aboutsummaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-12-02Merge tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds38-159/+237
Pull drm fixes from Dave Airlie: "Bit of an uptick in patch count this week, though it's all relatively small overall. I suspect msm has been queuing up a few fixes to skew it here. Otherwise amdgpu has a scattered bunch of small fixes, and then some vc4, i915. virtio-gpu changes an rc1 introduced uAPI mistake, and makes it operate more like other drivers. This should be fine as no userspace relies on the behaviour yet. Summary: dma-buf: - memory leak fix msm: - kasan found memory overwrite - mmap flags - fencing error bug - ioctl NULL ptr - uninit var - devfreqless devices fix - dsi lanes fix - dp: avoid unpowered aux xfers amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free i915: - backlight regression - Intel HDR backlight detection fix - revert TGL workaround that caused hangs virtio-gpu: - switch back to drm_poll vc4: - memory leak - error check fix - HVS modesetting fixes" * tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits) Revert "drm/i915: Implement Wa_1508744258" drm/amdkfd: process_info lock not needed for svm drm/amdgpu: adjust the kfd reset sequence in reset sriov function drm/amd/display: add connector type check for CRC source set drm/amdkfd: fix double free mem structure drm/amdkfd: set "r = 0" explicitly before goto drm/amd/display: Add work around for tunneled MST. drm/amd/display: Fix for the no Audio bug with Tiled Displays drm/amd/display: Clear DPCD lane settings after repeater training drm/amd/display: Allow DSC on supported MST branch devices drm/amdgpu: Don't halt RLC on GFX suspend drm/amdgpu: fix the missed handling for SDMA2 and SDMA3 drm/amdgpu: check atomic flag to differeniate with legacy path drm/amdgpu: cancel the correct hrtimer on exit drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID drm/i915/dp: Perform 30ms delay after source OUI write dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow drm/i915: Add support for panels with VESA backlights with PWM enable/disable drm/vc4: kms: Fix previous HVS commit wait drm/vc4: kms: Don't duplicate pending commit ...
2021-12-03Merge tag 'drm-intel-fixes-2021-12-02' of ↵Dave Airlie5-13/+42
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fixing a regression where the backlight brightness control stopped working. - Fix the Intel HDR backlight support detection. - Reverting a w/a to fix a gpu Hang in TGL. The w/a itself was also for a hang, but in a much rarer scenario. The proper solution need to be done with help from user space and it will be addressed later. Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-03Merge tag 'drm-misc-fixes-2021-12-02' of ↵Dave Airlie5-66/+21
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Switch back to drm_poll for virtio, multiple fixes (memory leak, improper error check, some functional fixes too) for vc4, memory leak fix in dma-buf, Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20211202084440.u3b7lbeulj7k3ltg@houat
2021-12-02Merge tag 'net-5.16-rc4' of ↵Linus Torvalds69-298/+757
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and wireguard. Mostly scattered driver changes this week, with one big clump in mv88e6xxx. Nothing of note, really. Current release - regressions: - smc: keep smc_close_final()'s error code during active close Current release - new code bugs: - iwlwifi: various static checker fixes (int overflow, leaks, missing error codes) - rtw89: fix size of firmware header before transfer, avoid crash - mt76: fix timestamp check in tx_status; fix pktid leak; - mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set() Previous releases - regressions: - smc: fix list corruption in smc_lgr_cleanup_early - ipv4: convert fib_num_tclassid_users to atomic_t Previous releases - always broken: - tls: fix authentication failure in CCM mode - vrf: reset IPCB/IP6CB when processing outbound pkts, prevent incorrect processing - dsa: mv88e6xxx: fixes for various device errata - rds: correct socket tunable error in rds_tcp_tune() - ipv6: fix memory leak in fib6_rule_suppress - wireguard: reset peer src endpoint when netns exits - wireguard: improve resilience to DoS around incoming handshakes - tcp: fix page frag corruption on page fault which involves TCP - mpls: fix missing attributes in delete notifications - mt7915: fix NULL pointer dereference with ad-hoc mode Misc: - rt2x00: be more lenient about EPROTO errors during start - mlx4_en: update reported link modes for 1/10G" * tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: dsa: b53: Add SPI ID table gro: Fix inconsistent indenting selftests: net: Correct case name net/rds: correct socket tunable error in rds_tcp_tune() mctp: Don't let RTM_DELROUTE delete local routes net/smc: Keep smc_close_final rc during active close ibmvnic: drop bad optimization in reuse_tx_pools() ibmvnic: drop bad optimization in reuse_rx_pools() net/smc: fix wrong list_del in smc_lgr_cleanup_early Fix Comment of ETH_P_802_3_MIN ethernet: aquantia: Try MAC address from device tree ipv4: convert fib_num_tclassid_users to atomic_t net: avoid uninit-value from tcp_conn_request net: annotate data-races on txq->xmit_lock_owner octeontx2-af: Fix a memleak bug in rvu_mbox_init() net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources() vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings() net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family ...
