| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use GCE_CTRL_BY_SW definition instead of number
Signed-off-by: Yongqiang Niu <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: CK Hu <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
Directly get the match data with device_get_match_data().
Signed-off-by: ye xingchen <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
Defaulting the build to ARCH_K3 for the TI message manager driver.
Signed-off-by: Nicolas Frayer <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
Enable SM4250 APCS IPC support by adding the compatible.
It reuses msm8994_apcs_data.
Signed-off-by: Bhupesh Sharma <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-12-15 (igc)
Muhammad Husaini Zulkifli says:
This patch series fixes bugs for the Time-Sensitive Networking(TSN)
Qbv Scheduling features.
An overview of each patch series is given below:
Patch 1: Using a first flag bit to schedule a packet to the next cycle if
packet cannot fit in current Qbv cycle.
Patch 2: Enable strict cycle for Qbv scheduling.
Patch 3: Prevent user to set basetime less than zero during tc config.
Patch 4: Allow the basetime enrollment with zero value.
Patch 5: Calculate the new end time value to exclude the time interval that
exceed the cycle time as user can specify the cycle time in tc config.
Patch 6: Resolve the HW bugs where the gate is not fully closed.
---
This contains the net patches from this original pull request:
https://lore.kernel.org/netdev/[email protected]/
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
start_task() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:
start_task()
create_singlethread_workqueue() # failed, led_wq is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL.
Fixes: 3499495205a6 ("[PARISC] Use work queue in LED/LCD driver instead of tasklet.")
Signed-off-by: Shang XiaoJing <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Cc: <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
"New Feature:
- Randomize the per-cpu entry areas
Cleanups:
- Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it
- Move to "native" set_memory_rox() helper
- Clean up pmd_get_atomic() and i386-PAE
- Remove some unused page table size macros"
* tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
x86/mm: Ensure forced page table splitting
x86/kasan: Populate shadow for shared chunk of the CPU entry area
x86/kasan: Add helpers to align shadow addresses up and down
x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names
x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area
x86/mm: Recompute physical address for every page of per-CPU CEA mapping
x86/mm: Rename __change_page_attr_set_clr(.checkalias)
x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias()
x86/mm: Untangle __change_page_attr_set_clr(.checkalias)
x86/mm: Add a few comments
x86/mm: Fix CR3_ADDR_MASK
x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros
mm: Convert __HAVE_ARCH_P..P_GET to the new style
mm: Remove pointless barrier() after pmdp_get_lockless()
x86/mm/pae: Get rid of set_64bit()
x86_64: Remove pointless set_64bit() usage
x86/mm/pae: Be consistent with pXXp_get_and_clear()
x86/mm/pae: Use WRITE_ONCE()
x86/mm/pae: Don't (ab)use atomic64
mm/gup: Fix the lockless PMD access
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi
Pull HSI updates from Sebastian Reichel:
- misc small fixes
* tag 'hsi-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
HSI: omap_ssi_core: Fix error handling in ssi_init()
headers: Remove some left-over license text in include/uapi/linux/hsi/
HSI: omap_ssi_core: fix possible memory leak in ssi_probe()
HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()
HSI: ssi_protocol: Fix return type of ssip_pn_xmit()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- bq25890: add charge voltage/current support
- bd99954: convert to linear range
- convert all i2c drivers to use probe_new
- misc fixes and cleanups
* tag 'for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits)
power: supply: fix null pointer dereferencing in power_supply_get_battery_info
power: supply: bq25890: Fix usb-notifier probe and remove races
power: supply: bq25890: Ensure pump_express_work is cancelled on remove
power: supply: Fix refcount leak in rk817_charger_probe
power: supply: bq25890: Only use pdata->regulator_init_data for vbus
power: supply: ab8500: Fix error handling in ab8500_charger_init()
power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe()
power: supply: z2_battery: Fix possible memleak in z2_batt_probe()
power: supply: z2_battery: Convert to i2c's .probe_new()
power: supply: ucs1002: Convert to i2c's .probe_new()
power: supply: smb347: Convert to i2c's .probe_new()
power: supply: sbs-manager: Convert to i2c's .probe_new()
power: supply: sbs: Convert to i2c's .probe_new()
power: supply: rt9455: Convert to i2c's .probe_new()
power: supply: rt5033_battery: Convert to i2c's .probe_new()
power: supply: max17042_battery: Convert to i2c's .probe_new()
power: supply: max17040: Convert to i2c's .probe_new()
power: supply: max14656: Convert to i2c's .probe_new()
power: supply: ltc4162-l: Convert to i2c's .probe_new()
power: supply: ltc2941: Convert to i2c's .probe_new()
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add Advantech EC watchdog driver
- Add support for MT6795 Helio X10 watchdog and toprgu
- Add support for MT8188 watchdog device
- Remove #ifdef guards for PM related functions
- Other fixes and improvements
* tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: aspeed: Enable pre-timeout interrupt
watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
watchdog: rn5t618: add support for read out bootstatus
watchdog: kempld: Remove #ifdef guards for PM related functions
watchdog: omap: Remove #ifdef guards for PM related functions
watchdog: twl4030: Remove #ifdef guards for PM related functions
watchdog: at91rm9200: Remove #ifdef guards for PM related functions
watchdog: Add Advantech EC watchdog driver
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173
dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795
dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema
watchdog: mediatek: mt8188: add wdt support
dt-bindings: reset: mt8188: add toprgu reset-controller header file
dt-bindings: watchdog: Add compatible for MediaTek MT8188
watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Lee Jones offered his help with maintaining LEDs, thanks a lot.
