aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-03-21[media] dw2102: add support for Geniatech SU3000 USB DVB-S2 cardIgor M. Liplianin3-3/+325
The card uses ds3000 demod from Montage. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] dw2102: use separate firmwares for Prof 1100, TeVii S630, S660Igor M. Liplianin1-14/+58
Before this patch we can use only one card type from list due to sharing one firmware name. Now it's fixed. Also driver tries to attach only appropriate demod for this cards. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] dw2102: Extend keymap parameter for not used remoteIgor M. Liplianin1-2/+4
Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] TTUSB DVB: ttusb_boot_dsp() needs to release_firmware() or it leaks ↵Jesper Juhl1-0/+1
memory In drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c:ttusb_boot_dsp() we need to call release_firmware(fw) before returning or we'll leak - no matter if we succeed or fail. Signed-off-by: Jesper Juhl <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] pvrusb2: Use sysfs_attr_init() where appropriateMike Isely1-0/+9
Signed-off-by: Mike Isely <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] pvrusb2: Minor VBI tweak to help potential CC supportMike Isely1-0/+2
pvrusb2: Declare closed-caption setup for line 21 - this is needed for sliced VBI capture support. (However none of that works right now anyway.) Signed-off-by: Mike Isely <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] pvrusb2: width and height maximum valuesServaas Vandenberghe1-12/+16
pvrusb2: The origin of the capability bounds rectangle may differ from (left=0,top=0) so the calculation should use absolute coordinates, here below, or use relative coordinates like cropl_val-cap->bounds.left and cropt_val-cap->bounds.top. Signed-off-by: Mike Isely <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] pvrusb2: Fix a few missing default control values, for croppingMike Isely1-0/+2
Signed-off-by: Mike Isely <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] pvrusb2: Minor cosmetic code tweakMike Isely1-2/+1
Signed-off-by: Mike Isely <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] pvrusb2: Handle change of mode before handling change of video standardMike Isely1-12/+13
pvrusb2: Recognize and handle mode change before dealing with changes related to the video standard. Even though the video standard should only matter when in analog mode, doing this way is technically cleaner in case there's other stuff that might depend on both. Signed-off-by: Mike Isely <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] dvb_pll: DVB-S incorrect tune settings for dw2102/dm1105/cx88/opera1Malcolm Priestley1-11/+68
This tuner PLL has missing initialisation settings resulting in haphazard tuning. The PLL LPF was set to just 22000 symbol rate. Basically, the module is a Sharp BS2F7HZ0194 (STV0299+IX2410) I have had problems implementing the PLL in a new driver and did not want to break the IX2410 out of the PLL. This applies to DW2102, DM1105, CX88 and OPERA1 drivers. Signed-off-by: Malcolm Priestley <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] firedtv: drop obsolete backend abstractionStefan Richter5-190/+140
Since the drivers/ieee1394/ backend was removed from firedtv, its I/O no longer needs to be abstracted as exchangeable backend methods. Also, ieee1394 variants of module and device probe and removal are no longer there. Move module probe and removal into firedtv-fw.c where device probe and removal are implemented. Signed-off-by: Stefan Richter <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] video: sn9c102: world-wirtable sysfs filesVasiliy Kulikov1-3/+3
Don't allow everybody to change video settings. Signed-off-by: Vasiliy Kulikov <[email protected]> Acked-by: Mauro Carvalho Chehab <[email protected]> Acked-by: Luca Risolia <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] tm6000: add radio support to the driverDmitri Belimov6-101/+566
Changes: Add function tm6000_set_reg_mask for change some bits in regs. Very usefull, simplify some code with this function. Add control mute Add control volume Add control audio input MUX Add support radio Radio works well. TV works too Known bugs: The programm gnomeradio can't set freq for radio, it use old v4l API. Audio over USB works via arecord. The programm mplayer can set freq but no any audio mplayer -v -rawaudio rate=48000 radio://105.2/capture driver=v4l2:alsa:adevice=hw.1,0:amode=1:audiorate=48000:forceaudio:immediatemode=0 When start watch TV very shortly after radio the kernel crashed hardly. Didn't stop all USB URBs, need some time for stop. [[email protected]: fix merge conflicts] Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] tm6000: Add support for Terratec Grabster AV 150/250 MXHolger Nelson1-1/+8
This patch adds support for Terratec Grabster AV 150/250 MX. For now it is only possible to use composite input as switching inputs does not work. [[email protected]: Fix merge conflicts and simplify board entries] Signed-off-by: Holger Nelson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] tm6000: add new TV cards of BeholderDmitri Belimov1-0/+46
Add two new TV cards of Beholder. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] ds3000: don't load firmware during demod initIgor M. Liplianin1-8/+6
Speed up tuning, as firmware is not necessary to load every attempt to tune Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] ds3000: loading firmware in bigger chunksIgor M. Liplianin1-4/+4