2021-12-02Merge tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds1-8/+33
Pull IPMI fixes from Corey Minyard: "Some changes that went in 5.16 had issues. When working on the design a piece was redesigned and things got missed. And the message type was not being initialized when it was allocated, resulting in crashes. In addition, the IPMI driver has had a shutdown issue where it could still have an item in a system workqueue after it had been shutdown. Move to a private workqueue to avoid that problem" * tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi: ipmi:ipmb: Fix unknown command response ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking ipmi: fix oob access due to uninit smi_msg type ipmi: msghandler: Make symbol 'remove_work_wq' static ipmi: Move remove_work to dedicated workqueue
2021-12-02Revert "drm/i915: Implement Wa_1508744258"José Roberto de Souza1-7/+0
This workarounds are causing hangs, because I missed the fact that it needs to be enabled for all cases and disabled when doing a resolve pass. So KMD only needs to whitelist it and UMD will be the one setting it on per case. This reverts commit 28ec02c9cbebf3feeaf21a59df9dfbc02bda3362. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145 Signed-off-by: José Roberto de Souza <[email protected]> Fixes: 28ec02c9cbeb ("drm/i915: Implement Wa_1508744258") Reviewed-by: Matt Atwood <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit f3799ff16fcfacd44aee55db162830df461b631f) Signed-off-by: Rodrigo Vivi <[email protected]>
2021-12-02net: dsa: b53: Add SPI ID tableFlorian Fainelli1-0/+14
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-02ibmvnic: drop bad optimization in reuse_tx_pools()Sukadev Bhattiprolu1-11/+3
When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: bbd809305bc7 ("ibmvnic: Reuse tx pools when possible") Reported-by: Dany Madden <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Reviewed-by: Rick Lindsley <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-02ibmvnic: drop bad optimization in reuse_rx_pools()Sukadev Bhattiprolu1-11/+3
When trying to decide whether or not reuse existing rx/tx pools we tried to allow a range of values for the pool parameters rather than exact matches. This was intended to reuse the resources for instance when switching between two VIO servers with different default parameters. But this optimization is incomplete and breaks when we try to change the number of queues for instance. The optimization needs to be updated, so drop it for now and simplify the code. Fixes: 489de956e7a2 ("ibmvnic: Reuse rx pools when possible") Reported-by: Dany Madden <[email protected]> Signed-off-by: Sukadev Bhattiprolu <[email protected]> Reviewed-by: Dany Madden <[email protected]> Reviewed-by: Rick Lindsley <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-02ethernet: aquantia: Try MAC address from device treeTianhao Chai1-10/+14
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the card, but instead need to obtain MAC addresses from the device tree. In this case the hardware will report an invalid MAC. Currently atlantic driver does not query the DT for MAC address and will randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in. This patch causes the driver to perfer a valid MAC address from OF (if present) over HW self-reported MAC and only fall back to a random MAC address when neither of them is valid. Signed-off-by: Tianhao Chai <[email protected]> Reviewed-by: Igor Russkikh <[email protected]> Reviewed-by: Hector Martin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-01octeontx2-af: Fix a memleak bug in rvu_mbox_init()Zhou Qingyang1-1/+1
In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by: Zhou Qingyang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-01net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()Zhou Qingyang1-2/+7
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by: Zhou Qingyang <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-01vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmitStephen Suryaputra1-0/+2
IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts in the codepath of vrf device xmit function so that leftover garbage doesn't cause futher code that uses the CB to incorrectly process the pkt. One occasion of the issue might occur when MPLS route uses the vrf device as the outgoing device such as when the route is added using "ip -f mpls route add <label> dev <vrf>" command. The problems seems to exist since day one. Hence I put the day one commits on the Fixes tags. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Fixes: 35402e313663 ("net: Add IPv6 support to VRF device") Cc: [email protected] Signed-off-by: Stephen Suryaputra <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-01net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()Zhou Qingyang1-2/+8
