just once & don't copy it") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/a026153108dd21239036a032b95c25b5cece253b.1655153616.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-14ice: Fix memory corruption in VF driverPrzemyslaw Patynowski1-0/+5
Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled, when it requests a reset. If PF driver assumes that VF is disabled, while VF still has queues configured, VF may unmap DMA resources. In such scenario device still can map packets to memory, which ends up silently corrupting it. Previously, VF driver could experience memory corruption, which lead to crash: [ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237 [ 5119.170166] PGD 0 P4D 0 [ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI [ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G W I --------- - - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1 [ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019 [ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf] [ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30 [ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74 [ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282 [ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002 [ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203 [ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009 [ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000 [ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000 [ 5119.170269] FS: 0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000 [ 5119.170274] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0 [ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 5119.170290] PKRU: 55555554 [ 5119.170292] Call Trace: [ 5119.170298] iavf_clean_rx_ring+0xad/0x110 [iavf] [ 5119.170324] iavf_free_rx_resources+0xe/0x50 [iavf] [ 5119.170342] iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf] [ 5119.170358] iavf_virtchnl_completion+0xd8a/0x15b0 [iavf] [ 5119.170377] ? iavf_clean_arq_element+0x210/0x280 [iavf] [ 5119.170397] iavf_adminq_task+0x126/0x2e0 [iavf] [ 5119.170416] process_one_work+0x18f/0x420 [ 5119.170429] worker_thread+0x30/0x370 [ 5119.170437] ? process_one_work+0x420/0x420 [ 5119.170445] kthread+0x151/0x170 [ 5119.170452] ? set_kthread_struct+0x40/0x40 [ 5119.170460] ret_from_fork+0x35/0x40 [ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas [ 5119.170613] i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf] [ 5119.170627] CR2: 00001b9780003237 Fixes: ec4f5a436bdf ("ice: Check if VF is disabled for Opcode and other operations") Signed-off-by: Przemyslaw Patynowski <[email protected]> Co-developed-by: Slawomir Laba <[email protected]> Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-14ice: Fix queue config fail handlingPrzemyslaw Patynowski1-27/+26
Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail. Not disabling them might lead to scenario, where PF driver leaves VF queues enabled, when VF's VSI failed queue config. In this scenario VF should not have RX/TX queues enabled. If PF failed to set up VF's queues, VF will reset due to TX timeouts in VF driver. Initialize iterator 'i' to -1, so if error happens prior to configuring queues then error path code will not disable queue 0. Loop that configures queues will is using same iterator, so error path code will only disable queues that were configured. Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Suggested-by: Slawomir Laba <[email protected]> Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-14ice: Sync VLAN filtering features for DVMRoman Storozhenko1-18/+31
VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be both enabled or disabled. In case of turning off/on only one of the features, another feature must be turned off/on automatically with issuing an appropriate message to the kernel log. Fixes: 1babaf77f49d ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev") Signed-off-by: Roman Storozhenko <[email protected]> Co-developed-by: Anatolii Gerasymenko <[email protected]> Signed-off-by: Anatolii Gerasymenko <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-06-14ice: Fix PTP TX timestamp offset calculationMichal Michalik2-1/+32
