| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
tnapi is being initialized and then immediately updated and
hence the initialiation is redundant. Clean up the warning
by moving the declaration and initialization to the inside
of the for-loop.
Cleans up clang scan-build warning:
warning: Value stored to 'tnapi' during its initialization is never read
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds initial support for the STM32F7 I2C controller.
Signed-off-by: M'boumba Cedric Madianga <[email protected]>
Signed-off-by: Pierre-Yves MORDRET <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
This patch uses a more generic definition of speed enum for i2c-stm32f4
driver.
Signed-off-by: M'boumba Cedric Madianga <[email protected]>
Signed-off-by: Pierre-Yves MORDRET <[email protected]>
Reviewed-by: Ludovic BARRE <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
... and __initconst if applicable.
Based on similar work for an older kernel in the Grsecurity patch.
[JD: fix toshiba-wmi build]
[JD: add htcpen]
[JD: move __initconst where checkscript wants it]
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jean Delvare <[email protected]>
|
|
GFP_TEMPORARY was introduced by commit e12ba74d8ff3 ("Group short-lived
and reclaimable kernel allocations") along with __GFP_RECLAIMABLE. It's
primary motivation was to allow users to tell that an allocation is
short lived and so the allocator can try to place such allocations close
together and prevent long term fragmentation. As much as this sounds
like a reasonable semantic it becomes much less clear when to use the
highlevel GFP_TEMPORARY allocation flag. How long is temporary? Can the
context holding that memory sleep? Can it take locks? It seems there is
no good answer for those questions.
The current implementation of GFP_TEMPORARY is basically GFP_KERNEL |
__GFP_RECLAIMABLE which in itself is tricky because basically none of
the existing caller provide a way to reclaim the allocated memory. So
this is rather misleading and hard to evaluate for any benefits.
I have checked some random users and none of them has added the flag
with a specific justification. I suspect most of them just copied from
other existing users and others just thought it might be a good idea to
use without any measuring. This suggests that GFP_TEMPORARY just
motivates for cargo cult usage without any reasoning.
I believe that our gfp flags are quite complex already and especially
those with highlevel semantic should be clearly defined to prevent from
confusion and abuse. Therefore I propose dropping GFP_TEMPORARY and
replace all existing users to simply use GFP_KERNEL. Please note that
SLAB users with shrinkers will still get __GFP_RECLAIMABLE heuristic and
so they will be placed properly for memory fragmentation prevention.
I can see reasons we might want some gfp flag to reflect shorterm
allocations but I propose starting from a clear semantic definition and
only then add users with proper justification.
This was been brought up before LSF this year by Matthew [1] and it
turned out that GFP_TEMPORARY really doesn't have a clear semantic. It
seems to be a heuristic without any measured advantage for most (if not
all) its current users. The follow up discussion has revealed that
opinions on what might be temporary allocation differ a lot between
developers. So rather than trying to tweak existing users into a
semantic which they haven't expected I propose to simply remove the flag
and start from scratch if we really need a semantic for short term
allocations.
[1] http://lkml.kernel.org/r/[email protected]
[[email protected]: fix typo]
[[email protected]: coding-style fixes]
[[email protected]: drm/i915: fix up]
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Michal Hocko <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Acked-by: Mel Gorman <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Neil Brown <[email protected]>
Cc: "Theodore Ts'o" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
gcc-7 points out that a negative port_num value would overflow the
string buffer:
drivers/infiniband/hw/mlx4/sysfs.c: In function 'mlx4_ib_device_register_sysfs':
drivers/infiniband/hw/mlx4/sysfs.c:251:16: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=]
drivers/infiniband/hw/mlx4/sysfs.c:251:2: note: 'sprintf' output between 2 and 11 bytes into a destination of size 10
drivers/infiniband/hw/mlx4/sysfs.c:303:17: error: 'sprintf' may write a terminating nul past the end of the destination [-Werror=format-overflow=]
drivers/infiniband/hw/mlx4/sysfs.c:303:3: note: 'sprintf' output between 2 and 11 bytes into a destination of size 10
While we should be able to assume that port_num is positive here, making
the buffer one byte longer has no downsides and avoids the warning.