In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine") Signed-off-by: Zhou Qingyang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-12-02Merge tag 'amd-drm-fixes-5.16-2021-12-01' of ↵Dave Airlie16-40/+90
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.16-2021-12-01: amdgpu: - IP discovery based enumeration fixes - vkms fixes - DSC fixes for DP MST - Audio fix for hotplug with tiled displays - Misc display fixes - DP tunneling fix - DP fix - Aldebaran fix amdkfd: - Locking fix - Static checker fix - Fix double free Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-12-02Merge tag 'drm-msm-fixes-2021-11-28' of ↵Dave Airlie12-40/+84
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm misc fixes, build, display Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsV-ntO_u323XMKuD6bgbgvXporwi1sbyXwNDAuA52Afw@mail.gmail.com
2021-12-01drm/amdkfd: process_info lock not needed for svmPhilip Yang1-9/+0
process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms and userptr valid/inval list, svm_range_restore_work and svm_range_set_attr don't access those, so do not need to take process_info lock. This will avoid potential circular locking issue. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: adjust the kfd reset sequence in reset sriov functionshaoyunl1-4/+8
This change revert previous commits: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function") This change moves the amdgpu_amdkfd_pre_reset to an earlier place in amdgpu_device_reset_sriov, presumably to address the sequence issue that the first patch was originally meant to fix. Some register access(GRBM_GFX_CNTL) only be allowed on full access mode. Move kfd_pre_reset and kfd_post_reset back inside reset_sriov function. Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov") Fixes: 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function") Signed-off-by: shaoyunl <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: add connector type check for CRC source setPerry Yuan1-0/+8
[Why] IGT bypass test will set crc source as DPRX,and display DM didn`t check connection type, it run the test on the HDMI connector ,then the kernel will be crashed because aux->transfer is set null for HDMI connection. This patch will skip the invalid connection test and fix kernel crash issue. [How] Check the connector type while setting the pipe crc source as DPRX or auto,if the type is not DP or eDP, the crtc crc source will not be set and report error code to IGT test,IGT will show the this subtest as no valid crtc/connector combinations found. 116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode [ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 117.731001] #PF: supervisor instruction fetch in kernel mode [ 117.731003] #PF: error_code(0x0010) - not-present page [ 117.731004] PGD 0 P4D 0 [ 117.731006] Oops: 0010 [#1] SMP NOPTI [ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu [ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021 [ 117.731012] RIP: 0010:0x0 [ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246 [ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e [ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8 [ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0 [ 117.731023] PKRU: 55555554 [ 117.731024] Call Trace: [ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] [ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] [ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper] [ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu] [ 117.731149] crtc_crc_open+0x174/0x220 [drm] [ 117.731162] full_proxy_open+0x168/0x1f0 [ 117.731165] ? open_proxy_open+0x100/0x100 BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546 Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Perry Yuan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdkfd: fix double free mem structurePhilip Yang1-3/+5
drm_gem_object_put calls release_notify callback to free the mem structure and unreserve_mem_limit, move it down after the last access of mem and make it conditional call. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdkfd: set "r = 0" explicitly before gotoPhilip Yang1-0/+4
To silence the following Smatch static checker warning: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2615 svm_range_restore_pages() warn: missing error code here? 'get_task_mm()' failed. 'r' = '0' Signed-off-by: Philip Yang <[email protected]> Suggested-by: Dan Carpenter <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: Add work around for tunneled MST.Jimmy Kizito4-11/+30