The offset was being incorrectly calculated for E822 - that led to collisions in choosing TX timestamp register location when more than one port was trying to use timestamping mechanism. In E822 one quad is being logically split between ports, so quad 0 is having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should have separate memory location for tracking timestamps. Due to error for example ports 1 and 2 had been assigned to quad 0 with same offset (0), while port 1 should have offset 0 and 1 offset 16. Fix it by correctly calculating quad offset. Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support") Signed-off-by: Michal Michalik <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-06-14Merge tag 'x86-bugs-2022-06-01' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 MMIO stale data fixes from Thomas Gleixner: "Yet another hw vulnerability with a software mitigation: Processor MMIO Stale Data. They are a class of MMIO-related weaknesses which can expose stale data by propagating it into core fill buffers. Data which can then be leaked using the usual speculative execution methods. Mitigations include this set along with microcode updates and are similar to MDS and TAA vulnerabilities: VERW now clears those buffers too" * tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/speculation/mmio: Print SMT warning KVM: x86/speculation: Disable Fill buffer clear within guests x86/speculation/mmio: Reuse SRBDS mitigation for SBDS x86/speculation/srbds: Update SRBDS mitigation selection x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data x86/speculation/mmio: Enable CPU Fill buffer clearing on idle x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data x86/speculation: Add a common function for MD_CLEAR mitigation update x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug Documentation: Add documentation for Processor MMIO Stale Data
2022-06-14mlxsw: spectrum_cnt: Reorder counter poolsPetr Machata1-1/+1
Both RIF and ACL flow counters use a 24-bit SW-managed counter address to communicate which counter they want to bind. In a number of Spectrum FW releases, binding a RIF counter is broken and slices the counter index to 16 bits. As a result, on Spectrum-2 and above, no more than about 410 RIF counters can be effectively used. This translates to 205 netdevices for which L3 HW stats can be enabled. (This does not happen on Spectrum-1, because there are fewer counters available overall and the counter index never exceeds 16 bits.) Binding counters to ACLs does not have this issue. Therefore reorder the counter allocation scheme so that RIF counters come first and therefore get lower indices that are below the 16-bit barrier. Fixes: 98e60dce4da1 ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'") Reported-by: Maksym Yaremchuk <[email protected]> Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-06-13amd-xgbe: Use platform_irq_count()Jean-Philippe Brucker1-2/+2
The AMD XGbE driver currently counts the number of interrupts assigned to the device by inspecting the pdev->resource array. Since commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") removed IRQs from this array, the driver now attempts to get all interrupts from 1 to -1U and gives up probing once it reaches an invalid interrupt index. Obtain the number of IRQs with platform_irq_count() instead. Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core") Signed-off-by: Jean-Philippe Brucker <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Tom Lendacky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-13octeontx2-vf: Add support for adaptive interrupt coalescingSuman Ghosh1-1/+2
Fixes: 6e144b47f560 (octeontx2-pf: Add support for adaptive interrupt coalescing) Added support for VF interfaces as well. Signed-off-by: Suman Ghosh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13xilinx: Fix build on x86.David S. Miller1-4/+4
CONFIG_64BIT is not sufficient for checking for availability of iowrite64() and friends. Also, the out_addr helpers need to be inline. Fixes: b690f8df6497 ("net: axienet: Use iowrite64 to write all 64b descriptor pointers") Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: axienet: Use iowrite64 to write all 64b descriptor pointersAndy Chiu1-3/+18
According to commit f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only writing MSB part of tail descriptor pointer causes DMA engine to start fetching descriptors. However, we found that it is true only if dma is in idle state. In other words, dma would use a tailp even if it only has LSB updated, when the dma is running. The non-atomicity of this behavior could be problematic if enough delay were introduced in between the 2 writes. For example, if an interrupt comes right after the LSB write and the cpu spends long enough time in the handler for the dma to get back into idle state by completing descriptors, then the seconcd write to MSB would treat dma to start fetching descriptors again. Since the descriptor next to the one pointed by current tail pointer is not filled by the kernel yet, fetching