aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2021-06-03usb: phy: introduce usb_phy device type with its own uevent handlerGrzegorz Jaszczyk1-8/+47
The USB charger type and status was already propagated to userspace through kobject_uevent_env during charger notify work. Nevertheless the uevent could be lost e.g. because it could be fired at an early kernel boot stage, way before udev daemon or any other user-space app was able to catch it. Registering uevent hook for introduced usb_phy_dev_type will allow to query sysfs 'uevent' file to restore that information at any time. Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Grzegorz Jaszczyk <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-03usb: mtu3: skip getting extcon when use manual drd switchChunfeng Yun1-1/+4
When use manual drd switch, extcon is not used in fact, so no need get it even it exists, just skip it like using role switch. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-03usb: mtu3: use dev_err_probe to print error log about extconChunfeng Yun1-2/+2
Print an error log when the error number is not -EPROBE_DEFER Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-03usb: mtu3: dump a status register of IPPCChunfeng Yun1-0/+1
Add a SSUSB_IP_PW_STS1 register to show ip sleep status Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-03usb: mtu3: remove repeated setting of speedChunfeng Yun3-3/+2
mtu3_gadget_start() will set speed, no need set it again in mtu3_gadget_set_speed(), just save the desired speed. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-03usb: mtu3: remove mtu3_ep0_setup() declaration in mtu3.hChunfeng Yun2-2/+1
It's defined and only used in the same file, so remove its declaration in mtu3.h, and make it static Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-02usb: musb: fix MUSB_QUIRK_B_DISCONNECT_99 handlingThomas Petazzoni1-2/+1
In commit 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64"), the logic to support the MUSB_QUIRK_B_DISCONNECT_99 quirk was modified to only conditionally schedule the musb->irq_work delayed work. This commit badly breaks ECM Gadget on AM335X. Indeed, with this commit, one can observe massive packet loss: $ ping 192.168.0.100 ... 15 packets transmitted, 3 received, 80% packet loss, time 14316ms Reverting this commit brings back a properly functioning ECM Gadget. An analysis of the commit seems to indicate that a mistake was made: the previous code was not falling through into the MUSB_QUIRK_B_INVALID_VBUS_91, but now it is, unless the condition is taken. Changing the logic to be as it was before the problematic commit *and* only conditionally scheduling musb->irq_work resolves the regression: $ ping 192.168.0.100 ... 64 packets transmitted, 64 received, 0% packet loss, time 64475ms Fixes: 92af4fc6ec33 ("usb: musb: Fix suspend with devices connected for a64") Cc: [email protected] Tested-by: Alexandre Belloni <[email protected]> Tested-by: Drew Fustini <[email protected]> Acked-by: Tony Lindgren <[email protected]> Signed-off-by: Thomas Petazzoni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-02usb: dwc3: gadget: Bail from dwc3_gadget_exit() if dwc->gadget is NULLJack Pham1-0/+4
There exists a possible scenario in which dwc3_gadget_init() can fail: during during host -> peripheral mode switch in dwc3_set_mode(), and a pending gadget driver fails to bind. Then, if the DRD undergoes another mode switch from peripheral->host the resulting dwc3_gadget_exit() will attempt to reference an invalid and dangling dwc->gadget pointer as well as call dma_free_coherent() on unmapped DMA pointers. The exact scenario can be reproduced as follows: - Start DWC3 in peripheral mode - Configure ConfigFS gadget with FunctionFS instance (or use g_ffs) - Run FunctionFS userspace application (open EPs, write descriptors, etc) - Bind gadget driver to DWC3's UDC - Switch DWC3 to host mode => dwc3_gadget_exit() is called. usb_del_gadget() will put the ConfigFS driver instance on the gadget_driver_pending_list - Stop FunctionFS application (closes the ep files) - Switch DWC3 to peripheral mode => dwc3_gadget_init() fails as usb_add_gadget() calls check_pending_gadget_drivers() and attempts to rebind the UDC to the ConfigFS gadget but fails with -19 (-ENODEV) because the FFS instance is not in FFS_ACTIVE state (userspace has not re-opened and written the descriptors yet, i.e. desc_ready!=0). - Switch DWC3 back to host mode => dwc3_gadget_exit() is called again, but this time dwc->gadget is invalid. Although it can be argued that userspace should take responsibility for ensuring that the FunctionFS application be ready prior to allowing the composite driver bind to the UDC, failure to do so should not result in a panic from the kernel driver. Fix this by setting dwc->gadget to NULL in the failure path of dwc3_gadget_init() and add a check to dwc3_gadget_exit() to bail out unless the gadget pointer is valid. Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") Cc: <[email protected]> Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Jack Pham <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-02usb: dwc3: gadget: Disable gadget IRQ during pullup disableWesley Cheng1-6/+5
