aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2023-07-25Revert "usb: xhci: tegra: Fix error check"Dan Carpenter1-4/+4
This reverts commit 18fc7c435be3f17ea26a21b2e2312fcb9088e01f. The reverted commit was based on static analysis and a misunderstanding of how PTR_ERR() and NULLs are supposed to work. When a function returns both pointer errors and NULL then normally the NULL means "continue operating without a feature because it was deliberately turned off". The NULL should not be treated as a failure. If a driver cannot work when that feature is disabled then the KConfig should enforce that the function cannot return NULL. We should not need to test for it. In this code, the patch means that certain tegra_xusb_probe() will fail if the firmware supports power-domains but CONFIG_PM is disabled. Signed-off-by: Dan Carpenter <[email protected]> Fixes: 18fc7c435be3 ("usb: xhci: tegra: Fix error check") Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25USB: gadget: Fix the memory leak in raw_gadget driverZqiang1-4/+6
Currently, increasing raw_dev->count happens before invoke the raw_queue_event(), if the raw_queue_event() return error, invoke raw_release() will not trigger the dev_free() to be called. [ 268.905865][ T5067] raw-gadget.0 gadget.0: failed to queue event [ 268.912053][ T5067] udc dummy_udc.0: failed to start USB Raw Gadget: -12 [ 268.918885][ T5067] raw-gadget.0: probe of gadget.0 failed with error -12 [ 268.925956][ T5067] UDC core: USB Raw Gadget: couldn't find an available UDC or it's busy [ 268.934657][ T5067] misc raw-gadget: fail, usb_gadget_register_driver returned -16 BUG: memory leak [<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [<ffffffff8347eb55>] kmalloc include/linux/slab.h:582 [inline] [<ffffffff8347eb55>] kzalloc include/linux/slab.h:703 [inline] [<ffffffff8347eb55>] dev_new drivers/usb/gadget/legacy/raw_gadget.c:191 [inline] [<ffffffff8347eb55>] raw_open+0x45/0x110 drivers/usb/gadget/legacy/raw_gadget.c:385 [<ffffffff827d1d09>] misc_open+0x1a9/0x1f0 drivers/char/misc.c:165 [<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [<ffffffff8347cd2f>] kmalloc include/linux/slab.h:582 [inline] [<ffffffff8347cd2f>] raw_ioctl_init+0xdf/0x410 drivers/usb/gadget/legacy/raw_gadget.c:460 [<ffffffff8347dfe9>] raw_ioctl+0x5f9/0x1120 drivers/usb/gadget/legacy/raw_gadget.c:1250 [<ffffffff81685173>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff8154bf94>] kmalloc_trace+0x24/0x90 mm/slab_common.c:1076 [<ffffffff833ecc6a>] kmalloc include/linux/slab.h:582 [inline] [<ffffffff833ecc6a>] kzalloc include/linux/slab.h:703 [inline] [<ffffffff833ecc6a>] dummy_alloc_request+0x5a/0xe0 drivers/usb/gadget/udc/dummy_hcd.c:665 [<ffffffff833e9132>] usb_ep_alloc_request+0x22/0xd0 drivers/usb/gadget/udc/core.c:196 [<ffffffff8347f13d>] gadget_bind+0x6d/0x370 drivers/usb/gadget/legacy/raw_gadget.c:292 This commit therefore invoke kref_get() under the condition that raw_queue_event() return success. Reported-by: [email protected] Cc: stable <[email protected]> Closes: https://syzkaller.appspot.com/bug?extid=feb045d335c1fdde5bf7 Signed-off-by: Zqiang <[email protected]> Reviewed-by: Andrey Konovalov <[email protected]> Tested-by: Andrey Konovalov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25usb: gadget: core: remove unbalanced mutex_unlock in usb_gadget_activateMichael Grzeschik1-1/+0
Commit 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race") introduced one extra mutex_unlock of connect_lock in the usb_gadget_active function. Fixes: 286d9975a838 ("usb: gadget: udc: core: Prevent soft_connect_store() race") Cc: stable <[email protected]> Signed-off-by: Michael Grzeschik <[email protected]> Reviewed-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"Jakub Vanek2-19/+0
This reverts commit b138e23d3dff90c0494925b4c1874227b81bddf7. AutoRetry has been found to sometimes cause controller freezes when communicating with buggy USB devices. This controller feature allows the controller in host mode to send non-terminating/burst retry ACKs instead of terminating retry ACKs to devices when a transaction error (CRC error or overflow) occurs. Unfortunately, if the USB device continues to respond with a CRC error, the controller will not complete endpoint-related commands while it keeps trying to auto-retry. [3] The xHCI driver will notice this once it tries to abort the transfer using a Stop Endpoint command and does not receive a completion in time. [1] This situation is reported to dmesg: [sda] tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN [sda] tag#29 CDB: opcode=0x28 28 00 00 69 42 80 00 00 48 00 xhci-hcd: xHCI host not responding to stop endpoint command xhci-hcd: xHCI host controller not responding, assume dead xhci-hcd: HC died; cleaning up Some users observed this problem on an Odroid HC2 with the JMS578 USB3-to-SATA bridge. The issue can be triggered by starting a read-heavy workload on an attached SSD. After a while, the host controller would die and the SSD would disappear from the system. [1] Further analysis by Synopsys determined that controller revisions other than the one in Odroid HC2 are also affected by this. The recommended solution was to disable AutoRetry altogether. This change does not have a noticeable performance impact. [2] Revert the enablement commit. This will keep the AutoRetry bit in the default state configured during SoC design [2]. Fixes: b138e23d3dff ("usb: dwc3: core: Enable AutoRetry feature in the controller") Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/[email protected]/ [2] Link: https://lore.kernel.org/r/[email protected]/ [3] Cc: [email protected] Cc: Mauro Ribeiro <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Suggested-by: Thinh Nguyen <[email protected]> Signed-off-by: Jakub Vanek <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25Revert "xhci: add quirk for host controllers that don't update endpoint DCS"Oliver Neukum2-27/+2
