| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Dynamically allocate the sensors array based on the amount
of platform sensors in preparation for rk3588 support, which
needs 7 sensors.
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Replace the channel ID lookup table by a simple offset, since
the channel IDs are consecutive.
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Use dev_err_probe to simplify error printing in the driver's probe
routine.
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
By using devm_clk_get_enabled() the clock acquisition and
enabling can be done in one step with automatic error
handling.
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
It's possible to directly get the match data in a generic
way nowadays.
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control material for 6.4-rc1 from Daniel Lezcano:
"- Add more thermal zone device encapsulation: prevent setting
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram
Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)"
* tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/ti: Use fixed update interval
thermal/drivers/stm: Don't set no_hwmon to false
thermal/drivers/db8500: Use driver dev instead of tz->device
thermal/core: Relocate the traces definition in thermal directory
thermal/drivers/hisi: Use devm_platform_ioremap_resource()
thermal/drivers/imx: Use the thermal framework for the trip point
thermal/drivers/imx: Remove get_trip_temp ops
thermal/drivers/rcar_gen3_thermal: Remove R-Car H3 ES1.* handling
thermal/drivers/mediatek: Add delay after thermal banks initialization
thermal/drivers/mediatek: Add support for MT8365 SoC
thermal/drivers/mediatek: Control buffer enablement tweaks
dt-bindings: thermal: mediatek: Add binding documentation for MT8365 SoC
|
|
Once thermal_list_lock has been acquired in
__thermal_cooling_device_register(), it is not necessary to drop it
and take it again until all of the thermal zones have been updated,
so change the code accordingly.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Currently the TI thermal driver sets the sensor update interval based
on the polling of the thermal zone. In order to get the polling rate,
the code inspects the thermal zone device structure internals, thus
breaking the self-encapsulation of the thermal framework core
framework.
On the other side, we see the common polling rates set in the device
tree for the platforms using this driver are 500 or 1000 ms.
Setting the polling rate to 250 ms would be far enough to cover the
combination we found in the device tree.
Instead of accessing the thermal zone device structure polling rate,
let's use a common update interval of 250 ms for the driver.
Cc: Keerthy <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Acked-by: Keerthy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The thermal->tzp->no_hwmon parameter is only used when calling
thermal_zone_device_register().
Setting it to 'false' before calling thermal_add_hwmon_sysfs() has no
effect.
Remove the call and again prevent the drivers to access the thermal
internals.
Cc: Maxime Coquelin <[email protected]>
Cc: Alexandre Torgue <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The db8500 driver uses the thermal zone device instead of the device
attached to it. In order to prevent the drivers to access the thermal
zone device structure, replace the thermal zone device by the driver
to show the debug message.
Cc: Linus Walleij <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The traces are exported but only local to the thermal core code. On
the other side, the traces take the thermal zone device structure as
argument, thus they have to rely on the exported thermal.h header
file. As we want to move the structure to the private thermal core
header, first we have to relocate those traces to the same place as
many drivers do.
Cc: Steven Rostedt <[email protected]>
Suggested-by: Steven Rostedt <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
According to commit 7945f929f1a7 ("drivers: provide
devm_platform_ioremap_resource()"), convert platform_get_resource(),
devm_ioremap_resource() to a single call to Use
devm_platform_ioremap_resource(), as this is exactly what this
function does.
Signed-off-by: Yang Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The thermal framework provides an API to get the trip related to a
trip point id. We want to consolidate the generic trip points code,
thus preventing the different drivers to deal with the trip points
after they registered them.
The set_trip_temp ops will be changed regarding the above changes but
first we need to rework a bit the different implementation in the
drivers.
The goal is to prevent using the trip id but use a trip point passed
as parameter which will contain all the needed information.
As we don't have the trip point passed as parameter yet, we get the
trip point using the generic trip thermal framewrok APIs and use it to
take exactly the same decisions.
The difference with this change and the previous code is from where we
get the thermal trip point (which is the same).
No functional change intended.
Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The i.MX thermal sensor uses the generic trip points. The thermal
framework can return the critical temperature directly.
Remove the pointless get_trip_temp ops.
Signed-off-by: Daniel Lezcano <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Niklas Söderlund <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Thermal sensor reads performed immediately after thermal bank
initialization returns bogus values. This is currently tackled by returning
0 if the temperature is bogus (exceeding 200000).
Instead, add a delay between the bank init and the thermal zone device
register to properly fix this.
Signed-off-by: Michael Kao <[email protected]>
Signed-off-by: Hsin-Yi Wang <[email protected]>
Signed-off-by: Amjad Ouled-Ameur <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
|
|
Merge Intel thermal driver fixes for 6.3-rc5:
- Fix handling of two recently added module parameters in the Intel
powerclamp thermal driver (David Arcari).
- Fix one more deadlock in the int340x thermal driver (Srinivas
Pandruvada).
* thermal-intel-fixes:
thermal: intel: powerclamp: Fix cpumask and max_idle module parameters
thermal: intel: int340x: processor_thermal: Fix additional deadlock
|
|
When cpumask is specified as a module parameter the value is
overwritten by the module init routine. This can easily be fixed
by checking to see if the mask has already been allocated in the
init routine.
When max_idle is specified as a module parameter a panic will occur.
The problem is that the idle_injection_cpu_mask is not allocated until
the module init routine executes. This can easily be fixed by allocating
the cpumask if it's not already allocated.
Fixes: ebf519710218 ("thermal: intel: powerclamp: Add two module parameters")
Signed-off-by: David Arcari <[email protected]>
Reviewed-by: Srinivas Pandruvada<[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
For the sake of consistency, revert the second part of the
thermal_hwmon.c hunk from commit dec07d399cc8 ("thermal: Don't use
'device' internal thermal zone structure field") after the first
part of it has been reverted.
Link: https://lore.kernel.org/linux-pm/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
|
|
Commit 52f04f10b900 ("thermal: intel: int340x: processor_thermal: Fix
deadlock") addressed deadlock issue during user space trip update. But it
missed a case when thermal zone device is disabled when user writes 0.
Call to thermal_zone_device_disable() also causes deadlock as it also
tries to lock tz->lock, which is already claimed by trip_point_temp_store()
in the thermal core code.
Remove call to thermal_zone_device_disable() in the function
sys_set_trip_temp(), which is called from trip_point_temp_store().
Fixes: 52f04f10b900 ("thermal: intel: int340x: processor_thermal: Fix deadlock")
Signed-off-by: Srinivas Pandruvada <[email protected]>
Cc: 6.2+ <[email protected]> # 6.2+
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
When the hwmon device node of a thermal zone device is not found,
using hwmon->device causes a kernel NULL pointer dereference.
Fixes: dec07d399cc8 ("thermal: Don't use 'device' internal thermal zone structure field")
Reported-by: Preble Adam C <[email protected]>
Signed-off-by: Zhang Rui <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The lockdep_assert_held() calls added to cooling_device_stats_setup()
and cooling_device_stats_destroy() by commit 790930f44289 ("thermal:
core: Introduce thermal_cooling_device_update()") trigger false-positive
lockdep reports in code paths that are not subject to race conditions
(before cooling device registration and after cooling device removal).
For this reason, remove the lockdep_assert_held() calls from both
cooling_device_stats_setup() and cooling_device_stats_destroy() and
add one to thermal_cooling_device_stats_reinit() that has to be called
under the cdev lock.
Fixes: 790930f44289 ("thermal: core: Introduce thermal_cooling_device_update()")
Link: https://lore.kernel.org/linux-acpi/[email protected]
Reported-by: Imre Deak <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Merge an x86_pkg_temp_thermal Intel thermal driver fix (Zhang Rui).
* thermal-intel:
thermal: intel: x86_pkg_temp_thermal: Add lower bound check for sysfs input
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are a small set of USB and Thunderbolt driver fixes for reported
problems and a documentation update, for 6.3-rc4.