Fixes: c1e7e466120b ("IB/mlx4: Add iov directory in sysfs under the ib device")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
gcc-4.4.4 has issues with initialization of anonymous unions:
drivers/media/cec/cec-adap.c: In function 'cec_queue_msg_fh':
drivers/media/cec/cec-adap.c:184: error: unknown field 'lost_msgs' specified in initializer
work around this.
Fixes: 6b2bbb08747a5 ("media: cec: rework the cec event handling")
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Hans Verkuil <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add driver support for the Altera I2C Controller. The I2C
controller is soft IP for use in FPGAs.
Signed-off-by: Thor Thayer <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
The control process (NSP) may take some time to complete its
initialization. This is not a problem on most servers, but
on very fast-booting machines it may not be ready for operation
when driver probes the device. There is also a version of the
flash in the wild where NSP tries to train the links as part
of init. To wait for NSP initialization we should make sure
its resource has already been added to the resource table.
NSP adds itself there as last step of init.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Board state informs us which low-level initialization stages the card
has completed. We should wait for the card to be fully initialized
before trying to communicate with it, not only before we configure
passing traffic.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Previously we did not check the flow dissector against a list of allowed
and supported flow key dissectors. This patch introduces such a list and
correctly rejects unsupported flow keys.
Fixes: 43f84b72c50d ("nfp: add metadata to each flow offload")
Signed-off-by: Pieter Jansen van Vuuren <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
Trivial fix to spelling mistake in ubi_err error message
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
In build.c, the following pr_err calls should be terminated with
a new-line to avoid other messages being concatenated onto the end.
Signed-off-by: Ben Dooks <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
In ubi_attach_mtd_dev() the pr_err() calls should have their
messgaes terminated with a new-line to avoid other messages
being concatenated onto the end.
Signed-off-by: Ben Dooks <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
The ubi_init() function has a few error paths that use the
pr_err() to output errors. These should have new lines on
them as pr_err() does not automatically do this.
This fixes issues where if multiple mtd fail to bind to
ubi the console output starts wrapping around.
Signed-off-by: Ben Dooks <[email protected]>
Signed-off-by: Richard Weinberger <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The diff is dominated by the Allwinner A10/A20 SoCs getting converted
to the sunxi-ng framework. Otherwise, the heavy hitters are various
drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are
some other new clk drivers in here too but overall this is just a
bunch of clk drivers for various different pieces of hardware and a
collection of non-critical fixes for clk drivers.
New Drivers:
- Allwinner R40 SoCs
- Renesas R-Car Gen3 USB 2.0 clock selector PHY
- Atmel AT91 audio PLL
- Uniphier PXs3 SoCs
- ARC HSDK Board PLLs
- AXS10X Board PLLs
- STMicroelectronics STM32H743 SoCs
Removed Drivers:
- Non-compiling mb86s7x support
Updates:
- Allwinner A10/A20 SoCs converted to sunxi-ng framework
- Allwinner H3 CPU clk fixes
- Renesas R-Car D3 SoC
- Renesas V2H and M3-W modules
- Samsung Exynos5420/5422/5800 audio fixes
- Rockchip fractional clk approximation fixes
- Rockchip rk3126 SoC support within the rk3128 driver
- Amlogic gxbb CEC32 and sd_emmc clks
- Amlogic meson8b reset controller support
- IDT VersaClock 5P49V5925/5P49V6901 support
- Qualcomm MSM8996 SMMU clks
- Various 'const' applications for struct clk_ops
- si5351 PLL reset bugfix
- Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
- Assorted Tegra clk driver fixes"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits)
clk: si5351: fix PLL reset
ASoC: atmel-classd: remove aclk clock
ASoC: atmel-classd: remove aclk clock from DT binding
clk: at91: clk-generated: make gclk determine audio_pll rate
clk: at91: clk-generated: create function to find best_diff
clk: at91: add audio pll clock drivers
dt-bindings: clk: at91: add audio plls to the compatible list
clk: at91: clk-generated: remove useless divisor loop
clk: mb86s7x: Drop non-building driver
