| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Drivers using legacy PCI power management .suspend()/.resume() callbacks
have to manage PCI states and device's PM states themselves. They also
need to take care of standard configuration registers.
Switch to generic power management framework using a "struct dev_pm_ops"
variable to take the unnecessary load from the driver.
This also avoids the need for the driver to directly call most of the PCI
helper functions and device power state control functions, as through
the generic framework PCI Core takes care of the necessary operations,
and drivers are required to do only device-specific jobs.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907070221.29938-3-vaibhavgupta40@gmail.com
|
|
Fixes commit 42ddb453a0cd ("radeon: Conditionally compile PM code")
Before the above mentioned patch, codes between the line number 547 and
2803 were already inside "#ifdef CONFIG_PM" container. Thus, addition of
"#if defined(CONFIG_PM)" was not required in the patch. It also affected
the "#ifdef CONFIG_PPC_OF" container (line 1943-2510).
From the current snapshot of radeon_pm.c, remove:
1434 | #if defined(CONFIG_PM)
and,
2213 | #endif
This removes the redundant CONFIG_PM directive as well as fixes the
CONFIG_PPC (earlier CONFIG_PPC_OF) container.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200907070221.29938-2-vaibhavgupta40@gmail.com
|
|
The only in-tree user for mbx driver for Intel 2700G graphics chip was
cm-x270 platform. Since this platform was removed by the commit
9d3239147d6d ("ARM: pxa: remove Compulab pxa2xx boards") there is no
point to keep the obsolete framebuffer driver.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200830115524.431278-1-rppt@kernel.org
|
|
This addresses the following gcc warning with "make W=1":
drivers/video/fbdev/kyro/STG4000InitDevice.c: In function
‘SetCoreClockPLL’:
drivers/video/fbdev/kyro/STG4000InitDevice.c:247:6: warning: variable
‘ulCoreClock’ set but not used [-Wunused-but-set-variable] // yanaijie
fixed
247 | u32 ulCoreClock;
| ^~~~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827130028.428893-1-yanaijie@huawei.com
|
|
This addresses the following gcc warning with "make W=1":
drivers/video/fbdev/kyro/STG4000InitDevice.c: In function
‘ProgramClock’:
drivers/video/fbdev/kyro/STG4000InitDevice.c:123:6: warning: variable
‘ulBestVCO’ set but not used [-Wunused-but-set-variable]
123 | u32 ulBestVCO = 0, ulBestClk = 0, ulBestScore = 0;
| ^~~~~~~~~
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200827130008.428706-1-yanaijie@huawei.com
|
|
Use kobj_to_dev() instead of container_of()
Generated by: scripts/coccinelle/api/kobj_to_dev.cocci
Cc: Denis Efremov <efremov@linux.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Cc: Bernie Thompson <bernie@plugable.com>
[b.zolnierkie: minor patch summary fixup]
[b.zolnierkie: removed "Fixes:" tag (not in upstream tree)]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.22.394.2008262252270.2522@hadrien
|
|
When radeon_kick_out_firmware_fb() fails, info should be
freed just like the subsequent error paths.
Fixes: 069ee21a82344 ("fbdev: Fix loading of module radeonfb on PowerMac")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Mathieu Malaterre <malat@debian.org>
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200825062900.11210-1-dinghao.liu@zju.edu.cn
|
|
Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Jiri Kosina <trivial@kernel.org>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <3e56046e67e583ac93030297ff6d58c08ca54086.1598331149.git.joe@perches.com
|
|
par->vgapass is a u8, so if we are assuming that buf is at least
PAGE_SIZE then the extra checking is pointless.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200824174407.429817-1-alex.dewar90@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
The ark_pci_suspend() is not designed to function in the case of Freeze.
Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This
is because, in the legacy framework, this callback was invoked even in the
event of Freeze. Hence, added the load of unnecessary function-call.
The goal can be achieved by binding the callback with only ".suspend" and
".poweroff" in the "ark_pci_pm_ops" const variable. This also avoids the
step of checking "state.event == PM_EVENT_FREEZE" every time the callback
is invoked.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-13-vaibhavgupta40@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
The s3_pci_suspend() is not designed to function in the case of Freeze.
Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This
is because, in the legacy framework, this callback was invoked even in the
event of Freeze. Hence, added the load of unnecessary function-call.