Decrease firmware loading time. Before it is ~4000 i2c calls, now it is ~256 i2c calls to load ds3000 firmware. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] ds3000: decrease mpeg clock outputIgor M. Liplianin1-1/+1
TeVii s480 works fine with that on DVB-S2 channels Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] ds3000: fill in demod init functionIgor M. Liplianin1-4/+12
Make some initializations in init, not in tune function Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Add proper audio support for Nova-S Plus with wm8775 ADCLawrence Rust6-62/+258
This patch adds audio DMA capture and ALSA mixer elements for the line input jack of the Hauppauge Nova-S-plus DVB-S PCI card. The Nova-S-plus has a WM8775 ADC that is currently not detected. This patch enables this chip and exports volume, balance mute and ALC elements for ALSA mixer controls. [[email protected]: Changed the patch to only talk with wm8775 if board info says so. Also, added platform_data support, to avoid changing the behaviour for other boards, and fixed CodingStyle] [[email protected]: Changed patch to make the WM8775_GID defintion bridge driver private and let the bridge driver set the value of v4l2_subdev.grp_id.] -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Andy Walls <[email protected]>
2011-03-21[media] xc5000: add set_config and otherDmitri Belimov2-2/+37
Add one more radio input, usefull for tm6010 Add control output amplitude. Add set_config function for configure tuner when TV card hasn't dvb part. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] omap24xxcam: Fix compilationThomas Weber1-0/+1
Add linux/sched.h because of missing declaration of TASK_NORMAL. This patch fixes the following error: drivers/media/video/omap24xxcam.c: In function 'omap24xxcam_vbq_complete': drivers/media/video/omap24xxcam.c:415: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/media/video/omap24xxcam.c:415: error: (Each undeclared identifier is reported only once drivers/media/video/omap24xxcam.c:415: error: for each function it appears in.) Signed-off-by: Thomas Weber <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] video/saa7164: Fix sparse warning: Using plain integer as NULL pointerPeter Huewe9-37/+37
This patch fixes the warning "Using plain integer as NULL pointer", generated by sparse, by replacing if (var == 0) with if (!var) after an allocation and all other offending 0s with NULL. KernelVersion: linus' tree-1f0324c Signed-off-by: Peter Huewe <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] cx18: fix kernel oops when setting MPEG control before capturingHans Verkuil1-0/+1
The cxhdl->priv field was not set initially, only after capturing started. Signed-off-by: Hans Verkuil <[email protected]> Acked-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] cx23885, altera-ci: enable all PID's less than 0x20 in hardware PID ↵Igor M. Liplianin1-3/+5
filter It takes too long time to scan due to low symbol rate PID's like PAT, PMT, CAT, NIT. For that matter we enabled permanently all PID's less 0x20 in hardware PID filter for NetUP Dual DVB-T/C CI RF card to combine rates. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] cx23885: disable MSI for NetUP cards, otherwise CI is not workingIgor M. Liplianin2-0/+5
Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] cx23885: implement num_fds_portb, num_fds_portc parameters for ↵Igor M. Liplianin3-0/+9
cx23885_board structure This is needed for multifrontend support. NetUP Dual DVB-T/C CI RF card has frontends connected to port B & C Each frontend has two switchable cores - DVB-T & DVB-C Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] cx23885: implement tuner_bus parameter for cx23885_board structureIgor M. Liplianin4-5/+14
There is two external I2C buses in cx23885 chip. Currently, analog tuners supported for second I2C bus only In NetUP Dual DVB-T/C CI RF card tuners connected to first bus So, in order to support analog tuners sitting on first bus we need modifications. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Initial commit to support NetUP Dual DVB-T/C CI RF cardIgor M. Liplianin6-22/+286
The card based on cx23885 PCI-e brige. Altera FPGA for CI, multistandard demods stv0367 from STM for QAM & OFDM, Xcieve xc5000 tuners and additional cx25840 for second analog input. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] xc5000: add support for DVB-C tuningIgor M. Liplianin1-0/+18
Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Support for stv0367 multi-standard demodulatorIgor M. Liplianin6-0/+7341
The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Altera FPGA based CI driver moduleIgor M. Liplianin4-0/+942
An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Altera FPGA firmware download moduleIgor M. Liplianin10-0/+3919
It uses STAPL files and programs Altera FPGA through JTAG. Interface to JTAG must be provided from main device module, for example through cx23885 GPIO. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] video/cx231xx: Fix sparse warning: Using plain integer as NULL pointerPeter Huewe2-10/+10
This patch fixes the warning "Using plain integer as NULL pointer", generated by sparse, by replacing the offending 0s with NULL. Signed-off-by: Peter Huewe <[email protected]> Reviewed-by: Devin Heitmueller <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: Initial submit of OV9740 driverAndrew Chew3-0/+1016