a null descriptor here causes a dma internal error and halt the dma engine down. We suggest that the dma engine should start process a 64-bit MMIO write to the descriptor pointer only if ONE 32-bit part of it is written on all states. Or we should restrict the use of 64-bit addressable dma on 32-bit platforms, since those devices have no instruction to guarantee the write to LSB and MSB part of tail pointer occurs atomically to the dma. initial condition: curp = x-3; tailp = x-2; LSB = x; MSB = 0; cpu: |dma: iowrite32(LSB, tailp) | completes #(x-3) desc, curp = x-3 ... | tailp updated => irq | completes #(x-2) desc, curp = x-2 ... | completes #(x-1) desc, curp = x-1 ... | ... ... | completes #x desc, curp = tailp = x <= irqreturn | reaches tailp == curp = x, idle iowrite32(MSB, tailp + 4) | ... | tailp updated, starts fetching... | fetches #(x + 1) desc, sees cntrl = 0 | post Tx error, halt Signed-off-by: Andy Chiu <[email protected]> Reported-by: Max Hsu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: axienet: make the 64b addresable DMA depends on 64b archecturesAndy Chiu2-24/+40
Currently it is not safe to config the IP as 64-bit addressable on 32-bit archectures, which cannot perform a double-word store on its descriptor pointers. The pointer is 64-bit wide if the IP is configured as 64-bit, and the device would process the partially updated pointer on some states if the pointer was updated via two store-words. To prevent such condition, we force a probe fail if we discover that the IP has 64-bit capability but it is not running on a 64-Bit kernel. This is a series of patch (1/2). The next patch must be applied in order to make 64b DMA safe on 64b archectures. Signed-off-by: Andy Chiu <[email protected]> Reported-by: Max Hsu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: hns3: fix tm port shapping of fibre port is incorrect after driver ↵Guangbin Huang3-4/+10
initialization Currently in driver initialization process, driver will set shapping parameters of tm port to default speed read from firmware. However, the speed of SFP module may not be default speed, so shapping parameters of tm port may be incorrect. To fix this problem, driver sets new shapping parameters for tm port after getting exact speed of SFP module in this case. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: hns3: fix PF rss size initialization bugJie Wang1-1/+3
Currently hns3 driver misuses the VF rss size to initialize the PF rss size in hclge_tm_vport_tc_info_update. So this patch fix it by checking the vport id before initialization. Fixes: 7347255ea389 ("net: hns3: refactor PF rss get APIs with new common rss get APIs") Signed-off-by: Jie Wang <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: hns3: restore tm priority/qset to default settings when tc disabledGuangbin Huang2-31/+65
Currently, settings parameters of schedule mode, dwrr, shaper of tm priority or qset of one tc are only be set when tc is enabled, they are not restored to the default settings when tc is disabled. It confuses users when they cat tm_priority or tm_qset files of debugfs. So this patch fixes it. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: hns3: modify the ring param print infoJie Wang1-1/+1
Currently tx push is also a ring param. So the original ring param print info in hns3_is_ringparam_changed should be adjusted. Fixes: 07fdc163ac88 ("net: hns3: refactor hns3_set_ringparam()") Signed-off-by: Jie Wang <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: hns3: don't push link state to VF if unaliveJian Shen1-0/+6
It's unnecessary to push link state to unalive VF, and the VF will query link state from PF when it being start works. Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs") Signed-off-by: Jian Shen <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: hns3: set port base vlan tbl_sta to false before removing old vlanGuangbin Huang1-0/+1
When modify port base vlan, the port base vlan tbl_sta needs to set to false before removing old vlan, to indicate this operation is not finish. Fixes: c0f46de30c96 ("net: hns3: fix port base vlan add fail when concurrent with reset") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-12Merge tag 'platform-drivers-x86-v5.19-2' of ↵Linus Torvalds8-14/+35
