aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-04-21drivers/perf: arm-pmu: fix RCU usage on pmu resume from low-powerLorenzo Pieralisi1-2/+13
Commit da4e4f18afe0 ("drivers/perf: arm_pmu: implement CPU_PM notifier") added code in the arm perf infrastructure that allows the kernel to save/restore perf counters whenever the CPU enters a low-power state. The kernel saves/restores the counters for each active event through the armpmu_{stop/start} ARM pmu API, so that the low-power state enter/exit cycle is emulated through pmu start/stop operations for each event in use. However, calling armpmu_start() for each active event on power up executes code that requires RCU locking (perf_event_update_userpage()) to be functional, so, given that the core may call the CPU_PM notifiers while running the idle thread in an quiescent RCU state this is not allowed as detected through the following splat when kernel is run with CONFIG_PROVE_LOCKING enabled: [ 49.293286] [ 49.294761] =============================== [ 49.298895] [ INFO: suspicious RCU usage. ] [ 49.303031] 4.6.0-rc3+ #421 Not tainted [ 49.306821] ------------------------------- [ 49.310956] include/linux/rcupdate.h:872 rcu_read_lock() used illegally while idle! [ 49.318530] [ 49.318530] other info that might help us debug this: [ 49.318530] [ 49.326451] [ 49.326451] RCU used illegally from idle CPU! [ 49.326451] rcu_scheduler_active = 1, debug_locks = 0 [ 49.337209] RCU used illegally from extended quiescent state! [ 49.342892] 2 locks held by swapper/2/0: [ 49.346768] #0: (cpu_pm_notifier_lock){......}, at: [<ffffff8008163c28>] cpu_pm_exit+0x18/0x80 [ 49.355492] #1: (rcu_read_lock){......}, at: [<ffffff800816dc38>] perf_event_update_userpage+0x0/0x260 This patch wraps the armpmu_start() call (that indirectly calls perf_event_update_userpage()) on CPU_PM notifier power state exit (or failed entry) within the RCU_NONIDLE() macro so that the RCU subsystem is made aware the calling cpu is not idle from an RCU perspective for the armpmu_start() call duration, therefore fixing the issue. Fixes: da4e4f18afe0 ("drivers/perf: arm_pmu: implement CPU_PM notifier") Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by: James Morse <james.morse@arm.com> Suggested-by: Kevin Hilman <khilman@baylibre.com> Cc: Ashwin Chaugule <ashwin.chaugule@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-04-20thermal: fix Mediatek thermal controller buildJohannes Berg1-0/+1
At least with CONFIG_COMPILE_TEST, there's no reason to assume that CONFIG_RESET_CONTROLLER is set, but the code for this controller requires it since it calls device_reset(). Make CONFIG_MTK_THERMAL properly depend on CONFIG_RESET_CONTROLLER. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: consistently use int for trip tempWei Ni1-4/+4
The commit 17e8351a7739 consistently use int for temperature, however it missed a few in trip temperature and thermal_core. In current codes, the trip->temperature used "unsigned long" and zone->temperature used"int", if the temperature is negative value, it will get wrong result when compare temperature with trip temperature. This patch can fix it. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: fix mtk_thermal build dependencyRandy Dunlap1-0/+1
Fix build errors when MTK_THERMAL=y and NVMEM=m by preventing that Kconfig combination. drivers/built-in.o: In function `mtk_thermal_probe': mtk_thermal.c:(.text+0xffa8f): undefined reference to `nvmem_cell_get' mtk_thermal.c:(.text+0xffabe): undefined reference to `nvmem_cell_read' mtk_thermal.c:(.text+0xffac9): undefined reference to `nvmem_cell_put' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: <linux-pm@vger.kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Hanyi Wu <hanyi.wu@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: minor mtk_thermal.c cleanupsRandy Dunlap1-2/+1
Trivial cleanups: - delete one duplicate #include - end email address with closing '>' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Hanyi Wu <hanyi.wu@mediatek.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: power_allocator: req_range multiplication should be a 64 bit typeJavi Merino1-1/+1
req_range is declared as a u64 to cope with overflows in the multiplication of two u32. As both req_power and power_range are u32, we need to make sure the multiplication is done with u64 types. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20thermal: of: add __init attributeJulia Lawall1-2/+2
Add __init attribute on a function that is only called from other __init functions and that is not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the function is put in the .text.unlikely segment. Declaring it as __init will cause it to be put in the .init.text and to disappear after initialization. The result of objdump -x on the function before the change is as follows: 0000000000000086 l F .text.unlikely 0000000000000739 thermal_of_build_thermal_zone And after the change it is as follows: 0000000000000000 l F .init.text 0000000000000734 thermal_of_build_thermal_zone Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-04-20Input: twl4030-vibra - do not reparent to grandparentDmitry Torokhov1-1/+0
