aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb
AgeCommit message (Collapse)AuthorFilesLines
2021-12-21xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.Mathias Nyman1-1/+4
The Fresco Logic FL1100 controller needs the TRUST_TX_LENGTH quirk like other Fresco controllers, but should not have the BROKEN_MSI quirks set. BROKEN_MSI quirk causes issues in detecting usb drives connected to docks with this FL1100 controller. The BROKEN_MSI flag was apparently accidentally set together with the TRUST_TX_LENGTH quirk Original patch went to stable so this should go there as well. Fixes: ea0f69d82119 ("xhci: Enable trust tx length quirk for Fresco FL11 USB controller") Cc: [email protected] cc: Nikolay Martynov <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21tty: tty_io: Switch to vmalloc() fallback in case of TTY_NO_WRITE_SPLITAndy Shevchenko1-4/+0
When TTY_NO_WRITE_SPLIT is set and 64 KiB chunks are used, allow vmalloc() fallback. Supply __GFP_RETRY_MAYFAIL to make kmalloc() preferable over vmalloc() since we may want a better performance. Note, both current users copy data to another buffer anyway, so the type of our allocation doesn't affect their expectations. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: mtu3: set interval of FS intr and isoc endpointChunfeng Yun1-0/+7
Add support to set interval also for FS intr and isoc endpoint. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: [email protected] Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: mtu3: fix list_head check warningChunfeng Yun1-0/+1
This is caused by uninitialization of list_head. BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4 Call trace: dump_backtrace+0x0/0x298 show_stack+0x24/0x34 dump_stack+0x130/0x1a8 print_address_description+0x88/0x56c __kasan_report+0x1b8/0x2a0 kasan_report+0x14/0x20 __asan_load8+0x9c/0xa0 __list_del_entry_valid+0x34/0xe4 mtu3_req_complete+0x4c/0x300 [mtu3] mtu3_gadget_stop+0x168/0x448 [mtu3] usb_gadget_unregister_driver+0x204/0x3a0 unregister_gadget_item+0x44/0xa4 Fixes: 83374e035b62 ("usb: mtu3: add tracepoints to help debug") Cc: [email protected] Reported-by: Yuwen Ng <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: mtu3: add memory barrier before set GPD's HWOChunfeng Yun1-1/+6
There is a seldom issue that the controller access invalid address and trigger devapc or emimpu violation. That is due to memory access is out of order and cause gpd data is not correct. Add mb() to prohibit compiler or cpu from reordering to make sure GPD is fully written before setting its HWO. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Cc: [email protected] Reported-by: Eddie Hung <[email protected]> Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: mtu3: fix interval value for intr and isocChunfeng Yun1-2/+2
Use the Interval value from isoc/intr endpoint descriptor, no need minus one. The original code doesn't cause transfer error for normal cases, but it may have side effect with respond time of ERDY or tPingTimeout. Signed-off-by: Chunfeng Yun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.Vincent Pelletier1-3/+6
ffs_data_clear is indirectly called from both ffs_fs_kill_sb and ffs_ep0_release, so it ends up being called twice when userland closes ep0 and then unmounts f_fs. If userland provided an eventfd along with function's USB descriptors, it ends up calling eventfd_ctx_put as many times, causing a refcount underflow. NULL-ify ffs_eventfd to prevent these extraneous eventfd_ctx_put calls. Also, set epfiles to NULL right after de-allocating it, for readability. For completeness, ffs_data_clear actually ends up being called thrice, the last call being before the whole ffs structure gets freed, so when this specific sequence happens there is a second underflow happening (but not being reported): /sys/kernel/debug/tracing# modprobe usb_f_fs /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter /sys/kernel/debug/tracing# echo function > current_tracer /sys/kernel/debug/tracing# echo 1 > tracing_on (setup gadget, run and kill function userland process, teardown gadget) /sys/kernel/debug/tracing# echo 0 > tracing_on /sys/kernel/debug/tracing# cat trace smartcard-openp-436 [000] ..... 1946.208786: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] ..... 