aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2023-01-17usb: musb: fix error return code in omap2430_probe()Yang Yingliang1-1/+3
Before calling platform_get_resource() in omap2430_probe(), the 'ret' is re-assgined to 0, it can't return an error code, if platform_get_resource fails. Set the error code to -EINVAL to fix this. Fixes: ffbe2feac59b ("usb: musb: omap2430: Fix probe regression for missing resources") Cc: stable <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)Xu Yang1-2/+2
After successfully probed, ci->role_switch would only be NULL or a valid pointer. IS_ERR(ci->role_switch) will always return 0. So no need to wrap it with IS_ERR, otherwise the logic is wrong. Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way") cc: <[email protected]> Signed-off-by: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tablesMathias Nyman1-0/+34
USB3 ports on xHC hosts may have retimers that cause too long exit latency to work with native USB3 U1/U2 link power management states. For now only use usb_acpi_port_lpm_incapable() to evaluate if port lpm should be disabled while setting up the USB3 roothub. Other ways to identify lpm incapable ports can be added here later if ACPI _DSM does not exist. Limit this to Intel hosts for now, this is to my knowledge only an Intel issue. Cc: [email protected] Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17usb: acpi: add helper to check port lpm capability using acpi _DSMMathias Nyman1-0/+65
Add a helper to evaluate ACPI usb device specific method (_DSM) provided in case the USB3 port shouldn't enter U1 and U2 link states. This _DSM was added as port specific retimer configuration may lead to exit latencies growing beyond U1/U2 exit limits, and OS needs a way to find which ports can't support U1/U2 link power management states. This _DSM is also used by windows: Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm- Some patch issues found in testing resolved by Ron Lee Cc: [email protected] Tested-by: Ron Lee <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17xhci: Add a flag to disable USB3 lpm on a xhci root port level.Mathias Nyman2-0/+9
One USB3 roothub port may support link power management, while another root port on the same xHC can't due to different retimers used for the ports. This is the case with Intel Alder Lake, and possible future platforms where retimers used for USB4 ports cause too long exit latecy to enable native USB3 lpm U1 and U2 states. Add a flag in the xhci port structure to indicate if the port is lpm_incapable, and check it while calculating exit latency. Cc: [email protected] Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17xhci: Add update_hub_device override for PCI xHCI hostsMathias Nyman3-1/+17
Allow PCI hosts to check and tune roothub and port settings before the hub is up and running. This override is needed to turn off U1 and U2 LPM for some ports based on per port ACPI _DSM, _UPC, or possibly vendor specific mmio values for Intel xHC hosts. Usb core calls the host update_hub_device once it creates a hub. Entering U1 or U2 link power save state on ports with this limitation will cause link to fail, turning the usb device unusable in that setup. Cc: [email protected] Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17xhci: Fix null pointer dereference when host diesMathias Nyman1-0/+5
Make sure xhci_free_dev() and xhci_kill_endpoint_urbs() do not race and cause null pointer dereference when host suddenly dies. Usb core may call xhci_free_dev() which frees the xhci->devs[slot_id] virt device at the same time that xhci_kill_endpoint_urbs() tries to loop through all the device's endpoints, checking if there are any cancelled urbs left to give back. hold the xhci spinlock while freeing the virt device Cc: [email protected] Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17usb: xhci: Check endpoint is valid before dereferencing itJimmy Hu1-1/+4