For devm-managed input devices we should not modify input device's parent, otherwise automatic release of resources will not work properly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-20Input: twl6040-vibra - do not reparent to grandparentDmitry Torokhov1-1/+0
For devm-managed input devices we should not modify input device's parent, otherwise automatic release of resources will not work properly. Tested-by: "H. Nikolaus Schaller" <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-20Merge branch 'linus' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Incorrect output buffer size calculation in rsa-pkcs1pad - Uninitialised padding bytes on exported state in ccp driver - Potentially freed pointer used on completion callback in sha1-mb" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ccp - Prevent information leakage on export crypto: sha1-mb - use corrcet pointer while completing jobs crypto: rsa-pkcs1pad - fix dst len
2016-04-20Revert "Prevent NUll pointer dereference with two PHYs on cpsw"Andrew Goodbody1-16/+15
This reverts commit cfe255600154f0072d4a8695590dbd194dfd1aeb This can result in a "Unable to handle kernel paging request" during boot. This was due to using an uninitialised struct member, data->slaves. Signed-off-by: Andrew Goodbody <andrew.goodbody@cambrionix.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-20usb: gadget: f_fs: Fix use-after-freeLars-Peter Clausen1-3/+2
When using asynchronous read or write operations on the USB endpoints the issuer of the IO request is notified by calling the ki_complete() callback of the submitted kiocb when the URB has been completed. Calling this ki_complete() callback will free kiocb. Make sure that the structure is no longer accessed beyond that point, otherwise undefined behaviour might occur. Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-19net/mlx4_en: do batched put_page using atomic_subKonstantin Khlebnikov1-2/+6
This patch fixes couple error paths after allocation failures. Atomic set of page reference counter is safe only if it is zero, otherwise set can race with any speculative get_page_unless_zero. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-19net/mlx4_en: allocate non 0-order pages for RX ring with __GFP_NOMEMALLOCKonstantin Khlebnikov1-1/+1
High order pages are optional here since commit 51151a16a60f ("mlx4: allow order-0 memory allocations in RX path"), so here is no reason for depleting reserves. Generic __netdev_alloc_frag() implements the same logic. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-19Merge branch 'ptmx-cleanup'Linus Torvalds1-33/+30
Merge the ptmx internal interface cleanup branch. This doesn't change semantics, but it should be a sane basis for eventually getting the multi-instance devpts code into some sane shape where we can get rid of the kernel config option. Which we can hopefully get done next merge window.. * ptmx-cleanup: devpts: clean up interface to pty drivers
2016-04-19platform:x86 decouple telemetry driver from the optional IPC resourcesAubrey Li2-42/+54
Currently the optional IPC resources prevent telemetry driver from probing if these resources are not in ACPI table. This patch decouples telemetry driver from these optional resources, so that telemetry driver has dependency only on the necessary ACPI resources. Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-04-19Input: twl6040-vibra - ignore return value of schedule_workH. Nikolaus Schaller1-5/+1
Returning ret is wrong. And checking for an error as well. User space may call multiple times until the work is really scheduled. twl4030-vibra.c also ignores the return value. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-19Input: twl6040-vibra - fix NULL pointer dereference by removing workqueueH. Nikolaus Schaller1-2/+1
commit 21fb9f0d5e91 ("Input: twl6040-vibra - use system workqueue") says that it switches to use the system workqueue but it did neither - remove the workqueue struct variable - replace code to really use the system workqueue Instead it calls queue_work() on uninitialized info->workqueue. The result is a NULL pointer dereference in vibra_play(). Solution: use schedule_work Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-19Revert "serial: 8250: Add hardware dependency to RT288X option"Greg Kroah-Hartman1-1/+0