1946.279147: ffs_data_clear <-ffs_data_closed smartcard-openp-431 [000] .n... 1946.905512: ffs_data_clear <-ffs_data_put Warning output corresponding to above trace: [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c [ 1946.293094] refcount_t: underflow; use-after-free. [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E) [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G C OE 5.15.0-1-rpi #1 Debian 5.15.3-1 [ 1946.417950] Hardware name: BCM2835 [ 1946.425442] Backtrace: [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24) [ 1946.448226] r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30) [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154) [ 1946.482067] r5:c04a948c r4:c0a71dc8 [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4) [ 1946.506758] r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04 [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c) [ 1946.535309] r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0 [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74) [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs]) [ 1946.582664] r5:c3b84c00 r4:c2695b00 [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs]) [ 1946.609608] r5:bf54d014 r4:c2695b00 [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs]) [ 1946.636217] r7:c0dfcb84 r6:c3a12260 r5:bf54d014 r4:c229f000 [ 1946.646273] [<bf547d74>] (ffs_fs_kill_sb [usb_f_fs]) from [<c0326d50>] (deactivate_locked_super+0x54/0x9c) [ 1946.664893] r5:bf54d014 r4:c229f000 [ 1946.672921] [<c0326cfc>] (deactivate_locked_super) from [<c0326df8>] (deactivate_super+0x60/0x64) [ 1946.690722] r5:c2a09000 r4:c229f000 [ 1946.698706] [<c0326d98>] (deactivate_super) from [<c0349a28>] (cleanup_mnt+0xe4/0x14c) [ 1946.715553] r5:c2a09000 r4:00000000 [ 1946.723528] [<c0349944>] (cleanup_mnt) from [<c0349b08>] (__cleanup_mnt+0x1c/0x20) [ 1946.739922] r7:c0dfcb84 r6:c3a12260 r5:c3a126fc r4:00000000 [ 1946.750088] [<c0349aec>] (__cleanup_mnt) from [<c0143d10>] (task_work_run+0x84/0xb8) [ 1946.766602] [<c0143c8c>] (task_work_run) from [<c010bdc8>] (do_work_pending+0x470/0x56c) [ 1946.783540] r7:5ac3c35a r6:c0d0424c r5:c200bfb0 r4:c200a000 [ 1946.793614] [<c010b958>] (do_work_pending) from [<c01000c0>] (slow_work_pending+0xc/0x20) [ 1946.810553] Exception stack(0xc200bfb0 to 0xc200bff8) [ 1946.820129] bfa0: 00000000 00000000 000000aa b5e21430 [ 1946.837104] bfc0: bef867a0 00000001 bef86840 00000034 bef86838 bef86790 bef86794 bef867a0 [ 1946.854125] bfe0: 00000000 bef86798 b67b7a1c b6d626a4 60000010 b5a23760 [ 1946.865335] r10:00000000 r9:c200a000 r8:c0100224 r7:00000034 r6:bef86840 r5:00000001 [ 1946.881914] r4:bef867a0 [ 1946.888793] ---[ end trace 7387f2a9725b28d0 ]--- Fixes: 5e33f6fdf735 ("usb: gadget: ffs: add eventfd notification about ffs events") Cc: stable <[email protected]> Signed-off-by: Vincent Pelletier <[email protected]> Link: https://lore.kernel.org/r/f79eeea29f3f98de6782a064ec0f7351ad2f598f.1639793920.git.plr.vincent@gmail.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: musb: dsps: Use platform_get_irq_byname() to get the interruptLad Prabhakar1-6/+9
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by: Lad Prabhakar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: cdns3: Use platform_get_irq_byname() to get the interruptLad Prabhakar1-6/+8
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Reviewed-by: Roger Quadros <[email protected]> Signed-off-by: Lad Prabhakar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: isp1760: Use platform_get_irq() to get the interruptLad Prabhakar1-9/+7
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Also use irq_get_trigger_type to get the IRQ trigger flags. Reviewed-by: Rui Miguel Silva <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Lad Prabhakar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: dwc3: Drop unneeded calls to platform_get_resource_byname()Lad Prabhakar1-19/+26
Drop unneeded calls to platform_get_resource_byname() from dwc3_host_init(). dwc3_host_init() already calls dwc3_host_get_irq() which gets the irq number, just use this to get the IRQ resource data and fill the xhci_resources[1] Reviewed-by: Roger Quadros <[email protected]> Signed-off-by: Lad Prabhakar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: renesas_usbhs: Use platform_get_irq() to get the interruptLad Prabhakar3-23/+6