This reverts commit 5255660b208aebfdb71d574f3952cf48392f4306. This quirk breaks at least the following hardware: 0b:00.0 0c03: 1106:3483 (rev 01) (prog-if 30 [XHCI]) Subsystem: 1106:3483 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 66 Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ Address: 00000000fee007b8 Data: 0000 Capabilities: [c4] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 89W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: xhci_hcd Kernel modules: xhci_pci with the quirk enabled it fails early with [ 0.754373] pci 0000:0b:00.0: xHCI HW did not halt within 32000 usec status = 0x1000 [ 0.754419] pci 0000:0b:00.0: quirk_usb_early_handoff+0x0/0x7a0 took 31459 usecs [ 2.228048] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 2.228053] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 7 [ 2.260073] xhci_hcd 0000:0b:00.0: Host halt failed, -110 [ 2.260079] xhci_hcd 0000:0b:00.0: can't setup: -110 [ 2.260551] xhci_hcd 0000:0b:00.0: USB bus 7 deregistered [ 2.260624] xhci_hcd 0000:0b:00.0: init 0000:0b:00.0 fail, -110 [ 2.260639] xhci_hcd: probe of 0000:0b:00.0 failed with error -110 The hardware in question is an external PCIe card. It looks to me like the quirk needs to be narrowed down. But this needs information about the hardware showing the issue this quirk is to fix. So for now a clean revert. Signed-off-by: Oliver Neukum <[email protected]> Fixes: 5255660b208a ("xhci: add quirk for host controllers that don't update endpoint DCS") Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25USB: quirks: add quirk for Focusrite ScarlettŁukasz Bartosik1-0/+4
The Focusrite Scarlett audio device does not behave correctly during resumes. Below is what happens during every resume (captured with Beagle 5000): <Suspend> <Resume> <Reset>/<Chirp J>/<Tiny J> <Reset/Target disconnected> <High Speed> The Scarlett disconnects and is enumerated again. However from time to time it drops completely off the USB bus during resume. Below is captured occurrence of such an event: <Suspend> <Resume> <Reset>/<Chirp J>/<Tiny J> <Reset>/<Chirp K>/<Tiny K> <High Speed> <Corrupted packet> <Reset/Target disconnected> To fix the condition a user has to unplug and plug the device again. With USB_QUIRK_RESET_RESUME applied ("usbcore.quirks=1235:8211:b") for the Scarlett audio device the issue still reproduces. Applying USB_QUIRK_DISCONNECT_SUSPEND ("usbcore.quirks=1235:8211:m") fixed the issue and the Scarlett audio device didn't drop off the USB bus for ~5000 suspend/resume cycles where originally issue reproduced in ~100 or less suspend/resume cycles. Signed-off-by: Łukasz Bartosik <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25usb: xhci-mtk: set the dma max_seg_sizeRicardo Ribalda1-0/+1
Allow devices to have dma operations beyond 64K, and avoid warnings such as: DMA-API: xhci-mtk 11200000.usb: mapping sg segment longer than device claims to support [len=98304] [max=65536] Fixes: 0cbd4b34cda9 ("xhci: mediatek: support MTK xHCI host controller") Cc: stable <[email protected]> Tested-by: Zubin Mithra <[email protected]> Reported-by: Zubin Mithra <[email protected]> Signed-off-by: Ricardo Ribalda <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25usb: dwc3: don't reset device side if dwc3 was configured as host-onlyJisheng Zhang1-2/+2
Commit c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode") replaces check for HOST only dr_mode with current_dr_role. But during booting, the current_dr_role isn't initialized, thus the device side reset is always issued even if dwc3 was configured as host-only. What's more, on some platforms with host only dwc3, aways issuing device side reset by accessing device register block can cause kernel panic. Fixes: c4a5153e87fd ("usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode") Cc: stable <[email protected]> Signed-off-by: Jisheng Zhang <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25usb: typec: ucsi: move typec_set_mode(TYPEC_STATE_SAFE) to ↵Neil Armstrong1-2/+2
ucsi_unregister_partner() It's better to set TYPEC_STATE_SAFE mode from ucsi_unregister_partner() instead of ucsi_partner_change(), ucsi_unregister_partner() is always when the partner disconnects. Fixes: 25a2bc21c863 ("usb: typec: ucsi: call typec_set_mode on non-altmode partner change") Suggested-by: Heikki Krogerus <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/20230626-topic-sm8550-usb-c-audio-fixup-v1-1-bc72fddf3f42@linaro.org Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-25usb: ohci-at91: Fix the unhandle interrupt when resumeGuiting Shen1-1/+7
