aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-11-23Merge tag 'drm-intel-next-2023-11-23' of ↵Daniel Vetter111-1945/+4318
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 feature pull for v6.8: Features and functionality: - Major DP MST improvements on bandwidth management, DSC (Imre, Stan, Ville) - DP panel replay enabling (Animesh, Jouni) - MTL C20 phy state verification (Mika) - MTL DP DSC fractional bpp support (Ankit, Vandita, Swati, Imre) - Audio fastset support (Ville) Refactoring and cleanups: - Use dma fence interfaces instead of i915_sw_fence (Jouni) - Separate gem and display code (Jouni, Juha-Pekka) - AUX register macro refactoring (Jani) - Separate display module/device parameters from the rest (Jouni) - Move display capabilities debugfs under display (Vinod) - Makefile cleanup (Jani) - Register cleanups (Ville) - Enginer iterator cleanups (Tvrtko) - Move display lock inits under display/ (Jani) - VLV/CHV DPIO PHY register and interface refactoring (Jani) - DSI VBT sequence refactoring (Jani, Andy Shevchenko) - C10/C20 PHY PLL hardware readout and calculation abstractions (Lucas) - DPLL code cleanups (Ville) - Cleanup PXP plane protection checks (Jani) Fixes: - Replace VLV/CHV DSI GPIO direct access with proper GPIO API usage (Andy Shevchenko) - Fix VLV/CHV DSI GPIO wrong initial value (Hans de Goede) - Fix UHBR data, link M/N/TU and PBN values (Imre) - Fix HDCP state on an enable/disable cycle (Suraj) - Fix DP MST modeset sequence to be according to spec (Ville) - Improved atomicity for multi-pipe commits (Ville) - Update URLs in i915 MAINTAINERS entry and code (Jani) - Check for VGA converter presence in eDP probe (Ville) - Fix surface size checks (Ville) - Fix LNL port/phy assignment (Lucas) - Reset C10/C20 message bus harder to avoid sporadic failures (Mika) - Fix bogus VBT HDMI level shift on BDW (Ville) - Add workaround for LNL underruns when enabling FBC (Vinod) - DSB refactoring (Animesh) - DPT refactoring (Juha-Pekka) - Disable DSC on DP MST on ICL (Imre) - Fix PSR VSC packet setup timing (Mika) - Fix LUT rounding and conversions (Ville) DRM core display changes: - DP MST fixes, helpers, refactoring to support bandwidth management (Imre) - DP MST PBN divider value refactoring and fixes (Imre) - DPCD register definitions (Ankit, Imre) - Add helper to get DSC bpp precision (Ankit) - Fix color LUT rounding (Ville) From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87v89sl2ao.fsf@intel.com [sima: Some conflicts in the amdgpu dp mst code] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-11-23Merge tag 'drm-misc-next-2023-11-23' of ↵Daniel Vetter104-194/+33021
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.8: UAPI Changes: Cross-subsystem Changes: Core Changes: - Drop deprecated drm_kms_helper.edid_firmware module parameter Driver Changes: - Convert platform drivers remove callback to return void - imagination: Introduction of the Imagination GPU Support - rockchip: - rk3066_hdmi: Convert to atomic - vop2: Support NV20 and NV30 - panel: - elida-kd35t133: PM reworks - New panels: Powkiddy RK2023 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/drzvrbsej2txf6a6npc4ukkpadj3wio7edkjbgsfdm4l33szpe@fgwtdy5z5ev7
2023-11-23drm/i915: Fix glk+ degamma LUT conversionsVille Syrjälä1-26/+28
The current implementation of change_lut_val_precision() is just a convoluted way of shifting by 8. Implement the proper rounding by just using drm_color_lut_extract() and intel_color_lut_pack() like everyone else does. And as the uapi can't handle >=1.0 values but the hardware can we need to clamp the results appropriately in the readout path. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-5-ville.syrjala@linux.intel.com Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-23drm/i915: s/clamp()/min()/ in i965_lut_11p6_max_pack()Ville Syrjälä1-1/+1
Use min() instead of clamp() since the color values involved are unsigned. No functional changes. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-4-ville.syrjala@linux.intel.com Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-23drm/i915: Adjust LUT rounding rulesVille Syrjälä1-8/+6
drm_color_lut_extract() rounding was changed to follow the OpenGL int<->float conversion rules. Adjust intel_color_lut_pack() to match. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231013131402.24072-3-ville.syrjala@linux.intel.com Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2023-11-23drm/i915/display: In intel_framebuffer_init switch to use intel_bo_to_drm_boJuha-Pekka Heikkila1-1/+1
We are preparing for Xe driver. I915 and Xe object implementation are differing. Use intel_bo_to_drm_bo instead of &obj->base. Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116150225.204233-3-juhapekka.heikkila@gmail.com
2023-11-23drm/i915/display: in skl_surf_address check for dpt-vmaJuha-Pekka Heikkila1-1/+2
touch dpt_vma->node only if dpt-vma is not NULL Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116150225.204233-2-juhapekka.heikkila@gmail.com