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Drop irqflags member from struct usbhs_priv as this driver is used by two non DT users sh7757lcr and ecovec24 which do not pass IORESOURCE_IRQ_SHAREABLE as part of their pdata. Along this drop the IRQF_SHARED flag handling in the code. Signed-off-by: Lad Prabhakar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21usb: host: fotg210: Use platform_get_irq() to get the interruptLad Prabhakar1-8/+3
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Lad Prabhakar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21xhci: use max() to make code cleanerChangcheng Deng1-4/+2
Use max() in order to make code cleaner. Reported-by: Zeal Robot <[email protected]> Signed-off-by: Changcheng Deng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-21Revert "usb: host: ehci-sh: propagate errors from platform_get_irq()"Greg Kroah-Hartman1-2/+2
This reverts commit 1aebf115afd730d1e0f773b8273b04b8681e1128 as the prerequsite commit for it is not in the tree. Cc: Alan Stern <[email protected]> Reported-by: Sergey Shtylyov <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-20Merge 5.16-rc6 into usb-nextGreg Kroah-Hartman15-35/+87
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: misc: ehset: Rework test mode entryRazvan Heghedus1-0/+58
The USB2.0 spec chapter 11.24.2.13 says that the USB port which is going under test needs to be put in suspend state before sending the test command. Many hubs, don't enforce this precondition and they work fine without this step. We should follow the specification and put the USB port in suspend before sending the test command. Also there are some "special" hubs, which requires to disable the USB port power instead of putting it in suspend. I found out only three hubs which requires this step, but if more are found, they can be added to the list. Since this changes the default implementation, it raises the posibility of finding other broken hubs which are not compliant with the spec and the test command might not work is the port is suspended. If such hubs are found, a similar workaround like the disable part can be implemented to skip putting the port in suspend. Signed-off-by: Razvan Heghedus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: core: Export usb_device_match_idRazvan Heghedus1-0/+1
Export usb_device_match_id so that it can be used for easily matching an usb_device with a table of IDs. Signed-off-by: Razvan Heghedus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: musb: Set the DT node on the child deviceRob Herring6-0/+9
The musb glue drivers just copy the glue resources to the musb child device. Instead, set the musb child device's DT node pointer to the parent device's node so that platform_get_irq_byname() can find the resources in the DT. This removes the need for statically populating the IRQ resources from the DT which has been deprecated for some time. Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: musb: Drop unneeded resource copyingRob Herring3-53/+4
The platform device resources are copied by the driver core, so there is no need for the caller to do it when creating a platform device. Just pass the parent resources to the child device directly. Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: host: ohci-omap: propagate errors from platform_get_irq()Sergey Shtylyov1-1/+1
The driver overrides the error codes returned by platform_get_irq() to -ENXIO for some strange reason. Switch to propagating the error codes upstream. Acked-by: Alan Stern <[email protected]> Signed-off-by: Sergey Shtylyov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: host: ehci-sh: propagate errors from platform_get_irq()Sergey Shtylyov1-2/+2
The driver overrides the error codes and IRQ0 returned by platform_get_irq() to -ENODEV. Switch to propagating the error codes upstream. IRQ0 is no longer returned by platform_get_irq(), so we now can safely ignore it... Acked-by: Alan Stern <[email protected]> Signed-off-by: Sergey Shtylyov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: gadget: udc: pxa25x: propagate errors from platform_get_irq()Sergey Shtylyov1-1/+1
