| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Root-cause:
There is an issue like endpoint is not recognized as primed, when bus
have more pressure and the add dTD tripwire semaphore (ATDTW bit in
USBCMD register) that can cause the controller to ignore a dTD that is
added to a primed endpoint.
This issue observed with the Windows10 host machine.
Workaround:
The software must implement a periodic cycle, and check for each dTD,
if the endpoint is primed. It can do this by reading the corresponding
bits in the ENDPTPRIME and ENDPTSTAT registers. If these bits are read
at 0, the software needs to re-prime the endpoint by writing 1 to the
corresponding bit in the ENDPTPRIME register.
Added conditional revision check of 2.20[CI_REVISION_22].
Link: https://lore.kernel.org/linux-usb/SJ0PR02MB8644CBBA848A0F68323F1AA5D4D99@SJ0PR02MB8644.namprd02.prod.outlook.com/
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Piyush Mehta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.15-rc5 that resolve a number of
reported issues:
- gadget driver fixes
- xhci build warning fixes
- build configuration fix
- cdc-acm tty handling fixes
- cdc-wdm fix
- typec fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-acm: fix break reporting
USB: cdc-acm: fix racy tty buffer accesses
usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize
usb: cdc-wdm: Fix check for WWAN
usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle
usb: typec: tcpm: handle SRC_STARTUP state if cc changes
usb: typec: tcpci: don't handle vSafe0V event if it's not enabled
usb: typec: tipd: Remove dependency on "connector" child fwnode
Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
usb: dwc3: gadget: Revert "set gadgets parent to the right controller"
usb: xhci: tegra: mark PM functions as __maybe_unused
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a larger than normal update for Arm SoC specific code, most of
it in device trees, but also drivers and the omap and at91/sama7
platforms:
- There are four new entries to the MAINTAINERS file: Sven Peter and
Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
and Vignesh Raghavendra for TI K3
- Build fixes to address randconfig warnings in sharpsl, dove, omap1,
and qcom platforms as well as the scmi and op-tee subsystems
- Regression fixes for missing CONFIG_FB and other options for
several defconfigs
- Several bug fixes for the newly added Microchip SAMA7 platform,
mostly regarding power management
- Missing SMP barriers to protect accesses to SCMI virtio device
- Regression fixes for TI OMAP, including a boot-time hang on am335x.
- Lots of bug fixes for NXP i.MX, mostly addressing incorrect
settings in devicetree files, and one revert for broken suspend.
- Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
of schema warnings.
- Regression fixes for qualcomm SoC specific drivers and devicetree
files, reverting an mdt_loader change and at least pastially
reverting some of the 5.15 DTS changes, plus some minor bugfixes"
* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
firmware: arm_scmi: Add proper barriers to scmi virtio device
firmware: arm_scmi: Simplify spinlocks in virtio transport
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
ARM: sharpsl_param: work around -Wstringop-overread warning
ARM: defconfig: gemini: Restore framebuffer
ARM: dove: mark 'putc' as inline
ARM: omap1: move omap15xx local bus handling to usb.c
MAINTAINERS: Add Vignesh to TI K3 platform maintainership
arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
arm64: dts: ls1028a: fix eSDHC2 node
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
ARM: at91: pm: preload base address of controllers in tlb
ARM: at91: pm: group constants and addresses loading
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
...
|
|
When the module boots into QDL download mode it exposes the 1199:90d2
ids, which can be mapped to the qcserial driver, and used to run
firmware upgrades (e.g. with the qmi-firmware-update program).
T: Bus=01 Lev=03 Prnt=08 Port=03 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=90d2 Rev=00.00
S: Manufacturer=Sierra Wireless, Incorporated
S: Product=Sierra Wireless EM9191
S: SerialNumber=8W0382004102A109
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=2mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=qcserial
Signed-off-by: Aleksander Morgado <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
This reverts commit ce3e90d5a0cdbcb2ddebbf9e4363e59fa779ad3a.
