aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-11-10net: hns3: remove check VF uc mac exist when set by PFGuangbin Huang1-36/+0
If users set unicast mac address for VFs by PF, they need to guarantee all VFs' address is different. This patch removes the check mac address exist of VFs, for usrs can refresh mac addresses of all VFs directly without need to modify the exist mac address to other value firstly. Fixes: 8e6de441b8e6 ("net: hns3: add support for configuring VF MAC from the host") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10net: hns3: fix some mac statistics is always 0 in device version V2Guangbin Huang2-1/+11
When driver queries the register number of mac statistics from firmware, the old firmware runs in device version V2 only returns number of valid registers, not include number of three reserved registers among of them. It cause driver doesn't record the last three data when query mac statistics. To fix this problem, driver never query register number in device version V2 and set it to a fixed value which include three reserved registers. Fixes: c8af2887c941 ("net: hns3: add support pause/pfc durations for mac statistics") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10net: hns3: fix kernel crash when unload VF while it is being resetYufeng Mo2-0/+7
When fully configure VLANs for a VF, then unload the VF while triggering a reset to PF, will cause a kernel crash because the irq is already uninit. [ 293.177579] ------------[ cut here ]------------ [ 293.183502] kernel BUG at drivers/pci/msi.c:352! [ 293.189547] Internal error: Oops - BUG: 0 [#1] SMP ...... [ 293.390124] Workqueue: hclgevf hclgevf_service_task [hclgevf] [ 293.402627] pstate: 80c00009 (Nzcv daif +PAN +UAO) [ 293.414324] pc : free_msi_irqs+0x19c/0x1b8 [ 293.425429] lr : free_msi_irqs+0x18c/0x1b8 [ 293.436545] sp : ffff00002716fbb0 [ 293.446950] x29: ffff00002716fbb0 x28: 0000000000000000 [ 293.459519] x27: 0000000000000000 x26: ffff45b91ea16b00 [ 293.472183] x25: 0000000000000000 x24: ffffa587b08f4700 [ 293.484717] x23: ffffc591ac30e000 x22: ffffa587b08f8428 [ 293.497190] x21: ffffc591ac30e300 x20: 0000000000000000 [ 293.509594] x19: ffffa58a062a8300 x18: 0000000000000000 [ 293.521949] x17: 0000000000000000 x16: ffff45b91dcc3f48 [ 293.534013] x15: 0000000000000000 x14: 0000000000000000 [ 293.545883] x13: 0000000000000040 x12: 0000000000000228 [ 293.557508] x11: 0000000000000020 x10: 0000000000000040 [ 293.568889] x9 : ffff45b91ea1e190 x8 : ffffc591802d0000 [ 293.580123] x7 : ffffc591802d0148 x6 : 0000000000000120 [ 293.591190] x5 : ffffc591802d0000 x4 : 0000000000000000 [ 293.602015] x3 : 0000000000000000 x2 : 0000000000000000 [ 293.612624] x1 : 00000000000004a4 x0 : ffffa58a1e0c6b80 [ 293.623028] Call trace: [ 293.630340] free_msi_irqs+0x19c/0x1b8 [ 293.638849] pci_disable_msix+0x118/0x140 [ 293.647452] pci_free_irq_vectors+0x20/0x38 [ 293.656081] hclgevf_uninit_msi+0x44/0x58 [hclgevf] [ 293.665309] hclgevf_reset_rebuild+0x1ac/0x2e0 [hclgevf] [ 293.674866] hclgevf_reset+0x358/0x400 [hclgevf] [ 293.683545] hclgevf_reset_service_task+0xd0/0x1b0 [hclgevf] [ 293.693325] hclgevf_service_task+0x4c/0x2e8 [hclgevf] [ 293.702307] process_one_work+0x1b0/0x448 [ 293.710034] worker_thread+0x54/0x468 [ 293.717331] kthread+0x134/0x138 [ 293.724114] ret_from_fork+0x10/0x18 [ 293.731324] Code: f940b000 b4ffff00 a903e7b8 f90017b6 (d4210000) This patch fixes the problem by waiting for the VF reset done while unloading the VF. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10net: hns3: sync rx ring head in echo common pullYufeng Mo5-0/+50
When the driver processes rx packets, the head pointer is updated only after the number of received packets reaches 16. However, hardware relies on the head pointer to calculate the number of FBDs. As a result, the hardware calculates the FBD incorrectly. Therefore, the driver proactively updates the head pointer in each common poll to ensure that the number of FBDs calculated by the hardware is correct. Fixes: 68752b24f51a ("net: hns3: schedule the polling again when allocation fails") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10net: hns3: fix pfc packet number incorrect after querying pfc parametersJie Wang5-50/+48
