| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In commit 8930a6c20791 ("scsi: core: add support for request batching") the
block layer bd->last flag was mapped to SCMD_LAST and used as an indicator
to send the batch for the drivers that implement this feature. However, the
error handling code was not updated accordingly.
scsi_send_eh_cmnd() is used to send error handling commands and request
sense. The problem is that request sense comes as a single command that
gets into the batch queue and times out. As a result the device goes
offline after several failed resets. This was observed on virtio_scsi
during a device resize operation.
[ 496.316946] sd 0:0:4:0: [sdd] tag#117 scsi_eh_0: requesting sense
[ 506.786356] sd 0:0:4:0: [sdd] tag#117 scsi_send_eh_cmnd timeleft: 0
[ 506.787981] sd 0:0:4:0: [sdd] tag#117 abort
To fix this always set SCMD_LAST flag in scsi_send_eh_cmnd() and
scsi_reset_ioctl().
Fixes: 8930a6c20791 ("scsi: core: add support for request batching")
Cc: <[email protected]>
Signed-off-by: Alexander Atanasov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
skb_share_check() already drops the reference to the skb when returning
NULL. Using kfree_skb() in the error handling path leads to an skb double
free.
Fix this by removing the variable tmp_skb, and return directly when
skb_share_check() returns NULL.
Fixes: 01a4cc4d0cd6 ("bnx2fc: do not add shared skbs to the fcoe_rx_list")
Signed-off-by: Wei Yongjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
OPP support added by commit 72208ebe181e ("scsi: ufs: core: Add support for
parsing OPP") doesn't update the min_freq and max_freq of each clock in
'struct ufs_clk_info'.
But these values are used by the host drivers internally for controller
configuration. When the OPP support is enabled in devicetree, these values
will be 0, causing boot issues on the respective platforms.
So add support to parse the min_freq and max_freq of all clocks while
parsing the OPP table.
Fixes: 72208ebe181e ("scsi: ufs: core: Add support for parsing OPP")
Co-developed-by: Manish Pandey <[email protected]>
Signed-off-by: Manish Pandey <[email protected]>
Signed-off-by: Nitin Rawat <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
This reverts commit 9dc704dcc09eae7d21b5da0615eb2ed79278f63e.
Several reports have been made indicating that this commit caused
hangs. Numerous attempts at root causing and fixing the issue have
been unsuccessful so let's revert for now.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217599
Cc: <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When an error occurs in the for loop of beiscsi_init_wrb_handle(), we
should free phwi_ctxt->be_wrbq before returning an error code to prevent
potential memleak.
Fixes: a7909b396ba7 ("[SCSI] be2iscsi: Fix dynamic CID allocation Mechanism in driver")
Signed-off-by: Dinghao Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
It is not always possible to keep a device in the runtime suspended state
when a system level suspend/resume cycle is executed. E.g. for ATA devices
connected to AHCI adapters, system resume resets the ATA ports, which
causes connected devices to spin up. In such case, a runtime suspended disk
will incorrectly be seen with a suspended runtime state because the device
is not resumed by sd_resume_system(). The power state seen by the user is
different than the actual device physical power state.
Fix this issue by introducing the struct scsi_device flag
force_runtime_start_on_system_start. When set, this flag causes
sd_resume_system() to request a runtime resume operation for runtime
suspended devices. This results in the user seeing the device runtime_state
as active after a system resume, thus correctly reflecting the device
physical power state.
Fixes: 9131bff6a9f1 ("scsi: core: pm: Only runtime resume if necessary")
Cc: <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
management") changed the single bit manage_start_stop flag into 2 boolean
fields of the SCSI device structure. Commit 24eca2dce0f8 ("scsi: sd:
Introduce manage_shutdown device flag") introduced the manage_shutdown
boolean field for the same structure. Together, these 2 commits increase
the size of struct scsi_device by 8 bytes by using booleans instead of
defining the manage_xxx fields as single bit flags, similarly to other
flags of this structure.
Avoid this unnecessary structure size increase and be consistent with the
definition of other flags by reverting the definitions of the manage_xxx
fields as single bit flags.
Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management")
Fixes: 24eca2dce0f8 ("scsi: sd: Introduce manage_shutdown device flag")
Cc: <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Niklas Cassel <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
In MCQ mode, if cmd is pending in device and abort succeeds, response will
not be returned by device. So we need clear the cmd, otherwise timeout will
happen and next time we use same tag we will get a WARN_ON(lrbp->cmd).