Included in here are:
- documentation update for uvc gadget driver
- small thunderbolt driver fixes
- cdns3 driver fixes
- dwc3 driver fixes
- dwc2 driver fixes
- chipidea driver fixes
- typec driver fixes
- onboard_usb_hub device id updates
- quirk updates
All of these have been in linux-next with no reported problems"
* tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
usb: dwc2: fix a race, don't power off/on phy for dual-role mode
usb: dwc2: fix a devres leak in hw_enable upon suspend resume
usb: chipidea: core: fix possible concurrent when switch role
usb: chipdea: core: fix return -EINVAL if request role is the same with current role
thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit
thunderbolt: Disable interrupt auto clear for rings
thunderbolt: Use const qualifier for `ring_interrupt_index`
usb: gadget: Use correct endianness of the wLength field for WebUSB
uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver
usb: cdns3: Fix issue with using incorrect PCI device function
usb: cdnsp: Fixes issue with redundant Status Stage
MAINTAINERS: make me a reviewer of USB/IP
thunderbolt: Use scale field when allocating USB3 bandwidth
thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers
thunderbolt: Call tb_check_quirks() after initializing adapters
thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access
thunderbolt: Fix memory leak in margining
usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
docs: usb: Add documentation for the UVC Gadget
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- it87: Fix voltage scaling for chips with 10.9mV ADCs
- xgene: Fix ioremap and memremap leak
- peci/cputemp: Fix miscalculated DTS temperature for SKX
- hwmon core: fix potential sensor registration failure with thermal
subsystem if of_node is missing
* tag 'hwmon-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon (it87): Fix voltage scaling for chips with 10.9mV ADCs
hwmon: (xgene) Fix ioremap and memremap leak
hwmon: fix potential sensor registration fail if of_node is missing
hwmon: (peci/cputemp) Fix miscalculated DTS for SKX
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"As usual, most of the bug fixes address issues in the devicetree
files, and out of these, most are for the Qualcomm and NXP platforms,
including:
- A missing 'reserved-memory' property on LG G Watch R that is needed
to prevent clashing with firmware
- Annotations for cache coherency on multiple machines
- Corrections for pinctrl, regulator, clock, iommu and power domain
properties for i.MX and Qualcomm to correctly reflect the hardware
settings
- Firmware file names on multiple machines SA8540P Ride board
- An incompatible change to the qcom vadc driver requires adding
individual labels
- Fix EQoS PHY reset GPIO by dropping the deprecated/wrong property
and switch to the new bindings.
- A fix for PCI bus address translation Tegra194 and Tegra234.
There are also a couple of device driver fixes, addressing:
- A race condition in the amdtee driver
- A performance regression in the Qualcomm 'llcc' driver
- An unitialized variable use NXP i.MX 'weim' driver
- Error handling issues in Qualcomm 'rmtfs', and 'scm' drivers and
the Arm scmi firmware driver"
* tag 'arm-fixes-6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
arm64: dts: qcom: sc8280xp-x13s: mark bob regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s12b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s10b regulator as always-on
arm64: dts: qcom: sc8280xp-x13s: mark s11b regulator as always-on
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
bus: imx-weim: fix branch condition evaluates to a garbage value
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
arm64: dts: imx93: Fix eqos properties
arm64: dts: imx8mp: Fix LCDIF2 node clock order
arm64: dts: imx8mm-nitrogen-r2: fix WM8960 clock name
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
firmware: qcom: scm: fix bogus irq error at probe
arm64: dts: qcom: sm8550: Mark UFS controller as cache coherent
arm64: dts: qcom: sa8540p-ride: correct name of remoteproc_nsp0 firmware
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8350: Mark UFS controller as cache coherent
arm64: dts: qcom: sm8550: fix LPASS pinctrl slew base address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- rk817: Fix compiler warning
