aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial
AgeCommit message (Collapse)AuthorFilesLines
2021-01-25USB: serial: cp210x: add pid/vid for WSDA-200-USBPho Tran1-0/+1
Information pid/vid of WSDA-200-USB, Lord corporation company: vid: 199b pid: ba30 Signed-off-by: Pho Tran <[email protected]> [ johan: amend comment with product name ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-01-21USB: serial: add MaxLinear/Exar USB to Serial driverManivannan Sadhasivam3-0/+605
Add support for MaxLinear/Exar USB to Serial converters. This driver only supports XR21V141X series but it can be extended to other series from Exar as well in future. This driver is inspired from the initial one submitted by Patong Yang: https://lore.kernel.org/r/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop While the initial driver was a custom tty USB driver exposing whole new serial interface ttyXRUSBn, this version is completely based on USB serial core thus exposing the interfaces as ttyUSBn. This will avoid the overhead of exposing a new USB serial interface which the userspace tools are unaware of. The Exar XR21V141X can be used in either ACM mode using the cdc-acm driver or in "custom driver" mode in which further features such as hardware and software flow control, GPIO control and in-band line-status reporting are available. In ACM mode the device always enables RTS/CTS flow control, something which could prevent transmission in case the CTS input isn't wired up corrently. A follow-on patch will prevent cdc_acm from binding whenever this driver is enabled. Signed-off-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: fix some style nits, group related functions, drop unused callbacks, and amend commit message; a few remaining non-trivial issues will be fixed separately ] Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: f81534: drop short control-transfer checkJohan Hovold1-3/+1
There's no need to check for short control transfers when sending data so remove the redundant sanity check. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: f81232: drop short control-transfer checksJohan Hovold1-10/+2
There's no need to check for short control transfers when sending data so remove the redundant sanity checks. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: io_ti: fix a debug-message copy-paste errorJohan Hovold1-1/+1
Fix a copy-paste error in the ti_vread_sync() debug message. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: io_ti: drop short control-transfer checkJohan Hovold1-5/+1
There's no need to check for short control transfers when sending data so remove the redundant sanity check. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: upd78f0730: drop short control-transfer checkJohan Hovold1-4/+1
There's no need to check for short control transfers when sending data so remove the redundant sanity check. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: mxuport: drop short control-transfer checkJohan Hovold1-7/+0
There's no need to check for short control transfers when sending data so remove the redundant sanity check. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: cp210x: add copyright noticeJohan Hovold1-0/+1
Add a copyright notice for myself. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: cp210x: drop unused includesJohan Hovold1-3/+0
Drop include directives that are no longer used. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: cp210x: drop short control-transfer checksJohan Hovold1-12/+6
There's no need to check for short control transfers when sending data so remove the redundant sanity checks. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: cp210x: update control-characters on every changeJohan Hovold1-3/+7
Update the XON/XOFF control characters also when no other flow-control flag has changed and software flow control is enabled. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: cp210x: set IXOFF thresholdsJohan Hovold1-0/+3
At least CP2102 requires the XON/XOFF limits to be initialised in order for software input flow control (IXOFF) to work. Specifically, XOFF is never sent if the XOFF limit is left at its default value of zero. Set the limits so that input is throttled when the FIFO free level drops below 128 bytes and restarted when the FIFO fill level drops below 128 bytes. Note that the threshold values have been chosen so that they can be used also with CP2105 which has the smallest FIFO of the currently supported device types (288 byte for the SCI port). If needed the limits can be made device specific later. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: cp210x: add support for software flow controlWang Sheng Long1-2/+65