Plus, there are some bugfixes as a bonus"
* tag 'leds-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: MAINTAINERS: include dt-bindings headers
leds: qcom,pm8058-led: Convert to DT schema
leds: use sysfs_emit() to instead of scnprintf()
leds: is31fl319x: Fix setting current limit for is31fl319{0,1,3}
MAINTAINERS: Add additional co-maintainer to LEDs
leds: lp5523: fix out-of-bounds bug in lp5523_selftest()
dt-bindings: leds: Add 'cpuX' to 'linux,default-trigger'
led: qcom-lpg: Fix sleeping in atomic
leds: max8997: Don't error if there is no pdata
leds: lp55xx: remove variable j
leds-pca955x: Remove the unused function pca95xx_num_led_regs()
|
|
Pull rdma fixes from Jason Gunthorpe:
"Fix two build warnings on 32 bit platforms
It seems the linux-next CI and 0-day bot are not testing enough 32 bit
configurations, as soon as you merged the rdma pull request there were
two instant reports of warnings on these sytems that I would have
thought should have been covered by time in linux-next
Anyhow, here are the fixes so people don't hit problems with -Werror"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix pointer cast warning
RDMA/rxe: Fix compile warnings on 32-bit
|
|
The #ifdef check is incorrect and leads to a warning:
drivers/net/ethernet/ti/am65-cpsw-nuss.c:1679:13: error: 'am65_cpsw_nuss_remove_rx_chns' defined but not used [-Werror=unused-function]
1679 | static void am65_cpsw_nuss_remove_rx_chns(void *data)
It's better to remove the #ifdef here and use the modern
SYSTEM_SLEEP_PM_OPS() macro instead.
Fixes: 24bc19b05f1f ("net: ethernet: ti: am65-cpsw: Add suspend/resume support")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Alexander Duyck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:
drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
32 | return virt_to_page((void *)paddr);
| ^
Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.
Fixes: 0d1b756acf60 ("RDMA/siw: Pass a pointer to virt_to_page()")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Bernard Metzler <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
|
|
This was a mismerge of a semantic conflict in my merge of the driver
core updates, where commit ff62b8e6588f ("driver core: make struct
class.devnode() take a const *") changed the devnode function pointer
type. In the meantime, the drm tree I merged earlier had introduced a
new use of that in commit 8bf4889762a8 ("drivers/accel: define kconfig
and register a new major").
And of course this happens when I'm traveling with my laptop, and thus
didn't do a full allmodconfig build between every pull and before
pushing my work out.
So I only noticed later as I was doing my full build.
Brown-paper-bag-by: Linus Torvalds <[email protected]>
Fixes: 71a7507afbc3 Merge tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Signed-off-by: Linus Torvalds <[email protected]>
|
|
I do not read a strict requirement on /chosen node in either ePAPR or in
Documentation/devicetree. Help text for CONFIG_CMDLINE and
CONFIG_CMDLINE_EXTEND doesn't make their behavior explicitly dependent on
the presence of /chosen or the presense of /chosen/bootargs.
However the early check for /chosen and bailing out in
early_init_dt_scan_chosen() skips CONFIG_CMDLINE handling which is not
really related to /chosen node or the particular method of passing cmdline
from bootloader.
This leads to counterintuitive combinations (assuming
CONFIG_CMDLINE_EXTEND=y):
a) bootargs="foo", CONFIG_CMDLINE="bar" => cmdline=="foo bar"
b) /chosen missing, CONFIG_CMDLINE="bar" => cmdline==""
c) bootargs="", CONFIG_CMDLINE="bar" => cmdline==" bar"
Move CONFIG_CMDLINE handling outside of early_init_dt_scan_chosen() so that
cases b and c above result in the same cmdline.
Signed-off-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.2-rc1.
The "big" change in here is the addition of a new macro,
container_of_const() that will preserve the "const-ness" of a pointer
passed into it.
The "problem" of the current container_of() macro is that if you pass
in a "const *", out of it can comes a non-const pointer unless you
specifically ask for it. For many usages, we want to preserve the
"const" attribute by using the same call. For a specific example, this
series changes the kobj_to_dev() macro to use it, allowing it to be
used no matter what the const value is. This prevents every subsystem
from having to declare 2 different individual macros (i.e.
kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce
the const value at build time, which having 2 macros would not do
either.
The driver for all of this have been discussions with the Rust kernel
developers as to how to properly mark driver core, and kobject,
objects as being "non-mutable". The changes to the kobject and driver
core in this pull request are the result of that, as there are lots of
paths where kobjects and device pointers are not modified at all, so
marking them as "const" allows the compiler to enforce this.
So, a nice side affect of the Rust development effort has been already
to clean up the driver core code to be more obvious about object
rules.
All of this has been bike-shedded in quite a lot of detail on lkml
with different names and implementations resulting in the tiny version
we have in here, much better than my original proposal. Lots of
subsystem maintainers have acked the changes as well.
Other than this change, included in here are smaller stuff like:
- kernfs fixes and updates to handle lock contention better
- vmlinux.lds.h fixes and updates
- sysfs and debugfs documentation updates
- device property updates
All of these have been in the linux-next tree for quite a while with
no problems"
* tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits)
device property: Fix documentation for fwnode_get_next_parent()
firmware_loader: fix up to_fw_sysfs() to preserve const
usb.h: take advantage of container_of_const()
device.h: move kobj_to_dev() to use container_of_const()
container_of: add container_of_const() that preserves const-ness of the pointer
driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion.
driver core: fix up missed scsi/cxlflash class.devnode() conversion.
driver core: fix up some missing class.devnode() conversions.
driver core: make struct class.devnode() take a const *
driver core: make struct class.dev_uevent() take a const *
cacheinfo: Remove of_node_put() for fw_token
device property: Add a blank line in Kconfig of tests
device property: Rename goto label to be more precise
device property: Move PROPERTY_ENTRY_BOOL() a bit down
device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*()
kernfs: fix all kernel-doc warnings and multiple typos
driver core: pass a const * into of_device_uevent()
kobject: kset_uevent_ops: make name() callback take a const *
kobject: kset_uevent_ops: make filter() callback take a const *
kobject: make kobject_namespace take a const *
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc and other driver subsystem changes
for 6.2-rc1. Nothing earth-shattering in here at all, just a lot of
new driver development and minor fixes.
