aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)AuthorFilesLines
2012-02-24usb-serial: Add support for the Sealevel SeaLINK+8 2038-ROHS deviceScott Dial2-0/+8
This patch adds new device IDs to the ftdi_sio module to support the new Sealevel SeaLINK+8 2038-ROHS device. Signed-off-by: Scott Dial <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24USB: qcserial: don't grab QMI port on Gobi 1000 devicesDan Williams1-43/+62
Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24USB: serial: remove usb_serial_register and usb_serial_deregisterGreg Kroah-Hartman1-10/+2
No one uses them anymore, they should be using the safer usb_serial_register_drivers() and usb_serial_deregister_drivers() functions instead. Thanks to Alan Stern for writing these functions and porting all in-kernel users to them. Cc: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: use new registration API in keyspan_pda.cGreg Kroah-Hartman1-46/+13
This was missed in Alan's last round of conversions. Cc: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: use new registration API in [t-z]* driversAlan Stern6-121/+48
This patch (as1529) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: ti_usb_3410_5052, usb_debug, visor, vivopay-serial, whiteheat, and zio. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: use new registration API in [q-s]* driversAlan Stern8-132/+64
This patch (as1528) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: qcaux, qcserial, safe_serial, siemens_mpi, sierra, spcp8x5, ssu100, and symbolserial. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: use new registration API in [n-p]* driversAlan Stern6-88/+45
This patch (as1527) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: navman, omninet, opticon, option, oti6858, and pl2303. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: use new registration API in [k-m]* driversAlan Stern8-146/+64
This patch (as1526) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: keyspan, kl5kusb105, kobil_sct, mct_u232, mos7720, mos7840, and moto_modem. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: use new registration API in [i-j]* driversAlan Stern7-131/+61
This patch (as1525) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: io_edgeport, io_ti, ipaq, ipw, ir-usb, and iuu_phoenix. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: use new registration API in [d-h]* driversAlan Stern6-102/+52
This patch (as1524) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: digi_acceleport, empeg, ftdi_sio, funsoft, garmin_gps, and hp4x. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: use new registration API in [a-c]* driversAlan Stern7-125/+60
This patch (as1523) modifies the following usb-serial drivers to utilize the new usb_serial_{de}register_drivers() routines: aircable, ark3116, belkin_sa, ch341, cp210x, cyberjack, and cypress_m8. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-24usb-serial: new API for driver registrationAlan Stern2-11/+81
This patch (as1522) adds two new routines to the usb-serial core, for registering and unregistering serial drivers. Instead of registering the usb_driver and usb_serial_drivers separately, with error checking for each one, the drivers can all be registered and unregistered by a single function call. This reduces duplicated code. More importantly, the new core routines change the order in which the drivers are registered. Currently the usb-serial drivers are all registered first and the usb_driver is done last, which leaves a window for problems. A udev script may quickly add a new dynamic-ID for a usb-serial driver, causing the corresponding usb_driver to be probed. If the usb_driver hasn't been registered yet then an oops will occur. The new routine prevents such problems by registering the usb_driver first. To insure that it gets probed properly for already-attached serial devices, we call driver_attach() after all the usb-serial drivers have been registered. Along with adding the new routines, the patch modifies the "generic" serial driver to use them. Further patches will similarly modify all the other in-tree USB serial drivers. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-23Merge branch 'usb-3.3-rc4' into usb-nextGreg Kroah-Hartman12-27/+25
This is to pull in the xhci changes and the other fixes and device id updates that were done in Linus's tree. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-21USB: Added Kamstrup VID/PIDs to cp210x serial driver.Bruno Thomsen1-0/+2
Signed-off-by: Bruno Thomsen <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-21USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes Care cable idAndrew Lunn2-2/+8
This USB-serial cable with mini stereo jack enumerates as: Bus 001 Device 004: ID 1a61:3410 Abbott Diabetes Care It is a TI3410 inside. Signed-off-by: Andrew Lunn <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-14USB: option: cleanup zte 3g-dongle's pid in option.c[email protected]1-130/+13
1. Remove all old mass-storage ids's pid: 0x0026,0x0053,0x0098,0x0099,0x0149,0x0150,0x0160; 2. As the pid from 0x1401 to 0x1510 which have not surely assigned to use for serial-port or mass-storage port,so i think it should be removed now, and will re-add after it have assigned in future; 3. sort the pid to WCDMA and CDMA. Signed-off-by: Rui li <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-10Merge tag 'usb-3.3-rc3' into usb-nextGreg Kroah-Hartman8-47/+268
This is done to resolve a merge conflict with: drivers/usb/class/cdc-wdm.c and to better handle future patches for this driver as it is under active development at the moment. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-10Merge tag 'tty-3.3-rc3' tty-nextGreg Kroah-Hartman1-10/+6