2023-11-23drm/i915/display: Separate xe and i915 common dpt code into own fileJuha-Pekka Heikkila6-28/+49
Here created intel_dpt_common.c to hold intel_dpt_configure which is needed for both xe and i915. Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116150225.204233-1-juhapekka.heikkila@gmail.com
2023-11-23drm/i915: Implement audio fastsetVille Syrjälä1-22/+10
There's no real reason why we'd need a full modeset for audio changes. So let's allow audio to be toggled during fastset. In case the ELD changes while has_audio isn't changing state we force both audio disable and enable so the new ELD gets propagated to the audio driver. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-12-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Push audio_{enable,disable}() to the pre/post pane update stageVille Syrjälä1-7/+24
Relocate the audio enable/disable from the full modeset hooks into the common pre/post plane update stage of the commit. Audio fastset is within easy reach now. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-11-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Hoist the encoder->audio_{enable,disable}() calls higher upVille Syrjälä5-19/+49
Push the encoder->audio_{enable,disable}() calls out from the encoder->{enable,disable}() hooks. Moving towards audio fastset. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-10-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Convert audio enable/disable into encoder vfuncsVille Syrjälä6-19/+44
Add encoder vfuncs for audio enable/disable. This will allow audio to be enabled/disabled during fastsets. An encoder hook is necessary as on pre-hsw platforms different encoder types implement audio in different ways. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-9-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Split g4x+ HDMI audio presence detect from port enableVille Syrjälä1-7/+11
Follow the hsw+ approach toggle the audio presence detect when we set up the ELD, instead of doing it when turning the port on/off. This will facilitate audio enable/disable to happen during fastsets instead of requiring a full modeset. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-8-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Split g4x+ DP audio presence detect from port enableVille Syrjälä1-3/+15
Follow the hsw+ approach toggle the audio presence detect when we set up the ELD, instead of doing it when turning the port on/off. This will facilitate audio enable/disable to happen during fastsets instead of requiring a full modeset. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-7-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Wrap g4x+ DP/HDMI audio enable/disableVille Syrjälä2-21/+53
Put a wrapper around the intel_audio_codec_{enable,disable}() calls in the g4x+ DP/HDMI code. We shall move the presence detect enable/disable into the wrappers later. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-6-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Push audio enable/disable further outVille Syrjälä3-16/+12
Push the audio enable/disable to be the last/first thing respectively that is done in the encoder enable/disable hooks. The goal is to move it further out of these encoder hooks entirely. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-5-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Polish some RMWsVille Syrjälä1-11/+8
Doing the if-else around RMWs is kinda silly. Just set/clear the apporiate bits with a single RMW. Also unify the coding style a bit icl_wa_cursorclkgating() while at it. Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-4-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Call intel_pre_plane_updates() also for pipes getting enabledVille Syrjälä1-1/+2
We used to call intel_pre_plane_updates() for any pipe going through a modeset whether the pipe was previously enabled or not. This in fact needed to apply all the necessary clock gating workarounds/etc. Restore the correct behaviour. Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
2023-11-23drm/i915: Check pipe active state in {planes,vrr}_{enabling,disabling}()Ville Syrjälä1-0/+12
{planes,vrr}_{enabling,disabling}() are supposed to indicate whether the specific hardware feature is supposed to be enabling or disabling. That can only makes sense if the pipe is active overall. So check for that before we go poking at the hardware. I think we're semi-safe currently on due to: - intel_pre_plane_update() doesn't get called when the pipe was not-active prior to the commit, but this is actually a bug. This saves vrr_disabling(), and vrr_enabling() is called from deeper down where we have already checked hw.active. - active_planes mirrors the crtc's hw.active Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-2-ville.syrjala@linux.intel.com
2023-11-23drm/imagination: Add firmware trace to debugfsSarah Walker9-0/+723
