Age | Commit message (Collapse) | Author | Files | Lines |
|
Since that should be the correct place to put ASIC specific
workarounds.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If dc reported by gpio is supported, the power source switching will
be performed by pmfw automatically. Thus the power source setting
workaround for Navi1x will be not needed.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Process any pending interrupt that occured before driver register
for interrupt from GPIO/SMU.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Which tells it's a normal pstate change or memory retraining.
Signed-off-by: Evan Quan <[email protected]>
Tested-by: Changfeng Zhu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Which tells it's a normal pstate change or memory retraining.
Signed-off-by: Evan Quan <[email protected]>
Tested-by: Changfeng Zhu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The convertion to "struct dm_pp_clock_range_for_mcif_wm_set_soc15"
is totally unnecessary and can be dropped.
Signed-off-by: Evan Quan <[email protected]>
Tested-by: Changfeng Zhu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Raven never goes to swsmu path. So "adev->smu.ppt_funcs" will be
always false.
Signed-off-by: Evan Quan <[email protected]>
Tested-by: Changfeng Zhu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Drop unneeded "ret".
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Either this was already performed in parent API. Or the table is
confirmed to exist.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
As these operations are performed in hardware setup and there
is actually no race conditions during this period considering:
1. the hardware setup is serial and cannot be in parallel
2. all other operations can be performed only after hardware
setup complete.
V2: rich the commit log description
Signed-off-by: Evan Quan <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
As these operations are performed in hardware setup and there
is actually no race conditions during this period considering:
1. the hardware setup is serial and cannot be in parallel
2. all other operations can be performed only after hardware
setup complete.
V2: rich the commit log description
Signed-off-by: Evan Quan <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
And to fit more accurately what the cod does.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The workaround can be applied only with UCLK DPM enabled.
And expand the workaround to more Navi10 SKUs and also
Navi14.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
And different workaround will be applied based on hybrid cdr bit.
V2: add pmfw version guard to make sure the new workaround applied only
with pmfw >= 42.53.0
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
By uploading dummy pstate tables.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This dummy reading buffer will be used for the new Navi1x
UMC CDR workaround.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Drop the unused message(SMU_MSG_DAL_DISABLE_DUMMY_PSTATE_CHANGE).
And do not apply this workaround when the max uclk frequency
is greater than 750Mhz.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
That's where the uclk dpm get enabled and then the
uclk cdr workaround can be applied.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This is needed for Navi1X only. And it may help for display missing
or hang issue seen on some high resolution monitors.
V2: no UCLK DPM enablement for Navi10 A0 secure SKU
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
So that ASIC specific actions can be added.
V2: better namings
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Don't check drm_crtc_state::active for this either, per its
documentation in include/drm/drm_crtc.h:
* Hence drivers must not consult @active in their various
* &drm_mode_config_funcs.atomic_check callback to reject an atomic
* commit.
atomic_remove_fb disables the CRTC as needed for disabling the primary
plane.
This prevents at least the following problems if the primary plane gets
disabled (e.g. due to destroying the FB assigned to the primary plane,
as happens e.g. with mutter in Wayland mode):
* The legacy cursor ioctl returned EINVAL for a non-0 cursor FB ID
(which enables the cursor plane).
* If the cursor plane was enabled, changing the legacy DPMS property
value from off to on returned EINVAL.
v2:
* Minor changes to code comment and commit log, per review feedback.
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1108
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1165
GitLab: https://gitlab.gnome.org/GNOME/mutter/-/issues/1344
Suggested-by: Daniel Vetter <[email protected]>
Acked-by: Daniel Vetter <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Michel Dänzer <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Copy paste typo.
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Due to hardware bugs, scatter/gather display on raven requires
a 1:1 IOMMU mapping, however, SME (System Memory Encryption)
requires an indirect IOMMU mapping because the encryption bit
is beyond the DMA mask of the chip. As such, the two are
incompatible.
Acked-by: Joerg Roedel <[email protected]>
Reviewed-by: Christian König <[email protected]>
Acked-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add trigger_hotplug debugfs entry.
Fixes: 6f77b2ac6280 ("drm/amd/display: Add connector HPD trigger debugfs entry")
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If parse_write_buffer_into_params() fails, we should free
wr_buf before return.