This reverts commit 8d2acdb9fc3a544ab0442634531834d6007b5467. It's causing problems, and somehow I missed that Peter didn't like it at all :( So revert it for now until it gets sorted out. Reported-by: Mason <slash.tmp@free.fr> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Jean Delvare <jdelvare@suse.de> Cc: Mans Rullgard <mans@mansr.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: John Crispin <blogic@openwrt.org> Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
2016-04-19tty/serial/8250: fix RS485 half-duplex RXYegor Yefremov1-1/+10
When in half-duplex mode RX will be disabled before TX, but not enabled after deactivating transmitter. This patch enables UART_IER_RLSI and UART_IER_RDI interrupts after TX is over. Cc: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Fixes: e490c9144cfa ("tty: Add software emulated RS485 support for 8250") Acked-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-19Revert "serial-uartlite: Constify uartlite_be/uartlite_le"Sudip Mukherjee1-4/+4
This reverts commit 2905697a82eaf20606ced164d853b52d1b94aaa8. The commit introduced two build warnings: drivers/tty/serial/uartlite.c: In function ‘ulite_request_port’: drivers/tty/serial/uartlite.c:348:21: warning: assignment discards ‘const’ qualifier from pointer target type port->private_data = &uartlite_be; ^ drivers/tty/serial/uartlite.c:354:22: warning: assignment discards ‘const’ qualifier from pointer target type port->private_data = &uartlite_le; ^ Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Cc: Maarten Brock <m.brock@vanmierlo.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-18Merge tag 'pci-v4.6-fixes-2' of ↵Linus Torvalds4-6/+67
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "These are fixes for two issues: - The VPD parsing code we added for v4.6 keeps some devices from crashing, but also keeps cxgb4 from reading non-standard extra VPD data that is relies on. Hariprasad added a way for the driver to specify how much VPD is valid. - The i.MX6 active-low reset GPIO support we added in v4.5 caused regressions on some boards, so we're reverting that. VPD: Add pci_set_vpd_size() (Hariprasad Shenai) cxgb4: Set VPD size so we can read both VPD structures (Hariprasad Shenai) Freescale i.MX6 host bridge driver: Revert "PCI: imx6: Add support for active-low reset GPIO" (Fabio Estevam)" * tag 'pci-v4.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: cxgb4: Set VPD size so we can read both VPD structures PCI: Add pci_set_vpd_size() to set VPD size Revert "PCI: imx6: Add support for active-low reset GPIO"
2016-04-18cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended setRafael J. Wysocki1-0/+3
Since governor operations are generally skipped if cpufreq_suspended is set, cpufreq_start_governor() should do nothing in that case. That function is called in the cpufreq_online() path, and may also be called from cpufreq_offline() in some cases, which are invoked by the nonboot CPUs disabing/enabling code during system suspend to RAM and resume. That happens when all devices have been suspended, so if the cpufreq driver relies on things like I2C to get the current frequency, it may not be ready to do that then. To prevent problems from happening for this reason, make cpufreq_update_current_freq(), which is the only function invoked by cpufreq_start_governor() that doesn't check cpufreq_suspended already, return 0 upfront if cpufreq_suspended is set. Fixes: 3bbf8fe3ae08 (cpufreq: Always update current frequency before startig governor) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-04-18devpts: clean up interface to pty driversLinus Torvalds1-33/+30
This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-18Merge branch 'for-linus' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "A couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: add CPU_BIG_ENDIAN config option s390/spinlock: avoid yield to non existent cpu s390/dcssblk: fix possible deadlock in remove vs. per-device attributes s390/seccomp: include generic seccomp header file s390/pci: add extra padding to function measurement block s390/scm_blk: fix deadlock for requests != REQ_TYPE_FS
2016-04-18drm/radeon: print a message if ATPX dGPU power control is missingAlex Deucher1-1/+4
It will help identify problematic boards. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-18Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control"Alex Deucher2-11/+5
This reverts commit e64c952efb8e0c15ae82cec8e455ab4910690ef1. ATPX is the ACPI method for controlling AMD PowerXpress laptops. There are flags to indicate which methods are supported. If the dGPU power down flag is not supported, the driver needs to implement the dGPU power down manually. We had previously always forced the driver to assume the ATPX dGPU power down was present, but this causes problems on boards where it is not, leading to GPU hangs when attempting to power down the dGPU. Manual dGPU power down is not currently supported in the Linux driver. Some laptops indicate that the ATPX dGPU power down method is not present, but it actually apparently is. I'm not sure if this is a bios bug and it should be set or if there is a reason it was unset and the method should not be used. This is not an issue on other OSes since both the ATPX and the manual driver power down methods are supported. This is apparently fairly widespread, so just revert for now. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=115321 https://bugzilla.kernel.org/show_bug.cgi?id=116581 https://bugzilla.kernel.org/show_bug.cgi?id=116251 Cc: stable@vger.kernel.org