Currently, driver will send command to firmware to query pfc packet number when user uses dcb tool to get pfc parameters. However, the periodic service task will also periodically query and record MAC statistics, including pfc packet number. As the hardware registers of statistics is cleared after reading, it will cause pfc packet number of MAC statistics are not correct after using dcb tool to get pfc parameters. To fix this problem, when user uses dcb tool to get pfc parameters, driver updates MAC statistics firstly and then get pfc packet number from MAC statistics. Fixes: 64fd2300fcc1 ("net: hns3: add support for querying pfc puase packets statistic") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10net: hns3: fix ROCE base interrupt vector initialization bugJie Wang4-13/+2
Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use pci_irq_vector() to get interrupt vector, which adds the relative interrupt vector again and gets wrong interrupt vector. So fixes it by assign relative interrupt vector to ROCE instead of MSIX interrupt vector and delete the unused struct member base_msi_vector declaration of hclgevf_dev. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10net: hns3: fix failed to add reuse multicast mac addr to hardware when mc ↵Guangbin Huang1-23/+27
mac table is full Currently, when driver is failed to add a new multicast mac address to hardware due to the multicast mac table is full, it will directly return. In this case, if the multicast mac list has some reuse addresses after the new address, those reuse addresses will never be added to hardware. To fix this problem, if function hclge_add_mc_addr_common() returns -ENOSPC, hclge_sync_vport_mac_list() should judge whether continue or stop to add next address. As function hclge_sync_vport_mac_list() needs parameter mac_type to know whether is uc or mc, refine this function to add parameter mac_type and remove parameter sync. So does function hclge_unsync_vport_mac_list(). Fixes: ee4bcd3b7ae4 ("net: hns3: refactor the MAC address configure") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10Merge branch 'thermal-int340x'Rafael J. Wysocki3-15/+19
Merge int340x thermal driver fix for 5.16-rc1. * thermal-int340x: thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses
2021-11-10Merge branches 'pm-opp' and 'pm-cpufreq'Rafael J. Wysocki6-76/+154
Merge operating performance points (OPP) framework updates for and intel_pstate driver fixes for 5.16-rc1. * pm-opp: dt-bindings: opp: Allow multi-worded OPP entry name opp: Fix return in _opp_add_static_v2() PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate PM / devfreq: tegra30: Use resource-managed helpers PM / devfreq: Add devm_devfreq_add_governor() opp: Add more resource-managed variants of dev_pm_opp_of_add_table() opp: Change type of dev_pm_opp_attach_genpd(names) argument opp: Fix required-opps phandle array count check * pm-cpufreq: cpufreq: intel_pstate: Clear HWP Status during HWP Interrupt enable cpufreq: intel_pstate: Fix unchecked MSR 0x773 access cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offline
2021-11-10Merge branches 'acpica', 'acpi-ec', 'acpi-pmic' and 'acpi-video'Rafael J. Wysocki3-60/+80
Merge assorted fixes and cleanups and one new backlight quirk list item for 5.16-rc1. * acpica: ACPI: Drop ACPI_USE_BUILTIN_STDARG ifdef from acgcc.h * acpi-ec: ACPI: EC: Remove initialization of static variables to false ACPI: EC: Use ec_no_wakeup on HP ZHAN 66 Pro * acpi-pmic: ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses * acpi-video: ACPI: video: use platform backlight driver on Xiaomi Mi Pad 2 ACPI: video: Drop dmi_system_id.ident settings from video_detect_dmi_table[]
2021-11-10Merge branch 'acpi-dsc'Rafael J. Wysocki6-51/+115
Merge new ACPI device configuration object _DSC support for 5.16-rc1. * acpi-dsc: Documentation: ACPI: Fix non-D0 probe _DSC object example at24: Support probing while in non-zero ACPI D state media: i2c: imx319: Support device probe in non-zero ACPI D state ACPI: Add a convenience function to tell a device is in D0 state Documentation: ACPI: Document _DSC object usage for enum power state i2c: Allow an ACPI driver to manage the device's power state during probe ACPI: scan: Obtain device's desired enumeration power state
2021-11-09Input: iforce - fix control-message timeoutJohan Hovold1-1/+1
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 487358627825 ("Input: iforce - use DMA-safe buffer when getting IDs from USB") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20211025115501.5190-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: wacom_i2c - use macros for the bit masksAlistair Francis1-6/+16
To make the code easier to read use macros for the bit masks. Signed-off-by: Alistair Francis <alistair@alistair23.me> Link: https://lore.kernel.org/r/20211009113707.17568-2-alistair@alistair23.me Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: ili210x - reduce sample period to 15msMarek Vasut1-1/+1