clk: ti: check for null return in strrchr to avoid null dereferencing
clk: Don't write error code into divider register
clk: uniphier: add video input subsystem clock
clk: uniphier: add audio system clock
clk: stm32h7: Add stm32h743 clock driver
clk: gate: expose clk_gate_ops::is_enabled
clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()
clk: uniphier: add PXs3 clock data
clk: hi6220: change watchdog clock source
clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
clk: cs2000: Add cs2000_set_saved_rate
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- remove .open() and .release() RTC ops
- constify i2c_device_id
New driver:
- Realtek RTD1295
- Android emulator (goldfish) RTC
Drivers:
- ds1307: Beginning of a huge cleanup
- s35390a: handle invalid RTC time
- sun6i: external oscillator gate support"
* tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits)
rtc: ds1307: use octal permissions
rtc: ds1307: fix braces
rtc: ds1307: fix alignments and blank lines
rtc: ds1307: use BIT
rtc: ds1307: use u32
rtc: ds1307: use sizeof
rtc: ds1307: remove regs member
rtc: Add Realtek RTD1295
dt-bindings: rtc: Add Realtek RTD1295
rtc: sun6i: Add support for the external oscillator gate
rtc: goldfish: Add RTC driver for Android emulator
dt-bindings: Add device tree binding for Goldfish RTC driver
rtc: ds1307: add basic support for ds1341 chip
rtc: ds1307: remove member nvram_offset from struct ds1307
rtc: ds1307: factor out offset to struct chip_desc
rtc: ds1307: factor out rtc_ops to struct chip_desc
rtc: ds1307: factor out irq_handler to struct chip_desc
rtc: ds1307: improve irq setup
rtc: ds1307: constify struct chip_desc variables
rtc: ds1307: improve trickle charger initialization
...
|
|
Pull SCSI fixes from James Bottomley:
"A tiny update: one patch corrects a Kconfig problem with the shift of
the SAS SMP code to BSG and the other removes a vestige of user space
target mode"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_sas: select BLK_DEV_BSGLIB
scsi: Remove Scsi_Host.uspace_req_q
|
|
Pull block fixes from Jens Axboe:
"Small collection of fixes that would be nice to have in -rc1. This
contains:
- NVMe pull request form Christoph, mostly with fixes for nvme-pci,
host memory buffer in particular.
- Error handling fixup for cgwb_create(), in case allocation of 'wb'
fails. From Christophe Jaillet.
- Ensure that trace_block_getrq() gets the 'dev' in an appropriate
fashion, to avoid a potential NULL deref. From Greg Thelen.
- Regression fix for dm-mq with blk-mq, fixing a problem with
stacking IO schedulers. From me.
- string.h fixup, fixing an issue with memcpy_and_pad(). This
original change came in through an NVMe dependency, which is why
I'm including it here. From Martin Wilck.
- Fix potential int overflow in __blkdev_sectors_to_bio_pages(), from
Mikulas.
- MBR enable fix for sed-opal, from Scott"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: directly insert blk-mq request from blk_insert_cloned_request()
mm/backing-dev.c: fix an error handling path in 'cgwb_create()'
string.h: un-fortify memcpy_and_pad
nvme-pci: implement the HMB entry number and size limitations
nvme-pci: propagate (some) errors from host memory buffer setup
nvme-pci: use appropriate initial chunk size for HMB allocation
nvme-pci: fix host memory buffer allocation fallback
nvme: fix lightnvm check
block: fix integer overflow in __blkdev_sectors_to_bio_pages()
block: sed-opal: Set MBRDone on S3 resume path if TPER is MBREnabled
block: tolerate tracing of NULL bio
|
|
The tool ID information sent in ABS_MISC is expected to be reset to 0
when a tool leaves proximity. Not doing this can cause problems if a
tool is removed and then re-introduced. Kernel event filtering will
prevent the (identical) ABS_MISC event from being sent when the tool
re-enters proxmity. This can cause userspace to not properly set the
tool ID.
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
Cc: stable # v4.10 <[email protected]>
Signed-off-by: Ping Cheng <[email protected]>
Signed-off-by: Jason Gerecke <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
The latest generation of pro devices (MobileStudio Pro, 2nd-gen Intuos
Pro, Cintiq Pro) send a serial number of '0' whenever the pen is too far
away for reliable communication. Userspace defines that a serial number
of '0' is invalid, so we need to be careful not to actually forward
this value. Additionally, since EMR ISDv4 devices do not support serial
numbers or tool IDs, we'd like to not send these events if they aren't
necessary.