The commit in question added list of quirky hubs, but the match
implementation clearly hasn't been tested at all.
First, hub_udev->dev.parent does not represent a USB interface so using
to_usb_interface() makes no sense and we'd be passing a random pointer
to usb_match_id().
Second, if hub_udev is a root hub it doesn't even even represent a USB
device.
Signed-off-by: Johan Hovold <[email protected]>
Fixes: ce3e90d5a0cd ("usb: misc: ehset: Workaround for "special" hubs")
Cc: Razvan Heghedus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add usb product id of the Quectel EC200S-CN module.
usb-devices output for 0x6002:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=6002 Rev=03.18
S: Manufacturer=Android
S: Product=Android
S: SerialNumber=0000
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
Signed-off-by: Yu-Tung Chang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
Adding support for Quectel EG91 LTE module.
The interface layout is same as for EG95.
usb-devices output:
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=2c7c ProdID=0191 Rev=03.18
S: Manufacturer=Android
S: Product=Android
C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
Interfaces:
0: Diag
1: GNSS
2: AT-command interface/modem
3: Modem
4: QMI
Signed-off-by: Tomaz Solc <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
Add the following Telit LE910Cx composition:
0x1204: tty, adb, mbim, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
This fixes the following checkpatch.pl warnings:
drivers/usb/core/config.c:989: CHECK:ALLOC_SIZEOF_STRUCT: Prefer kzalloc(sizeof(*bos)...) over kzalloc(sizeof(struct usb_bos_descriptor)...)
drivers/usb/core/config.c:1010: CHECK:ALLOC_SIZEOF_STRUCT: Prefer kzalloc(sizeof(*dev->bos)...) over kzalloc(sizeof(struct usb_host_bos)...)
Signed-off-by: Robert Greener <[email protected]>
Link: https://lore.kernel.org/r/20211001151350.ijiexr3ebwvypmdd@shortbread
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit 38225f2ef2f4 ("ARM/omap1: switch to use dma_direct_set_offset for
lbus DMA offsets") removed a lot of mach/memory.h, but left the USB
offset handling split into arch/arm/mach-omap1/usb.c and
drivers/usb/host/ohci-omap.c.
This can cause a randconfig build warning that now fails the build
with -Werror:
arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable]
561 | static struct notifier_block omap_1510_usb_ohci_nb = {
| ^~~~~~~~~~~~~~~~~~~~~
Move it all into the platform file to get rid of the final
location that relies on mach/memory.h.
Acked-by: Felipe Balbi <[email protected]>
Acked-by: Alan Stern <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
A recent change that started reporting break events forgot to push the
event to the line discipline, which meant that a detected break would
not be reported until further characters had been receive (the port
could even have been closed and reopened in between).
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: [email protected]
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A recent change that started reporting break events to the line
discipline caused the tty-buffer insertions to no longer be serialised
by inserting events also from the completion handler for the interrupt
endpoint.
Completion calls for distinct endpoints are not guaranteed to be
serialised. For example, in case a host-controller driver uses
bottom-half completion, the interrupt and bulk-in completion handlers
can end up running in parallel on two CPUs (high-and low-prio tasklets,
respectively) thereby breaking the tty layer's single producer
assumption.
Fix this by holding the read lock also when inserting characters from
the bulk endpoint.
Fixes: 08dff274edda ("cdc-acm: fix BREAK rx code path adding necessary calls")
Cc: [email protected]
Acked-by: Oliver Neukum <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Async feedback patches broke enumeration on Windows 10 previously fixed
by commit 789ea77310f0 ("usb: gadget: f_uac2: always increase endpoint
max_packet_size by one audio slot").
While the existing calculation for EP OUT capture for async mode yields
size+1 frame due to uac2_opts->fb_max > 0, playback side lost the +1
feature. Therefore the +1 frame addition must be re-introduced for
playback. Win10 enumerates the device only when both EP IN and EP OUT
max packet sizes are (at least) +1 frame.