When data is transmitted between two serial ports, the phenomenon of data loss often occurs. The two kinds of flow control commonly used in serial communication are hardware flow control and software flow control. In serial communication, If you only use RX/TX/GND Pins, you can't do hardware flow. So we often used software flow control and prevent data loss. The user sets the software flow control through the application program, and the application program sets the software flow control mode for the serial port chip through the driver. For the cp210 serial port chip, its driver lacks the software flow control setting code, so the user cannot set the software flow control function through the application program. This adds the missing software flow control. Signed-off-by: Wang Sheng Long <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: rework properly on top of recent termios changes ] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-18USB: serial: pl2303: fix line-speed handling on newer chipsJohan Hovold1-1/+7
The latest chip family (HXN) apparently does not support setting the line speed using divisors and instead needs to use the direct encoding scheme for all rates. This specifically enables 50, 110, 134, 200 bps and other rates not supported by the original chip type. Fixes: ebd09f1cd417 ("USB: serial: pl2303: add support for PL2303HXN") Cc: [email protected] # 5.5 Cc: Charles Yeh <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-13USB: serial: cp210x: add new VID/PID for supporting Teraoka AD2000Chenxin Jin1-0/+1
Teraoka AD2000 uses the CP210x driver, but the chip VID/PID is customized with 0988/0578. We need the driver to support the new VID/PID. Signed-off-by: Chenxin Jin <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-01-12USB: serial: mos7720: improve OOM-handling in read_mos_reg()Tom Rix1-1/+3
clang static analysis reports this problem mos7720.c:352:2: warning: Undefined or garbage value returned to caller return d; ^~~~~~~~ In the parport_mos7715_read_data()'s call to read_mos_reg(), 'd' is only set after the alloc block. buf = kmalloc(1, GFP_KERNEL); if (!buf) return -ENOMEM; Although the problem is reported in parport_most7715_read_data(), none of the callee's of read_mos_reg() check the return status. Make sure to clear the return-value buffer also on allocation failures. Fixes: 0d130367abf5 ("USB: serial: mos7720: fix control-message error handling") Signed-off-by: Tom Rix <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: only clear the buffer on errors, amend commit message ] Signed-off-by: Johan Hovold <[email protected]>
2021-01-04USB: serial: iuu_phoenix: fix DMA from stackJohan Hovold1-5/+15
Stack-allocated buffers cannot be used for DMA (on all architectures) so allocate the flush command buffer using kmalloc(). Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver") Cc: stable <[email protected]> # 2.6.25 Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2021-01-04USB: serial: option: add LongSung M5710 module supportDaniel Palmer1-0/+1
Add a device-id entry for the LongSung M5710 module. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2df3 ProdID=9d03 Rev= 1.00 S: Manufacturer=Marvell S: Product=Mobile Composite Device Bus S: SerialNumber=<snip> C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=4096ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniel Palmer <[email protected]> https://lore.kernel.org/r/[email protected] [ johan: drop id defines, only bind to vendor class ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2021-01-04USB: serial: option: add Quectel EM160R-GLBjørn Mork1-0/+2
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: [email protected] Signed-off-by: Bjørn Mork <[email protected]> [ johan: add model comment ] Signed-off-by: Johan Hovold <[email protected]>
2020-12-11Merge tag 'usb-serial-5.11-rc1' of ↵Greg Kroah-Hartman9-969/+444
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.11-rc1 Here are the USB-serial updates for 5.11-rc1, including: - keyspan_pda write-implementation fixes - digi_acceleport write-wakeup fix - mos7720 parport-restore fix - mos7720 parport-tasklet removal - cp210x termios-handling cleanups - option device-flag fix - ftdi_sio GPIO CBUS-configuration improvements - removal of in_interrupt() uses Included are also various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (30 commits) USB: serial: ftdi_sio: log the CBUS GPIO validity USB: serial: ftdi_sio: drop GPIO line checking dead code USB: serial: ftdi_sio: report the valid GPIO lines to gpiolib USB: serial: option: add interface-number sanity check to flag handling USB: serial: cp210x: clean up dtr_rts() USB: serial: cp210x: refactor flow-control handling USB: serial: cp210x: drop flow-control debugging USB: serial: cp210x: set terminal settings on open USB: serial: cp210x: clean up line-control handling USB: serial: cp210x: return early on unchanged termios USB: serial: mos7720: defer state restore to a workqueue USB: serial: mos7720: fix parallel-port state restore USB: serial: remove write wait queue USB: serial: digi_acceleport: fix write-wakeup deadlocks USB: serial: keyspan_pda: drop redundant usb-serial pointer USB: serial: keyspan_pda: use BIT() macro USB: serial: keyspan_pda: clean up comments and whitespace USB: serial: keyspan_pda: clean up xircom/entrega support USB: serial: keyspan_pda: add write-fifo support USB: serial: keyspan_pda: increase transmitter threshold ...
