aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2023-08-07wireguard: allowedips: expand maximum node depthJason A. Donenfeld2-10/+14
In the allowedips self-test, nodes are inserted into the tree, but it generated an even amount of nodes, but for checking maximum node depth, there is of course the root node, which makes the total number necessarily odd. With two few nodes added, it never triggered the maximum depth check like it should have. So, add 129 nodes instead of 128 nodes, and do so with a more straightforward scheme, starting with all the bits set, and shifting over one each time. Then increase the maximum depth to 129, and choose a better name for that variable to make it clear that it represents depth as opposed to bits. Cc: [email protected] Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-07bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slavesZiyang Xuan1-1/+3
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with following testcase: # ip netns add ns1 # ip netns exec ns1 ip link add bond0 type bond mode 0 # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 # ip netns exec ns1 ip link set bond_slave_1 master bond0 # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad # ip netns exec ns1 ip link set bond_slave_1 nomaster # ip netns del ns1 The logical analysis of the problem is as follows: 1. create ETH_P_8021AD protocol vlan10 for bond_slave_1: register_vlan_dev() vlan_vid_add() vlan_info_alloc() __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1 2. create ETH_P_8021AD protocol bond0_vlan10 for bond0: register_vlan_dev() vlan_vid_add() __vlan_vid_add() vlan_add_rx_filter_info() if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER return 0; if (netif_device_present(dev)) return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid. 3. detach bond_slave_1 from bond0: __bond_release_one() vlan_vids_del_by_dev() list_for_each_entry(vid_info, &vlan_info->vid_list, list) vlan_vid_del(dev, vid_info->proto, vid_info->vid); // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted. // bond_slave_1->vlan_info will be assigned NULL. 4. delete vlan10 during delete ns1: default_device_exit_batch() dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10 vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1 BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!! Add S-VLAN tag related features support to bond driver. So the bond driver will always propagate the VLAN info to its slaves. Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel <[email protected]> Signed-off-by: Ziyang Xuan <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-07net/mlx5e: Add capability check for vnic countersLama Kayal1-49/+67
Add missing capability check for each of the vnic counters exposed by devlink health reporter, and thus avoid unexpected behavior due to invalid access to registers. While at it, read only the exact number of bits for each counter whether it was 32 bits or 64 bits. Fixes: b0bc615df488 ("net/mlx5: Add vnic devlink health reporter to PFs/VFs") Fixes: a33682e4e78e ("net/mlx5e: Expose catastrophic steering error counters") Signed-off-by: Lama Kayal <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Maher Sanalla <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Reload auxiliary devices in pci error handlersMoshe Shemesh1-1/+1
Handling pci errors should fully teardown and load back auxiliary devices, same as done through mlx5 health recovery flow. Fixes: 72ed5d5624af ("net/mlx5: Suspend auxiliary devices only in case of PCI device suspend") Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Skip clock update work when device is in error stateMoshe Shemesh1-0/+5
When device is in error state, marked by the flag MLX5_DEVICE_STATE_INTERNAL_ERROR, the HW and PCI may not be accessible and so clock update work should be skipped. Furthermore, such access through PCI in error state, after calling mlx5_pci_disable_device() can result in failing to recover from pci errors. Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support") Reported-and-tested-by: Ganesh G R <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected] Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Aya Levin <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: LAG, Check correct bucket when modifying LAGShay Drory1-1/+1
Cited patch introduced buckets in hash mode, but missed to update the ports/bucket check when modifying LAG. Fix the check. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5e: Unoffload post act rule when handling FIB eventsChris Mi1-2/+4
If having the following tc rule on stack device: filter parent ffff: protocol ip pref 3 flower chain 1 filter parent ffff: protocol ip pref 3 flower chain 1 handle 0x1 dst_mac 24:25:d0:e1:00:00 src_mac 02:25:d0:25:01:02 eth_type ipv4 ct_state +trk+new in_hw in_hw_count 1 action order 1: ct commit zone 0 pipe index 2 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec Action statistics: Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 2: tunnel_key set src_ip 192.168.1.25 dst_ip 192.168.1.26 key_id 4 dst_port 4789 csum pipe index 3 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec Action statistics: Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed action order 3: mirred (Egress Redirect to device vxlan1) stolen index 9 ref 1 bind 1 installed 3807 sec used 3779 sec firstused 3800 