aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-08-17ahci_xgene: Removing NCQ support from the APM X-Gene SoC AHCI SATA Host ↵Suman Tripathi1-2/+2
Controller driver. This patch removes the NCQ support from the APM X-Gene SoC AHCI Host Controller driver as it doesn't support it. Signed-off-by: Loc Ho <[email protected]> Signed-off-by: Suman Tripathi <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: [email protected]
2014-08-16net: phy: smsc: move smsc_phy_config_init reset part in a soft_reset functionGwenhael Goavec-Merou1-12/+21
On the one hand, phy_device.c provides a generic reset function if the phy driver does not provide a soft_reset pointer. This generic reset does not take into account the state of the phy, with a potential failure if the phy is in powerdown mode. On the other hand, smsc driver provides a function with both correct reset behaviour and configuration. This patch moves the reset part into a new smsc_phy_reset function and provides the soft_reset pointer to have a correct reset behaviour by default. Signed-off-by: Gwenhael Goavec-Merou <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-08-16Merge branch 'master' of ↵David S. Miller2-13/+33
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-08-15 This series contains fixes to i40e only. Anjali provides two fixes for i40e, first adds a check for non-active VF before sending admin queue messages to the VFS. This resolves a potential kernel panic which would happen whenever we got a Tx hang and there were VFS that were not up or enabled. The second fix adds additional checks so that we do try to access a VF that is not up or enabled which would dereference a null pointer. Jesse fixes a i40e PTP bug where the hang detection routine was never being run when PTP was enabled. ==================== Signed-off-by: David S. Miller <[email protected]>
2014-08-16net: phy: bcm7xxx: remove suspend callback for 28nm PHYsFlorian Fainelli1-4/+1
BCM7xxx internal Gigabit PHY on 28nm process do not need anything special to be done during suspend, remove the suspend callback since it might be harmful rather than useful. While at it, update the comment above bcm7xxx_suspend() to reflect that it applies only to 40nm and 65nm process PHY devices. Fixes: b560a58c45c6 ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-08-16net: phy: bcm7xxx: re-advertise all supported modes out of suspendFlorian Fainelli1-3/+20
The BCM7xxx internal Gigabit PHYs on 28nm process platforms come out reset without any half-duplex or "hub" compatible advertised modes, which was causing auto-negotiation issues coming out of S3 suspend/resume, we just could not establish a link with a half-duplex only link partner. Make sure that the resume function properly re-configures the PHY device to advertise all supported modes. Fixes: b560a58c45c6 ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-08-16net: phy: bcm7xxx: remove 28nm wildcard entryFlorian Fainelli1-14/+0
A wildcard entry with the 32-bits OUI 0x600d8400 was added as part of the BCM7xxx internal PHY driver, but that entry might match other PHYs that are not covered by this driver, so let's just remove it. Fixes: b560a58c45c6 ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-08-16spi: rspi: Fix leaking of unused DMA descriptorsGeert Uytterhoeven1-36/+58
If dmaengine_prep_slave_sg() or dmaengine_submit() fail, we may leak unused DMA descriptors. As per Documentation/dmaengine.txt, once a DMA descriptor has been obtained, it must be submitted. Hence: - First prepare and submit all DMA descriptors, - Prepare the SPI controller for DMA, - Start DMA by calling dma_async_issue_pending(), - Make sure to call dmaengine_terminate_all() on all descriptors that haven't completed. Reported-by: Laurent Pinchart <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-08-16spi: sh-msiof: Fix leaking of unused DMA descriptorsGeert Uytterhoeven1-33/+38
If dmaengine_prep_slave_sg() or dmaengine_submit() fail, we may leak unused DMA descriptors. As per Documentation/dmaengine.txt, once a DMA descriptor has been obtained, it must be submitted. Hence: - First prepare and submit all DMA descriptors, - Prepare the SPI controller for DMA, - Start DMA by calling dma_async_issue_pending(), - Make sure to call dmaengine_terminate_all() on all descriptors that haven't completed. Reported-by: Laurent Pinchart <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2014-08-16Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds21-107/+529
Pull x86 platform driver updates from Matthew Garrett: "A moderate number of changes, but nothing awfully significant. A lot of const cleanups, some reworking and additions to the rfkill quirks in the asus driver, a new driver for generating falling laptop events on Toshibas and some misc fixes. Maybe vendors have stopped inventing things" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits) platform/x86: Enable build support for toshiba_haps Documentation: Add file about toshiba_haps module platform/x86: Toshiba HDD Active Protection Sensor asus-nb-wmi: Add wapf4 quirk for the U32U alienware-wmi: make hdmi_mux enabled on case-by-case basis ideapad-laptop: Constify DMI table and other r/o variables asus-nb-wmi.c: Rename x401u quirk to wapf4 compal-laptop: correct invalid hwmon name toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list toshiba_acpi: Add extra check to backlight code Fix log message about future removal of interface ideapad-laptop: Disable touchpad interface on Yoga models asus-nb-wmi: Add wapf4 quirk for the X550CC intel_ips: Make ips_mcp_limits variables static thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst hp-wmi: Add missing __init annotations to initialization code hp_accel: Constify ACPI and DMI tables fujitsu-tablet: Mark DMI callbacks as __init code dell-laptop: Mark dell_quirks[] DMI table as __initconst ...