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Highlights: - Fix hp-wmi regression on HP Omen laptops introduced in 5.18 - Several hardware-id additions - A couple of other tiny fixes" * tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel: hid: Add Surface Go to VGBS allow list platform/x86: hp-wmi: Use zero insize parameter only when supported platform/x86: hp-wmi: Resolve WMI query failures on some devices platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support platform/x86: barco-p50-gpio: Add check for platform_driver_register platform/x86/intel: pmc: Support Intel Raptorlake P platform/x86/intel: Fix pmt_crashlog array reference platform/mellanox: Add static in struct declaration. platform/mellanox: Spelling s/platfom/platform/
2022-06-12Merge tag 'random-5.19-rc2-for-linus' of ↵Linus Torvalds2-41/+48
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator fixes from Jason Donenfeld: - A fix for a 5.19 regression for a case in which early device tree initializes the RNG, which flips a static branch. On most plaforms, jump labels aren't initialized until much later, so this caused splats. On a few mailing list threads, we cooked up easy fixes for arm64, arm32, and risc-v. But then things looked slightly more involved for xtensa, powerpc, arc, and mips. And at that point, when we're patching 7 architectures in a place before the console is even available, it seems like the cost/risk just wasn't worth it. So random.c works around it now by checking the already exported `static_key_initialized` boolean, as though somebody already ran into this issue in the past. I'm not super jazzed about that; it'd be prettier to not have to complicate downstream code. But I suppose it's practical. - A few small code nits and adding a missing __init annotation. - A change to the default config values to use the cpu and bootloader's seeds for initializing the RNG earlier. This brings them into line with what all the distros do (Fedora/RHEL, Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at least), and moreover will now give us test coverage in various test beds that might have caught the above device tree bug earlier. - A change to WireGuard CI's configuration to increase test coverage around the RNG. - A documentation comment fix to unrelated maintainerless CRC code that I was asked to take, I guess because it has to do with polynomials (which the RNG thankfully no longer uses). * tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: wireguard: selftests: use maximum cpu features and allow rng seeding random: remove rng_has_arch_random() random: credit cpu and bootloader seeds by default random: do not use jump labels before they are initialized random: account for arch randomness in bits random: mark bootloader randomness code as __init random: avoid checking crng_ready() twice in random_init() crc-itu-t: fix typo in CRC ITU-T polynomial comment
2022-06-12platform/x86/intel: hid: Add Surface Go to VGBS allow listDuke Lee1-0/+6
The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be added to dmi_vgbs_allow_list to enable tablet mode when an attached Type Cover is folded back. BugLink: https://github.com/linux-surface/linux-surface/issues/837 Signed-off-by: Duke Lee <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2022-06-12platform/x86: hp-wmi: Use zero insize parameter only when supportedBedant Patnaik1-8/+15
commit be9d73e64957 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") and commit 12b19f14a21a ("platform/x86: hp-wmi: Fix hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug): Attempt to CreateField of length zero (20211217/dsopcode-133) because of the ACPI method HWMC, which unconditionally creates a Field of size (insize*8) bits: CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN) In cases where args->insize = 0, the Field size is 0, resulting in an error. Fix this by using zero insize only if 0x5 error code is returned Tested on Omen 15 AMD (2020) board ID: 8786. Fixes: be9d73e64957 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls") Signed-off-by: Bedant Patnaik <[email protected]> Tested-by: Jorge Lopez <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2022-06-12platform/x86: hp-wmi: Resolve WMI query failures on some devicesJorge Lopez1-2/+4
WMI queries fail on some devices where the ACPI method HWMC unconditionally attempts to create Fields beyond the buffer if the buffer is too small, this breaks essential features such as power profiles: CreateByteField (Arg1, 0x10, D008) CreateByteField (Arg1, 0x11, D009) CreateByteField (Arg1, 0x12, D010) CreateDWordField (Arg1, 0x10, D032) CreateField (Arg1, 0x80, 0x0400, D128) In cases where args->data had zero length, ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit offset/length 128/8 exceeds size of target Buffer (128 bits) (20211217/dsopcode-198) was obtained. ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit offset/length 136/8 exceeds size of target Buffer (136bits) (20211217/dsopcode-198) The original code created a buffer size of 128 bytes regardless if the WMI call required a smaller buffer or not. This particular behavior occurs in older BIOS and reproduced in OMEN laptops. Newer BIOS handles buffer sizes properly and meets the latest specification requirements. This is the reason why testing with a dynamically allocated buffer did not uncover any failures with the test systems at hand. This patch was tested on several OMEN, Elite, and Zbooks. It was confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN Laptop 15-ek0xxx. No problems were reported when testing on several Elite and Zbooks notebooks. Fixes: 4b4967cbd268 ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated") Signed-off-by: Jorge Lopez <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Hans de Goede <[email protected]>
2022-06-11Merge tag 'gpio-fixes-for-v5.19-rc2' of ↵Linus Torvalds6-68/+99
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "A set of fixes. Most address the new warning we emit at build time when irq chips are not immutable with some additional tweaks to gpio-crystalcove from Andy and a small tweak to gpio-dwapd. - make irq_chip structs immutable in several Diolan and intel drivers to get rid of the new warning we emit when fiddling with irq chips - don't print error messages on probe deferral in gpio-dwapb" * tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: dwapb: Don't print error on -EPROBE_DEFER gpio: dln2: make irq_chip immutable gpio: sch: make irq_chip immutable gpio: merrifield: make irq_chip immutable gpio: wcove: make irq_chip immutable gpio: crystalcove: Join function declarations and long lines gpio: crystalcove: Use specific type and API for IRQ number gpio: crystalcove: make irq_chip immutable
2022-06-11Merge tag 'scsi-fixes' of ↵Linus Torvalds15-61/+94
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Driver fixes and and one core patch. Nine of the driver patches are minor fixes and reworks to lpfc and the rest are trivial and minor fixes elsewhere" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pmcraid: Fix missing resource cleanup in error case scsi: ipr: Fix missing/incorrect resource cleanup in error case scsi: mpt3sas: Fix out-of-bounds compiler warning scsi: lpfc: Update lpfc version to 14.2.0.4 scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmds scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted scsi: lpfc: Address NULL pointer dereference after starget_to_rport() scsi: lpfc: Resolve some cleanup issues following SLI path refactoring scsi: lpfc: Resolve some cleanup issues following abort path refactoring scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event() scsi: vmw_pvscsi: Expand vcpuHint to 16 bits scsi: sd: Fix interpretation of VPD B9h length
2022-06-11Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds7-12/+23
Pull virtio fixes from Michael Tsirkin: "Fixes all over the place, most notably fixes for latent bugs in drivers that got exposed by suppressing interrupts before DRIVER_OK, which in turn has been done by 8b4ec69d7e09 ("virtio: harden vring IRQ")" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: um: virt-pci: set device ready in probe() vdpa: make get_vq_group and set_group_asid optional virtio: Fix all occurences of the "the the" typo vduse: Fix NULL pointer dereference on sysfs access vringh: Fix loop descriptors check in the indirect cases vdpa/mlx5: clean up indenting in handle_ctrl_vlan() vdpa/mlx5: fix error code for deleting vlan virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed vdpa/mlx5: Fix syntax errors in comments virtio-rng: make device ready before making request
2022-06-10Merge branch '40GbE' of ↵Jakub Kicinski4-10/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-06-09 Grzegorz prevents addition of TC flower filters to TC0 and fixes queue iteration for VF ADQ to number of actual queues for i40e. Aleksandr prevents running of ethtool tests when device is being reset for i40e. Michal resolves an issue where iavf does not report its MAC address properly. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: Fix issue with MAC address of VF shown as zero i40e: Fix call trace in setup_tx_descriptors i40e: Fix calculating the number of queue pairs i40e: Fix adding ADQ filter to TC0 ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-10Merge tag 'for-5.19/dm-fixes-2' of ↵Linus Torvalds5-90/+46
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM core's bioset initialization so that blk integrity pool is properly setup. Remove now unused bioset_init_from_src. - Fix DM zoned hang from locking imbalance due to needless check in clone_endio(). * tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix zoned locking imbalance due to needless check in clone_endio block: remove bioset_init_from_src dm: fix bio_set allocation