Firmware trace is exposed at /sys/debug/dri/<dev_nr>/pvr_fw/trace_0. Trace is enabled via the group mask at /sys/debug/dri/<dev_nr>/pvr_params/fw_trace_mask. Changes since v8: - Corrected license identifiers Changes since v3: - Use drm_dev_{enter,exit} Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/009cf9fee347fa96c8a665dc368fc54a5ffceff0.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add firmware trace headerSarah Walker1-0/+1648
Changes since v8: - Corrected license identifiers Changes since v5: - Split up header commit due to size Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/c0fc28b2df394584afe3cc1b320140b01e17b322.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement job submission and schedulingSarah Walker15-4/+3438
Implement job submission ioctl. Job scheduling is implemented using drm_sched. Jobs are submitted in a stream format. This is intended to allow the UAPI data format to be independent of the actual FWIF structures in use, which vary depending on the GPU in use. The stream formats are documented at: https://gitlab.freedesktop.org/mesa/mesa/-/blob/f8d2b42ae65c2f16f36a43e0ae39d288431e4263/src/imagination/csbgen/rogue_kmd_stream.xml Changes since v8: - Updated for upstreamed DRM scheduler changes - Removed workaround code for the pending_list previously being updated after run_job() returned - Fixed null deref in pvr_queue_cleanup_fw_context() for bad stream ptr given to create_context ioctl - Corrected license identifiers Changes since v7: - Updated for v8 "DRM scheduler changes for XE" patchset Changes since v6: - Fix fence handling in pvr_sync_signal_array_add() - Add handling for SUBMIT_JOB_FRAG_CMD_DISABLE_PIXELMERGE flag - Fix missing dma_resv locking in job submit path Changes since v5: - Fix leak in job creation error path Changes since v4: - Use a regular workqueue for job scheduling Changes since v3: - Support partial render jobs - Add job timeout handler - Split sync handling out of job code - Use drm_dev_{enter,exit} Changes since v2: - Use drm_sched for job scheduling Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Co-developed-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Link: https://lore.kernel.org/r/c98dab7a5f5fb891fbed7e4990d19b5d13964365.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement context creation/destruction ioctlsSarah Walker11-2/+1431
Implement ioctls for the creation and destruction of contexts. Contexts are used for job submission and each is associated with a particular job type. Changes since v8: - Fixed one error path in pvr_stream_process_1() - Corrected license identifiers Changes since v5: - Fix context release in final error path in pvr_context_create() Changes since v3: - Use drm_dev_{enter,exit} Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/ac474a1f7dda2582d290798e4837140a2989aa2a.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement free list and HWRT create and destroy ioctlsSarah Walker8-4/+1678
Implement ioctls to create and destroy free lists and HWRT datasets. Free lists are used for GPU-side memory allocation during geometry processing. HWRT datasets are the FW-side structures representing render targets. Changes since v8: - Corrected license identifiers Changes since v6: - Fix out-of-bounds shift in get_cr_multisamplectl_val() Changes since v4: - Remove use of drm_gem_shmem_get_pages() Changes since v3: - Support free list grow requests from FW - Use drm_dev_{enter,exit} Co-developed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Co-developed-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Link: https://lore.kernel.org/r/919358c5887a7628da588c455a5bb7e3ea4b47ae.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement MIPS firmware processor and MMU supportSarah Walker8-2/+572
Add support for the MIPS firmware processor, used in the Series AXE GPU. The MIPS firmware processor uses a separate MMU to the rest of the GPU, so this patch adds support for that as well. Changes since v8: - Corrected license identifiers Changes since v6: - Fix integer overflow in VM map error path Changes since v5: - Use alloc_page() when allocating MIPS pagetable Changes since v3: - Get regs resource (removed from GPU resources commit) Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/a114f7b3e97cb07460c7f2842901716a9207b0c4.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement firmware infrastructure and META FW supportSarah Walker18-24/+4015
