aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-05-24drm/amdkfd: Fix a circular lock dependencyFelix Kuehling1-4/+29
Fix a circular lock dependency exposed under userptr memory pressure. The DQM lock is the only one taken inside the MMU notifier. We need to make sure that no reclaim is done under this lock, and that no other locks are taken under which reclaim is possible. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Delete alloc_format field from map_queue structOak Zeng4-16/+2
Alloc format was never really supported by MEC FW. FW always does one per pipe allocation. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Expose sdma engine numbers to topologyOak Zeng2-0/+9
Expose available numbers of both SDMA queue types in the topology. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Introduce XGMI SDMA queue typeOak Zeng9-36/+128
Existing QUEUE_TYPE_SDMA means PCIe optimized SDMA queues. Introduce a new QUEUE_TYPE_SDMA_XGMI, which is optimized for non-PCIe transfer such as XGMI. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Fix sdma queue map issueOak Zeng1-9/+12
Previous codes assumes there are two sdma engines. This is not true e.g., Raven only has 1 SDMA engine. Fix the issue by using sdma engine number info in device_info. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Move sdma_queue_id calculation into allocate_sdma_queue()Yong Zhao1-18/+11
This avoids duplicated code. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Allocate hiq and sdma mqd from mqd trunkOak Zeng5-40/+80
Instead of allocat hiq and sdma mqd from sub-allocator, allocate them from a mqd trunk pool. This is done for all asics Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Move non-sdma mqd allocation out of init_mqdOak Zeng3-25/+64
This is preparation work to introduce more mqd allocation scheme Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Fix a potential memory leakOak Zeng1-1/+4
Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails. Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Allocate MQD trunk for HIQ and SDMAOak Zeng2-0/+33
MEC FW for some new asic requires all SDMA MQDs to be in a continuous trunk of memory right after HIQ MQD. Add a field in device queue manager to hold the HIQ/SDMA MQD memory object and allocate MQD trunk on device queue manager initialization. Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Add mqd size in mqd manager structOak Zeng4-0/+13
Also initialize mqd size on mqd manager initialization Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Init mqd managers in device queue manager initOak Zeng4-95/+47
Previously mqd managers was initialized on demand. As there are only a few type of mqd managers, the on demand initialization doesn't save too much memory. Initialize them on device queue initialization instead and delete the get_mqd_manager interface. This makes codes more organized for future changes. Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Introduce DIQ type mqd managerOak Zeng6-1/+37
With introduction of new mqd allocation scheme for HIQ, DIQ and HIQ use different mqd allocation scheme, DIQ can't reuse HIQ mqd manager Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Introduce asic-specific mqd_manager_init functionOak Zeng7-32/+8
Global function mqd_manager_init just calls asic-specific functions and it is not necessary. Delete it and introduce a mqd_manager_init interface in dqm for asic-specific mqd manager init. Call mqd_manager_init interface directly to initialize mqd manager Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: Improve error handling for HMMFelix Kuehling1-4/+18
Use unsigned long for number of pages. Check that pfns are valid after hmm_vma_fault. If they are not, return an error instead of continuing with invalid page pointers and PTEs. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: more descriptive message if HMM not enabledPhilip Yang1-0/+2
If using old kernel config file, CONFIG_ZONE_DEVICE is not selected, so CONFIG_HMM and CONFIG_HMM_MIRROR is not enabled, the current driver error message "Failed to register MMU notifier" is not clear. Inform user with more descriptive message on how to fix the missing kernel config option. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109808 Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: support userptr cross VMAs case with HMMPhilip Yang1-35/+91
userptr may cross two VMAs if the forked child process (not call exec after fork) malloc buffer, then free it, and then malloc larger size buf, kerenl will create new VMA adjacent to old VMA which was cloned from parent process, some pages of userptr are in the first VMA, the rest pages are in the second VMA. HMM expects range only have one VMA, loop over all VMAs in the address range, create multiple ranges to handle this case. See is_mergeable_anon_vma in mm/mmap.c for details. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: support concurrent userptr update for HMMPhilip Yang1-6/+19
Userptr restore may have concurrent userptr invalidation after hmm_vma_fault adds the range to the hmm->ranges list, needs call hmm_vma_range_done to remove the range from hmm->ranges list first, then reschedule the restore worker. Otherwise hmm_vma_fault will add same range to the list, this will cause loop in the list because range->next point to range itself. Add function untrack_invalid_user_pages to reduce code duplication. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: fix HMM config dependency issuePhilip Yang3-24/+19