Current sequence utilizes dwc3_gadget_disable_irq() alongside synchronize_irq() to ensure that no further DWC3 events are generated. However, the dwc3_gadget_disable_irq() API only disables device specific events. Endpoint events can still be generated. Briefly disable the interrupt line, so that the cleanup code can run to prevent device and endpoint events. (i.e. __dwc3_gadget_stop() and dwc3_stop_active_transfers() respectively) Without doing so, it can lead to both the interrupt handler and the pullup disable routine both writing to the GEVNTCOUNT register, which will cause an incorrect count being read from future interrupts. Fixes: ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller") Signed-off-by: Wesley Cheng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-02usb: dwc3: debugfs: Add and remove endpoint dirs dynamicallyJack Pham3-19/+8
The DWC3 DebugFS directory and files are currently created once during probe. This includes creation of subdirectories for each of the gadget's endpoints. This works fine for peripheral-only controllers, as dwc3_core_init_mode() calls dwc3_gadget_init() just prior to calling dwc3_debugfs_init(). However, for dual-role controllers, dwc3_core_init_mode() will instead call dwc3_drd_init() which is problematic in a few ways. First, the initial state must be determined, then dwc3_set_mode() will have to schedule drd_work and by then dwc3_debugfs_init() could have already been invoked. Even if the initial mode is peripheral, dwc3_gadget_init() happens after the DebugFS files are created, and worse so if the initial state is host and the controller switches to peripheral much later. And secondly, even if the gadget endpoints' debug entries were successfully created, if the controller exits peripheral mode, its dwc3_eps are freed so the debug files would now hold stale references. So it is best if the DebugFS endpoint entries are created and removed dynamically at the same time the underlying dwc3_eps are. Do this by calling dwc3_debugfs_create_endpoint_dir() as each endpoint is created, and conversely remove the DebugFS entry when the endpoint is freed. Fixes: 41ce1456e1db ("usb: dwc3: core: make dwc3_set_mode() work properly") Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Jack Pham <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-02USB: gr_udc: remove dentry storage for debugfs fileGreg Kroah-Hartman2-5/+4
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Cc: Felipe Balbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-06-02Revert "usb: typec: mux: Remove requirement for the "orientation-switch" ↵Heikki Krogerus1-0/+16
device property" This reverts commit acad3e9c7250c5fd20d9778a163f2adc95de38f5. The device property that can be used to identify the device class/type of the remote port parent when device graph is used is always needed after all. Without it there is no real way to know is the requested connection actually described in the device graph or not. If the connection is described in the device graph but the device instance is still missing for what ever reason, the code defers probe for now. Adding a comment to the code to explain this. Reviewed-by: Li Jun <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-31scsi: core: Kill DRIVER_SENSEHannes Reinecke1-2/+2
Replace the check for DRIVER_SENSE with a check for scsi_status_is_check_condition(). Audit all callsites to ensure the SAM status is set correctly. For backwards compability move the DRIVER_SENSE definition to sg.h, and update sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever SAM_STAT_CHECK_CONDITION is present. [mkp: fix zeroday srp warning] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> fix
2021-05-31Merge 5.13-rc4 into usb-nextGreg Kroah-Hartman18-35/+99
We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-31Merge 5.13-rc4 into tty-nextGreg Kroah-Hartman34-103/+318
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski20-69/+221
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <[email protected]>
2021-05-27USB: core: Check buffer length matches wLength for control transfersAlan Stern1-0/+6
A type of inconsistency that can show up in control URBs is when the setup packet's wLength value does not match the URB's transfer_buffer_length field. The two should always be equal; differences could lead to information leaks or undefined behavior for OUT transfers or overruns for IN transfers. This patch adds a test for such mismatches during URB submission. If the test fails, the submission is rejected with a -EBADR error code (which is not used elsewhere in the USB core), and a debugging message is logged for people interested in tracking down these errors. Reviewed-by: Johan Hovold <[email protected]> Signed-off-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: gadget: udc: udc-xilinx: Place correct function names into the headersLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/usb/gadget/udc/udc-xilinx.c:802: warning: expecting prototype for xudc_ep_enable(). Prototype was for __xudc_ep_enable() instead drivers/usb/gadget/udc/udc-xilinx.c:997: warning: expecting prototype for xudc_ep0_queue(). Prototype was for __xudc_ep0_queue() instead Cc: Felipe Balbi <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Michal Simek <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: gadget: udc: pxa27x_udc: Fix documentation for 'pxa27x_udc_start()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/gadget/udc/pxa27x_udc.c:1749: warning: expecting prototype for pxa27x_start(). Prototype was for pxa27x_udc_start() instead Cc: Daniel Mack <[email protected]> Cc: Haojian Zhuang <[email protected]> Cc: Robert Jarzmik <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Daniel Mack <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: typec: ucsi: Fix copy/paste issue for 'ucsi_set_drvdata()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/typec/ucsi/ucsi.c:1287: warning: expecting prototype for ucsi_get_drvdata(). Prototype was for ucsi_set_drvdata() instead Cc: Heikki Krogerus <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: dwc2: gadget: Repair 'dwc2_hsotg_core_init_disconnected()'s documentationLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/gadget.c:3349: warning: expecting prototype for dwc2_hsotg_core_init(). Prototype was for dwc2_hsotg_core_init_disconnected() instead Cc: Minas Harutyunyan <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Ben Dooks <[email protected]> Cc: [email protected] Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: dwc2: pci: Fix possible copy/paste issueLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/pci.c:73: warning: expecting prototype for dwc2_pci_probe(). Prototype was for dwc2_pci_remove() instead Cc: Minas Harutyunyan <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: dwc2: hcd_queue: Fix typeo in function name 'dwc2_hs_pmap_unschedule()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/hcd_queue.c:686: warning: expecting prototype for dwc2_ls_pmap_unschedule(). Prototype was for dwc2_hs_pmap_unschedule() instead Cc: Minas Harutyunyan <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: isp1760: isp1760-udc: Provide missing description for 'udc' paramLee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/isp1760/isp1760-udc.c:150: warning: Function parameter or member 'udc' not described in 'isp1760_udc_select_ep' Cc: Greg Kroah-Hartman <[email protected]> Cc: Rui Miguel Silva <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: [email protected] Reviewed-by: Rui Miguel Silva <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: dwc2: params: Fix naming of 'dwc2_get_hwparams()' in the docsLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/params.c:787: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Minas Harutyunyan <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: common: ulpi: Add leading underscores for function name ↵Lee Jones1-1/+1
'__ulpi_register_driver()' Fixes the following W=1 kernel build warning(s): drivers/usb/common/ulpi.c:151: warning: expecting prototype for ulpi_register_driver(). Prototype was for __ulpi_register_driver() instead Cc: Heikki Krogerus <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: dwc2: platform: Provide function name for 'dwc2_check_core_version()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/dwc2/platform.c:411: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Minas Harutyunyan <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Philipp Zabel <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: Matthijs Kooijman <[email protected]> Cc: [email protected] Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdns3: cdnsp-gadget: Provide function name for 'cdnsp_find_next_ext_cap()'Lee Jones1-1/+2
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdnsp-gadget.c:59: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Pawel Laszczak <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdns3: cdns3-gadget: Provide correct function naming for ↵Lee Jones1-1/+1
'__cdns3_gadget_ep_queue()' Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdns3-gadget.c:2499: warning: expecting prototype for cdns3_gadget_ep_queue(). Prototype was for __cdns3_gadget_ep_queue() instead Cc: Peter Chen <[email protected]> Cc: Pawel Laszczak <[email protected]> Cc: Roger Quadros <[email protected]> Cc: Aswath Govindraju <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Pawel Jez <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: chipidea: udc: Fix incorrectly documented function ↵Lee Jones1-1/+1
'hw_port_is_high_speed()' Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/udc.c:247: warning: expecting prototype for hw_is_port_high_speed(). Prototype was for hw_port_is_high_speed() instead Cc: Peter Chen <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: chipidea: otg: Fix formatting and missing documentation issuesLee Jones1-4/+5
Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/otg.c:25: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/chipidea/otg.c:78: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/chipidea/otg.c:143: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Peter Chen <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: chipidea: core: Fix incorrectly documented function 'ci_usb_phy_exit()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/chipidea/core.c:343: warning: expecting prototype for _ci_usb_phy_exit(). Prototype was for ci_usb_phy_exit() instead Cc: Peter Chen <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Liam Girdwood <[email protected]> Cc: Mark Brown <[email protected]> Cc: David Lopo <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdns3: cdns3-imx: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdns3-imx.c:21: warning: expecting prototype for cdns3(). Prototype was for USB3_CORE_CTRL1() instead Cc: Peter Chen <[email protected]> Cc: Pawel Laszczak <[email protected]> Cc: Roger Quadros <[email protected]> Cc: Aswath