2016-04-18drm/amdgpu/acp: fix resume on CZ systems with AZ audioAlex Deucher1-0/+4
Nothing to do on resume on systems with AZ audio. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-18drm/radeon: add a quirk for a XFX R9 270XAlex Deucher1-0/+1
bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-04-18drm/radeon: print pci revision as well as pci ids on driver loadAlex Deucher1-3/+3
The pci revision id is useful in debugging certain things as it's part of how SKUs are defined on newer asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-18drm/i915: Use fw_domains_put_with_fifo() on HSWVille Syrjälä1-1/+5
HSW still has the wake FIFO, so let's check it. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Deepak S <deepak.s@linux.intel.com> Fixes: 05a2fb157e44 ("drm/i915: Consolidate forcewake code") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460633942-24013-1-git-send-email-ville.syrjala@linux.intel.com Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> (cherry picked from commit 3d7d0c85e41afb5a05e98b3a8a72c38357f02594) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-18drm/i915: Force ringbuffers to not be at offset 0Chris Wilson1-2/+5
For reasons unknown Sandybridge GT1 (at least) will eventually hang when it encounters a ring wraparound at offset 0. The test case that reproduces the bug reliably forces a large number of interrupted context switches, thereby causing very frequent ring wraparounds, but there are similar bug reports in the wild with the same symptoms, seqno writes stop just before the wrap and the ringbuffer at address 0. It is also timing crucial, but adding various delays hasn't helped pinpoint where the window lies. Whether the fault is restricted to the ringbuffer itself or the GTT addressing is unclear, but moving the ringbuffer fixes all the hangs I have been able to reproduce. References: (e.g.) https://bugs.freedesktop.org/show_bug.cgi?id=93262 Testcase: igt/gem_exec_whisper/render-contexts-interruptible #snb-gt1 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-12-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit a687a43a48f0f91ba37dce5a14b467258ed6f035) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-18drm/i915: Adjust size of PIPE_CONTROL used for gen8 render seqno writeMichał Winiarski1-2/+8
We started to use PIPE_CONTROL to write render ring seqno in order to combat seqno write vs interrupt generation problems. This was introduced by commit 7c17d377374d ("drm/i915: Use ordered seqno write interrupt generation on gen8+ execlists"). On gen8+ size of PIPE_CONTROL with Post Sync Operation should be 6 dwords. When we're using older 5-dword variant it's possible to observe inconsistent values written by PIPE_CONTROL with Post Sync Operation from user batches, resulting in rendering corruptions. v2: Fix BAT failures v3: Comments on alignment and thrashing high dword of seqno (Chris) v4: Updated commit msg (Mika) Testcase: igt/gem_pipe_control_store_loop/*-qword-write Issue: VIZ-7393 Cc: stable@vger.kernel.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460469115-26002-1-git-send-email-michal.winiarski@intel.com (cherry picked from commit ce81a65c79d6012a384563caf76d47e28947a347) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-18drm/i915/skl: Fix spurious gpu hang with gt3/gt4 revsMika Kuoppala1-2/+3
Experiments with heaven 4.0 benchmark and skylake gt3e (rev 0xa) suggest that WaForceContextSaveRestoreNonCoherent is needed for all revs. Extending this to all revs cures a gpu hang with rev 0xa when running heaven4.0 gpu benchmark. We have been here before, with problems enabling gt4e and extending up to revision F0 instead of false claims of bspec of E0 only. See commit <e238659ddd88> ("drm/i915/skl: Default to noncoherent access up to F0"). In retrospect we should have covered this with this big blanket back then already, as E0 vs F0 discrepancy was suspicious enough. Previously the WaForceEnableNonCoherent has been tied to context non-coherence, atleast in relevant hsds. So keep this tie and extended this alongside. Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: stable@vger.kernel.org Reported-by: Mike Lothian <mike@fireburn.co.uk> References: https://bugs.freedesktop.org/show_bug.cgi?id=93491 Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459860977-27751-2-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 97ea6be161c55dec896b65c95157d953c330ae05) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-18drm/i915/skl: Fix rc6 based gpu/system hangMika Kuoppala1-2/+3
