| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull NVMe fixes from Christoph:
"Various relatively small fixes, mostly to fix error handling of various
sorts."
* 'nvme-4.18' of git://git.infradead.org/nvme:
nvme-pci: limit max IO size and segments to avoid high order allocations
nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl
nvme-fc: release io queues to allow fast fail
nvmet: reset keep alive timer in controller enable
nvme-rdma: don't override opts->queue_size
nvme-rdma: Fix command completion race at error recovery
nvme-rdma: fix possible free of a non-allocated async event buffer
nvme-rdma: fix possible double free condition when failing to create a controller
|
|
Enabling LPIs was made a lot stricter recently, by checking that they are
disabled before enabling them. By doing so, the CPU hotplug case was missed
altogether, which leaves LPIs enabled on hotplug off (expecting the CPU to
eventually come back), and won't write a different value anyway on hotplug
on.
So skip that check if that particular case is detected
Fixes: 6eb486b66a30 ("irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling")
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lkml.kernel.org/r/20180622095254.5906-8-marc.zyngier@arm.com
|
|
Similarily to the SYNC operation, it must be verified that the VPE
targetted by a VLPI is backed by a valid collection in the GIC driver data
structures.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-7-marc.zyngier@arm.com
|
|
It is possible, under obscure circumstances, to convince the ITS driver to
emit a SYNC operation that targets a collection that is not bound to any
redistributor (and the target_address field is zero) because the
corresponding CPU has not been seen yet (the system has been booted with
max_cpus="something small").
If the ITS is using the linear CPU number as the target, this is not a big
deal, as we just end-up issuing a SYNC to CPU0. But if the ITS requires the
physical address of the redistributor (with GITS_TYPER.PTA==1), we end-up
asking the ITS to write to the physical address zero, which is not exactly
a good idea (there has been report of the ITS locking up). This should of
course never happen, but hey, this is SW...
In order to avoid the above disaster, let's track which collections have
been actually initialized, and let's not generate a SYNC if the collection
hasn't been properly bound to a redistributor. Take this opportunity to
spit our a warning, in the hope that someone may report the issue if it
arrises again.
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-6-marc.zyngier@arm.com
|
|
On a NUMA system, if an ITS is local to an offline node, the ITS driver may
pick an offline CPU to bind the LPI. In this case, pick an online CPU (and
the first one will do).
But on some systems, binding an LPI to non-local node CPU may cause
deadlock (see Cavium erratum 23144). In this case, just fail the activate
and return an error code.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180622095254.5906-5-marc.zyngier@arm.com
|
|
On failing to allocate the required SPIs, the actual number of interrupts
should be freed and not its log2 value.
Fixes: de337ee30142 ("irqchip/gic-v2m: Add PCI Multi-MSI support")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-4-marc.zyngier@arm.com
|
|
The ls-scfs-msi driver is not dealing with the effective affinity
as it should. Let's fix that, and make it clear that the effective
affinity is restricted to a single CPU. Also prevent the driver from
messing with the internals of the affinity setting infrastructure.
Reported-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20180622095254.5906-3-marc.zyngier@arm.com
|
|
Commit:
79832f0b5f71 ("efi/libstub/tpm: Initialize pointer variables to zero for mixed mode")
fixes a problem with the tpm code on mixed mode (64-bit kernel on 32-bit UEFI),
where 64-bit pointer variables are not fully initialized by the 32-bit EFI code.
A similar problem applies to the efi_physical_addr_t variables which
are written by the ->get_event_log() EFI call. Even though efi_physical_addr_t
is 64-bit everywhere, it seems that some 32-bit UEFI implementations only
fill in the lower 32 bits when passed a pointer to an efi_physical_addr_t
to fill.
This commit initializes these to 0 to, to ensure the upper 32 bits are
0 in mixed mode. This fixes recent kernels sometimes hanging during
early boot on mixed mode UEFI systems.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.16+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20180622064222.11633-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With gcc 4.1.2 when compiling for 32-bit:
drivers/mtd/devices/mtd_dataflash.c:736: warning: integer constant is too large for ‘long’ type
drivers/mtd/devices/mtd_dataflash.c:737: warning: integer constant is too large for ‘long’ type
Add the missing "ULL" suffixes to fix this.
Fixes: 67e4145ebf2c161d ("mtd: dataflash: Add flash_info for AT45DB641E")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
cfi_ppb_unlock() walks all flash chips when unlocking sectors,
avoid walking chips unaffected by the unlock operation.
Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Commit 910f8befdf5b ("xen/pirq: fix error path cleanup when binding
MSIs") fixed a couple of errors in error cleanup path of
xen_bind_pirq_msi_to_irq(). This cleanup allowed a call to
__unbind_from_irq() with an unbound irq, which would result in
triggering the BUG_ON there.
Since there is really no reason for the BUG_ON (xen_free_irq() can
operate on unbound irqs) we can remove it.
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
For passing arbitrary data from user land to the Xen hypervisor the
Xen tools today are using mlock()ed buffers. Unfortunately the kernel
might change access rights of such buffers for brief periods of time
e.g. for page migration or compaction, leading to access faults in the
hypervisor, as the hypervisor can't use the locks of the kernel.
In order to solve this problem add a new device node to the Xen privcmd
driver to easily allocate hypercall buffers via mmap(). The memory is
allocated in the kernel and just mapped into user space. Marked as
VM_IO the user mapping will not be subject to page migration et al.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull drm fixes from Dave Airlie:
"Just run of the mill fixes,
core:
- regression fix in device unplug
qxl:
- regression fix for might sleep in cursor handling
nouveau:
- regression fix in multi-screen cursor handling
amdgpu:
- switch off DC by default on Kaveri and older
- some minor fixes
i915:
- some GEM regression fixes
- doublescan mode fixes
sun4i:
- revert fix for a regression
sii8620 bridge:
- misc fixes"
* tag 'drm-fixes-2018-06-22' of git://anongit.freedesktop.org/drm/drm: (28 commits)
drm/bridge/sii8620: fix display of packed pixel modes in MHL2
drm/amdgpu: Make amdgpu_vram_mgr_bo_invisible_size always accurate
drm/amdgpu: Refactor amdgpu_vram_mgr_bo_invisible_size helper
drm/amdgpu: Update pin_size values before unpinning BO
drm/amdgpu:All UVD instances share one idle_work handle
drm/amdgpu: Don't default to DC support for Kaveri and older
drm/amdgpu: Use kvmalloc_array for allocating VRAM manager nodes array
drm/amd/pp: Fix uninitialized variable
drm/i915: Enable provoking vertex fix on Gen9 systems.
drm/i915: Fix context ban and hang accounting for client
drm/i915: Turn off g4x DP port in .post_disable()
drm/i915: Disallow interlaced modes on g4x DP outputs
drm/i915: Fix PIPESTAT irq ack on i965/g4x
drm/i915: Allow DBLSCAN user modes with eDP/LVDS/DSI
drm/i915/execlists: Avoid putting the error pointer
drm/i915: Apply batch location restrictions before pinning
drm/nouveau/kms/nv50-: cursors always use core channel vram ctxdma
Revert "drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE"
drm/atmel-hlcdc: check stride values in the first plane
drm/bridge/sii8620: fix HDMI cable connection to dongle
...
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Fixes for v4.18-rc2:
- A reversion of a commit in drm/sun4i to fix a run-time fault.
- Various fixes to the sii8620 bridge.
- Small bugfix to correctly check stride in atmel-hlcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/787d4bef-a579-4046-d0fc-f8c2c5b80c25@linux.intel.com
|
|
The function cpdma_desc_pool_create is local to the source and does not
need to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'cpdma_desc_pool_create' was not declared. Should it
be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes using the controller with SDL2.
SDL2 has a naive algorithm to apply the correct settings to a controller.
For X-Box compatible controllers it expects that the controller name
contains a variation of a 'XBOX'-string.
This patch changes the identifier to contain "X-Box" as substring. Tested
with Steam and C-Dogs-SDL which both detect the controller properly after
adding this patch.
Fixes: c1ba08390a8b ("Input: xpad - add GPD Win 2 Controller USB IDs")
Cc: stable@vger.kernel.org
Signed-off-by: Enno Boland <gottox@voidlinux.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Commit 40f7090bb1b4 ("Input: elan_i2c_smbus - fix corrupted stack")
fixed most of the functions using i2c_smbus_read_block_data() to
allocate a buffer with the maximum block size. However three
functions were left unchanged:
* In elan_smbus_initialize(), increase the buffer size in the same
way.
* In elan_smbus_calibrate_result(), the buffer is provided by the
caller (calibrate_store()), so introduce a bounce buffer. Also
name the result buffer size.
* In elan_smbus_get_report(), the buffer is provided by the caller
but happens to be the right length. Add a compile-time assertion
to ensure this remains the case.
Cc: <stable@vger.kernel.org> # 3.19+
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Add ELAN0618 to the list of supported touchpads; this ID is used in
Lenovo v330 15IKB devices.
