aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2014-09-16Merge tag 'v3.17-rc5' into nextFelipe Balbi26-84/+288
Linux 3.17-rc5 Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: Documentation/devicetree/bindings/usb/mxs-phy.txt drivers/usb/phy/phy-mxs-usb.c
2014-09-12usb: dwc3: Add Qualcomm DWC3 glue layer driverIvan T. Ivanov3-0/+140
DWC3 glue layer is hardware layer around Synopsys DesignWare USB3 core. Its purpose is to supply Synopsys IP with required clocks, voltages and interface it with the rest of the SoC. Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-12usb: gadget: udc-core: add utility for bus resetPeter Chen1-0/+17
The udc driver can notify the udc core that bus reset occurs by calling this utility, the core will notify gadget driver this information and update gadget state accordingly. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-12usb: gadget: Add xilinx usb2 device supportSubbaraya Sundeep Bhatta3-0/+2196
Xilinx USB2 device is a soft IP which supports both full and high speed USB 2.0 data transfers. This patch adds xilinx usb2 device driver support. Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-11Merge tag 'fixes-for-v3.17-rc4' of ↵Greg Kroah-Hartman3-15/+11
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.17-rc4 Some late fixes for dwc3 so we have something more stable on v3.17-final. Most bugs have been there for quite a while and nobody noticed, except for TRB completion when multiple TRBs are started. Patches were tested on AM437x SK and J6 EVM and are passing my tests. Signed-of-by: Felipe Balbi <balbi@ti.com>
2014-09-11xhci: fix oops when xhci resumes from hibernate with hw lpm capable devicesMathias Nyman1-2/+10
Resuming from hibernate (S4) will restart and re-initialize xHC. The device contexts are freed and will be re-allocated later during device reset. Usb core will disable link pm in device resume before device reset, which will try to change the max exit latency, accessing the device contexts before they are re-allocated. There is no need to zero (disable) the max exit latency when disabling hw lpm for a freshly re-initialized xHC. So check that device context exists before doing anything. The max exit latency will be set again after device reset when usb core enables the link pm. Reported-by: Imre Deak <imre.deak@intel.com> Tested-by: Imre Deak <imre.deak@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-11usb: xhci: Fix OOPS in xhci error handling codeAl Cooper1-0/+1
The xhci driver will OOPS on resume from S2/S3 if dma_alloc_coherent() is out of memory. This is a result of two things: 1. xhci_mem_cleanup() in xhci-mem.c free's xhci->lpm_command if it's not NULL, but doesn't set it to NULL after the free. 2. xhci_mem_cleanup() is called twice on resume, once for normal restart and once from xhci_mem_init() if dma_alloc_coherent() fails, resulting in a free of xhci->lpm_command that has already been freed. The fix is to set xhci->lpm_command to NULL after freeing it. Signed-off-by: Al Cooper <alcooperx@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-11xhci: Fix null pointer dereference if xhci initialization failsMathias Nyman1-1/+1
If xhci initialization fails before the roothub bandwidth domains (xhci->rh_bw[i]) are allocated it will oops when trying to access rh_bw members in xhci_mem_cleanup(). Reported-by: Manuel Reimer <manuel.reimer@gmx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-11storage: Add single-LUN quirk for Jaz USB AdapterMark1-0/+6
The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/ SCM chip set. However its firmware restricts it to only work with Jaz drives. On connecting the cable a message like this appears four times in the log: reset full speed USB device number 4 using uhci_hcd That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-11uas: Add missing le16_to_cpu calls to asm1051 / asm1053 usb-id checkHans de Goede1-2/+2
Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-11usb: f_fs: replace BUG in dead-code with less serious WARN_ONMichal Nazarewicz1-1/+2
Even though the BUG() in __ffs_event_add is a dead-code, it is still better to warn rather then crash the system if that code ever gets executed. Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-10usb: chipidea: msm: Initialize PHY on reset eventIvan T. Ivanov1-0/+1
Initialize USB PHY after every Link controller reset Cc: 3.16+ <stable@vger.kernel.org> Cc: Tim Bird <tbird20d@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-10usb: chipidea: msm: Use USB PHY API to control PHY stateIvan T. Ivanov1-5/+1
PHY drivers keep track of the current state of the hardware, so don't change PHY settings under it. Cc: 3.16+ <stable@vger.kernel.org> Cc: Tim Bird <tbird20d@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-10usb: hub: take hub->hdev reference when processing from eventlistJoe Lawrence1-1/+3
