aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2022-02-14usbip: vudc: Make use of the helper macro LIST_HEAD()Cai Huoqing1-1/+1
Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. LIST_HEAD() helps to clean up the code "struct list_head vudc_devices =", only to care about the variable 'vudc_devices'. Reviewed-by: Shuah Khan <[email protected]> Signed-off-by: Cai Huoqing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-14usb: ulpi: Add debugfs supportSean Anderson1-1/+70
This adds a debugfs file for ULPI devices which contains a dump of their registers. This is useful for debugging basic connectivity problems. The file is created in ulpi_register because many devices will never have a driver bound (as they are managed in hardware by the USB controller device). The root directory of this subsystem is created before we register the bus to ensure that devices can always create their directories. Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-14Merge 5.17-rc4 into usb-nextGreg Kroah-Hartman16-28/+97
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-12Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"Greg Kroah-Hartman1-4/+2
This reverts commit 269cbcf7b72de6f0016806d4a0cec1d689b55a87. It causes build errors as reported by the kernel test robot. Link: https://lore.kernel.org/r/[email protected] Reported-by: kernel test robot <[email protected]> Fixes: 269cbcf7b72d ("usb: dwc2: drd: fix soft connect when gadget is unconfigured") Cc: [email protected] Cc: Amelie Delaunay <[email protected]> Cc: Minas Harutyunyan <[email protected]> Cc: Fabrice Gasnier <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11Merge tag 'usb-serial-5.17-rc4' of ↵Greg Kroah-Hartman5-0/+11
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.17-rc4 Here are some new device ids for 5.17-rc4. All have been in linux-next with no reported issues. * tag 'usb-serial-5.17-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cp210x: add CPI Bulk Coin Recycler id USB: serial: cp210x: add NCR Retail IO box id USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320 USB: serial: option: add ZTE MF286D modem USB: serial: ch341: add support for GW Instek USB2.0-Serial devices
2022-02-11usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)Souradeep Chowdhury3-0/+262
Add support for control peripheral of EUD (Embedded USB Debugger) to listen to events such as USB attach/detach, pet EUD to indicate software is functional.Reusing the platform device kobj, sysfs entry 'enable' is created to enable or disable EUD. To enable the eud the following needs to be done echo 1 > /sys/bus/platform/.../enable To disable eud, following is the command echo 0 > /sys/bus/platform/.../enable Signed-off-by: Souradeep Chowdhury <[email protected]> Link: https://lore.kernel.org/r/0ac5c2b2c8e4ce4f4f342a08b48cfc61aeaf7ee8.1644339918.git.quic_schowdhu@quicinc.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11usb: typec: rt1719: Add support for Richtek RT1719ChiYuan Huang3-0/+974
Richtek RT1719 is a sink-only Type-C PD controller it complies with latest USB Type-C and PD standards. It integrates the physical layer of USB power delivery protocol to allow up to 100W of power. Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: ChiYuan Huang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11usb: xhci-mtk: add support ip-sleep wakeup for mt8195Chunfeng Yun1-0/+37
Add support ip-sleep wakeup for mt8195, it's a specific revision for each USB controller, and not following IPM rule. Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11usb: dwc2: Add platform specific data for Intel's AgilexDinh Nguyen1-0/+10
The DWC2 IP on the Agilex platform does not support clock-gating. Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Dinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11USB: usbfs: Use a spinlock instead of atomic accesses to tally used memory.Ingo Rohloff1-10/+22
While the existing code code imposes a limit on the used memory, it might be over pessimistic (even if this is unlikely). Example scenario: 8 threads running in parallel, all entering "usbfs_increase_memory_usage()" at the same time. The atomic accesses in "usbfs_increase_memory_usage()" could be serialized like this: 8 x "atomic64_add" 8 x "atomic64_read" If the 8 x "atomic64_add" raise "usbfs_memory_usage" above the limit, then all 8 calls of "usbfs_increase_memory_usage()" will return with -ENOMEM. If you instead serialize over the whole access to "usbfs_memory_usage" by using a spinlock, some of these calls will succeed. Acked-by: Alan Stern <[email protected]> Signed-off-by: Ingo Rohloff <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11usb: dwc2: drd: fix soft connect when gadget is unconfiguredFabrice Gasnier1-2/+4