Signed-off-by: Alexandr Savca <alexandr.savca@saltedge.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Some touchpad has middle key and it will be indicated in bit 2 of packet[0].
We need to fix V4 formation's byte mask to prevent error decoding.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
PNPID is better way to identify the type of touchpads.
Enable middle button support on 2 types of touchpads on Lenovo P52.
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v4.18-rc2:
- Mostly cc: stable display fixes, including a DBLSCAN regression fix
- GEM fixes for this merge window
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87d0wkuypy.fsf@intel.com
|
|
The "sector is in requested range" test used to determine whether
sectors should be re-locked or not is done on a variable that is reset
everytime we cross a chip boundary, which can lead to some blocks being
re-locked while the caller expect them to be unlocked.
Fix the check to make sure this cannot happen.
Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Update the features after calling register_netdev() otherwise the
device features are not set up correctly and it not possible to change
the MTU of the device. After this change, the features reported by
ethtool match the device's features before the commit which introduced
the issue and it is possible to change the device's MTU.
Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open")
Reported-by: Liam Shepherd <liam@dancer.es>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cfi_ppb_unlock() tries to relock all sectors that were locked before
unlocking the whole chip.
This locking used the chip start address + the FULL offset from the
first flash chip, thereby forming an illegal address. Fix that by using
the chip offset(adr).
Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
do_ppb_xxlock() fails to add chip->start when querying for lock status
(and chip_ready test), which caused false status reports.
Fix that by adding adr += chip->start and adjust call sites
accordingly.
Fixes: 1648eaaa1575 ("mtd: cfi_cmdset_0002: Support Persistent Protection Bits (PPB) locking")
Cc: stable@vger.kernel.org
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Make sure we flag all broken chips as not supporting this feature.
Also move this logic to a new function to keep things readable.
Fixes: 34c5c01e0c8c ("mtd: rawnand: macronix: nack the support of changing timings for one chip")
Cc: <stable@vger.kernel.org>
Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Positive return value from read_oob() is making false BAD
blocks. For some of the NAND controllers, OOB bytes will be
protected with ECC and read_oob() will return number of bitflips.
If there is any bitflip in ECC protected OOB bytes for BAD block
status page, then that block is getting treated as BAD.
Fixes: c120e75e0e7d ("mtd: nand: use read_oob() instead of cmdfunc() for bad block check")
Cc: <stable@vger.kernel.org>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some fallout in the pin control subsystem in the first week after the
merge window, some minor fixes so I'd like to get it to you ASAP.
- fix a serious kernel panic on the Mediatek driver with the external
interrupt controller.
- fix an uninitialized compiler warning in the owl (actions) driver.
- allocation failure in the pinctrl-single driver.
- pointer overwrite problem in the i.MX driver.
- fix a small compiler warning"
* tag 'pinctrl-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: mt7622: fix a kernel panic when pio don't work as EINT controller
pinctrl: actions: Fix uninitialized error in owl_pin_config_set()
pinctrl: single: Add allocation failure checking of saved_vals
pinctrl: devicetree: Fix pctldev pointer overwrite
pinctrl: mediatek: remove redundant return value check of platform_get_resource()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- fix a loop limit in nct6775 driver
- disable fan support for Dell XPS13 9333
* tag 'hwmon-for-linus-v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix loop limit
hwmon: (dell-smm) Disable fan support for Dell XPS13 9333
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a suspend/resume regression in the ACPI driver for Intel
SoCs (LPSS), add a new system wakeup quirk to the ACPI EC driver and
fix an inline stub of a function in the ACPI processor driver that
diverged from the original.
Specifics:
- Fix a suspend/resume regression in the ACPI driver for Intel SoCs
(LPSS) to make it work on systems where some power management
quirks should only be applied for runtime PM and suspend-to-idle
and not for suspend-to-RAM (Rafael Wysocki).
- Add a system wakeup quirk for Thinkpad X1 Carbon 6th to the ACPI EC
driver to avoid drainig battery too fast while suspended to idle on
those systems (Mika Westerberg).
- Fix an inline stub of acpi_processor_ppc_has_changed() to match the
original function definition (Brian Norris)"
* tag 'acpi-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / processor: Finish making acpi_processor_ppc_has_changed() void
ACPI / EC: Use ec_no_wakeup on Thinkpad X1 Carbon 6th
ACPI / LPSS: Avoid PM quirks on suspend and resume from S3
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These are mostly fixes, including some fixes for changes made during
the recent merge window and some "stable" material, plus some minor
extensions of the turbostat utility.