Highlights include:
- fastrpc driver updates
- iio new drivers and updates
- habanalabs driver updates for new hardware and features
- slimbus driver updates
- speakup module parameters added to aid in boot time configuration
- i2c probe_new conversions for lots of different drivers
- other small driver fixes and additions
One semi-interesting change in here is the increase of the number of
misc dynamic minors available to 1048448 to handle new huge-cpu
systems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (521 commits)
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
chardev: fix error handling in cdev_device_add()
mcb: mcb-parse: fix error handing in chameleon_parse_gdd()
drivers: mcb: fix resource leak in mcb_probe()
coresight: etm4x: fix repeated words in comments
coresight: cti: Fix null pointer error on CTI init before ETM
coresight: trbe: remove cpuhp instance node before remove cpuhp state
counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update
misc: fastrpc: Add dma_mask to fastrpc_channel_ctx
misc: fastrpc: Add mmap request assigning for static PD pool
misc: fastrpc: Safekeep mmaps on interrupted invoke
misc: fastrpc: Add support for audiopd
misc: fastrpc: Rework fastrpc_req_munmap
misc: fastrpc: Use fastrpc_map_put in fastrpc_map_create on fail
misc: fastrpc: Add fastrpc_remote_heap_alloc
misc: fastrpc: Add reserved mem support
misc: fastrpc: Rename audio protection domain to root
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the "big" set of tty/serial driver changes for 6.2-rc1.
As in previous kernel releases, nothing big here at all, just some
small incremental serial/tty layer cleanups and some individual driver
additions and fixes. Highlights are:
- serial helper macros from Jiri Slaby to reduce the amount of
duplicated code in serial drivers
- api cleanups and consolidations from Ilpo Järvinen in lots of
serial drivers
- the usual set of n_gsm fixes from Daniel Starke as that code gets
exercised more
- TIOCSTI is finally able to be disabled if requested (security
hardening feature from Kees Cook)
- fsl_lpuart driver fixes and features added
- other small serial driver additions and fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (97 commits)
serial: atmel: don't stop the transmitter when doing PIO
serial: atmel: cleanup atmel_start+stop_tx()
tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API
serial: sunsab: Fix error handling in sunsab_init()
serial: altera_uart: fix locking in polling mode
serial: pch: Fix PCI device refcount leak in pch_request_dma()
tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused
tty: serial: fsl_lpuart: Add runtime pm support
tty: serial: fsl_lpuart: enable wakeup source for lpuart
serdev: Replace poll loop by readx_poll_timeout() macro
tty: synclink_gt: unwind actions in error path of net device open
serial: stm32: move dma_request_chan() before clk_prepare_enable()
dt-bindings: serial: xlnx,opb-uartlite: Drop 'contains' from 'xlnx,use-parity'
serial: pl011: Do not clear RX FIFO & RX interrupt in unthrottle.
serial: amba-pl011: avoid SBSA UART accessing DMACR register
tty: serial: altera_jtaguart: remove struct altera_jtaguart
tty: serial: altera_jtaguart: use uart_port::read_status_mask
tty: serial: altera_jtaguart: remove unused altera_jtaguart::sigs
tty: serial: altera_jtaguart: remove flag from altera_jtaguart_rx_chars()
n_tty: Rename tail to old_tail in n_tty_read()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the large set of staging driver changes for 6.2-rc1.
Another round of cleanups for staging drivers with no big additions.
Overall more lines were removed than added, always a nice sign, with
nothing happening in here other than general coding style cleanups and
minor fixes in the drivers. Full, boring, details are in the shortlog.
All of these have been in linux-next for a while with no reported
problems"
* tag 'staging-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (253 commits)
vme: Use root_device_register() not underlined version
staging: rtl8192e: Fix spelling mistake "ContryIE" -> "CountryIE"
vme: Fix error not catched in fake_init()
staging: vme_user: remove multiple blank lines
staging: r8188eu: use subtype helper in rtw_check_bcn_info
staging: r8188eu: use subtype helpers in collect_bss_info
staging: r8188eu: remove unused da parameter
staging: r8188eu: merge two probereq_p2p functions
staging: r8188eu: simplify err handling for unknown station
staging: r8188eu: handle the non-ap case first
staging: r8188eu: move bBusyTraffic update
staging: r8188eu: read reason code from ieee80211_mgmt
staging: r8188eu: use ieee80211_mgmt to parse addresses
staging: r8188eu: remove a variable
staging: r8188eu: simplify error handling for missing station
staging: r8188eu: stop beacon processing if kmalloc fails
staging: r8188eu: exit if beacon is not from our bss
staging: r8188eu: simplify update_sta_support_rate params
staging: r8188eu: use ie buffer in update_beacon_info
staging: r8188eu: pass only ies to process_p2p_ps_ie
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the large set of USB and Thunderbolt driver changes for
6.2-rc1. Overall, thanks to the removal of a driver, more lines were
removed than added, a nice change. Highlights include:
- removal of the sisusbvga driver that was not used by anyone anymore
- minor thunderbolt driver changes and tweaks
- chipidea driver updates
- usual set of typec driver features and hardware support added
- musb minor driver fixes
- fotg210 driver fixes, bringing that hardware back from the "dead"
- minor dwc3 driver updates
- addition, and then removal, of a list.h helper function for many
USB and other subsystem drivers, that ended up breaking the build.
That will come back for 6.3-rc1, it missed this merge window.
