aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-08-11crypto: hisilicon/sec - Do not check for 0 return after calling ↵Ruan Jinjie1-2/+2
platform_get_irq() Since commit ce753ad1549c ("platform: finally disallow IRQ0 in platform_get_irq() and its ilk"), there is no possible for platform_get_irq() to return 0. Use the return value from platform_get_irq(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11crypto: qat - use kfree_sensitive instead of memset/kfree()Yang Yingliang1-2/+1
Use kfree_sensitive() instead of memset() and kfree(). Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11crypto: stm32 - Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11crypto: stm32 - Drop if block with always false conditionUwe Kleine-König1-5/+1
stm32_hash_remove() is only called after stm32_hash_probe() succeeded. In this case platform_set_drvdata() was called with a non-NULL data patameter. The check for hdev being non-NULL can be dropped because hdev is never NULL (or something bad like memory corruption happened and then the check doesn't help any more either). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11crypto: stm32 - Properly handle pm_runtime_get failingUwe Kleine-König1-4/+3
If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this means the clk wasn't prepared and enabled. Returning early in this case however is wrong as then the following resource frees are skipped and this is never catched up. So do all the cleanups but clk_disable_unprepare(). Also don't emit a warning, as stm32_hash_runtime_resume() already emitted one. Note that the return value of stm32_hash_remove() is mostly ignored by the device core. The only effect of returning zero instead of an error value is to suppress another warning in platform_remove(). So return 0 even if pm_runtime_resume_and_get() failed. Fixes: 8b4d566de6a5 ("crypto: stm32/hash - Add power management support") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-11crypto: starfive - fix return value check in starfive_aes_prepare_req()Yang Yingliang1-2/+2
kzalloc() returns NULL pointer not PTR_ERR() when it fails, so replace the IS_ERR() check with NULL pointer check. Fixes: e22471c2331c ("crypto: starfive - Add AES skcipher and aead support") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-05hwrng: xgene: Add explicit io.h includeRob Herring1-0/+1
Commit 0788257aeebe ("hwrng: Explicitly include correct DT includes") removed an implicit include of io.h. On most architectures, there's still an implicit include of it, but not on s390. Enabling COMPILE_TEST in commit 1ce1cd8208ad ("hwrng: Enable COMPILE_TEST for more drivers") exposed this. Fixes: 0788257aeebe ("hwrng: Explicitly include correct DT includes") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202308042049.8R2tNRoo-lkp@intel.com/ Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-04hwrng: Enable COMPILE_TEST for more driversRob Herring3-16/+19
There's quite a few hwrng drivers which are easily enabled for COMPILE_TEST, so let's enable them. The dependency on HW_RANDOM is redundant, so drop that while we're here. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-04hwrng: Explicitly include correct DT includesRob Herring12-21/+12
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-04crypto: atmel - Use dev_err_probe instead of dev_errWang Ming1-2/+2
It is possible that dma_request_chan will return EPROBE_DEFER, which means that dd->dev is not ready yet. In this case, dev_err(dd->dev), there will be no output. This patch fixes the bug. Signed-off-by: Wang Ming <machel@vivo.com> Reviewed-by: Ryan Wanner <Ryan.Wanner@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-04crypto: caam - add power management supportHoria Geanta4-21/+306
Add support for suspend and resume operation for PM in CAAM driver. When the CAAM goes in suspend, the hardware is considered to do nothing. On some platforms, the power of the CAAM is not turned off so it keeps its configuration. On other platforms, it doesn't so it is necessary to save the state of the CAAM: - JRs MID - Address of input and output rings Signed-off-by: Horia Geanta <horia.geanta@nxp.com> Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com> Signed-off-by: Dan Douglass <dan.douglass@nxp.com> Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com> Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-08-04crypto: caam - Change structure type representing DECO MIDFranck LENORMAND1-7/+1
The structure partid is not suitable to represent the DECO MID register. This patch replace partid by masterid which is more appropriate. Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28crypto: caam - Remove messages related to memory allocation failureChristophe JAILLET1-11/+3
On memory allocation failure, the function calling stack is already logged. So there is no need to explicitly log an extra message. Remove them, ans simplify some code accordingly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28crypto: caam - Use struct_size()Christophe JAILLET1-2/+1