Govindraju <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Shawn Guo <[email protected]> Cc: Sascha Hauer <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: Fabio Estevam <[email protected]> Cc: NXP Linux Team <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdns3: cdns3-ep0: Fix a few kernel-doc formatting issuesLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdns3-ep0.c:680: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-ep0.c:775: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-ep0.c:868: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Peter Chen <[email protected]> Cc: Pawel Laszczak <[email protected]> Cc: Roger Quadros <[email protected]> Cc: Aswath Govindraju <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Pawel Jez <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdns3: cdns3-ti: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdns3-ti.c:20: warning: expecting prototype for cdns3(). Prototype was for USBSS_PID() instead Cc: Peter Chen <[email protected]> Cc: Pawel Laszczak <[email protected]> Cc: Roger Quadros <[email protected]> Cc: Aswath Govindraju <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdns3: cdns3-gadget: Fix a bunch of kernel-doc related formatting issuesLee Jones1-17/+17
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdns3-gadget.c:163: warning: expecting prototype for select_ep(). Prototype was for cdns3_select_ep() instead drivers/usb/cdns3/cdns3-gadget.c:2025: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2224: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2264: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2399: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2489: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2589: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2656: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2677: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2722: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2768: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2877: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2923: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/usb/cdns3/cdns3-gadget.c:2986: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Peter Chen <[email protected]> Cc: Pawel Laszczak <[email protected]> Cc: Roger Quadros <[email protected]> Cc: Aswath Govindraju <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Pawel Jez <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdns3: cdns3-plat: Fix incorrect naming of function 'cdns3_plat_remove()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/cdns3-plat.c:179: warning: expecting prototype for cdns3_remove(). Prototype was for cdns3_plat_remove() instead Cc: Peter Chen <[email protected]> Cc: Pawel Laszczak <[email protected]> Cc: Roger Quadros <[email protected]> Cc: Aswath Govindraju <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdns3: core: Fix a couple of incorrectly documented function namesLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/usb/cdns3/core.c:342: warning: expecting prototype for cdsn3_role_get(). Prototype was for cdns_role_get() instead drivers/usb/cdns3/core.c:428: warning: expecting prototype for cdns_probe(). Prototype was for cdns_init() instead Cc: Peter Chen <[email protected]> Cc: Pawel Laszczak <[email protected]> Cc: Roger Quadros <[email protected]> Cc: Aswath Govindraju <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Acked-by: Peter Chen <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27driver core: Move the "removable" attribute from USB to coreRajat Jain2-30/+7
Move the "removable" attribute from USB to core in order to allow it to be supported by other subsystem / buses. Individual buses that want to support this attribute can populate the removable property of the device while enumerating it with the 3 possible values - - "unknown" - "fixed" - "removable" Leaving the field unchanged (i.e. "not supported") would mean that the attribute would not show up in sysfs for that device. The UAPI (location, symantics etc) for the attribute remains unchanged. Move the "removable" attribute from USB to the device core so it can be used by other subsystems / buses. By default, devices do not have a "removable" attribute in sysfs. If a subsystem or bus driver wants to support a "removable" attribute, it should call device_set_removable() before calling device_register() or device_add(), e.g.: device_set_removable(dev, DEVICE_REMOVABLE); device_register(dev); The possible values and the resulting sysfs attribute contents are: DEVICE_REMOVABLE_UNKNOWN -> "unknown" DEVICE_REMOVABLE -> "removable" DEVICE_FIXED -> "fixed" Convert the USB "removable" attribute to use this new device core functionality. There should be no user-visible change in the location or semantics of attribute for USB devices. Reviewed-by: Bjorn Helgaas <[email protected]> Signed-off-by: Rajat Jain <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27USB: fotg210-hcd: remove dentry storage for debugfs fileGreg Kroah-Hartman2-5/+3
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27USB: gadget: pxa27x_udc: remove dentry storage for debugfs fileGreg Kroah-Hartman2-7/+1
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Cc: Daniel Mack <[email protected]> Cc: Haojian Zhuang <[email protected]> Cc: Robert Jarzmik <[email protected]> Cc: Felipe Balbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27USB: gadget: bcm63xx_udc: remove dentry storage for debugfs fileGreg Kroah-Hartman1-6/+1
