aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2021-08-27usb: gadget: u_audio: fix race condition on endpoint stopJerome Brunet1-4/+4
If the endpoint completion callback is call right after the ep_enabled flag is cleared and before usb_ep_dequeue() is call, we could do a double free on the request and the associated buffer. Fix this by clearing ep_enabled after all the endpoint requests have been dequeued. Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback") Cc: stable <[email protected]> Reported-by: Thinh Nguyen <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-27usb: gadget: f_uac2: fixup feedback endpoint stopJerome Brunet1-4/+11
When the uac2 function is stopped, there seems to be an issue reported on some platforms (Intel Merrifield at least) BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0 ... Call Trace: dwc3_remove_requests.constprop.0+0x12f/0x170 __dwc3_gadget_ep_disable+0x7a/0x160 dwc3_gadget_ep_disable+0x3d/0xd0 usb_ep_disable+0x1c/0x70 u_audio_stop_capture+0x79/0x120 [u_audio] afunc_set_alt+0x73/0x80 [usb_f_uac2] composite_setup+0x224/0x1b90 [libcomposite] The issue happens only when the gadget is using the sync type "async", not "adaptive". This indicates that problem is coming from the feedback endpoint, which is only used with async synchronization mode. The problem is that request is freed regardless of usb_ep_dequeue(), which ends up badly if the request is not actually dequeued yet. Update the feedback endpoint free function to release the endpoint the same way it is done for the data endpoint, which takes care of the problem. Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Reported-by: Ferry Toth <[email protected]> Tested-by: Ferry Toth <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-27usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"Colin Ian King1-2/+2
There are spelling mistakes in a comment and a literal string. Fix them. Reviewed-by: Guenter Roeck <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-27usb: dwc2: Fix spelling mistake "was't" -> "wasn't"Colin Ian King1-1/+1
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-27usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err error message. Fix it. Reviewed-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-27usb: host: xhci-rcar: Don't reload firmware after the completionYoshihiro Shimoda1-0/+7
According to the datasheet, "Upon the completion of FW Download, there is no need to write or reload FW.". Otherwise, it's possible to cause unexpected behaviors. So, adds such a condition. Fixes: 4ac8918f3a73 ("usb: host: xhci-plat: add support for the R-Car H2 and M2 xHCI controllers") Cc: [email protected] # v3.17+ Signed-off-by: Yoshihiro Shimoda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-27usb: xhci-mtk: allow bandwidth table rolloverChunfeng Yun2-39/+18
xhci-mtk has 64 slots for periodic bandwidth calculations and each slot represents byte budgets on a microframe. When an endpoint's allocation sits on the boundary of the table, byte budgets' slot can be rolled over but the current implementation doesn't. This patch allows the microframe index rollover and prevent out-of-bounds array access. Signed-off-by: Ikjoon Jang <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-27Merge tag 'usb-v5.15-rc1' of ↵Greg Kroah-Hartman1-3/+11
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Only one patch for improving port index calculation for chipidea driver, no big changes. * tag 'usb-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: host: fix port index underflow and UBSAN complains
2021-08-26usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is runningKyle Tso1-43/+38
If the port is going to send Discover_Identity Message, vdm_sm_running flag was intentionally set before entering Ready States in order to avoid the conflict because the port and the port partner might start AMS at almost the same time after entering Ready States. However, the original design has a problem. When the port is doing DR_SWAP from Device to Host, it raises the flag. Later in the tcpm_send_discover_work, the flag blocks the procedure of sending the Discover_Identity and it might never be cleared until disconnection. Since there exists another flag send_discover representing that the port is going to send Discover_Identity or not, it is enough to use that flag to prevent the conflict. Also change the timing of the set/clear of vdm_sm_running to indicate whether the VDM SM is actually running or not. Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: stable <[email protected]> Cc: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Kyle Tso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: renesas-xhci: Prefer firmware loading on unknown ROM stateTakashi Iwai1-12/+23