- usual xhci updates and enhancements
- usb-serial driver updates and support for new devices
- other minor USB driver updates
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits)
usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags
usb: dwc2: power on/off phy for peripheral mode in dual-role mode
usb: dwc2: disable lpm feature on Rockchip SoCs
dt-bindings: usb: mtk-xhci: add support for mt7986
usb: dwc3: core: defer probe on ulpi_read_id timeout
usb: ulpi: defer ulpi_register on ulpi_read_id timeout
usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
dt-bindings: vendor-prefixes: add Genesys Logic
usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe()
usb: typec: tipd: Set mode of operation for USB Type-C connector
usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST
usb: musb: remove extra check in musb_gadget_vbus_draw
usb: gadget: uvc: Prevent buffer overflow in setup handler
usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init
usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()
usb: storage: Add check for kcalloc
USB: sisusbvga: use module_usb_driver()
USB: sisusbvga: rename sisusb.c to sisusbvga.c
USB: sisusbvga: remove console support
...
|
|
Power reset maybe generate unexpected signal. In order to avoid
the glitch issue, we need to enable isolation first to guarantee the
stable signal when power reset is triggered.
Fixes: 59b644b01cf4 ("soc: mediatek: Add MediaTek SCPSYS power domains")
Signed-off-by: Chun-Jie Chen <[email protected]>
Signed-off-by: Allen-KH Cheng <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Miles Chen <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Matthias Brugger <[email protected]>
|
|
Russell King correctly pointed out that the MAC_2500FD capability is
already added for port 5 (if not in RGMII mode) and port 6 (which only
supports SGMII) by mt7531_mac_port_get_caps. Remove the reduntant
setting of this capability flag which was added by a previous commit.
Fixes: e19de30d2080 ("net: dsa: mt7530: add support for in-band link status")
Reported-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Daniel Golle <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core got a new helper 'i2c_client_get_device_id()', designware got
some bigger updates, the rest is driver updates all over the place"
* tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (41 commits)
i2c: ismt: Fix an out-of-bounds bug in ismt_access()
i2c: mux: reg: check return value after calling platform_get_resource()
i2c: xiic: Make sure to disable clock on .remove()
i2c: hisi: Add support to get clock frequency from clock
i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
i2c: slave-eeprom: Convert to i2c's .probe_new()
i2c: mux: pca954x: Convert to i2c's .probe_new()
drivers/i2c: use simple i2c probe
i2c: mux: pca9541: switch to using .probe_new
i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
i2c: qcom-geni: add support for I2C Master Hub variant
i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant
soc: qcom: geni-se: add support for I2C Master Hub wrapper variant
soc: qcom: geni-se: add desc struct to specify clocks from device match data
dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine
dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant
dt-bindings: i2c: renesas,riic: Document RZ/Five SoC
i2c: tegra: Set ACPI node as primary fwnode
i2c: smbus: add DDR support for SPD
i2c: /pasemi: PASemi I2C controller IRQ enablement
...
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Minghao Chi <[email protected]>
Signed-off-by: ye xingchen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The call to clk_disable_unprepare() is left out in the error handling of
devm_rtc_allocate_device. Add it back.
Fixes: 5490a1e018a4 ("rtc: mxc_v2: fix possible race condition")
Signed-off-by: GUO Zihua <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Change 'modifed' to 'modified'.
Change 'Updata' to 'Update'.
Change 'Initiatlize' to 'Initialize'.
Signed-off-by: Zhang Jiaming <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Delete the redundant word 'is'.
Signed-off-by: Xiang wangx <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Signed-off-by: shaomin Deng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Make the interrupt pin of the RV3028 usable with GPIO controllers
without level type IRQs support, such as the TI Davinci GPIO controller.
Therefore, allow the IRQ type to be passed from the device tree if
available.
Based on commit d4785b46345c ("rtc: pcf2127: use IRQ flags obtained from device tree if available")
Signed-off-by: Wadim Egorov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
Signed-off-by: Jean Delvare <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The default setting of end_time minus start_time is whole 1 second.
Thus, if it's not being configured in any GCL entry then it will be
staying at original 1 second.
This patch is changing the start_time and end_time to be end_time as
if setting zero will be having weird HW behavior where the gate will
not be fully closed.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading")
Signed-off-by: Tan Tee Min <[email protected]>
Signed-off-by: Muhammad Husaini Zulkifli <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Qbv users can specify a cycle time that is not equal to the total GCL
intervals. Hence, recalculation is necessary here to exclude the time
interval that exceeds the cycle time. As those GCL which exceeds the
cycle time will be truncated.
According to IEEE Std. 802.1Q-2018 section 8.6.9.2, once the end of
the list is reached, it will switch to the END_OF_CYCLE state and
leave the gates in the same state until the next cycle is started.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading")
Signed-off-by: Tan Tee Min <[email protected]>
Signed-off-by: Muhammad Husaini Zulkifli <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Introduce qbv_enable flag in igc_adapter struct to store the Qbv on/off.
So this allow the BaseTime to enroll with zero value.
Fixes: 61572d5f8f91 ("igc: Simplify TSN flags handling")
Signed-off-by: Muhammad Husaini Zulkifli <[email protected]>
Signed-off-by: Tan Tee Min <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Using the tc qdisc command, the user can set basetime to any value.
Checking should be done on the driver's side to prevent registering
basetime values that are less than zero.
Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading")
Signed-off-by: Muhammad Husaini Zulkifli <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Configuring strict cycle mode in the controller forces more well
behaved transmissions when taprio is offloaded.
When set this strict_cycle and strict_end, transmission is not
enabled if the whole packet cannot be completed before end of
the Qbv cycle.
Fixes: 82faa9b79950 ("igc: Add support for ETF offloading")
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: Aravindhan Gunasekaran <[email protected]>
Signed-off-by: Muhammad Husaini Zulkifli <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The I225 hardware has a limitation that packets can only be scheduled
in the [0, cycle-time] interval. So, scheduling a packet to the start
of the next cycle doesn't usually work.
To overcome this, we use the Transmit Descriptor first flag to indicates
that a packet should be the first packet (from a queue) in a cycle
according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle
in Intel Discrete I225/6 User Manual.
But this only works if there was any packet from that queue during the
current cycle, to avoid this issue, we issue an empty packet if that's
not the case. Also require one more descriptor to be available, to take
into account the empty packet that might be issued.