Fixes: e89bb4288378 ("usb: gadget: u_audio: add real feedback implementation")
Cc: stable <[email protected]>
Tested-by: Henrik Enquist <[email protected]>
Tested-by: Jack Pham <[email protected]>
Signed-off-by: Pavel Hofman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
CONFIG_WWAN_CORE was with CONFIG_WWAN in commit 89212e160b81 ("net: wwan:
Fix WWAN config symbols"), but did not update all users of it. Change it
back to use CONFIG_WWAN instead.
Fixes: 89212e160b81 ("net: wwan: Fix WWAN config symbols")
Cc: <[email protected]>
Signed-off-by: Rikard Falkeborn <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When passing 'phys' in the devicetree to describe the USB PHY phandle
(which is the recommended way according to
Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the
following NULL pointer dereference is observed on i.MX7 and i.MX8MM:
[ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098
[ 1.498170] Mem abort info:
[ 1.500966] ESR = 0x96000044
[ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1.509356] SET = 0, FnV = 0
[ 1.512416] EA = 0, S1PTW = 0
[ 1.515569] FSC = 0x04: level 0 translation fault
[ 1.520458] Data abort info:
[ 1.523349] ISV = 0, ISS = 0x00000044
[ 1.527196] CM = 0, WnR = 1
[ 1.530176] [0000000000000098] user address but active_mm is swapper
[ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP
[ 1.542125] Modules linked in:
[ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3
[ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT)
[ 1.557133] Workqueue: events_unbound deferred_probe_work_func
[ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
[ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510
[ 1.573973] lr : imx7d_charger_detection+0x22c/0x510
This happens because the charger functions check for the phy presence
inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea
core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc'
(ci->usb_phy) instead.
This causes the NULL pointer dereference inside imx7d_charger_detection().
Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found.
Tested on a imx7s-warp board.
Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection")
Cc: [email protected]
Reported-by: Heiko Thiery <[email protected]>
Tested-by: Frieder Schrempf <[email protected]>
Reviewed-by: Frieder Schrempf <[email protected]>
Acked-by: Peter Chen <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
TCPM for DRP should do the same action as SRC_ATTACHED when cc changes in
SRC_STARTUP state. Otherwise, TCPM will transition to SRC_UNATTACHED state
which is not satisfied with the Type-C spec.
Per Type-C spec:
DRP port should move to Unattached.SNK instead of Unattached.SRC if sink
removed.
Fixes: 4b4e02c83167 ("typec: tcpm: Move out of staging")
cc: <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Xu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
USB TCPCI Spec, 4.4.3 Mask Registers:
"A masked register will still indicate in the ALERT register, but shall
not set the Alert# pin low."
Thus, the Extended Status will still indicate in ALERT register if vSafe0V
is detected by TCPC even though being masked. In current code, howerer,
this event will not be handled in detection time. Rather it will be
handled when next ALERT event coming(CC evnet, PD event, etc).
Tcpm might transition to a wrong state in this situation. Thus, the vSafe0V
event should not be handled when it's masked.
Fixes: 766c485b86ef ("usb: typec: tcpci: Add support to report vSafe0V")
cc: <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Xu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is no "connector" child node available on every
platform, so the driver can't fail to probe when it's
missing.
Fixes: 57560ee95cb7 ("usb: typec: tipd: Don't block probing of consumer of "connector" nodes")
Cc: [email protected] # 5.14+
Reported-by: "Regupathy, Rajaram" <[email protected]>
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This reverts commit cb9c1cfc86926d0e86d19c8e34f6c23458cd3478 for
USB_LED_TRIG. This config symbol has bool type and enables extra code
in usb_common itself, not a separate driver. Enabling it should not
force usb_common to be built-in!
Fixes: cb9c1cfc8692 ("usb: Kconfig: using select for USB_COMMON dependency")
Cc: stable <[email protected]>
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Salvatore Bonaccorso <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The commit c6e23b89a95d ("usb: dwc3: gadget: set gadgets parent to the right
controller") changed the device for the UDC and broke the user space scripts
that instantiate the USB gadget(s) via ConfigFS.