sec Action statistics: Sent 120 bytes 2 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 used_hw_stats delayed When handling FIB events, the rule in post act will not be deleted. And because the post act rule has packet reformat and modify header actions, also will hit the following syndromes: mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_MODIFY_HEADER_CONTEXT(0x941) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x1ab444), err(-22) mlx5_core 0000:08:00.0: mlx5_cmd_out_err:829:(pid 11613): DEALLOC_PACKET_REFORMAT_CONTEXT(0x93e) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x179e84), err(-22) Fix it by unoffloading post act rule when handling FIB events. Fixes: 314e1105831b ("net/mlx5e: Add post act offload/unoffload API") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Fix devlink controller number for ECVFDaniel Jurgens1-1/+1
The controller number for ECVFs is always 0, because the ECPF must be the eswitch owner for EC VFs to be enabled. Fixes: dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") Signed-off-by: Daniel Jurgens <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Allow 0 for total host VFsDaniel Jurgens1-2/+1
When querying eswitch functions 0 is a valid number of host VFs. After introducing ARM SRIOV falling through to getting the max value from PCI results in using the total VFs allowed on the ARM for the host. Fixes: 86eec50beaf3 ("net/mlx5: Support querying max VFs from device"); Signed-off-by: Daniel Jurgens <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: Return correct EC_VF function IDDaniel Jurgens1-1/+1
The ECVF function ID range is 1..max_ec_vfs. Currently mlx5_vport_to_func_id returns 0..max_ec_vfs - 1. Which results in a syndrome when querying the caps with more recent firmware, or reading incorrect caps with older firmware that supports EC VFs. Fixes: 9ac0b128248e ("net/mlx5: Update vport caps query/set for EC VFs") Signed-off-by: Daniel Jurgens <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5: DR, Fix wrong allocation of modify hdr patternYevgeny Kliteynik1-1/+1
Fixing wrong calculation of the modify hdr pattern size, where the previously calculated number would not be enough to accommodate the required number of actions. Fixes: da5d0027d666 ("net/mlx5: DR, Add cache for modify header pattern") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Erez Shitrit <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5e: TC, Fix internal port memory leakJianbo Liu1-8/+13
The flow rule can be splited, and the extra post_act rules are added to post_act table. It's possible to trigger memleak when the rule forwards packets from internal port and over tunnel, in the case that, for example, CT 'new' state offload is allowed. As int_port object is assigned to the flow attribute of post_act rule, and its refcnt is incremented by mlx5e_tc_int_port_get(), but mlx5e_tc_int_port_put() is not called, the refcnt is never decremented, then int_port is never freed. The kmemleak reports the following error: unreferenced object 0xffff888128204b80 (size 64): comm "handler20", pid 50121, jiffies 4296973009 (age 642.932s) hex dump (first 32 bytes): 01 00 00 00 19 00 00 00 03 f0 00 00 04 00 00 00 ................ 98 77 67 41 81 88 ff ff 98 77 67 41 81 88 ff ff .wgA.....wgA.... backtrace: [<00000000e992680d>] kmalloc_trace+0x27/0x120 [<000000009e945a98>] mlx5e_tc_int_port_get+0x3f3/0xe20 [mlx5_core] [<0000000035a537f0>] mlx5e_tc_add_fdb_flow+0x473/0xcf0 [mlx5_core] [<0000000070c2cec6>] __mlx5e_add_fdb_flow+0x7cf/0xe90 [mlx5_core] [<000000005cc84048>] mlx5e_configure_flower+0xd40/0x4c40 [mlx5_core] [<000000004f8a2031>] mlx5e_rep_indr_offload.isra.0+0x10e/0x1c0 [mlx5_core] [<000000007df797dc>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core] [<0000000016c15cc3>] tc_setup_cb_add+0x1cf/0x410 [<00000000a63305b4>] fl_hw_replace_filter+0x38f/0x670 [cls_flower] [<000000008bc9e77c>] fl_change+0x1fd5/0x4430 [cls_flower] [<00000000e7f766e4>] tc_new_tfilter+0x867/0x2010 [<00000000e101c0ef>] rtnetlink_rcv_msg+0x6fc/0x9f0 [<00000000e1111d44>] netlink_rcv_skb+0x12c/0x360 [<0000000082dd6c8b>] netlink_unicast+0x438/0x710 [<00000000fc568f70>] netlink_sendmsg+0x794/0xc50 [<0000000016e92590>] sock_sendmsg+0xc5/0x190 So fix this by moving int_port cleanup code to the flow attribute free helper, which is used by all the attribute free cases. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07net/mlx5e: Take RTNL lock when needed before calling xdp_set_features()Gal Pressman1-0/+11
Hold RTNL lock when calling xdp_set_features() with a registered netdev, as the call triggers the netdev notifiers. This could happen when switching from uplink rep to nic profile for example. This resolves the following call trace: RTNL: assertion failed at net/core/dev.c (1953) WARNING: CPU: 6 PID: 112670 at net/core/dev.c:1953 call_netdevice_notifiers_info+0x7c/0x80 Modules linked in: sch_mqprio sch_mqprio_lib act_tunnel_key act_mirred act_skbedit cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress bonding ib_umad ip_gre rdma_ucm mlx5_vfio_pci ipip tunnel4 ip6_gre gre mlx5_ib vfio_pci vfio_pci_core vfio_iommu_type1 ib_uverbs vfio mlx5_core ib_ipoib geneve nf_tables ip6_tunnel tunnel6 iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs] CPU: 6 PID: 112670 Comm: devlink Not tainted 6.4.0-rc7_for_upstream_min_debug_2023_06_28_17_02 