Test Setup:
Talker: Use l2_tai to generate the launchtime into packet load.
Listener: Use timedump.c to compute the delta between packet arrival
and LaunchTime packet payload.
Test Result:
Before:
1666000610127300000,1666000610127300096,96,621273
1666000610127400000,1666000610127400192,192,621274
1666000610127500000,1666000610127500032,32,621275
1666000610127600000,1666000610127600128,128,621276
1666000610127700000,1666000610127700224,224,621277
1666000610127800000,1666000610127800064,64,621278
1666000610127900000,1666000610127900160,160,621279
1666000610128000000,1666000610128000000,0,621280
1666000610128100000,1666000610128100096,96,621281
1666000610128200000,1666000610128200192,192,621282
1666000610128300000,1666000610128300032,32,621283
1666000610128400000,1666000610128301056,-98944,621284
1666000610128500000,1666000610128302080,-197920,621285
1666000610128600000,1666000610128302848,-297152,621286
1666000610128700000,1666000610128303872,-396128,621287
1666000610128800000,1666000610128304896,-495104,621288
1666000610128900000,1666000610128305664,-594336,621289
1666000610129000000,1666000610128306688,-693312,621290
1666000610129100000,1666000610128307712,-792288,621291
1666000610129200000,1666000610128308480,-891520,621292
1666000610129300000,1666000610128309504,-990496,621293
1666000610129400000,1666000610128310528,-1089472,621294
1666000610129500000,1666000610128311296,-1188704,621295
1666000610129600000,1666000610128312320,-1287680,621296
1666000610129700000,1666000610128313344,-1386656,621297
1666000610129800000,1666000610128314112,-1485888,621298
1666000610129900000,1666000610128315136,-1584864,621299
1666000610130000000,1666000610128316160,-1683840,621300
1666000610130100000,1666000610128316928,-1783072,621301
1666000610130200000,1666000610128317952,-1882048,621302
1666000610130300000,1666000610128318976,-1981024,621303
1666000610130400000,1666000610128319744,-2080256,621304
1666000610130500000,1666000610128320768,-2179232,621305
1666000610130600000,1666000610128321792,-2278208,621306
1666000610130700000,1666000610128322816,-2377184,621307
1666000610130800000,1666000610128323584,-2476416,621308
1666000610130900000,1666000610128324608,-2575392,621309
1666000610131000000,1666000610128325632,-2674368,621310
1666000610131100000,1666000610128326400,-2773600,621311
1666000610131200000,1666000610128327424,-2872576,621312
1666000610131300000,1666000610128328448,-2971552,621313
1666000610131400000,1666000610128329216,-3070784,621314
1666000610131500000,1666000610131500032,32,621315
1666000610131600000,1666000610131600128,128,621316
1666000610131700000,1666000610131700224,224,621317
After:
1666073510646200000,1666073510646200064,64,2676462
1666073510646300000,1666073510646300160,160,2676463
1666073510646400000,1666073510646400256,256,2676464
1666073510646500000,1666073510646500096,96,2676465
1666073510646600000,1666073510646600192,192,2676466
1666073510646700000,1666073510646700032,32,2676467
1666073510646800000,1666073510646800128,128,2676468
1666073510646900000,1666073510646900224,224,2676469
1666073510647000000,1666073510647000064,64,2676470
1666073510647100000,1666073510647100160,160,2676471
1666073510647200000,1666073510647200256,256,2676472
1666073510647300000,1666073510647300096,96,2676473
1666073510647400000,1666073510647400192,192,2676474
1666073510647500000,1666073510647500032,32,2676475
1666073510647600000,1666073510647600128,128,2676476
1666073510647700000,1666073510647700224,224,2676477
1666073510647800000,1666073510647800064,64,2676478
1666073510647900000,1666073510647900160,160,2676479
1666073510648000000,1666073510648000000,0,2676480
1666073510648100000,1666073510648100096,96,2676481
1666073510648200000,1666073510648200192,192,2676482
1666073510648300000,1666073510648300032,32,2676483
1666073510648400000,1666073510648400128,128,2676484
1666073510648500000,1666073510648500224,224,2676485
1666073510648600000,1666073510648600064,64,2676486
1666073510648700000,1666073510648700160,160,2676487
1666073510648800000,1666073510648800000,0,2676488
1666073510648900000,1666073510648900096,96,2676489
1666073510649000000,1666073510649000192,192,2676490
1666073510649100000,1666073510649100032,32,2676491
1666073510649200000,1666073510649200128,128,2676492
1666073510649300000,1666073510649300224,224,2676493
1666073510649400000,1666073510649400064,64,2676494
1666073510649500000,1666073510649500160,160,2676495
1666073510649600000,1666073510649600000,0,2676496
1666073510649700000,1666073510649700096,96,2676497
1666073510649800000,1666073510649800192,192,2676498
1666073510649900000,1666073510649900032,32,2676499
1666073510650000000,1666073510650000128,128,2676500
Fixes: 82faa9b79950 ("igc: Add support for ETF offloading")
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Co-developed-by: Aravindhan Gunasekaran <[email protected]>
Signed-off-by: Aravindhan Gunasekaran <[email protected]>
Co-developed-by: Muhammad Husaini Zulkifli <[email protected]>
Signed-off-by: Muhammad Husaini Zulkifli <[email protected]>
Signed-off-by: Malli C <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Pull VFIO updates from Alex Williamson:
- Replace deprecated git://github.com link in MAINTAINERS (Palmer
Dabbelt)
- Simplify vfio/mlx5 with module_pci_driver() helper (Shang XiaoJing)
- Drop unnecessary buffer from ACPI call (Rafael Mendonca)
- Correct latent missing include issue in iova-bitmap and fix support
for unaligned bitmaps. Follow-up with better fix through refactor
(Joao Martins)
- Rework ccw mdev driver to split private data from parent structure,
better aligning with the mdev lifecycle and allowing us to remove a
temporary workaround (Eric Farman)
