aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2019-11-08drm/amd/powerplay: correct Arcturus OD supportEvan Quan1-3/+5
OD is not supported on Arcturus. Thus the pp_od_clk_voltage sysfs interface is also not supported. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Kenneth Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-08drm/amdgpu: allow direct upload save restore list for raven2changzhu1-1/+3
It will cause modprobe atombios stuck problem in raven2 if it doesn't allow direct upload save restore list from gfx driver. So it needs to allow direct upload save restore list for raven2 temporarily. Signed-off-by: changzhu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-08Merge tag 'pm-5.4-rc7' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix an 'unchecked MSR access' warning in the intel_pstate cpufreq driver (Srinivas Pandruvada)" * tag 'pm-5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Fix invalid EPB setting
2019-11-08Merge tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds22-37/+159
Pull drm fixes from Dave Airlie: "Weekly fixes for drm: amdgpu has a few but they are pretty scattered fixes, the fbdev one is a build regression fix that we didn't want to risk leaving out, otherwise a couple of i915, one radeon and a core atomic fix. core: - add missing documentation for GEM shmem madvise helpers - Fix for a state dereference in atomic self-refresh helpers fbdev: - One compilation fix for c2p fbdev helpers amdgpu: - Fix navi14 display issue root cause and revert workaround - GPU reset scheduler interaction fix - Fix fan boost on multi-GPU - Gfx10 and sdma5 fixes for navi - GFXOFF fix for renoir - Add navi14 PCI ID - GPUVM fix for arcturus radeon: - Port an SI power fix from amdgpu i915: - Fix HPD poll to avoid kworker consuming a lot of cpu cycles. - Do not use TBT type for non Type-C ports" * tag 'drm-fixes-2019-11-08' of git://anongit.freedesktop.org/drm/drm: drm/radeon: fix si_enable_smc_cac() failed issue drm/amdgpu/renoir: move gfxoff handling into gfx9 module drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9 drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10 drm/amdgpu: register gpu instance before fan boost feature enablment drm/amd/swSMU: fix smu workload bit map error drm/shmem: Add docbook comments for drm_gem_shmem_object madvise fields drm/amdgpu: add navi14 PCI ID Revert "drm/amd/display: setting the DIG_MODE to the correct value." drm/amd/display: Add ENGINE_ID_DIGD condition check for Navi14 drm/amdgpu: dont schedule jobs while in reset drm/amdgpu/arcturus: properly set BANK_SELECT and FRAGMENT_SIZE drm/atomic: fix self-refresh helpers crtc state dereference drm/i915/dp: Do not switch aux to TBT mode for non-TC ports drm/i915: Avoid HPD poll detect triggering a new detect cycle fbdev: c2p: Fix link failure on non-inlining
2019-11-08Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds14-27/+82
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Fixes for various clk driver issues that happened because of code we merged this merge window. The Amlogic driver was missing some flags causing rates to be rounded improperly or clk_set_rate() to fail. The Samsung driver wasn't freeing everything on error paths and improperly saving/restoring PLL state across suspend/resume. The at91 driver was calling msleep() too early when scheduling hadn't started, so we put in place a quick solution until we can handle this sort of problem in the core framework. There were also problems with the Allwinner driver and operator precedence being incorrect causing subtle bugs. Finally, the TI driver was duplicating aliases and not delaying long enough leading to some unexpected timeouts" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: clkctrl: Fix failed to enable error with double udelay timeout clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18 clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup clk: ast2600: Fix enabling of clocks clk: at91: avoid sleeping early clk: imx8m: Use SYS_PLL1_800M as intermediate parent of CLK_ARM clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume clk: samsung: exynos542x: Move G3D subsystem clocks to its sub-CMU clk: samsung: exynos5433: Fix error paths clk: at91: sam9x60: fix programmable clock clk: meson: g12a: set CLK_MUX_ROUND_CLOSEST on the cpu clock muxes clk: meson: g12a: fix cpu clock rate setting clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate
2019-11-08block: drbd: remove a stray unlock in __drbd_send_protocol()Dan Carpenter1-1/+0
There are two callers of this function and they both unlock the mutex so this ends up being a double unlock. Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-11-08cpufreq: intel_pstate: Fix invalid EPB settingSrinivas Pandruvada1-3/+1
The max value of EPB can only be 0x0F. Attempting to set more than that triggers an "unchecked MSR access error" warning which happens in intel_pstate_hwp_force_min_perf() called via cpufreq stop_cpu(). However, it is not even necessary to touch the EPB from intel_pstate, because it is restored on every CPU online by the intel_epb.c code, so let that code do the right thing and drop the redundant (and incorrect) EPB update from intel_pstate. Fixes: af3b7379e2d70 ("cpufreq: intel_pstate: Force HWP min perf before offline") Reported-by: Qian Cai <[email protected]> Cc: 5.2+ <[email protected]> # 5.2+ Signed-off-by: Srinivas Pandruvada <[email protected]> [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2019-11-08Merge tag 'drm-misc-next-fixes-2019-11-06' of ↵Dave Airlie2-14/+14
git://anongit.freedesktop.org/drm/drm-misc into drm-next msm: Fix up a6xx debugbus register names (Sharat) mst: Avoid u64 division (Sean) Cc: Sharat Masetty <[email protected]> Cc: Sean Paul <[email protected]> Signed-off-by: Dave Airlie <[email protected]> From: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20191106202730.GA199896@art_vandelay
2019-11-08Merge tag 'drm-intel-next-fixes-2019-11-07' of ↵Dave Airlie14-118/+118
git://anongit.freedesktop.org/drm/drm-intel into drm-next One RCU fix and fix for suspend GEM_BUG_ON (with dependencies). Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-11-08Merge tag 'mediatek-drm-next-5.5-2' of ↵Dave Airlie6-42/+205
https://github.com/ckhu-mediatek/linux.git-tags into drm-next Mediatek DRM next for Linux 5.5 - 2 Signed-off-by: Dave Airlie <[email protected]> From: CK Hu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1573093419.13645.5.camel@mtksdaap41
2019-11-08drm/i915/gvt: Stop initializing pvinfo through reading mmioTina Zhang1-0/+4
The region of pvinfo is reserved for communication between a VMM and the GPU driver executing on a virtual machine. HW doesn't have any backing mmio store support for the pvinfo region, thus accessing to this range through MMIO read/write from host side is forbidden which is regarded as unclaimed register access. This patch leaves pvinfo range be initialized with zero. Signed-off-by: Tina Zhang <[email protected]> Reviewed-by: Zhenyu Wang <[email protected]> Signed-off-by: Zhenyu Wang <[email protected]>
2019-11-08Merge tag 'drm-fixes-5.4-2019-11-06' of ↵Dave Airlie16-24/+106
git://people.freedesktop.org/~agd5f/linux into drm-fixes drm-fixes-5.4-2019-11-06: amdgpu: - Fix navi14 display issue root cause and revert workaround - GPU reset scheduler interaction fix - Fix fan boost on multi-GPU - Gfx10 and sdma5 fixes for navi - GFXOFF fix for renoir - Add navi14 PCI ID - GPUVM fix for arcturus radeon: - Port an SI power fix from amdgpu Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-11-08Merge tag 'drm-intel-fixes-2019-11-06' of ↵Dave Airlie3-1/+24
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix HPD poll to avoid kworker consuming a lot of cpu cycles. - Do not use TBT type for non Type-C ports. Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-11-08Merge tag 'drm-misc-fixes-2019-11-07-1' of ↵Dave Airlie3-12/+29
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - Some new documentation for GEM shmem madvise helpers - Fix for a state dereference in atomic self-refresh helpers - One compilation fix for c2p fbdev helpers Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-11-07net: hns: Fix the stray netpoll locks causing deadlock in NAPI pathSalil Mehta3-25/+1