The existing code achieves these goals by adding a check for a non-zero
serial number within the wacom_wac_pen_report function. The MSC_SERIAL
and ABS_MISC events are only sent if the serial number is non-zero. This
code fails, however when the pen for a pro device leaves proximity. When
the pen leaves prox and the tablet sends a serial of 0, wacom_wac_pen_event
dutifully clears the serial number. When wacom_wac_pen_report is called,
it does not send either the MSC_SERIAL of the exiting tool nor an ABS_MISC
event.
This patch prevents the wacom_wac_pen_event function from clearing an
already-set serial number. This ensures that we have the serial number
handy when exiting proximity, but requires us to manually clear it
afterwards to ensure the driver does not send stale data (e.g. when
switching between AES pens that report a serial nubmer of 0 for the
first few fully in-proximity packets).
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
Cc: stable # v4.10 <[email protected]>
Signed-off-by: Ping Cheng <[email protected]>
Signed-off-by: Jason Gerecke <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
IPv6 TSO requests with extension hdrs are a problem to the
Lancer and BEx chips. Workaround is to disable TSO6 feature
for such packets.
Also in Lancer chips, MSS less than 256 was resulting in TX stall.
Fix this by disabling GSO when MSS less than 256.
Signed-off-by: Suresh Reddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The buffer allocation is not currently accounting for an extra byte for
the report id. This can cause an out of bounds access in function
i2c_hid_set_or_send_report() with reportID > 15.
Cc: [email protected]
Signed-off-by: Adrian Salido <[email protected]>
Reviewed-by: Benson Leung <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Fix a panic in blk_mq_hctx_has_pending() that is caused by a racy call to
blk_mq_run_hw_queues in a dasd function that might get called with the
request queue not yet initialized during initialization.
Signed-off-by: Stefan Haberland <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
All manipulations of the gem_object list need to be protected by
the list mutex, as GEM objects can be created and freed in parallel.
This fixes a kernel memory corruption.
CC: [email protected]
Signed-off-by: Lucas Stach <[email protected]>
|
|
If the gpu submit fails, bail out to avoid accessing a potentially
unititalized fence.
CC: [email protected] #4.12+
Signed-off-by: Lucas Stach <[email protected]>
|
|
into drm-next
A few fixes for 4.14. Nothing too major.
|
|
A randconfig build caused a compile failure:
drivers/net/ethernet/nuvoton/w90p910_ether.c: In function 'w90p910_ether_close':
drivers/net/ethernet/nuvoton/w90p910_ether.c:580:2: error: implicit declaration of function 'free_irq'; did you mean 'free_uid'? [-Werror=implicit-function-declaration]
Adding the correct include fixes the problem.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 8b426dc54cf4 ("bonding: remove hardcoded value") changed the
default value for tlb_dynamic_lb which lead to either broken ALB mode
(since tlb_dynamic_lb can be changed only in TLB) or setting TLB mode
with tlb_dynamic_lb equal to 0.
The first issue was recently fixed by setting tlb_dynamic_lb to 1 always
when switching to ALB mode, but the default value is still wrong and
we'll enter TLB mode with tlb_dynamic_lb equal to 0 if the mode is
changed via netlink or sysfs. In order to restore the previous behaviour
and default value simply remove the mode check around the default param
initialization for tlb_dynamic_lb which will always set it to 1 as
before.
Fixes: 8b426dc54cf4 ("bonding: remove hardcoded value")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Acked-by: Mahesh Bandewar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When removing the offloading of mirred actions under
matchall classifiers, mlxsw would find the destination port
associated with the offloaded action and utilize it for undoing
the configuration.
Depending on the order by which ports are removed, it's possible that
the destination port would get removed before the source port.
In such a scenario, when actions would be flushed for the source port
mlxsw would perform an illegal dereference as the destination port is
no longer listed.
Since the only item necessary for undoing the configuration on the
destination side is the port-id and that in turn is already maintained
by mlxsw on the source-port, simply stop trying to access the
destination port and use the port-id directly instead.
Fixes: 763b4b70af ("mlxsw: spectrum: Add support in matchall mirror TC offloading")
Signed-off-by: Yuval Mintz <[email protected]>
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Configure pause time to 0xffff when tx flow control enabled
Set pause time to 0xffff in the pause frame to indicate the
partner to stop sending the packets. When RX buffer frees up,
the device sends pause frame with pause time zero for partner to
resume transmission.