- cros_usbpd-charger: Fix excessive error printing
- axp288_fuel_gauge: handle platform_get_irq error
- bq24190 and da9150: Fix race condition in remove path
* tag 'for-v6.3-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition
power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition
power: supply: axp288_fuel_gauge: Added check for negative values
power: supply: cros_usbpd: reclassify "default case!" as debug
power: supply: rk817: Fix unsigned comparison with less than zero
|
|
Pull drm fixes from Daniel Vetter:
- usual pile of fixes for amdgpu & i915
- probe error handling fixes for meson, lt8912b bridge
- the host1x patch from Arnd
- panel-orientation fix for Lenovo Book X90F
* tag 'drm-fixes-2023-03-24' of git://anongit.freedesktop.org/drm/drm: (23 commits)
gpu: host1x: fix uninitialized variable use
drm/amd/display: Set dcn32 caps.seamless_odm
drm/amd/display: fix wrong index used in dccg32_set_dpstreamclk
drm/amdgpu/nv: Apply ASPM quirk on Intel ADL + AMD Navi
drm/amd/display: remove outdated 8bpc comments
drm/amdgpu/gfx: set cg flags to enter/exit safe mode
drm/amdgpu: Force signal hw_fences that are embedded in non-sched jobs
drm/amdgpu: add mes resume when do gfx post soft reset
drm/amdgpu: skip ASIC reset for APUs when go to S4
drm/amdgpu: reposition the gpu reset checking for reuse
drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found
drm/meson: fix missing component unbind on bind errors
drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90F
Revert "drm/i915/hwmon: Enable PL1 power limit"
drm/i915: Update vblank timestamping stuff on seamless M/N change
drm/i915: Fix format for perf_limit_reasons
drm/i915/gt: perform uc late init after probe error injection
drm/i915/active: Fix missing debug object activation
drm/i915/guc: Fix missing ecodes
drm/i915/mtl: Disable MC6 for MTL A step
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM thin to work as a swap device by using 'limit_swap_bios' DM
target flag (initially added to allow swap to dm-crypt) to throttle
the amount of outstanding swap bios.
- Fix DM crypt soft lockup warnings by calling cond_resched() from the
cpu intensive loop in dmcrypt_write().
- Fix DM crypt to not access an uninitialized tasklet. This fix allows
for consistent handling of IO completion, by _not_ needlessly punting
to a workqueue when tasklets are not needed.
- Fix DM core's alloc_dev() initialization for DM stats to check for
and propagate alloc_percpu() failure.
* tag 'for-6.3/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm stats: check for and propagate alloc_percpu failure
dm crypt: avoid accessing uninitialized tasklet
dm crypt: add cond_resched() to dmcrypt_write()
dm thin: fix deadlock when swapping to thin device
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Send Identify with CNS 06h only to I/O controllers (Martin
George)
- Fix nvme_tcp_term_pdu to match spec (Caleb Sander)
- Pass in issue_flags for uring_cmd, so the end_io handlers don't need
to assume what the right context is (me)
- Fix for ublk, marking it as LIVE before adding it to avoid races on
the initial IO (Ming)
* tag 'block-6.3-2023-03-24' of git://git.kernel.dk/linux:
nvme-tcp: fix nvme_tcp_term_pdu to match spec
nvme: send Identify with CNS 06h only to I/O controllers
block/io_uring: pass in issue_flags for uring_cmd task_work handling
block: ublk_drv: mark device as LIVE before adding disk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These address two recent regressions related to thermal control.
Specifics:
- Restore the thermal core behavior regarding zero-temperature trip
points to avoid a driver regression (Ido Schimmel)
- Fix a recent regression in the ACPI processor driver preventing it
from changing the number of CPU cooling device states exposed via
sysfs after the given CPU cooling device has been registered
(Rafael Wysocki)"
* tag 'thermal-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Restore behavior regarding invalid trip points
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
thermal: core: Introduce thermal_cooling_device_update()
thermal: core: Introduce thermal_cooling_device_present()
ACPI: processor: Reorder acpi_processor_driver_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These add new ACPI IRQ override and backlight detection quirks.