2022-06-10platform/x86: gigabyte-wmi: Add support for B450M DS3H-CFAugust Wikerfors1-0/+1
Tested and works on my system. Signed-off-by: August Wikerfors <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2022-06-10platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 supportPiotr Chmura1-0/+1
Add dmi_system_id of Gigabyte Z690M AORUS ELITE AX DDR4 board. Tested on my PC. Signed-off-by: Piotr Chmura <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2022-06-10platform/x86: barco-p50-gpio: Add check for platform_driver_registerJiasheng Jiang1-1/+4
As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 86af1d02d458 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board") Signed-off-by: Jiasheng Jiang <[email protected]> Acked-by: Peter Korsgaard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2022-06-10platform/x86/intel: pmc: Support Intel Raptorlake PGeorge D Sworo1-0/+1
Add Raptorlake P to the list of the platforms that intel_pmc_core driver supports for pmc_core device. Raptorlake P PCH is based on Alderlake P PCH. Signed-off-by: George D Sworo <[email protected]> Reviewed-by: David E. Box <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2022-06-10platform/x86/intel: Fix pmt_crashlog array referenceDavid Arcari1-1/+1
The probe function pmt_crashlog_probe() may incorrectly reference the 'priv->entry array' as it uses 'i' to reference the array instead of 'priv->num_entries' as it should. This is similar to the problem that was addressed in pmt_telemetry_probe via commit 2cdfa0c20d58 ("platform/x86/intel: Fix 'rmmod pmt_telemetry' panic"). Cc: "David E. Box" <[email protected]> Cc: Hans de Goede <[email protected]> Cc: Mark Gross <[email protected]> Cc: [email protected] Signed-off-by: David Arcari <[email protected]> Reviewed-by: David E. Box <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2022-06-10platform/mellanox: Add static in struct declaration.Michael Shych1-1/+1
Fix problem of missing static in struct declaration. Fixes: 662f24826f954 ("platform/mellanox: Add support for new SN2201 system") Reported-by: kernel test robot <[email protected]> Signed-off-by: Michael Shych <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2022-06-10dm: fix zoned locking imbalance due to needless check in clone_endioMike Snitzer1-15/+11
After the commit ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone"), clone_endio() only calls dm_zone_endio() when DM targets remap the clone bio's bdev to something other than the md->disk->part0 default. However, if a DM target (e.g. dm-crypt) stacked ontop of a dm-zoned does not remap the clone bio using bio_set_dev() then dm_zone_endio() is not called at completion of the bios and zone locks are not properly unlocked. This triggers a hang, in dm_zone_map_bio(), when blktests block/004 is run for dm-crypt on zoned block devices. To avoid the hang, simply remove the clone_endio() check that verifies the target remapped the clone bio to a device other than the default. Fixes: ca522482e3ea ("dm: pass NULL bdev to bio_alloc_clone") Reported-by: Shin'ichiro Kawasaki <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-06-10platform/mellanox: Spelling s/platfom/platform/Geert Uytterhoeven1-1/+1
Fix a misspelling of the word "platform". Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Michael Shych <[email protected]> Link: https://lore.kernel.org/r/9c8edde31e271311b7832d7677fe84aba917da8d.1653376503.git.geert@linux-m68k.org Signed-off-by: Hans de Goede <[email protected]>
2022-06-10Merge tag 'pm-5.19-rc2' of ↵Linus Torvalds1-7/+25
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix an intel_idle issue introduced during the 5.16 development cycle and two recent regressions in the system reboot/poweroff code. Specifics: - Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra) - Allow all platforms to use the global poweroff handler and make non-syscall poweroff code paths work again (Dmitry Osipenko)" * tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE kernel/reboot: Fix powering off using a non-syscall code paths kernel/reboot: Use static handler for register_platform_power_off()
2022-06-10Merge tag 'ata-5.19-rc2' of ↵Linus Torvalds4-12/+20