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:call_netdevice_notifiers_info+0x7c/0x80 Code: 90 ff 80 3d 2d 6b f7 00 00 75 c5 ba a1 07 00 00 48 c7 c6 e4 ce 0b 82 48 c7 c7 c8 f4 04 82 c6 05 11 6b f7 00 01 e8 a4 7c 8e ff <0f> 0b eb a2 0f 1f 44 00 00 55 48 89 e5 41 54 48 83 e4 f0 48 83 ec RSP: 0018:ffff8882a21c3948 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff82e6f880 RCX: 0000000000000027 RDX: ffff88885f99b5c8 RSI: 0000000000000001 RDI: ffff88885f99b5c0 RBP: 0000000000000028 R08: ffff88887ffabaa8 R09: 0000000000000003 R10: ffff88887fecbac0 R11: ffff88887ff7bac0 R12: ffff8882a21c3968 R13: ffff88811c018940 R14: 0000000000000000 R15: ffff8881274401a0 FS: 00007fe141c81800(0000) GS:ffff88885f980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f787c28b948 CR3: 000000014bcf3005 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __warn+0x79/0x120 ? call_netdevice_notifiers_info+0x7c/0x80 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? call_netdevice_notifiers_info+0x7c/0x80 ? call_netdevice_notifiers_info+0x7c/0x80 call_netdevice_notifiers+0x2e/0x50 mlx5e_set_xdp_feature+0x21/0x50 [mlx5_core] mlx5e_nic_init+0xf1/0x1a0 [mlx5_core] mlx5e_netdev_init_profile+0x76/0x110 [mlx5_core] mlx5e_netdev_attach_profile+0x1f/0x90 [mlx5_core] mlx5e_netdev_change_profile+0x92/0x160 [mlx5_core] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] mlx5e_vport_rep_unload+0xaa/0xc0 [mlx5_core] __esw_offloads_unload_rep+0x52/0x60 [mlx5_core] mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core] esw_offloads_unload_rep+0x34/0x70 [mlx5_core] esw_offloads_disable+0x2b/0x90 [mlx5_core] mlx5_eswitch_disable_locked+0x1b9/0x210 [mlx5_core] mlx5_devlink_eswitch_mode_set+0xf5/0x630 [mlx5_core] ? devlink_get_from_attrs_lock+0x9e/0x110 devlink_nl_cmd_eswitch_set_doit+0x60/0xe0 genl_family_rcv_msg_doit.isra.0+0xc2/0x110 genl_rcv_msg+0x17d/0x2b0 ? devlink_get_from_attrs_lock+0x110/0x110 ? devlink_nl_cmd_eswitch_get_doit+0x290/0x290 ? devlink_pernet_pre_exit+0xf0/0xf0 ? genl_family_rcv_msg_doit.isra.0+0x110/0x110 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x232/0x4a0 sock_sendmsg+0x38/0x60 ? _copy_from_user+0x2a/0x60 __sys_sendto+0x110/0x160 ? __count_memcg_events+0x48/0x90 ? handle_mm_fault+0x161/0x260 ? do_user_addr_fault+0x278/0x6e0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fe141b1340a Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007fff61d03de8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000afab00 RCX: 00007fe141b1340a RDX: 0000000000000038 RSI: 0000000000afab00 RDI: 0000000000000003 RBP: 0000000000afa910 R08: 00007fe141d80200 R09: 000000000000000c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 </TASK> Fixes: 4d5ab0ad964d ("net/mlx5e: take into account device reconfiguration for xdp_features flag") Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-08-07tpm/tpm_tis: Disable interrupts for Lenovo P620 devicesJonathan McDowell1-0/+8
The Lenovo ThinkStation P620 suffers from an irq storm issue like various other Lenovo machines, so add an entry for it to tpm_tis_dmi_table and force polling. It is worth noting that 481c2d14627d (tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs) does not seem to fix the problem on this machine, but setting 'tpm_tis.interrupts=0' on the kernel command line does. [[email protected]: truncated the commit ID in the description to 12 characters] Cc: [email protected] # v6.4+ Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Signed-off-by: Jonathan McDowell <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-08-07tpm: Disable RNG for all AMD fTPMsMario Limonciello2-66/+32
The TPM RNG functionality is not necessary for entropy when the CPU already supports the RDRAND instruction. The TPM RNG functionality was previously disabled on a subset of AMD fTPM series, but reports continue to show problems on some systems causing stutter root caused to TPM RNG functionality. Expand disabling TPM RNG use for all AMD fTPMs whether they have versions that claim to have fixed or not. To accomplish this, move the detection into part of the TPM CRB registration and add a flag indicating that the TPM should opt-out of registration to hwrng. Cc: [email protected] # 6.1.y+ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs") Reported-by: [email protected] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217719 Reported-by: [email protected] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217212 Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-08-07tpm/tpm_tis: Disable interrupts for TUXEDO InfinityBook S 15/17 Gen7Takashi Iwai1-0/+8
TUXEDO InfinityBook S 15/17 Gen7 suffers from an IRQ problem on tpm_tis like a few other laptops. Add an entry for the workaround. Cc: [email protected] Fixes: e644b2f498d2 ("tpm, tpm_tis: Enable interrupt test") Link: https://bugzilla.suse.com/show_bug.cgi?id=1213645 Signed-off-by: Takashi Iwai <[email protected]> Acked-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-08-07cpufreq: amd-pstate: fix global sysfs attribute typeThomas Weißschuh1-5/+5