Specifics:
- Fix the PM core to avoid introducing a runtime PM usage counter
imbalance when adding device links during driver probe (Rafael
Wysocki).
- Fix the operating performance points (OPP) framework to ensure that
the regulator voltage is always updated as appropriate when
updating clock rates (Waldemar Rymarkiewicz).
- Fix the intel_pstate driver to use correct max/min limits for cores
with differing maximum frequences (Srinivas Pandruvada).
- Fix a typo in the intel_pstate driver documentation (Rafael
Wysocki).
- Fix two issues with the recently added Kryo cpufreq driver (Ilia
Lin).
- Fix two recent regressions and some other minor issues in the
turbostat utility and extend it to provide some more diagnostic
information (Len Brown, Nathan Ciobanu)"
* tag 'pm-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: intel_pstate: Fix typo
tools/power turbostat: version 18.06.20
tools/power turbostat: add the missing command line switches
tools/power turbostat: add single character tokens to help
tools/power turbostat: alphabetize the help output
tools/power turbostat: fix segfault on 'no node' machines
tools/power turbostat: add optional APIC X2APIC columns
tools/power turbostat: decode cpuid.1.HT
tools/power turbostat: fix show/hide issues resulting from mis-merge
PM / OPP: Update voltage in case freq == old_freq
cpufreq: intel_pstate: Fix scaling max/min limits with Turbo 3.0
cpufreq: kryo: Add module remove and exit
cpufreq: kryo: Fix possible error code dereference
PM / core: Fix supplier device runtime PM usage counter imbalance
|
|
nvme requires an sg table allocation for each request. If the request
is large, then the allocation can become quite large. For instance,
with our default software settings of 1280KB IO size, we'll need
10248 bytes of sg table. That turns into a 2nd order allocation,
which we can't always guarantee. If we fail the allocation, blk-mq
will retry it later. But there's no guarantee that we'll EVER be
able to allocate that much contigious memory.
Limit the IO size such that we never need more than a single page
of memory. That's a lot faster and more reliable. Then back that
allocation with a mempool, so that we know we'll always be able
to succeed the allocation at some point.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
There is race between nvme_remove and nvme_reset_work that can
lead to io hang.
nvme_remove nvme_reset_work
-> nvme_remove_dead_ctrl
-> nvme_dev_disable
-> quiesce request_queue
-> queue remove_work
-> cancel_work_sync reset_work
-> nvme_remove_namespaces
-> splice ctrl->namespaces
nvme_remove_dead_ctrl_work
-> nvme_kill_queues
-> nvme_ns_remove do nothing
-> blk_cleanup_queue
-> blk_freeze_queue
Finally, the request_queue is quiesced state when wait freeze,
we will get io hang here. To fix it, move the nvme_kill_queues
from nvme_remove_dead_ctrl_work to nvme_remove_dead_ctrl.
Suggested-by: Keith Busch <keith.busch@linux.intel.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
These are a stable-candidate suspend/resume fix of the ACPI driver for
Intel SoCs (LPSS) and an inline stub fix for the ACPI processor driver.
* acpi-soc:
ACPI / LPSS: Avoid PM quirks on suspend and resume from S3
* acpi-processor:
ACPI / processor: Finish making acpi_processor_ppc_has_changed() void
|
|
These are a PM core fix and an OPP framework fix for 4.18-rc2,
both "stable" material.
* pm-core:
PM / core: Fix supplier device runtime PM usage counter imbalance
* pm-opp:
PM / OPP: Update voltage in case freq == old_freq
|
|
Currently packed pixel modes in MHL2 can't be displayed. The device
automatically recognizes output format, so setting format other than
RGB causes failure. Fix it by writing proper values to registers.
Tested on MHL1 and MHL2 using various vendors' dongles both in
DVI and HDMI mode.
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1516706239-9104-1-git-send-email-m.purski@samsung.com
|
|
Rather than leaving io queues quiesced after tearing down an association,
restart them. This allows ios to be replayed, with fastfail ios terminating
and non-fastfail getting into loops of retry.
This follows rdma's lead.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimber.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
When delta passed to gem_ptp_adjtime is negative, the sign is
maintained in the ns_to_timespec64 conversion. Hence timespec_add
should be used directly. timespec_sub will just subtract the negative
value thus increasing the time difference.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 296d48568042 ("ipvlan: inherit MTU from master device") adjusted
the mtu from the master device when creating a ipvlan device, but it
would also override the mtu value set in rtnl_create_link. It causes
IFLA_MTU param not to take effect.
So this patch is to not adjust the mtu if IFLA_MTU param is set when
creating a ipvlan device.