2014-08-16Merge branch 'release' of ↵Linus Torvalds1-1/+76
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull idle update from Len Brown: "Two Intel-platform-specific updates to intel_idle, and a cosmetic tweak to the turbostat utility" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: tweak whitespace in output format intel_idle: Broadwell support intel_idle: Disable Baytrail Core and Module C6 auto-demotion
2014-08-16Merge branch 'rng-queue' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio Pull virtio-rng update from Amit Shah: "Add derating factor for use by hwrng core Sending directly to you with the commit log changes Ted Ts'o pointed out. Not sure if Rusty's back after his travel, but this already has his s-o-b" * 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio: virtio: rng: add derating factor for use by hwrng core
2014-08-16platform/x86: Enable build support for toshiba_hapsAzael Avalos2-0/+20
Makefile and Kconfig build support patch for the newly introduced kernel module toshiba_haps. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16platform/x86: Toshiba HDD Active Protection SensorAzael Avalos1-0/+265
This driver adds support for the built-in accelereometer found on recent Toshiba laptops with HID TOS620A. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and reseting the HDD protection interface. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the U32UHans de Goede1-0/+14
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the U32U needs wapf=4 too. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16alienware-wmi: make hdmi_mux enabled on case-by-case basisMario Limonciello1-2/+20
Not all HW supporting WMAX method will support the HDMI mux feature. Explicitly quirk the HW that does support it. Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16ideapad-laptop: Constify DMI table and other r/o variablesMathias Krause1-2/+2
Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table and the ideapad_attribute_group attribute group. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <[email protected]> Cc: Ike Panhc <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-nb-wmi.c: Rename x401u quirk to wapf4Hans de Goede1-13/+13
The actual x401u does not use the so named x401u quirk but the x55u quirk. All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to stop the confusion. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16compal-laptop: correct invalid hwmon nameRoald Frederickx1-1/+1
Change the name of the hwmon interface from "compal-laptop" to "compal". A dash is an invalid character for a hwmon name and caused the call to hwmon_device_register_with_groups() to fail. Signed-off-by: Roald Frederickx <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi listAzael Avalos1-0/+7
The Toshiba Qosmio X75-A series models also come with the new keymap layout. This patch adds this model to the alt_keymap_dmi list, along with an extra key found on these models. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16toshiba_acpi: Add extra check to backlight codeAzael Avalos1-4/+17
Some Toshiba models (most notably Qosmios) come with an incomplete backlight method where the AML code doesn't check for write or read commands and always returns HCI_SUCCESS and the actual brightness (and in some cases the max brightness), thus allowing the backlight interface to be registered without write support. This patch changes the set_lcd_brightness function, checking the returned values for values greater than zero to avoid registering a broken backlight interface. Signed-off-by: Azael Avalos <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16Fix log message about future removal of interfaceMartin Kepplinger1-3/+3
If this is going away, it won't be in 2012. Signed-off-by: Martin Kepplinger <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16ideapad-laptop: Disable touchpad interface on Yoga modelsHans de Goede1-0/+27
Yoga models don't offer touchpad ctrl through the ideapad interface, causing ideapad_sync_touchpad_state to send wrong touchpad enable/disable events. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the X550CCHans de Goede1-0/+9
As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681 the X550CC needs wapf=4 too. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16intel_ips: Make ips_mcp_limits variables staticMathias Krause1-3/+3
These variables don't need to be visible outside of this compilation unit, make them static. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdataMathias Krause1-2/+2
Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata, as snd_ctl_new1() will copy the relevant parts, so there is no need to keep the master copies around after initialization. Signed-off-by: Mathias Krause <[email protected]> Cc: Henrique de Moraes Holschuh <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconstMathias Krause1-5/+5
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 1.5 kB. In turn, the callback functions can be marked with __init, too. Signed-off-by: Mathias Krause <[email protected]> Cc: Jonathan Woithe <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16hp-wmi: Add missing __init annotations to initialization codeMathias Krause1-3/+3