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fixes from Damien Le Moal: "Several small fixes for rc2: - Remove unused field in struct ata_port (Hannes) - Fix a potential (very unlikely) NULL pointer dereference in ata_host_alloc_pinfo() (Sergey) - Fix a device reference leak in the pata_octeon_cf driver (Miaoqian) - Fixes for handling access to the concurrent positioning ranges log page used with multi-actuator HDDs (Tyler) - Fix the values shown by the pio_mode and dma_mode sysfs device attributes (Sergey) - Update the MAINTAINERS file to add libata sysfs ABI documentation file (Sergey)" * tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: MAINTAINERS: add ATA sysfs file documentation to libata entry ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files libata: fix translation of concurrent positioning ranges libata: fix reading concurrent positioning ranges log ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo() ata: libata: drop 'sas_last_tag'
2022-06-10Merge tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds49-301/+430
Pull drm fixes from Dave Airlie: "Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and then some misc panfrost, bridge/panel ones, and one ast fix for multi-monitors. Probably pick up a bit more next week like rc3 often does. amdgpu: - DCN 3.1 golden settings fix - eDP fixes - DMCUB fixes - GFX11 fixes and cleanups - VCN fix for yellow carp - GMC11 fixes - RAS fixes - GPUVM TLB flush fixes - SMU13 fixes - VCN3 AV1 regression fix - VCN2 JPEG fix - Other misc fixes amdkfd: - MMU notifier fix - Support for more GC 10.3.x families - Pinned BO handling fix - Partial migration bug fix panfrost: - fix a use after free ti-sn65dsi83: - fix invalid DT configuration panel: - two self refresh fixes ast: - multiple output fix" * tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/ast: Support multiple outputs drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs. drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit drm/amdgpu: always flush the TLB on gfx8 drm/amdgpu: fix limiting AV1 to the first instance on VCN3 drm/amdkfd:Fix fw version for 10.3.6 drm/amdgpu: Add MODE register to wave debug info in gfx11 Revert "drm/amd/display: Pass the new context into disable OTG WA" Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups" drm/atomic: Force bridge self-refresh-exit on CRTC switch drm/bridge: analogix_dp: Support PSR-exit to disable transition drm/amdgpu: suppress the compile warning about 64 bit type drm/amd/pm: suppress compile warnings about possible unaligned accesses drm/amdkfd: Fix partial migration bugs drm/amdkfd: add pinned BOs to kfd_bo_list drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved drm/amdgpu: enable tmz by default for GC 10.3.7 drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions drm/amdkfd: Use mmget_not_zero in MMU notifier drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus ...
2022-06-10Merge tag 'net-5.19-rc2-2' of ↵Linus Torvalds12-82/+113
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Quick follow up, to cleanly fast-forward net again. Current release - new code bugs: - Revert "net/mlx5e: Allow relaxed ordering over VFs" Previous releases - regressions: - seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev Misc: - rename TLS_INFO_ZC_SENDFILE to better express the meaning" * tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev nfp: flower: restructure flow-key for gre+vlan combination nfp: avoid unnecessary check warnings in nfp_app_get_vf_config tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX net/mlx5: fs, fail conflicting actions net/mlx5: Rearm the FW tracer after each tracer event net/mlx5: E-Switch, pair only capable devices net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules Revert "net/mlx5e: Allow relaxed ordering over VFs" MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
2022-06-10Merge tag 'for-linus-5.19a-rc2-tag' of ↵Linus Torvalds8-46/+663
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a small cleanup removing "export" of an __init function - a small series adding a new infrastructure for platform flags - a series adding generic virtio support for Xen guests (frontend side) * tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: unexport __init-annotated xen_xlate_map_ballooned_pages() arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices xen/grant-dma-iommu: Introduce stub IOMMU driver dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops xen/virtio: Enable restricted memory access using Xen grant mappings xen/grant-dma-ops: Add option to restrict memory access under Xen xen/grants: support allocating consecutive grants arm/xen: Introduce xen_setup_dma_ops() virtio: replace arch_has_restricted_virtio_memory_access() kernel: add platform_has() infrastructure
Powered by cgit, Gruvboxed by Blaster4385.