Use struct_size() instead of hand-writing it, when allocating a structure with a flex array. This is less verbose, more robust and more informative. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28hwrng: cn10k - use dev_err_probeMartin Kaiser1-8/+4
Use dev_err_probe in error paths of the probe function, making the code a tiny bit simpler. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28hwrng: cn10k - delete empty remove functionMartin Kaiser1-6/+0
The remove function is empty, we can delete it. It's ok for a PCI driver to have no remove function. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28hwrng: cctrng - use dev_err_probe in error pathsMartin Kaiser1-20/+10
Use dev_err_probe in error paths to make the code a bit shorter. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28hwrng: cctrng - merge cc_trng_clk_init into its only callerMartin Kaiser1-20/+4
cc_trng_clk_init is called only from the probe function. Merge the two functions, this saves some lines of code. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28hwrng: cctrng - let devres enable the clockMartin Kaiser1-24/+5
Call devm_clk_get_optional_enabled in the cctrng driver. We don't have to disable and unprepare the clock any more in error paths or in the remove function. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28hwrng: cctrng - don't open code init and exit functionsMartin Kaiser1-15/+5
Do not open code the init and exit functions of the cctrng driver. If we move the BUILD_BUG_ON checks into the probe function, we can use module_platform_driver and make the code shorter. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-28crypto: starfive - Add AES skcipher and aead supportJia Jie Ho5-7/+1132
Adding AES skcipher and aead support to Starfive crypto module. Skcipher modes of operation include ecb, cbc, ctr, ofb, cfb. Aead modes include ccm and gcm. v1->v2: - Add include interrupt.h to fix compile error. (Herbert) Co-developed-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Huan Feng <huan.feng@starfivetech.com> Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: arm-smccc-trng - don't set drvdataMartin Kaiser1-2/+0
Don't set drvdata, there's nobody who reads it. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: hisilicon/hpre - enable sva error interrupt eventWeili Qian1-1/+4
Enable sva error interrupt event. When an error occurs on the sva module, the device reports an abnormal interrupt to the driver. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: hisilicon/qm - increase device doorbell timeoutWeili Qian1-0/+6
When both the accelerator device and SMMU are busy, the processing time of the doorbell may be prolonged. As a result, the doorbell may timeout, especially in the sva scenario. Therefore, the doorbell timeout is increased. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: hisilicon/qm - stop function and write data to memoryWeili Qian1-6/+8
When the system is shut down, the process is killed, but the accelerator device does not stop executing the tasks. If the accelerator device still accesses the memory and writes back data to the memory after the memory is reclaimed by the system, an NFE error may occur. Therefore, before the system is shut down, the driver needs to stop the device and write data back to the memory. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: hisilicon/qm - flush all work before driver removedWeili Qian1-0/+8
Before removing the driver, flush inter-function communication work, and subsequent communication work is not processed. This prevents communication threads from accessing released memory. Fixes: ("crypto: hisilicon/qm - enable PF and VFs communication") Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: stm32 - remove flag HASH_FLAGS_DMA_READYThomas Bourgoin1-13/+8
Remove flag HASH_FLAGS_DMA_READY as it can put the driver in a deadlock state. If the DMA automatically set the DCAL bit, the interrupt indicating the end of a computation can be raised before the DMA complete sequence. Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: stm32 - fix MDMAT conditionThomas Bourgoin1-1/+1
If IP has MDMAT support, set or reset the bit MDMAT in Control Register. Fixes: b56403a25af7 ("crypto: stm32/hash - Support Ux500 hash") Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: stm32 - check request size and scatterlist size when using DMA.Thomas Bourgoin1-5/+10
When we are sending the data to HASH with the DMA, we send all the data provided in the scatterlists of the request. But in some cases (ex : tcrypt performances tests), we should only send req->nbytes When iterating through the scatterlist we verify if it is the last scatterlist or if the number of bytes sent plus the data of the current scatterlist is superior of the total number of bytes to hash. Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: stm32 - fix loop iterating through scatterlist for DMAThomas Bourgoin1-1/+1
