aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2020-07-21usb: usbtest: reduce stack usage in test_queueBixuan Cui1-1/+9
Fix the warning: [-Werror=-Wframe-larger-than=] drivers/usb/misc/usbtest.c: In function 'test_queue': drivers/usb/misc/usbtest.c:2148:1: warning: the frame size of 1232 bytes is larger than 1024 bytes Reported-by: kbuild test robot <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Bixuan Cui <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21usb: typec: tcpm: Stay in BIST mode till hardreset or unattachedBadhri Jagan Sridharan1-2/+5
Port starts to toggle when transitioning to unattached state. This is incorrect while in BIST mode. 6.4.3.1 BIST Carrier Mode Upon receipt of a BIST Message, with a BIST Carrier Mode BIST Data Object, the UUT Shall send out a continuous string of BMC encoded alternating "1"s and “0”s. The UUT Shall exit the Continuous BIST Mode within tBISTContMode of this Continuous BIST Mode being enabled(see Section 6.6.7.2). 6.4.3.2 BIST Test Data Upon receipt of a BIST Message, with a BIST Test Data BIST Data Object, the UUT Shall return a GoodCRC Message and Shall enter a test mode in which it sends no further Messages except for GoodCRC Messages in response to received Messages. See Section 5.9.2 for the definition of the Test Data Frame. The test Shall be ended by sending Hard Reset Signaling to reset the UUT. Signed-off-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21usb: typec: tcpci: Support BIST test data mode for compliance.Badhri Jagan Sridharan2-0/+10
Quoting from TCPCI spec: "Setting this bit to 1 is intended to be used only when a USB compliance tester is using USB BIST Test Data to test the PHY layer of the TCPC. The TCPM should clear this bit when a disconnect is detected. 0: Normal Operation. Incoming messages enabled by RECEIVE_DETECT passed to TCPM via Alert. 1: BIST Test Mode. Incoming messages enabled by RECEIVE_DETECT result in GoodCRC response but may not be passed to the TCPM via Alert." Signed-off-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21usb: typec: tcpm: Support bist test data mode for complianceBadhri Jagan Sridharan1-0/+11
TCPM supports BIST carried mode. PD compliance tests require BIST Test Data to be supported as well. Introducing set_bist_data callback to signal tcpc driver for configuring the port controller hardware to enable/disable BIST Test Data mode. Signed-off-by: Badhri Jagan Sridharan <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21usb: typec: tcpm: Error handling for tcpm_register_partner_altmodesKyle Tso1-1/+3
typec_partner_register_altmode returns ERR_PTR. Reset the pointer altmode to NULL on failure. Signed-off-by: Kyle Tso <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21usb: typec: Comment correction for typec_partner_register_altmodeKyle Tso1-1/+1
typec_register_altmode returns ERR_PTR on failure. Signed-off-by: Kyle Tso <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21usb: typec: intel_pmc_mux: Avoid connect request on disconnectPrashant Malani1-0/+3
When pmc_usb_mux_set() is invoked when a device is disconnected, a valid scenario is for state->alt == NULL and state->mode == TYPEC_STATE_USB. In such cases, if a pmc_usb_disconnect() has already been issued (from either pmc_usb_set_orientation() when orientation == TYPEC_ORIENTATION_NONE, or pmc_usb_set_role() when role == USB_ROLE_NONE), a pmc_usb_connect() will be issued despite no peripheral being present. This confuses the PMC and leads to all subsequent PMC IPC requests returning errors due to timeout. To prevent this, return early if the port orientation or role is already set to none. Cc: Benson Leung <[email protected]> Cc: Heikki Krogerus <[email protected]> Cc: Rajmohan Mani <[email protected]> Fixes: f3c1c41ebc67 ("usb: typec: intel_pmc_mux: Add support for USB4") Signed-off-by: Prashant Malani <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21usb: core: fix quirks_param_set() writing to a const pointerKars Mulder1-4/+12
The function quirks_param_set() takes as argument a const char* pointer to the new value of the usbcore.quirks parameter. It then casts this pointer to a non-const char* pointer and passes it to the strsep() function, which overwrites the value. Fix this by creating a copy of the value using kstrdup() and letting that copy be written to by strsep(). Fixes: 027bd6cafd9a ("usb: core: Add "quirks" parameter for usbcore") Signed-off-by: Kars Mulder <[email protected]> Link: https://lore.kernel.org/r/5ee2-5f048a00-21-618c5c00@230659773 Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21usb: hcd: Try MSI interrupts on PCI devicesAndy Shevchenko1-4/+10