Only select HMM_MIRROR will get kernel config dependency warnings if CONFIG_HMM is missing in the config. Add depends on HMM will solve the issue. Add conditional compilation to fix compilation errors if HMM_MIRROR is not enabled as HMM config is not enabled. Remove unused function amdgpu_ttm_tt_mark_user_pages. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: replace get_user_pages with HMM mirror helpersPhilip Yang9-278/+182
Use HMM helper function hmm_vma_fault() to get physical pages backing userptr and start CPU page table update track of those pages. Then use hmm_vma_range_done() to check if those pages are updated before amdgpu_cs_submit for gfx or before user queues are resumed for kfd. If userptr pages are updated, for gfx, amdgpu_cs_ioctl will restart from scratch, for kfd, restore worker is rescheduled to retry. HMM simplify the CPU page table concurrent update check, so remove guptasklock, mmu_invalidations, last_set_pages fields from amdgpu_ttm_tt struct. HMM does not pin the page (increase page ref count), so remove related operations like release_pages(), put_page(), mark_page_dirty(). Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: avoid HMM change cause circular lockPhilip Yang1-15/+17
There is circular lock between gfx and kfd path with HMM change: lock(dqm) -> bo::reserve -> amdgpu_mn_lock To avoid this, move init/unint_mqd() out of lock(dqm), to remove nested locking between mmap_sem and bo::reserve. The locking order is: bo::reserve -> amdgpu_mn_lock(p->mn) Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: use HMM callback to replace mmu notifierPhilip Yang4-98/+72
Replace our MMU notifier with hmm_mirror_ops.sync_cpu_device_pagetables callback. Enable CONFIG_HMM and CONFIG_HMM_MIRROR as a dependency in DRM_AMDGPU_USERPTR Kconfig. It supports both KFD userptr and gfx userptr paths. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: Use heavy weight for tlb invalidation on xgmi configurationshaoyunl1-27/+26
There is a bug found in vml2 xgmi logic: mtype is always sent as NC on the VMC to TC interface for a page walk, regardless of whether the request is being sent to local or remote GPU. NC means non-coherent and will cause the VMC return data to be cached in the TCC (versus UC – uncached will not cache the data). Since the page table updates are being done by SDMA/HDP, then TCC will never be updated and the GC VML2 will continue to hit on the TCC and never get the updated page tables and result in a fault. Heave weigh tlb invalidation does a WB/INVAL of the L1/L2 GL data caches so TCC will not be hit on next request Signed-off-by: shaoyunl <Shaoyun.Liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Preserve ttmp[4:5] instead of ttmp[14:15]Jay Cornwall2-258/+253
ttmp[4:5] is initialized by the SPI with SPI_GDBG_TRAP_DATA* values. These values are more useful to the debugger than ttmp[14:15], which carries dispatch_scratch_base*. There are too few registers to preserve both. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Fix gfx9 XNACK state save/restoreJay Cornwall2-10/+10
SQ_WAVE_IB_STS.RCNT grew from 4 bits to 5 in gfx9. Do not truncate when saving in the high bits of TTMP1. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Preserve wave state after instruction fetch MEM_VIOLJay Cornwall2-6/+14
If instruction fetch fails the wave cannot be halted and returned to the shader without raising MEM_VIOL again. Currently the wave is terminated if this occurs, but this loses information about the cause of the fault. The debugger would prefer the faulting wave state to be context-saved. Poll inside the trap handler until TRAPSTS.SAVECTX indicates context save is ready. Exit the poll loop and complete the remainder of the exception handler, then return to the shader. The next instruction fetch will be from the trap handler and not the faulting PC. Context save will then deschedule the wave and save its state. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Fix gfx8 MEM_VIOL exception handlerJay Cornwall2-20/+2
When MEM_VIOL is asserted the context save handler rewinds the program counter. This is incorrect for any source of the exception. MEM_VIOL may be raised in normal operation by out-of-bounds access to LDS or GDS and does not require special handling. Remove PC adjustment when MEM_VIOL has been raised. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Fix compute profile switchingHarish Kasiviswanathan3-5/+29
Fix compute profile switching on process termination. Add a dedicated reference counter to keep track of entry/exit to/from compute profile. This enables switching compute profiles for other reasons than process creation or termination. Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Eric Huang <JinhuiEric.Huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Shift sdma_engine_id and sdma_queue_id in mqdOak Zeng3-6/+3
FW of some new ASICs requires sdma mqd size to be not more than 128 dwords. Repurpose the last 2 reserved fields of sdma mqd for driver internal use, so the total mqd size is no bigger than 128 dwords Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Differentiate b/t sdma_id and sdma_queue_idOak Zeng1-5/+5