When the host controller is not responding, all URBs queued to all endpoints need to be killed. This can cause a kernel panic if we dereference an invalid endpoint. Fix this by using xhci_get_virt_ep() helper to find the endpoint and checking if the endpoint is valid before dereferencing it. [233311.853271] xhci-hcd xhci-hcd.1.auto: xHCI host controller not responding, assume dead [233311.853393] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000e8 [233311.853964] pc : xhci_hc_died+0x10c/0x270 [233311.853971] lr : xhci_hc_died+0x1ac/0x270 [233311.854077] Call trace: [233311.854085] xhci_hc_died+0x10c/0x270 [233311.854093] xhci_stop_endpoint_command_watchdog+0x100/0x1a4 [233311.854105] call_timer_fn+0x50/0x2d4 [233311.854112] expire_timers+0xac/0x2e4 [233311.854118] run_timer_softirq+0x300/0xabc [233311.854127] __do_softirq+0x148/0x528 [233311.854135] irq_exit+0x194/0x1a8 [233311.854143] __handle_domain_irq+0x164/0x1d0 [233311.854149] gic_handle_irq.22273+0x10c/0x188 [233311.854156] el1_irq+0xfc/0x1a8 [233311.854175] lpm_cpuidle_enter+0x25c/0x418 [msm_pm] [233311.854185] cpuidle_enter_state+0x1f0/0x764 [233311.854194] do_idle+0x594/0x6ac [233311.854201] cpu_startup_entry+0x7c/0x80 [233311.854209] secondary_start_kernel+0x170/0x198 Fixes: 50e8725e7c42 ("xhci: Refactor command watchdog and fix split string.") Cc: [email protected] Signed-off-by: Jimmy Hu <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Message-ID: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17xhci-pci: set the dma max_seg_sizeRicardo Ribalda1-0/+2
Allow devices to have dma operations beyond 64K, and avoid warnings such as: xhci_hcd 0000:00:14.0: mapping sg segment longer than device claims to support [len=98304] [max=65536] Cc: [email protected] Cc: Takashi Iwai <[email protected]> Signed-off-by: Ricardo Ribalda <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17usb-storage: apply IGNORE_UAS only for HIKSEMI MD202 on RTL9210Juhyung Park2-7/+13
The commit e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") blacklists UAS for all of RTL9210 enclosures. The RTL9210 controller was advertised with UAS since its release back in 2019 and was shipped with a lot of enclosure products with different firmware combinations. Blacklist UAS only for HIKSEMI MD202. This should hopefully be replaced with more robust method than just comparing strings. But with limited information [1] provided thus far (dmesg when the device is plugged in, which includes manufacturer and product, but no lsusb -v to compare against), this is the best we can do for now. [1] https://lore.kernel.org/all/[email protected] Fixes: e00b488e813f ("usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS") Cc: Alan Stern <[email protected]> Cc: Hongling Zeng <[email protected]> Cc: [email protected] Signed-off-by: Juhyung Park <[email protected]> Acked-by: Oliver Neukum <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17USB: gadgetfs: Fix race between mounting and unmountingAlan Stern1-7/+21
The syzbot fuzzer and Gerald Lee have identified a use-after-free bug in the gadgetfs driver, involving processes concurrently mounting and unmounting the gadgetfs filesystem. In particular, gadgetfs_fill_super() can race with gadgetfs_kill_sb(), causing the latter to deallocate the_device while the former is using it. The output from KASAN says, in part: BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:102 [inline] BUG: KASAN: use-after-free in atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] BUG: KASAN: use-after-free in __refcount_sub_and_test include/linux/refcount.h:272 [inline] BUG: KASAN: use-after-free in __refcount_dec_and_test include/linux/refcount.h:315 [inline] BUG: KASAN: use-after-free in refcount_dec_and_test include/linux/refcount.h:333 [inline] BUG: KASAN: use-after-free in put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] BUG: KASAN: use-after-free in gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 Write of size 4 at addr ffff8880276d7840 by task syz-executor126/18689 CPU: 0 PID: 18689 Comm: syz-executor126 Not tainted 6.1.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> ... atomic_fetch_sub_release include/linux/atomic/atomic-instrumented.h:176 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] put_dev drivers/usb/gadget/legacy/inode.c:159 [inline] gadgetfs_kill_sb+0x33/0x100 drivers/usb/gadget/legacy/inode.c:2086 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 vfs_get_super fs/super.c:1190 [inline] get_tree_single+0xd0/0x160 fs/super.c:1207 vfs_get_tree+0x88/0x270 fs/super.c:1531 vfs_fsconfig_locked fs/fsopen.c:232 [inline] The simplest solution is to ensure that gadgetfs_fill_super() and gadgetfs_kill_sb() are serialized by making them both acquire a new mutex. Signed-off-by: Alan Stern <[email protected]> Reported-and-tested-by: [email protected] Reported-and-tested-by: Gerald Lee <[email protected]> Link: https://lore.kernel.org/linux-usb/CAO3qeMVzXDP-JU6v1u5Ags6Q-bb35kg3=C6d04DjzA9ffa5x1g@mail.gmail.com/ Fixes: e5d82a7360d1 ("vfs: Convert gadgetfs to use the new mount API") CC: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-17usb: cdns3: remove fetched trb from cache before dequeuingPawel Laszczak1-0/+12