Modern devices may redraw display at 60 Hz, make sure we have one input sample per one frame. Reduce sample period to 15ms, so we would get up to 66.6 samples per second, although realistically with all the jitter and extra scheduling wiggle room, we would end up just above 60 samples per second. This should be a good compromise between sampling too often and sampling too seldom. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108114145.84118-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: ili210x - improve polled sample spacingMarek Vasut1-2/+8
Currently the ili210x driver implements a threaded interrupt handler which starts upon edge on the interrupt line, and then polls the touch controller for samples. Every time a sample is obtained from the controller, the thread function checks whether further polling is required, and if so, waits fixed amount of time before polling for next sample. The delay between consecutive samples can thus vary greatly, because the I2C transfer required to retrieve the sample from the controller takes different amount of time on different platforms. Furthermore, different models of the touch controllers supported by this driver require different delays during retrieval of samples too. Instead of waiting fixed amount of time before polling for next sample, determine how much time passed since the beginning of sampling cycle and then wait only the remaining amount of time within the sampling cycle. This makes the driver deliver samples with equal spacing between them. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108005216.480525-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: ili210x - special case ili251x sample read outMarek Vasut1-5/+13
The ili251x touch controller needs 5ms delay between sending I2C device address and register address, and, writing or reading register data. According to downstream ili251x example code, this 5ms delay is not required when reading touch samples out of the controller. Implement such a special case. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20211108005259.480545-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09Input: elantench - fix misreporting trackpoint coordinatesPhoenix Huang1-0/+13
Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-11-09net: mana: Fix spelling mistake "calledd" -> "called"Colin Ian King1-1/+1
There is a spelling mistake in a dev_info message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Link: https://lore.kernel.org/r/20211108201817.43121-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09amt: use cancel_delayed_work() instead of flush_delayed_work() in amt_fini()Taehee Yoo1-1/+1
When the amt module is being removed, it calls flush_delayed_work() to exit source_gc_wq. But it wouldn't be exited properly because the amt_source_gc_work(), which is the callback function of source_gc_wq internally calls mod_delayed_work() again. So, amt_source_gc_work() would be called after the amt module is removed. Therefore kernel panic would occur. In order to avoid it, cancel_delayed_work() should be used instead of flush_delayed_work(). Test commands: modprobe amt modprobe -rv amt Splat looks like: BUG: unable to handle page fault for address: fffffbfff80f50db #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1237ee067 P4D 1237ee067 PUD 1237b2067 PMD 100c11067 PTE 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0+ #27 5a0ebebc29fe5c40c68bea90197606c3a832b09f RIP: 0010:run_timer_softirq+0x221/0xfc0 Code: 00 00 4c 89 e1 4c 8b 30 48 c1 e9 03 80 3c 29 00 0f 85 ed 0b 00 00 4d 89 34 24 4d 85 f6 74 19 49 8d 7e 08 48 89 f9 48 c1 e9 03 <80> 3c 29 00 0f 85 fa 0b 00 00 4d 89 66 08 83 04 24 01 49 89 d4 48 RSP: 0018:ffff888119009e50 EFLAGS: 00010806 RAX: ffff8881191f8a80 RBX: 00000000007ffe2a RCX: 1ffffffff80f50db RDX: ffff888119009ed0 RSI: 0000000000000008 RDI: ffffffffc07a86d8 RBP: dffffc0000000000 R08: ffff8881191f8280 R09: ffffed102323f061 R10: ffff8881191f8307 R11: ffffed102323f060 R12: ffff888119009ec8 R13: 00000000000000c0 R14: ffffffffc07a86d0 R15: ffff8881191f82e8 FS: 0000000000000000(0000) GS:ffff888119000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80f50db CR3: 00000001062dc002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ? add_timer+0x650/0x650 ? kvm_clock_read+0x14/0x30 ? ktime_get+0xb9/0x180 ? rcu_read_lock_held_common+0xe/0xa0 ? rcu_read_lock_sched_held+0x56/0xc0 ? rcu_read_lock_bh_held+0xa0/0xa0 ? hrtimer_interrupt+0x271/0x790 __do_softirq+0x1d0/0x88f irq_exit_rcu+0xe7/0x120 sysvec_apic_timer_interrupt+0x8a/0xb0 </IRQ> <TASK> [ ... ] Fixes: bc54e49c140b ("amt: add multicast(IGMP) report message handler") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20211108145340.17208-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-10Merge tag 'drm-intel-next-fixes-2021-11-09' of ↵Dave Airlie13-111/+148