[Why] Certain USB4 docks do not seem to be able to handle disabling DSC once it has been enabled on an MST stream. This can result in blank displays. [How] As a work around, always enable DSC on docks exhibiting this issue. The flag to indicate the use of DSC for MST streams on a USB4 dock is set during detection of the dock and only cleared when the USB4 dock is disconnected. Reviewed-by: Jun Lei <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Jimmy Kizito <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: Fix for the no Audio bug with Tiled DisplaysMustapha Ghaddar1-0/+4
[WHY] It seems like after a series of plug/unplugs we end up in a situation where tiled display doesnt support Audio. [HOW] The issue seems to be related to when we check streams changed after an HPD, we should be checking the audio_struct as well to see if any of its values changed. Reviewed-by: Jun Lei <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Mustapha Ghaddar <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: Clear DPCD lane settings after repeater trainingShen, George1-1/+1
[Why] VS and PE requested by repeater should not persist for the sink. [How] Clear DPCD lane settings after repeater link training finishes. Reviewed-by: Wesley Chalmers <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amd/display: Allow DSC on supported MST branch devicesNicholas Kazlauskas1-4/+16
[Why] When trying to lightup two 4k60 non-DSC displays behind a branch device that supports DSC we can't lightup both at once due to bandwidth limitations - each requires 48 VCPI slots but we only have 63. [How] The workaround already exists in the code but is guarded by a CONFIG that cannot be set by the user and shouldn't need to be. Check for specific branch device IDs to device whether to enable the workaround for multiple display scenarios. Reviewed-by: Hersen Wu <[email protected]> Acked-by: Bhawanpreet Lakha <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-12-01drm/amdgpu: Don't halt RLC on GFX suspendLijo Lazar2-4/+5
On aldebaran, RLC also controls GFXCLK. Skip halting RLC during GFX IP suspend and keep it running till PMFW disables all DPMs. [ 578.019986] amdgpu 0000:23:00.0: amdgpu: GPU reset begin! [ 583.245566] amdgpu 0000:23:00.0: amdgpu: Failed to disable smu features. [ 583.245621] amdgpu 0000:23:00.0: amdgpu: Fail to disable dpm features! [ 583.245639] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62 [ 583.248504] [drm] free PSP TMR buffer Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: fix the missed handling for SDMA2 and SDMA3Guchun Chen1-0/+2
There is no base reg offset or ip_version set for SDMA2 and SDMA3 on SIENNA_CICHLID, so add them. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Kevin Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: check atomic flag to differeniate with legacy pathFlora Cui1-2/+2
since vkms support atomic KMS interface Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu: cancel the correct hrtimer on exitFlora Cui1-2/+2
Signed-off-by: Flora Cui <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLIDJane Jian3-0/+3
[WHY] for sriov odd# vf will modify vcn0 engine ip revision(due to multimedia bandwidth feature), which will be mismatched with original vcn0 revision [HOW] add new version check for vcn0 disabled revision(3, 0, 192), typically modified under sriov mode Signed-off-by: Jane Jian <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-12-01Merge tag 'wireless-drivers-2021-12-01' of ↵David S. Miller17-49/+116
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.16 First set of fixes for v5.16. Mostly crash and driver initialisation fixes, the fix for rtw89 being most important. iwlwifi * compiler, lockdep and smatch warning fixes * fix for a rare driver initialisation failure * fix a memory leak rtw89 * fix const buffer modification causing a kernel crash mt76 * fix null pointer access * fix idr leak rt2x00 * fix driver initialisation errors, a regression since v5.2-rc1 ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-01Merge tag 'mlx5-fixes-2021-11-30' of ↵David S. Miller14-60/+93
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-11-30 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-12-01net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassedMarek Behún1-6/+42
Function mv88e6xxx_serdes_pcs_get_state() currently does not report link up if AN is enabled, Link bit is set, but Speed and Duplex Resolved bit is not set, which testing shows is the case for when auto-negotiation was bypassed (we have AN enabled but link partner does not). An example of such link partner is Marvell 88X3310 PHY, when put into the mode where host interface changes between 10gbase-r, 5gbase-r, 2500base-x and sgmii according to copper speed. The 88X3310 does not enable AN in 2500base-x, and so SerDes on mv88e6xxx currently does not link with it. Fix this. Fixes: a5a6858b793f ("net: dsa: mv88e6xxx: extend phylink to Serdes PHYs") Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-01net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X familyMarek Behún2-1/+61