In commit 3666062b87ec ("cpufreq: amd-pstate: move to use bus_get_dev_root()") the "amd_pstate" attributes where moved from a dedicated kobject to the cpu root kobject. While the dedicated kobject expects to contain kobj_attributes the root kobject needs device_attributes. As the changed arguments are not used by the callbacks it works most of the time. However CFI will detect this issue: [ 4947.849350] CFI failure at dev_attr_show+0x24/0x60 (target: show_status+0x0/0x70; expected type: 0x8651b1de) ... [ 4947.849409] Call Trace: [ 4947.849410] <TASK> [ 4947.849411] ? __warn+0xcf/0x1c0 [ 4947.849414] ? dev_attr_show+0x24/0x60 [ 4947.849415] ? report_cfi_failure+0x4e/0x60 [ 4947.849417] ? handle_cfi_failure+0x14c/0x1d0 [ 4947.849419] ? __cfi_show_status+0x10/0x10 [ 4947.849420] ? handle_bug+0x4f/0x90 [ 4947.849421] ? exc_invalid_op+0x1a/0x60 [ 4947.849422] ? asm_exc_invalid_op+0x1a/0x20 [ 4947.849424] ? __cfi_show_status+0x10/0x10 [ 4947.849425] ? dev_attr_show+0x24/0x60 [ 4947.849426] sysfs_kf_seq_show+0xa6/0x110 [ 4947.849433] seq_read_iter+0x16c/0x4b0 [ 4947.849436] vfs_read+0x272/0x2d0 [ 4947.849438] ksys_read+0x72/0xe0 [ 4947.849439] do_syscall_64+0x76/0xb0 [ 4947.849440] ? do_user_addr_fault+0x252/0x650 [ 4947.849442] ? exc_page_fault+0x7a/0x1b0 [ 4947.849443] entry_SYSCALL_64_after_hwframe+0x72/0xdc Fixes: 3666062b87ec ("cpufreq: amd-pstate: move to use bus_get_dev_root()") Reported-by: Jannik Glückert <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217765 Link: https://lore.kernel.org/lkml/[email protected]/ Cc: All applicable <[email protected]> Signed-off-by: Thomas Weißschuh <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-08-07Merge tag 'mmc-v6.5-rc1' of ↵Linus Torvalds2-40/+28
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - moxart: Fix big-endian conversion for SCR structure - sdhci-f-sdh30: Replace with sdhci_pltfm to fix PM support * tag 'mmc-v6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-f-sdh30: Replace with sdhci_pltfm mmc: moxart: read scr register without changing byte order
2023-08-07dmaengine: xilinx: xdma: Fix typoMiquel Raynal1-1/+1
Probably a copy/paste error with the previous block, here we are actually managing C2H IRQs. Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver") Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-08-07dmaengine: xilinx: xdma: Fix interrupt vector settingMiquel Raynal1-0/+2
A couple of hardware registers need to be set to reflect which interrupts have been allocated to the device. Each register is 32-bit wide and can receive four 8-bit values. If we provide any other interrupt number than four, the irq_num variable will never be 0 within the while check and the while block will loop forever. There is an easy way to prevent this: just break the for loop when we reach "irq_num == 0", which anyway means all interrupts have been processed. Cc: [email protected] Fixes: 17ce252266c7 ("dmaengine: xilinx: xdma: Add xilinx xdma driver") Signed-off-by: Miquel Raynal <[email protected]> Acked-by: Lizhi Hou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-08-07dmaengine: owl-dma: Modify mismatched function nameZhang Jianhua1-1/+1
No functional modification involved. drivers/dma/owl-dma.c:208: warning: expecting prototype for struct owl_dma_pchan. Prototype was for struct owl_dma_vchan instead HDRTEST usr/include/sound/asequencer.h Fixes: 47e20577c24d ("dmaengine: Add Actions Semi Owl family S900 DMA driver") Signed-off-by: Zhang Jianhua <[email protected]> Reviewed-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-08-07dmaengine: idxd: Clear PRS disable flag when disabling IDXD deviceFenghua Yu1-3/+1
Disabling IDXD device doesn't reset Page Request Service (PRS) disable flag to its initial value 0. This may cause user confusion because once PRS is disabled user will see PRS still remains the previous setting (i.e. disabled) via sysfs interface even after the device is disabled. To eliminate user confusion, reset PRS disable flag to ensure that the PRS flag bit reflects correct state after the device is disabled. Additionally, simplify the code by setting wq->flags to 0, which clears all flag bits, including any future additions. Fixes: f2dc327131b5 ("dmaengine: idxd: add per wq PRS disable") Tested-by: Tony Zhu <[email protected]> Signed-off-by: Fenghua Yu <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-08-07dmaengine: pl330: Return DMA_PAUSED when transaction is pausedIlpo Järvinen1-2/+16
pl330_pause() does not set anything to indicate paused condition which causes pl330_tx_status() to return DMA_IN_PROGRESS. This breaks 8250 DMA flush after the fix in commit 57e9af7831dc ("serial: 8250_dma: Fix DMA Rx rearm race"). The function comment for pl330_pause() claims pause is supported but resume is not which is enough for 8250 DMA flush to work as long as DMA status reports DMA_PAUSED when appropriate. Add PAUSED state for descriptor and mark BUSY descriptors with PAUSED in pl330_pause(). Return DMA_PAUSED from pl330_tx_status() when the descriptor is PAUSED. Reported-by: Richard Tresidder <[email protected]> Tested-by: Richard Tresidder <[email protected]> Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature") Cc: [email protected] Link: https://lore.kernel.org/linux-serial/[email protected]/ Signed-off-by: Ilpo Järvinen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-08-07dmaengine: mcf-edma: Fix a potential un-allocated memory accessChristophe JAILLET1-6/+7