It appears that some platforms share same IRQ line between several devices, some of which are EHCI and OHCI controllers. This is neither practical nor performance-wise, especially in the case when they are supporting MSI. In order to improve the situation try to allocate MSI and fallback to legacy IRQ if no MSI available. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-21USB: serial: qcserial: add EM7305 QDL product IDErik Ekman1-0/+1
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba laptop, it changed product ID to 0x9062 when entering QDL mode: usb 2-4: new high-speed USB device number 78 using xhci_hcd usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: EM7305 usb 2-4: Manufacturer: Sierra Wireless, Incorporated The upgrade could complete after running # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id qcserial 2-4:1.0: Qualcomm USB modem converter detected usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0 Signed-off-by: Erik Ekman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-07-21USB: serial: iuu_phoenix: fix led-activity helpersJohan Hovold1-6/+8
The set-led command is eight bytes long and starts with a command byte followed by six bytes of RGB data and ends with a byte encoding a frequency (see iuu_led() and iuu_rgbf_fill_buffer()). The led activity helpers had a few long-standing bugs which corrupted the command packets by inserting a second command byte and thereby offsetting the RGB data and dropping the frequency in non-xmas mode. In xmas mode, a related off-by-one error left the frequency field uninitialised. Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver") Reported-by: George Spelvin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-07-20Merge 5.8-rc6 into usb-nextGreg Kroah-Hartman14-33/+79
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-20Merge 5.8-rc6 into tty-nextGreg Kroah-Hartman33-104/+168
We need the serial/tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook2-3/+3
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/[email protected]/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <[email protected]> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <[email protected]> # IB Acked-by: Kalle Valo <[email protected]> # wireless drivers Reviewed-by: Chao Yu <[email protected]> # erofs Signed-off-by: Kees Cook <[email protected]>
2020-07-16Merge tag 'usb-serial-5.8-rc6' of ↵Greg Kroah-Hartman1-3/+5
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.8-rc6 Here's a fix for 5.8 addressing a long-standing bug in iuu_phoenix. * tag 'usb-serial-5.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: iuu_phoenix: fix memory corruption
2020-07-16USB: serial: iuu_phoenix: fix memory corruptionJohan Hovold1-3/+5
The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.") Cc: stable <[email protected]> # 2.6.31 Signed-off-by: Johan Hovold <[email protected]>
2020-07-15usb: misc: sisusbvga: Move static const tables out to different include fileLee Jones3-631/+689
sisusb_init.h is included by multiple source files, but the big data tables contained are only referenced by one of them, leaving the tables 'defined but not used' by the remainder. We have a choice to either place them inside the source file, taking up may lines and potentially overwhelming the source file OR tuck them away neatly inside their own headerfile. The latter was chosen. Fixes the following W=1 kernel build warning(s): In file included from drivers/usb/misc/sisusbvga/sisusb.c:54: drivers/usb/misc/sisusbvga/sisusb_init.h:664:34: warning: ‘SiSUSB_VCLKData’ defined but not used [-Wunused-const-variable=] 664 | static const struct SiS_VCLKData SiSUSB_VCLKData[] = { | ^~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:406:35: warning: ‘SiSUSB_CRT1Table’ defined but not used [-Wunused-const-variable=] 406 | static const struct SiS_CRT1Table SiSUSB_CRT1Table[] = { | ^~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:348:30: warning: ‘SiSUSB_RefIndex’ defined but not used [-Wunused-const-variable=] 348 | static const struct SiS_Ext2 SiSUSB_RefIndex[] = { | ^~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:269:29: warning: ‘SiSUSB_EModeIDTable’ defined but not used [-Wunused-const-variable=] 269 | static const struct SiS_Ext SiSUSB_EModeIDTable[] = { | ^~~~~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:238:36: warning: ‘SiSUSB_StandTable’ defined but not used [-Wunused-const-variable=] 238 | static const struct SiS_StandTable SiSUSB_StandTable[] = { | ^~~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:201:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=] 201 | static const struct SiS_ModeResInfo SiSUSB_ModeResInfo[] = { | ^~~~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:196:28: warning: ‘SiSUSB_SModeIDTable’ defined but not used [-Wunused-const-variable=] 196 | static const struct SiS_St SiSUSB_SModeIDTable[] = { | ^~~~~~~~~~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:183:28: warning: ‘SiS_VGA_DAC’ defined but not used [-Wunused-const-variable=] 183 | static const unsigned char SiS_VGA_DAC[] = { | ^~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:172:28: warning: ‘SiS_EGA_DAC’ defined but not used [-Wunused-const-variable=] 172 | static const unsigned char SiS_EGA_DAC[] = { | ^~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:161:28: warning: ‘SiS_CGA_DAC’ defined but not used [-Wunused-const-variable=] 161 | static const unsigned char SiS_CGA_DAC[] = { | ^~~~~~~~~~~ drivers/usb/misc/sisusbvga/sisusb_init.h:150:28: warning: ‘SiS_MDA_DAC’ defined but not used [-Wunused-const-variable=] 150 | static const unsigned char SiS_MDA_DAC[] = { | ^~~~~~~~~~~ Cc: Thomas Winischhofer <[email protected]> Cc: Joe Perches <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: misc: sisusbvga: sisusb_init: Remove genunine unused static const arraysLee Jones1-31/+0
These are not referenced anywhere in the kernel. Fixes the following W=1 kernel build warning(s): drivers/usb/misc/sisusbvga/sisusb_init.h:171:29: warning: ‘ModeIndex_1280x1024’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:170:29: warning: ‘ModeIndex_1280x768’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:169:29: warning: ‘ModeIndex_1280x720’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:168:29: warning: ‘ModeIndex_1152x864’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:167:29: warning: ‘ModeIndex_1024x576’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:166:29: warning: ‘ModeIndex_1024x768’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:165:29: warning: ‘ModeIndex_960x600’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:164:29: warning: ‘ModeIndex_960x540’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:163:29: warning: ‘ModeIndex_856x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:162:29: warning: ‘ModeIndex_848x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:161:29: warning: ‘ModeIndex_800x600’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:160:29: warning: ‘ModeIndex_800x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:159:29: warning: ‘ModeIndex_768x576’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:158:29: warning: ‘ModeIndex_720x576’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:157:29: warning: ‘ModeIndex_720x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:156:29: warning: ‘ModeIndex_640x480’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:155:29: warning: ‘ModeIndex_640x400’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:154:29: warning: ‘ModeIndex_512x384’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:153:29: warning: ‘ModeIndex_400x300’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:152:29: warning: ‘ModeIndex_320x240’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:151:29: warning: ‘ModeIndex_320x200’ defined but not used [-Wunused-const-variable=] drivers/usb/misc/sisusbvga/sisusb_init.h:232:37: warning: ‘SiSUSB_ModeResInfo’ defined but not used [-Wunused-const-variable=] Cc: Thomas Winischhofer <[email protected]> Cc: Joe Perches <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: c67x00: c67x00-hcd: Demote obvious misuse of kerneldoc to standard ↵Lee Jones1-3/+3