After doorbell DMA fetches the TRB. If during dequeuing request driver changes NORMAL TRB to LINK TRB but doesn't delete it from controller cache then controller will handle cached TRB and packet can be lost. The example scenario for this issue looks like: 1. queue request - set doorbell 2. dequeue request 3. send OUT data packet from host 4. Device will accept this packet which is unexpected 5. queue new request - set doorbell 6. Device lost the expected packet. By setting DFLUSH controller clears DRDY bit and stop DMA transfer. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Acked-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-16usb: gadget: remove s3c24xx driversArnd Bergmann6-3571/+0
The s3c24xx platform is gone, so both the udc and hsudc drivers can be removed as well. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann1-4/+4
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Acked-by: Miquel Raynal <[email protected]> Acked-by: Ulf Hansson <[email protected]> Acked-by: Stephen Boyd <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-16USB: serial: option: add Quectel EM05CN modemDuke Xin(辛安文)1-0/+3
The EM05CN modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0312 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-01-16USB: serial: option: add Quectel EM05CN (SG) modemDuke Xin(辛安文)1-0/+3
The EM05CN (SG) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "MBIM" : AT + MBIM + DIAG + NMEA + MODEM "RMNET" : AT + DIAG + NMEA + Modem + QMI The detailed description of the USB configuration for each mode as follows: MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 1 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0310 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-CN C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-01-16USB: serial: cp210x: add SCALANCE LPE-9000 device idMichael Adler1-0/+1
Add the USB serial console device ID for Siemens SCALANCE LPE-9000 which have a USB port for their serial console. Signed-off-by: Michael Adler <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-01-16USB: serial: option: add Quectel EC200U modemAli Mirghasemi1-0/+2
Add support for EC200U modem 0x0901: EC200U - AT + AP + CP + NMEA + DIAG + MOS usb-device output: T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0901 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 512 Ivl=4096ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Ali Mirghasemi <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-01-16USB: serial: option: add Quectel EM05-G (RS) modemDuke Xin(辛安文)1-0/+3
The EM05-G (RS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0314 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-01-12Merge tag 'for-linus-6.2-rc4-tag' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two cleanup patches - a fix of a memory leak in the Xen pvfront driver - a fix of a locking issue in the Xen hypervisor console driver * tag 'for-linus-6.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pvcalls: free active map buffer on pvcalls_front_free_map hvc/xen: lock console list traversal x86/xen: Remove the unused function p2m_index() xen: make remove callback of xen driver void returned
2023-01-12USB: serial: option: add Quectel EM05-G (GR) modemDuke Xin(辛安文)1-0/+3
The EM05-G (GR) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0313 Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-01-12USB: serial: option: add Quectel EM05-G (CS) modemDuke Xin(辛安文)1-0/+3
The EM05-G (CS) modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030C Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Duke Xin(辛安文) <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-01-12ARM: sa1100: remove unused board filesArnd Bergmann1-4/+1
The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and Simpad machines were all marked as unused as there are no known users left. Remove all of these, along with references to them in defconfig files and drivers. Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600 and Jornada 720, each of which had one person still using them, with Collie also being supported in Qemu. Cc: Peter Chubb <[email protected]> Cc: Stefan Eletzhofer <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Acked-by: Viresh Kumar <[email protected]> Acked-by: Lee Jones <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-12usb: phy: remove phy-isp1301-omap driverArnd Bergmann3-1568/+0