When 'mcf_edma' is allocated, some space is allocated for a flexible array at the end of the struct. 'chans' item are allocated, that is to say 'pdata->dma_channels'. Then, this number of item is stored in 'mcf_edma->n_chans'. A few lines later, if 'mcf_edma->n_chans' is 0, then a default value of 64 is set. This ends to no space allocated by devm_kzalloc() because chans was 0, but 64 items are read and/or written in some not allocated memory. Change the logic to define a default value before allocating the memory. Fixes: e7a3ff92eaf1 ("dmaengine: fsl-edma: add ColdFire mcf5441x edma support") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/f55d914407c900828f6fad3ea5fa791a5f17b9a4.1685172449.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul <[email protected]>
2023-08-06ionic: Add missing err handling for queue reconfigNitya Sunkad1-7/+16
ionic_start_queues_reconfig returns an error code if txrx_init fails. Handle this error code in the relevant places. This fixes a corner case where the device could get left in a detached state if the CMB reconfig fails and the attempt to clean up the mess also fails. Note that calling netif_device_attach when the netdev is already attached does not lead to unexpected behavior. Change goto name "errout" to "err_out" to maintain consistency across goto statements. Fixes: 40bc471dc714 ("ionic: add tx/rx-push support with device Component Memory Buffers") Fixes: 6f7d6f0fd7a3 ("ionic: pull reset_queues into tx_timeout handler") Signed-off-by: Nitya Sunkad <[email protected]> Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-06drivers: vxlan: vnifilter: free percpu vni stats on error pathFedor Pchelkin1-3/+8
In case rhashtable_lookup_insert_fast() fails inside vxlan_vni_add(), the allocated percpu vni stats are not freed on the error path. Introduce vxlan_vni_free() which would work as a nice wrapper to free vxlan_vni_node resources properly. Found by Linux Verification Center (linuxtesting.org). Fixes: 4095e0e1328a ("drivers: vxlan: vnifilter: per vni stats") Suggested-by: Ido Schimmel <[email protected]> Signed-off-by: Fedor Pchelkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-06hwmon: (pmbus/bel-pfe) Enable PMBUS_SKIP_STATUS_CHECK for pfe1100Tao Ren1-8/+8
Skip status check for both pfe1100 and pfe3000 because the communication error is also observed on pfe1100 devices. Signed-off-by: Tao Ren <[email protected]> Fixes: 626bb2f3fb3c hwmon: (pmbus) add driver for BEL PFE1100 and PFE3000 Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2023-08-06macsec: use DEV_STATS_INC()Eric Dumazet1-14/+14
syzbot/KCSAN reported data-races in macsec whenever dev->stats fields are updated. It appears all of these updates can happen from multiple cpus. Adopt SMP safe DEV_STATS_INC() to update dev->stats fields. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: Sabrina Dubroca <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-05Merge tag 'ata-6.5-rc5' of ↵Linus Torvalds2-3/+13
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fix from Damien Le Moal: - Prevent the scsi disk driver from issuing a START STOP UNIT command for ATA devices during system resume as this causes various issues reported by multiple users. * tag 'ata-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata,scsi: do not issue START STOP UNIT on resume
2023-08-05zram: take device and not only bvec offset into accountChristoph Hellwig1-12/+20
Commit af8b04c63708 ("zram: simplify bvec iteration in __zram_make_request") changed the bio iteration in zram to rely on the implicit capping to page boundaries in bio_for_each_segment. But it failed to care for the fact zram not only care about the page alignment of the bio payload, but also the page alignment into the device. For buffered I/O and swap those are the same, but for direct I/O or kernel internal I/O like XFS log buffer writes they can differ. Fix this by open coding bio_for_each_segment and limiting the bvec len so that it never crosses over a page alignment boundary in the device in addition to the payload boundary already taken care of by bio_iter_iovec. Cc: [email protected] Fixes: af8b04c63708 ("zram: simplify bvec iteration in __zram_make_request") Reported-by: Dusty Mabe <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Sergey Senozhatsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-08-05Merge tag 'parisc-for-6.5-rc5' of ↵Linus Torvalds2-31/+4
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - early fixmap preallocation to fix boot failures on kernel >= 6.4 - remove DMA leftover code in parport_gsc - drop old comments and code style fixes * tag 'parisc-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: unaligned: Add required spaces after ',' parport: gsc: remove DMA leftover code parisc: pci-dma: remove unused and dead EISA code and comment parisc/mm: preallocate fixmap page tables at init
2023-08-05Merge tag 'icc-6.5-rc5' of ↵Greg Kroah-Hartman5-0/+34
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-linus Georgi writes: interconnect fixes for v6.5-rc This contains a fix for a potential issue on some Qualcomm SoCs where bit-masks should have been used to configure the Bus Clock Manager hardware, instead of bandwidth units. - interconnect: qcom: Add support for mask-based BCMs - interconnect: qcom: sm8450: add enable_mask for bcm nodes - interconnect: qcom: sm8550: add enable_mask for bcm nodes - interconnect: qcom: sa8775p: add enable_mask for bcm nodes Signed-off-by: Georgi Djakov <[email protected]> * tag 'icc-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: sa8775p: add enable_mask for bcm nodes interconnect: qcom: sm8550: add enable_mask for bcm nodes interconnect: qcom: sm8450: add enable_mask for bcm nodes interconnect: qcom: Add support for mask-based BCMs