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: [email protected] Reviewed-by: Amelie Delaunay <[email protected]> Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Fabrice Gasnier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11usb: gadget: rndis: check size of RNDIS_MSG_SET commandGreg Kroah-Hartman1-3/+6
Check the size of the RNDIS_MSG_SET command given to us before attempting to respond to an invalid message size. Reported-by: Szymon Heidrich <[email protected]> Cc: [email protected] Tested-by: Szymon Heidrich <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11USB: gadget: validate interface OS descriptor requestsSzymon Heidrich1-0/+3
Stall the control endpoint in case provided index exceeds array size of MAX_CONFIG_INTERFACES or when the retrieved function pointer is null. Signed-off-by: Szymon Heidrich <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-11usb: core: Unregister device on component_add() failureFabio M. De Francesco1-3/+6
Commit 8c67d06f3fd9 ("usb: Link the ports to the connectors they are attached to") creates a link to the USB Type-C connector for every new port that is added when possible. If component_add() fails, usb_hub_create_port_device() prints a warning but does not unregister the device and does not return errors to the callers. Syzbot reported a "WARNING in component_del()". Fix this issue in usb_hub_create_port_device by calling device_unregister() and returning the errors from component_add(). Fixes: 8c67d06f3fd9 ("usb: Link the ports to the connectors they are attached to") Reported-and-tested-by: [email protected] Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Fabio M. De Francesco <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-09spi: make remove callback a void functionUwe Kleine-König2-5/+2
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <[email protected]> Acked-by: Marc Kleine-Budde <[email protected]> Acked-by: Andy Shevchenko <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Jérôme Pouiller <[email protected]> Acked-by: Miquel Raynal <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Claudius Heine <[email protected]> Acked-by: Stefan Schmidt <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Acked-by: Ulf Hansson <[email protected]> # For MMC Acked-by: Marcus Folkesson <[email protected]> Acked-by: Łukasz Stelmach <[email protected]> Acked-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-02-08usb: ehci: add pci device support for Aspeed platformsNeal Liu1-0/+9
Enable Aspeed quirks in commit 7f2d73788d90 ("usb: ehci: handshake CMD_RUN instead of STS_HALT") to support Aspeed ehci-pci device. Acked-by: Alan Stern <[email protected]> Signed-off-by: Neal Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-08usb: dwc3: gadget: Prevent core from processing stale TRBsUdipto Goswami1-0/+13
With CPU re-ordering on write instructions, there might be a chance that the HWO is set before the TRB is updated with the new mapped buffer address. And in the case where core is processing a list of TRBs it is possible that it fetched the TRBs when the HWO is set but before the buffer address is updated. Prevent this by adding a memory barrier before the HWO is updated to ensure that the core always process the updated TRBs. Fixes: f6bafc6a1c9d ("usb: dwc3: convert TRBs into bitshifts") Cc: stable <[email protected]> Reviewed-by: Pavankumar Kondeti <[email protected]> Signed-off-by: Udipto Goswami <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-08usb: dwc3: Program GFLADJSean Anderson2-1/+41
GUCTL.REFCLKPER can only account for clock frequencies with integer periods. To address this, program REFCLK_FLADJ with the relative error caused by period truncation. The formula given in the register reference has been rearranged to allow calculation based on rate (instead of period), and to allow for fixed-point arithmetic. Additionally, calculate a value for 240MHZDECR. This configures a simulated 240Mhz clock using a counter with one fractional bit (PLS1). This register is programmed only for versions >= 2.50a, since this is the check also used by commit db2be4e9e30c ("usb: dwc3: Add frame length adjustment quirk"). Tested-by: Robert Hancock <[email protected]> Reviewed-by: Robert Hancock <[email protected]> Reviewed-by: Thinh Nguyen <[email protected]> Signed-off-by: Sean Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-08usb: dwc3: Calculate REFCLKPER based on reference clockSean Anderson1-2/+12
Instead of using a special property to determine the reference clock period, use the rate of the reference clock. When we have a legacy snps,ref-clock-period-ns property and no reference clock, use it instead. Fractional clocks are not currently supported, and will be dealt with in the next commit. Tested-by: Robert Hancock <[email protected]> Reviewed-by: Robert Hancock <[email protected]> Reviewed-by: Thinh Nguyen <[email protected]> Signed-off-by: Sean Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-08usb: dwc3: Get clocks individuallySean Anderson2-17/+57
