| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Enable this driver for Xilinx ZynqMP.
Signed-off-by: Michal Simek <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Paul Burton <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
All reported by from checkpatch
./scripts/checkpatch.pl --max-line-length 120 -strict -f
drivers/video/fbdev/xilinxfb.c
WARNING: Block comments should align the * on each line
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: please, no space before tabs
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
WARNING: Missing a blank line after declarations
WARNING: struct of_device_id should normally be const
CHECK: Please don't use multiple blank lines
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Alignment should match open parenthesis
CHECK: 'Endianess' may be misspelled - perhaps 'Endianness'?
CHECK: spaces preferred around that '*' (ctx:VxV)
ERROR: that open brace { should be on the previous line
Signed-off-by: Hyun Kwon <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Cc: Soren Brinkmann <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Steve Glendinning <[email protected]>
Cc: Bernie Thompson <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
usb_device_id are not supposed to change at runtime. All functions
working with usb_device_id provided by <linux/usb.h> work with
const usb_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Steve Glendinning <[email protected]>
Cc: Bernie Thompson <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
On UEFI systems, the firmware may expose a Graphics Output Protocol (GOP)
instance to which the efifb driver attempts to attach in order to provide
a minimal, unaccelerated framebuffer. The GOP protocol itself is not very
sophisticated, and only describes the offset and size of the framebuffer
in memory, and the pixel format.
If the GOP framebuffer is provided by a PCI device, it will have been
configured and enabled by the UEFI firmware, and the GOP protocol will
simply point into a live BAR region. However, the GOP protocol itself does
not describe this relation, and so we have to take care not to reconfigure
the BAR without taking efifb's dependency on it into account.
Commit:
55d728a40d36 ("efi/fb: Avoid reconfiguration of BAR that covers the framebuffer")
attempted to do so by claiming the BAR resource early on, which prevents the
PCI resource allocation routines from changing it. However, it turns out
that this only works if the PCI device is not behind any bridges, since
the bridge resources need to be claimed first.
So instead, allow the BAR to be moved, but make the efifb driver deal
with that gracefully. So record the resource that covers the BAR early
on, and if it turns out to have moved by the time we probe the efifb
driver, update the framebuffer address accordingly.
While this is less likely to occur on x86, given that the firmware's
PCI resource allocation is more likely to be preserved, this is a
worthwhile sanity check to have in place, and so let's remove the
preprocessor conditional that makes it !X86 only.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Peter Jones <[email protected]>
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
vt8623_timing_regs is only passed as the first argument to
svga_check_timings and as the second argument to svga_set_timings,
both of which are const. So make vt8623_timing_regs const also.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Cc: Bhumika Goyal <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file or
device_{remove/create}_bin_file. The corresponding arguments are of
type const, so declare the structures to be const.
Signed-off-by: Bhumika Goyal <[email protected]>
Cc: Julia Lawall <[email protected]>
Cc: Bernie Thompson <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
Make const xilinx_fb_default_pdata structure that is only copied into
other structure.
Signed-off-by: Julia Lawall <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Soren Brinkmann <[email protected]>,
[b.zolnierkie: split from a bigger patch]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
This adds a new command line option to select the fbcon margin color.
The motivation for this is screens where black does not blend into the
physical surroundings of the screen. For example, using an LCD (not the
backlit kind), white text on a black background is hard to read, so
inverting the colors is preferred. However, when you do this, most of the
screen is filled with white but the margins are still filled with black.
This makes a big, black, backwards 'L' on the screen. By setting
fbcon=margin:7, the margins will be filled with white and the LCD looks as
expected.
Signed-off-by: David Lechner <[email protected]>
[b.zolnierkie: ported over fbcon changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
This check is needed in the case where the width of the framebuffer
is not a multiple of 8 pixels. For example, LEGO MINDSTORMS EV3 has
a 178x128 1bpp display.
Signed-off-by: David Lechner <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
Some x86 clamshell design devices use portrait tablet screens and a
display engine which cannot rotate in hardware, so we need to rotate
the fbcon to compensate.
This commit adds a DMI based quirk table which is initially populated with
4 such devices: The Asus T100HA, GPD Pocket, the GPD win and the I.T.Works
TW891, so that the console comes up in the right orientation on these
devices OOTB.