During surprise device hotplug removal tests, it was observed that hub_events may try to call usb_lock_device on a device that has already been freed. Protect the usb_device by taking out a reference (under the hub_event_lock) when hub_events pulls it off the list, returning the reference after hub_events is finished using it. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Suggested-by: David Bulkow <david.bulkow@stratus.com> for using kref Suggested-by: Alan Stern <stern@rowland.harvard.edu> for placement Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-10uas: Disable uas on ASM1051 devicesHans de Goede1-4/+23
There are a large numbers of issues with ASM1051 devices in uas mode: 1) They do not support REPORT SUPPORTED OPERATION CODES 2) They use out of spec 8 byte status iu-s when they have no sense data, switching to normal 16 byte status iu-s when they do have sense data. 3) They hang / crash when combined with some disks, e.g. a Crucial M500 ssd. 4) They hang / crash when stressed (through e.g. sg_reset --bus) with disks with which then normally do work (once 1 & 2 are worked around). Where as in BOT mode they appear to work fine, so the best way forward with these devices is to just blacklist them for uas usage. Unfortunately this is easier said then done. as older versions of the ASM1053 (which works fine) use the same usb-id as the ASM1051. When connected over USB-3 the 2 can be told apart by the number of streams they support. So this patch adds some less then pretty code to disable uas for the ASM1051. When connected over USB-2, simply disable uas alltogether for devices with the shared usb-id. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: avoid disabling ep0Robert Baldyga1-1/+1
Endpoint 0 should not be disabled, so we start loop counter from number 1. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: delay enabling irq once hardware is configured properlyMarek Szyprowski1-7/+11
This patch fixes kernel panic/interrupt storm/etc issues if bootloader left s3c-hsotg module in enabled state. Now interrupt handler is enabled only after proper configuration of hardware registers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: do not call disconnect method in pullupMarek Szyprowski1-1/+0
This leads to potential spinlock recursion in composite framework, other udc drivers also don't call it directly from pullup method. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: break infinite loop in endpoint disable codeMarek Szyprowski1-0/+1
This patch fixes possible freeze caused by infinite loop in interrupt context. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: fix phy initialization sequenceKamil Debski1-15/+12
In the Generic PHY Framework a NULL phy is considered to be a valid phy thus the "if (hsotg->phy)" check does not give us the information whether the Generic PHY Framework is used. In addition to the above this patch also removes phy_init from probe and phy_exit from remove. This is not necessary when init/exit is done in the s3c_hsotg_phy_enable/disable functions. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: fix phy disable sequenceKamil Debski1-3/+0
When the driver is removed s3c_hsotg_phy_disable is called three times instead of once. This results in decreasing of the phy reference counter below zero and thus consecutive inserts of the module fails. This patch removes calls to s3c_hsotg_phy_disable from s3c_hsotg_remove and s3c_hsotg_udc_stop. s3c_hsotg_udc_stop is called from udc-core.c only after usb_gadget_disconnect, which in turn calls s3c_hsotg_pullup, which already calls s3c_hsotg_phy_disable. s3c_hsotg_remove must be called only after udc_stop, so there is no point in disabling phy once again there. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: gadget: f_fs: add ioctl returning ep descriptorRobert Baldyga1-0/+23
This patch introduces ioctl named FUNCTIONFS_ENDPOINT_DESC, which returns endpoint descriptor to userspace. It works only if function is active. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: dbgp: add reset API at usb_gadget_driverPeter Chen1-0/+1
Add reset API at usb_gadget_driver, it calls disconnect handler currently, but may do different things in future. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: gadgetfs: add reset API at usb_gadget_driverPeter Chen1-0/+1
Add reset API at usb_gadget_driver, it calls disconnect handler currently, but may do different things in future. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: configfs: add reset API at usb_gadget_driverPeter Chen1-0/+1
Add reset API at usb_gadget_driver, it calls disconnect handler currently, but may do different things in future. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: composite: add reset API at usb_gadget_driverPeter Chen1-0/+1