The ohci_hcd_at91_drv_suspend() sets ohci->rh_state to OHCI_RH_HALTED when suspend which will let the ohci_irq() skip the interrupt after resume. And nobody to handle this interrupt. According to the comment in ohci_hcd_at91_drv_suspend(), it need to reset when resume from suspend(MEM) to fix by setting "hibernated" argument of ohci_resume(). Signed-off-by: Guiting Shen <[email protected]> Cc: stable <[email protected]> Reviewed-by: Alan Stern <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-07-20USB: serial: simple: sort driver entriesJohan Hovold1-33/+33
Sort the driver symbols alphabetically in order to make it more obvious where new driver entries should be added. Cc: [email protected] Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2023-07-20USB: serial: xr: add TIOCGRS485 and TIOCSRS485 ioctlsJarkko Sonninen1-1/+88
Exar devices like XR21B1411 can control an RS485 transceiver by automatically asserting the RTS#/RS485 pin before sending data and deasserting it when the last stop bit has been transmitted. The polarity of the RST#/RS485 signal is configurable and the hardware also supports half-duplex turn-around delay and address matching mode. Add support for enabling and disabling RS-485 mode and configuring the RST#/RS485 signal polarity using the TIOCGRS485 and TIOCSRS485 ioctls. Support for half-duplex turn-around delay and address matching mode are left unimplemented for now. User enables RS-485 mode by setting SER_RS485_ENABLED flag in struct serial_rs485 flags. User should also set either SER_RS485_RTS_ON_SEND or SER_RS485_RTS_AFTER_SEND to select the behaviour of the RTS#/RS485 pin. Setting SER_RS485_RTS_ON_SEND will drive RTS#/RS485 low during transmission. Signed-off-by: Jarkko Sonninen <[email protected]> [ johan: let SER_RS485_RTS_ON_SEND determine SER_RS485_RTS_AFTER_SEND ] Signed-off-by: Johan Hovold <[email protected]>
2023-07-20USB: serial: simple: add Kaufmann RKS+CAN VCPOliver Neukum1-0/+7
Add the device and product ID for this CAN bus interface / license dongle. The device is usable either directly from user space or can be attached to a kernel CAN interface with slcan_attach. Reported-by: Kaufmann Automotive GmbH <[email protected]> Tested-by: Kaufmann Automotive GmbH <[email protected]> Signed-off-by: Oliver Neukum <[email protected]> [ johan: amend commit message and move entries in sort order ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-07-20USB: serial: option: add Quectel EC200A module supportMohsen Tahmasebi1-0/+2
Add Quectel EC200A "DIAG, AT, MODEM": 0x6005: ECM / RNDIS + DIAG + AT + MODEM T: Bus=01 Lev=01 Prnt=02 Port=05 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=6005 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=0000 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms Signed-off-by: Mohsen Tahmasebi <[email protected]> Tested-by: Mostafa Ghofrani <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-07-20USB: serial: option: support Quectel EM060K_128Jerry Meng1-0/+4
EM060K_128 is EM060K's sub-model, having the same name "Quectel EM060K-GL" MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0128 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM060K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-07-13usb: convert to ctime accessor functionsJeff Layton3-12/+10
In later patches, we're going to change how the inode's ctime field is used. Switch to using accessor functions instead of raw accesses of inode->i_ctime. Acked-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Jan Kara <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2023-07-03Merge tag 'usb-6.5-rc1' of ↵Linus Torvalds209-1233/+8539
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver updates for 6.5-rc1. Included in here are: - Lots of USB4/Thunderbolt additions and updates for new hardware types and fixes as people are starting to get access to the hardware in the wild - new gadget controller driver, cdns2, added - new typec drivers added - xhci driver updates - typec driver updates - usbip driver fixes - usb-serial driver updates and fixes - lots of smaller USB driver updates All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (265 commits) usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HC usb: host: xhci: Do not re-initialize the XHCI HC if being removed usb: typec: nb7vpq904m: fix CONFIG_DRM dependency usbip: usbip_host: Replace strlcpy with strscpy usb: dwc3: gadget: Propagate core init errors to UDC during pullup USB: serial: option: add LARA-R6 01B PIDs usb: ulpi: Make container_of() no-op in to_ulpi_dev() usb: gadget: legacy: fix error return code in gfs_bind usb: typec: fsa4480: add support for Audio Accessory Mode usb: typec: fsa4480: rework mux & switch setup to handle more states usb: typec: ucsi: call typec_set_mode on non-altmode partner change USB: gadget: f_hid: make hidg_class a static const structure USB: gadget: f_printer: make usb_gadget_class a static const structure USB: mon: make mon_bin_class a static const structure USB: gadget: udc: core: make udc_class a static const structure USB: roles: make role_class a static const structure dt-bindings: usb: dwc3: Add interrupt-names property support for wakeup interrupt dt-bindings: usb: Add StarFive JH7110 USB controller dt-bindings: usb: dwc3: Add IPQ9574 compatible usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup" ...