git://anongit.freedesktop.org/drm/drm-intel into drm-next Couple Reverts, build fix, couple virtualization fixes, blank screen and other display rates fixes, and more. Four patches targeting stable in here. Display Fixes: - DP rates related fixes (Imre, Jani) - A Revert on disaling dual eDP that was causing state readout problems (Jani) - put the cdclk vtables in const data (Jani) - Fix DVO port type for moder platforms (Ville) - Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown (Ville) - CCS FBs related fixes (Imre) GT fixes: - Fix recursive lock in GuC submission (Matt Brost) - Revert guc_id from i915_request tracepoint (Joonas) - Build fix around dmabuf (Matt Auld) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YYsBif3HMi8GjLoU@intel.com
2021-11-10Merge tag 'drm-misc-next-fixes-2021-11-05' of ↵Dave Airlie1-6/+12
git://anongit.freedesktop.org/drm/drm-misc into drm-next A refcounting fix for outstanding fence callbacks. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20211105074318.oy6rwjr5wcw6qpjj@gilmour
2021-11-09net: dsa: mv88e6xxx: Don't support >1G speeds on 6191X on ports other than 10Marek Behún1-1/+4
Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are only 1G. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-10rtc: rx8025: use .set_offset/.read_offsetAlexandre Belloni1-37/+36
The driver has its own sysfs file to adjust the clock. Fortunately, it is already in pbb, however, the sign it expects is the opposite of what the RTC core does (which actually aligns with the RTC). Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-12-alexandre.belloni@bootlin.com
2021-11-10rtc: rx8025: use rtc_add_groupAlexandre Belloni1-18/+9
Remove open coded sysfs registration by using rtc_add_group. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-11-alexandre.belloni@bootlin.com
2021-11-10rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supportedAlexandre Belloni1-10/+2
Clear RTC_FEATURE_ALARM to signal alarms are not supported to the core instead of checking client->irq. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-10-alexandre.belloni@bootlin.com
2021-11-10rtc: rx8025: set rangeAlexandre Belloni1-3/+2
Set the RTC range, it is a classic BCD RTC, with 00 being a leap year. Let the core handle range checking. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-9-alexandre.belloni@bootlin.com
2021-11-10rtc: rx8025: let the core handle the alarm resolutionAlexandre Belloni1-13/+2
Tell the RTC core UIE are not supported because the resolution of the alarm is a minute. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-8-alexandre.belloni@bootlin.com
2021-11-10rtc: rx8025: switch to devm_rtc_allocate_deviceAlexandre Belloni1-5/+8
Switch to devm_rtc_allocate_device/devm_rtc_register_device, this allows for further improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-7-alexandre.belloni@bootlin.com
2021-11-10rtc: ab8500: let the core handle the alarm resolutionAlexandre Belloni1-19/+4
Tell the RTC core UIE are not supported because the resolution of the alarm is a minute. Note that this is in fact also fixing how the resolution is reported as the previous test was simply ensuring the alarm was more than a minute in the future while the register has a minute resolution. This would be ok if the alarm was a countdown but ab8500_rtc_read_alarm suggests otherwise and the AB8500 datasheet states that the RTC documentation is not public. Finally, the comment is wrong and what makes the UIE emulation work is uie_unsupported being set. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211107225458.111068-6-alexandre.belloni@bootlin.com
2021-11-10rtc: ab-eoz9: support UIE when availableAlexandre Belloni1-1/+2
The RTC actually supports UIE when an interrupt is available. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-5-alexandre.belloni@bootlin.com
2021-11-10rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPTAlexandre Belloni1-1/+1
Switch from uie_unsupported to RTC_FEATURE_UPDATE_INTERRUPT Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-4-alexandre.belloni@bootlin.com
2021-11-10rtc: rv3032: let the core handle the alarm resolutionAlexandre Belloni1-8/+1
Let the RTC core know the resolution of the alarm is a minute. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-3-alexandre.belloni@bootlin.com