The goal can be achieved by binding the callback with only ".suspend" and
".poweroff" in the "s3_pci_pm_ops" const variable. This also avoids the
step of checking "state.event == PM_EVENT_FREEZE" every time the callback
is invoked.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-12-vaibhavgupta40@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
The vt8623_pci_suspend() is not designed to function in the case of Freeze.
Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This
is because, in the legacy framework, this callback was invoked even in the
event of Freeze. Hence, added the load of unnecessary function-call.
The goal can be achieved by binding the callback with only ".suspend" and
".poweroff" in the "vt8623_pci_pm_ops" const variable. This also avoids the
step of checking "state.event == PM_EVENT_FREEZE" every time the callback
is invoked.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-11-vaibhavgupta40@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
The i740fb_suspend() is not designed to function in the case of Freeze.
Thus, the code checked for "if (state.event == PM_EVENT_FREEZE....)". This
is because, in the legacy framework, this callback was invoked even in the
event of Freeze. Hence, added the load of unnecessary function-call.
The goal can be achieved by binding the callback with only ".suspend" and
".poweroff" in the "i740fb_pm_ops" const variable. This also avoids the
step of checking "if (state.event == PM_EVENT_FREEZE....)" every time the
callback is invoked.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-10-vaibhavgupta40@gmail.com
|
|
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. This way we can
remove the legacy .suspend & .resume bindings from "lxfb_driver".
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-9-vaibhavgupta40@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
Now,
- savagefb_suspend() had a "pm_message_t" type parameter as per legacy
PCI PM framework that got deprecated in generic.
- Rename the callback as savagefb_suspend_late() and preserve the
parameter.
- Define 3 new callbacks as:
* savagefb_suspend()
* savagefb_freeze()
* savagefb_hibernate()
which in turn call savagefb_suspend_late() by passing appropriate value
for "pm_message_t" type parameter.
- Bind the callbacks in "struct dev_pm_ops" type variable
"savagefb_pm_ops".
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-8-vaibhavgupta40@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
Now,
- nvidiafb_suspend() had a "pm_message_t" type parameter as per legacy
PCI PM framework that got deprecated in generic.
- Rename the callback as nvidiafb_suspend_late() and preserve the
parameter.
- Define 3 new callbacks as:
* nvidiafb_suspend()
* nvidiafb_freeze()
* nvidiafb_hibernate()
which in turn call nvidiafb_suspend_late() by passing appropriate value
for "pm_message_t" type parameter.
- Bind the callbacks in "struct dev_pm_ops" type variable
"nvidiafb_pm_ops".
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-7-vaibhavgupta40@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
Now,
- aty128_pci_suspend() had a "pm_message_t" type parameter as per legacy
PCI PM framework that got deprecated in generic.
- Rename the callback as aty128_pci_suspend_late() and preserve the
parameter.
- Define 3 new callbacks as:
* aty128_pci_suspend()
* aty128_pci_freeze()
* aty128_pci_hibernate()
which in turn call aty128_pci_suspend_late() by passing appropriate
value for "pm_message_t" type parameter.
- Bind the callbacks in "struct dev_pm_ops" type variable
"aty128_pci_pm_ops".
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-6-vaibhavgupta40@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove
unnecessary calls to the PCI Helper functions along with the legacy
.suspend & .resume bindings.
Now,
- atyfb_pci_suspend() had a "pm_message_t" type parameter as per legacy
PCI PM framework, that got deprecated in generic.
- Rename the callback as atyfb_pci_suspend_late() and preserve the
parameter.
- Define 3 new callbacks as:
* atyfb_pci_suspend()
* atyfb_pci_freeze()
* atyfb_pci_hibernate()
which in turn call atyfb_pci_suspend_late() by passing appropriate
value for "pm_message_t" type parameter.
- Bind the callbacks in "struct dev_pm_ops" type variable
"atyfb_pci_pm_ops".
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-5-vaibhavgupta40@gmail.com
|
|
Drivers should do only device-specific jobs. But in general, drivers using
legacy PCI PM framework for .suspend()/.resume() have to manage many PCI
PM-related tasks themselves which can be done by PCI Core itself. This
brings extra load on the driver and it directly calls PCI helper functions
to handle them.
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks.
The via_suspend() is designed to function only in the case of Suspend.