For all gt3 and gt4 skylake variants, extend the usage of WaRsDisableCoarsePowerGating for all revisions. Without this gt3 and gt4 skylakes up to atleast rev 0xa can gpu hang or system hang. Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Cc: <stable@vger.kernel.org> Reported-by: Mikael Djurfeldt <mikael@djurfeldt.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=94161 Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> Tested-by: Timo Aaltonen <tjaalton@ubuntu.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459860977-27751-1-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 185c66e57ce725afeb58a3cfa48547706af3a7af) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-18drm/i915/userptr: Hold mmref whilst calling get-user-pagesChris Wilson1-12/+17
Holding a reference to the containing task_struct is not sufficient to prevent the mm_struct from being reaped under memory pressure. If this happens whilst we are calling get_user_pages(), explosions erupt - sometimes an immediate GPF, sometimes page flag corruption. To prevent the target mm from being reaped as we are reading from it, acquire a reference before we begin. Testcase: igt/gem_shrink/*userptr Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: stable@vger.kernel.org Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459864801-28606-2-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit 40313f0cd0b711a7a5905e5182422799e157d8aa) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-18drm/i915: Fixup the free space logic in ring_prepareAkash Goel2-6/+6
Currently for the case where there is enough space at the end of Ring buffer for accommodating only the base request, the wrapround is done immediately and as a result the base request gets added at the start of Ring buffer. But there may not be enough free space at the beginning to accommodate the base request, as before the wraparound, the wait was effectively done for the reserved_size free space from the start of Ring buffer. In such a case there is a potential of Ring buffer overflow, the instructions at the head of Ring (ACTHD) can get overwritten. Since the base request can fit in the remaining space, there is no need to wraparound immediately. The wraparound will anyway happen later when the reserved part starts getting used. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1457688402-10411-1-git-send-email-akash.goel@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org (cherry picked from commit 782f6bc0aba037436d6a04d19b23f8b61020a576) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-18drm/i915/skl+: Use plane size for relative data rate calculationKumar, Mahesh1-14/+28
Use plane size for relative data rate calculation. don't always use pipe source width & height. adjust height & width according to rotation. use plane size for watermark calculations also. v2: Address Matt's comments. Use intel_plane_state->visible to avoid divide-by-zero error. Where FB was present but not visible so causing total data rate to be zero, hence divide-by-zero. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93917 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94044 Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Kumar, Mahesh <mahesh1.kumar@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459956399-1296-1-git-send-email-matthew.d.roper@intel.com (cherry picked from commit a280f7dd9f1a85eed242d0f62498bfc11520a1a3) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-04-18usb: dwc3: gadget: Fix suspend/resume during device modeRoger Quadros1-0/+6
Gadget controller might not be always active during system suspend/resume as gadget driver might not have yet been loaded or might have been unloaded prior to system suspend. Check if we're active and only then perform necessary actions during suspend/resume. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: dwc3: fix memory leak of dwc->regsetDu, Changbin1-5/+8
dwc->regset is allocated on dwc3_debugfs_init, and should be released on init failure or dwc3_debugfs_exit. Btw, The line "dwc->root = NULL" is unnecessary, so remove it. Signed-off-by: Du, Changbin <changbin.du@intel.com> [ felipe.balbi@linux.intel.com : add another err label for the new error condition ] Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: dwc3: core: fix PHY handling during suspendFelipe Balbi1-1/+22
we need to power off the PHY during suspend and power it back on during resume. Signed-off-by: Felipe Balbi <balbi@kernel.org> [nsekhar@ti.com: fix call to usb_phy_set_suspend() in dwc3_suspend()] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: dwc3: omap: fix up error path on probe()Felipe Balbi1-8/+4