2020-12-09USB: serial: ftdi_sio: log the CBUS GPIO validityMarc Zyngier1-0/+6
The validity of the ftdi CBUS GPIO is pretty hidden so far, and finding out *why* some GPIOs don't work is sometimes hard to identify. So let's help the user by displaying the map of the CBUS pins that are valid for a GPIO. Suggested-by: Linus Walleij <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Andy Shevchenko <[email protected]> [johan: demote to KERN_DEBUG, rephrase messages, drop ftx-prog warning] Signed-off-by: Johan Hovold <[email protected]>
2020-12-09USB: serial: ftdi_sio: drop GPIO line checking dead codeMarc Zyngier1-3/+0
Now that gpiolib can track the validity of GPIO pins, there is no need to check whether the line is valid in request(). Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Andy Shevchenko <[email protected]> [johan: amend commit message] Signed-off-by: Johan Hovold <[email protected]>
2020-12-09USB: serial: ftdi_sio: report the valid GPIO lines to gpiolibMarc Zyngier1-0/+14
Since it is pretty common for only some of the CBUS lines to be valid as GPIO lines, let's report such validity to the rest of the kernel. Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-12-09USB: serial: option: add interface-number sanity check to flag handlingJohan Hovold1-2/+21
Add an interface-number sanity check before testing the device flags to avoid relying on undefined behaviour when left shifting in case a device uses an interface number greater than or equal to BITS_PER_LONG (i.e. 64 or 32). Reported-by: [email protected] Fixes: c3a65808f04a ("USB: serial: option: reimplement interface masking") Cc: [email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-12-04USB: serial: cp210x: clean up dtr_rts()Johan Hovold1-4/+4
Clean up dtr_rts() by renaming the port parameter and adding missing whitespace. Signed-off-by: Johan Hovold <[email protected]>
2020-12-04USB: serial: cp210x: refactor flow-control handlingJohan Hovold1-50/+47
Add a helper function to be used to configure flow control. The flow-control code was the last caller that relied on the memset-on-failure behaviour of cp210x_read_reg_block(), which we can now drop in favour of bailing out on errors when retrieving the flow-control settings. This should also simplify adding support for software flow control. Signed-off-by: Johan Hovold <[email protected]>
2020-12-04USB: serial: cp210x: drop flow-control debuggingJohan Hovold1-5/+1
Drop some unnecessary flow-control debugging. Signed-off-by: Johan Hovold <[email protected]>
2020-12-04USB: serial: cp210x: set terminal settings on openJohan Hovold1-283/+6
Unlike other drivers cp210x have been retrieving the current terminal settings from the device on open and reflecting those in termios. Due to how set_termios() used to be implemented, this saved a few control requests on open but has instead caused problems like broken flow control and has required adding workarounds for swapped line-control in cp2108 and line-speed initialisation on cp2104. This unusual implementation also complicates adding new features for no good reason. Rip out the corresponding code and the above mentioned workarounds and instead initialise the terminal settings unconditionally on open. Signed-off-by: Johan Hovold <[email protected]>
2020-12-04USB: serial: cp210x: clean up line-control handlingJohan Hovold1-60/+41
Update the line-control settings in one request unconditionally instead of setting the word-length, parity and stop-bit settings separately. This avoids multiple requests when several settings are changed even if this scheme could potentially also be used to detect unsupported device settings. Since all device types but CP2101 appears to support all settings, let's handle that one specifically and also report back the unsupported settings properly through termios by clearing the corresponding bits. Also drop the related unnecessary debug printks. Signed-off-by: Johan Hovold <[email protected]>
2020-12-04USB: serial: cp210x: return early on unchanged termiosJohan Hovold1-0/+12
Return early from set_termios() in case no relevant terminal settings have changed. This avoids testing each parameter in turn and specifically allows the line-control handling to be cleaned up further. Signed-off-by: Johan Hovold <[email protected]>
2020-12-04USB: serial: kl5kusb105: fix memleak on openJohan Hovold1-6/+4
Fix memory leak of control-message transfer buffer on successful open(). Fixes: 6774d5f53271 ("USB: serial: kl5kusb105: fix open error path") Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-12-03USB: serial: ch341: sort device-id entriesJohan Hovold1-3/+3
Keep the device-id entries sorted to make it easier to add new ones in the right spot. Reviewed-by: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-12-03USB: serial: ch341: add new Product ID for CH341AJan-Niklas Burfeind1-0/+1
Add PID for CH340 that's found on a ch341 based Programmer made by keeyees. The specific device that contains the serial converter is described here: http://www.keeyees.com/a/Products/ej/36.html The driver works flawlessly as soon as the new PID (0x5512) is added to it. Signed-off-by: Jan-Niklas Burfeind <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-12-01USB: serial: option: fix Quectel BG96 matchingBjørn Mork1-3/+2
This is a partial revert of commit 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") The Quectel BG96 is different from most other modern Quectel modems, having serial functions with 3 endpoints using ff/ff/ff and ff/fe/ff class/subclass/protocol. Including it in the change to accommodate dynamic function mapping was incorrect. Revert to interface number matching for the BG96, assuming static layout of the RMNET function on interface 4. This restores support for the serial functions on interfaces 2 and 3. Full lsusb output for the BG96: Bus 002 Device 003: ID 2c7c:0296 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2c7c idProduct 0x0296 bcdDevice 0.00 iManufacturer 3 Qualcomm, Incorporated iProduct 2 Qualcomm CDMA Technologies MSM iSerial 4 d1098243 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 145 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 1 Qualcomm Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 254 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: Sebastian Sjoholm <[email protected]> Fixes: 2bb70f0a4b23 ("USB: serial: option: support dynamic Quectel USB compositions") Signed-off-by: Bjørn Mork <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-27USB: serial: option: add support for Thales Cinterion EXS82Giacinto Cifelli1-0/+2