With the H2 and H3 board support removed from the driver, there are actually no other users, so the entire driver can go away. Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/ Suggested-by: Aaro Koskinen <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-12ARM: omap1: remove dead codeArnd Bergmann3-116/+5
After the removal of the unused board files, I went through the omap1 code to look for code that no longer has any callers and remove that. In particular, support for the omap7xx/omap8xx family is now completely unused, so I'm only leaving omap15xx/omap16xx/omap59xx. Cc: Aaro Koskinen <[email protected]> Cc: Janusz Krzysztofik <[email protected]> Cc: [email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Acked-by: Tony Lindgren <[email protected]> Acked-by: Kevin Hilman <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-12ARM: omap1: remove unused board filesArnd Bergmann2-2/+0
All board support that was marked as 'unused' earlier can now be removed, leaving the five machines that that still had someone using them in 2022, or that are supported in qemu. Cc: Aaro Koskinen <[email protected]> Cc: Janusz Krzysztofik <[email protected]> Cc: Tony Lindgren <[email protected]> Cc: [email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-10ARM: cns3xxx: remove entire platformArnd Bergmann1-23/+0
cns3xxx was marked as unused a while ago, and gets removed entirely now. Acked-by: Krzysztof Hałasa <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2023-01-09Merge 6.2-rc3 into usb-nextGreg Kroah-Hartman5-6/+9
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06xhci: Convert to use list_count_nodes()Andy Shevchenko1-5/+2
The list API provides the list_count_nodes() to help with counting existing nodes in the list. Utilise it. Acked-by: Mathias Nyman <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: gadget: udc: bcm63xx: Convert to use list_count_nodes()Andy Shevchenko1-8/+3
The list API provides the list_count_nodes() to help with counting existing nodes in the list. Utilise it. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: gadget: hid: Convert to use list_count_nodes()Andy Shevchenko1-5/+2
The list API provides the list_count_nodes() to help with counting existing nodes in the list. Utilise it. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: typec: ucsi: Register USB Power Delivery CapabilitiesSaranya Gopal2-13/+158
UCSI allows the USB PD capabilities to be read with the GET_PDO command. This will register those capabilities and make them visible to user space. Reviewed-by: Heikki Krogerus <[email protected]> Co-developed-by: Rajaram Regupathy <[email protected]> Signed-off-by: Rajaram Regupathy <[email protected]> Signed-off-by: Saranya Gopal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: chipidea: imx: Drop empty platform remove functionUwe Kleine-König1-6/+0
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: musb: fix error return code in da8xx_musb_init()Wang Yufen1-1/+3
Fix to return a negative error code -ENODEV instead of 0 as before commit 09721ba6daa1 ("usb: musb: da8xx: Call earlier clk_prepare_enable()") did. Signed-off-by: Wang Yufen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: gadget: f_fs: use io_data->status consistentlyJohn Keeping1-4/+4
Commit fb1f16d74e26 ("usb: gadget: f_fs: change ep->status safe in ffs_epfile_io()") added a new ffs_io_data::status field to fix lifetime issues in synchronous requests. While there are no similar lifetime issues for asynchronous requests (the separate ep member in ffs_io_data avoids them) using the status field means the USB request can be freed earlier and that there is more consistency between the synchronous and asynchronous I/O paths. Cc: Linyu Yuan <[email protected]> Signed-off-by: John Keeping <[email protected]> Reviewed-by: Linyu Yuan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: gadget: fusb300_udc: free irq on the error path in fusb300_probe()Gaosheng Cui1-3/+7
When request_irq(ires1->start) failed in w5300_hw_probe(), irq ires->start has not been freed, and on the clean_up3 error path, we also need to free ires1->start irq, fix it. In addition, We should add free_irq in fusb300_remove(), and give the lables a proper name so that they can be understood easily, so add free_irq in fusb300_remove(), and update clean_up3 to err_alloc_request. Fixes: 0fe6f1d1f612 ("usb: udc: add Faraday fusb300 driver") Signed-off-by: Gaosheng Cui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: typec: altmodes/displayport: Add hpd sysfs attributeBadhri Jagan Sridharan1-0/+10