sdma_queue_id is sdma queue index inside one sdma engine. sdma_id is sdma queue index among all sdma engines. Use those two names properly. Signed-off-by: Oak Zeng <ozeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Add sdma allocation debug messageOak Zeng1-0/+3
Add debug messages during SDMA queue allocation. Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdkfd: Use 64 bit sdma_bitmapOak Zeng2-6/+6
Maximumly support 64 sdma queues Signed-off-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: enable ppfeaturemask module parameter support on Vega20Evan Quan1-0/+21
Support DPM/DS/ULV related bitmasks of ppfeaturemask module parameter. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: use pcie_bandwidth_available rather than open coding itAlex Deucher1-39/+2
It does the same thing we were doing already. I though it needed work for gen3/4 speeds, but that seems to be covered already. Reviewed-by: Evan Quan <evan.quan@amd.com> Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24gpu: fix typos in code commentsWeitao Hou1-2/+2
fix eror to error Signed-off-by: Weitao Hou <houweitaoo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: fix sw SMU wrong UVD/VCE powergate settingEvan Quan1-6/+6
The UVD/VCE bits are set wrongly. This causes the UVD/VCE clocks are not brought back correctly on needed. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: use div64_ul for 32-bit compatibility v1Slava Abramov1-2/+2
v1: replace casting to unsigned long with div64_ul Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Slava Abramov <slava.abramov@amd.com> Tested-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: Enable "disable dpm" feature to support swSMU debug (v2)Chengming Gui3-8/+51
add pm_enabled to control the dpm off/on. v2: Directly return 0 to replace return ret and merge some check code. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Reviewed-by: Hawking Zhang <hawking.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/powerplay: Fix maybe-uninitialized in get_ppfeature_statusBhawanpreet Lakha1-1/+1
This fixes the warning below error: ‘feature_mask’ may be used uninitialized in this function [-Werror=maybe-uninitialized] *features_enabled = ((((uint64_t)feature_mask[0] << SMU_FEATURES_LOW_SHIFT) & SMU_FEATURES_LOW_MASK) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^ (((uint64_t)feature_mask[1] << SMU_FEATURES_HIGH_SHIFT) & SMU_FEATURES_HIGH_MASK)); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu: fix spelling mistake "retrived" -> "retrieved"Colin Ian King1-1/+1
There is a spelling mistake in a DRM_ERROR error message. Fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amdgpu/vega20: use mode1 reset for RAS and XGMIAlex Deucher1-0/+9
If RAS or XGMI are enabled, you have to use mode1 reset rather than BACO. Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: 3.2.31Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Disable ABM before destroy ABM structPaul Hsieh1-0/+2
[Why] When disable driver, OS will set backlight optimization then do stop device. But this flag will cause driver to enable ABM when driver disabled. [How] Send ABM disable command before destroy ABM construct Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: dont set otg offsetJun Lei1-4/+0
move the update of otg instance outside of hw programming logic, since this is sw state, it should always be updated and should never be optimized away. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Explicitly specify update type per plane info changeNicholas Kazlauskas1-24/+44
[Why] The bit for flip addr is being set causing the determination for FAST vs MEDIUM to always return MEDIUM when plane info is provided as a surface update. This causes extreme stuttering for the typical atomic update path on Linux. [How] Don't use update_flags->raw for determining FAST vs MEDIUM. It's too fragile to changes like this. Explicitly specify the update type per update flag instead. It's not as clever as checking the bits itself but at least it's correct. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Eryk Brol <Eryk.Brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Rename EDID_BLOCK_SIZE to DC_EDID_BLOCK_SIZEJoshua Aberback2-4/+4
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Use VCP for extended colorimetryAric Cyr1-1/+3
DPRX should send the VCP extended colorimetry packet if the sink supports DPCD rev1.4 and reports the extended colorimetry bit. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Use DCN functions instead of DCEWesley Chalmers2-1/+38
[WHY] DCN code should make as few references to DCE as possible [HOW] Copy DCE110 implementation of find_first_free_match_stream_enc_for_link into DCN10 Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: Engine-specific encoder allocationWesley Chalmers10-47/+101
[WHY] From DCE110 onward, we have the ability to assign DIG BE and FE separately for any display connector type; before, we could only do this for DP. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-05-24drm/amd/display: enabling stream after HPD low to high happenedCharlene Liu4-1/+11
[Why] 1. No real HPD plug in/out but HPD happens, the driver notifies OS connection changed. 2. No display in target. When HPD goes low to high, the driver should regard as HPD and enter setmode flow. [How] In this case, even stream didn't change but still retrain. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Powered by cgit, Gruvboxed by Blaster4385.