Revert it for now until the better solution will be proposed.
Fixes: c6e23b89a95d ("usb: dwc3: gadget: set gadgets parent to the right controller")
Tested-by: Ferry Toth <[email protected]>
Cc: Michael Grzeschik <[email protected]>
Cc: Felipe Balbi <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The added #ifdefs in the PM rework were almost correct, but still
cause warnings in some randconfig builds:
drivers/usb/host/xhci-tegra.c:2147:12: error: 'tegra_xusb_resume' defined but not used [-Werror=unused-function]
2147 | static int tegra_xusb_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~
drivers/usb/host/xhci-tegra.c:2105:12: error: 'tegra_xusb_suspend' defined but not used [-Werror=unused-function]
2105 | static int tegra_xusb_suspend(struct device *dev)
Replace the #ifdef checks with simpler __maybe_unused annotations to
reliably shut up these warnings.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 971ee247060d ("usb: xhci: tegra: Enable ELPG for runtime/system PM")
Reviewed-by: JC Kuo <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
When the UDC is not found, print also the error code for easier debugging.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Instead of duplicating, use pr_fmt() to prefix pr_*() messages.
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Currently, the UVC function is activated when open on the corresponding
v4l2 device is called. On another open the activation of the function
fails since the deactivation counter in `usb_function_activate` equals
0. However the error is not returned to userspace since the open of the
v4l2 device is successful.
On a close the function is deactivated (since deactivation counter still
equals 0) and the video is disabled in `uvc_v4l2_release`, although the
UVC application potentially is streaming.
Move activation of UVC function to subscription on UVC_EVENT_SETUP
because there we can guarantee for a userspace application utilizing
UVC. Block subscription on UVC_EVENT_SETUP while another application
already is subscribed to it, indicated by `bool func_connected` in
`struct uvc_device`. Extend the `struct uvc_file_handle` with member
`bool is_uvc_app_handle` to tag it as the handle used by the userspace
UVC application.
With this a process is able to check capabilities of the v4l2 device
without deactivating the function for the actual UVC application.
Reviewed-By: Michael Tretter <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Thomas Haemmerle <[email protected]>
Signed-off-by: Michael Tretter <[email protected]>
Signed-off-by: Michael Grzeschik <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The only usage of wdm_wwan_port_ops is to pass its address to
wwan_create_port() which takes a pointer to const wwan_port_ops as
argument. Make it const to allow the compiler to put it in read-only
memory.
Signed-off-by: Rikard Falkeborn <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This patch fixes the checkpatch.pl warning:
WARNING: min() should probably be min_t(size_t, count, MAX_TRANSFER)
+ size_t writesize = min(count, (size_t)MAX_TRANSFER);
Signed-off-by: Philipp Hortmann <[email protected]>
Link: https://lore.kernel.org/r/20210922212037.GA8110@matrix-ESPRIMO-P710
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Currently the driver depends on the bootloader to enable the clocks.
Add support for clocking. The patch enables the clock at probe and
disables them at remove.
Signed-off-by: Shubhrajyoti Datta <[email protected]>
Acked-by: Felipe Balbi <[email protected]>
Link: https://lore.kernel.org/r/054de6deeab81020eaf0399add2839c36b64275f.1632805672.git.shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use xhci_dbg() to print log instead of xhci_err() due to it's not
error log.
Signed-off-by: Chunfeng Yun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Now that Kees Cook has added a definition for HCS_N_PORTS_MAX in
commit 72dd1843232c ("USB: EHCI: Add register array bounds to HCS
ports"), the code in ehci_hub_control() which sanitizes port index
values can be improved a little.
The idea behind this change is that it prevents a possible
out-of-bounds pointer computation, which the compiler might be able to
detect since the port_status[] array now has a fixed length rather
than a variable length.