The driver overrides the error codes returned by platform_get_irq() to -ENODEV for some strange reason. Switch to propagating the error codes upstream. Acked-by: Daniel Mack <[email protected]> Signed-off-by: Sergey Shtylyov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: gadget: udc: bcm63xx: propagate errors from platform_get_irq()Sergey Shtylyov1-2/+6
The driver overrides the error codes returned by platform_get_irq() to -ENXIO for some strange reason. Switch to propagating the error codes upstream. Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Sergey Shtylyov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: ftdi-elan: fix memory leak on device disconnectWei Yongjun1-0/+1
'ftdi' is alloced when probe device, but not free on device disconnect, this cause a memory leak as follows: unreferenced object 0xffff88800d584000 (size 8400): comm "kworker/0:2", pid 3809, jiffies 4295453055 (age 13.784s) hex dump (first 32 bytes): 00 40 58 0d 80 88 ff ff 00 40 58 0d 80 88 ff ff .@X......@X..... 00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N.. backtrace: [<000000000d47f947>] kmalloc_order_trace+0x19/0x110 mm/slab_common.c:960 [<000000008548ac68>] ftdi_elan_probe+0x8c/0x880 drivers/usb/misc/ftdi-elan.c:2647 [<000000007f73e422>] usb_probe_interface+0x31b/0x800 drivers/usb/core/driver.c:396 [<00000000fe8d07fc>] really_probe+0x299/0xc30 drivers/base/dd.c:517 [<0000000005da7d32>] __driver_probe_device+0x357/0x500 drivers/base/dd.c:751 [<000000003c2c9579>] driver_probe_device+0x4e/0x140 drivers/base/dd.c:781 Fix it by freeing 'ftdi' after nobody use it. Fixes: a5c66e4b2418 ("USB: ftdi-elan: client driver for ELAN Uxxx adapters") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0Kai-Heng Feng1-1/+4
When a new USB device gets plugged to nested hubs, the affected hub, which connects to usb 2-1.4-port2, doesn't report there's any change, hence the nested hubs go back to runtime suspend like nothing happened: [ 281.032951] usb usb2: usb wakeup-resume [ 281.032959] usb usb2: usb auto-resume [ 281.032974] hub 2-0:1.0: hub_resume [ 281.033011] usb usb2-port1: status 0263 change 0000 [ 281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.049797] usb 2-1: usb wakeup-resume [ 281.069800] usb 2-1: Waited 0ms for CONNECT [ 281.069810] usb 2-1: finish resume [ 281.070026] hub 2-1:1.0: hub_resume [ 281.070250] usb 2-1-port4: status 0203 change 0000 [ 281.070272] usb usb2-port1: resume, status 0 [ 281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 281.089813] usb 2-1.4: usb wakeup-resume [ 281.109792] usb 2-1.4: Waited 0ms for CONNECT [ 281.109801] usb 2-1.4: finish resume [ 281.109991] hub 2-1.4:1.0: hub_resume [ 281.110147] usb 2-1.4-port2: status 0263 change 0000 [ 281.110234] usb 2-1-port4: resume, status 0 [ 281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s [ 281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.110426] hub 2-1.4:1.0: hub_suspend [ 281.110565] usb 2-1.4: usb auto-suspend, wakeup 1 [ 281.130998] hub 2-1:1.0: hub_suspend [ 281.137788] usb 2-1: usb auto-suspend, wakeup 1 [ 281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.177828] usb 2-1: usb wakeup-resume [ 281.197839] usb 2-1: Waited 0ms for CONNECT [ 281.197850] usb 2-1: finish resume [ 281.197984] hub 2-1:1.0: hub_resume [ 281.198203] usb 2-1-port4: status 0203 change 0000 [ 281.198228] usb usb2-port1: resume, status 0 [ 281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 281.217835] usb 2-1.4: usb wakeup-resume [ 281.237834] usb 2-1.4: Waited 0ms for CONNECT [ 281.237845] usb 2-1.4: finish resume [ 281.237990] hub 2-1.4:1.0: hub_resume [ 281.238067] usb 2-1.4-port2: status 0263 change 0000 [ 281.238148] usb 2-1-port4: resume, status 0 [ 281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s [ 281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.238385] hub 2-1.4:1.0: hub_suspend [ 281.238523] usb 2-1.4: usb auto-suspend, wakeup 1 [ 281.258076] hub 2-1:1.0: hub_suspend [ 281.265744] usb 2-1: usb auto-suspend, wakeup 1 [ 281.285976] hub 2-0:1.0: hub_suspend [ 281.285988] usb usb2: bus auto-suspend, wakeup 1 USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If the link is in a non-U0 state, then the device must transition the link to U0 prior to sending the remote wake message", but the hub only transits the link to U0 after signaling remote wakeup. So be more forgiving and use a 20ms delay to let the link transit to U0 for remote wakeup. Suggested-by: Alan Stern <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: dwc2: drd: restore role and overrides upon resumeFabrice Gasnier2-6/+42