Exporsing HotPlugDetect(HPD) helps userspace to infer HPD state as defined by VESA DisplayPort Alt Mode on USB Type-C Standard. This allows userspace to notify users for self help, for instance, to hint user that the display port cable is probably detached (or) the display port sink (viz., monitors ect.,) is un-powered. Also helps to debug issues reported from field. This change adds an additional attribute "hpd" to the existing "displayport" attributes. VESA DisplayPort Alt Mode on USB Type-C Standard defines how HotPlugDetect(HPD) shall be supported on the USB-C connector when operating in DisplayPort Alt Mode. This is a read only node which reflects the current state of HPD. Valid values: - 1 when HPD’s logical state is high (HPD_High) - 0 when HPD’s logical state is low (HPD_Low) Signed-off-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: dwc3: gadget: Ignore End Transfer delay on teardownThinh Nguyen1-1/+4
If we delay sending End Transfer for Setup TRB to be prepared, we need to check if the End Transfer was in preparation for a driver teardown/soft-disconnect. In those cases, just send the End Transfer command without delay. In the case of soft-disconnect, there's a very small chance the command may not go through immediately. But should it happen, the Setup TRB will be prepared during the polling of the controller halted state, allowing the command to go through then. In the case of disabling endpoint due to reconfiguration (e.g. set_interface(alt-setting) or usb reset), then it's driven by the host. Typically the host wouldn't immediately cancel the control request and send another control transfer to trigger the End Transfer command timeout. Fixes: 4db0fbb60136 ("usb: dwc3: gadget: Don't delay End Transfer on delayed_status") Cc: [email protected] Signed-off-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/f1617a323e190b9cc408fb8b65456e32b5814113.1670546756.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: dwc3: xilinx: include linux/gpio/consumer.hArnd Bergmann1-0/+1
The newly added gpio consumer calls cause a build failure in configurations that fail to include the right header implicitly: drivers/usb/dwc3/dwc3-xilinx.c: In function 'dwc3_xlnx_init_zynqmp': drivers/usb/dwc3/dwc3-xilinx.c:207:22: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_clk_get_optional'? [-Werror=implicit-function-declaration] 207 | reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | ^~~~~~~~~~~~~~~~~~~~~~~ | devm_clk_get_optional Fixes: ca05b38252d7 ("usb: dwc3: xilinx: Add gpio-reset support") Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-01-06usb: fotg210-udc: fix error return code in fotg210_udc_probe()Yang Yingliang1-0/+2
After commit 5f217ccd520f ("fotg210-udc: Support optional external PHY"), the error code is re-assigned to 0 in fotg210_udc_probe(), if allocate or map memory fails after the assignment, it can't return an error code. Set the error code to -ENOMEM to fix this problem. Fixes: 5f217ccd520f ("fotg210-udc: Support optional external PHY") Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-12-28usb: fotg210: fix OTG-only buildArnd Bergmann1-4/+1
The fotg210 module combines the HCD and OTG drivers, which then fails to build when only the USB gadget support is enabled in the kernel but host support is not: aarch64-linux-ld: drivers/usb/fotg210/fotg210-core.o: in function `fotg210_init': fotg210-core.c:(.init.text+0xc): undefined reference to `usb_disabled' Move the check for usb_disabled() after the check for the HCD module, and let the OTG driver still be probed in this configuration. A nicer approach might be to have the common portion built as a library module, with the two platform other files registering their own platform_driver instances separately. Fixes: ddacd6ef44ca ("usb: fotg210: Fix Kconfig for USB host modules") Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-12-28Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"Ferry Toth1-1/+1
This reverts commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac. This patch results in some qemu test failures, specifically xilinx-zynq-a9 machine and zynq-zc702 as well as zynq-zed devicetree files, when trying to boot from USB drive. Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: 8a7b31d545d3 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout") Cc: [email protected] Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Ferry Toth <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-12-25treewide: Convert del_timer*() to timer_shutdown*()Steven Rostedt (Google)3-4/+4
Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Steven Rostedt (Google) <[email protected]> Acked-by: Pavel Machek <[email protected]> [ LED ] Acked-by: Kalle Valo <[email protected]> [ wireless ] Acked-by: Paolo Abeni <[email protected]> [ networking ] Signed-off-by: Linus Torvalds <[email protected]>
2022-12-21Merge tag 'net-6.2-rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, netfilter and can. Current release - regressions: - bpf: synchronize dispatcher update with bpf_dispatcher_xdp_func - rxrpc: - fix security setting propagation - fix null-deref in rxrpc_unuse_local() - fix switched parameters in peer tracing Current release - new code bugs: - rxrpc: - fix I/O thread startup getting skipped - fix locking issues in rxrpc_put_peer_locked() - fix I/O thread stop - fix uninitialised variable in rxperf server - fix the return value of rxrpc_new_incoming_call() - microchip: vcap: fix initialization of value and mask - nfp: fix unaligned io read of capabilities word Previous releases - regressions: - stop in-kernel socket users from corrupting socket's task_frag - stream: purge sk_error_queue in sk_stream_kill_queues() - openvswitch: fix flow lookup to use unmasked key - dsa: mv88e6xxx: avoid reg_lock deadlock in mv88e6xxx_setup_port() - devlink: - hold region lock when flushing snapshots - protect devlink dump by the instance lock Previous releases - always broken: - bpf: - prevent leak of lsm program after failed attach - resolve fext program type when checking map compatibility - skbuff: account for tail adjustment during pull operations - macsec: fix net device access prior to holding a lock - bonding: switch back when high prio link up - netfilter: flowtable: really fix NAT IPv6 offload - enetc: avoid buffer leaks on xdp_do_redirect() failure - unix: fix race in SOCK_SEQPACKET's unix_dgram_sendmsg() - dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq" * tag 'net-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) net: fec: check the return value of build_skb() net: simplify sk_page_frag Treewide: Stop corrupting socket's task_frag net: Introduce sk_use_task_frag in struct sock. mctp: Remove device type check at unregister net: dsa: microchip: remove IRQF_TRIGGER_FALLING in request_threaded_irq can: kvaser_usb: hydra: help gcc-13 to figure out cmd_len can: flexcan: avoid unbalanced pm_runtime_enable warning Documentation: devlink: add missing toc entry for etas_es58x devlink doc mctp: serial: Fix starting value for frame check sequence nfp: fix unaligned io read of capabilities word net: stream: purge sk_error_queue in sk_stream_kill_queues() myri10ge: Fix an error handling path in myri10ge_probe() net: microchip: vcap: Fix initialization of value and mask rxrpc: Fix the return value of rxrpc_new_incoming_call() rxrpc: rxperf: Fix uninitialised variable rxrpc: Fix I/O thread stop rxrpc: Fix switched parameters in peer tracing rxrpc: Fix locking issues in rxrpc_put_peer_locked() rxrpc: Fix I/O thread startup getting skipped ...
2022-12-19Treewide: Stop corrupting socket's task_fragBenjamin Coddington1-0/+1
Since moving to memalloc_nofs_save/restore, SUNRPC has stopped setting the GFP_NOIO flag on sk_allocation which the networking system uses to decide when it is safe to use current->task_frag. The results of this are unexpected corruption in task_frag when SUNRPC is involved in memory reclaim. The corruption can be seen in crashes, but the root cause is often difficult to ascertain as a crashing machine's stack trace will have no evidence of being near NFS or SUNRPC code. I believe this problem to be much more pervasive than reports to the community may indicate. Fix this by having kernel users of sockets that may corrupt task_frag due to reclaim set sk_use_task_frag = false. Preemptively correcting this situation for users that still set sk_allocation allows them to convert to memalloc_nofs_save/restore without the same unexpected corruptions that are sure to follow, unlikely to show up in testing, and difficult to bisect. CC: Philipp Reisner <[email protected]> CC: Lars Ellenberg <[email protected]> CC: "Christoph Böhmwalder" <[email protected]> CC: Jens Axboe <[email protected]> CC: Josef Bacik <[email protected]> CC: Keith Busch <[email protected]> CC: Christoph Hellwig <[email protected]> CC: Sagi Grimberg <[email