Fixes: 2f7ca802bdae ("Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Nisar Sayed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull ceph updates from Ilya Dryomov:
"The highlights include:
- a large series of fixes and improvements to the snapshot-handling
code (Zheng Yan)
- individual read/write OSD requests passed down to libceph are now
limited to 16M in size to avoid hitting OSD-side limits (Zheng Yan)
- encode MStatfs v2 message to allow for more accurate space usage
reporting (Douglas Fuller)
- switch to the new writeback error tracking infrastructure (Jeff
Layton)"
* tag 'ceph-for-4.14-rc1' of git://github.com/ceph/ceph-client: (35 commits)
ceph: stop on-going cached readdir if mds revokes FILE_SHARED cap
ceph: wait on writeback after writing snapshot data
ceph: fix capsnap dirty pages accounting
ceph: ignore wbc->range_{start,end} when write back snapshot data
ceph: fix "range cyclic" mode writepages
ceph: cleanup local variables in ceph_writepages_start()
ceph: optimize pagevec iterating in ceph_writepages_start()
ceph: make writepage_nounlock() invalidate page that beyonds EOF
ceph: properly get capsnap's size in get_oldest_context()
ceph: remove stale check in ceph_invalidatepage()
ceph: queue cap snap only when snap realm's context changes
ceph: handle race between vmtruncate and queuing cap snap
ceph: fix message order check in handle_cap_export()
ceph: fix NULL pointer dereference in ceph_flush_snaps()
ceph: adjust 36 checks for NULL pointers
ceph: delete an unnecessary return statement in update_dentry_lease()
ceph: ENOMEM pr_err in __get_or_create_frag() is redundant
ceph: check negative offsets in ceph_llseek()
ceph: more accurate statfs
ceph: properly set snap follows for cap reconnect
...
|
|
This reverts commit 10e709cb296c98424c03408d23e3addeddcd4088.
The patch doesn't work at all:
1. The CS can still be blocked because of amdgpu_ctx_add_fence().
2. The order of submission isn't correct any more.
3. We could end up using freed up memory because we now drop the
ctx reference to early.
This needs to be fixed cleanly by doing the context handling after the BO
handling, but this is a larger task just avoid the obvious crashes for now.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Monk Liu [email protected]
Signed-off-by: Alex Deucher <[email protected]>
|
|
Pull dma-mapping updates from Christoph Hellwig:
- removal of the old dma_alloc_noncoherent interface
- remove unused flags to dma_declare_coherent_memory
- restrict OF DMA configuration to specific physical busses
- use the iommu mailing list for dma-mapping questions and patches
* tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping:
dma-coherent: fix dma_declare_coherent_memory() logic error
ARM: imx: mx31moboard: Remove unused 'dma' variable
dma-coherent: remove an unused variable
MAINTAINERS: use the iommu list for the dma-mapping subsystem
dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags
dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag
of: restrict DMA configuration
dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent
i825xx: switch to switch to dma_alloc_attrs
au1000_eth: switch to dma_alloc_attrs
sgiseeq: switch to dma_alloc_attrs
dma-mapping: reduce dma_mapping_error inline bloat
|
|
Pull uuid updates from Christoph Hellwig:
"Just a single conversion to the new UUID API for this merge window"
* tag 'uuid-for-4.14' of git://git.infradead.org/users/hch/uuid:
efi: switch to use new generic UUID API
|
|
We should only see devices with interrupt endpoints. Ignore any other
endpoints that we find, so we don't send try to send them interrupt URBs
and trigger a WARN down in the USB stack.
Reported-by: Andrey Konovalov <[email protected]>
Tested-by: Andrey Konovalov <[email protected]>
Cc: <[email protected]> # c01b5e7464f0 Input: xpad - don't depend on endpoint order
Signed-off-by: Cameron Gutman <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The touchpad in the Asus laptop models X505BA/BP and X542BA/BP is
unresponsive after suspend/resume. The following error appears during
resume:
i2c_hid i2c-ELAN1300:00: failed to reset device.