The recent attempt to handle an unknown ROM state in the commit d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") resulted in a regression and reverted later by the commit 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state""). The problem of the former fix was that it treated the failure of firmware loading as a fatal error. Since the firmware files aren't included in the standard linux-firmware tree, most users don't have them, hence they got the non-working system after that. The revert fixed the regression, but also it didn't make the firmware loading triggered even on the devices that do need it. So we need still a fix for them. This is another attempt to handle the unknown ROM state. Like the previous fix, this also tries to load the firmware when ROM shows unknown state. In this patch, however, the failure of a firmware loading (such as a missing firmware file) isn't handled as a fatal error any longer when ROM has been already detected, but it falls back to the ROM mode like before. The error is returned only when no ROM is detected and the firmware loading failed. Along with it, for simplifying the code flow, the detection and the check of ROM is factored out from renesas_fw_check_running() and done in the caller side, renesas_xhci_check_request_fw(). It avoids the redundant ROM checks. The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34). Also it was confirmed that no regression is seen on another Thinkpad T14 machine that has worked without the patch, too. Fixes: 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"") Cc: stable <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1189207 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: dwc3: gadget: Stop EP0 transfers during pullup disableWesley Cheng1-4/+3
During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error: dwc3 a600000.dwc3: timed out waiting for SETUP phase If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete. Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS stage. Fixes: bb0147364850 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so") Cc: <[email protected]> Reviewed-by: Thinh Nguyen <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Wesley Cheng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: dwc3: gadget: Fix dwc3_calc_trbs_left()Thinh Nguyen1-8/+8
We can't depend on the TRB's HWO bit to determine if the TRB ring is "full". A TRB is only available when the driver had processed it, not when the controller consumed and relinquished the TRB's ownership to the driver. Otherwise, the driver may overwrite unprocessed TRBs. This can happen when many transfer events accumulate and the system is slow to process them and/or when there are too many small requests. If a request is in the started_list, that means there is one or more unprocessed TRBs remained. Check this instead of the TRB's HWO bit whether the TRB ring is full. Fixes: c4233573f6ee ("usb: dwc3: gadget: prepare TRBs on update transfers too") Cc: <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: mtu3: fix random remote wakeupChunfeng Yun2-1/+4
Some platforms, e.g. 8183/8192, use low level latch way to keep wakeup signal, it may latch a wrong signal if debounce more time, and enable wakeup earlier. ____________________ ip_sleep ____/ \__________ ___________________ wakeup_signal ____________/ \______ _______________________________ wakeup_en _______/ ^ ^ |(1) |(2) latch wakeup_signal mistakenly at (1), should latch it at (2); Workaround: delay about 100us to enable wakeup, meanwhile decrease debounce time. Fixes: b1a344589eea ("usb: mtu3: support ip-sleep wakeup for MT8183") Cc: [email protected] Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: mtu3: return successful suspend statusChunfeng Yun1-0/+1
Forgot 'return 0;' when suspend successfully, make the mistake when I split patches. Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode") Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpointChunfeng Yun2-51/+60
xhci-mtk depends on xhci's internal virt_dev when it retrieves its internal data from usb_host_endpoint both in add_endpoint and drop_endpoint callbacks. But when setup packet was retired by transaction errors in xhci_setup_device() path, a virt_dev for the slot is newly created with real_port 0. This leads to xhci-mtks's NULL pointer dereference from drop_endpoint callback as xhci-mtk assumes that virt_dev's real_port is always started from one. The similar problems were addressed by [1] but that can't cover the failure cases from setup_device. This patch drops the usages of xhci's virt_dev in xhci-mtk's drop_endpoint callback by adopting hashtable for searching mtk's schedule entity from a given usb_host_endpoint pointer instead of searching a linked list. So mtk's drop_endpoint callback doesn't have to rely on virt_dev at all. [1] f351f4b63dac ("usb: xhci-mtk: fix oops when unbind driver") Signed-off-by: Ikjoon Jang <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: xhci-mtk: modify the SOF/ITP interval for mt8195Chunfeng Yun1-0/+65
There are 4 USB controllers on MT8195, the controllers (IP1~IP3, exclude IP0) have a wrong default SOF/ITP interval which is calculated from the frame counter clock 24Mhz by default, but in fact, the frame counter clock is 48Mhz, so we should set the accurate interval according to 48Mhz for those controllers. Note: the first controller no need set it. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: xhci-mtk: add a member of num_esitChunfeng Yun2-13/+9