2021-11-10rtc: s35390a: let the core handle the alarm resolutionAlexandre Belloni1-5/+2
Tell the RTC core UIE are not supported because the resolution of the alarm is a minute. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-2-alexandre.belloni@bootlin.com
2021-11-10rtc: handle alarms with a minute resolutionAlexandre Belloni1-1/+11
Handle alarms with a minute resolution in the core. Until now drivers have been open coding the seconds part removal and have been doing that wrongly. Most of them are rounding up which means the allow the system to miss deadlines. So, round down and let __rtc_set_alarm return immediately if the time has already passed. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225458.111068-1-alexandre.belloni@bootlin.com
2021-11-10rtc: pcf85063: silence cppcheck warningAlexandre Belloni1-1/+1
cppcheck warnings: (new ones prefixed by >>) >> drivers/rtc/rtc-pcf85063.c:292:40: warning: Clarify calculation precedence for '&' and '?'. [clarifyCalculation] status = status & PCF85063_REG_SC_OS ? RTC_VL_DATA_INVALID : 0; Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211107225349.110707-1-alexandre.belloni@bootlin.com
2021-11-10rtc: rv8803: fix writing back ctrl in flag registerDominique Martinet1-2/+2
ctrl is set from read_regs(..FLAG, 2, ctrl), so ctrl[0] is FLAG and ctrl[1] is the CTRL register. Use ctrl[0] to write back to the FLAG register as appropriate. Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20211101013400.325855-1-dominique.martinet@atmark-techno.com
2021-11-09drm/amd/display: Add callbacks for DMUB HPD IRQ notificationsNicholas Kazlauskas1-2/+15
[Why] We need HPD IRQ notifications (RX, short pulse) to properly handle DP MST for DPIA connections. [How] A null pointer exception currently occurs when these are received so add a check to validate that we have a handler installed for the notification. Extend the HPD handler to also handle HPD IRQ (RX) since the logic is the same. Fixes: e27c41d5b068 ("drm/amd/display: Support for DMUB HPD interrupt handling") Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Jude Shih <shenshih@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-09drm/amd/display: Don't lock connection_mutex for DMUB HPDNicholas Kazlauskas1-4/+0
[Why] Per DRM spec we only need to hold that lock when touching connector->state - which we do not do in that handler. Taking this locking introduces unnecessary dependencies with other threads which is bad for performance and opens up the potential for a deadlock since there are multiple locks being held at once. [How] Remove the connection_mutex lock/unlock routine and just iterate over the drm connectors normally. The iter helpers implicitly lock the connection list so this is safe to do. DC link access also does not need to be guarded since the link table is static at creation - we don't dynamically add or remove links, just streams. Fixes: e27c41d5b068 ("drm/amd/display: Support for DMUB HPD interrupt handling") Reviewed-by: Jude Shih <shenshih@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-09drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro endsAnson Jacob3-7/+9
Trivial patch which adds a comment for macro endif's in amdgpu_dm.c Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-09drm/amdkfd: Fix retry fault drain race conditionsFelix Kuehling2-5/+20
The check for whether to drain retry faults must be under the mmap write lock to serialize with munmap notifier callbacks. We were also missing checks on child ranges. To fix that, simplify the logic by using a flag rather than checking on each prange. That also allows draining less freqeuntly when many ranges are unmapped at once. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Tested-by: Philip Yang <Philip.Yang@amd.com> Tested-by: Alex Sierra <Alex.Sierra@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-09drm/amdkfd: lower the VAs base offset to 8KBAlex Sierra1-1/+1
The low 16MB of virtual address space are currently reserved for kernel mode allocations mapped into user virtual address space. This causes conflicts with HMM/SVM mappings at low virtual addresses. We tried to move those kernel mode allocations to the upper half of the 64-bit virtual address space for GFX9, which is naturally reserved for kernel use. However, TBA (trap handler code) has problems to access addresses in the high virtual space. We have decided to set this to 8KB of the lower address space as a temporary fix, while investigate TBA address problem. It is very unlikely for user space to map memory at this low region. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-09drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptlyShirish S1-1/+1