2023-08-04Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds4-3/+31
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A few clk driver fixes for some SoC clk drivers: - Change a usleep() to udelay() to avoid scheduling while atomic in the Amlogic PLL code - Revert a patch to the Mediatek MT8183 driver that caused an out-of-bounds write - Return the right error value when devm_of_iomap() fails in imx93_clocks_probe() - Constrain the Kconfig for the fixed mmio clk so that it depends on HAS_IOMEM and can't be compiled on architectures such as s390" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: fixed-mmio: make COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM clk: imx93: Propagate correct error in imx93_clocks_probe() clk: mediatek: mt8183: Add back SSPM related clocks clk: meson: change usleep_range() to udelay() for atomic context
2023-08-04Merge tag 'hyperv-fixes-signed-20230804' of ↵Linus Torvalds3-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix a bug in a python script for Hyper-V (Ani Sinha) - Workaround a bug in Hyper-V when IBT is enabled (Michael Kelley) - Fix an issue parsing MP table when Linux runs in VTL2 (Saurabh Sengar) - Several cleanup patches (Nischala Yelchuri, Kameron Carr, YueHaibing, ZhiHu) * tag 'hyperv-fixes-signed-20230804' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Remove unused extern declaration vmbus_ontimer() x86/hyperv: add noop functions to x86_init mpparse functions vmbus_testing: fix wrong python syntax for integer value comparison x86/hyperv: fix a warning in mshyperv.h x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction x86/hyperv: Improve code for referencing hyperv_pcpu_input_arg Drivers: hv: Change hv_free_hyperv_page() to take void * argument
2023-08-04Merge tag 'pm-6.5-rc5' of ↵Linus Torvalds4-48/+48
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a sparse warning triggered by the TPMI interface recently added to the Intel RAPL power capping driver (Zhang Rui)" * tag 'pm-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap: intel_rapl: Fix a sparse warning in TPMI interface
2023-08-04net: dsa: ocelot: call dsa_tag_8021q_unregister() under rtnl_lock() on ↵Vladimir Oltean1-0/+2
driver remove When the tagging protocol in current use is "ocelot-8021q" and we unbind the driver, we see this splat: $ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind mscc_felix 0000:00:00.5 swp0: left promiscuous mode sja1105 spi2.0: Link is Down DSA: tree 1 torn down mscc_felix 0000:00:00.5 swp2: left promiscuous mode sja1105 spi2.2: Link is Down DSA: tree 3 torn down fsl_enetc 0000:00:00.2 eno2: left promiscuous mode mscc_felix 0000:00:00.5: Link is Down ------------[ cut here ]------------ RTNL: assertion failed at net/dsa/tag_8021q.c (409) WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0 Modules linked in: CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771 pc : dsa_tag_8021q_unregister+0x12c/0x1a0 lr : dsa_tag_8021q_unregister+0x12c/0x1a0 Call trace: dsa_tag_8021q_unregister+0x12c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ RTNL: assertion failed at net/8021q/vlan_core.c (376) WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0 CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771 pc : vlan_vid_del+0x1b8/0x1f0 lr : vlan_vid_del+0x1b8/0x1f0 dsa_tag_8021q_unregister+0x8c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 DSA: tree 0 torn down This was somewhat not so easy to spot, because "ocelot-8021q" is not the default tagging protocol, and thus, not everyone who tests the unbinding path may have switched to it beforehand. The default felix_tag_npi_teardown() does not require rtnl_lock() to be held. Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-04Revert "PCI: mvebu: Mark driver as BROKEN"Bjorn Helgaas1-1/+0
b3574f579ece ("PCI: mvebu: Mark driver as BROKEN") made it impossible to enable the pci-mvebu driver. The driver does have known problems, but as Russell and Uwe reported, it does work in some configurations, so removing it broke some working setups. Revert b3574f579ece so pci-mvebu is available. Reported-by: Russell King (Oracle) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reported-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Helgaas <[email protected]>
2023-08-04Merge tag 'mtd/fixes-for-6.5-rc5' of ↵Linus Torvalds7-41/+45
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: "Raw NAND fixes: - fsl_upm: Fix an off-by one test in fun_exec_op() - Rockchip: - Align hwecc vs. raw page helper layouts - Fix oobfree offset and description - Meson: Fix OOB available bytes for ECC - Omap ELM: Fix incorrect type in assignment SPI-NOR fix: - Avoid holes in struct spi_mem_op Hyperbus fix: - Add Tudor as reviewer in MAINTAINERS SPI-NAND fixes: - Winbond and Toshiba: Fix ecc_get_status" * tag 'mtd/fixes-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op() mtd: spi-nor: avoid holes in struct spi_mem_op MAINTAINERS: Add myself as reviewer for HYPERBUS mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts mtd: rawnand: rockchip: fix oobfree offset and description mtd: rawnand: meson: fix OOB available bytes for ECC mtd: rawnand: omap_elm: Fix incorrect type in assignment mtd: spinand: winbond: Fix ecc_get_status mtd: spinand: toshiba: Fix ecc_get_status