2023-07-03Merge tag 'leds-next-6.5' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds Pull LED updates from Lee Jones: "New Drivers: - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs - Add support for Awinic AW20036/AW20054/AW20072 LEDs New Device Support: - Add support for PMI632 LPG to QCom LPG - Add support for PMI8998 to QCom Flash - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC New Functionality: - Implement the LP55xx Charge Pump - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC - Enable per-pin resolution Pinctrl in LEDs GPIO Fix-ups: - Allow thread to sleep by switching from spinlock to mutex - Add lots of Device Tree bindings / support - Adapt relationships / dependencies driven by Kconfig - Switch I2C drivers from .probe_new() to .probe() - Remove superfluous / duplicate code - Replace strlcpy() with strscpy() for efficiency and overflow prevention - Staticify various functions - Trivial: Fixing coding style - Simplify / reduce code Bug Fixes: - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename - Repair race between led_set_brightness(LED_{OFF,FULL}) - Fix Oops relating to sleeping in critical sections - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger - Do not leak resources in error handling paths - Fix unsigned comparison which can never be negative - Provide missing NULL terminating entries in tables - Fix misnaming issues" * tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits) leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks leds: sgm3140: Add richtek,rt5033-led compatible dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks" dt-bindings: leds: Drop unneeded quotes leds: Fix config reference for AW200xx driver leds: leds-mt6323: Add support for WLEDs and MT6332 leds: leds-mt6323: Add support for MT6331 leds leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro leds: leds-mt6323: Drop MT6323_ prefix from macros and defines leds: leds-mt6323: Specify registers and specs in platform data dt-bindings: leds: leds-mt6323: Document mt6332 compatible dt-bindings: leds: leds-mt6323: Document mt6331 compatible leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches leds: simatic-ipc-leds-gpio: Split up into multiple drivers leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative leds: cht-wcove: Remove unneeded semicolon leds: cht-wcove: Fix an unsigned comparison which can never be negative ...
2023-07-02Merge tag 'i2c-for-6.5-rc1' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - I2C has now a co-maintainer taking care of the host drivers. Welcome Andi Shyti and have fun! - platform remove callback converted to return void in drivers - simplify drivers by using devm_clk_get_enabled() - introduce i2c_get_match_data() to avoid more boilerplate code (especially since the core stopped delivering an i2c_device_id) - and the usual bunch of driver updates * tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: uniphier: Use devm_clk_get_enabled() i2c: uniphier-f: Use devm_clk_get_enabled() i2c: owl: Use devm_clk_get_enabled() i2c: lpc2k: Use devm_clk_get_enabled() i2c: hix5hd2: Use devm_clk_get_enabled() i2c: sun6i-p2wi: Use devm_clk_get_enabled() i2c: pasemi-platform: Use devm_clk_get_enabled() i2c: mt7621: Use devm_clk_get_enabled() i2c: xiic: Use devm_clk_get_enabled() i2c: davinci: Use platform table macro over module_alias i2c: ocores: use devm_ managed clks i2c: nomadik: Use dev_err_probe() whenever possible i2c: nomadik: Use devm_clk_get_enabled() i2c: nomadik: Remove unnecessary goto label usb: typec: ucsi: Mark dGPUs as DEVICE scope i2c: wmt: Use devm_platform_get_and_ioremap_resource() i2c: versatile: Use devm_platform_get_and_ioremap_resource() i2c: hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver. i2c: mpc: Use of_property_read_reg() to parse "reg" i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP ...
2023-06-29Merge tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2-12/+1
Pull ARM SoC updates from Arnd Bergmann: "These are mostly minor cleanups and bugfixes that address harmless problems. The largest branch is a conversion of the omap platform to use GPIO descriptors throughout the tree, for any devices that are not fully converted to devicetree. The Samsung Exynos platform gains back support for the Exynos4212 chip that was previously unused and removed but is now used for the Samsung Galaxy Tab3" * tag 'soc-arm-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits) ARM: omap2: Fix copy/paste bug MAINTAINERS: Replace my email address Input: ads7846 - fix pointer cast warning Input: ads7846 - Fix usage of match data ARM: omap2: Fix checkpatch issues arm: omap1: replace printk() with pr_err macro ARM: omap: Fix checkpatch issues ARM: s3c: Switch i2c drivers back to use .probe() ARM: versatile: mark mmc_status() static ARM: spear: include "pl080.h" for pl080_get_signal() prototype ARM: sa1100: address missing prototype warnings ARM: pxa: fix missing-prototypes warnings ARM: orion5x: fix d2net gpio initialization ARM: omap2: fix missing tick_broadcast() prototype ARM: omap1: add missing include ARM: lpc32xx: add missing include ARM: imx: add missing include ARM: highbank: add missing include ARM: ep93xx: fix missing-prototype warnings ARM: davinci: fix davinci_cpufreq_init() declaration ...