Thus, the code checked for "if (state.event != PM_EVENT_SUSPEND)". This is
because, in the legacy framework, this callback was invoked even in the
event of Freeze and Hibernate. Hence, added the load of unnecessary
function-calls.
The goal can be achieved by binding the callback with only
"via_pm_ops.suspend" in the new framework. This also avoids the step of
checking "if (state.event != PM_EVENT_SUSPEND)" every time the callback is
invoked.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-4-vaibhavgupta40@gmail.com
|
|
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. This way we can
remove the legacy .suspend & .resume bindings from "lxfb_driver".
The lxfb_suspend() is designed to function only in the case of Suspend.
Thus, the code was kept inside "if (state.event == PM_EVENT_SUSPEND)"
container. This is because, in the legacy framework, this callback was
invoked even in the event of Freeze and Hibernate. Hence, added the load of
unnecessary function-calls.
The goal can be achieved by binding the callback with only
"lxfb_pm_ops.suspend" in the new framework. This also avoids the step of
checking "if (state.event == PM_EVENT_SUSPEND)" every time the callback is
invoked.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-3-vaibhavgupta40@gmail.com
|
|
Switch to the new generic framework by updating function signatures and
define a "struct dev_pm_ops" variable to bind PM callbacks. This way we can
remove the legacy .suspend & .resume bindings from "gxfb_driver".
The gxfb_suspend() is designed to function only in the case of Suspend.
Thus, the code was kept inside "if (state.event == PM_EVENT_SUSPEND)"
container. This is because, in the legacy framework, this callback was
invoked even in the event of Freeze and Hibernate. Hence, added the load of
unnecessary function-calls.
The goal can be achieved by binding the callback with only
"gxfb_pm_ops.suspend" in the new framework. This also avoids the step of
checking "if (state.event == PM_EVENT_SUSPEND)" every time the callback is
invoked.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bjorn@helgaas.com>
Cc: Vaibhav Gupta <vaibhav.varodek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andres Salomon <dilinger@queued.net>
CC: Antonino Daplas <adaplas@gmail.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200819185654.151170-2-vaibhavgupta40@gmail.com
|
|
Clang static analysis reports this representative error
init.c:2501:18: warning: Array access (from variable 'queuedata') results
in a null pointer dereference
templ |= ((queuedata[i] & 0xc0) << 3);
This is the problem block of code
if(ModeNo > 0x13) {
...
if(SiS_Pr->ChipType == SIS_730) {
queuedata = &FQBQData730[0];
} else {
queuedata = &FQBQData[0];
}
} else {
}
queuedata is not set in the else block
Reviewing the old code, the arrays FQBQData730 and FQBQData were
used directly.
So hoist the setting of queuedata out of the if-else block.
Fixes: 544393fe584d ("[PATCH] sisfb update")
Signed-off-by: Tom Rix <trix@redhat.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805145208.17727-1-trix@redhat.com
|
|
There is a spelling mistake in a pr_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805102805.15353-1-colin.king@canonical.com
|
|
This patch provides support for displays like VGM128064B0W10,
which requires a column offset of 2, i.e., its segments starts
in SEG2 and ends in SEG129.
Signed-off-by: Rodrigo Alencar <455.rodrigo.alencar@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1595622138-3965-1-git-send-email-455.rodrigo.alencar@gmail.com
|
|
The pixclock is being set locally because it is being passed as a
pass-by-value argument rather than pass-by-reference, so the computed
pixclock is never being set in var->pixclock. Fix this by passing
by reference.
[This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git ]
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
[b.zolnierkie: minor patch summary fixup]
[b.zolnierkie: removed "Fixes:" tag (not in upstream tree)]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200723170227.996229-1-colin.king@canonical.com
|
|
smtcfb_pci_probe() does not handle ioremap() errors for case 0x720. The
patch fixes that exactly like for case 0x710/2.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713080532.15504-1-novikov@ispras.ru
|
|
A fb_ioctl() FBIOPUT_VSCREENINFO call with invalid xres setting
or yres setting in struct fb_var_screeninfo will result in a
KASAN: vmalloc-out-of-bounds failure in bitfill_aligned() as
the margins are being cleared. The margins are cleared in
chunks and if the xres setting or yres setting is a value of
zero upto the chunk size, the failure will occur.