Add a member num_esit to save the number of esit, then no need caculate it in some functions. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: xhci-mtk: check boundary before check ttChunfeng Yun1-3/+4
check_sch_tt() will access fs_bus_bw[] array, check boundary firstly to avoid out-of-bounds issue. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: xhci-mtk: update fs bus bandwidth by bw_budget_tableChunfeng Yun1-10/+7
Use @bw_budget_table[] to update fs bus bandwidth due to not all microframes consume @bw_cost_per_microframe, see setup_sch_info(). Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: xhci-mtk: fix issue of out-of-bounds array accessChunfeng Yun1-4/+6
Bus bandwidth array access is based on esit, increase one will cause out-of-bounds issue; for example, when esit is XHCI_MTK_MAX_ESIT, will overstep boundary. Fixes: 7c986fbc16ae ("usb: xhci-mtk: get the microframe boundary for ESIT") Cc: <[email protected]> Reported-by: Stan Lu <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: xhci-mtk: support option to disable usb2 portsChunfeng Yun2-2/+11
Add support to disable specific usb2 host ports, it's useful when a usb2 port is disabled on some platforms, but enabled on others for the same SoC. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: xhci-mtk: fix use-after-free of mtk->hcdChunfeng Yun1-1/+1
BUG: KASAN: use-after-free in usb_hcd_is_primary_hcd+0x38/0x60 Call trace: dump_backtrace+0x0/0x3dc show_stack+0x20/0x2c dump_stack+0x15c/0x1d4 print_address_description+0x7c/0x510 kasan_report+0x164/0x1ac __asan_report_load8_noabort+0x44/0x50 usb_hcd_is_primary_hcd+0x38/0x60 xhci_mtk_runtime_suspend+0x68/0x148 pm_generic_runtime_suspend+0x90/0xac __rpm_callback+0xb8/0x1f4 rpm_callback+0x54/0x1d0 rpm_suspend+0x4e0/0xc84 __pm_runtime_suspend+0xc4/0x114 xhci_mtk_probe+0xa58/0xd00 This may happen when probe fails, needn't suspend it synchronously, fix it by using pm_runtime_put_noidle(). Reported-by: Pi Hsun <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: bdc: Fix a resource leak in the error handling path of 'bdc_probe()'Christophe JAILLET1-14/+13
If an error occurs after a successful 'clk_prepare_enable()' call, it must be undone by a corresponding 'clk_disable_unprepare()' call. This call is already present in the remove function. Add this call in the error handling path and reorder the code so that the 'clk_prepare_enable()' call happens later in the function. The goal is to have as much managed resources functions as possible before the 'clk_prepare_enable()' call in order to keep the error handling path simple. While at it, remove the now unneeded 'clk' variable. Fixes: c87dca047849 ("usb: bdc: Add clock enable for new chips with a separate BDC clock") Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/f8a4a6897deb0c8cb2e576580790303550f15fcd.1629314734.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: bdc: Fix an error handling path in 'bdc_probe()' when no suitable DMA ↵Christophe JAILLET1-1/+2
config is available If no suitable DMA configuration is available, a previous 'bdc_phy_init()' call must be undone by a corresponding 'bdc_phy_exit()' call. Branch to the existing error handling path instead of returning directly. Fixes: cc29d4f67757 ("usb: bdc: Add support for USB phy") Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/0c5910979f39225d5d8fe68c9ab1c147c68ddee1.1629314734.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26Revert "usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint"Chunfeng Yun2-86/+69
I find the patch introduce some issues, e.g. 1. oops happens when xhci_gen_setup() failed, and hash is not init but try to destroy it; 2. memory leakage happens when fail to insert ep, need free sch_ep, or insert ep after insert int list; 3. memory leakage happens when fail to allocate sch_array, need destroy rhashtable; 4. it's better to check ep->hcpriv when drop ep; so prefer to revert this patch, and resend it after the issues are fixed. This reverts commit b8731209958a1dffccc2888121f4c0280c990550. Cc: Ikjoon Jang <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26Revert "usb: xhci-mtk: relax TT periodic bandwidth allocation"Chunfeng Yun1-13/+7
As discussed in following patch: https://patchwork.kernel.org/patch/12420339 No need calculate number of uframes again, but should use value form check_sch_tt(), if we plan to remove extra CS, also can do it in check_sch_tt(). So revert this patch, and prepare to send new patch for it. This reverts commit 548011957d1d72e0b662300c8b32b81d593b796e. Cc: Ikjoon Jang <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: isp1760: clean never read udc_enabled warningRui Miguel Silva1-2/+2
When CONFIG_USB_ISP1761_UDC is not enabled the udc_enabled variable is never used since it is short circuited before in the logic operations. This would trigger the following warning by clang analyzer: drivers/usb/isp1760/isp1760-core.c:490:2: warning: Value stored to 'udc_enabled' is never read [clang-analyzer-deadcode.DeadStores] udc_enabled = ((devflags & ISP1760_FLAG_ISP1763) || ^ drivers/usb/isp1760/isp1760-core.c:490:2: note: Value stored to 'udc_enabled' is never read Just swap the other of the operands in the logic operations. Signed-off-by: Rui Miguel Silva <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: isp1760: do not shift in uninitialized slotRui Miguel Silva1-7/+11