2023-06-29Merge tag 'gpio-updates-for-v6.5' of ↵Linus Torvalds3-17/+39
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "We have two new drivers, some improvements to the core code, lots of different updates to existing GPIO drivers and some dt-bindings on top. There's nothing controversial in here and almost everything has been in next for more than a week (95% a lot longer than this). The only thing that has spent less time in next is a new driver so no risk of regressions. The single merge pulls in changes that remove all usage of global GPIO numbers from arch/arm/mach-omap. Core GPIO library: - remove unused symbols - don't spam the kernel log with messages about hogs - remove old sysfs API cruft - improve handling of GPIO masks New drivers: - add a driver for the BlueField-3 GPIO controller - add GPIO support for the TPS65219 PMIC Driver improvements: - extend the gpio-aggregator driver to support ramp-up/ramp-down delay - remove unnecessary CONFIG_OF guards from gpio-aggregator - readability improvements in gpio-tangier - switch i2c drivers back to using probe() now that it's been converted in the i2c subsystem to not taking the id parameter - remove unused inclusions of of_gpio.h in several drivers - make pm ops static in gpio-davinci and fix a comment - use more devres in drivers to shrink and simplify the code - add missing include in gpio-sa1100 - add HAS_IOPORT KConfig dependency where needed - add permissions checks before accessing pins in gpio-tegra186 - convert the gpio-zynq driver to using immutable irqchips - preserve output settings set by the bootloader in gpio-mpc8xxx Selftests: - tweak the variable naming in script tests Device tree updates: - convert gpio-mmio and gpio-stmpe to YAML - add parsing of GPIO hogs to gpio-vf610 - add bindings for the Cirrus EP93xx GPIO controller - add gpio-line-names property to the gpio-pca9570 bindings - extend the binding for x-powers,axp209 with another block" * tag 'gpio-updates-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (58 commits) of: unittest: drop assertions for GPIO hog messages gpiolib: Drop unused domain_ops memeber of GPIO IRQ chip gpio: synq: remove unused zynq_gpio_irq_reqres/zynq_gpio_irq_relres dt-bindings: gpio: gpio-vf610: Add parsing of hogs gpio: lpc18xx: Remove unused of_gpio.h inclusion gpio: xra1403: Remove unused of_gpio.h inclusion gpio: mpc8xxx: Remove unused of_gpio.h inclusion dt-bindings: gpio: Add Cirrus EP93xx gpio: mpc8xxx: latch GPIOs state on module load when configured as output selftests: gpio: gpio-sim: Use same variable name for sysfs pathname gpio: mlxbf3: Add gpio driver support gpio: delay: Remove duplicative functionality gpio: aggregator: Set up a parser of delay line parameters gpio: aggregator: Support delay for setting up individual GPIOs gpio: aggregator: Remove CONFIG_OF and of_match_ptr() protections dt-bindings: gpio: pca9570: add gpio-line-names property gpiolib: remove unused gpio_cansleep() gpio: tps65219: add GPIO support for TPS65219 PMIC gpio: zynq: fix zynqmp_gpio not an immutable chip warning gpio: davinci: make davinci_gpio_dev_pm_ops static ...
2023-06-28Merge tag 'mm-stable-2023-06-24-19-15' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull mm updates from Andrew Morton: - Yosry Ahmed brought back some cgroup v1 stats in OOM logs - Yosry has also eliminated cgroup's atomic rstat flushing - Nhat Pham adds the new cachestat() syscall. It provides userspace with the ability to query pagecache status - a similar concept to mincore() but more powerful and with improved usability - Mel Gorman provides more optimizations for compaction, reducing the prevalence of page rescanning - Lorenzo Stoakes has done some maintanance work on the get_user_pages() interface - Liam Howlett continues with cleanups and maintenance work to the maple tree code. Peng Zhang also does some work on maple tree - Johannes Weiner has done some cleanup work on the compaction code - David Hildenbrand has contributed additional selftests for get_user_pages() - Thomas Gleixner has contributed some maintenance and optimization work for the vmalloc code - Baolin Wang has provided some compaction cleanups, - SeongJae Park continues maintenance work on the DAMON code - Huang Ying has done some maintenance on the swap code's usage of device refcounting - Christoph Hellwig has some cleanups for the filemap/directio code - Ryan Roberts provides two patch series which yield some rationalization of the kernel's access to pte entries - use the provided APIs rather than open-coding accesses - Lorenzo Stoakes has some fixes to the interaction between pagecache and directio access to file mappings - John Hubbard has a series of fixes to the MM selftesting code - ZhangPeng continues the folio conversion campaign - Hugh Dickins has been working on the pagetable handling code, mainly with a view to reducing the load on the mmap_lock - Catalin Marinas has reduced the arm64 kmalloc() minimum alignment from 128 to 8 - Domenico Cerasuolo has improved the zswap reclaim mechanism by reorganizing the LRU management - Matthew Wilcox provides some fixups to make gfs2 work better with the buffer_head code - Vishal Moola also has done some folio conversion work - Matthew Wilcox has removed the remnants of the pagevec code - their functionality is migrated over to struct folio_batch * tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits) mm/hugetlb: remove hugetlb_set_page_subpool() mm: nommu: correct the range of mmap_sem_read_lock in task_mem() hugetlb: revert use of page_cache_next_miss() Revert "page cache: fix page_cache_next/prev_miss off by one" mm/vmscan: fix root proactive reclaim unthrottling unbalanced node mm: memcg: rename and document global_reclaim() mm: kill [add|del]_page_to_lru_list() mm: compaction: convert to use a folio in isolate_migratepages_block() mm: zswap: fix double invalidate with exclusive loads mm: remove unnecessary pagevec includes mm: remove references to pagevec mm: rename invalidate_mapping_pagevec to mapping_try_invalidate mm: remove struct pagevec net: convert sunrpc from pagevec to folio_batch i915: convert i915_gpu_error to use a folio_batch pagevec: rename fbatch_count() mm: remove check_move_unevictable_pages() drm: convert drm_gem_put_pages() to use a folio_batch i915: convert shmem_sg_free_table() to use a folio_batch scatterlist: add sg_set_folio() ...