Instead of grabbing all clocks in bulk, grab them individually. This will allow us to get the frequency or otherwise deal with discrete clocks. This may break some platforms if they use a clock which doesn't use one of the documented names. Reviewed-by: Robert Hancock <[email protected]> Signed-off-by: Sean Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-07scsi: usb: storage: Complete the SCSI request directlySebastian Andrzej Siewior1-1/+1
The USB storage driver can complete its requests directly from a kernel thread. Use scsi_done_direct() to avoid waking ksoftirqd. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-02-04usb: gadget: f_uac2: Neaten and reduce size of afunc_validate_optsJoe Perches1-53/+38
Remove the repetition and reduce the object size a bit. $ size drivers/usb/gadget/function/f_uac2.o* (x86-64 defconfig with gadget) text data bss dec hex filename 24515 3136 16 27667 6c13 drivers/usb/gadget/function/f_uac2.o.new 24817 3136 16 27969 6d41 drivers/usb/gadget/function/f_uac2.o.old Signed-off-by: Joe Perches <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-04usb: gadget: f_uac2: change maxpctksize/maxpcktsize to wMaxPacketSizeColin Ian King1-2/+2
The spelling of maxpctksize and maxpcktsize is inconsistent, rename them both to wMaxPacketSize instead. Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-02-01USB: serial: cp210x: add CPI Bulk Coin Recycler idJohan Hovold1-0/+1
Add the device id for the Crane Payment Innovation / Money Controls Bulk Coin Recycler: https://www.cranepi.com/en/system/files/Support/OM_BCR_EN_V1-04_0.pdf Reported-by: Scott Russell <[email protected]> Cc: [email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2022-02-01USB: serial: cp210x: add NCR Retail IO box idJohan Hovold1-0/+1
Add the device id for NCR's Retail IO box (CP2105) used in NCR FastLane SelfServ Checkout - R6C: https://www.ncr.com/product-catalog/ncr-fastlane-selfserv-checkout-r6c Reported-by: Scott Russell <[email protected]> Cc: [email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2022-02-01USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320Cameron Williams2-0/+6
This patch adds support for the Brainboxes US-159, US-235 and US-320 USB-to-Serial devices. Signed-off-by: Cameron Williams <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-01-31usb: gadget: f_uac2: Add speed names to bInterval dbg/warnPavel Hofman1-4/+14
Add speed names for better clarity of dgb/warn messages from max packet size/bInterval checks. Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: gadget: f_uac2: Optionally determine bInterval for HS and SSPavel Hofman2-43/+87
Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set to 0, determine the largest bInterval (4 to 1) for which the required bandwidth of the max samplerate fits the max allowed packet size. If the required bandwidth exceeds max bandwidth for single-packet mode (ep->mc=1), keep bInterval at 1. The FS speed is left at fixed bInterval=1. If for any speed the required bandwidth exceeds the max bandwidth corresponding to the selected/determined bInterval, print a warning. Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: gadget: audio: Add HS/SS bInterval params for UAC2Pavel Hofman1-0/+15
Allow configuring the existing f_uac2 configfs bInterval params through parameters of the gaudio module. Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: gadget: f_uac2: Add HS/SS bInterval to configfsPavel Hofman2-4/+31
Allow configuring the HS/SS bInterval through configfs, via parameters p_hs_bint/c_hs_bint separately for playback/capture. The default param values are left at the original 4. Suggested-by: John Keeping <[email protected]> Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: udc: Fix typo in commenttangmeng1-1/+1
Replace disbale with disable Signed-off-by: tangmeng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31USB: ACPI: Replace acpi_bus_get_device()Rafael J. Wysocki1-1/+1
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://lore.kernel.org/r/1899393.PYKUYFuaPT@kreacher Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: gadget: f_uac2: Define specific wTerminalTypePavel Hofman1-2/+2
Several users have reported that their Win10 does not enumerate UAC2 gadget with the existing wTerminalType set to UAC_INPUT_TERMINAL_UNDEFINED/UAC_INPUT_TERMINAL_UNDEFINED, e.g. https://github.com/raspberrypi/linux/issues/4587#issuecomment-926567213. While the constant is officially defined by the USB terminal types document, e.g. XMOS firmware for UAC2 (commonly used for Win10) defines no undefined output terminal type in its usbaudio20.h header. Therefore wTerminalType of EP-IN is set to UAC_INPUT_TERMINAL_MICROPHONE and wTerminalType of EP-OUT to UAC_OUTPUT_TERMINAL_SPEAKER for the UAC2 gadget. Signed-off-by: Pavel Hofman <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transitionAdam Ford1-0/+2