comment blocks No attempt has been made to document any of the functions here. Fixes the following W=1 kernel build warning(s): drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'sie' not described in 'c67x00_hcd_irq' drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'int_status' not described in 'c67x00_hcd_irq' drivers/usb/c67x00/c67x00-hcd.c:237: warning: Function parameter or member 'msg' not described in 'c67x00_hcd_irq' drivers/usb/c67x00/c67x00-hcd.c:267: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_start' drivers/usb/c67x00/c67x00-hcd.c:279: warning: Function parameter or member 'hcd' not described in 'c67x00_hcd_stop' Cc: Peter Korsgaard <[email protected]> Cc: Oliver Neukum <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: class: cdc-wdm: Provide description for usb_cdc_wdm_register()'s ↵Lee Jones1-1/+2
manage_power arg A good attempt was made to document everything else. Fixes the following W=1 kernel build warning(s): drivers/usb/class/cdc-wdm.c:961: warning: Function parameter or member 'manage_power' not described in 'usb_cdc_wdm_register' Cc: Oliver Neukum <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: mtu3: mtu3_trace: Supply missing mtu3_debug.h include fileLee Jones1-0/+1
If the header file containing a function's prototype isn't included by the sourcefile containing the associated function, the build system complains of missing prototypes. Fixes the following W=1 kernel build warning(s): drivers/usb/mtu3/mtu3_trace.c:13:6: warning: no previous prototype for ‘mtu3_dbg_trace’ [-Wmissing-prototypes] 13 | void mtu3_dbg_trace(struct device *dev, const char *fmt, ...) | ^~~~~~~~~~~~~~ Cc: Chunfeng Yun <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: mtu3: mtu3_trace: Function headers are not suitable for kerneldocLee Jones1-1/+1
Kerneldoc headers should only be used to document functions and data structures. Cc: Chunfeng Yun <[email protected]> Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: dwc2: gadget: Avoid pointless read of EP control registerLee Jones1-2/+0
Commit ec1f9d9f01384 ("usb: dwc2: gadget: parity fix in isochronous mode") moved these checks to dwc2_hsotg_change_ep_iso_parity() back in 2015. The assigned value hasn't been read back since. Let's remove the unnecessary H/W read. Fixes the following W=1 warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_hsotg_epint’: drivers/usb/dwc2/gadget.c:2981:6: warning: variable ‘ctrl’ set but not used [-Wunused-but-set-variable] 2981 | u32 ctrl; | ^~~~ Cc: Ben Dooks <[email protected]> Signed-off-by: Lee Jones <[email protected]> Acked-by: Minas Harutyunyan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: dwc2: gadget: Make use of GINTMSK2Lee Jones1-0/+1
The value obtained from GINTSTS2 should be masked with the GINTMSK2 value. Looks like this has been broken since dwc2_gadget_wkup_alert_handler() was added back in 2018. Also fixes the following W=1 warning: drivers/usb/dwc2/gadget.c: In function ‘dwc2_gadget_wkup_alert_handler’: drivers/usb/dwc2/gadget.c:259:6: warning: variable ‘gintmsk2’ set but not used [-Wunused-but-set-variable] 259 | u32 gintmsk2; | ^~~~~~~~ Cc: Ben Dooks <[email protected]> Fixes: 187c5298a1229 ("usb: dwc2: gadget: Add handler for WkupAlert interrupt") Signed-off-by: Lee Jones <[email protected]> Acked-by: Minas Harutyunyan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15USB: musb: Remove unused inline functionYueHaibing1-1/+0
It is never used, so can remove it. Signed-off-by: YueHaibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15USB: sisusbvga: Fix a potential UB casued by left shifting a negative valueChangming Liu1-1/+1
The char buffer buf, receives data directly from user space, so its content might be negative and its elements are left shifted to form an unsigned integer. Since left shifting a negative value is undefined behavior, thus change the char to u8 to elimintate this UB. Signed-off-by: Changming Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15USB: Remove pci-dma-compat wrapper APIs.Suraj Upadhyay1-2/+1