Even if pm_runtime_get*() fails, we *MUST* call pm_runtime_put_sync() before disabling PM. While at it, remove superfluous dwc3_omap_disable_irqs() in error path. Signed-off-by: Felipe Balbi <balbi@kernel.org> [nsekhar@ti.com: patch description updates] Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18usb: gadget: composite: Clear reserved fields of SSP Dev CapJohn Youn1-0/+2
Set the reserved fields of the SuperSpeed Plus Device Capability descriptor to 0. Otherwise there might be stale data there which will cause USB CV to fail. Fixes: f228a8de242a ("usb: gadget: composite: Return SSP Dev Cap descriptor") Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-18omapfb: panel-sharp-ls037v7dw01: fix check of gpio_to_desc() return valueVladimir Zapolskiy1-8/+4
The change fixes a check of gpio_to_desc() return value, the function returns either a valid pointer to struct gpio_desc or NULL, this makes IS_ERR() check invalid and may lead to a NULL pointer dereference in runtime. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-04-18video: ARM CLCD: runtime check for VersatileLinus Walleij1-7/+8
The current compile-time check for inversed IENB/CNTL does not work in multiplatform boots: as soon as versatile is included in the build, the IENB/CNTL is switched and breaks graphics. Convert this to a runtime switch. Cc: stable@vger.kernel.org Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Fixes: a29da136de34 ("ARM: versatile: convert to multi-platform") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-04-17macsec: fix crypto Kconfig dependencyArnd Bergmann1-0/+1
The new MACsec driver uses the AES crypto algorithm, but can be configured even if CONFIG_CRYPTO is disabled, leading to a build error: warning: (MAC80211 && MACSEC) selects CRYPTO_GCM which has unmet direct dependencies (CRYPTO) warning: (BT && CEPH_LIB && INET && MAC802154 && MAC80211 && BLK_DEV_RBD && MACSEC && AIRO_CS && LIBIPW && HOSTAP && USB_WUSB && RTLLIB_CRYPTO_CCMP && FS_ENCRYPTION && EXT4_ENCRYPTION && CEPH_FS && BIG_KEYS && ENCRYPTED_KEYS) selects CRYPTO_AES which has unmet direct dependencies (CRYPTO) crypto/built-in.o: In function `gcm_enc_copy_hash': aes_generic.c:(.text+0x2b8): undefined reference to `crypto_xor' aes_generic.c:(.text+0x2dc): undefined reference to `scatterwalk_map_and_copy' This adds an explicit 'select CRYPTO' statement the way that other drivers handle it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-17Merge tag 'dm-4.6-fix-2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix for earlier 4.6-rc4 stable@ commit that introduced improper use of write lock in cmd_read_lock() -- due to cut-n-paste gone awry (and sparse didn't catch it)" * tag 'dm-4.6-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache metadata: fix cmd_read_lock() acquiring write lock
2016-04-17dm cache metadata: fix cmd_read_lock() acquiring write lockAhmed Samy1-2/+2
Commit 9567366fefdd ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in cmd_read_lock(), yet up_read() is used to release the lock in READ_UNLOCK(). Fix it. Fixes: 9567366fefdd ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros") Cc: stable@vger.kernel.org Signed-off-by: Ahmed Samy <f.fallen45@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-04-17Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delayStephen Boyd1-3/+4
The trigger delay algorithm that converts from microseconds to the register value looks incorrect. According to most of the PMIC documentation, the equation is delay (Seconds) = (1 / 1024) * 2 ^ (x + 4) except for one case where the documentation looks to have a formatting issue and the equation looks like delay (Seconds) = (1 / 1024) * 2 x + 4 Most likely this driver was written with the improper documentation to begin with. According to the downstream sources the valid delays are from 2 seconds to 1/64 second, and the latter equation just doesn't make sense for that. Let's fix the algorithm and the range check to match the documentation and the downstream sources. Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: 92d57a73e410 ("input: Add support for Qualcomm PMIC8XXX power key") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: John Stultz <john.stultz@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-04-17Input: arizona-haptic - don't assign input_dev parentCharles Keepax1-1/+0
We shouldn't assign the parent device of the input_dev to be the parent MFD device, because this will be used for devres which causes input_unregister_device to run after the haptics device has been removed, since it is itself a child of the MFD device. The default of using the haptics device itself as the parent is correct. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Powered by cgit, Gruvboxed by Blaster4385.