- Add an interface to get an estimated migration data size for a
device, allowing userspace to make informed decisions, ex. more
accurately predicting VM downtime (Yishai Hadas)
- Fix minor typo in vfio/mlx5 array declaration (Yishai Hadas)
- Simplify module and Kconfig through consolidating SPAPR/EEH code and
config options and folding virqfd module into main vfio module (Jason
Gunthorpe)
- Fix error path from device_register() across all vfio mdev and sample
drivers (Alex Williamson)
- Define migration pre-copy interface and implement for vfio/mlx5
devices, allowing portions of the device state to be saved while the
device continues operation, towards reducing the stop-copy state size
(Jason Gunthorpe, Yishai Hadas, Shay Drory)
- Implement pre-copy for hisi_acc devices (Shameer Kolothum)
- Fixes to mdpy mdev driver remove path and error path on probe (Shang
XiaoJing)
- vfio/mlx5 fixes for incorrect return after copy_to_user() fault and
incorrect buffer freeing (Dan Carpenter)
* tag 'vfio-v6.2-rc1' of https://github.com/awilliam/linux-vfio: (42 commits)
vfio/mlx5: error pointer dereference in error handling
vfio/mlx5: fix error code in mlx5vf_precopy_ioctl()
samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()
hisi_acc_vfio_pci: Enable PRE_COPY flag
hisi_acc_vfio_pci: Move the dev compatibility tests for early check
hisi_acc_vfio_pci: Introduce support for PRE_COPY state transitions
hisi_acc_vfio_pci: Add support for precopy IOCTL
vfio/mlx5: Enable MIGRATION_PRE_COPY flag
vfio/mlx5: Fallback to STOP_COPY upon specific PRE_COPY error
vfio/mlx5: Introduce multiple loads
vfio/mlx5: Consider temporary end of stream as part of PRE_COPY
vfio/mlx5: Introduce vfio precopy ioctl implementation
vfio/mlx5: Introduce SW headers for migration states
vfio/mlx5: Introduce device transitions of PRE_COPY
vfio/mlx5: Refactor to use queue based data chunks
vfio/mlx5: Refactor migration file state
vfio/mlx5: Refactor MKEY usage
vfio/mlx5: Refactor PD usage
vfio/mlx5: Enforce a single SAVE command at a time
vfio: Extend the device migration protocol with PRE_COPY
...
|
|
Pull kvm updates from Paolo Bonzini:
"ARM64:
- Enable the per-vcpu dirty-ring tracking mechanism, together with an
option to keep the good old dirty log around for pages that are
dirtied by something other than a vcpu.
- Switch to the relaxed parallel fault handling, using RCU to delay
page table reclaim and giving better performance under load.
- Relax the MTE ABI, allowing a VMM to use the MAP_SHARED mapping
option, which multi-process VMMs such as crosvm rely on (see merge
commit 382b5b87a97d: "Fix a number of issues with MTE, such as
races on the tags being initialised vs the PG_mte_tagged flag as
well as the lack of support for VM_SHARED when KVM is involved.
Patches from Catalin Marinas and Peter Collingbourne").
- Merge the pKVM shadow vcpu state tracking that allows the
hypervisor to have its own view of a vcpu, keeping that state
private.
- Add support for the PMUv3p5 architecture revision, bringing support
for 64bit counters on systems that support it, and fix the
no-quite-compliant CHAIN-ed counter support for the machines that
actually exist out there.
- Fix a handful of minor issues around 52bit VA/PA support (64kB
pages only) as a prefix of the oncoming support for 4kB and 16kB
pages.
- Pick a small set of documentation and spelling fixes, because no
good merge window would be complete without those.
s390:
- Second batch of the lazy destroy patches
- First batch of KVM changes for kernel virtual != physical address
support
- Removal of a unused function
x86:
- Allow compiling out SMM support
- Cleanup and documentation of SMM state save area format
- Preserve interrupt shadow in SMM state save area
- Respond to generic signals during slow page faults
- Fixes and optimizations for the non-executable huge page errata
fix.
- Reprogram all performance counters on PMU filter change
- Cleanups to Hyper-V emulation and tests
- Process Hyper-V TLB flushes from a nested guest (i.e. from a L2
guest running on top of a L1 Hyper-V hypervisor)
- Advertise several new Intel features
- x86 Xen-for-KVM:
- Allow the Xen runstate information to cross a page boundary
- Allow XEN_RUNSTATE_UPDATE flag behaviour to be configured
- Add support for 32-bit guests in SCHEDOP_poll
- Notable x86 fixes and cleanups:
- One-off fixes for various emulation flows (SGX, VMXON, NRIPS=0).
- Reinstate IBPB on emulated VM-Exit that was incorrectly dropped
a few years back when eliminating unnecessary barriers when
switching between vmcs01 and vmcs02.
- Clean up vmread_error_trampoline() to make it more obvious that
params must be passed on the stack, even for x86-64.
- Let userspace set all supported bits in MSR_IA32_FEAT_CTL
irrespective of the current guest CPUID.
- Fudge around a race with TSC refinement that results in KVM
incorrectly thinking a guest needs TSC scaling when running on a
CPU with a constant TSC, but no hardware-enumerated TSC
frequency.
- Advertise (on AMD) that the SMM_CTL MSR is not supported
- Remove unnecessary exports
Generic:
- Support for responding to signals during page faults; introduces
new FOLL_INTERRUPTIBLE flag that was reviewed by mm folks
Selftests:
- Fix an inverted check in the access tracking perf test, and restore
support for asserting that there aren't too many idle pages when
running on bare metal.
- Fix build errors that occur in certain setups (unsure exactly what
is unique about the problematic setup) due to glibc overriding
static_assert() to a variant that requires a custom message.
- Introduce actual atomics for clear/set_bit() in selftests
- Add support for pinning vCPUs in dirty_log_perf_test.