This is needed to handle the 8250 file merge mess properly for future patches. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-10USB: serial: use dev_err_console in custom write pathsJohan Hovold10-19/+18
Use dev_err_console in write paths for devices which can be used as a console but do not use the generic write implementation. Compile-only tested. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-10USB: serial: use dev_err_console in generic writeJohan Hovold1-3/+1
Use dev_err_console in write path so that an error at least gets reported once. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-10USB: serial: fix console error reportingJohan Hovold1-1/+3
Do not report errors in write path if port is used as a console as this may trigger the same error (and error report) resulting in a loop. Reported-by: Stephen Hemminger <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-03USB: usbserial: add new PID number (0xa951) to the ftdi driverMilan Kocian2-0/+8
Signed-off-by: Milan Kocian <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-02USB: serial, use tty_standard_installJiri Slaby1-10/+6
But before that we need to reorder the calls so that we don't need to lower the reference counts if usb_autopm_get_interface fails. Signed-off-by: Jiri Slaby <[email protected]> Cc: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-01USB: add new zte 3g-dongle's pid to option.cRui li1-1/+128
As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by: Rui li <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-01USB: qcserial: don't enable autosuspendThomas Tuttle1-2/+0
We've found that qcserial devices will not always wake up reliably from autosuspend, so disable it. Signed-off-by: Thomas Tuttle <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-02-01USB: qcserial: add several new serial devicesThomas Tuttle1-0/+14
Signed-off-by: Thomas Tuttle <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-26USB: ftdi_sio: Add more identifiersAlan Cox2-0/+7
0x04d8, 0x000a: Hornby Elite Signed-off-by: Alan Cox <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24qcaux: add more Pantech UML190 and UML290 portsDan Williams1-1/+6
More ports we now know how to talk to. Signed-off-by: Dan Williams <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: cp210x: fix debug outputJohan Hovold1-7/+6
Remove superfluous newlines from debug statements. Remove unnecessary line breaks. Signed-off-by: Johan Hovold <[email protected]> Cc: Preston Fick <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24usb: serial: kobil_sct: fix compile warning:Felipe Balbi1-1/+1
Fix the following compile warning: drivers/usb/serial/kobil_sct.c: In function ‘__check_debug’: drivers/usb/serial/kobil_sct.c:719:1: warning: return from incompatible pointer type [enabled by default] Signed-off-by: Felipe Balbi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: option: Add LG docomo L-02CKentaro Matsuyama1-0/+5
Add vendor and product ID for USB 3G/LTE modem of docomo L-02C Signed-off-by: Kentaro Matsuyama <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24usb: io_ti: Make edge_remove_sysfs_attrs the port_remove method.Eric W. Biederman1-8/+2
Calling edge_remove_sysfs_attrs from edge_disconnect is too late as the device has already been removed from sysfs. Do the simple and obvious thing and make edge_remove_sysfs_attrs the port_remove method. Signed-off-by: Eric W. Biederman <[email protected]> Reported-by: Wolfgang Frisch <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: cp210x: allow more baud rates above 1MbaudJohan Hovold1-5/+6
Allow more baud rates to be set in [1M,2M] baud. Signed-off-by: Johan Hovold <[email protected]> Cc: Preston Fick <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: cp210x: initialise baud rate at openJohan Hovold1-0/+4
The newer cp2104 devices require the baud rate to be initialised after power on. Make sure it is set when port is opened. Signed-off-by: Johan Hovold <[email protected]> Cc: Preston Fick <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: cp210x: clean up, refactor and document speed handlingJohan Hovold1-14/+57
Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold <[email protected]> Cc: Preston Fick <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: cp210x: do not map baud rates to B0Johan Hovold1-2/+2
We do not implement B0 hangup yet so map low baudrates to 300bps. Signed-off-by: Johan Hovold <[email protected]> Cc: Preston Fick <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: cp210x: fix up set_termios variablesJohan Hovold1-2/+3
[Based on a patch from Johan, mangled by gregkh to keep things in line] Fix up the variable usage in the set_termios call. Signed-off-by: Johan Hovold <[email protected]> Cc: Preston Fick <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: cp210x: fix CP2104 baudrate usagePreston Fick1-6/+4
This fix changes the way baudrates are set on the CP210x devices from Silicon Labs. The CP2101/2/3 will respond to both a GET/SET_BAUDDIV command, and GET/SET_BAUDRATE command, while CP2104 and higher devices only respond to GET/SET_BAUDRATE. The current cp210x.ko driver in kernel version 3.2.0 only implements the GET/SET_BAUDDIV command. This patch implements the two new codes for the GET/SET_BAUDRATE commands. Then there is a change in the way that the baudrate is assigned or retrieved. This is done according to the CP210x USB specification in AN571. This document can be found here: http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/AN571.pdf&src=DocumentationWebPart Sections 5.3/5.4 describe the USB packets for the old baudrate method. Sections 5.5/5.6 describe the USB packets for the new method. This patch also implements the new request scheme, and eliminates the unnecessary baudrate calculations since it uses the "actual baudrate" method. This patch solves the problem reported for the CP2104 in bug 42586, and also keeps support for all other devices (CP2101/2/3). This patchfile is also attached to the bug report on bugzilla.kernel.org. This patch has been developed and test on the 3.2.0 mainline kernel version under Ubuntu 10.11. Signed-off-by: Preston Fick <[email protected]> [duplicate patch also sent by Johan - gregkh] Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: cp210x: call generic open last in openJohan Hovold1-5/+2