Below is error log:
<3>[ 2277.447611][T21376] ufshcd-mtk 112b0000.ufshci: ufshcd_try_to_abort_task: cmd pending in the device. tag = 7
<3>[ 2277.476954][T21376] ufshcd-mtk 112b0000.ufshci: Aborting tag 7 / CDB 0x2a succeeded
<6>[ 2307.551263][T30974] ufshcd-mtk 112b0000.ufshci: ufshcd_abort: Device abort task at tag 7
<4>[ 2307.623264][ T327] WARNING: CPU: 5 PID: 327 at source/drivers/ufs/core/ufshcd.c:3021 ufshcd_queuecommand+0x66c/0xe34
Fixes: ab248643d3d6 ("scsi: ufs: core: Add error handling for MCQ mode")
Cc: <[email protected]>
Signed-off-by: Peter Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Pull in queued fixes for 6.7
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Link: https://lore.kernel.org/regressions/[email protected]/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <[email protected]>
Tested-by: Damian Tometzki <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in
omapfb, amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
fbdev: fsl-diu-fb: mark wr_reg_wa() static
fbdev: amifb: Convert to platform remove callback returning void
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
fbdev: hyperv_fb: fix uninitialized local variable use
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
fbdev: omapfb/opa362: Convert to platform remove callback returning void
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
fbdev: omapfb/dvi: Convert to platform remove callback returning void
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
fbdev: omapfb/dpi: Convert to platform remove callback returning void
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
...
|
|
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.7-2023-11-10:
amdgpu:
- SR-IOV fixes
- DMCUB fixes
- DCN3.5 fixes
- DP2 fixes
- SubVP fixes
- SMU14 fixes
- SDMA4.x fixes
- Suspend/resume fixes
- AGP regression fix
- UAF fixes for some error cases
- SMU 13.0.6 fixes
- Documentation fixes
- RAS fixes
- Hotplug fixes
- Scheduling entity ordering fix
- GPUVM fixes
Signed-off-by: Daniel Vetter <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: one Kconfig
dependency fix and another fix for a long standing issue where a sync
transfer races with system suspend"
* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix null dereference on suspend
spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
|
|
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix broken cache-flush support for Micron eMMCs
- Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'
MMC host:
- sdhci_am654: Fix TAP value parsing for legacy speed mode
- sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
- vub300: Fix an error path in probe"
* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
mmc: vub300: fix an error code
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
mmc: sdhci_am654: fix start loop index for TAP value parsing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"This contains two very small fixes that I failed to include in the
main pull request"
* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix double shift bug
pwm: samsung: Fix a bit test in pwm_samsung_resume()
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- nvme keyring config compile fixes (Hannes and Arnd)
- fabrics keep alive fixes (Hannes)
- tcp authentication fixes (Mark)
- io_uring_cmd error handling fix (Anuj)
- stale firmware attribute fix (Daniel)
- tcp memory leak (Christophe)
- crypto library usage simplification (Eric)
- nbd use-after-free fix. May need a followup, but at least it's better
than what it was before (Li)
- Rate limit write on read-only device warnings (Yu)
* tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux:
nvme: keyring: fix conditional compilation
nvme: common: make keyring and auth separate modules
blk-core: use pr_warn_ratelimited() in bio_check_ro()
nbd: fix uaf in nbd_open
nvme: start keep-alive after admin queue setup
nvme-loop: always quiesce and cancel commands before destroying admin q
nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()
nvme-auth: always set valid seq_num in dhchap reply
nvme-auth: add flag for bi-directional auth
nvme-auth: auth success1 msg always includes resp
nvme: fix error-handling for io_uring nvme-passthrough
nvme: update firmware version after commit
nvme-tcp: Fix a memory leak
nvme-auth: use crypto_shash_tfm_digest()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Revert a change in ata_pci_shutdown_one() to suspend disks on
shutdown as this is now done using the manage_shutdown scsi device
flag (me)
- Change the pata_falcon and pata_gayle drivers to stop using
module_platform_driver_probe(). This makes these drivers more inline
with all other drivers (allowing bind/unbind) and suppress a
compilation warning (Uwe)
- Convert the pata_falcon and pata_gayle drivers to the new
.remove_new() void-return callback. These 2 drivers are the last ones
needing this change (Uwe)
* tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_gayle: Convert to platform remove callback returning void
ata: pata_falcon: Convert to platform remove callback returning void
ata: pata_gayle: Stop using module_platform_driver_probe()
ata: pata_falcon: Stop using module_platform_driver_probe()
ata: libata-core: Fix ata_pci_shutdown_one()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for handling misaligned accesses in S-mode
- Probing for misaligned access support is now properly cached and
handled in parallel
- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions
- Performance improvements for TLB flushing
- Support for many new relocations in the module loader
- Various bug fixes and cleanups
* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
riscv: Optimize bitops with Zbb extension
riscv: Rearrange hwcap.h and cpufeature.h
drivers: perf: Do not broadcast to other cpus when starting a counter
drivers: perf: Check find_first_bit() return value
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
RISC-V: Probe misaligned access speed in parallel
RISC-V: Remove __init on unaligned_emulation_finish()
RISC-V: Show accurate per-hart isa in /proc/cpuinfo
RISC-V: Don't rely on positional structure initialization
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
riscv: split cache ops out of dma-noncoherent.c
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
...
|
|
Pull MIPS updates from Thomas Bogendoerfer:
- removed AR7 platform support
- cleanups and fixes
* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: AR7: remove platform
watchdog: ar7_wdt: remove driver to prepare for platform removal
vlynq: remove bus driver
mtd: parsers: ar7: remove support
serial: 8250: remove AR7 support
arch: mips: remove ReiserFS from defconfig
MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
MIPS: KVM: Fix a build warning about variable set but not used
MIPS: Remove dead code in relocate_new_kernel
mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
mips: dts: ralink: mt7621: define each reset as an item
mips: dts: ingenic: Remove unneeded probe-type properties
MIPS: loongson32: Remove dma.h and nand.h
|
|
When clearing the root PD fails we need to properly release it again.