2023-08-04Merge tag 'drm-fixes-2023-08-04' of git://anongit.freedesktop.org/drm/drmLinus Torvalds11-111/+203
Pull drm fixes from Dave Airlie: "Small set of fixes this week, i915 and a few misc ones. I didn't see an amd pull so maybe next week it'll have a few more on that driver. ttm: - NULL ptr deref fix panel: - add missing MODULE_DEVICE_TABLE imx/ipuv3: - timing fix i915: - Fix bug in getting msg length in AUX CH registers handler - Gen12 AUX invalidation fixes - Fix premature release of request's reusable memory" * tag 'drm-fixes-2023-08-04' of git://anongit.freedesktop.org/drm/drm: drm/panel: samsung-s6d7aa0: Add MODULE_DEVICE_TABLE drm/i915: Fix premature release of request's reusable memory drm/i915/gt: Support aux invalidation on all engines drm/i915/gt: Poll aux invalidation register bit on invalidation drm/i915/gt: Enable the CCS_FLUSH bit in the pipe control and in the CS drm/i915/gt: Rename flags with bit_group_X according to the datasheet drm/i915/gt: Ensure memory quiesced before invalidation drm/i915: Add the gen12_needs_ccs_aux_inv helper drm/i915/gt: Cleanup aux invalidation registers drm/i915/gvt: Fix bug in getting msg length in AUX CH registers handler drm/imx/ipuv3: Fix front porch adjustment upon hactive aligning drm/ttm: check null pointer before accessing when swapping
2023-08-04Merge tag 'ceph-for-6.5-rc5' of https://github.com/ceph/ceph-clientLinus Torvalds1-13/+15
Pull ceph fixes from Ilya Dryomov: "Two patches to improve RBD exclusive lock interaction with osd_request_timeout option and another fix to reduce the potential for erroneous blocklisting -- this time in CephFS. All going to stable" * tag 'ceph-for-6.5-rc5' of https://github.com/ceph/ceph-client: libceph: fix potential hang in ceph_osdc_notify() rbd: prevent busy loop when requesting exclusive lock ceph: defer stopping mdsc delayed_work
2023-08-04misc: tps6594-esm: Disable ESM for rev 1 PMICEsteban Blanc1-1/+18
Due to a silicon bug, ESM on TPS6594 PMIC revision 1 is not working properly. This patch keeps SOC ESM disabled for such PMIC. Fixes: 875fdd0787e4 ("misc: tps6594-esm: Add driver for TI TPS6594 ESM") Co-developed-by: Julien Panis <[email protected]> Signed-off-by: Julien Panis <[email protected]> Signed-off-by: Esteban Blanc <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-04misc: rtsx: judge ASPM Mode to set PETXCFG RegRicky WU6-58/+6
ASPM Mode is ASPM_MODE_CFG need to judge the value of clkreq_0 to set HIGH or LOW, if the ASPM Mode is ASPM_MODE_REG always set to HIGH during the initialization. Cc: [email protected] Signed-off-by: Ricky Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-04binder: fix memory leak in binder_init()Qi Zheng3-0/+8
In binder_init(), the destruction of binder_alloc_shrinker_init() is not performed in the wrong path, which will cause memory leaks. So this commit introduces binder_alloc_shrinker_exit() and calls it in the wrong path to fix that. Signed-off-by: Qi Zheng <[email protected]> Acked-by: Carlos Llamas <[email protected]> Fixes: f2517eb76f1f ("android: binder: Add global lru shrinker to binder") Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-04Merge tag 'iio-fixes-for-6.5a' of ↵Greg Kroah-Hartman9-33/+73
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus Jonathan writes: 1st set of IIO fixes for 6.5 Usual mixed bag of fixes for recently introduced issues and ones from way back that have recently been noticed. * core - Avoid a device with no parent issues seen on the dummy example device. * adi,ad71145 - Drop ref now that dt-schema supports -nanoamp. * adi,ad7192 - Fix wrong bit set for enabling AC excitation and exposure of control on devices without the feature. * adi,admv1013 - Don't ignore errors from regulator_get_voltage(). * amlogic,meson-adc - Make sure clocks enabled early enough. * google,cros_ec - Fix undersized cros_ec_command allocation that resulted in a buffer overrun. * rohm,bu27008 - Fix truncation issue with scale format that prevents smallest value being set - Report intensity as unsigned. Previously large values would be interpretted as negative intensities (and odd concept). * rohm,bu27034 - Fix truncation issue with scale format that prevents smallest value being set. * st,lsm6dsx - Return an error code, not false (which is 0 and hence success) to indicate ACPI mount matrix retrieval failed due to no ACPI support. * ti,ina2xx - Avoid a NULL pointer dereference if fall back compatible is used. * tag 'iio-fixes-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: cros_ec: Fix the allocation size for cros_ec_command iio: imu: lsm6dsx: Fix mount matrix retrieval iio: adc: meson: fix core clock enable/disable moment iio: core: Prevent invalid memory access when there is no parent iio: frequency: admv1013: propagate errors from regulator_get_voltage() dt-bindings: iio: adi,ad74115: remove ref from -nanoamp iio: adc: ina2xx: avoid NULL pointer dereference on OF device match iio: light: bu27008: Fix intensity data type iio: light: bu27008: Fix scale format iio: light: bu27034: Fix scale format iio: adc: ad7192: Fix ac excitation feature
2023-08-04thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request()Mika Westerberg1-0/+2