Unfortunately these (cheap) devices also typically have quite generic DMI
data, so we match on a combination of DMI data, screen resolution and a
list of known BIOS dates to avoid false positives.
Suggested-by: Jean Delvare <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Jean Delvare <[email protected]>
[b.zolnierkie: ported over fbcon changes]
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
The HDMI audio driver only needs to know which generation of HDMI
transmitter it deals with, not the detailed SoC model. Pass the version
number as an integer to prepare for removal of the OMAP SoC version from
the omapdrm driver.
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
|
|
include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
|
|
The variable has become unused in modular configurations
which triggers a harmless warning:
drivers/video/fbdev/matrox/matroxfb_base.c:1583:12: error: 'hotplug' defined but not used [-Werror=unused-variable]
This moves it into an #ifdef section of the file, matching
all its references.
Fixes: 376b3ff54c9a ("fbdev: Nuke FBINFO_MODULE")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: Arvind Yadav <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
Now that we have a custom printf format specifier, convert users of
full_name to use %pOF instead. This is preparation to remove storing
of the full path string for each node.
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
Instead check info->ops->owner, which amounts to the same.
Spotted because I want to remove the pile of broken and cargo-culted
fb_info->flags assignments in drm drivers.
Signed-off-by: Daniel Vetter <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
There's a bunch of folks who're trying to make printk less
contended and faster, but there's a problem: printk uses the
console_lock, and the console lock has become the BKL for all things
fbdev/fbcon, which in turn pulled in half the drm subsystem under that
lock. That's awkward.
There reasons for that is probably just a historical accident:
- fbcon is a runtime option of fbdev, i.e. at runtime you can pick
whether your fbdev driver instances are used as kernel consoles.
Unfortunately this wasn't implemented with some module option, but
through some module loading magic: As long as you don't load
fbcon.ko, there's no fbdev console support, but loading it (in any
order wrt fbdev drivers) will create console instances for all fbdev
drivers.
- This was implemented through a notifier chain. fbcon.ko enumerates
all fbdev instances at load time and also registers itself as
listener in the fbdev notifier. The fbdev core tries to register new
fbdev instances with fbcon using the notifier.
- On top of that the modifier chain is also used at runtime by the
fbdev subsystem to e.g. control backlights for panels.
- The problem is that the notifier puts a mutex locking context
between fbdev and fbcon, which mixes up the locking contexts for
both the runtime usage and the register time usage to notify fbcon.
And at runtime fbcon (through the fbdev core) might call into the
notifier from a printk critical section while console_lock is held.
- This means console_lock must be an outer lock for the entire fbdev
subsystem, which also means it must be acquired when registering a
new framebuffer driver as the outermost lock since we might call
into fbcon (through the notifier) which would result in a locking
inversion if fbcon would acquire the console_lock from its notifier
callback (which it needs to register the console).
- console_lock can be held anywhere, since printk can be called
anywhere, and through the above story, plus drm/kms being an fbdev
driver, we pull in a shocking amount of locking hiercharchy
underneath the console_lock. Which makes cleaning up printk really
hard (not even splitting console_lock into an rwsem is all that
useful due to this).
There's various ways to address this, but the cleanest would be to
make fbcon a compile-time option, where fbdev directly calls the fbcon
register functions from register_framebuffer, or dummy static inline
versions if fbcon is disabled. Maybe augmented with a runtime knob to
disable fbcon, if that's needed (for debugging perhaps).
But this could break some users who rely on the magic "loading
fbcon.ko enables/disables fbdev framebuffers at runtime" thing, even
if that's unlikely. Hence we must be careful:
1. Create a compile-time dependency between fbcon and fbdev in the
least minimal way. This is what this patch does.
2. Wait at least 1 year to give possible users time to scream about
how we broke their setup. Unlikely, since all distros make fbcon
compile-in, and embedded platforms only compile stuff they know they
need anyway. But still.
3. Convert the notifier to direct functions calls, with dummy static
inlines if fbcon is disabled. We'll still need the fb notifier for the
other uses (like backlights), but we can probably move it into the fb
core (atm it must be built-into vmlinux).
4. Push console_lock down the call-chain, until it is down in
console_register again.