2023-06-23usb: host: xhci-plat: Set XHCI_STATE_REMOVING before resuming XHCI HCWesley Cheng1-1/+1
There are situations during the xhci_resume() sequence, which allows for re-initializing of the XHCI HC. However, in case the HCD is being removed, these operations may not be needed. Set the removal state before issuing the runtime PM get on the XHCI device, so that the XHCI resume routine will know when to bypass the re-init logic. Signed-off-by: Wesley Cheng <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-23usb: host: xhci: Do not re-initialize the XHCI HC if being removedWesley Cheng1-1/+2
During XHCI resume, if there was a host controller error detected the routine will attempt to re-initialize the XHCI HC, so that it can return back to an operational state. If the XHCI host controller is being removed, this sequence would be already handled within the XHCI halt path, leading to a duplicate set of reg ops/calls. In addition, since the XHCI bus is being removed, the overhead added in restarting the HCD is unnecessary. Check for the XHC state before setting the reinit_xhc parameter, which is responsible for triggering the restart. Signed-off-by: Wesley Cheng <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-23usb: typec: nb7vpq904m: fix CONFIG_DRM dependencyNeil Armstrong1-0/+2
With the following config set: CONFIG_DRM=m CONFIG_DRM_PANEL=y CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y CONFIG_TYPEC_MUX_NB7VPQ904M=y vmlinux fails on the following symbols: ld.lld: error: undefined symbol: devm_drm_bridge_add ld.lld: error: undefined symbol: devm_drm_of_get_bridge Add dependendy on DRM || DRM=no since CONFIG_DRM dependency is optional and guarded by: IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_DRM_PANEL_BRIDGE) in the drive. Also add "select DRM_PANEL_BRIDGE if DRM" to clarify DRM_PANEL_BRIDGE is required if CONFIG_DRM is enabled. Fixes: 88d8f3ac9c67 ("usb: typec: add support for the nb7vpq904m Type-C Linear Redriver") Reported-by: Arnd Bergmann <[email protected]> Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Message-ID: <20230622-topic-sm8x50-upstream-redriver-config-fix-v1-1-005ab6f4d1f5@linaro.org> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-23usbip: usbip_host: Replace strlcpy with strscpyAzeem Shaikh1-3/+1
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since return value of -errno is used to check for truncation instead of sizeof(dest). [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <[email protected]> Reviewed-by: Kees Cook <[email protected]> Acked-by: Shuah Khan <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-23usb: dwc3: gadget: Propagate core init errors to UDC during pullupKrishna Kurapati1-1/+3
In scenarios where pullup relies on resume (get sync) to initialize the controller and set the run stop bit, then core_init is followed by gadget_resume which will eventually set run stop bit. But in cases where the core_init fails, the return value is not sent back to udc appropriately. So according to UDC the controller has started but in reality we never set the run stop bit. On systems like Android, there are uevents sent to HAL depending on whether the configfs_bind / configfs_disconnect were invoked. In the above mentioned scnenario, if the core init fails, the run stop won't be set and the cable plug-out won't result in generation of any disconnect event and userspace would never get any uevent regarding cable plug out and we never call pullup(0) again. Furthermore none of the next Plug-In/Plug-Out's would be known to configfs. Return back the appropriate result to UDC to let the userspace/ configfs know that the pullup failed so they can take appropriate action. Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded") Cc: stable <[email protected]> Signed-off-by: Krishna Kurapati <[email protected]> Acked-by: Thinh Nguyen <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-23Merge tag 'usb-serial-6.5-rc1' of ↵Greg Kroah-Hartman25-72/+150
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 6.5-rc1 Here are the USB-serial updates for 6.5-rc1, including: - improved error handling for break signalling - report to user space when a device does not support break signalling Included are also some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-6.5-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add LARA-R6 01B PIDs USB: serial: report unsupported break signalling USB: serial: cp210x: disable break signalling on CP2105 SCI USB: serial: return errors from break handling
2023-06-22USB: serial: option: add LARA-R6 01B PIDsDavide Tronchin1-0/+4
The new LARA-R6 product variant identified by the "01B" string can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial interface and 1 CDC-ECM virtual network interface The first 4 interfaces of all the 3 USB configurations (default, RmNet, CDC-ECM) are the same. In default mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions In RmNet mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions If 4: RMNET interface In CDC-ECM mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parser/alternative functions If 4: CDC-ECM interface Signed-off-by: Davide Tronchin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2023-06-21usb: gadget: legacy: fix error return code in gfs_bindWei Chen1-1/+3
