aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-03-03Staging: et131x: Kill unused error definesAlan Cox1-18/+0
Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: kill MP_ERR_COUNTERS which is unusedAlan Cox1-9/+0
Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Kill off RX_RING_tAlan Cox4-33/+33
This completes the typedef clean up of the rx specific structures, although there is plenty do on field names and the like Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: clean up the pkt_desc_stat_t typesAlan Cox2-119/+70
Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Clean up the fbr lookup tableAlan Cox2-41/+40
All the subtypes are sane so just turn it into something struct and linux like Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Fix rx_status typingAlan Cox2-13/+12
Use the proper pointer types for the higher level pointers to the rx_status object and kill casts Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: rx_status_block_t is now cleanAlan Cox2-10/+10
So kill off the top level type and turn it into a struct Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: kill off the rx interrupt state enumAlan Cox1-5/+0
Another verbose enum we don't need Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Clean up the rx status word typesAlan Cox2-28/+10
Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Kill MAC_STAT_tAlan Cox2-13/+14
All the contents of this type are now clean, so kill the top level type as well Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Kill off MMC_tAlan Cox1-4/+4
The contents of MMC_t are clean so kill off the MMC_t typedef Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Kill off TXDMA_tAlan Cox2-5/+5
All the contents are clean so kill off the top level typedefs Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: GLOBAL_t is now sane so kill the GLOBAL_t itselfAlan Cox2-7/+5
Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: kill EXP_ROMAlan Cox1-21/+0
This is another unused type for the bin Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Kill off the rxdma typeAlan Cox2-6/+6
We have a clean struct of this now so turn the top level typedefs into a struct Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: Clean up rxdma_csrAlan Cox2-63/+41
This is another set of flags as typedef that can be cleaned up. Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: fbr_desc is now only sane typesAlan Cox2-20/+20
Clean up the typdef for fbr_desc itself so we know it is done Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: kill of FBR_WORD2Alan Cox2-18/+5
This is only used meaningfully as a definition, we never mask and fetch the bits apart Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: et131x: kill off the FBR_NUM_DES typeAlan Cox1-12/+0
This is another 10 bit value with the high bits clear, and where the type doesn't get used anywhere properly anyway Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: crystalhd: fix build on powerpcDave Airlie1-0/+1
Add necessary include to fix build on PowerPC Signed-off-by: Dave Airlie <[email protected]> Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: rtl8187se: fix if statementDan Carpenter1-1/+1
I removed a misplace semicolon. It is clear from the indentation that TxPwrTracking87SE() was only supposed to be called if CheckTxPwrTracking() returned true. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: rt{2860,2870}sta: Use request_firmware() to load firmwareBen Hutchings9-2210/+113
When originally introduced into staging, these drivers had custom firmware-loading code which checked a version number and CRC at the end of each blob. This reintroduces those checks, using crc-ccitt instead of custom code. The removed firmware will be added to the linux-firmware.git repository. Based on work by Darren Salt <[email protected]>. Signed-off-by: Ben Hutchings <[email protected]> Tested-By: Darren Salt <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: rt2870sta: constify RTUSBMultiWrite(), RTUSBFirmwareWrite()Ben Hutchings2-8/+8
These functions do not modify the data they are passed. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: serqt_usb2: Two branches the same in qt_set_termios()Roel Kluin1-1/+1
Regardless of the condition, the branches executed the same code Signed-off-by: Roel Kluin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: rt2860/sta_ioctl.c: Two branches the same in rt_ioctl_giwscan()Roel Kluin1-4/+1
Regardless of the condition, the branches execute the same code Signed-off-by: Roel Kluin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl818: Remove unneeded chanlist_len checkIan Abbott1-8/+0
For AI command testing, the driver does not need to range-check the length of the channel list as the comedi core has already checked it. Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl816: Check channel list in AI command testIan Abbott1-19/+36
Check the channel list is valid in step 5 of the AI command test. Split function check_and_setup_channel_list() in two. Also, remove unnecessary chanlist_len tests in step 3 of the AI command test as the comedi core has already checked it. Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl812: Update MUX for multi-channel AI commandIan Abbott1-3/+11
For multi-channel AI commands, the interrupt handler is missing code to switch to the next channel. Add some (untested) code to handle this. Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: adv_pci1710: Remove unneeded chanlist_len checkIan Abbott1-8/+0
For AI command testing, the driver does not need to range-check the length of the channel list as the comedi core has already checked it. Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: adv_pci1710: Correct AI scan count and channel checksIan Abbott1-0/+7