Inband AN is broken on Amethyst in 2500base-x mode when set by standard mechanism (via cmode). (There probably is some weird setting done by default in the switch for this mode that make it cycle in some state or something, because when the peer is the mvneta controller, it receives link change interrupts every ~0.3ms, but the link is always down.) Get around this by configuring the PCS mode to 1000base-x (where inband AN works), and then changing the SerDes frequency while SerDes transmitter and receiver are disabled, before enabling SerDes PHY. After disabling SerDes PHY, change the PCS mode back to 2500base-x, to avoid confusing the device (if we leave it at 1000base-x PCS mode but with different frequency, and then change cmode to sgmii, the device won't change the frequency because it thinks it already has the correct one). The register which changes the frequency is undocumented. I discovered it by going through all registers in the ranges 4.f000-4.f100 and 1e.8000-1e.8200 for all SerDes cmodes (sgmii, 1000base-x, 2500base-x, 5gbase-r, 10gbase-r, usxgmii) and filtering out registers that didn't make sense (the value was the same for modes which have different frequency). The result of this was: reg sgmii 1000base-x 2500base-x 5gbase-r 10gbase-r usxgmii 04.f002 005b 0058 0059 005c 005d 005f 04.f076 3000 0000 1000 4000 5000 7000 04.f07c 0950 0950 1850 0550 0150 0150 1e.8000 0059 0059 0058 0055 0051 0051 1e.8140 0e20 0e20 0e28 0e21 0e42 0e42 Register 04.f002 is the documented Port Operational Confiuration register, it's last 3 bits select PCS type, so changing this register also changes the frequency to the appropriate value. Registers 04.f076 and 04.f07c are not writable. Undocumented register 1e.8000 was the one: changing bits 3:0 from 9 to 8 changed SerDes frequency to 3.125 GHz, while leaving the value of PCS mode in register 04.f002.2:0 at 1000base-x. Inband autonegotiation started working correctly. (I didn't try anything with register 1e.8140 since 1e.8000 solved the problem.) Since I don't have documentation for this register 1e.8000.3:0, I am using the constants without names, but my hypothesis is that this register selects PHY frequency. If in the future I have access to an oscilloscope able to handle these frequencies, I will try to test this hypothesis. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-01net: dsa: mv88e6xxx: Add fix for erratum 5.2 of 88E6393X familyMarek Behún1-0/+48
Add fix for erratum 5.2 of the 88E6393X (Amethyst) family: for 10gbase-r mode, some undocumented registers need to be written some special values. Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-01net: dsa: mv88e6xxx: Save power by disabling SerDes trasmitter and receiverMarek Behún2-4/+45
Save power on 88E6393X by disabling SerDes receiver and transmitter after SerDes is SerDes is disabled. Signed-off-by: Marek Behún <[email protected]> Cc: [email protected] # de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: David S. Miller <[email protected]>
2021-12-01net: dsa: mv88e6xxx: Drop unnecessary check in mv88e6393x_serdes_erratum_4_6()Marek Behún1-17/+11
The check for lane is unnecessary, since the function is called only with allowed lane argument. Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-01net: dsa: mv88e6xxx: Fix application of erratum 4.8 for 88E6393XMarek Behún1-20/+33
According to SERDES scripts for 88E6393X, erratum 4.8 has to be applied every time before SerDes is powered on. Split the code for erratum 4.8 into separate function and call it in mv88e6393x_serdes_power(). Fixes: de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family") Signed-off-by: Marek Behún <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-12-01drm/i915/dp: Perform 30ms delay after source OUI writeLyude Paul4-0/+21