Fixes: 6f77b2ac6280 ("drm/amd/display: Add connector HPD trigger debugfs entry")
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
In fnction is_cr_done & is_ch_eq_done, when done = false
happened once, no need to circle left ln_count.
This change is to make the code run a bit fast.
Signed-off-by: Bernard Zhao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1003:4-9: WARNING: Comparison to bool
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c:1083:5-11: WARNING: Comparison to bool
Acked-by: Christian König <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c:619:15-49: WARNING: Comparison to bool
drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c:629:15-49: WARNING: Comparison to bool
Acked-by: Christian König <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/uvd_v6_0.c:1243:14-25: WARNING: Comparison to bool
Acked-by: Christian König <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/si.c:1342:5-10: WARNING: Comparison to bool
Acked-by: Christian König <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/sdma_v5_2.c:562:5-11: WARNING: Comparison to bool
Acked-by: Christian König <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/sdma_v5_0.c:619:5-11: WARNING: Comparison to bool
Acked-by: Christian König <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c:3563:5-31: WARNING: Comparison to bool
Acked-by: Christian König <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fixes coccicheck warning:
drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:2805:5-11: WARNING: Comparison to bool
Acked-by: Christian König <[email protected]>
Signed-off-by: Zheng Bin <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This patch adds support for reporting sclk values for Radeon GPUs, where supported.
Signed-off-by: Sandeep Raghuraman <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix kernel-doc warnings.
drivers/gpu/drm/scheduler/sched_fence.c:110: warning: Function parameter or
member 'f' not described in 'drm_sched_fence_release_scheduled'
drivers/gpu/drm/scheduler/sched_fence.c:110: warning: Excess function
parameter 'fence' description in 'drm_sched_fence_release_scheduled'
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Tian Tao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix spellos of "function" in drivers/gpu/drm/amd/display/.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Harry Wentland <[email protected]>
Cc: Leo Li <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Alex Deucher <[email protected]>
|
|
Remove duplicate header which is included twice.
Signed-off-by: Chen Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Disabling perf events does not specify reset in ABI so stop doing it in
hardware.
Signed-off-by: Jonathan Kim <[email protected]>
Reviewed-by: Harish Kasiviswanathan <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Turns out this breaks a lot of different hardware.
This reverts commit fc8c70526bd30733ea8667adb8b8ffebea30a8ed.
Signed-off-by: Christian König <[email protected]>
Acked-by: Nirmoy Das <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add more accurate description of the pe parameter of function
amdgpu_vm_sdma_udpate and amdgpu_vm_cpu_update
Signed-off-by: Oak Zeng <[email protected]>
Reviewed-by: Christian Konig <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add comments to refect what function does
Signed-off-by: Oak Zeng <[email protected]>
Reviewed-by: Christian Konig <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Create sysfs interface also for sienna_cichlid.
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Andrey Grodzovsky <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Seamless boot skip porgram clock when set path mode.
It cause driverprogram clock after unblank stream.
[How]
update clock when non-seamless boot stream exist
Signed-off-by: Lewis Huang <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Dmytro Laktyushkin <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
Some SOC BB paramters may vary per SKU, and it does
not make sense for driver to hardcode these values
[how]
Parse the values from VBIOS if available, and use
them if valid
Signed-off-by: Jun Lei <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
psr doesn't get fully disabled before hitting hubbub1_wm_change_req_wa.
[How]
Pass TRUE to "wait" parameter to get psr fully disabled.
Follow-Up fix to:
dc: PSR eDP p-state warning occurs intermittently after unplug DP
Signed-off-by: Fangzhi Zuo <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
Recent characterization shows increased stutter latencies on some SKUs,
leading to underflow.
[how]
Update SOC params to account for this worst case latency.
Signed-off-by: Jun Lei <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
gcc version 5.4.0 fails compilation with:
‘PixelPTEReqHeightPTEs’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
[How]
Initialized variable explicitly with 0
Signed-off-by: Roman Li <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
The ctx field of dc_transfer_func is not always populated and therefore
isn't reliable.
[How]
Remove dc context from dc_transfer_func
Signed-off-by: Josip Pavic <[email protected]>
Acked-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|