Even though it is not expected, and would trigger a WARN_ON, killing a transfer in a uninitialized slot this sequence is warned by clang analyzer, twice: drivers/usb/isp1760/isp1760-hcd.c:1976:18: warning: The result of the left shift is undefined because the right operand is negative [clang-analyzer-core.UndefinedBinaryOperatorResult] skip_map |= (1 << qh->slot); drivers/usb/isp1760/isp1760-hcd.c:1983:18: warning: The result of the left shift is undefined because the right operand is negative [clang-analyzer-core.UndefinedBinaryOperatorResult] skip_map |= (1 << qh->slot); Only set skip map if slot is active. Signed-off-by: Rui Miguel Silva <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: isp1760: do not reset retvalRui Miguel Silva1-1/+0
We do not really need to reset retval before get used bellow. This will avoid the clang-analyzer warning: drivers/usb/isp1760/isp1760-hcd.c:1919:2: warning: Value stored to 'retval' is never read [clang-analyzer-deadcode.DeadStores] retval = 0; Signed-off-by: Rui Miguel Silva <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: isp1760: check maxpacketsize before using itRui Miguel Silva1-1/+1
When checking if we need one more packet on a bulk pipe we may, even though not probable at all, get there with a zero maxpacketsize. In that case for sure no packet, no even a one more, will be allocated. This will clean the clang-analyzer warning: drivers/usb/isp1760/isp1760-hcd.c:1856:38: warning: Division by zero [clang-analyzer-core.DivideZero] && !(urb->transfer_buffer_length % Signed-off-by: Rui Miguel Silva <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: isp1760: ignore return value for bus change patternRui Miguel Silva1-3/+7
We do not care about the return value of that read between the scratch register write and read, we really just want to make sure that the pattern in the bus get changed to make sure we are testing correctly the scratch pattern. Clang-analyzer complains about the never read scratch variable: >> drivers/usb/isp1760/isp1760-hcd.c:735:2: warning: Value stored to 'scratch' is never read [clang-analyzer-deadcode.DeadStores] scratch = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH); Just ignore the return value of that CHIP_ID_HIGH read, add more information to the comment above why we are doing this. And as at it, just do a small format change in the error message bellow. Signed-off-by: Rui Miguel Silva <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: gadget: Add description for module parameterWei Ming Chen1-0/+1
The description for "qlen" is missing, and there is a description for this parameter in "Documentation/usb/gadget_printer.rst" Signed-off-by: Wei Ming Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usbip:vhci_hcd USB port can get stuck in the disabled stateShuah Khan1-1/+7
When a remote usb device is attached to the local Virtual USB Host Controller Root Hub port, the bound device driver may send a port reset command. vhci_hcd accepts port resets only when the device doesn't have port address assigned to it. When reset happens device is in assigned/used state and vhci_hcd rejects it leaving the port in a stuck state. This problem was found when a blue-tooth or xbox wireless dongle was passed through using usbip. A few drivers reset the port during probe including mt76 driver specific to this bug report. Fix the problem with a change to honor reset requests when device is in used state (VDEV_ST_USED). Reported-and-tested-by: Michael <[email protected]> Suggested-by: Michael <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usbip: clean up code in vhci_device_unlink_cleanupAnirudh Rayabharam1-40/+12
The cleanup code for unlink_tx and unlink_rx lists is almost the same. So, extract it into a new function and call it for both unlink_rx and unlink_tx. Also, remove unnecessary log messages. Signed-off-by: Anirudh Rayabharam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usbip: give back URBs for unsent unlink requests during cleanupAnirudh Rayabharam1-0/+24
In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are not given back. This sometimes causes usb_kill_urb to wait indefinitely for that urb to be given back. syzbot has reported a hung task issue [1] for this. To fix this, give back the urbs corresponding to unsent unlink requests (unlink_tx list) similar to how urbs corresponding to unanswered unlink requests (unlink_rx list) are given back. [1]: https://syzkaller.appspot.com/bug?id=08f12df95ae7da69814e64eb5515d5a85ed06b76 Reported-by: [email protected] Tested-by: [email protected] Reviewed-by: Shuah Khan <[email protected]> Signed-off-by: Anirudh Rayabharam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: gadget: aspeed: Remove repeated verbose license textCai Huoqing5-25/+0
remove it because SPDX-License-Identifier is already used Signed-off-by: Cai Huoqing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: gadget: mass_storage: Remove repeated verbose license textCai Huoqing1-30/+0