The problem here is that i2c_hid does not notice the interrupt being
generated at this point, because the GPIO is no longer configured
for interrupts.
Fix this by saving pinctrl-amd pin registers during suspend and
restoring them at resume time.
Based on code from pinctrl-intel.
Cc: [email protected]
Signed-off-by: Daniel Drake <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Martin Schwidefsky:
"The second patch set for the 4.14 merge window:
- Convert the dasd device driver to the blk-mq interface.
- Provide three zcrypt interfaces for vfio_ap. These will be required
for KVM guest access to the crypto cards attached via the AP bus.
- A couple of memory management bug fixes."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: blk-mq conversion
s390/mm: use a single lock for the fields in mm_context_t
s390/mm: fix race on mm->context.flush_mm
s390/mm: fix local TLB flushing vs. detach of an mm address space
s390/zcrypt: externalize AP queue interrupt control
s390/zcrypt: externalize AP config info query
s390/zcrypt: externalize test AP queue
s390/mm: use VM_BUG_ON in crst_table_[upgrade|downgrade]
|
|
Since commit dc749a09ea5e ("gpiolib: allow gpio irqchip to map irqs
dynamically"), the irqs for gpio are not statically allocated during in
gpiochip_irqchip_add.
This driver was based on this assumption for initializing the mask
associated to each interrupt this led to a NULL pointer crash in the
kernel:
Unable to handle kernel NULL pointer dereference at virtual address 00000000
Mem abort info:
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000068
CM = 0, WnR = 1
[0000000000000000] user address but active_mm is swapper
Internal error: Oops: 96000044 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-06657-g3b9f8ed25dbe #576
Hardware name: Marvell Armada 3720 Development Board DB-88F3720-DDR3 (DT)
task: ffff80001d908000 task.stack: ffff000008068000
PC is at armada_37xx_pinctrl_probe+0x5f8/0x670
LR is at armada_37xx_pinctrl_probe+0x5e8/0x670
pc : [<ffff000008e25cdc>] lr : [<ffff000008e25ccc>] pstate: 60000045
sp : ffff00000806bb80
x29: ffff00000806bb80 x28: 0000000000000024
x27: 000000000000000c x26: 0000000000000001
x25: ffff80001efee760 x24: 0000000000000000
x23: ffff80001db6f570 x22: ffff80001db6f438
x21: 0000000000000000 x20: ffff80001d9f4810
x19: ffff80001db6f418 x18: 0000000000000000
x17: 0000000000000001 x16: 0000000000000019
x15: ffffffffffffffff x14: 0140000000000000
x13: 0000000000000000 x12: 0000000000000030
x11: 0101010101010101 x10: 0000000000000040
x9 : ffff000009923580 x8 : ffff80001d400248
x7 : ffff80001d400270 x6 : 0000000000000000
x5 : ffff80001d400248 x4 : ffff80001d400270
x3 : 0000000000000000 x2 : 0000000000000001
x1 : 0000000000000001 x0 : 0000000000000000
Process swapper/0 (pid: 1, stack limit = 0xffff000008068000)
Call trace:
Exception stack(0xffff00000806ba40 to 0xffff00000806bb80)
ba40: 0000000000000000 0000000000000001 0000000000000001 0000000000000000
ba60: ffff80001d400270 ffff80001d400248 0000000000000000 ffff80001d400270
ba80: ffff80001d400248 ffff000009923580 0000000000000040 0101010101010101
baa0: 0000000000000030 0000000000000000 0140000000000000 ffffffffffffffff
bac0: 0000000000000019 0000000000000001 0000000000000000 ffff80001db6f418
bae0: ffff80001d9f4810 0000000000000000 ffff80001db6f438 ffff80001db6f570
bb00: 0000000000000000 ffff80001efee760 0000000000000001 000000000000000c
bb20: 0000000000000024 ffff00000806bb80 ffff000008e25ccc ffff00000806bb80
bb40: ffff000008e25cdc 0000000060000045 ffff00000806bb60 ffff0000081189b8
bb60: ffffffffffffffff ffff00000811cf1c ffff00000806bb80 ffff000008e25cdc
[<ffff000008e25cdc>] armada_37xx_pinctrl_probe+0x5f8/0x670
[<ffff00000859d8c8>] platform_drv_probe+0x58/0xb8
[<ffff00000859bb44>] driver_probe_device+0x22c/0x2d8
[<ffff00000859bcac>] __driver_attach+0xbc/0xc0
[<ffff000008599c84>] bus_for_each_dev+0x4c/0x98
[<ffff00000859b440>] driver_attach+0x20/0x28
[<ffff00000859af90>] bus_add_driver+0x1b8/0x228
[<ffff00000859c648>] driver_register+0x60/0xf8
[<ffff00000859df64>] __platform_driver_probe+0x74/0x130
[<ffff000008e256dc>] armada_37xx_pinctrl_driver_init+0x20/0x28