For AI commands, the internal channel list used to check incoming data was only set up partially if the channel list contained repeats. Set it up fully. Also the current scan position was not updated properly when moving a block of data from the FIFO unless a whole number of scans was moved. Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl818: Correct AI scan counting and channel checksIan Abbott1-4/+27
For AI commands, the scan counter should be updated after every scan. It was being updated after every sample except for DMA mode where it was being updated after every repeated segment of the channel list. Also AI commands with multiple channels were being terminated with an error prematurely except in DMA mode. This was because the driver was comparing channel numbers received from the hardware (combined with the sample value) with the expected channel numbers to check for a "channel dropout". This test was failing incorrectly because the driver was not keeping the current position within the (repeated segment of the) channel list up to date. Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl816: Correct AI scan countingIan Abbott1-1/+10
For AI commands, the scan counter should be updated after every scan. In DMA mode, it was being updated after every repeated segment of the channel list. In non-DMA mode, it was being updated after every sample. Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl812: Correct AI scan countingIan Abbott1-2/+6
The AI scan counter should be updated after every completed scan, not after every channel. Keep track of current channel. Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: Comedi: G1-3 status registers not read in ni_gpct_to_660x_register()Roel Kluin1-3/+3
Read from the right status register Signed-off-by: Roel Kluin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl730: Checkpatch cleanupsBenjamin Adolphi1-3/+3
This fixes all checkpatch issues in the pcl730 comedi driver. Signed-off-by: Benjamin Adolphi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl725: Checkpatch cleanupsBenjamin Adolphi1-3/+3
This fixes all checkpatch issues in the pcl725 comedi driver. Signed-off-by: Benjamin Adolphi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl724: Checkpatch cleanupsBenjamin Adolphi1-14/+12
This fixes all checkpatch issues in the pcl724 comedi driver. Signed-off-by: Benjamin Adolphi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: pcl711: Checkpatch cleanupsBenjamin Adolphi1-17/+12
This fixes some checkpatch issues in the pcl711 comedi driver. Signed-off-by: Benjamin Adolphi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: go7007: Eliminate useless codeJulia Lawall1-1/+1
The variable s is initialized twice to the same (side effect-free) expression. Drop one initialization. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: rti800: Checkpatch cleanupsBenjamin Adolphi1-21/+20
This fixes some checkpatch issues in the rti800 comedi driver. Signed-off-by: Benjamin Adolphi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: c6xdigio: Checkpatch cleanupsBenjamin Adolphi1-29/+28
This fixes some checkpatch issues and some spelling mistakes in the c6xdigio comedi driver. Signed-off-by: Benjamin Adolphi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: comedi: adq12b: Checkpatch cleanupsBenjamin Adolphi1-24/+24
This fixes some checkpatch issues in the adq12b comedi driver. Signed-off-by: Benjamin Adolphi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: rtl8192u: ieee80211: CurrentMPDUDensity assigned to itself in ↵Roel Kluin1-1/+1
HTUseDefaultSetting() CurrentMPDUDensity was designed to itself. Signed-off-by: Roel Kluin <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03staging: sm7xx: remove the buggy 2D acceleration supportWu Zhangjin5-1635/+11
When scrolling the screen on the console with the 2D acceleration support, the whole system may hang. for example, when copying some files from another machine to YeeLoong netbook with the sm7xx video driver via scp and when the screen output is enabled, the system may hang. Before the bug is fixed, remove the 2D acceleration! Signed-off-by: Wu Zhangjin <[email protected]> Cc: Teddy Wang <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03staging: fix typos "couter" -> "counter"Uwe Kleine-König2-6/+6
This patch was generated by git grep -l 'couter' drivers/staging | xargs -r perl -p -i -e 's/couter/counter/' Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03staging: fix typos "aquire" -> "acquire"Uwe Kleine-König5-5/+5
This patch was generated by git grep -E -i -l '[Aa]quire' drivers/staging | xargs -r perl -p -i -e 's/([Aa])quire/$1cquire/' Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03staging: fix typos "selct" -> "select"Uwe Kleine-König1-2/+2
This patch was generated by git grep -E -i -l 's(le|el)ct' drivers/staging | xargs -r perl -p -i -e 's/([Ss])(le|el)ct/$1elect/' Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03staging: fix typos "enalbe" -> "enable"Uwe Kleine-König4-4/+4
This patch was generated by git grep -E -l 'enalbe' drivers/staging | xargs -r perl -p -i -e 's/enalbe/enable/g' Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03staging: wlags49: don't use custom implementation of atoi()Andy Shevchenko4-90/+39
Kernel has its own method called simple_strtoul() to do such things. Here we are using simple_strtoul(value, NULL, 0) because in original function the recognized base is 10 or 16 and input data is assumed to be unsigned. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-03Staging: sep: declare MODULE_FIRMWAREBen Hutchings1-0/+3
Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.