The infrastructure includes parsing of the firmware image, initialising FW-side structures, handling the kernel and firmware command ringbuffers and starting & stopping the firmware processor. This patch also adds the necessary support code for the META firmware processor. Changes since v8: - Fix documentation for pvr_fwccb_process() - Corrected license identifiers Changes since v6: - Add a minimum retry count to pvr_kccb_reserve_slot_sync() Changes since v5: - Add workaround for BRN 71242 - Attempt to recover GPU on MMU flush command failure Changes since v4: - Remove use of drm_gem_shmem_get_pages() - Remove interrupt resource name Changes since v3: - Hard reset FW processor on watchdog timeout - Switch to threaded IRQ - Rework FW object creation/initialisation to aid hard reset - Added MODULE_FIRMWARE() - Use drm_dev_{enter,exit} Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Link: https://lore.kernel.org/r/bb52a8dc84f296b37dc6668dfe8fbaf2ba551139.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Implement power managementSarah Walker7-3/+374
Add power management to the driver, using runtime pm. The power off sequence depends on firmware commands which are not implemented in this patch. Changes since v8: - Corrected license identifiers Changes since v5: - Use RUNTIME_PM_OPS() to declare PM callbacks - Add Kconfig dependency on CONFIG_PM Changes since v4: - Suspend runtime PM before unplugging device on rmmod Changes since v3: - Don't power device when calling pvr_device_gpu_fini() - Documentation for pvr_dev->lost has been improved - pvr_power_init() renamed to pvr_watchdog_init() - Use drm_dev_{enter,exit} Changes since v2: - Use runtime PM - Implement watchdog Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/e09af4ef1ff514e1d6d7f97c7c5032c643c56f9c.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add GEM and VM related codeDonald Robson11-11/+4756
Add a GEM implementation based on drm_gem_shmem, and support code for the PowerVR GPU MMU. The GPU VA manager is used for address space management. Changes since v8: - Updated for changes to drm_gpuvm - Switched to dma_resv locking for vm ops - Removed linked lists for collecting BOs in vm_context and for freeing after ops. This is now done internally in drm_gpuvm - Corrected license identifiers Changes since v7: - kernel-doc fixes - Remove prefixes from DRM_PVR_BO_* flags - CREATE_BO ioctl now returns an error if provided size isn't page aligned - Optimised MMU flushes Changes since v6: - Don't initialise kernel_vm_ctx when using MIPS firmware processor - Rename drm_gpuva_manager uses to drm_gpuvm - Sync GEM object to device on creation Changes since v5: - Use WRITE_ONCE() when writing to page tables - Add memory barriers to page table insertion - Fixed double backing page alloc on page table objects - Fix BO mask checks in DRM_IOCTL_PVR_CREATE_BO handler - Document use of pvr_page_table_*_idx when preallocing page table objs - Remove pvr_vm_gpuva_mapping_init() - Remove NULL check for unmap op in remap function - Protect gem object with mutex during drm_gpuva_link/unlink - Defer free or release of page table pages until after TLB flush - Use drm_gpuva_op_remap_get_unmap_range() helper Changes since v4: - Correct sync function in vmap/vunmap function documentation - Update for upstream GPU VA manager - Fix missing frees when unmapping drm_gpuva objects - Always zero GEM BOs on creation Changes since v3: - Split MMU and VM code - Register page table allocations with kmemleak - Use drm_dev_{enter,exit} Changes since v2: - Use GPU VA manager - Use drm_gem_shmem Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Co-developed-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Link: https://lore.kernel.org/r/3c96dd170efe759b73897e3675d7310a7c4b06d0.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add GPU ID parsing and firmware loadingSarah Walker10-2/+1925
Read the GPU ID register at probe time and select the correct features/quirks/enhancements. Use the GPU ID to form the firmware file name and load the firmware. The features/quirks/enhancements arrays are currently hardcoded in the driver for the supported GPUs. We are looking at moving this information to the firmware image. Changes since v8: - Corrected license identifiers Changes since v7: - Fix kerneldoc for pvr_device_info_set_enhancements() Changes since v5: - Add BRN 71242 to device info Changes since v4: - Retrieve device information from firmware header - Pull forward firmware header parsing from FW infrastructure patch - Use devm_add_action_or_reset to release firmware Changes since v3: - Use drm_dev_{enter,exit} Co-developed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Co-developed-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Link: https://lore.kernel.org/r/1ff76f7a5b45c742279c78910f8491b8a5e7f6e6.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add FWIF headersSarah Walker10-0/+3832
Changes since v8: - Corrected license identifiers Changes since v7: - Add padding to struct rogue_fwif_ccb_ctl to place read and write offsets in different cache lines Changes since v5: - Split up header commit due to size - Add BRN 71242 to device info Changes since v4: - Add FW header device info Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/aa681533a02bd2d46af17a6a6010f4d6048fbb0a.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add firmware and MMU related headersSarah Walker5-0/+998