protected]> CC: Lee Duncan <[email protected]> CC: Chris Leech <[email protected]> CC: Mike Christie <[email protected]> CC: "James E.J. Bottomley" <[email protected]> CC: "Martin K. Petersen" <[email protected]> CC: Valentina Manea <[email protected]> CC: Shuah Khan <[email protected]> CC: Greg Kroah-Hartman <[email protected]> CC: David Howells <[email protected]> CC: Marc Dionne <[email protected]> CC: Steve French <[email protected]> CC: Christine Caulfield <[email protected]> CC: David Teigland <[email protected]> CC: Mark Fasheh <[email protected]> CC: Joel Becker <[email protected]> CC: Joseph Qi <[email protected]> CC: Eric Van Hensbergen <[email protected]> CC: Latchesar Ionkov <[email protected]> CC: Dominique Martinet <[email protected]> CC: Ilya Dryomov <[email protected]> CC: Xiubo Li <[email protected]> CC: Chuck Lever <[email protected]> CC: Jeff Layton <[email protected]> CC: Trond Myklebust <[email protected]> CC: Anna Schumaker <[email protected]> CC: Steffen Klassert <[email protected]> CC: Herbert Xu <[email protected]> Suggested-by: Guillaume Nault <[email protected]> Signed-off-by: Benjamin Coddington <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-12-16Merge tag 'driver-core-6.2-rc1' of ↵Linus Torvalds8-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of driver core and kernfs changes for 6.2-rc1. The "big" change in here is the addition of a new macro, container_of_const() that will preserve the "const-ness" of a pointer passed into it. The "problem" of the current container_of() macro is that if you pass in a "const *", out of it can comes a non-const pointer unless you specifically ask for it. For many usages, we want to preserve the "const" attribute by using the same call. For a specific example, this series changes the kobj_to_dev() macro to use it, allowing it to be used no matter what the const value is. This prevents every subsystem from having to declare 2 different individual macros (i.e. kobj_const_to_dev() and kobj_to_dev()) and having the compiler enforce the const value at build time, which having 2 macros would not do either. The driver for all of this have been discussions with the Rust kernel developers as to how to properly mark driver core, and kobject, objects as being "non-mutable". The changes to the kobject and driver core in this pull request are the result of that, as there are lots of paths where kobjects and device pointers are not modified at all, so marking them as "const" allows the compiler to enforce this. So, a nice side affect of the Rust development effort has been already to clean up the driver core code to be more obvious about object rules. All of this has been bike-shedded in quite a lot of detail on lkml with different names and implementations resulting in the tiny version we have in here, much better than my original proposal. Lots of subsystem maintainers have acked the changes as well. Other than this change, included in here are smaller stuff like: - kernfs fixes and updates to handle lock contention better - vmlinux.lds.h fixes and updates - sysfs and debugfs documentation updates - device property updates All of these have been in the linux-next tree for quite a while with no problems" * tag 'driver-core-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (58 commits) device property: Fix documentation for fwnode_get_next_parent() firmware_loader: fix up to_fw_sysfs() to preserve const usb.h: take advantage of container_of_const() device.h: move kobj_to_dev() to use container_of_const() container_of: add container_of_const() that preserves const-ness of the pointer driver core: fix up missed drivers/s390/char/hmcdrv_dev.c class.devnode() conversion. driver core: fix up missed scsi/cxlflash class.devnode() conversion. driver core: fix up some missing class.devnode() conversions. driver core: make struct class.devnode() take a const * driver core: make struct class.dev_uevent() take a const * cacheinfo: Remove of_node_put() for fw_token device property: Add a blank line in Kconfig of tests device property: Rename goto label to be more precise device property: Move PROPERTY_ENTRY_BOOL() a bit down device property: Get rid of __PROPERTY_ENTRY_ARRAY_EL*SIZE*() kernfs: fix all kernel-doc warnings and multiple typos driver core: pass a const * into of_device_uevent() kobject: kset_uevent_ops: make name() callback take a const * kobject: kset_uevent_ops: make filter() callback take a const * kobject: make kobject_namespace take a const * ...