- Rename the so called "perf_util" framework to "memstress".
- Add a lightweight psuedo RNG for guest use, and use it to randomize
the access pattern and write vs. read percentage in the memstress
tests.
- Add a common ucall implementation; code dedup and pre-work for
running SEV (and beyond) guests in selftests.
- Provide a common constructor and arch hook, which will eventually
be used by x86 to automatically select the right hypercall (AMD vs.
Intel).
- A bunch of added/enabled/fixed selftests for ARM64, covering
memslots, breakpoints, stage-2 faults and access tracking.
- x86-specific selftest changes:
- Clean up x86's page table management.
- Clean up and enhance the "smaller maxphyaddr" test, and add a
related test to cover generic emulation failure.
- Clean up the nEPT support checks.
- Add X86_PROPERTY_* framework to retrieve multi-bit CPUID values.
- Fix an ordering issue in the AMX test introduced by recent
conversions to use kvm_cpu_has(), and harden the code to guard
against similar bugs in the future. Anything that tiggers
caching of KVM's supported CPUID, kvm_cpu_has() in this case,
effectively hides opt-in XSAVE features if the caching occurs
before the test opts in via prctl().
Documentation:
- Remove deleted ioctls from documentation
- Clean up the docs for the x86 MSR filter.
- Various fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (361 commits)
KVM: x86: Add proper ReST tables for userspace MSR exits/flags
KVM: selftests: Allocate ucall pool from MEM_REGION_DATA
KVM: arm64: selftests: Align VA space allocator with TTBR0
KVM: arm64: Fix benign bug with incorrect use of VA_BITS
KVM: arm64: PMU: Fix period computation for 64bit counters with 32bit overflow
KVM: x86: Advertise that the SMM_CTL MSR is not supported
KVM: x86: remove unnecessary exports
KVM: selftests: Fix spelling mistake "probabalistic" -> "probabilistic"
tools: KVM: selftests: Convert clear/set_bit() to actual atomics
tools: Drop "atomic_" prefix from atomic test_and_set_bit()
tools: Drop conflicting non-atomic test_and_{clear,set}_bit() helpers
KVM: selftests: Use non-atomic clear/set bit helpers in KVM tests
perf tools: Use dedicated non-atomic clear/set bit helpers
tools: Take @bit as an "unsigned long" in {clear,set}_bit() helpers
KVM: arm64: selftests: Enable single-step without a "full" ucall()
KVM: x86: fix APICv/x2AVIC disabled when vm reboot by itself
KVM: Remove stale comment about KVM_REQ_UNHALT
KVM: Add missing arch for KVM_CREATE_DEVICE and KVM_{SET,GET}_DEVICE_ATTR
KVM: Reference to kvm_userspace_memory_region in doc and comments
KVM: Delete all references to removed KVM_SET_MEMORY_ALIAS ioctl
...
|
|
The use of set_64bit() in X86_64 only code is pretty pointless, seeing
how it's a direct assignment. Remove all this nonsense.
[nathanchance: unbreak irte]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/20221022114425.168036718%40infradead.org
|
|
Because endlessly repeating:
set_memory_ro()
set_memory_x()
is getting tedious.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These fix an AML byte code execution issue in ACPICA and two issues in
the ACPI EC driver which requires rearranging ACPICA code.
Specifics:
- Avoid trying to resolve operands in AML when there are none
(Amadeusz Sławiński)
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede)
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space
(Hans de Goede)
- Defer the evaluation of _REG for ECDT described ECs till the
matching EC device in the DSDT gets parsed and acpi_ec_add() gets
called for it (Hans de Goede)
- Fix EC address space handler unregistration (Hans de Goede)"
* tag 'acpi-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These are updates of assorted thermal drivers, mostly for ARM
platforms, generally isolated and fairly straightforward, and the
recent Intel HFI driver fix for systems without HFI support.
Specifics:
- Avoid clearing the HFI status bit on systems without HFI support
which triggers unchecked MSR access errors (Srinivas Pandruvada)
- Add sm8450 and sm8550 QCom compatible string to DT bindings (Luca
Weiss, Neil Armstrong)
- Use devm_platform_get_and_ioremap_resource on the ST platform to
group two calls into a single one (Minghao Chi)
- Use GENMASK instead of bitmaps and validate the temperature after
reading it in the imx8mm_thermal driver (Marcus Folkesson)
- Convert generic-adc-thermal to DT schema (Rob Herring)
- Fix debug print message with inverted logic in the k3_j72xx_bandgap
driver (Keerthy)
- Fix memory leak on thermal_of_zone_register() failure (Ido
Schimmel)
- Add support for IPQ8074 in the tsens thermal driver along with the
DT bindings (Robert Marko)
- Fix and rework the debugfs code in the tsens driver (Christian
Marangi)
- Add calibration and DT documentation for the imx8mm driver (Marek
Vasut)
- Add DT bindings and compatible for the Mediatek SoCs mt7981 and
mt7983 (Daniel Golle)
- Don't show an error message if it happens at probe time while it
will be deferred on the QCom SPMI ADC driver (Johan Hovold)
- Add HWMon support for the imx8mm board (Alexander Stein)
- Remove pointless include from the power allocator governor
(Christophe JAILLET)
- Add interrupt DT bindings for QCom SoCs SC8280XP, SM6350 and SM8450
(Krzysztof Kozlowski)
- Fix inaccurate warning message for the QCom tsens gen2 (Luca Weiss)
- Demote error log of thermal zone register to debug in the tsens
QCom driver (Manivannan Sadhasivam)
- Consolidate the the efuse values and the errata handling in the TI
Bandgap driver (Bryan Brattlof)
- Document Renesas RZ/Five as compatible with RZ/G2UL in the DT
bindings (Lad Prabhakar)
- Fix the irq handler return value in the LMh driver (Bjorn
Andersson)
- Delete empty platform remove callback from imx_sc_thermal (Uwe
Kleine-König)"
* tag 'thermal-6.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
thermal/drivers/imx_sc_thermal: Drop empty platform remove function
thermal/drivers/qcom/lmh: Fix irq handler return value
dt-bindings: thermal: qcom-tsens: Add compatible for sm8550
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
dt-bindings: thermal: rzg2l-thermal: Document RZ/Five SoC
dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range
dt-bindings: thermal: k3-j72xx: elaborate on binding description
thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum workaround
thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure
thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag
thermal/drivers/k3_j72xx_bandgap: Simplify k3_thermal_get_temp() function
thermal/drivers/qcom: Demote error log of thermal zone register to debug
thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
dt-bindings: thermal: qcom-tsens: narrow interrupts for SC8280XP, SM6350 and SM8450
thermal/core/power allocator: Remove a useless include
thermal/drivers/imx8mm: Add hwmon support
thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message
dt-bindings: thermal: mediatek: add compatible string for MT7986 and MT7981 SoC
thermal: ti-soc-thermal: Drop comma after SoC match table sentinel
thermal/drivers/imx: Add support for loading calibration data from OCOTP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a new GPIO multiplexer driver, bunch of driver updates and
refactoring in the core GPIO library.