We were reading the length of the scatterlist sg after copying value of tsg inside. So we are using the size of the previous scatterlist and for the first one we are using an unitialised value. Fix this by copying tsg in sg[0] before reading the size. Fixes : 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module") Cc: stable@vger.kernel.org Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: stm32 - remove bufcnt in stm32_hash_write_ctrl.Thomas Bourgoin1-3/+3
Commit "crypto: stm32 - Fix empty message processing" remove the use of the argument bufcnt in stm32_hash_write_ctrl. Hence, we can remove it from the function prototype and simplify the function declaration. Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22crypto: stm32 - add new algorithms supportThomas Bourgoin2-125/+543
Add the all SHA-2 (up to 512) and SHA-3 algorithm support. Update compatible table to add stm32mp13. Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ba431 - use dev_err_probe after failed registrationMartin Kaiser1-4/+2
Use dev_err_probe to print the error message after a failed hwrng registration. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ba431 - don't init of_device_id's dataMartin Kaiser1-1/+1
We have no device-specific data for silex-insight,ba431-rng. There's no need to set .data = NULL, this is the default. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ba431 - do not set drvdataMartin Kaiser1-2/+0
Do not set drvdata in the ba431 driver. Nobody is using it. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ingenic - switch to device managed registrationMartin Kaiser1-11/+1
Call devm_hwrng_register for device managed registration of the ingenic-trng driver. ingenic_trng_remove can then be deleted. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ingenic - don't disable the rng in ingenic_trng_removeMartin Kaiser1-5/+0
There's no need to disable the rng in ingenic_trng_remove. The driver's init function sets the CFG_GEN_EN bit to enable the rng. The cleanup function clears CFG_GEN_EN to revert this. The remove function calls hwrng_unregister. If the ingenic-trng is not the current rng at this point, CFG_GEN_EN has already been cleared. If the ingenic-trng is the current rng, drop_current_rng will call the cleanup function. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ingenic - use dev_err_probe in error pathsMartin Kaiser1-12/+8
Use dev_err_probe in error paths to make the code a bit shorter. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ingenic - use devm_clk_get_enabledMartin Kaiser1-18/+6
Use devm_clk_get_enabled in the ingenic-trng driver. We don't have to disable and unprepare the clock any more in error paths or in the remove function. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ingenic - remove dead assignmentsMartin Kaiser1-2/+0
Don't assign a value to ret if we're about to return from the probe function and ret's value is not used. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ingenic - remove two unused definesMartin Kaiser1-2/+0
Remove two defines which are not used in the ingenic-trng driver's code. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-22hwrng: ingenic - enable compile testingMartin Kaiser1-2/+1
Enable compile testing for the ingenic-trng driver. Remove the dependency on HW_RANDOM. The ingenic-trng config section is under "if HW_RANDOM". Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20crypto: hisilicon/hpre - ensure private key less than nWeili Qian1-2/+8
The private key of the curve key size generated by stdrng, which maybe not less than n. Therefore, the private key with the curve key size minus 1 is generated to ensure that the private key is less than n. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20crypto: starfive - Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20hwrng: timeriomem - Use devm_platform_get_and_ioremap_resource()Yangtao Li1-15/+10
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20crypto: atmel-tdes - Use devm_platform_get_and_ioremap_resource()Yangtao Li1-11/+3
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20crypto: atmel-sha - Use devm_platform_get_and_ioremap_resource()Yangtao Li1-12/+3
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20crypto: atmel-aes - Use devm_platform_get_and_ioremap_resource()Yangtao Li1-12/+3
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20crypto: keembay - Convert to devm_platform_ioremap_resource()Yangtao Li1-9/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2023-07-20crypto: omap-des - Use devm_platform_get_and_ioremap_resource()Yangtao Li1-7/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Powered by cgit, Gruvboxed by Blaster4385.