This patch fixes the problem of the spin locks, originally meant for the netpoll path of hns driver, causing deadlock in the normal NAPI poll path. The issue happened due to the presence of the stray leftover spin lock code related to the netpoll, whose support was earlier removed from the HNS[1], got activated due to enabling of NET_POLL_CONTROLLER switch. Earlier background: The netpoll handling code originally had this bug(as identified by Marc Zyngier[2]) of wrong spin lock API being used which did not disable the interrupts and hence could cause locking issues. i.e. if the lock were first acquired in context to thread like 'ip' util and this lock if ever got later acquired again in context to the interrupt context like TX/RX (Interrupts could always pre-empt the lock holding task and acquire the lock again) and hence could cause deadlock. Proposed Solution: 1. If the netpoll was enabled in the HNS driver, which is not right now, we could have simply used spin_[un]lock_irqsave() 2. But as netpoll is disabled, therefore, it is best to get rid of the existing locks and stray code for now. This should solve the problem reported by Marc. [1] https://git.kernel.org/torvalds/c/4bd2c03be7 [2] https://patchwork.ozlabs.org/patch/1189139/ Fixes: 4bd2c03be707 ("net: hns: remove ndo_poll_controller") Cc: lipeng <[email protected]> Cc: Yisen Zhuang <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: David S. Miller <[email protected]> Reported-by: Marc Zyngier <[email protected]> Acked-by: Marc Zyngier <[email protected]> Tested-by: Marc Zyngier <[email protected]> Signed-off-by: Salil Mehta <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-07net: usb: qmi_wwan: add support for DW5821e with eSIM supportAleksander Morgado1-0/+1
Exactly same layout as the default DW5821e module, just a different vid/pid. The QMI interface is exposed in USB configuration #1: P: Vendor=413c ProdID=81e0 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5821e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option Signed-off-by: Aleksander Morgado <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-07CDC-NCM: handle incomplete transfer of MTUOliver Neukum1-3/+3
A malicious device may give half an answer when asked for its MTU. The driver will proceed after this with a garbage MTU. Anything but a complete answer must be treated as an error. V2: used sizeof as request by Alexander Reported-and-tested-by: [email protected] Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-07drm/amdgpu: Avoid accidental thread reactivation.Andrey Grodzovsky1-0/+10
Problem: During GPU reset we call the GPU scheduler to suspend it's thread, those two functions in amdgpu also suspend and resume the sceduler for their needs but this can collide with GPU reset in progress and accidently restart a suspended thread before time. Fix: Serialize with GPU reset. Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-07drm/sched: Avoid job cleanup if sched thread is parked.Andrey Grodzovsky1-3/+7
When the sched thread is parked we assume ring_mirror_list is not accessed from here. Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-07Revert "drm/amdgpu: dont schedule jobs while in reset"Andrey Grodzovsky1-4/+1
This reverts commit 89b3d86403f1025f6b430d8f9ffc590efbadce62. We will do a proper fix in next patch. Signed-off-by: Andrey Grodzovsky <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-07drm/sched: Use completion to wait for sched->thread idle v2.Andrey Grodzovsky2-4/+14
Removes thread park/unpark hack from drm_sched_entity_fini and by this fixes reactivation of scheduler thread while the thread is supposed to be stopped. v2: Per sched entity completion. Signed-off-by: Andrey Grodzovsky <[email protected]> Suggested-by: Christian König <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-07drm/amdgpu: fix vega20 pstate status changeJonathan Kim1-3/+4
vega20 only requires all devices be set to same pstate level for low pstate and not high. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-07drm/amdgpu: fix sysfs interface pcie_replay_count error on navi asicKevin Wang1-0/+11
the asic callback function of get_pcie_replay_count is not implement on navi asic, it will cause null pinter error when read this interface. Signed-off-by: Kevin Wang <[email protected]> Reviewed-by: Kent Russell <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-07drm/amdgpu: Need to disable msix when unloading driverEmily Deng1-1/+1
For driver reload test, it will report "can't enable MSI (MSI-X already enabled)". Signed-off-by: Emily Deng <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-07drm/amdgpu: Add comments to gmc structureOak Zeng1-0/+30
Explain fields like aper_base, agp_start etc. The definition of those fields are confusing as they are from different view (CPU or GPU). Add comments for easier understand. Signed-off-by: Oak Zeng <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-07Merge branch 'for-linus' of ↵Linus Torvalds3-4/+25