Make sure port is fully initialised before calling generic open. Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19Renato Caldas1-0/+1
This device is a Oscilloscope/Logic Analizer/Pattern Generator/TDR, using a Silabs CP2103 USB to UART Bridge. Signed-off-by: Renato Caldas <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: serial: ftdi additional IDsPeter Naulls2-0/+7
I tested this against 2.6.39 in the Ubuntu kernel, however I see the IDs are not in latest 3.2 git. This adds IDs for the FTDI controller in the Rainforest Automation Zigbee dongle. Signed-off-by: Peter Naulls <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: ftdi_sio: add PID for TI XDS100v2 / BeagleBone A3Peter Korsgaard2-0/+9
Port A for JTAG, port B for serial. Signed-off-by: Peter Korsgaard <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: ftdi_sio: fix initial baud rateJohan Hovold1-2/+5
Fix regression introduced by commit b1ffb4c851f1 ("USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c") which caused the termios settings to no longer be initialised at open. Consequently it was no longer possible to set the port to the default speed of 9600 baud without first changing to another baud rate and back again. Reported-by: Roland Ramthun <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Tested-by: Roland Ramthun <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-24USB: ftdi_sio: fix TIOCSSERIAL baud_base handlingJohan Hovold1-2/+1
Return EINVAL if new baud_base does not match the current one. The baud_base is device specific and can not be changed. This restores the old (pre-2005) behaviour which was changed due to a misunderstanding regarding this fact (see https://lkml.org/lkml/2005/1/20/84). Reported-by: Torbjörn Lofterud <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell41-49/+49
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Rusty Russell <[email protected]>
2012-01-09Merge branch 'usb-next' of ↵Linus Torvalds32-1653/+197
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (232 commits) USB: Add USB-ID for Multiplex RC serial adapter to cp210x.c xhci: Clean up 32-bit build warnings. USB: update documentation for usbmon usb: usb-storage doesn't support dynamic id currently, the patch disables the feature to fix an oops drivers/usb/class/cdc-acm.c: clear dangling pointer drivers/usb/dwc3/dwc3-pci.c: introduce missing kfree drivers/usb/host/isp1760-if.c: introduce missing kfree usb: option: add ZD Incorporated HSPA modem usb: ch9: fix up MaxStreams helper USB: usb-skeleton.c: cleanup open_count USB: usb-skeleton.c: fix open/disconnect race xhci: Properly handle COMP_2ND_BW_ERR USB: remove dead code from suspend/resume path USB: add quirk for another camera drivers: usb: wusbcore: Fix dependency for USB_WUSB xhci: Better debugging for critical host errors. xhci: Be less verbose during URB cancellation. xhci: Remove debugging about ring structure allocation. xhci: Remove debugging about toggling cycle bits. xhci: Remove debugging for individual transfers. ...
2012-01-08Merge branch 'for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits) Kconfig: acpi: Fix typo in comment. misc latin1 to utf8 conversions devres: Fix a typo in devm_kfree comment btrfs: free-space-cache.c: remove extra semicolon. fat: Spelling s/obsolate/obsolete/g SCSI, pmcraid: Fix spelling error in a pmcraid_err() call tools/power turbostat: update fields in manpage mac80211: drop spelling fix types.h: fix comment spelling for 'architectures' typo fixes: aera -> area, exntension -> extension devices.txt: Fix typo of 'VMware'. sis900: Fix enum typo 'sis900_rx_bufer_status' decompress_bunzip2: remove invalid vi modeline treewide: Fix comment and string typo 'bufer' hyper-v: Update MAINTAINERS treewide: Fix typos in various parts of the kernel, and fix some comments. clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR gpio: Kconfig: drop unknown symbol 'CS5535_GPIO' leds: Kconfig: Fix typo 'D2NET_V2' sound: Kconfig: drop unknown symbol ARCH_CLPS7500 ... Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new kconfig additions, close to removed commented-out old ones)
2012-01-05USB: Add USB-ID for Multiplex RC serial adapter to cp210x.cMalte Schröder1-0/+1
Hi, below patch adds the USB-ID of the serial adapters sold by Multiplex RC (www.multiplex-rc.de). Signed-off-by: Malte Schröder <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-04usb: option: add ZD Incorporated HSPA modemJanne Snabb1-0/+5
Add support for Chinese Noname HSPA USB modem which is apparently manufactured by a company called ZD Incorporated (based on texts in the Windows drivers). This product is available at least from Dealextreme (SKU 80032) and possibly in India with name Olive V-MW250. It is based on Qualcomm MSM6280 chip. I needed to also add "options usb-storage quirks=0685:7000:i" in modprobe configuration because udevd or the kernel keeps poking the embedded fake-cd-rom which fails and causes the device to reset. There might be a better way to accomplish the same. usb_modeswitch is not needed with this device. Signed-off-by: Janne Snabb <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-01-02misc latin1 to utf8 conversionsAl Viro1-3/+3
Signed-off-by: Al Viro <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.