This soc_camera driver is for Omnivision's OV9740 sensor. This initial submission provides support for YUV422 output at 1280x720 (720p), which is the sensor's native resolution. 640x480 (VGA) is also supported, with cropping and scaling performed by the sensor's ISP. This driver is heavily based off of the existing OV9640 driver. Signed-off-by: Andrew Chew <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4l: sh_mobile_ceu_camera: fix cropping offset calculationGuennadi Liakhovetski1-8/+4
Use the correct scales to calculate cropping offsets. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: mx3_camera: convert to videobuf2Guennadi Liakhovetski1-204/+141
Now that soc-camera supports videobuf API v1 and v2, camera-host drivers can be converted to videobuf2 individually. This patch converts the mx3_camera driver. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: sh_mobile_ceu_camera: convert to videobuf2Guennadi Liakhovetski2-154/+112
Convert the sh_mobile_ceu_camera driver to the videobuf2 API. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc-camera: extend to also support videobuf2Guennadi Liakhovetski2-17/+74
Extend soc-camera core to also support the videobuf2 API. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: add missing EXPORT_SYMBOL* statements to vb2Guennadi Liakhovetski1-0/+3
videobuf2-memops and videobuf2-core can be compiled as modules, in which case 3 more symbols from videobuf2-memops.c have to be exported. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: omap1_camera: join split format linesGuennadi Liakhovetski1-31/+31
Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: mx3_camera: fix capture issues for non 8-bit per pixel formatsAlberto Panizzo1-14/+50
If the camera was set to output formats like RGB565 YUYV or SBGGR10, the resulting image was scrambled due to erroneous interpretations of horizontal parameter's units. This patch in fourcc_to_ipu_pix, eliminate also the pixel formats mappings that, first are not used within mainline code and second, standing at the datasheets, they will not work properly: The IPU internal bus support only the following data formatting (44.1.1.3 Data Flows and Formats): 1 YUV 4:4:4 or RGB-8 bits per color component 2 YUV 4:4:4 or RGB-10 bits per color component 3 Generic data (from sensor to the system memory only) And format conversions are done: - from memory: unpacking from other formats to IPU supported ones - to memory: packing in the inverse order. So, assigning a packing/unpacking strategy to the IPU for those formats will produce a packing to memory and not the inverse. Signed-off-by: Alberto Panizzo <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: mx3_camera: correct 'sizeimage' value reportingAnatolij Gustschin1-0/+6
The 'pix->width' field may be updated in mx3_camera_set_fmt() to fulfill the IPU stride line alignment requirements. If this update takes place, the 'fmt.pix.sizeimage' field in the struct v4l2_format stucture returned by VIDIOC_S_FMT is wrong. We need to update the 'pix->sizeimage' field in the mx3_camera_set_fmt() function to fix this issue. Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: omap1_camera: fix use after freeMathias Krause1-2/+2
Even though clk_put() is a no-op on most architectures it is not for some ARM implementations. To not fail on those, release the clock timer before freeing the surrounding structure. This bug was spotted by the semantic patch tool coccinelle using the script found at scripts/coccinelle/free/kfree.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc_mediabus: add a method to obtain the number of samples per ↵Alberto Panizzo1-0/+14
pixel Add a function to calculate the number of samples on the media-bus, required to retrieve one pixel of a certain format. Signed-off-by: Alberto Panizzo <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc-camera: start stream after queueing the buffersAnatolij Gustschin1-2/+2
Some camera systems have strong requirement for capturing an exact number of frames after starting the stream and do not tolerate losing captured frames. By starting the stream after the videobuf has queued the buffers, we ensure that no frame will be lost. Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc-camera: add enum-frame-size ioctlQing Xu1-0/+37
add vidioc_enum_framesizes implementation, follow default_g_parm() and g_mbus_fmt() method Signed-off-by: Qing Xu <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] saa7134-empress: add missing MPEG controlsHans Verkuil1-0/+4
Reported by, and based on a patch from, Martin Dauskardt. The AUDIO_AC3_BITRATE control is still missing from this list, but such optional controls are a bit hard to handle. This will be fixed automatically when we switch to the control framework. Signed-off-by: Hans Verkuil <[email protected]> Reported-by: Martin Dauskardt <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] firedtv: remove obsolete ieee1394 backend codeHans Verkuil6-331/+3
drivers/ieee1394/ has been removed in Linux 2.6.37. The corresponding backend code in firedtv is no longer built in now and can be deleted. Firedtv continues to work with drivers/firewire/. Also, fix a Kconfig menu comment: Removal of CONFIG_IEEE1394 made the "Supported FireWire (IEEE 1394) Adapters" comment disappear; bring it back with corrected dependency. Signed-off-by: Hans Verkuil <[email protected]> Reviewed-by: Stefan Richter <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.