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: "Two fixes for the HID subsystem: - regression fix for i2c-hid power management (Hans de Goede) - signed vs unsigned API fix for Wacom driver (Jason Gerecke)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: generic: Treat serial number and related fields as unsigned HID: i2c-hid: Send power-on command after reset
2019-11-07staging: Fix error return code in vboxsf_fill_super()Wei Yongjun1-1/+3
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: df4028658f9d ("staging: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by: Wei Yongjun <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-11-07staging: vboxsf: fix dereference of pointer dentry before it is null checkedColin Ian King1-1/+2
Currently the pointer dentry is being dereferenced before it is being null checked. Fix this by only dereferencing dentry once we know it is not null. Addresses-Coverity: ("Dereference before null check") Fixes: df4028658f9d ("staging: Add VirtualBox guest shared folder (vboxsf) support") Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-11-07staging: vboxsf: Remove unused including <linux/version.h>YueHaibing1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-11-07pinctrl: stmfx: fix valid_mask init sequenceAmelie Delaunay1-14/+0
With stmfx_pinctrl_gpio_init_valid_mask callback, gpio_valid_mask was used to initialize gpiochip valid_mask for gpiolib. But gpio_valid_mask was not yet initialized. gpio_valid_mask required gpio-ranges to be registered, this is the case after gpiochip_add_data call. But init_valid_mask callback is also called under gpiochip_add_data. gpio_valid_mask initialization cannot be moved before gpiochip_add_data because gpio-ranges are not registered. So, it is not possible to use init_valid_mask callback. To avoid this issue, get rid of valid_mask and rely on ranges. Fixes: da9b142ab2c5 ("pinctrl: stmfx: Use the callback to populate valid_mask") Signed-off-by: Amelie Delaunay <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2019-11-06NFC: st21nfca: fix double freePan Bian1-0/+1
The variable nfcid_skb is not changed in the callee nfc_hci_get_param() if error occurs. Consequently, the freed variable nfcid_skb will be freed again, resulting in a double free bug. Set nfcid_skb to NULL after releasing it to fix the bug. Signed-off-by: Pan Bian <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: hns3: add compatible handling for command HCLGE_OPC_PF_RST_DONEHuazhong Tan1-1/+17
Since old firmware does not support HCLGE_OPC_PF_RST_DONE, it will return -EOPNOTSUPP to the driver when received this command. So for this case, it should just print a warning and return success to the caller. Fixes: 72e2fb07997c ("net: hns3: clear reset interrupt status in hclge_irq_handle()") Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06Merge tag 'mlx5-fixes-2019-11-06' of ↵David S. Miller4-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahamees says: ==================== Mellanox, mlx5 fixes 2019-11-06 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. No -stable this time. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-11-06r8169: fix page read in r8168g_mdio_readHeiner Kallweit1-0/+3
Functions like phy_modify_paged() read the current page, on Realtek PHY's this means reading the value of register 0x1f. Add special handling for reading this register, similar to what we do already in r8168g_mdio_write(). Currently we read a random value that by chance seems to be 0 always. Fixes: a2928d28643e ("r8169: use paged versions of phylib MDIO access functions") Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: Fix the TX IOC in xmit pathJose Abreu1-30/+34
IOC bit must be only set in the last descriptor. Move the logic up a little bit to make sure it's set in the correct descriptor. Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: Fix TSO descriptor with Enhanced AddressingJose Abreu1-0/+1
When using addressing > 32 bits the TSO first descriptor only has the header so we can't set the payload field for this descriptor. Let's reset the variable so that buffer 2 value is zero. Fixes: a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: Fix the packet count in stmmac_rx()Jose Abreu1-2/+3
Currently, stmmac_rx() is counting the number of descriptors but it should count the number of packets as specified by the NAPI limit. Fix this. Fixes: ec222003bd94 ("net: stmmac: Prepare to add Split Header support") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: xgmac: Disable MMC interrupts by defaultJose Abreu1-2/+4