We must return negative error code -ENOMEM if function 'usb_otg_descriptor_alloc()' fails. Signed-off-by: Wei Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-21usb: typec: fsa4480: add support for Audio Accessory ModeNeil Armstrong1-0/+17
The FSA4480 Type-C switch supports switching the Audio R/L, AGND and MIC signals to the USB-C DP/DM and SBU1/2 to support the Audio Accessory Mode. The FSA4480 has an integrated Audio jack detection mechanism to automatically mux the AGND, MIX and Sense to the correct SBU lines to support 3 pole and both 4 pole TRRS pinouts. Signed-off-by: Neil Armstrong <[email protected]> Tested-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-3-15a92565146b@linaro.org Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-21usb: typec: fsa4480: rework mux & switch setup to handle more statesNeil Armstrong1-36/+75
In order to handle the Audio Accessory mode, refactor the mux and switch setup in a single function. The refactor will help add new states and make the process simpler to understand. Signed-off-by: Neil Armstrong <[email protected]> Tested-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-2-15a92565146b@linaro.org Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-21usb: typec: ucsi: call typec_set_mode on non-altmode partner changeNeil Armstrong1-0/+17
Add support for calling typec_set_mode() for the DEBUG, AUDIO accessory modes. Let's also call typec_set_mode() for USB as default and SAFE when partner is disconnected. The USB state is only called when ALT mode is specifically not specified by the partner status flags in order to leave the altmode handlers setup the proper mode to switches, muxes and retimers. Signed-off-by: Neil Armstrong <[email protected]> Tested-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20230614-topic-sm8550-upstream-type-c-audio-v1-1-15a92565146b@linaro.org Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-20USB: gadget: f_hid: make hidg_class a static const structureIvan Orlov1-11/+10
Now that the driver core allows for struct class to be in read-only memory, move the hidg_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Ivan Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-20USB: gadget: f_printer: make usb_gadget_class a static const structureIvan Orlov1-14/+11
Now that the driver core allows for struct class to be in read-only memory, move the usb_gadget_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Ivan Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-20USB: mon: make mon_bin_class a static const structureIvan Orlov1-9/+10
Now that the driver core allows for struct class to be in read-only memory, move the mon_bin_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Ivan Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-20USB: gadget: udc: core: make udc_class a static const structureIvan Orlov1-12/+12
Now that the driver core allows for struct class to be in read-only memory, move the udc_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Ivan Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-20USB: roles: make role_class a static const structureIvan Orlov1-8/+9
Now that the driver core allows for struct class to be in read-only memory, move the role_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at load time. Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Ivan Orlov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-19drivers/usb: use ARCH_DMA_MINALIGN instead of ARCH_KMALLOC_MINALIGNCatalin Marinas1-4/+4
ARCH_DMA_MINALIGN represents the minimum (static) alignment for safe DMA operations while ARCH_KMALLOC_MINALIGN is the minimum kmalloc() objects alignment. Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Tested-by: Isaac J. Manjarres <[email protected]> Cc: Alasdair Kergon <[email protected]> Cc: Ard Biesheuvel <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Herbert Xu <[email protected]> Cc: Jerry Snitselaar <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Jonathan Cameron <[email protected]> Cc: Lars-Peter Clausen <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Mark Brown <[email protected]> Cc: Mike Snitzer <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Robin Murphy <[email protected]> Cc: Saravana Kannan <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-06-19usb: cdns2: Fix spelling mistake in a trace message "Wakupe" -> "Wakeup"Colin Ian King1-1/+1
There is a spelling mistake in a trace message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-19usb: gadget: function: printer: Replace strlcpy with strscpyAzeem Shaikh1-2/+2
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). Direct replacement is safe here since return value of -errno is used to check for truncation instead of PAGE_SIZE. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-19usb: typec: tcpm: add get max power supportFrank Wang1-0/+24
Traverse fixed pdos to calculate the maximum power that the charger can provide, and it can be get by POWER_SUPPLY_PROP_INPUT_POWER_LIMIT property. Signed-off-by: Frank Wang <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-19usb: typec: tcpm: fix cc role at port resetFrank Wang1-1/+2
In the current implementation, the tcpm set CC1/CC2 role to open when it do port reset would cause the VBUS removed by the Type-C partner. This sets CC1/CC2 according to the default state of port to fix it. Signed-off-by: Frank Wang <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-15usb: typec: add support for the nb7vpq904m Type-C Linear RedriverDmitry Baryshkov3-0/+538