Override enable bits may not be restored when going to low power mode (e.g. when in DWC2_POWER_DOWN_PARAM_NONE). These bits are set when probing/initializing drd (role switch). Restore them upon resume from low power mode (in case these have been lost). To achieve this, the last known role is restored upon resume. And the override enable bits are always set when configuring aval, bval and vbval. When resuming, forcing the role should be done only once, or this can cause port changes in HOST mode for instance. So, only restore FORCEDEVMODE/FORCEHOSTMODE when role_sw is unused Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Fabrice Gasnier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: dwc2: drd: add role-switch-default-node supportFabrice Gasnier2-0/+16
When using usb-role-switch, while the usb role is not yet define (USB_ROLE_NONE), the user may want to configure the default mode to host or device. Use role-switch-default-mode for that purpose. Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Amelie Delaunay <[email protected]> Signed-off-by: Fabrice Gasnier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: chipidea: Set the DT node on the child deviceRob Herring1-0/+1
The ChipIdea glue drivers just copy the glue resources to the "ci_hdrc" child device. Instead, set the child device's DT node pointer to the parent device's node so that platform_get_irq() can find the IRQ resources in the DT. This removes the need for statically populating the IRQ resources from the DT which has been deprecated for some time. Acked-by: Peter Chen <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: uhci: Use platform_get_irq() to get the interruptRob Herring1-1/+5
Accessing platform device resources directly has long been deprecated for DT as IRQ resources may not be available at device creation time. Drivers continuing to use static IRQ resources is blocking removing the static setup from the DT core code. Acked-by: Alan Stern <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: ohci-s3c2410: Use platform_get_irq() to get the interruptRob Herring1-2/+8
Accessing platform device resources directly has long been deprecated for DT as IRQ resources may not be available at device creation time. Drivers relying on the static IRQ resources is blocking removing the static setup from the DT core code. Reviewed-by: Krzysztof Kozlowski <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: ohci-spear: Remove direct access to platform_device resource listRob Herring1-1/+1
The memory resource is already retrieved with platform_get_resource(), so let's use it instead of assuming it is the first resource in the array. Acked-by: Alan Stern <[email protected]> Signed-off-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17Revert "usb: early: convert to readl_poll_timeout_atomic()"Greg Kroah-Hartman1-4/+11
This reverts commit 796eed4b2342c9d6b26c958e92af91253a2390e1. This change causes boot lockups when using "arlyprintk=xdbc" because ktime can not be used at this point in time in the boot process. Also, it is not needed for very small delays like this. Reported-by: Mathias Nyman <[email protected]> Reported-by: Peter Zijlstra <[email protected]> Cc: Jann Horn <[email protected]> Cc: Chunfeng Yun <[email protected]> Fixes: 796eed4b2342 ("usb: early: convert to readl_poll_timeout_atomic()") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17usb: hub: make wait_for_connected() take an int instead of a pointer to intDan Carpenter1-3/+3
The wait_for_connected() function doesn't modify "*port1" and there is no need to pass a pointer. Just pass the int itself. Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20211210142028.GB18906@kili Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-17Merge tag 'usb-serial-5.16-rc6' of ↵Greg Kroah-Hartman2-2/+12
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.16-rc6 Here's a fix for a reported problem in the cp210x gpio-registration code and some more modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Telit FN990 compositions USB: serial: cp210x: fix CP2105 GPIO registration