[<ffff000008083980>] do_one_initcall+0x38/0x128
[<ffff000008e00cf4>] kernel_init_freeable+0x188/0x22c
[<ffff0000089b56e8>] kernel_init+0x10/0x100
[<ffff000008084bb0>] ret_from_fork+0x10/0x18
Code: f9403fa2 12001341 1100075a 9ac12041 (b9000001)
---[ end trace 8b0f4e05e1603208 ]---
This patch moves the initialization of the mask field in the irq_startup
function. However some callbacks such as irq_set_type and irq_set_wake
could be called before irq_startup. For those functions the mask is
computed at each call which is not a issue as these functions are not
located in a hot path but are used sporadically for configuration.
Fixes: dc749a09ea5e ("gpiolib: allow gpio irqchip to map irqs
dynamically")
Cc: <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
info->groups[] has info->ngroups elements so these comparisons should be
>= instead of >.
Fixes: 41d32cfce1ae ("pinctrl: sprd: Add Spreadtrum pin control driver")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
devm_pinctrl_get() could fail with ERR_PTR(-ENOMEM) so I have added a
check for that. I also reversed the other IS_ERR() test because it was
a little confusing to test one way and then the opposite a couple lines
later.
Fixes: 41d32cfce1ae ("pinctrl: sprd: Add Spreadtrum pin control driver")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
The Spreadtrum pinctrl drivers are only useful when building for a
Spreadtrum platform.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
Fix build errors when CONFIG_OF is not enabled.
Also, the pinctrl-sprd-sc9860 driver uses functions from the pinctrl-sprd
driver, so the former should depend on the latter driver.
../drivers/pinctrl/sprd/pinctrl-sprd.c: In function 'sprd_dt_node_to_map':
../drivers/pinctrl/sprd/pinctrl-sprd.c:290:2: error: implicit declaration of function 'pinconf_generic_parse_dt_config' [-Werror=implicit-function-declaration]
ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
^
../drivers/pinctrl/sprd/pinctrl-sprd.c: At top level:
../drivers/pinctrl/sprd/pinctrl-sprd.c:844:44: error: array type has incomplete element type
static const struct pinconf_generic_params sprd_dt_params[] = {
^
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Baolin Wang <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: [email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
The functions sprd_pmx_get_function_count, sprd_pmx_get_function_name
and sprd_pmx_get_function_groups are local to the source and do not
need to be in global scope, so make them static.
Cleans up sparse warnings:
"symbol 'sprd_pmx_get_function_count' was not declared. Should it be
static?"
"symbol 'sprd_pmx_get_function_name' was not declared. Should it be
static?"
"symbol 'sprd_pmx_get_function_groups' was not declared. Should it be
static?"
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
The #includes <linux/bug.h> is here to use BUILD_BUG_ON_ZERO().
Thanks to commit bc6245e5efd7 ("bug: split BUILD_BUG stuff out into
<linux/build_bug.h>"), it is now possible to reduce the number of
headers pulled in.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
The atomic conversion of the qxl driver didn't got the primary surface
handling completely right. It works in the common simple cases, but
fails for example when changing the display resolution using xrandr or
in multihead setups.
The rules are simple: There is one primary surface. Before defining a
new one you have to destroy the old one.
This patch makes qxl_primary_atomic_update() destroy the primary surface
before defining a new one. It fixes is_primary flag updates. It adds
is_primary checks so we don't try to update the primary surface in case
it already has the state we want it being in.
Fixes: 3538e80a869b ("drm: qxl: Atomic phase 1: Implement mode_set_nofb")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102338
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196777
Signed-off-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Gabriel Krisman Bertazi <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal updates from Zhang Rui:
- fix resources release in error paths when registering thermal zone.