make action upon failure in "drm_atomic_add_affected_connectors()" consistent with the rest of failures in amdgpu_dm_atomic_check(). Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-09drm/amd/amdgpu: fix the kfd pre_reset sequence in sriovshaoyunl1-4/+1
The KFD pre_reset should be called before reset been executed, it will hold the lock to prevent other rocm process to sent the packlage to hiq during host execute the real reset on the HW Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-09drm/amdgpu: fix uvd crash on Polaris12 during driver unloadingEvan Quan1-11/+13
There was a change(below) target for such issue: d82e2c249c8f ("drm/amdgpu: Fix crash on device remove/driver unload") But the fix for VI ASICs was missing there. This is a supplement for that. Fixes: d82e2c249c8f ("drm/amdgpu: Fix crash on device remove/driver unload") Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-09Merge tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-blockLinus Torvalds19-100/+217
Pull more block driver updates from Jens Axboe: - Last series adding error handling support for add_disk() in drivers. After this one, and once the SCSI side has been merged, we can finally annotate add_disk() as must_check. (Luis) - bcache fixes (Coly) - zram fixes (Ming) - ataflop locking fix (Tetsuo) - nbd fixes (Ye, Yu) - MD merge via Song - Cleanup (Yang) - sysfs fix (Guoqing) - Misc fixes (Geert, Wu, luo) * tag 'for-5.16/drivers-2021-11-09' of git://git.kernel.dk/linux-block: (34 commits) bcache: Revert "bcache: use bvec_virt" ataflop: Add missing semicolon to return statement floppy: address add_disk() error handling on probe ataflop: address add_disk() error handling on probe block: update __register_blkdev() probe documentation ataflop: remove ataflop_probe_lock mutex mtd/ubi/block: add error handling support for add_disk() block/sunvdc: add error handling support for add_disk() z2ram: add error handling support for add_disk() nvdimm/pmem: use add_disk() error handling nvdimm/pmem: cleanup the disk if pmem_release_disk() is yet assigned nvdimm/blk: add error handling support for add_disk() nvdimm/blk: avoid calling del_gendisk() on early failures nvdimm/btt: add error handling support for add_disk() nvdimm/btt: use goto error labels on btt_blk_init() loop: Remove duplicate assignments drbd: Fix double free problem in drbd_create_device nvdimm/btt: do not call del_gendisk() if not needed bcache: fix use-after-free problem in bcache_device_free() zram: replace fsync_bdev with sync_blockdev ...
2021-11-09Merge tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-blockLinus Torvalds3-32/+44
Pull block fixes from Jens Axboe: - Set of fixes for the batched tag allocation (Ming, me) - add_disk() error handling fix (Luis) - Nested queue quiesce fixes (Ming) - Shared tags init error handling fix (Ye) - Misc cleanups (Jean, Ming, me) * tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block: nvme: wait until quiesce is done scsi: make sure that request queue queiesce and unquiesce balanced scsi: avoid to quiesce sdev->request_queue two times blk-mq: add one API for waiting until quiesce is done blk-mq: don't free tags if the tag_set is used by other device in queue initialztion block: fix device_add_disk() kobject_create_and_add() error handling block: ensure cached plug request matches the current queue block: move queue enter logic into blk_mq_submit_bio() block: make bio_queue_enter() fast-path available inline block: split request allocation components into helpers block: have plug stored requests hold references to the queue blk-mq: update hctx->nr_active in blk_mq_end_request_batch() blk-mq: add RQF_ELV debug entry blk-mq: only try to run plug merge if request has same queue with incoming bio block: move RQF_ELV setting into allocators dm: don't stop request queue after the dm device is suspended block: replace always false argument with 'false' block: assign correct tag before doing prefetch of request blk-mq: fix redundant check of !e expression
2021-11-09Merge tag 'for-5.16/dm-changes' of ↵Linus Torvalds13-31/+219