2021-12-16usb: chipidea: tegra: Add runtime PM and OPP supportDmitry Osipenko1-7/+46
The Tegra USB controller belongs to the core power domain and we're going to enable GENPD support for the core domain. Now USB controller must be resumed using runtime PM API in order to initialize the USB power state. We already support runtime PM for the CI device, but CI's PM is separated from the RPM managed by tegra-usb driver. Add runtime PM and OPP support to the driver. Acked-by: Peter Chen <[email protected]> Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-15usb: hub: avoid warm port reset during USB3 disconnectMathias Nyman1-5/+19
During disconnect USB-3 ports often go via SS.Inactive link error state before the missing terminations are noticed, and link finally goes to RxDetect state Avoid immediately warm-resetting ports in SS.Inactive state. Let ports settle for a while and re-read the link status a few times 20ms apart to see if the ports transitions out of SS.Inactive. According to USB 3.x spec 7.5.2, a port in SS.Inactive should automatically check for missing far-end receiver termination every 12 ms (SSInactiveQuietTimeout) The futile multiple warm reset retries of a disconnected device takes a lot of time, also the resetting of a removed devices has caused cases where the reset bit got stuck for a long time on xHCI roothub. This lead to issues in detecting new devices connected to the same port shortly after. Tested-by: Mark Pearson <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15usb: host: xen-hcd: add missing unlock in error pathYang Yingliang1-0/+3
Add the missing unlock before return from function xenhcd_urb_request_done() and xenhcd_conn_notify() in the error handling case. Fixes: 494ed3997d75 ("usb: Introduce Xen pvUSB frontend (xen hcd)") Reported-by: Hulk Robot <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15usb: dwc2: platform: adopt dev_err_probe() to silent probe deferAmelie Delaunay1-37/+16
In case of probe defer, a message is logged for resets and clocks. Use dev_err_probe to log the message only when error code is not -517. Simplify phy, regulators and drd probe defer handling with dev_err_probe(). Then, take benefit of devices_deferred debugfs in case of probe deferral. Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Amelie Delaunay <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15usb: typec: tcpm: fix tcpm unregister port but leave a pending timerXu Yang1-5/+13
In current design, when the tcpm port is unregisterd, the kthread_worker will be destroyed in the last step. Inside the kthread_destroy_worker(), the worker will flush all the works and wait for them to end. However, if one of the works calls hrtimer_start(), this hrtimer will be pending until timeout even though tcpm port is removed. Once the hrtimer timeout, many strange kernel dumps appear. Thus, we can first complete kthread_destroy_worker(), then cancel all the hrtimers. This will guarantee that no hrtimer is pending at the end. Fixes: 3ed8e1c2ac99 ("usb: typec: tcpm: Migrate workqueue to RT priority for processing events") cc: <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Signed-off-by: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restorePawel Laszczak1-0/+12
Patch puts content of cdnsp_gadget_pullup function inside spin_lock_irqsave and spin_lock_restore section. This construction is required here to keep the data consistency, otherwise some data can be changed e.g. from interrupt context. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Reported-by: Ken (Jian) He <[email protected]> cc: <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> -- Changelog: v2: - added disable_irq/enable_irq as sugester by Peter Chen drivers/usb/cdns3/cdnsp-gadget.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) Reviewed-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)Jimmy Wang1-0/+3
This device doesn't work well with LPM, losing connectivity intermittently. Disable LPM to resolve the issue. Reviewed-by: <[email protected]> Signed-off-by: Jimmy Wang <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15usb: xhci: Extend support for runtime power management for AMD's Yellow carp.Nehal Bakulchandra Shah1-1/+5