GPIO core:
- teach gpiolib to work with software nodes for HW description
- remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
the number of GPIOS since the allocation became entirely dynamic
- add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
controller, Freescale PCIe and Ethernet controller, Himax LCDs and
Mediatek mt2701
- refactor OF quirk code
- some general refactoring of the OF and ACPI code, adding new
helpers, minor tweaks and fixes, making fwnode usage consistent
etc.
GPIO uAPI:
- fix an issue where the user-space can trigger a NULL-pointer
dereference in the kernel by opening a device file, forcing a
driver unbind and then calling one of the syscalls on the
associated file descriptor
New drivers:
- add gpio-latch: a new GPIO multiplexer based on latches connected
to other GPIOs
Driver updates:
- convert i2c GPIO expanders to using .probe_new()
- drop the gpio-sta2x11 driver
- factor out common code for the ACCES IDIO-16 family of controllers
and use this new library wherever applicable in drivers
- add DT support to gpio-hisi
- allow building gpio-davinci as a module and increase its maxItems
property
- add support for a new model to gpio-pca9570
- other minor changes to various drivers"
* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
gpio: sim: set a limit on the number of GPIOs
gpiolib: protect the GPIO device against being dropped while in use by user-space
gpiolib: cdev: fix NULL-pointer dereferences
gpiolib: Provide to_gpio_device() helper
gpiolib: Unify access to the device properties
gpio: Do not include <linux/kernel.h> when not really needed.
gpio: pcf857x: Convert to i2c's .probe_new()
gpio: pca953x: Convert to i2c's .probe_new()
gpio: max732x: Convert to i2c's .probe_new()
dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
gpiolib: ensure that fwnode is properly set
gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
gpiolib: of: Use correct fwnode for DT-probed chips
gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
gpiolib: add support for software nodes
gpiolib: consolidate GPIO lookups
gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
gpiolib: acpi: change acpi_find_gpio() to accept firmware node
...
|
|
Merge additional ACPI EC driver fixes for 6.2-rc1:
- Fix EC address space handler unregistration (Hans de Goede).
- Defer the evaluation of _REG for ECDT described ECs till the matching
EC device in the DSDT gets parsed and acpi_ec_add() gets called for
it (Hans de Goede).
* acpi-ec:
ACPI: EC: Fix ECDT probe ordering issues
ACPI: EC: Fix EC address space handler unregistration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"The most relevant change are the patches from Dmitry Torokhov to
switch omapfb to the gpiod API.
The other patches are small and fix e.g. UML build issues, improve the
error paths and cleanup code"
* tag 'fbdev-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (32 commits)
fbdev: fbcon: release buffer when fbcon_do_set_font() failed
fbdev: sh_mobile_lcdcfb: use sysfs_emit() to instead of scnprintf()
fbdev: uvesafb: use sysfs_emit() to instead of scnprintf()
fbdev: uvesafb: Simplify uvesafb_remove()
fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()
fbdev: uvesafb: don't build on UML
fbdev: geode: don't build on UML
fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()
fbdev: matroxfb: Convert to i2c's .probe_new()
fbdev: da8xx-fb: add missing regulator_disable() in fb_probe
fbdev: controlfb: fix spelling mistake "paramaters"->"parameters"
fbdev: vermilion: decrease reference count in error path
fbdev: smscufx: fix error handling code in ufx_usb_probe
fbdev: via: Fix error in via_core_init()
fbdev: pm2fb: fix missing pci_disable_device()
fbdev: pxafb: Remove unnecessary print function dev_err()
fbdev: omapfb: panel-sharp-ls037v7dw01: fix included headers
fbdev: omapfb: panel-tpo-td028ttec1: stop including gpio.h
fbdev: omapfb: panel-lgphilips-lb035q02: remove backlight GPIO handling
fbdev: omapfb: encoder-opa362: fix included headers
...
|
|
Merge additional ACPICA changes for 6.2-rc1:
- Avoid trying to resolve operands in AML when there are none (Amadeusz
Sławiński).
- Fix indentation in include/acpi/acpixf.h to help applying patches
from the upstream ACPICA git (Hans de Goede).
- Make it possible to install an address space handler without
evaluating _REG for Operation Regions in the given address space (Hans
de Goede).
* acpica:
ACPICA: Allow address_space_handler Install and _REG execution as 2 separate steps
ACPICA: include/acpi/acpixf.h: Fix indentation
ACPICA: Fix operand resolution
|
|
Update the reported maximum shader clock to the value which can
be guarded to be achieved on all cards. This is to align with
Window setting.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.0.x
|
|
Correct the pstate standard/peak profiling mode clock settings
for SMU13.0.0.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.0.x
|