These functions are only called from other initialization routines, so can be marked __init, too. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16hp_accel: Constify ACPI and DMI tablesMathias Krause1-2/+2
Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI tables. There's no need to have them writeable during runtime. Signed-off-by: Mathias Krause <[email protected]> Cc: Eric Piel <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16fujitsu-tablet: Mark DMI callbacks as __init codeMathias Krause1-3/+3
The DMI table is already marked as __initconst, so can be the callback functions as they're only used in that context. Signed-off-by: Mathias Krause <[email protected]> Cc: Robert Gerlach <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16dell-laptop: Mark dell_quirks[] DMI table as __initconstMathias Krause1-3/+3
The dell_quirks[] DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released afterwards -- roughly 5.7 kB. In turn, the callback function can be marked with __init, too. Also the touchpad_led_init() function can be marked __init as it's only referenced from dell_init() -- an __init function. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16eeepc-wmi: Constify asus_quirks[] DMI tableMathias Krause1-1/+1
Constify the asus_quirks[] DMI table. There's no need to have it writeable during runtime. Signed-off-by: Mathias Krause <[email protected]> Cc: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16acer-wmi: Mark init data and code as suchMathias Krause1-20/+21
Quite a lot of code and data of acer-wmi.c is only ever used during initialization. Mark those accordingly -- and constify, where appropriate -- so the memory can be released afterwards. All in all those changes move ~10 kB of code and data to the .init sections, marking them for release after initialization has finished. Signed-off-by: Mathias Krause <[email protected]> Cc: "Lee, Chun-Yi" <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-nb-wmi: Constify asus_quirks[] DMI tableMathias Krause1-1/+1
Constify the asus_quirks[] DMI table. There's no need to have it writeable during runtime. Signed-off-by: Mathias Krause <[email protected]> Cc: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16alienware-wmi: Mark DMI table as __initconstMathias Krause1-2/+2
The DMI table is only ever used during initialization. Mark it as __initconst so its memory can be released appropriately. In turn, the callback function can be marked with __init, too. Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16acer-wmi: Hide acer_{suspend,resume} for !CONFIG_PM_SLEEPMathias Krause1-0/+5
Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP to get rid of the following warnings: ../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function] ../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function] Signed-off-by: Mathias Krause <[email protected]> Cc: "Lee, Chun-Yi" <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16acer-wmi: Mark acer_wmi_keymap[] as __initconstMathias Krause1-1/+1
sparse_keymap_setup() will make a copy of the keymap, so we can release the master copy after initialization. Signed-off-by: Mathias Krause <[email protected]> Cc: "Lee, Chun-Yi" <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16WMI: Remove unnecessary null testHimangi Saraogi1-4/+0
This patch removes the null test on block. block is initialized at the beginning of the function to &wblock->gblock. Since wblock is dereferenced prior to the null test, wblock must be a valid pointer, and &wblock->gblock cannot be null. The following Coccinelle script is used for detecting the change: @r@ expression e,f; identifier g,y; statement S1,S2; @@ *e = &f->g <+... f->y ...+> *if (e != NULL || ...) S1 else S2 Signed-off-by: Himangi Saraogi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16drivers/platform/x86/thinkpad_acpi.c: don't test unsigned int for negativityAndrey Utkin1-1/+1
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80231 Reported-by: David Binderman <[email protected]> Signed-off-by: Andrey Utkin <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-nb-wmi: Add wapf4 quirk for the X550CLHans de Goede1-0/+9
As reported here: https://bugs.launchpad.net/bugs/1277959 the X550CL needs wapf=4 too. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-nb-wmi: Add ASUSTeK COMPUTER INC. X200CAAceLan Kao1-0/+13
BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to control the wifi and wifi-led status. But, it'll lead to bt status error if asus-wmi driver controls bt as well. So, for X200CA, asus-wmi driver controls wifi status only and have to set wapf to 1. Signed-off-by: AceLan Kao <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-wmi: control wlan-led if wapf > 0AceLan Kao1-2/+2
Wifi will be controlled by asus-wmi driver when wapf > 0 So, controls the wifi-led when wapf > 0 Signed-off-by: AceLan Kao <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-wmi: backlight_init: Stop treating -ENODEV as if its not an errorHans de Goede1-4/+1