Add support for the ON Semiconductor NB7VPQ904M Type-C USB SuperSpeed and DisplayPort ALT Mode Linear Redriver chip found on some devices with a Type-C port. The redriver compensates ultra High-Speeed DisplayPort and USB Super Speed signal integrity losses mainly due to PCB & transmission cables. The redriver doesn't support SuperSpeed lines swapping, but can support Type-C SBU lines swapping. Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Message-ID: <20230601-topic-sm8x50-upstream-redriver-v4-2-91d5820f3a03@linaro.org> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-15Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial ↵Greg Kroah-Hartman4-9/+0
detection" This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15. Heikki reports that this should not be a global flag just to work around one broken driver and should be fixed differently, so revert it. Reported-by: Heikki Krogerus <[email protected]> Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection") Link: https://lore.kernel.org/r/[email protected] Cc: Prashanth K <[email protected]> Cc: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-14usb: typec: ucsi: Mark dGPUs as DEVICE scopeMario Limonciello1-0/+14
power_supply_is_system_supplied() checks whether any power supplies are present that aren't batteries to decide whether the system is running on DC or AC. Downstream drivers use this to make performance decisions. Navi dGPUs include an UCSI function that has been exported since commit 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU"). This UCSI function registers a power supply since commit 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class") but this is not a system power supply. As the power supply for a dGPU is only for powering devices connected to dGPU, create a device property to indicate that the UCSI endpoint is only for the scope of `POWER_SUPPLY_SCOPE_DEVICE`. Link: https://lore.kernel.org/lkml/[email protected]/ Reviewed-by: Evan Quan <[email protected]> Tested-by: Evan Quan <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Acked-by: Andi Shyti <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2023-06-13usb: gadget: udc: core: Prevent soft_connect_store() raceBadhri Jagan Sridharan1-49/+106
usb_udc_connect_control(), soft_connect_store() and usb_gadget_deactivate() can potentially race against each other to invoke usb_gadget_connect()/usb_gadget_disconnect(). To prevent this, guard udc->started, gadget->allow_connect, gadget->deactivate and gadget->connect with connect_lock so that ->pullup() is only invoked when the gadget is bound, started and not deactivated. The routines usb_gadget_connect_locked(), usb_gadget_disconnect_locked(), usb_udc_connect_control_locked(), usb_gadget_udc_start_locked(), usb_gadget_udc_stop_locked() are called with this lock held. An earlier version of this commit was reverted due to the crash reported in https://lore.kernel.org/all/[email protected]/. commit 16737e78d190 ("usb: gadget: udc: core: Offload usb_udc_vbus_handler processing") addresses the crash reported. Cc: [email protected] Fixes: 628ef0d273a6 ("usb: udc: add usb_udc_vbus_handler") Signed-off-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Alan Stern <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-13usb: gadget: udc: core: Offload usb_udc_vbus_handler processingBadhri Jagan Sridharan1-2/+27
usb_udc_vbus_handler() can be invoked from interrupt context by irq handlers of the gadget drivers, however, usb_udc_connect_control() has to run in non-atomic context due to the following: a. Some of the gadget driver implementations expect the ->pullup callback to be invoked in non-atomic context. b. usb_gadget_disconnect() acquires udc_lock which is a mutex. Hence offload invocation of usb_udc_connect_control() to workqueue. UDC should not be pulled up unless gadget driver is bound. The new flag "allow_connect" is now set by gadget_bind_driver() and cleared by gadget_unbind_driver(). This prevents work item to pull up the gadget even if queued when the gadget driver is already unbound. Cc: [email protected] Fixes: 1016fc0c096c ("USB: gadget: Fix obscure lockdep violation for udc_mutex") Signed-off-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Alan Stern <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-13usb: typec: Fix fast_role_swap_current show functionPavan Holla1-1/+1
The current implementation mistakenly performs a & operation on the output of sysfs_emit. This patch performs the & operation before calling sysfs_emit. Fixes: 662a60102c12 ("usb: typec: Separate USB Power Delivery from USB Type-C") Cc: stable <[email protected]> Reported-by: Benson Leung <[email protected]> Signed-off-by: Pavan Holla <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Reviewed-by: Benson Leung <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-06-13usb: chipidea: imx: add missing USB PHY DPDM wakeup settingXu Yang1-1/+1
USB PHY DPDM wakeup bit is enabled by default, when USB wakeup is not required(/sys/.../wakeup is disabled), this bit should be disabled, otherwise we will have unexpected wakeup if do USB device connect/disconnect while system sleep. This bit can be enabled for both host and device mode. Signed-off-by: Li Jun <[email protected]> Signed-off-by: Xu Yang <[email protected]> Acked-by: Peter Chen <[email protected]> Message-ID: <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.