5. Finally start to clean up and rework the printk/console locking.
For context of this saga see
commit 50e244cc793d511b86adea24972f3a7264cae114
Author: Alan Cox <[email protected]>
Date: Fri Jan 25 10:28:15 2013 +1000
fb: rework locking to fix lock ordering on takeover
plus the pile of commits on top that tried to make this all work
without terminally upsetting lockdep. We've uncovered all this when
console_lock lockdep annotations where added in
commit daee779718a319ff9f83e1ba3339334ac650bb22
Author: Daniel Vetter <[email protected]>
Date: Sat Sep 22 19:52:11 2012 +0200
console: implement lockdep support for console_lock
On the patch itself:
- Switch CONFIG_FRAMEBUFFER_CONSOLE to be a boolean, using the overall
CONFIG_FB tristate to decided whether it should be a module or
built-in.
- At first I thought I could force the build depency with just a dummy
symbol that fbcon.ko exports and fb.ko uses. But that leads to a
module depency cycle (it works fine when built-in).
Since this tight binding is the entire goal the simplest solution is
to move all the fbcon modules (and there's a bunch of optinal
source-files which are each modules of their own, for no good
reason) into the overall fb.ko core module. That's a bit more than
what I would have liked to do in this patch, but oh well.
Signed-off-by: Daniel Vetter <[email protected]>
Cc: Alan Cox <[email protected]>
Cc: Sergey Senozhatsky <[email protected]>
Cc: Steven Rostedt <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
11790 1913 0 13703 3587 drivers/video/fbdev/vt8623fb.o
File size after adding 'const':
text data bss dec hex filename
11854 1849 0 13703 3587 drivers/video/fbdev/vt8623fb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
19884 3036 96 23016 59e8 fbdev/matrox/matroxfb_base.o
File size after adding 'const':
text data bss dec hex filename
20300 2620 96 23016 59e8 fbdev/matrox/matroxfb_base.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
10332 596 16 10944 2ac0 drivers/video/fbdev/pm3fb.o
File size after adding 'const':
text data bss dec hex filename
10396 532 16 10944 2ac0 drivers/video/fbdev/pm3fb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
20994 2440 8 23442 5b92 drivers/video/fbdev/s3fb.o
File size after adding 'const':
text data bss dec hex filename
21506 1928 8 23442 5b92 drivers/video/fbdev/s3fb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
12766 1064 21 13851 361b drivers/video/fbdev/neofb.o
File size after adding 'const':
text data bss dec hex filename
13086 744 21 13851 361b drivers/video/fbdev/neofb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
2643 1616 16 4275 10b3 video/fbdev/geode/gxfb_core.o
File size after adding 'const':
text data bss dec hex filename
2707 1552 16 4275 10b3 video/fbdev/geode/gxfb_core.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
11940 660 16 12616 3148 drivers/video/fbdev/pm2fb.o
File size after adding 'const':
text data bss dec hex filename
12068 532 16 12616 3148 drivers/video/fbdev/pm2fb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
6736 856 0 7592 1da8 drivers/video/fbdev/imsttfb.o
File size after adding 'const':
text data bss dec hex filename
6832 760 0 7592 1da8 drivers/video/fbdev/imsttfb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
170 488 0 658 292 drivers/video/fbdev/sunxvr500.o
File size after adding 'const':
text data bss dec hex filename
394 264 0 658 292 drivers/video/fbdev/sunxvr500.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
8432 1456 16 9904 26b0 drivers/video/fbdev/tdfxfb.o
File size after adding 'const':
text data bss dec hex filename
8560 1328 16 9904 26b0 drivers/video/fbdev/tdfxfb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
7326 1320 0 8646 21c6 fbdev/mb862xx/mb862xxfbdrv.o
File size after adding 'const':
text data bss dec hex filename
7454 1192 0 8646 21c6 fbdev/mb862xx/mb862xxfbdrv.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
12149 768 36 12953 3299 video/fbdev/nvidia/nvidia.o
File size after adding 'const':
text data bss dec hex filename
12213 704 36 12953 3299 video/fbdev/nvidia/nvidia.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
7953 568 96 8617 21a9 fbdev/vermilion/vermilion.o
File size after adding 'const':
text data bss dec hex filename
8017 504 96 8617 21a9 fbdev/vermilion/vermilion.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
3190 2704 24 5918 171e video/fbdev/kyro/fbdev.o
File size after adding 'const':
text data bss dec hex filename
3290 2640 24 5918 171e video/fbdev/kyro/fbdev.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
12511 1920 0 14431 385f drivers/video/fbdev/arkfb.o
File size after adding 'const':