Add reset API at usb_gadget_driver, it calls disconnect handler currently, but may do different things in future. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: f_fs: signedness bug in __ffs_func_bind_do_descs()Dan Carpenter1-1/+2
We need "idx" to be signed for the error handling to work. Fixes: 6d5c1c77bbf9 ('usb: gadget: f_fs: fix the redundant ep files problem') Acked-by: Michal Nazarewicz <mina86@mina86.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: f_uvc: use usb_gstrings_attachAndrzej Pietrasiewicz1-17/+11
Attach strings to gadget with usb_strings_attach. It is required for correct instantiation of functions more than once: instead of modifying the local uvc_en_us_strings a function instance specific copy is created with usb_gstrings_attach. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: f_uvc: remove compatibility layerAndrzej Pietrasiewicz2-177/+0
There are no users of the old interface left. Remove it. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: webcam: convert webcam to new interface of f_uvcAndrzej Pietrasiewicz3-16/+40
Use the new function interface of f_uvc. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: f_uvc: convert f_uvc to new function interfaceAndrzej Pietrasiewicz5-30/+219
Use the new function registration interface. It is required in order to integrate configfs support. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> [Updated copyright years] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: uvc: separately compile some components of f_uvcAndrzej Pietrasiewicz11-36/+117
Compile uvc_queue, uvc_v4l2, uvc_video separately so that later they can be all combined in a separately compiled f_uvc. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> [Make uvc_v4l2_ioctl_ops non-static] [Rename __UVC__V4L2__H__ and __UVC__VIDEO__H__] [Update MAINTAINERS] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: uvc: rename functions to avoid conflicts with host uvcAndrzej Pietrasiewicz4-55/+56
Prepare for separate compilation of uvc function's components. Some symbols will have to be exported, so rename to avoid conflicts with functions of the same name in host uvc. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> [Rename uvc_video_pump and uvc_queue_head as well] [Rename forgotten uvc_queue_cancel instance in a comment] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-09usb: gadget: zero: Fix warning generated by kbuildAmit Virdi1-2/+2
The kbuild test bot generated the warning: drivers/usb/gadget/function/f_sourcesink.c:1498: warning: comparison is always false due to limited range of data type This patch fixes it. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Amit Virdi <amit.virdi@st.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-08USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker deviceTaylor Braun-Jones2-0/+8
Signed-off-by: Taylor Braun-Jones <taylor.braun-jones@ge.com> Cc: Johan Hovold <johan@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08usb: host: xhci: fix compliance mode workaroundFelipe Balbi1-3/+5
Commit 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) implemented a workaround for a known issue with Texas Instruments' USB 3.0 redriver IC but it left a condition where any xHCI host would be taken out of reset if port was placed in compliance mode and there was no device connected to the port. That condition would trigger a fake connection to a non-existent device so that usbcore would trigger a warm reset of the port, thus taking the link out of reset. This has the side-effect of preventing any xHCI host connected to a Linux machine from starting and running the USB 3.0 Electrical Compliance Suite because the port will mysteriously taken out of compliance mode and, thus, xHCI won't step through the necessary compliance patterns for link validation. This patch fixes the issue by just adding a missing check for XHCI_COMP_MODE_QUIRK inside xhci_hub_report_usb3_link_state() when PORT_CAS isn't set. This patch should be backported to all kernels containing commit 71c731a. Fixes: 71c731a (usb: host: xhci: Fix Compliance Mode on SN65LVP3502CP Hardware) Cc: Alexis R. Cortes <alexis.cortes@ti.com> Cc: <stable@vger.kernel.org> # v3.2+ Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-08Merge tag 'v3.17-rc4' into nextFelipe Balbi50-127/+5831
Merge Linux 3.17-rc4 here so we have all the latest fixes on next too. This also cleans up a few conflicts when applying patches. Signed-off-by: Felipe Balbi <balbi@ti.com> Conflicts: drivers/usb/gadget/Makefile drivers/usb/gadget/function/Makefile drivers/usb/gadget/legacy/Makefile drivers/usb/phy/phy-samsung-usb.h
2014-09-08usb: gadget: uvc: move module parameters from f_uvcAndrzej Pietrasiewicz3-21/+38