Changes since v8: - Corrected license identifiers Changes since v5: - Split up header commit due to size Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/23ee233dfbe6f2239328f8201fd6d8c1017cea58.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add GPU register headersSarah Walker3-0/+6531
Changes since v8: - Corrected license identifiers Changes since v5: - Split up header commit due to size Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/9f1fbf6c18e9644ac10712e05893701f06aee6ae.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Get GPU resourcesSarah Walker4-1/+317
Acquire clock and register resources, and enable/map as appropriate. Changes since v8: - Corrected license identifiers Changes since v3: - Remove regulator resource (not used on supported platform) - Use devm helpers - Use devm_clk_get_optional() for optional clocks - Don't prepare clocks on resource acquisition - Drop pvr_device_clk_core_get_freq() helper - Drop pvr_device_reg_fini() - Drop NULLing of clocks in pvr_device_clk_init() - Use dev_err_probe() on clock acquisition failure - Remove PVR_CR_READ/WRITE helper macros - Improve documentation for GPU clocks - Remove regs resource (not used in this commit) Co-developed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/579027bd5be4eb3218c9784050ded2326ecbc352.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/imagination: Add skeleton PowerVR driverSarah Walker7-0/+711
This adds the basic skeleton of the driver. The driver registers itself with DRM on probe. Ioctl handlers are currently implemented as stubs. Changes since v8: - Corrected license identifiers Changes since v5: - Update compatible string & description to match marketing name - Checkpatch fixes in to/from_pvr_device/file macros Changes since v3: - Clarify supported GPU generations in driver description - Use drm_dev_unplug() when removing device - Change from_* and to_* functions to macros - Fix IS_PTR/PTR_ERR confusion in pvr_probe() - Remove err_out labels in favour of direct returning - Remove specific am62 compatible match string - Drop MODULE_FIRMWARE() Co-developed-by: Frank Binns <frank.binns@imgtec.com> Signed-off-by: Frank Binns <frank.binns@imgtec.com> Co-developed-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Matt Coster <matt.coster@imgtec.com> Signed-off-by: Sarah Walker <sarah.walker@imgtec.com> Signed-off-by: Donald Robson <donald.robson@imgtec.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/fed8a77e29620a61aed2684f802339759082cf1b.1700668843.git.donald.robson@imgtec.com Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-23drm/i915/display: Do not check psr2 if psr/panel replay is not supportedJouni Högander1-0/+3
Do not continue to psr2 checks if psr or panel replay is not supported. Cc: Animesh Manna <animesh.manna@intel.com> Fixes: b8cf5b5d266e ("drm/i915/panelreplay: Initializaton and compute config for panel replay") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9670 Signed-off-by: Jouni Högander <jouni.hogander@intel.com> Reviewed-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231120130214.3332726-1-jouni.hogander@intel.com
2023-11-23drm/i915/display: Use int type for entry_setup_framesMika Kahola1-1/+1
entry_setup_frames variable is defined as u8. However, the function call intel_psr_entry_setup_frames() can return negative error code. There is a type mismatch here, so let's switch to use int here as well. Fixes: 2b981d57e480 ("drm/i915/display: Support PSR entry VSC packet to be transmitted one frame earlier") Signed-off-by: Mika Kahola <mika.kahola@intel.com> Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231116090512.480373-1-mika.kahola@intel.com
2023-11-23drm/rockchip: rk3066_hdmi: include drm/drm_atomic.hArnd Bergmann1-0/+1
Without this header, the newly added code fails to build: drivers/gpu/drm/rockchip/rk3066_hdmi.c: In function 'rk3066_hdmi_encoder_enable': drivers/gpu/drm/rockchip/rk3066_hdmi.c:397:22: error: implicit declaration of function 'drm_atomic_get_new_connector_state'; did you mean 'drm_atomic_helper_connector_reset'? [-Werror=implicit-function-declaration] 397 | conn_state = drm_atomic_get_new_connector_state(state, &hdmi->connector); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | drm_atomic_helper_connector_reset drivers/gpu/drm/rockchip/rk3066_hdmi.c:397:20: error: assignment to 'struct drm_connector_state *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion] 397 | conn_state = drm_atomic_get_new_connector_state(state, &hdmi->connector); | ^ drivers/gpu/drm/rockchip/rk3066_hdmi.c:401:22: error: implicit declaration of function 'drm_atomic_get_new_crtc_state'; did you mean 'drm_atomic_helper_swap_state'? [-Werror=implicit-function-declaration] 401 | crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | drm_atomic_helper_swap_state drivers/gpu/drm/rockchip/rk3066_hdmi.c:401:20: error: assignment to 'struct drm_crtc_state *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion] 401 | crtc_state = drm_atomic_get_new_crtc_state(state, conn_state->crtc); | ^ Fixes: ae3436a5e7c2 ("drm/rockchip: rk3066_hdmi: Switch encoder hooks to atomic") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20231122221838.3164349-1-arnd@kernel.org