(Christophe Jaillet)
- introduce a new thermal driver for on-chip PVT (Process, Voltage and
Temperature) monitoring unit implemented on UniPhier SoCs. This
driver supports temperature monitoring and alert function. (Kunihiko
Hayashi)
- Add support for mt2712 chip in the mtk_thermal driver. (Louis Yu)
- Add support for RK3328 SOC in rockchip_thermal driver. (Rocky Hao)
- cleanup a couple of platform thermal drivers to constify
thermal_zone_of_device_ops structures. (Julia Lawall)
- a couple of fixes in int340x and intel_pch_thermal thermal driver.
(Arvind Yadav, Sumeet Pawnikar, Brian Bian, Ed Swierk, Zhang Rui)
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (27 commits)
Thermal: int3406_thermal: fix thermal sysfs I/F
thermal: mediatek: minor mtk_thermal.c cleanups
thermal: mediatek: extend calibration data for mt2712 chip
thermal: mediatek: add Mediatek thermal driver for mt2712
dt-bindings: thermal: Add binding document for Mediatek thermal controller
thermal: intel_pch_thermal: Fix enable check on Broadwell-DE
thermal: rockchip: Support the RK3328 SOC in thermal driver
dt-bindings: rockchip-thermal: Support the RK3328 SoC compatible
thermal: bcm2835: constify thermal_zone_of_device_ops structures
thermal: exynos: constify thermal_zone_of_device_ops structures
thermal: zx2967: constify thermal_zone_of_device_ops structures
thermal: rcar_gen3_thermal: constify thermal_zone_of_device_ops structures
thermal: qoriq: constify thermal_zone_of_device_ops structures
thermal: hisilicon: constify thermal_zone_of_device_ops structures
thermal: core: Fix resources release in error paths in thermal_zone_device_register()
thermal: core: Use the new 'thermal_zone_destroy_device_groups()' helper function
thermal: core: Add some new helper functions to free resources
thermal: int3400_thermal: process "thermal table changed" event
thermal: uniphier: add UniPhier thermal driver
dt-bindings: thermal: add binding documentation for UniPhier thermal monitor
...
|
|
by sysfs
Commit cbf5ecb30560 ("net: bonding: Fix transmit load balancing in
balance-alb mode") tried to fix transmit dynamic load balancing in
balance-alb mode, which wasn't working after commit 8b426dc54cf4
("bonding: remove hardcoded value").
It turned out that my previous patch only fixed the case when
balance-alb was specified as bonding module parameter, and not when
balance-alb mode was set using /sys/class/net/*/bonding/mode (the most
common usage). In the latter case, tlb_dynamic_lb was set up according
to the default mode of the bonding interface, which happens to be
balance-rr.
This additional patch addresses this issue by setting up tlb_dynamic_lb
to 1 if "mode" is set to balance-alb through the sysfs interface.
I didn't add code to change tlb_balance_lb back to the default value for
other modes, because "mode" is usually set up only once during
initialization, and it's not worthwhile to change the static variable
bonding_defaults in bond_main.c to a global variable just for this
purpose.
Commit 8b426dc54cf4 also changes the value of tlb_dynamic_lb for
balance-tlb mode if it is set up using the sysfs interface. I didn't
change that behavior, because the value of tlb_balance_lb can be changed
using the sysfs interface for balance-tlb, and I didn't like changing
the default value back and forth for balance-tlb.
As for balance-alb, /sys/class/net/*/bonding/tlb_balance_lb cannot be
written to. However, I think balance-alb with tlb_dynamic_lb set to 0
is not an intended usage, so there is little use making it writable at
this moment.
Fixes: 8b426dc54cf4 ("bonding: remove hardcoded value")
Reported-by: Reinis Rozitis <[email protected]>
Signed-off-by: Kosuke Tatsukawa <[email protected]>
Cc: [email protected] # v4.12+
Acked-by: Nikolay Aleksandrov <[email protected]>
Acked-by: Mahesh Bandewar <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Instead of stopping the touchscreen we were starting it in suspend, and
disabling it in resume.
Fixes: c899afedf168 ("Input: ucb1400_ts - convert to threaded IRQ")
Reported-by: Anton Volkov <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
|