When configfs support is integrated the future uvc function module must not take any parameters. Move parameters to webcam. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Tested-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-08usb: gadget: f_uvc: Move to video_ioctl2Laurent Pinchart2-141/+159
Simplify ioctl handling by using video_ioctl2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-08usb: gadget: f_uvc: Store EP0 control request state during setup stageLaurent Pinchart2-18/+7
To handle class requests received on ep0, the driver needs to access the length and direction of the request after the setup stage. It currently stores them in a v4l2 event during the setup stage, and then copies them from the event structure to the driver internal state structure when the event is dequeued. This two-steps approach isn't necessary. Simplify the driver by storing the needed information in the driver internal state structure directly during the setup stage. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05usb: renesas_usbhs: Add device tree support for R-Car H2 and M2Yoshihiro Shimoda1-0/+44
This driver supports other SoCs, but they need boards/Soc depend code. So, this patch adds device tree support for R-Car H2 and M2 initially. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05usb: musb: cppi41: tweak hrtimer valuesDaniel Mack1-2/+2
Intensive tests with USB audio devices connected to a musb host port have shown reproducible pops and clicks in both the playback and the capture stream. These are related to how the early_tx hrtimer is set up, and it turns out they can be fixed by reducing the timer's slack value from 40 to 25 us. Also, when the callback is ran without taking action, it should be rescheduled 20 us later instead of 50 us. Reported-and-tested-by: Sven Neumann <neumann@teufel.de> Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05usb: dwc3: add ST dwc3 glue layer to manage dwc3 HCPeter Griffin3-0/+377
This patch adds the ST glue logic to manage the DWC3 HC on STiH407 SoC family. It manages the powerdown signal, and configures the internal glue logic and syscfg registers. [ balbi@ti.com : actually switch over to of_platform_depopulate() ] Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05usb: dwc3: add tracepoints to aid debuggingFelipe Balbi9-53/+357
When we're debugging hard-to-reproduce and time-sensitive use cases, printk() poses too much overhead. That's when the kernel's tracing infrastructure comes into play. This patch implements a few initial tracepoints for the dwc3 driver. More traces can be added as necessary in order to ease the task of debugging dwc3. Reviewed-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05usb: dwc3: gadget: cmd argument should always be unsignedFelipe Balbi2-2/+2
No functional changes, just making sure we're dealing with unsigned ints. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05usb: dwc3: debug: add dwc3_gadget_event_type_stringFelipe Balbi1-0/+34
this new helper will return a pretty string for DWC3 Gadget Events. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05usb: dwc3: move all string helper functions to debug.hFelipe Balbi4-145/+165
Those functions are only using within debugging messages, grouping them into debug.h makes sense. While at that, also add missing multiple inclusion guard. Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-05usb: dwc3: fix TRB completion when multiple TRBs are startedFelipe Balbi1-7/+1
After commit 2ec2a8be (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) we created a situation where it was possible to hang a bulk/interrupt endpoint if we had more than one pending request in our queue and they were both started with a single Start Transfer command. The problems triggers because we had not enabled Transfer In Progress event for those endpoints and we were not able to process early giveback of requests completed without LST bit set. Fix the problem by finally enabling Xfer In Progress event for all endpoint types, except control. Fixes: 2ec2a8be (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) Cc: <stable@vger.kernel.org> # v3.14+ Reported-by: Pratyush Anand <pratyush.anand@st.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-09-04Merge tag 'usb-serial-3.17-rc4' of ↵Greg Kroah-Hartman3-2/+14
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.17-rc4 These updates add back some PIDs that were lost in a recent revert and add a couple of new ones. Included is also an update to how the sierra driver binds its interfaces in order to avoid binding CDC interfaces. Signed-off-by: Johan Hovold <johan@kernel.org>
2014-09-03usb: dwc3: omap: fix ordering for runtime pm callsFelipe Balbi1-1/+1
we don't to gate clocks until our children are done with their remove path. Fixes: af310e9 (usb: dwc3: omap: use runtime API's to enable clocks) Cc: <stable@vger.kernel.org> # v3.9+ Signed-off-by: Felipe Balbi <balbi@ti.com>
Powered by cgit, Gruvboxed by Blaster4385.