MMC interrupts were being enabled, which is not what we want because it will lead to a storm of interrupts that are not handled at all. Fix it by disabling all MMC interrupts for XGMAC. Fixes: b6cdf09f51c2 ("net: stmmac: xgmac: Implement MMC counters") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: xgmac: Disable Flow Control when 1 or more queues are in AVJose Abreu1-0/+2
When in AVB mode we need to disable flow control to prevent MAC from pausing in TX side. Fixes: ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: xgmac: Fix AV Feature detectionJose Abreu1-1/+1
Fix incorrect precedence of operators. For reference: AV implies AV Feature but RAV implies only RX side AV Feature. As we want full AV features we need to check RAV. Fixes: c2b69474d63b ("net: stmmac: xgmac: Correct RAVSEL field interpretation") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: xgmac: Fix TSA selectionJose Abreu1-0/+1
When we change between Transmission Scheduling Algorithms, we need to clear previous values so that the new chosen algorithm is correctly selected. Fixes: ec6ea8e3eee9 ("net: stmmac: Add CBS support in XGMAC2") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: xgmac: Only get SPH header len if availableJose Abreu1-1/+2
Split Header length is only available when L34T == 0. Fix this by correctly checking if L34T is zero before trying to get Header length. Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: selftests: Prevent false positives in filter testsJose Abreu1-40/+94
In L2 tests that filter packets by destination MAC address we need to prevent false positives that can occur if we add an address that collides with the existing ones. To fix this, lets manually check if the new address to be added is already present in the NIC and use a different one if so. For Hash filtering this also envolves converting the address to the hash. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: xgmac: bitrev32 returns u32Jose Abreu1-1/+1
The bitrev32 function returns an u32 var, not an int. Fix it. Fixes: 0efedbf11f07 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: stmmac: gmac4: bitrev32 returns u32Jose Abreu1-1/+1
The bitrev32 function returns an u32 var, not an int. Fix it. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06drm/radeon: fix si_enable_smc_cac() failed issueAlex Deucher1-0/+1
Need to set the dte flag on this asic. Port the fix from amdgpu: 5cb818b861be114 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue") Reviewed-by: Yong Zhao <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-11-06drm/amdgpu/renoir: move gfxoff handling into gfx9 moduleAlex Deucher2-5/+6
To properly handle the option parsing ordering. Reviewed-by: Yong Zhao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-06drm/amdgpu: add warning for GRBM 1-cycle delay issue in gfx9changzhu1-0/+7
It needs to add warning to update firmware in gfx9 in case that firmware is too old to have function to realize dummy read in cp firmware. Signed-off-by: changzhu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-06drm/amdgpu: add dummy read by engines for some GCVM status registers in gfx10changzhu4-6/+64
The GRBM register interface is now capable of bursting 1 cycle per register wr->wr, wr->rd much faster than previous muticycle per transaction done interface. This has caused a problem where status registers requiring HW to update have a 1 cycle delay, due to the register update having to go through GRBM. For cp ucode, it has realized dummy read in cp firmware.It covers the use of WAIT_REG_MEM operation 1 case only.So it needs to call gfx_v10_0_wait_reg_mem in gfx10. Besides it also needs to add warning to update firmware in case firmware is too old to have function to realize dummy read in cp firmware. For sdma ucode, it hasn't realized dummy read in sdma firmware. sdma is moved to gfxhub in gfx10. So it needs to add dummy read in driver between amdgpu_ring_emit_wreg and amdgpu_ring_emit_reg_wait for sdma_v5_0. Signed-off-by: changzhu <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-11-06drm/amdgpu: register gpu instance before fan boost feature enablmentEvan Quan2-1/+7
Otherwise, the feature enablement will be skipped due to wrong count. Fixes: beff74bc6e0fa91 ("drm/amdgpu: fix a race in GPU reset with IB test (v2)") Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.