There is a single option port in this modem, and it is used as debug port. lsusb -v for this device: Bus 001 Device 002: ID 1e2d:006c Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006c bcdDevice 0.00 iManufacturer 4 iProduct 3 iSerial 5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 243 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 2 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 1 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 2 CDC Union: bMasterInterface 1 bSlaveInterface 2 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 3 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 4 CDC Union: bMasterInterface 3 bSlaveInterface 4 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 5 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 6 Ethernet Networking bInterfaceProtocol 0 iInterface 0 CDC Header: bcdCDC 1.10 CDC Ethernet: iMacAddress 1 (??) bmEthernetStatistics 0x00000000 wMaxSegmentSize 16384 wNumberMCFilters 0x0001 bNumberPowerFilters 0 CDC Union: bMasterInterface 5 bSlaveInterface 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by: Giacinto Cifelli <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-20USB: serial: option: add Fibocom NL668 variantsVincent Palatin1-1/+2
Update the USB serial option driver support for the Fibocom NL668 Cat.4 LTE modules as there are actually several different variants. Got clarifications from Fibocom, there are distinct products: - VID:PID 1508:1001, NL668 for IOT (no MBIM interface) - VID:PID 2cb7:01a0, NL668-AM and NL652-EU are laptop M.2 cards (with MBIM interfaces for Windows/Linux/Chrome OS), respectively for Americas and Europe. usb-devices output for the laptop M.2 cards: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a0 Rev=03.18 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom NL652-EU Modem S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: Vincent Palatin <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-20USB: serial: mos7720: defer state restore to a workqueueDavidlohr Bueso1-199/+35
The parallel port restore operation currently defers writes to a tasklet, if it sees a locked disconnect mutex. The driver goes to a lot of trouble to ensure writes happen in a non-blocking context, but things can be greatly simplified if it's done in regular process context and this is not a system performance critical path. As such, instead of doing the state restore writes in softirq context, use a workqueue and just do regular synchronous writes. In addition to the cleanup, this also imposes less on the overall system as tasklets have been deprecated because of it's softirq implications, potentially blocking a higher priority task from running. Signed-off-by: Davidlohr Bueso <[email protected]> Link: https://lore.kernel.org/r/[email protected] [johan: amend commit message ("softirq context")] Signed-off-by: Johan Hovold <[email protected]>
2020-11-05USB: serial: mos7720: fix parallel-port state restoreJohan Hovold1-0/+2
The parallel-port restore operations is called when a driver claims the port and is supposed to restore the provided state (e.g. saved when releasing the port). Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <[email protected]> # 2.6.35 Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas1-0/+2
Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231Daniele Palmas1-0/+6
Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: add comments after entries ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: remove write wait queueJohan Hovold1-6/+6
The digi_acceleport driver is the only driver still using the port write wake queue so move it to that driver's port data. Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: digi_acceleport: fix write-wakeup deadlocksJohan Hovold1-32/+13
The driver must not call tty_wakeup() while holding its private lock as line disciplines are allowed to call back into write() from write_wakeup(), leading to a deadlock. Also remove the unneeded work struct that was used to defer wakeup in order to work around a possible race in ancient times (see comment about n_tty write_chan() in commit 14b54e39b412 ("USB: serial: remove changelogs and old todo entries")). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: [email protected] Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: cyberjack: fix write-URB completion raceJohan Hovold1-1/+6
The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable <[email protected]> # 2.6.13 Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: keyspan_pda: drop redundant usb-serial pointerJohan Hovold1-3/+2
Drop the redundant struct usb_serial pointer from the driver port data. Acked-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: keyspan_pda: use BIT() macroJohan Hovold1-12/+13
Use the BIT() macro instead of open coding. Acked-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: keyspan_pda: clean up comments and whitespaceJohan Hovold1-60/+56
Clean up comment style, remove some stale or redundant comments and drop superfluous white space. Acked-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: keyspan_pda: clean up xircom/entrega supportJohan Hovold3-75/+13
Drop the separate Kconfig symbol for Xircom / Entrega and always include support in the keyspan_pda driver. Note that all configs that enabled CONFIG_USB_SERIAL_XIRCOM also enable CONFIG_USB_SERIAL_KEYSPAN_PDA. Acked-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: keyspan_pda: add write-fifo supportJohan Hovold1-60/+55
Use the port write fifo and generic chars_and_buffer and write_room implementations when writing. This not only allows for more efficient transfers, but more importantly fixes the remaining issues related to the conservative write_room() implementation which could prevent the line discipline from making forward progress (e.g. waiting for n > 1 bytes of space to become available). Note that this also allows using the driver for the system console without dropping data when the write URB is busy (including when adding carriage return on line feed). Acked-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04USB: serial: keyspan_pda: increase transmitter thresholdJohan Hovold1-1/+1
Increase the transmitter threshold so that writing isn't resumed until 128 bytes are available in the device buffer thereby allowing for larger and more efficient transfers. Acked-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.