The legacy API wrappers in include/linux/pci-dma-compat.h should go away as it creates unnecessary midlayering for include/linux/dma-mapping.h APIs, instead use dma-mapping.h APIs directly. The patch has been generated with the coccinelle script below and compile-tested. @@@@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@@@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@@@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@@@ - PCI_DMA_NONE + DMA_NONE @@ expression E1, E2, E3; @@ - pci_alloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3; @@ - pci_zalloc_consistent(E1, E2, E3) + dma_alloc_coherent(&E1->dev, E2, E3, GFP_) @@ expression E1, E2, E3, E4; @@ - pci_free_consistent(E1, E2, E3, E4) + dma_free_coherent(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_single(E1, E2, E3, E4) + dma_map_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_single(E1, E2, E3, E4) + dma_unmap_single(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4, E5; @@ - pci_map_page(E1, E2, E3, E4, E5) + dma_map_page(&E1->dev, E2, E3, E4, E5) @@ expression E1, E2, E3, E4; @@ - pci_unmap_page(E1, E2, E3, E4) + dma_unmap_page(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_map_sg(E1, E2, E3, E4) + dma_map_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_unmap_sg(E1, E2, E3, E4) + dma_unmap_sg(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_cpu(E1, E2, E3, E4) + dma_sync_single_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_single_for_device(E1, E2, E3, E4) + dma_sync_single_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_cpu(E1, E2, E3, E4) + dma_sync_sg_for_cpu(&E1->dev, E2, E3, E4) @@ expression E1, E2, E3, E4; @@ - pci_dma_sync_sg_for_device(E1, E2, E3, E4) + dma_sync_sg_for_device(&E1->dev, E2, E3, E4) @@ expression E1, E2; @@ - pci_dma_mapping_error(E1, E2) + dma_mapping_error(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_consistent_dma_mask(E1, E2) + dma_set_coherent_mask(&E1->dev, E2) @@ expression E1, E2; @@ - pci_set_dma_mask(E1, E2) + dma_set_mask(&E1->dev, E2) Signed-off-by: Suraj Upadhyay <[email protected]> Link: https://lore.kernel.org/r/20200714115249.GA8563@blackclown Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: gadget: Replace HTTP links with HTTPS onesAlexander A. Klimov6-6/+6
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: phy: Replace HTTP links with HTTPS onesAlexander A. Klimov2-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: dwc3: Replace HTTP links with HTTPS onesAlexander A. Klimov16-16/+16
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: host: xhci-plat: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15usb: typec: Replace HTTP links with HTTPS onesAlexander A. Klimov2-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-15USB: ohci: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-14USB: serial: sierra: clean up special-interface handlingJohan Hovold1-29/+29
Clean up the handling of special interfaces that either should be ignored or that need a larger number of URBs. Commit 66f092ed3b94 ("USB: serial: sierra: unify quirk handling logic") replaced the previous is_blacklisted() and is_highmemory() helpers with a single is_quirk() helper which made it even harder to understand what the interface lists were used for. Rename the interface-list struct, its members and the interface-lookup helper and restructure the code somewhat in order to make it more self-explanatory. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-07-14USB: serial: cp210x: use in-kernel types in port dataJohan Hovold1-1/+1
The port data is not exported to user space so use the in-kernel u8 type. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-07-14USB: serial: cp210x: drop unnecessary packed attributesJohan Hovold1-3/+3
Drop unnecessary packed attributes from structs without padding. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-07-14USB: serial: cp210x: add support for TIOCGICOUNTJohan Hovold1-0/+1
Enable TIOCGICOUNT to allow reading out the (unused) interrupt counters and error statistics. Note that modem-status events are currently left unimplemented as they appear to be buffered on at least CP2102 and therefore cannot be used to implement TIOCMIWAIT. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-07-14USB: serial: cp210x: add support for line-status eventsJohan Hovold1-3/+186
Add support for line-status events that specifically can be used to detect and report parity errors. Enable the device's event-insertion mode whenever input-parity checking is requested. This will insert line and modem status events into the data stream. Note that modem-status changes appear to be buffered until a character is received (at least on CP2102) and support is therefore left unimplemented. On at least one type of these chips (CP2102), line breaks are not reported as expected either (regardless of whether SERIAL_BREAK_CHAR is set) so do not enable event-mode when !IGNBRK is requested for now. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-07-14USB: serial: cp210x: disable interface on errors in openJohan Hovold1-1/+10