AMD's Yellow Carp platform has few more XHCI controllers, enable the runtime power management support for the same. Signed-off-by: Nehal Bakulchandra Shah <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probeAmelie Delaunay1-0/+3
When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies on sensing comparators. This detection needs time to stabilize. A delay was already applied in dwc2_resume() when reactivating the detection, but it wasn't done in dwc2_probe(). This patch adds delay after enabling STM ID/VBUS detection. Then, ID state is good when initializing gadget and host, and avoid to get a wrong Connector ID Status Change interrupt. Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS") Cc: stable <[email protected]> Acked-by: Minas Harutyunyan <[email protected]> Signed-off-by: Amelie Delaunay <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-15USB: gadget: bRequestType is a bitfield, not a enumGreg Kroah-Hartman3-9/+9
Szymon rightly pointed out that the previous check for the endpoint direction in bRequestType was not looking at only the bit involved, but rather the whole value. Normally this is ok, but for some request types, bits other than bit 8 could be set and the check for the endpoint length could not stall correctly. Fix that up by only checking the single bit. Fixes: 153a2d7e3350 ("USB: gadget: detect too-big endpoint 0 requests") Cc: Felipe Balbi <[email protected]> Reported-by: Szymon Heidrich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-14USB: serial: option: add Telit FN990 compositionsDaniele Palmas1-0/+8
Add the following Telit FN990 compositions: 0x1070: tty, adb, rmnet, tty, tty, tty, tty 0x1071: tty, adb, mbim, tty, tty, tty, tty 0x1072: rndis, tty, adb, tty, tty, tty, tty 0x1073: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-12-14USB: serial: cp210x: fix CP2105 GPIO registrationJohan Hovold1-2/+4
When generalising GPIO support and adding support for CP2102N, the GPIO registration for some CP2105 devices accidentally broke. Specifically, when all the pins of a port are in "modem" mode, and thus unavailable for GPIO use, the GPIO chip would now be registered without having initialised the number of GPIO lines. This would in turn be rejected by gpiolib and some errors messages would be printed (but importantly probe would still succeed). Fix this by initialising the number of GPIO lines before registering the GPIO chip. Note that as for the other device types, and as when all CP2105 pins are muxed for LED function, the GPIO chip is registered also when no pins are available for GPIO use. Reported-by: Maarten Brock <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: c8acfe0aadbe ("USB: serial: cp210x: implement GPIO support for CP2102N") Cc: [email protected] # 4.19 Cc: Karoly Pados <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Tested-by: Maarten Brock <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-12-13exit: Rename complete_and_exit to kthread_complete_and_exitEric W. Biederman2-2/+2
Update complete_and_exit to call kthread_exit instead of do_exit. Change the name to reflect this change in functionality. All of the users of complete_and_exit are causing the current kthread to exit so this change makes it clear what is happening. Move the implementation of kthread_complete_and_exit from kernel/exit.c to to kernel/kthread.c. As this function is kthread specific it makes most sense to live with the kthread functions. There are no functional change. Signed-off-by: "Eric W. Biederman" <[email protected]>
2021-12-13usb: cdnsp: Fix incorrect status for control requestPawel Laszczak1-0/+2
Patch fixes incorrect status for control request. Without this fix all usb_request objects were returned to upper drivers with usb_reqest->status field set to -EINPROGRESS. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <[email protected]> Reported-by: Ken (Jian) He <[email protected]> Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-12-13usb: cdnsp: Fix issue in cdnsp_log_ep trace eventPawel Laszczak1-2/+2
Patch fixes incorrect order of __entry->stream_id and __entry->state parameters in TP_printk macro. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <[email protected]> Reviewed-by: Peter Chen <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.