The support the external role switch a variety of situations were addressed, but the transition from USB_ROLE_HOST to USB_ROLE_NONE leaves the host up which can cause some error messages when switching from host to none, to gadget, to none, and then back to host again. xhci-hcd ee000000.usb: Abort failed to stop command ring: -110 xhci-hcd ee000000.usb: xHCI host controller not responding, assume dead xhci-hcd ee000000.usb: HC died; cleaning up usb 4-1: device not accepting address 6, error -108 usb usb4-port1: couldn't allocate usb_device After this happens it will not act as a host again. Fix this by releasing the host mode when transitioning to USB_ROLE_NONE. Fixes: 0604160d8c0b ("usb: gadget: udc: renesas_usb3: Enhance role switch support") Cc: stable <[email protected]> Reviewed-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Adam Ford <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: raw-gadget: fix handling of dual-direction-capable endpointsJann Horn1-1/+1
Under dummy_hcd, every available endpoint is *either* IN or OUT capable. But with some real hardware, there are endpoints that support both IN and OUT. In particular, the PLX 2380 has four available endpoints that each support both IN and OUT. raw-gadget currently gets confused and thinks that any endpoint that is usable as an IN endpoint can never be used as an OUT endpoint. Fix it by looking at the direction in the configured endpoint descriptor instead of looking at the hardware capabilities. With this change, I can use the PLX 2380 with raw-gadget. Fixes: f2c2e717642c ("usb: gadget: add raw-gadget interface") Cc: stable <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Reviewed-by: Andrey Konovalov <[email protected]> Signed-off-by: Jann Horn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: usb251xb: add boost-up property supportTommaso Merciai1-1/+3
Add support for boost-up register of usb251xb hub. boost-up property control USB electrical drive strength This register can be set: - Normal mode -> 0x00 - Low -> 0x01 - Medium -> 0x10 - High -> 0x11 (Normal Default) References: - http://www.mouser.com/catalog/specsheets/2514.pdf p29 Reviewed-by: Richard Leitner <[email protected]> Signed-off-by: Tommaso Merciai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: ulpi: Call of_node_put correctlySean Anderson1-2/+6
of_node_put should always be called on device nodes gotten from of_get_*. Additionally, it should only be called after there are no remaining users. To address the first issue, call of_node_put if later steps in ulpi_register fail. To address the latter, call put_device if device_register fails, which will call ulpi_dev_release if necessary. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Sean Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: ulpi: Move of_node_put to ulpi_dev_releaseSean Anderson1-1/+1
Drivers are not unbound from the device when ulpi_unregister_interface is called. Move of_node-freeing code to ulpi_dev_release which is called only after all users are gone. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Sean Anderson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31USB: serial: option: add ZTE MF286D modemPawel Dembicki1-0/+2
Modem from ZTE MF286D is an Qualcomm MDM9250 based 3G/4G modem. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=19d2 ProdID=1485 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=MF286DZTED000000 C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=ff Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Pawel Dembicki <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-01-31USB: serial: ch341: add support for GW Instek USB2.0-Serial devicesStephan Brunner1-0/+1
Programmable lab power supplies made by GW Instek, such as the GPP-2323, have a USB port exposing a serial port to control the device. Stringing the supplied Windows driver, references to the ch341 chip are found. Binding the existing ch341 driver to the VID/PID of the GPP-2323 ("GW Instek USB2.0-Serial" as per the USB product name) works out of the box, communication and control is now possible. This patch should work with any GPP series power supply due to similarities in the product line. Signed-off-by: Stephan Brunner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-01-31usb: f_fs: Fix use-after-free for epfileUdipto Goswami1-14/+42