Add a margin check to validate xres and yres settings.
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dhaval Giani <dhaval.giani@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1594149963-13801-1-git-send-email-george.kennedy@oracle.com
|
|
Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"The majority of this batch is conversion of the PWM period and duty
cycle to 64-bit unsigned integers, which is required so that some
types of hardware can generate the full range of signals that they're
capable of.
The remainder is mostly minor fixes and cleanups"
* tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: bcm-iproc: handle clk_get_rate() return
pwm: Replace HTTP links with HTTPS ones
pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header
pwm: mediatek: Provide missing kerneldoc description for 'soc' arg
pwm: bcm-kona: Remove impossible comparison when validating duty cycle
pwm: bcm-iproc: Remove impossible comparison when validating duty cycle
pwm: iqs620a: Use lowercase hexadecimal literals for consistency
pwm: Convert period and duty cycle to u64
clk: pwm: Use 64-bit division function
backlight: pwm_bl: Use 64-bit division function
pwm: sun4i: Use nsecs_to_jiffies to avoid a division
pwm: sifive: Use 64-bit division macro
pwm: iqs620a: Use 64-bit division
pwm: imx27: Use 64-bit division macro
pwm: imx-tpm: Use 64-bit division macro
pwm: clps711x: Use 64-bit division macro
hwmon: pwm-fan: Use 64-bit division macro
drm/i915: Use 64-bit division macro
|
|
Pull drm fixes from Dave Airlie:
"This has a few vmwgfx regression fixes we hit from the merge window
(one in TTM), it also has a bunch of amdgpu fixes along with a
scattering everywhere else.
core:
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- re-added docs for drm_gem_flink_ioctl()
- add orientation quirk for ASUS T103HAF
ttm:
- ttm: fix page-offset calculation within TTM
- revert patch causing vmwgfx regressions
fbcon:
- Fix a fbcon OOB read in fbdev, found by syzbot.
vga:
- Mark vga_tryget static as it's not used elsewhere.
amdgpu:
- Re-add spelling typo fix
- Sienna Cichlid fixes
- Navy Flounder fixes
- DC fixes
- SMU i2c fix
- Power fixes
vmwgfx:
- regression fixes for modesetting crashes
- misc fixes
xlnx:
- Small fixes to xlnx.
omap:
- Fix mode initialization in omap_connector_mode_valid().
- force runtime PM suspend on system suspend
tidss:
- fix modeset init for DPI panels"
* tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drm: (70 commits)
drm/ttm: revert "drm/ttm: make TT creation purely optional v3"
drm/vmwgfx: fix spelling mistake "Cant" -> "Can't"
drm/vmwgfx: fix spelling mistake "Cound" -> "Could"
drm/vmwgfx/ldu: Use drm_mode_config_reset
drm/vmwgfx/sou: Use drm_mode_config_reset
drm/vmwgfx/stdu: Use drm_mode_config_reset
drm/vmwgfx: Fix two list_for_each loop exit tests
drm/vmwgfx: Use correct vmw_legacy_display_unit pointer
drm/vmwgfx: Use struct_size() helper
drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume
drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup(V3)
drm/amd/powerplay: update swSMU VCN/JPEG PG logics
drm/amdgpu: use mode1 reset by default for sienna_cichlid
drm/amdgpu/smu: rework i2c adpater registration
drm/amd/display: Display goes blank after inst
drm/amd/display: Change null plane state swizzle mode to 4kb_s
drm/amd/display: Use helper function to check for HDMI signal
drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sink
drm/amd/display: Fix logger context
drm/amd/display: populate new dml variable
...
|
|
Backmerging drm-next into drm-misc-next for nouveau and panel updates.
Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got
renamed to struct ttm_resource.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Core Framework:
- Trivial: Code refactoring
- New API backlight_is_blank()
- New API backlight_get_brightness()
- Additional/reworked documentation
- Remove 'extern' labels from prototypes
- Drop backlight_put()
- Staticify of_find_backlight()
Driver Removal:
- Removal of unused OT200 driver
- Removal of unused Generic Backlight driver
Fix-ups
- Bunch of W=1 warning fixes
- Convert to GPIO descriptors; sky81452
- Move platform data handling into driver; sky81452
- Remove superfluous code; lms501kf03
- Many instances of using new APIs"
* tag 'backlight-next-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (34 commits)
video: backlight: cr_bllcd: Remove unused variable 'intensity'
backlight: backlight: Make of_find_backlight static
backlight: backlight: Drop backlight_put()
backlight: Use backlight_get_brightness() throughout
backlight: jornada720_bl: Introduce backlight_is_blank()
backlight: gpio_backlight: Simplify update_status()
backlight: cr_bllcd: Introduce gpio-backlight semantics
backlight: as3711_bl: Simplify update_status
backlight: backlight: Introduce backlight_get_brightness()
doc-rst: Wire-up Backlight kernel-doc documentation
backlight: backlight: Add overview and update existing doc
backlight: backlight: Drop extern from prototypes
backlight: generic_bl: Remove this driver as it is unused
backlight: backlight: Document enums in backlight.h
backlight: backlight: Document inline functions in backlight.h
backlight: backlight: Improve backlight_device documentation
backlight: backlight: Improve backlight_properties documentation
backlight: backlight: Improve backlight_ops documentation
backlight: backlight: Add backlight_is_blank()
backlight: backlight: Refactor fb_notifier_callback()
...
|
|
I need to backmerge 5.8 as I've got a bunch of fixes sitting
on an rc7 base that I want to land.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next-fixes for v5.9-rc1:
- Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi
- Fix a fbcon OOB read in fbdev, found by syzbot.
- Mark vga_tryget static as it's not used elsewhere.
- Small fixes to xlnx.
- Remove null check for kfree in drm_dev_release.
- Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition.
- Fix mode initialization in omap_connector_mode_valid().
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b2043dad-f118-bd19-54a6-f23bf6264007@linux.intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the large set of TTY and Serial driver patches for 5.9-rc1.
Lots of bugfixes in here, thanks to syzbot fuzzing for serial and vt
and console code.
Other highlights include:
- much needed vt/vc code cleanup from Jiri Slaby
- 8250 driver fixes and additions
- various serial driver updates and feature enhancements
- locking cleanup for serial/console initializations
- other minor cleanups
All of these have been in linux-next with no reported issues"
* tag 'tty-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (90 commits)
MAINTAINERS: enlist Greg formally for console stuff
vgacon: Fix for missing check in scrollback handling
Revert "serial: 8250: Let serial core initialise spin lock"
serial: 8250: Let serial core initialise spin lock
tty: keyboard, do not speculate on func_table index
serial: stm32: Add RS485 RTS GPIO control
serial: 8250_dw: Fix common clocks usage race condition
serial: 8250_dw: Pass the same rate to the clk round and set rate methods
serial: 8250_dw: Simplify the ref clock rate setting procedure
serial: 8250: Add 8250 port clock update method
tty: serial: imx: add imx earlycon driver
tty: serial: imx: enable imx serial console port as module
tty/synclink: remove leftover bits of non-PCI card support
tty: Use the preferred form for passing the size of a structure type
tty: Fix identation issues in struct serial_struct32
tty: Avoid the use of one-element arrays
serial: msm_serial: add sparse context annotation
serial: pmac_zilog: add sparse context annotation
newport_con: vc_color is now in state
serial: imx: use hrtimers for rs485 delays
...
|
|
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
|
|
clang static analysis reports this repesentative error
pvr2fb.c:1049:2: warning: 1st function call argument
is an uninitialized value [core.CallAndMessage]
if (*cable_arg)
^~~~~~~~~~~~~~~
Problem is that cable_arg depends on the input loop to
set the cable_arg[0]. If it does not, then some random
value from the stack is used.
A similar problem exists for output_arg.
So initialize cable_arg and output_arg.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720191845.20115-1-trix@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull uninitialized_var() macro removal from Kees Cook:
"This is long overdue, and has hidden too many bugs over the years. The
series has several "by hand" fixes, and then a trivial treewide
replacement.