Signed-off-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Remove the debug info which should be instead with ftrace
Acked-by: Felipe Balbi <[email protected]>
Signed-off-by: Zhiwei Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/20210928233935.GA299525@embeddedor
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Support programming USB PHY into OTG mode.
Signed-off-by: Dmitry Osipenko <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use dma_map_single() instead of pci_map_single(),
because only dma_map_single() is called here.
Signed-off-by: Cai Huoqing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use dma_map_single() instead of pci_map_single(),
because only dma_map_single() is called here.
Signed-off-by: Cai Huoqing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Use dma_map_single() instead of pci_map_single(),
because only dma_map_single() is called here.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Cai Huoqing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The Apple i2c bus uses I2C_FUNC_I2C and I've tested this quite
extensivly in the past days. Remove the FIXME about that testing :-)
Reviewed-by: Alyssa Rosenzweig <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The Apple CD321x comes up in a low-power state after boot. Usually, the
bootloader will already power it up to S0 but let's do it here as well
in case that didn't happen.
Suggested-by: Stan Skowronek <[email protected]>
Reviewed-by: Alyssa Rosenzweig <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Apple CD321x chips are a variant of the TI TPS 6598x chips.
The major differences are the changed interrupt numbers and
the concurrent connection to the SMC which we must not disturb.
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If no interrupts are set in IntEventX directly skip to the end of the
interrupt handler and return IRQ_NONE instead of IRQ_HANDLED.
This possibly allows to detect spurious interrupts if the i2c bus is fast
enough.
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Split the handlers for the individual interrupts into their own functions
to prepare for adding a second interrupt handler for the Apple CD321x
chips
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The commit 217504a05532 ("usb: typec: ucsi: Work around PPM
losing change information") had solved this issue
previously, but in a really complex manner. The core issue
is that on some platforms the EC firmware does not interrupt
the driver on unplug event in some cases, mainly when the
cable is unplugged immediately after the plug-in.
From now on handling that problem by simply re-checking new
connections.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Polling also the PDOs, just like the alt modes.
After this ucsi_handle_connector_change() doesn't execute
any commands.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
UCSI does not tell the driver explicitly when the firmware
(PPM in UCSI lingo) has actually detected the partner
alternate modes, there is no specific change event for that.
That's why they have to be checked with any notification
that informs that PD contract with that partner has been
achieved.
Previously the alternate modes were checked always when the
firmware (PPM) informed that something with the partner had
changed, but on some platforms the EC firmware does not
generate separate events for generic partner changes at all.
On those platforms the EC firmware notifies the driver only
about connections, or separately about the PD contract if it
was not achieved soon enough after the initial connection
event.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The huge delay was there to workaround a problem where the
firmware did not report that it was busy with the alternate
mode commands. Now that the alternate modes are polled, the
delay can be dropped.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The "poll worker" that is introduced here is first used for
checking partner alternate modes, but it can later be used
for any partner task that requires a separate job to be
scheduled to the connector specific workqueues.
The mechanism allows the partner device specific tasks to be
polling tasks and also delayed tasks if necessary.
By polling the partner alternate modes with this mechanism
the long command completion timeout value can be reduced
back to normal. The long command completion timeout was only
used to work around a problem on some platforms where the EC
firmware (PPM) didn't return BUSY even when it should with
the alt mode commands.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
If the PPM says it's busy, we can now simply try again.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This makes it possible to execute next command immediately
after the busy condition.
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There is a spelling mistake in a comment. Fix it.
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Signed-off-by: Xu Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The USB2.0 spec chapter 11.24.2.13 says that the USB port which is going
under test needs to be put in suspend state before sending the test
command. Many hubs, don't enforce this precondition and they work fine
without this step. But there are some "special" hubs, which requires to
disable the port power before sending the test command.
Because the USB spec mention that the port should be suspended, also
do this step before sending the test command. This could rise the
problem with other hubs which are not compliant with the spec and the
test command will not work if the port is suspend. If such hubs are
found, a similar workaround like the disable part could be implemented
to skip the suspend port command.
Signed-off-by: Razvan Heghedus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|