Consider a case where ffs_func_eps_disable is called from ffs_func_disable as part of composition switch and at the same time ffs_epfile_release get called from userspace. ffs_epfile_release will free up the read buffer and call ffs_data_closed which in turn destroys ffs->epfiles and mark it as NULL. While this was happening the driver has already initialized the local epfile in ffs_func_eps_disable which is now freed and waiting to acquire the spinlock. Once spinlock is acquired the driver proceeds with the stale value of epfile and tries to free the already freed read buffer causing use-after-free. Following is the illustration of the race: CPU1 CPU2 ffs_func_eps_disable epfiles (local copy) ffs_epfile_release ffs_data_closed if (last file closed) ffs_data_reset ffs_data_clear ffs_epfiles_destroy spin_lock dereference epfiles Fix this races by taking epfiles local copy & assigning it under spinlock and if epfiles(local) is null then update it in ffs->epfiles then finally destroy it. Extending the scope further from the race, protecting the ep related structures, and concurrent accesses. Fixes: a9e6f83c2df1 ("usb: gadget: f_fs: stop sleeping in ffs_func_eps_disable") Co-developed-by: Udipto Goswami <[email protected]> Reviewed-by: John Keeping <[email protected]> Signed-off-by: Pratham Pratap <[email protected]> Signed-off-by: Udipto Goswami <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31usb: dwc3: xilinx: fix uninitialized return valueRobert Hancock1-1/+1
A previous patch to skip part of the initialization when a USB3 PHY was not present could result in the return value being uninitialized in that case, causing spurious probe failures. Initialize ret to 0 to avoid this. Fixes: 9678f3361afc ("usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode") Cc: <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Robert Hancock <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-31Merge tag 'v5.17-rc2' into usb-nextGreg Kroah-Hartman15-15/+109
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-26usb: cdnsp: Fix segmentation fault in cdns_lost_power functionPawel Laszczak1-3/+3
CDNSP driver read not initialized cdns->otg_v0_regs which lead to segmentation fault. Patch fixes this issue. Fixes: 2cf2581cd229 ("usb: cdns3: add power lost support for system resume") cc: <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-26usb: gadget: f_uac2: allow changing interface name via configfsYunhao Tian2-1/+47
This adds "function_name" configfs entry to change string value of the iInterface field. This field will be shown in Windows' audio settings panel, so being able to change it is useful. It will default to "Source/Sink" just as before. Signed-off-by: Yunhao Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-26usb: gadget: f_uac1: allow changing interface name via configfsYunhao Tian2-1/+47
This adds "function_name" configfs entry to change string value of the iInterface field. This field will be shown in Windows' audio settings panel, so being able to change it is useful. It will default to "AC Interface" just as before if unchanged. Signed-off-by: Yunhao Tian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-26usb: gadget: f_uac1: Add suspend callbackPavel Hofman1-0/+9
Add suspend callback to f_uac1 function, calling corresponding method of u_audio in order to stop the respective PCM streams and to notify subscribed clients about the stop. Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-26usb: gadget: f_uac2: Add suspend callbackPavel Hofman1-0/+9
When USB cable gets disconnected, the undergoing playback/capture stalls, without any notification to u_audio about the change. Experiments with a dwc2 gadget revealed that Suspend interrupt is thrown at cable disconnection, which the gadget framework translates to calling suspend callback of a function, if it is defined. Add the suspend callback to f_uac2 function, calling corresponding method of u_audio in order to stop the respective PCM streams and to notify subscribed clients at cable disconnection. Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-26usb: gadget: u_audio: Add suspend callPavel Hofman2-0/+11
Add exported method u_audio_suspend which sets stream status to inactive and sends notifications. The method does not free any resources. Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-26usb: gadget: u_audio: Rate ctl notifies about current srate (0=stopped)Pavel Hofman1-1/+27
The Playback/Capture ctl currently reports rate value set by USB control selector UAC2_CS_CONTROL_SAM_FREQ (fixed for UAC1). When the stops playback/capture, the reported value does not change. The gadget side has no information whether the host has started/stopped capture/playback. This patch sets the value reported by the respective rate ctl to zero when the host side has stopped playback/capture. Also, it calls snd_ctl_notify when start/stop occurs, so that a subscribed client can act appropriately. Tests have confirmed that USB hosts change UAC2_CS_CONTROL_SAM_FREQ before switching altsetting to activate playback/capture, resulting in correct order (params->c/p_srate is set to requested rate before u_audio_start_capture/playback is called). The gadget rate notifications are used by user-space audio gadget controller gaudio_ctl https://github.com/pavhofman/gaudio_ctl. Signed-off-by: Pavel Hofman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.