Specifics:
- Add backlight=native DMI quirk for Acer Aspire 3830TG to the ACPI
backlight driver (Hans de Goede)
- Add an ACPI IRQ override quirk for Medion S17413 (Aymeric Wibo)"
* tag 'acpi-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: resource: Add Medion S17413 to IRQ override quirk
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Set the NX compat flag for arm64 and zboot, to ensure compatibility
with EFI firmware that complies with tightening requirements imposed
across the ecosystem.
- Improve identification of Ampere Altra systems based on SMBIOS data.
- Fix some issues related to the EFI framebuffer that were introduced
as a result from some refactoring related to zboot and the merge with
sysfb.
- Makefile tweak to avoid rebuilding vmlinuz unnecessarily.
- Fix efi_random_alloc() return value on out of memory condition.
* tag 'efi-fixes-for-v6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/libstub: randomalloc: Return EFI_OUT_OF_RESOURCES on failure
efi/libstub: Use relocated version of kernel's struct screen_info
efi/libstub: zboot: Add compressed image to make targets
efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L
efi: sysfb_efi: Fix DMI quirks not working for simpledrm
efi/libstub: smbios: Drop unused 'recsize' parameter
arm64: efi: Use SMBIOS processor version to key off Ampere quirk
efi/libstub: smbios: Use length member instead of record struct size
efi: earlycon: Reprobe after parsing config tables
arm64: efi: Set NX compat flag in PE/COFF header
efi/libstub: arm64: Remap relocated image with strict permissions
efi/libstub: zboot: Mark zboot EFI application as NX compatible
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/fixes
Qualcomm driver fixes for v6.3
Support for the secure world interrupting the SCM driver drive the wait
queue mechanism was recently introduced, but most platforms doesn't have
this mechanism and an error should not be printed in the log.
The rmtfs_mem driver recently gained support for assigning the region to
multiple VMIDs, but accidentally removed the support for running without
assignment. A couple of changes are introducd to correct this.
The SC8280XP LLCC slice configuration is wrong, reslting in incorrect
configuration of the hardware. The table is corrected, based on the
datasheet.
* tag 'qcom-driver-fixes-for-6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
firmware: qcom: scm: fix bogus irq error at probe
soc: qcom: rmtfs: handle optional qcom,vmid correctly
soc: qcom: rmtfs: fix error handling reading qcom,vmid
soc: qcom: llcc: Fix slice configuration values for SC8280XP
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- fix build warning
- avoid concurrent accesses to the Xen PV console ring page
* tag 'for-linus-6.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/PVH: avoid 32-bit build warning when obtaining VGA console info
hvc/xen: prevent concurrent accesses to the shared ring
|
|
Merge a fix for a recent thermal-related regression in the ACPI
processor driver.
* thermal-acpi:
ACPI: processor: thermal: Update CPU cooling devices on cpufreq policy changes
thermal: core: Introduce thermal_cooling_device_update()
thermal: core: Introduce thermal_cooling_device_present()
ACPI: processor: Reorder acpi_processor_driver_init()
|
|
Merge an ACPI backlight quirk for Acer Aspire 3830TG (Hans de Goede).
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG
|
|
Add DMI info of the Medion S17413 (board M1xA) to the IRQ override
quirk table. This fixes the keyboard not working on these laptops.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Signed-off-by: Aymeric Wibo <[email protected]>
[ rjw: Fixed up white space ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform fix from Tzung-Bi Shih:
"Fix a kernel data leak vulnerability"
* tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of regular driver fixes"
* tag 'i2c-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()
i2c: hisi: Only use the completion interrupt to finish the transfer
i2c: hisi: Avoid redundant interrupts
i2c: mxs: ensure that DMA buffers are safe for DMA
i2c: imx-lpi2c: check only for enabled interrupt flags
i2c: imx-lpi2c: clean rx/tx buffers upon new message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi and bluetooth.