remove it because SPDX-License-Identifier is already used Signed-off-by: Cai Huoqing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: musb: musb_dsps: request_irq() after initializing musbNadezda Lutovinova1-7/+6
If IRQ occurs between calling dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev(), then null pointer dereference occurs since glue->musb wasn't initialized yet. The patch puts initializing of neccesery data before registration of the interrupt handler. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Nadezda Lutovinova <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: dwc3: pci: add support for AMD's newer generation platform.Nehal Bakulchandra Shah1-0/+17
AMD's latest platforms has DWC3 controller. Add the PCI ID and properties for the same. Signed-off-by: Nehal Bakulchandra Shah <[email protected]> Acked-by: Felipe Balbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: dwc3: imx8mp: request irq after initializing dwc3Nadezda Lutovinova1-7/+7
If IRQ occurs between calling devm_request_threaded_irq() and initializing dwc3_imx->dwc3, then null pointer dereference occurs since dwc3_imx->dwc3 is used in dwc3_imx8mp_interrupt(). The patch puts registration of the interrupt handler after initializing of neccesery data. Found by Linux Driver Verification project (linuxtesting.org). Reviewed-by: Fabio Estevam <[email protected]> Acked-by: Felipe Balbi <[email protected]> Signed-off-by: Nadezda Lutovinova <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26usb: ehci-orion: Handle errors of clk_prepare_enable() in probeEvgeny Novikov1-2/+6
ehci_orion_drv_probe() did not account for possible errors of clk_prepare_enable() that in particular could cause invocation of clk_disable_unprepare() on clocks that were not prepared/enabled yet, e.g. in remove or on handling errors of usb_add_hcd() in probe. Though, there were several patches fixing different issues with clocks in this driver, they did not solve this problem. Add handling of errors of clk_prepare_enable() in ehci_orion_drv_probe() to avoid calls of clk_disable_unprepare() without previous successful invocation of clk_prepare_enable(). Found by Linux Driver Verification project (linuxtesting.org). Fixes: 8c869edaee07 ("ARM: Orion: EHCI: Add support for enabling clocks") Co-developed-by: Kirill Shilimanov <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Evgeny Novikov <[email protected]> Signed-off-by: Kirill Shilimanov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26xhci: Add bus number to some debug messagesMathias Nyman3-5/+10
As we register two usb buses for each xHC, and systems with several hosts are more and more common it is getting hard to follow the flow of debug messages without knowing which bus they belong to Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26xhci: Add additional dynamic debug to follow URBs in cancel and error cases.Mathias Nyman1-6/+24
Add more debugging messages to follow what happends to a URB internally in special cases like URB cancel, halted endpoints and endpoint reset. Helps tracking issues like URB never given back by host. Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST ↵Mathias Nyman1-12/+12
quirk set" This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760. That commit effectively disabled Intel host initiated U1/U2 lpm for devices with periodic endpoints. Before that commit we disabled host initiated U1/U2 lpm if the exit latency was larger than any periodic endpoint service interval, this is according to xhci spec xhci 1.1 specification section 4.23.5.2 After that commit we incorrectly checked that service interval was smaller than U1/U2 inactivity timeout. This is not relevant, and can't happen for Intel hosts as previously set U1/U2 timeout = 105% * service interval. Patch claimed it solved cases where devices can't be enumerated because of bandwidth issues. This might be true but it's a side effect of accidentally turning off lpm. exit latency calculations have been revised since then Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26xhci: Fix failure to give back some cached cancelled URBs.Mathias Nyman1-15/+25
Only TDs with status TD_CLEARING_CACHE will be given back after cache is cleared with a set TR deq command. xhci_invalidate_cached_td() failed to set the TD_CLEARING_CACHE status for some cancelled TDs as it assumed an endpoint only needs to clear the TD it stopped on. This isn't always true. For example with streams enabled an endpoint may have several stream rings, each stopping on a different TDs. Note that if an endpoint has several stream rings, the current code will still only clear the cache of the stream pointed to by the last cancelled TD in the cancel list. This patch only focus on making sure all canceled TDs are given back, avoiding hung task after device removal. Another fix to solve clearing the caches of all stream rings with cancelled TDs is needed, but not as urgent. This issue was simultanously discovered and debugged by by Tao Wang, with a slightly different fix proposal. Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps") Cc: <[email protected]> #5.12 Reported-by: Tao Wang <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26xhci: fix even more unsafe memory usage in xhci tracingMathias Nyman4-23/+27