The memory allocated in tb_queue_dp_bandwidth_request() needs to be released once the request is handled to avoid leaking it. Fixes: 6ce3563520be ("thunderbolt: Add support for DisplayPort bandwidth allocation mode") Cc: [email protected] Signed-off-by: Mika Westerberg <[email protected]>
2023-08-04Merge tag 'counter-fixes-for-6.5a' of ↵Greg Kroah-Hartman1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-linus William writes: First set of Counter fixes for 6.5 In commit d428487471ba ("counter: i8254: Introduce the Intel 8254 interface library module"), the misplacement of the I8254 Kconfig entry results in the "Counter support" submenu items disappearing in menuconfig. A fix is provided to reposition the I8254 Kconfig entry to restore the intended submenu behavior. * tag 'counter-fixes-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter: counter: Fix menuconfig "Counter support" submenu entries disappearance
2023-08-04usb: dwc3: Properly handle processing of pending eventsElson Roy Serrao1-1/+8
If dwc3 is runtime suspended we defer processing the event buffer until resume, by setting the pending_events flag. Set this flag before triggering resume to avoid race with the runtime resume callback. While handling the pending events, in addition to checking the event buffer we also need to process it. Handle this by explicitly calling dwc3_thread_interrupt(). Also balance the runtime pm get() operation that triggered this processing. Cc: [email protected] Fixes: fc8bb91bc83e ("usb: dwc3: implement runtime PM") Signed-off-by: Elson Roy Serrao <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Reviewed-by: Roger Quadros <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-04usb-storage: alauda: Fix uninit-value in alauda_check_media()Alan Stern1-3/+9
Syzbot got KMSAN to complain about access to an uninitialized value in the alauda subdriver of usb-storage: BUG: KMSAN: uninit-value in alauda_transport+0x462/0x57f0 drivers/usb/storage/alauda.c:1137 CPU: 0 PID: 12279 Comm: usb-storage Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250 alauda_check_media+0x344/0x3310 drivers/usb/storage/alauda.c:460 The problem is that alauda_check_media() doesn't verify that its USB transfer succeeded before trying to use the received data. What should happen if the transfer fails isn't entirely clear, but a reasonably conservative approach is to pretend that no media is present. A similar problem exists in a usb_stor_dbg() call in alauda_get_media_status(). In this case, when an error occurs the call is redundant, because usb_stor_ctrl_transfer() already will print a debugging message. Finally, unrelated to the uninitialized memory access, is the fact that alauda_check_media() performs DMA to a buffer on the stack. Fortunately usb-storage provides a general purpose DMA-able buffer for uses like this. We'll use it instead. Reported-and-tested-by: [email protected] Closes: https://lore.kernel.org/all/[email protected]/T/ Suggested-by: Christophe JAILLET <[email protected]> Signed-off-by: Alan Stern <[email protected]> Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-04usb: common: usb-conn-gpio: Prevent bailing out if initial role is nonePrashanth K1-1/+5
Currently if we bootup a device without cable connected, then usb-conn-gpio won't call set_role() because last_role is same as current role. This happens since last_role gets initialised to zero during the probe. To avoid this, add a new flag initial_detection into struct usb_conn_info, which prevents bailing out during initial detection. Cc: <[email protected]> # 5.4 Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver") Signed-off-by: Prashanth K <[email protected]> Tested-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-08-04USB: Gadget: core: Help prevent panic during UVC unconfigureAlan Stern1-0/+9
Avichal Rakesh reported a kernel panic that occurred when the UVC gadget driver was removed from a gadget's configuration. The panic involves a somewhat complicated interaction between the kernel driver and a userspace component (as described in the Link tag below), but the analysis did make one thing clear: The Gadget core should accomodate gadget drivers calling usb_gadget_deactivate() as part of their unbind procedure. Currently this doesn't work. gadget_unbind_driver() calls driver->unbind() while holding the udc->connect_lock mutex, and usb_gadget_deactivate() attempts to acquire that mutex, which will result in a deadlock. The simple fix is for gadget_unbind_driver() to release the mutex when invoking the ->unbind() callback. There is no particular reason for it to be holding the mutex at that time, and the mutex isn't held while the ->bind() callback is invoked. So we'll drop the mutex before performing the unbind callback and reacquire it afterward. We'll also add a couple of comments to usb_gadget_activate() and usb_gadget_deactivate(). Because they run in process context they must not be called from a gadget driver's ->disconnect() callback, which (according to the kerneldoc for struct usb_gadget_driver in include/linux/usb/gadget.h) may run in interrupt context. This may help prevent similar bugs from arising in the future. Reported-and-tested-by: Avichal Rakesh <[email protected]> Signed-off-by: Alan Stern <[email protected]> Fixes: 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race") Link: https://lore.kernel.org/linux-usb/[email protected]/ Cc: Badhri Jagan Sridharan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.