Current release - regressions:
- wifi: mt76: mt7915: add back 160MHz channel width support for
MT7915
- libbpf: revert poisoning of strlcpy, it broke uClibc-ng
Current release - new code bugs:
- bpf: improve the coverage of the "allow reads from uninit stack"
feature to fix verification complexity problems
- eth: am65-cpts: reset PPS genf adj settings on enable
Previous releases - regressions:
- wifi: mac80211: serialize ieee80211_handle_wake_tx_queue()
- wifi: mt76: do not run mt76_unregister_device() on unregistered hw,
fix null-deref
- Bluetooth: btqcomsmd: fix command timeout after setting BD address
- eth: igb: revert rtnl_lock() that causes a deadlock
- dsa: mscc: ocelot: fix device specific statistics
Previous releases - always broken:
- xsk: add missing overflow check in xdp_umem_reg()
- wifi: mac80211:
- fix QoS on mesh interfaces
- fix mesh path discovery based on unicast packets
- Bluetooth:
- ISO: fix timestamped HCI ISO data packet parsing
- remove "Power-on" check from Mesh feature
- usbnet: more fixes to drivers trusting packet length
- wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
- Bluetooth: btintel: iterate only bluetooth device ACPI entries
- eth: iavf: fix inverted Rx hash condition leading to disabled hash
- eth: igc: fix the validation logic for taprio's gate list
- dsa: tag_brcm: legacy: fix daisy-chained switches
Misc:
- bpf: adjust insufficient default bpf_jit_limit to account for
growth of BPF use over the last 5 years
- xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
no driver support"
* tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
Bluetooth: HCI: Fix global-out-of-bounds
Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
Bluetooth: L2CAP: Fix responding with wrong PDU type
Bluetooth: btqcomsmd: Fix command timeout after setting BD address
Bluetooth: btinel: Check ACPI handle for NULL before accessing
net: mdio: thunder: Add missing fwnode_handle_put()
net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case
net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
net: asix: fix modprobe "sysfs: cannot create duplicate filename"
gve: Cache link_speed value from device
tools: ynl: Fix genlmsg header encoding formats
net: enetc: fix aggregate RMON counters not showing the ranges
Bluetooth: Remove "Power-on" check from Mesh feature
Bluetooth: Fix race condition in hci_cmd_sync_clear
Bluetooth: btintel: Iterate only bluetooth device ACPI entries
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
Bluetooth: btusb: Remove detection of ISO packets over bulk
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers.
The core fix adds a UFS device to an existing quirk to avoid a huge
delay on boot"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()
scsi: qla2xxx: Synchronize the IOCB count to be in order
scsi: qla2xxx: Perform lockless command completion in abort path
scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR
|
|
The error handling for platform_get_irq() failing no longer
works after a recent change, clang now points this out with
a warning:
drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized]
if (syncpt_irq < 0)
^~~~~~~~~~
Fix this by removing the variable and checking the correct
error status.
Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling")
Reviewed-by: Nathan Chancellor <[email protected]>
Reviewed-by: Mikko Perttunen <[email protected]>
Reported-by: "kernelci.org bot" <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.3-2023-03-23:
amdgpu:
- S4 fix
- Soft reset fixes
- SR-IOV fix
- Remove an out of date comment in the DC code
- ASPM fix
- DCN 3.2 fixes
Signed-off-by: Daniel Vetter <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v6.3-rc4:
- Fix an MTL workaround
- Fix fbdev obj locking before vma pin
- Fix state inheritance tracking in initial commit
- Fix missing GuC error capture codes
- Fix missing debug object activation
- Fix uc init late order relative to probe error injection
- Fix perf limit reasons formatting
- Fix vblank timestamp update on seamless M/N changes
Signed-off-by: Daniel Vetter <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* fixes for bind and probing error handling for meson, lt8912b bridge
* panel-orientation fixes for Lenovo Book X90F
Signed-off-by: Daniel Vetter <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323082401.GA8371@linux-uq9g
|
|
It is possible to peep kernel page's data by providing larger `insize`
in struct cros_ec_command[1] when invoking EC host commands.
Fix it by using zeroed memory.
[1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74
Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Tzung-Bi Shih <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|