Removes static char buffer usage in the following decode functions: xhci_decode_ctrl_ctx() xhci_decode_slot_context() xhci_decode_usbsts() xhci_decode_doorbell() xhci_decode_ep_context() Caller must provide a buffer to use. In tracing use __get_str() as recommended to pass buffer. Minor changes are needed in other xhci code as these functions are also used elsewhere Cc: <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26xhci: fix unsafe memory usage in xhci tracingMathias Nyman3-30/+36
Removes static char buffer usage in the following decode functions: xhci_decode_trb() xhci_decode_ptortsc() Caller must provide a buffer to use. In tracing use __get_str() as recommended to pass buffer. Minor chanes are needed in xhci debugfs code as these functions are also used there. Changes include moving XHCI_MSG_MAX definititon from xhci-trace.h to xhci.h Cc: <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-08-26USB: serial: replace symbolic permissions by octal permissionsUtkarsh Verma7-15/+15
Replace symbolic permission macros with octal permission numbers because octal permission numbers are easier to read and understand instead of their symbolic macro names. No functional change. Suggested-by: Lukas Bulwahn <[email protected]> Signed-off-by: Utkarsh Verma <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-08-25Revert "USB: serial: ch341: fix character loss at high transfer rates"Johan Hovold1-1/+0
This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b. These devices do not appear to send a zero-length packet when the transfer size is a multiple of the bulk-endpoint max-packet size. This means that incoming data may not be processed by the driver until a short packet is received or the receive buffer is full. Revert back to using endpoint-sized receive buffers to avoid stalled reads. Reported-by: Paul Größel <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131 Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates") Cc: [email protected] Cc: Willy Tarreau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-08-24USB: serial: option: add new VID/PID to support Fibocom FG150Zhengjun Zhang1-0/+2
Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform, support Sub-6G band. Here are the outputs of lsusb -v and usb-devices: > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2cb7 ProdID=010b Rev=04.14 > S: Manufacturer=Fibocom > S: Product=Fibocom Modem_SN:XXXXXXXX > S: SerialNumber=XXXXXXXX > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host > I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 3.20 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 9 > idVendor 0x2cb7 Fibocom > idProduct 0x010b > bcdDevice 4.14 > iManufacturer 1 Fibocom > iProduct 2 Fibocom Modem_SN:XXXXXXXX > iSerial 3 XXXXXXXX > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x00e6 > bNumInterfaces 5 > bConfigurationValue 1 > iConfiguration 4 RNDIS_DUN_DIAG_ADB > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 896mA > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 0 > bInterfaceCount 2 > bFunctionClass 239 Miscellaneous Device > bFunctionSubClass 4 > bFunctionProtocol 1 > iFunction 7 RNDIS > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 239 Miscellaneous Device > bInterfaceSubClass 4 > bInterfaceProtocol 1 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 01 > ** UNRECOGNIZED: 04 24 02 00 > ** UNRECOGNIZED: 05 24 06 00 01 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 9 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x8e EP 14 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x0f EP 15 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 00 > ** UNRECOGNIZED: 04 24 02 02 > ** UNRECOGNIZED: 05 24 06 00 00 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x000a 1x 10 bytes > bInterval 9 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 48 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 4 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 66 > bInterfaceProtocol 1 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Binary Object Store Descriptor: > bLength 5 > bDescriptorType 15 > wTotalLength 0x0016 > bNumDeviceCaps 2 > USB 2.0 Extension Device Capability: > bLength 7 > bDescriptorType 16 > bDevCapabilityType 2 > bmAttributes 0x00000006 > BESL Link Power Management (LPM) Supported > SuperSpeed USB Device Capability: > bLength 10 > bDescriptorType 16 > bDevCapabilityType 3 > bmAttributes 0x00 > wSpeedsSupported 0x000f > Device can operate at Low Speed (1Mbps) > Device can operate at Full Speed (12Mbps) > Device can operate at High Speed (480Mbps) > Device can operate at SuperSpeed (5Gbps) > bFunctionalitySupport 1 > Lowest fully-functional device speed is Full Speed (12Mbps) > bU1DevExitLat 1 micro seconds > bU2DevExitLat 500 micro seconds > Device Status: 0x0000 > (Bus Powered) Signed-off-by: Zhengjun Zhang <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.