2023-11-22drm/nouveau/fifo: Remove duplicated include in chan.cYang Li1-1/+0
./drivers/gpu/drm/nouveau/nvkm/engine/fifo/chan.c: chid.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7603 Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231122004926.84933-1-yang.lee@linux.alibaba.com
2023-11-22drm/i915/iosf: Drop unused APIsAndy Shevchenko2-20/+0
Drop unused vlv_iosf_sb_read() and vlv_iosf_sb_write(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-17-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Combine checks in mipi_exec_gpio()Andy Shevchenko1-3/+1
For a couple of cases the branches call the same bxt_gpio_set_value(). As Ville suggested they can be combined by dropping the DISPLAY_VER() check from Gen 11 to Gen 9. Do it that way. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-16-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Replace poking of CHV GPIOs behind the driver's backAndy Shevchenko1-37/+10
It's a dirty hack in the driver that pokes GPIO registers behind the driver's back. Moreoever it might be problematic as simultaneous I/O may hang the system, see the commit 0bd50d719b00 ("pinctrl: cherryview: prevent concurrent access to GPIO controllers") for the details. Taking all this into consideration replace the hack with proper GPIO APIs being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-15-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Prepare soc_gpio_set_value() to distinguish GPIO communitiesAndy Shevchenko1-10/+10
Currently soc_gpio_set_value() supports only a single indexing for GPIO pin. For CHV case, for example, we will need to distinguish community based index from the one that VBT is using. Introduce an additional parameter to soc_gpio_set_value() and its callers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-14-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Replace poking of VLV GPIOs behind the driver's backAndy Shevchenko1-70/+28
It's a dirty hack in the driver that pokes GPIO registers behind the driver's back. Moreoever it might be problematic as simultaneous I/O may hang the system, see the commit 40ecab551232 ("pinctrl: baytrail: Really serialize all register accesses") for the details. Taking all this into consideration replace the hack with proper GPIO APIs being used. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-13-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Extract common soc_gpio_set_value() helperAndy Shevchenko1-20/+26
Extract a common soc_gpio_set_value() helper that may be used by a few SoCs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-12-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Fix wrong initial value for GPIOs in bxt_gpio_set_value()Hans de Goede1-3/+1
Fix wrong initial value for GPIOs in bxt_gpio_set_value(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-11-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Remove GPIO lookup table at the end of intel_dsi_vbt_gpio_init()Hans de Goede1-16/+9
To properly deal with GPIOs used in MIPI panel sequences a temporary GPIO lookup will be used. Since there can only be 1 GPIO lookup table for the "0000:00:02.0" device this will not work if the GPIO lookup table used by intel_dsi_vbt_gpio_init() is still registered. After getting the "backlight" and "panel" GPIOs the lookup table registered by intel_dsi_vbt_gpio_init() is no longer necessary, remove it so that another temporary lookup-table for the "0000:00:02.0" device can be added. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-10-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Replace check with a (missing) MIPI sequence nameAndy Shevchenko1-1/+2
Names of the MIPI sequence steps are sequential and defined, no need to check for the gaps. However in seq_name the MIPI_SEQ_END is missing. Add it there, and drop unneeded NULL check in sequence_name(). Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-9-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Get rid of redundant 'else'Andy Shevchenko1-29/+27
In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-8-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: Replace while(1) with one with clear exit conditionAndy Shevchenko1-4/+1
Move existing condition to while(), so it will be clear on what circumstances the loop is successfully finishing. Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-7-andriy.shevchenko@linux.intel.com
2023-11-22drm/i915/dsi: bxt/icl GPIO set value do not need gpio sourceJani Nikula1-3/+3
Drop the unused parameter. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103201831.1037416-6-andriy.shevchenko@linux.intel.com
Powered by cgit, Gruvboxed by Blaster4385.