Signed-off-by: Christian König <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
mem = bo->tbo.resource may be NULL in amdgpu_vm_bo_update.
Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
We need kernel scheduling entities to deal with handle clean up
if apps are not cleaned up properly. With commit 56e449603f0ac5
("drm/sched: Convert the GPU scheduler to variable number of run-queues")
the scheduler entities have to be created after scheduler init, so
change the ordering to fix this.
v2: Leave logic in UVD and VCE code
Fixes: 56e449603f0a ("drm/sched: Convert the GPU scheduler to variable number of run-queues")
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Luben Tuikov <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
The kfd_resume needs to touch GC registers to enable the interrupts,
it needs to be done before GFXOFF is enabled to ensure that the GFX is
not off and GC registers can be touched. So move kfd_resume before the
amdgpu_device_ip_late_init which enables the CGPG/GFXOFF.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If a user has disabled GFXOFF this may cause problems for the suspend
sequence. Ensure that it is enabled in amdgpu_acpi_is_s0ix_active().
The system won't reach the deepest state but it also won't hang.
Signed-off-by: Mario Limonciello <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-fixes for v6.7-rc1:
qxl:
- qxl memory leak fix.
syncobj:
- Fix waiting for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE
vc4:
- Fix UAF in mock helpers
Signed-off-by: Daniel Vetter <[email protected]>
From: Maarten Lankhorst <[email protected]>
[sima: Stitch together both changelogs from Maarten. Also because of
branch history this contains a few more bugfixes which are already in
v6.6, but I didn't feel like this justifies some backmerge since there
wasn't any real conflict.]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v6.7-rc1:
- Fix null dereference when perf interface is not available
- Fix a -Wstringop-overflow warning
- Fix a -Wformat-truncation warning in intel_tc_port_init
- Flush WC GGTT only on required platforms
- Fix MTL HBR3 rate support on C10 phy and eDP
- Fix MTL notify_guc for multi-GT
- Bump GLK CDCLK frequency when driving multiple pipes
- Fix potential spectre vulnerability
Signed-off-by: Daniel Vetter <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.
Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
called which dereferences cur_msg (which is now NULL)
Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag.
Signed-off-by: Mark Hasemeyer <[email protected]>
Link: https://lore.kernel.org/r/20231107144743.v1.1.I7987f05f61901f567f7661763646cb7d7919b528@changeid
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]
|
|
The PWMF_REQUESTED enum is supposed to be used with test_bit() and not
used as in a bitwise AND. In this specific code the flag will never be
set so the function is effectively a no-op.
Fixes: e3fe982b2e4e ("pwm: samsung: Put per-channel data into driver data")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Sam Protsenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
|
|
wr_reg_wa() is not an appropriate name for a global function, and doesn't need
to be global anyway, so mark it static and avoid the warning:
drivers/video/fbdev/fsl-diu-fb.c:493:6: error: no previous prototype for 'wr_reg_wa' [-Werror=missing-prototypes]
Fixes: 0d9dab39fbbe ("powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
warning
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Signed-off-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
This is only used locally, so mark it static to avoid a warning:
drivers/parport/parport_gsc.c:395:5: error: no previous prototype for 'parport_gsc_init' [-Werror=missing-prototypes]
Acked-by: Helge Deller <[email protected]>
Acked-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
When CONFIG_SYSFB is disabled, the hyperv_fb driver can now run into
undefined behavior on a gen2 VM, as indicated by this smatch warning:
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'base'.
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'size'.
Since there is no way to know the actual framebuffer in this configuration,
just return an allocation failure here, which should avoid the build
warning and the undefined behavior.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Fixes: a07b50d80ab6 ("hyperv: avoid dependency on screen_info")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015: section mismatch in reference: tpd_driver+0x4 (section: .data) -> tpd_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410: section mismatch in reference: tfp410_driver+0x4 (section: .data) -> tfp410_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01: section mismatch in reference: sharp_ls_driver+0x4 (section: .data) -> sharp_ls_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
WARNING: modpost: drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410: section mismatch in reference: tfp410_driver+0x4 (section: .data) -> tfp410_remove (section: .exit.text)
To simplify matters, move the remove callback to .text and drop
.suppress_bind_attrs = true.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|