When bl_power support got added to asus-wmi, the error handling for it was written to ignore -ENODEV, to avoid not registering a backlight interface for models which have no bl_power control, but do have brightness control. At the same time the error handling for brightness_max was modified to do the same, this is wrong, when there is no brightness_max asus-wmi should not register a backlight interface. Note the caller of asus_wmi_backlight_init already special cases -ENODEV, and will not cause the wmi driver regristration to fail because of a -ENODEV return from asus_wmi_backlight_init. https://bugzilla.redhat.com/show_bug.cgi?id=1097436 Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16asus-wmi: Disable acpi-video backlight on desktop machinesHans de Goede1-0/+7
Some Asus motherboards for desktop PC-s export an acpi-video interface advertising backlight support. Test the dmi chassis-type and tell acpi-video to not register a backlight interface on desktops. https://bugzilla.redhat.com/show_bug.cgi?id=1097436 Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16ideapad-laptop: Change Lenovo Yoga 2 series rfkill handlingHans de Goede1-14/+27
It seems that the same problems which lead to adding an rfkill blacklist and putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13 and Lenovo Yoga 2 Pro too: https://bugzilla.redhat.com/show_bug.cgi?id=1021036 https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612 Testing has shown that the firmware rfkill settings are persistent over reboots. So blacklisting the driver is not good enough, if the wifi is blocked at the firmware level the wifi needs to be explictly unblocked through the ideapad-laptop interface. And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices with hardware kill switch reports the hardware switch state, needs to be explictly set to 1 (radio enabled / not blocked). So this patch does 3 things to get proper rfkill handling on these models: 1) Instead of blacklisting the rfkill functionality, which means that people with a firmware blocked wifi get stuck in that situation, ignore the value reported by the not present hardware rfkill switch, as this is what is causing ideapad-laptop to wrongly report all radios as hardware blocks. But do register the rfkill interfaces so that the user can soft [un]block them. 2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1 3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2 series is affected. Yoga 2 11: Reported-and-tested-by: Vincent Gerris <[email protected]> Yoga 2 13: Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044> Yoga 2 Pro: Reported-and-tested-by: Peter F. Patel-Schneider <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16thinkpad_acpi: Update mapping for F12 hotkey on *40 models to KEY_FILEHans de Goede1-1/+1
The new keyboard found on the *40 models is also being sold as a standalone keyboard (with trackpoint): http://shop.lenovo.com/us/en/itemdetails/0B47189/460/60AC6A0372B14F5BA7B12F1FF88E33C7 This uses a standard HUT code for the F12 key with the 6 square boxes on it, which gets mapped to KEY_FILE by the kernel. Change the mapping done of identical laptop key done by thinkpad_acpi to also send KEY_FILE for consistency. Cc: Jamie Lentin <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16eeepc-laptop: rename _set and _get arguments in macroPaul Bolle1-4/+4
The _set and _get arguments to the EEEPC_CREATE_SENSOR_ATTR() macro are confusingly named: _set should be _get and vice versa. Rename these arguments. Drop the trailing semicolon from that macro, while we're at it. Signed-off-by: Paul Bolle <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16fujitsu-laptop: Clear build warningsJean Delvare1-5/+4
When CONFIG_FUJITSU_LAPTOP_DEBUG is disabled and W=1, the fujitsu-laptop driver builds with the following warnings: drivers/platform/x86/fujitsu-laptop.c: In function "bl_update_status": drivers/platform/x86/fujitsu-laptop.c:409:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body] ret); ^ drivers/platform/x86/fujitsu-laptop.c:418:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body] ret); ^ Rework the debug printk helper macro to get rid of these. I verified that this change has no effect on the generated binary, both in the debug and non-debug case. Signed-off-by: Jean Delvare <[email protected]> Acked-by: Jonathan Woithe <[email protected]> Cc: Matthew Garrett <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16platform/x86/toshiba-apci.c possible bad if test?Nick1-1/+1
Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16sony-laptop: fix doesn't work lid resume settings on Vaio Promog4221-1/+1
Signed-off-by: mog422 <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2014-08-16WAPF 4 for ASUSTeK COMPUTER INC. X75VBP WLAN ON.poma1-0/+9
The 'asus-nb-wmi' WAPF parameter must be set to 4, so the internal Wireless LAN device is operational. Signed-off-by: poma <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.