While working on supporting the Intel HDR backlight interface, I noticed that there's a couple of laptops that will very rarely manage to boot up without detecting Intel HDR backlight support - even though it's supported on the system. One example of such a laptop is the Lenovo P17 1st generation. Following some investigation Ville Syrjälä did through the docs they have available to them, they discovered that there's actually supposed to be a 30ms wait after writing the source OUI before we begin setting up the rest of the backlight interface. This seems to be correct, as adding this 30ms delay seems to have completely fixed the probing issues I was previously seeing. So - let's start performing a 30ms wait after writing the OUI, which we do in a manner similar to how we keep track of PPS delays (e.g. record the timestamp of the OUI write, and then wait for however many ms are left since that timestamp right before we interact with the backlight) in order to avoid waiting any longer then we need to. As well, this also avoids us performing this delay on systems where we don't end up using the HDR backlight interface. V3: * Move last_oui_write into intel_dp V2: * Move panel delays into intel_pps Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Fixes: 4a8d79901d5b ("drm/i915/dp: Enable Intel's HDR backlight interface (only SDR for now)") Cc: Ville Syrjälä <[email protected]> Cc: <[email protected]> # v5.12+ Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit c7c90b0b8418a97d3aa8b39aae1992908948efad) Signed-off-by: Rodrigo Vivi <[email protected]>
2021-12-01dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flowGuangming1-1/+1
For previous version, it uses 'sg_table.nent's to traverse sg_table in pages free flow. However, 'sg_table.nents' is reassigned in 'dma_map_sg', it means the number of created entries in the DMA adderess space. So, use 'sg_table.nents' in pages free flow will case some pages can't be freed. Here we should use sg_table.orig_nents to free pages memory, but use the sgtable helper 'for each_sgtable_sg'(, instead of the previous rather common helper 'for_each_sg' which maybe cause memory leak) is much better. Fixes: d963ab0f15fb0 ("dma-buf: system_heap: Allocate higher order pages if available") Signed-off-by: Guangming <[email protected]> Reviewed-by: Robin Murphy <[email protected]> Cc: <[email protected]> # 5.11.* Reviewed-by: Christian König <[email protected]> Reviewed-by: John Stultz <[email protected]> Signed-off-by: Sumit Semwal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-11-30net/mlx5e: SHAMPO, Fix constant expression resultBen Ben-Ishay1-5/+3
mlx5e_build_shampo_hd_umr uses counters i and index incorrectly as unsigned, thus the err state err_unmap could stuck in endless loop. Change i to int to solve the first issue. Reduce index check to solve the second issue, the caller function validates that index could not rotate. Fixes: 64509b052525 ("net/mlx5e: Add data path for SHAMPO feature") Signed-off-by: Ben Ben-Ishay <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: Fix access to a non-supported registerAya Levin2-6/+4
Validate MRTC register is supported before triggering a delayed work which accesses it. Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: Fix too early queueing of log timestamp workGal Pressman1-2/+3
The log timestamp work should not be queued before the command interface is initialized, move it to a later stage in the init flow. Fixes: 5a1023deeed0 ("net/mlx5: Add periodic update of host time to firmware") Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: Fix use after free in mlx5_health_wait_pci_upAmir Tzin3-13/+15
The device health recovery flow calls mlx5_health_wait_pci_up() which queries the device for FW_RESET timeout after freeing the device timeouts structure on mlx5_function_teardown(). Fix this bug by moving timeouts structure init/cleanup to the device's init/uninit phases. Since it is necessary to reset default software timeouts on function reload, extract setting of defaults values from mlx5_tout_init() and call mlx5_tout_set_def_val() directly from mlx5_function_setup(). Fixes: 5945e1adeab5 ("net/mlx5: Read timeout values from init segment") Reported by: Niklas Schnelle <[email protected]> Signed-off-by: Amir Tzin <[email protected]> Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: E-Switch, Use indirect table only if all destinations support itMaor Dickman1-4/+15
When adding rule with multiple destinations, indirect table is used for all of the destinations if at least one of the destinations support it, this can cause creation of invalid indirect tables for the destinations that doesn't support it. Fixed it by using indirect table only if all destinations support it. Fixes: a508728a4c8b ("net/mlx5e: VF tunnel RX traffic offloading") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: E-Switch, Check group pointer before reading bw_share valueDmytro Linkin1-1/+1
If log_esw_max_sched_depth is not supported group pointer of the vport is NULL. Hence, check the pointer before reading bw_share value. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: E-Switch, fix single FDB creation on BlueFieldMark Bloch1-0/+1
Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL table for single FDB. Not doing so on BlueField will make firmware fail the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE) which is filled in the flow table creation command but as the other_vport field wasn't set the firmware complains about a bad parameter. This is different from a regular HCA where the E-Switch manager vport is the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the firmware happy both on BlueField and on regular HCAs without special condition for each. This fixes the bellow firmware syndrome: mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4) Fixes: db202995f503 ("net/mlx5: E-Switch, add logic to enable shared FDB") Signed-off-by: Mark Bloch <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: E-switch, Respect BW share of the new groupDmytro Linkin1-1/+1
To enable transmit schduler on vport FW require non-zero configuration for vport's TSAR. If vport added to the group which has configured BW share value and TX rate values of the vport are zero, then scheduler wouldn't be enabled on this vport. Fix that by calling BW normalization if BW share of the new group is configured. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: Lag, Fix recreation of VF LAGMaor Gottlieb1-0/+1
Driver needs to nullify the port select attributes of the LAG when port selection is destroyed, otherwise it breaks recreation of the LAG. It fixes the below kernel oops: [ 587.906377] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 587.908843] #PF: supervisor read access in kernel mode [ 587.910730] #PF: error_code(0x0000) - not-present page [ 587.912580] PGD 0 P4D 0 [ 587.913632] Oops: 0000 [#1] SMP PTI [ 587.914644] CPU: 5 PID: 165 Comm: kworker/u20:5 Tainted: G OE 5.9.0_mlnx #1 [ 587.916152] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 587.918332] Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core] [ 587.919479] RIP: 0010:mlx5_del_flow_rules+0x10/0x270 [mlx5_core] [ 587.920568] mlx5_core 0000:08:00.1 enp8s0f1: Link up [ 587.920680] Code: c0 09 80 a0 e8 cf 42 a4 e0 48 c7 c3 f4 ff ff ff e8 8a 88 dd e0 e9 ab fe ff ff 0f 1f 44 00 00 41 56 41 55 49 89 fd 41 54 55 53 <48> 8b 47 08 48 8b 68 28 48 85 ed 74 2e 48 8d 7d 38 e8 6a 64 34 e1 [ 587.925116] bond0: (slave enp8s0f1): Enslaving as an active interface with an up link [ 587.930415] RSP: 0018:ffffc9000048fd88 EFLAGS: 00010282 [ 587.930417] RAX: ffff88846c14fac0 RBX: ffff88846cddcb80 RCX: 0000000080400007 [ 587.930417] RDX: 0000000080400008 RSI: ffff88846cddcb80 RDI: 0000000000000000 [ 587.930419] RBP: ffff88845fd80140 R08: 0000000000000001 R09: ffffffffa074ba00 [ 587.938132] R10: ffff88846c14fec0 R11: 0000000000000001 R12: ffff88846c122f10 [ 587.939473] R13: 0000000000000000 R14: 0000000000000001 R15: ffff88846d7a0000 [ 587.940800] FS: 0000000000000000(0000) GS:ffff88846fa80000(0000) knlGS:0000000000000000 [ 587.942416] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 587.943536] CR2: 0000000000000008 CR3: 000000000240a002 CR4: 0000000000770ee0 [ 587.944904] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 587.946308] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 587.947639] PKRU: 55555554 [ 587.948236] Call Trace: [ 587.948834] mlx5_lag_destroy_definer.isra.3+0x16/0x90 [mlx5_core] [ 587.950033] mlx5_lag_destroy_definers+0x5b/0x80 [mlx5_core] [ 587.951128] mlx5_deactivate_lag+0x6e/0x80 [mlx5_core] [ 587.952146] mlx5_do_bond+0x150/0x450 [mlx5_core] [ 587.953086] mlx5_do_bond_work+0x3e/0x50 [mlx5_core] [ 587.954086] process_one_work+0x1eb/0x3e0 [ 587.954899] worker_thread+0x2d/0x3c0 [ 587.955656] ? process_one_work+0x3e0/0x3e0 [ 587.956493] kthread+0x115/0x130 [ 587.957174] ? kthread_park+0x90/0x90 [ 587.957929] ret_from_fork+0x1f/0x30 [ 587.973055] ---[ end trace 71ccd6eca89f5513 ]--- Fixes: b7267869e923 ("net/mlx5: Lag, add support to create/destroy/modify port selection") Signed-off-by: Maor Gottlieb <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2021-11-30net/mlx5: Move MODIFY_RQT command to ignore list in internal error stateMoshe Shemesh1-1/+1
When the device is in internal error state, command interface isn't accessible and the driver decides which commands to fail and which to ignore. Move the MODIFY_RQT command to the ignore list in order to avoid the following redundant warning messages in internal error state: mlx5_core 0000:82:00.1: mlx5e_rss_disable:419:(pid 23754): Failed to redirect RQT 0x0 to drop RQ 0xc00848: err = -5 mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:598:(pid 23754): Failed to redirect direct RQT 0x1 to drop RQ 0xc00848 (channel 0): err = -5 mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:607:(pid 23754): Failed to redirect XSK RQT 0x19 to drop RQ 0xc00848 (channel 0): err = -5 Fixes: 43ec0f41fa73 ("net/mlx5e: Hide all implementation details of mlx5e_rx_res") Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.