Fixes: 296d48568042 ("ipvlan: inherit MTU from master device")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When injecting frames in the Ocelot switch driver an injection header
(IFH) should be used to configure various parameters related to a given
frame, such as the port onto which the frame should be departed or its
vlan id. Other parameters in the switch configuration can led to an
injected frame being sent without an IFH but this led to various issues
as the per-frame parameters are then not used. This is especially true
when using multiple ports for injection.
The IFH was injected with the wrong endianness which led to the switch
not taking it into account as the IFH_INJ_BYPASS bit was then unset.
(The bit tells the switch to use the IFH over its internal
configuration). This patch fixes it.
In addition to the endianness fix, the IFH is also fixed. As it was
(unwillingly) unused, some of its fields were not configured the right
way.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Device tree based systems without of_dev_auxdata will have the mdio
device named differently than "davinci_mdio(.0)". In this case use the
device's parent's compatible string for matching
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will
issue a disconnect from nbd_release if the device has no remaining
bdev->bd_openers.
Fix ret val so reconfigure with only setting the flag succeeds.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pass the correct thing to rtl8169_interrupt() from netpoll.
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Cc: netdev@vger.kernel.org
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Fixes: ebcd5daa7ffd ("r8169: change interrupt handler argument type")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
into drm-fixes
Bunch of amdgpu fixes mostly all going to stable.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180620190021.2775-1-alexander.deucher@amd.com
|
|
Pull rdma fixes from Jason Gunthorpe:
"Here are eight fairly small fixes collected over the last two weeks.
Regression and crashing bug fixes:
- mlx4/5: Fixes for issues found from various checkers
- A resource tracking and uverbs regression in the core code
- qedr: NULL pointer regression found during testing
- rxe: Various small bugs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/rxe: Fix missing completion for mem_reg work requests
RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
IB/mlx5: Fix return value check in flow_counters_set_data()
IB/mlx5: Fix memory leak in mlx5_ib_create_flow
IB/rxe: avoid double kfree skb
|
|
Pull networking fixes from David Miller:
1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann.
2) Fix ATM VCC memory accounting, from David Woodhouse.
3) fib6_info objects need RCU freeing, from Eric Dumazet.
4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern.
5) Fix clobbered error code in enic_open() failure path, from
Govindarajulu Varadarajan.
6) Propagate dev_get_valid_name() error returns properly, from Li
RongQing.
7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski.
8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from
Davide Caratti.
9) Fix buggy checksum handling in sungem driver, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
ip: limit use of gso_size to udp
stmmac: fix DMA channel hang in half-duplex mode
net: stmmac: socfpga: add additional ocp reset line for Stratix10
net: sungem: fix rx checksum support
bpfilter: ignore binary files
bpfilter: fix build error
net/usb/drivers: Remove useless hrtimer_active check
net/sched: act_ife: preserve the action control in case of error
net/sched: act_ife: fix recursive lock and idr leak
net: ethernet: fix suspend/resume in davinci_emac
net: propagate dev_get_valid_name return code
enic: do not overwrite error code
net/tcp: Fix socket lookups with SO_BINDTODEVICE
ptp: replace getnstimeofday64() with ktime_get_real_ts64()
net/ipv6: respect rcu grace period before freeing fib6_info
net: net_failover: fix typo in net_failover_slave_register()
ipvlan: use ETH_MAX_MTU as max mtu
net: hamradio: use eth_broadcast_addr
enic: initialize enic->rfs_h.lock in enic_probe
MAINTAINERS: Add Sam as the maintainer for NCSI
...
|
|
Controllers that are not yet enabled should not really enforce keep alive
timeouts, but we still want to track a timeout and cleanup in case a host
died before it enabled the controller. Hence, simply reset the keep
alive timer when the controller is enabled.
Suggested-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
That is user argument, and theoretically controller limits can change
over time (over reconnects/resets). Instead, use the sqsize controller
attribute to check queue depth boundaries and use it to the tagset
allocation.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The race is between completing the request at error recovery work and
rdma completions. If we cancel the request before getting the good
rdma completion we get a NULL deref of the request MR at
nvme_rdma_process_nvme_rsp().
When Canceling the request we return its mr to the mr pool (set mr to
NULL) and also unmap its data. Canceling the requests while the rdma
queues are active is not safe. Because rdma queues are active and we
get good rdma completions that can use the mr pointer which may be NULL.
Completing the request too soon may lead also to performing DMA to/from
user buffers which might have been already unmapped.
The commit fixes the race by draining the QP before starting the abort
commands mechanism.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|