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Add DM core support for emitting audit events through the audit subsystem. Also enhance both the integrity and crypt targets to emit events to via dm-audit. - Various other simple code improvements and cleanups. * tag 'for-5.16/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm table: log table creation error code dm: make workqueue names device-specific dm writecache: Make use of the helper macro kthread_run() dm crypt: Make use of the helper macro kthread_run() dm verity: use bvec_kmap_local in verity_for_bv_block dm log writes: use memcpy_from_bvec in log_writes_map dm integrity: use bvec_kmap_local in __journal_read_write dm integrity: use bvec_kmap_local in integrity_metadata dm: add add_disk() error handling dm: Remove redundant flush_workqueue() calls dm crypt: log aead integrity violations to audit subsystem dm integrity: log audit events for dm-integrity target dm: introduce audit event module for device mapper
2021-11-09Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-112/+226
Merge more updates from Andrew Morton: "87 patches. Subsystems affected by this patch series: mm (pagecache and hugetlb), procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs, init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork, sysvfs, kcov, gdb, resource, selftests, and ipc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits) ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL ipc: check checkpoint_restore_ns_capable() to modify C/R proc files selftests/kselftest/runner/run_one(): allow running non-executable files virtio-mem: disallow mapping virtio-mem memory via /dev/mem kernel/resource: disallow access to exclusive system RAM regions kernel/resource: clean up and optimize iomem_is_exclusive() scripts/gdb: handle split debug for vmlinux kcov: replace local_irq_save() with a local_lock_t kcov: avoid enable+disable interrupts if !in_task() kcov: allocate per-CPU memory on the relevant node Documentation/kcov: define `ip' in the example Documentation/kcov: include types.h in the example sysv: use BUILD_BUG_ON instead of runtime check kernel/fork.c: unshare(): use swap() to make code cleaner seq_file: fix passing wrong private data seq_file: move seq_escape() to a header signal: remove duplicate include in signal.h crash_dump: remove duplicate include in crash_dump.h crash_dump: fix boolreturn.cocci warning hfs/hfsplus: use WARN_ON for sanity check ...
2021-11-09virtio-mem: disallow mapping virtio-mem memory via /dev/memDavid Hildenbrand2-1/+4
We don't want user space to be able to map virtio-mem device memory directly (e.g., via /dev/mem) in order to have guarantees that in a sane setup we'll never accidentially access unplugged memory within the device-managed region of a virtio-mem device, just as required by the virtio-spec. As soon as the virtio-mem driver is loaded, the device region is visible in /proc/iomem via the parent device region. From that point on user space is aware of the device region and we want to disallow mapping anything inside that region (where we will dynamically (un)plug memory) until the driver has been unloaded cleanly and e.g., another driver might take over. By creating our parent IORESOURCE_SYSTEM_RAM resource with IORESOURCE_EXCLUSIVE, we will disallow any /dev/mem access to our device region until the driver was unloaded cleanly and removed the parent region. This will work even though only some memory blocks are actually currently added to Linux and appear as busy in the resource tree. So access to the region from user space is only possible a) if we don't load the virtio-mem driver. b) after unloading the virtio-mem driver cleanly. Don't build virtio-mem if access to /dev/mem cannot be restricticted -- if we have CONFIG_DEVMEM=y but CONFIG_STRICT_DEVMEM is not set. Link: https://lkml.kernel.org/r/20210920142856.17758-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jason Wang <jasowang@redhat.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-09lib, stackdepot: add helper to print stack entries into bufferImran Khan4-27/+8
To print stack entries into a buffer, users of stackdepot, first get a list of stack entries using stack_depot_fetch and then print this list into a buffer using stack_trace_snprint. Provide a helper in stackdepot for this purpose. Also change above mentioned users to use this helper. [imran.f.khan@oracle.com: fix build error] Link: https://lkml.kernel.org/r/20210915175321.3472770-4-imran.f.khan@oracle.com [imran.f.khan@oracle.com: export stack_depot_snprint() to modules] Link: https://lkml.kernel.org/r/20210916133535.3592491-4-imran.f.khan@oracle.com Link: https://lkml.kernel.org/r/20210915014806.3206938-4-imran.f.khan@oracle.com Signed-off-by: Imran Khan <imran.f.khan@oracle.com> Suggested-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Jani Nikula <jani.nikula@intel.com> [i915] Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Powered by cgit, Gruvboxed by Blaster4385.