- Clean up non-trivial uses of uninitialized_var()
- Update documentation and checkpatch for uninitialized_var() removal
- Treewide removal of uninitialized_var()"
* tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
compiler: Remove uninitialized_var() macro
treewide: Remove uninitialized_var() usage
checkpatch: Remove awareness of uninitialized_var() macro
mm/debug_vm_pgtable: Remove uninitialized_var() usage
f2fs: Eliminate usage of uninitialized_var() macro
media: sur40: Remove uninitialized_var() usage
KVM: PPC: Book3S PR: Remove uninitialized_var() usage
clk: spear: Remove uninitialized_var() usage
clk: st: Remove uninitialized_var() usage
spi: davinci: Remove uninitialized_var() usage
ide: Remove uninitialized_var() usage
rtlwifi: rtl8192cu: Remove uninitialized_var() usage
b43: Remove uninitialized_var() usage
drbd: Remove uninitialized_var() usage
x86/mm/numa: Remove uninitialized_var() usage
docs: deprecated.rst: Add uninitialized_var()
|
|
vgacon_scrollback_update() always leaves enbough room in the scrollback
buffer for the next call, but if the console size changed that room
might not actually be enough, and so we need to re-check.
The check should be in the loop since vgacon_scrollback_cur->tail is
updated in the loop and count may be more than 1 when triggered by CSI M,
as Jiri's PoC:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <fcntl.h>
int main(int argc, char** argv)
{
int fd = open("/dev/tty1", O_RDWR);
unsigned short size[3] = {25, 200, 0};
ioctl(fd, 0x5609, size); // VT_RESIZE
write(fd, "\e[1;1H", 6);
for (int i = 0; i < 30; i++)
write(fd, "\e[10M", 5);
}
It leads to various crashes as vgacon_scrollback_update writes out of
the buffer:
BUG: unable to handle page fault for address: ffffc900001752a0
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:mutex_unlock+0x13/0x30
...
Call Trace:
n_tty_write+0x1a0/0x4d0
tty_write+0x1a0/0x2e0
Or to KASAN reports:
BUG: KASAN: slab-out-of-bounds in vgacon_scroll+0x57a/0x8ed
This fixes CVE-2020-14331.
Reported-by: 张云海 <zhangyunhai@nsfocus.com>
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Fixes: 15bdab959c9b ([PATCH] vgacon: Add support for soft scrollback)
Cc: stable@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Solar Designer <solar@openwall.com>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Yunhai Zhang <zhangyunhai@nsfocus.com>
Link: https://lore.kernel.org/r/9fb43895-ca91-9b07-ebfd-808cf854ca95@nsfocus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
syzbot is reporting OOB read bug in vc_do_resize() [1] caused by memcpy()
based on outdated old_{rows,row_size} values, for resize_screen() can
recurse into vc_do_resize() which changes vc->vc_{cols,rows} that outdates
old_{rows,row_size} values which were saved before calling resize_screen().
Daniel Vetter explained that resize_screen() should not recurse into
fbcon_update_vcs() path due to FBINFO_MISC_USEREVENT being still set
when calling resize_screen().
Instead of masking FBINFO_MISC_USEREVENT before calling fbcon_update_vcs(),
we can remove FBINFO_MISC_USEREVENT by calling fbcon_update_vcs() only if
fb_set_var() returned 0. This change assumes that it is harmless to call
fbcon_update_vcs() when fb_set_var() returned 0 without reaching
fb_notifier_call_chain().
[1] https://syzkaller.appspot.com/bug?id=c70c88cfd16dcf6e1d3c7f0ab8648b3144b5b25e
Reported-and-tested-by: syzbot <syzbot+c37a14770d51a085a520@syzkaller.appspotmail.com>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: kernel test robot <lkp@intel.com> for missing #include
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/075b7e37-3278-cd7d-31ab-c5073cfa8e92@i-love.sakura.ne.jp
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux
Pull unicore32 removal from Mike Rapoport:
"Remove unicore32 support.
The unicore32 port do not seem maintained for a long time now, there
is no upstream toolchain that can create unicore32 binaries and all
the links to prebuilt toolchains for unicore32 are dead. Even
compilers that were available are not supported by the kernel anymore.
Guenter Roeck says:
"I have stopped building unicore32 images since v4.19 since there is
no available compiler that is still supported by the kernel. I am
surprised that support for it has not been removed from the kernel"
However, it's worth pointing out two things:
- Guan Xuetao is still listed as maintainer and asked for the port to
be kept around the last time Arnd suggested removing it two years
ago. He promised that there would be compiler sources (presumably
llvm), but has not made those available since.