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Cc: Kevin Cernekee <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27USB: chipidea: remove dentry storage for debugfs fileGreg Kroah-Hartman2-22/+14
There is no need to store the dentry pointer for a debugfs file that we only use to remove it when the device goes away. debugfs can do the lookup for us instead, saving us some trouble, and making things smaller overall. Cc: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: dwc3: trace: Remove unused fields in dwc3_log_trbMayank Rana1-2/+0
Commit 0bd0f6d201eb ("usb: dwc3: gadget: remove allocated/queued request tracking") removed the allocated & queued fields from struct dwc3_ep but neglected to also remove them from the dwc3_log_trb event class's TP_STRUCT definition which are now unused. Remove them to save eight bytes per trace event entry. Signed-off-by: Mayank Rana <[email protected]> Signed-off-by: Jack Pham <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: typec: mux: Remove requirement for the "orientation-switch" device propertyHeikki Krogerus1-3/+0
The additional boolean device property "orientation-switch" is not needed when the connection is described with device graph, so removing the check and the requirement for it. Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: typec: mux: Use device type instead of device name for matchingHeikki Krogerus2-16/+16
Both the USB Type-C switch and mux have already a device type defined for them. We can use those types instead of the device name to differentiate the two. Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: common: usb-conn-gpio: use usb_role_string() to print role statusChunfeng Yun1-3/+3
Use usb_role_string() to print role status, make the log readable. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: roles: add helper usb_role_string()Chunfeng Yun1-0/+9
Introduces usb_role_string() function, which returns a human-readable name of provided usb role, it's useful to make the log readable. Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-05-27usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handlerPawel Laszczak1-3/+4
Patch fixes the following critical issue caused by deadlock which has been detected during testing NCM class: smp: csd: Detected non-responsive CSD lock (#1) on CPU#0 smp: csd: CSD lock (#1) unresponsive. .... RIP: 0010:native_queued_spin_lock_slowpath+0x61/0x1d0 RSP: 0018:ffffbc494011cde0 EFLAGS: 00000002 RAX: 0000000000000101 RBX: ffff9ee8116b4a68 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494011cde0 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: 0000000000000246 R15: ffff9ee8116b4658 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7bcc41a830 CR3: 000000007a612003 CR4: 00000000001706e0 Call Trace: <IRQ> do_raw_spin_lock+0xc0/0xd0 _raw_spin_lock_irqsave+0x95/0xa0 cdnsp_gadget_ep_queue.cold+0x88/0x107 [cdnsp_udc_pci] usb_ep_queue+0x35/0x110 eth_start_xmit+0x220/0x3d0 [u_ether] ncm_tx_timeout+0x34/0x40 [usb_f_ncm] ? ncm_free_inst+0x50/0x50 [usb_f_ncm] __hrtimer_run_queues+0xac/0x440 hrtimer_run_softirq+0x8c/0xb0 __do_softirq+0xcf/0x428 asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x61/0x70 irq_exit_rcu+0xc1/0xd0 sysvec_apic_timer_interrupt+0x52/0xb0 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:do_raw_spin_trylock+0x18/0x40 RSP: 0018:ffffbc494138bda8 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff9ee8116b4658 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9ee8116b4658 RBP: ffffbc494138bda8 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ee8116b4670 R11: 0000000000000000 R12: ffff9ee8116b4658 R13: ffff9ee8116b4670 R14: ffff9ee7b5c73d80 R15: ffff9ee8116b4000 _raw_spin_lock+0x3d/0x70 ? cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] cdnsp_thread_irq_handler.cold+0x32/0x112c [cdnsp_udc_pci] ? cdnsp_remove_request+0x1f0/0x1f0 [cdnsp_udc_pci] ? cdnsp_thread_irq_handler+0x5/0xa0 [cdnsp_udc_pci] ? irq_thread+0xa0/0x1c0 irq_thread_fn+0x28/0x60 irq_thread+0x105/0x1c0 ? __kthread_parkme+0x42/0x90 ? irq_forced_thread_fn+0x90/0x90 ? wake_threads_waitq+0x30/0x30 ? irq_thread_check_affinity+0xe0/0xe0 kthread+0x12a/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 The root cause of issue is spin_lock/spin_unlock instruction instead spin_lock_irqsave/spin_lock_irqrestore in cdnsp_thread_irq_handler function. Cc: [email protected] Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Peter Chen <[email protected]>
2021-05-25xhci: Fix 5.12 regression of missing xHC cache clearing command after a StallMathias Nyman1-2/+6
If endpoints halts due to a stall then the dequeue pointer read from hardware may already be set ahead of the stalled TRB. After commit 674f8438c121 ("xhci: split handling halted endpoints into two steps") in 5.12 xhci driver won't issue a Set TR Dequeue if hardware dequeue pointer is already in the right place. Turns out the "Set TR Dequeue pointer" command is anyway needed as it in addition to moving the dequeue pointer also clears endpoint state and cache. Fixes: 674f8438c121 ("xhci: split handling halted endpoints into two steps") Cc: <[email protected]> # 5.12 Reported-by: Peter Ganzhorn <[email protected]> Tested-by: Peter Ganzhorn <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.