2022-12-16Merge tag 'usb-6.2-rc1' of ↵Linus Torvalds132-6914/+1612
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver updates from Greg KH: "Here is the large set of USB and Thunderbolt driver changes for 6.2-rc1. Overall, thanks to the removal of a driver, more lines were removed than added, a nice change. Highlights include: - removal of the sisusbvga driver that was not used by anyone anymore - minor thunderbolt driver changes and tweaks - chipidea driver updates - usual set of typec driver features and hardware support added - musb minor driver fixes - fotg210 driver fixes, bringing that hardware back from the "dead" - minor dwc3 driver updates - addition, and then removal, of a list.h helper function for many USB and other subsystem drivers, that ended up breaking the build. That will come back for 6.3-rc1, it missed this merge window. - usual xhci updates and enhancements - usb-serial driver updates and support for new devices - other minor USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (153 commits) usb: gadget: uvc: Rename bmInterfaceFlags -> bmInterlaceFlags usb: dwc2: power on/off phy for peripheral mode in dual-role mode usb: dwc2: disable lpm feature on Rockchip SoCs dt-bindings: usb: mtk-xhci: add support for mt7986 usb: dwc3: core: defer probe on ulpi_read_id timeout usb: ulpi: defer ulpi_register on ulpi_read_id timeout usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller dt-bindings: vendor-prefixes: add Genesys Logic usb: fotg210-udc: fix potential memory leak in fotg210_udc_probe() usb: typec: tipd: Set mode of operation for USB Type-C connector usb: gadget: udc: drop obsolete dependencies on COMPILE_TEST usb: musb: remove extra check in musb_gadget_vbus_draw usb: gadget: uvc: Prevent buffer overflow in setup handler usb: dwc3: qcom: Fix memory leak in dwc3_qcom_interconnect_init usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe() usb: storage: Add check for kcalloc USB: sisusbvga: use module_usb_driver() USB: sisusbvga: rename sisusb.c to sisusbvga.c USB: sisusbvga: remove console support ...
2022-12-15xen: make remove callback of xen driver void returnedDawei Li1-3/+1
Since commit fc7a6209d571 ("bus: Make remove callback return void") forces bus_type::remove be void-returned, it doesn't make much sense for any bus based driver implementing remove callbalk to return non-void to its caller. This change is for xen bus based drivers. Acked-by: Juergen Gross <[email protected]> Signed-off-by: Dawei Li <[email protected]> Link: https://lore.kernel.org/r/TYCP286MB23238119AB4DF190997075C9CAE39@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Juergen Gross <[email protected]>
2022-12-14Merge tag 'v6.2-p1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Optimise away self-test overhead when they are disabled - Support symmetric encryption via keyring keys in af_alg - Flip hwrng default_quality, the default is now maximum entropy Algorithms: - Add library version of aesgcm - CFI fixes for assembly code - Add arm/arm64 accelerated versions of sm3/sm4 Drivers: - Remove assumption on arm64 that kmalloc is DMA-aligned - Fix selftest failures in rockchip - Add support for RK3328/RK3399 in rockchip - Add deflate support in qat - Merge ux500 into stm32 - Add support for TEE for PCI ID 0x14CA in ccp - Add mt7986 support in mtk - Add MaxLinear platform support in inside-secure - Add NPCM8XX support in npcm" * tag 'v6.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits) crypto: ux500/cryp - delete driver crypto: stm32/cryp - enable for use with Ux500 crypto: stm32 - enable drivers to be used on Ux500 dt-bindings: crypto: Let STM32 define Ux500 CRYP hwrng: geode - Fix PCI device refcount leak hwrng: amd - Fix PCI device refcount leak crypto: qce - Set DMA alignment explicitly crypto: octeontx2 - Set DMA alignment explicitly crypto: octeontx - Set DMA alignment explicitly crypto: keembay - Set DMA alignment explicitly crypto: safexcel - Set DMA alignment explicitly crypto: hisilicon/hpre - Set DMA alignment explicitly crypto: chelsio - Set DMA alignment explicitly crypto: ccree - Set DMA alignment explicitly crypto: ccp - Set DMA alignment explicitly crypto: cavium - Set DMA alignment explicitly crypto: img-hash - Fix variable dereferenced before check 'hdev->req' crypto: arm64/ghash-ce - use frame_push/pop macros consistently crypto: arm64/crct10dif - use frame_push/pop macros consistently crypto: arm64/aes-modes - use frame_push/pop macros consistently ...
2022-12-13Merge tag 'net-next-6.2' of ↵Linus Torvalds2-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...
Powered by cgit, Gruvboxed by Blaster4385.