- https://github.com/gxt has patches to linux-4.9 and qemu-2.7, both
released in 2016, with patches dated early 2019. These patches
mainly restore a syscall ABI that was never part of mainline Linux
but apparently used in production. qemu-2.8 removed support for
that ABI and newer kernels (4.19+) can no longer be built with the
old toolchain, so apparently there will not be any future updates
to that git tree"
* tag 'rm-unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/linux:
MAINTAINERS: remove "PKUNITY SOC DRIVERS" entry
rtc: remove fb-puv3 driver
video: fbdev: remove fb-puv3 driver
pwm: remove pwm-puv3 driver
input: i8042: remove support for 8042-unicore32io
i2c/buses: remove i2c-puv3 driver
cpufreq: remove unicore32 driver
arch: remove unicore32 port
|
|
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200707210539.GA12530@embeddedor
|
|
The hdmi4.c and hdmi5.c files include the legacy GPIO
header <linux/gpio.h> but does not use any of the symbols
from this file.
What it does use is the implicit inclusion of <linux/of.h>
leading to compile errors if we just drop this include.
Include the right header.
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200706125931.752539-1-linus.walleij@linaro.org
|
|
Removes trailing whitespaces in several places.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729134148.6855-2-tzimmermann@suse.de
|
|
we need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit 28bc24fc46f9 (vc: separate state), vc->vc_color is known as
vc->state.color. Somehow both me and 0-day bot missed this driver during
the conversion.
So fix the driver now.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 28bc24fc46f9 ("vc: separate state")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200724062735.18229-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I've got a silent conflict + two trees based on fixes to merge.
Fixes a silent merge with amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
syzbot is reporting general protection fault in bitfill_aligned() [1]
caused by integer underflow in bit_clear_margins(). The cause of this
problem is when and how do_vc_resize() updates vc->vc_{cols,rows}.
If vc_do_resize() fails (e.g. kzalloc() fails) when var.xres or var.yres
is going to shrink, vc->vc_{cols,rows} will not be updated. This allows
bit_clear_margins() to see info->var.xres < (vc->vc_cols * cw) or
info->var.yres < (vc->vc_rows * ch). Unexpectedly large rw or bh will
try to overrun the __iomem region and causes general protection fault.
Also, vc_resize(vc, 0, 0) does not set vc->vc_{cols,rows} = 0 due to
new_cols = (cols ? cols : vc->vc_cols);
new_rows = (lines ? lines : vc->vc_rows);
exception. Since cols and lines are calculated as
cols = FBCON_SWAP(ops->rotate, info->var.xres, info->var.yres);
rows = FBCON_SWAP(ops->rotate, info->var.yres, info->var.xres);
cols /= vc->vc_font.width;
rows /= vc->vc_font.height;
vc_resize(vc, cols, rows);
in fbcon_modechanged(), var.xres < vc->vc_font.width makes cols = 0
and var.yres < vc->vc_font.height makes rows = 0. This means that
const int fd = open("/dev/fb0", O_ACCMODE);
struct fb_var_screeninfo var = { };
ioctl(fd, FBIOGET_VSCREENINFO, &var);
var.xres = var.yres = 1;
ioctl(fd, FBIOPUT_VSCREENINFO, &var);
easily reproduces integer underflow bug explained above.
Of course, callers of vc_resize() are not handling vc_do_resize() failure
is bad. But we can't avoid vc_resize(vc, 0, 0) which returns 0. Therefore,
as a band-aid workaround, this patch checks integer underflow in
"struct fbcon_ops"->clear_margins call, assuming that
vc->vc_cols * vc->vc_font.width and vc->vc_rows * vc->vc_font.heigh do not
cause integer overflow.
[1] https://syzkaller.appspot.com/bug?id=a565882df74fa76f10d3a6fec4be31098dbb37c6
Reported-and-tested-by: syzbot <syzbot+e5fd3e65515b48c02a30@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200715015102.3814-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes the following kernel build warning:
drivers/video/backlight/cr_bllcd.c: In function ‘cr_backlight_set_intensity’:
drivers/video/backlight/cr_bllcd.c:62:6: warning: unused variable ‘intensity’ [-Wunused-variable]
62 | int intensity = bd->props.brightness;
| ^~~~~~~~~
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Fixes: 24d34617c24f ("backlight: cr_bllcd: Introduce gpio-backlight semantics")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200719203714.61745-1-grandmaster@al2klimov.de
|