Try to disable the serial interface in the unlikely event that generic open() fails. Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-07-10Merge tag 'fixes-for-v5.8-rc3' of ↵Greg Kroah-Hartman8-30/+38
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.8-rc3 Adding support for recent Intel devices (Tiger Lake and Jasper Lake) on dwc3. We have some endianess fixes in cdns3, a memleak fix in gr_udc and lock API usage fix in the legacy f_uac1 Signed-off-by: Felipe Balbi <[email protected]> * tag 'fixes-for-v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: gadget: function: fix missing spinlock in f_uac1_legacy usb: gadget: udc: atmel: fix uninitialized read in debug printk usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable() usb: dwc2: Fix shutdown callback in platform usb: cdns3: trace: fix some endian issues usb: cdns3: ep0: fix some endian issues usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init() usb: gadget: fix langid kernel-doc warning in usbstring.c usb: dwc3: pci: add support for the Intel Jasper Lake usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
2020-07-10USB: c67x00: fix use after free in c67x00_giveback_urbTom Rix1-1/+1
clang static analysis flags this error c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc] usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); ^~~~~~~~~~~~ Problem happens in this block of code c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); In the call to c67x00_release_urb has this freeing of urbp urbp = urb->hcpriv; urb->hcpriv = NULL; list_del(&urbp->hep_node); kfree(urbp); And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd parameter. Since all is required is the status, pass the status directly as is done in c64x00_urb_dequeue Fixes: e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver") Signed-off-by: Tom Rix <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-10udc: lpc32xx: make symbol 'lpc32xx_usbddata' staticWei Yongjun1-1/+1
The sparse tool complains as follows: drivers/usb/gadget/udc/lpc32xx_udc.c:2989:25: warning: symbol 'lpc32xx_usbddata' was not declared. Should it be static? This variable is not used outside of lpc32xx_udc.c, so this commit marks it static. Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-10usb: gadget: Use fallthrough pseudo-keywordGustavo A. R. Silva16-41/+43
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200707171500.GA13620@embeddedor Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-10usb: host: Use fallthrough pseudo-keywordGustavo A. R. Silva5-7/+7
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200707195023.GA3792@embeddedor Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-10USB: OHCI: Use fallthrough pseudo-keywordGustavo A. R. Silva4-9/+9
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200707195351.GA4061@embeddedor Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-10usb: Use fallthrough pseudo-keywordGustavo A. R. Silva18-36/+36
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200707195607.GA4198@embeddedor Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-10usb: phy: Use fallthrough pseudo-keywordGustavo A. R. Silva4-16/+16
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Link: https://lore.kernel.org/r/20200707200040.GA4525@embeddedor Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-09usbip: Use fallthrough pseudo-keywordGustavo A. R. Silva4-8/+7
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Acked-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/20200707195214.GA3932@embeddedor Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-09USB: storage: replace HTTP links with HTTPS onesAlexander A. Klimov3-3/+3
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-07-09usb: host: xhci-plat: Do not define 'struct acpi_device_id' when !CONFIG_ACPILee Jones1-0/+2
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, struct usb_xhci_acpi_match becomes defined by unused. Fixes the following W=1 kernel build warning(s): drivers/usb/host/xhci-plat.c:457:36: warning: ‘usb_xhci_acpi_match’ defined but not used [-Wunused-const-variable=] 457 | static const struct acpi_device_id usb_xhci_acpi_match[] = { | ^~~~~~~~~~~~~~~~~~~ Cc: Mathias Nyman <[email protected]> Cc: Andrzej Siewior <[email protected]> Signed-off-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.