text data bss dec hex filename
12607 1824 0 14431 385f drivers/video/fbdev/arkfb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
13132 520 56 13708 358c video/fbdev/i810/i810_main.o
File size after adding 'const':
text data bss dec hex filename
13356 296 56 13708 358c video/fbdev/i810/i810_main.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
13285 2080 3 15368 3c08 video/fbdev/riva/fbdev.o
File size after adding 'const':
text data bss dec hex filename
14677 688 3 15368 3c08 video/fbdev/riva/fbdev.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
19916 1240 8 21164 52ac fbdev/savage/savagefb_driver.o
File size after adding 'const':
text data bss dec hex filename
20684 472 8 21164 52ac fbdev/savage/savagefb_driver.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
3856 968 128 4952 1358 video/fbdev/via/via-core.o
File size after adding 'const':
text data bss dec hex filename
4304 520 128 4952 1358 video/fbdev/via/via-core.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
13206 1232 40 14478 388e video/fbdev/tridentfb.o
File size after adding 'const':
text data bss dec hex filename
13910 528 40 14478 388e video/fbdev/tridentfb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
5155 1312 40 6507 196b drivers/video/fbdev/pvr2fb.o
File size after adding 'const':
text data bss dec hex filename
5219 1248 40 6507 196b drivers/video/fbdev/pvr2fb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
11749 896 24 12669 317d video/fbdev/intelfb/intelfbdrv.o
File size after adding 'const':
text data bss dec hex filename
12173 472 24 12669 317d video/fbdev/intelfb/intelfbdrv.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
4703 512 0 5215 145f drivers/video/fbdev/asiliantfb.o
File size after adding 'const':
text data bss dec hex filename
4767 448 0 5215 145f drivers/video/fbdev/asiliantfb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
390 552 0 942 3ae drivers/video/fbdev/sunxvr2500.o
File size after adding 'const':
text data bss dec hex filename
686 256 0 942 3ae drivers/video/fbdev/sunxvr2500.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
11525 2048 8 13581 350d video/fbdev/aty/aty128fb.o
File size after adding 'const':
text data bss dec hex filename
13061 512 8 13581 350d video/fbdev/aty/aty128fb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
17534 1824 48 19406 4bce video/fbdev/aty/atyfb_base.o
File size after adding 'const':
text data bss dec hex filename
18686 672 48 19406 4bce video/fbdev/aty/atyfb_base.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
19709 5024 32 24765 60bd video/fbdev/aty/radeon_base.o
File size after adding 'const':
text data bss dec hex filename
22893 1840 32 24765 60bd video/fbdev/aty/radeon_base.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Antonino Daplas <[email protected]>
Cc: Maik Broemme <[email protected]>
Cc: Florian Tobias Schandinat <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
5227 560 0 5787 169b panel-sony-acx565akm
File size after adding 'const':
text data bss dec hex filename
5291 496 0 5787 169b panel-sony-acx565akm.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
2673 368 0 3041 be1 panel-tpo-td043mtea1.o
File size after adding 'const':
text data bss dec hex filename
2737 304 0 3041 be1 panel-tpo-td043mtea1.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
attribute_group are not supposed to change at runtime. All functions
working with attribute_group provided by <linux/sysfs.h> work
with const attribute_group. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
15426 4952 187 20565 5055 drivers/video/fbdev/uvesafb.o
File size after adding 'const':
text data bss dec hex filename
15490 4888 187 20565 5055 drivers/video/fbdev/uvesafb.o
Signed-off-by: Arvind Yadav <[email protected]>
Cc: Michal Januszewski <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
This dev_pm_ops structure is only stored in the pm field of a
device_driver structure. This field is declared const, so
dev_pm_ops structures that have this property can be declared
as const also.
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|
|
Drop static on a local variable, when the variable is initialized before
any possible use. Thus, the static has no benefit.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@bad exists@
position p;
identifier x;
type T;
@@
static T x@p;
...
x = <+...x...+>
@@
identifier x;
expression e;
type T;
position p != bad.p;
@@
-static
T x@p;
... when != x
when strict
?x = e;
// </smpl>
Signed-off-by: Julia Lawall <[email protected]>
Cc: Kees Cook <[email protected]>
Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
|