aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/serial/ftdi_sio.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-18USB: ftdi_sio: Added custom PID for CustomWare productsMatthijs Kooijman1-0/+4
CustomWare uses the FTDI VID with custom PIDs for their ShipModul MiniPlex products. Signed-off-by: Matthijs Kooijman <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2015-05-21USB: serial: ftdi_sio: Add support for a Motion Tracker Development BoardPatrick Riphagen1-0/+1
This adds support for new Xsens device, Motion Tracker Development Board, using Xsens' own Vendor ID Signed-off-by: Patrick Riphagen <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2015-03-25USB: ftdi_sio: Use jtag quirk for SNAP Connect E10Doug Goldstein1-2/+6
This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order to avoid attaching a TTY to the JTAG port as this board is based on the CALAO Systems reference design and needs the same fix up. Signed-off-by: Doug Goldstein <[email protected]> CC: stable <[email protected]> [johan: clean up probe logic ] Signed-off-by: Johan Hovold <[email protected]>
2015-03-16USB: ftdi_sio: Added custom PID for Synapse Wireless productDoug Goldstein1-0/+1
Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their SNAP Stick 200 product. Signed-off-by: Doug Goldstein <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2015-03-03usb: ftdi_sio: Add jtag quirk support for Cyber Cortex AV boardsMax Mansfield1-0/+2
This patch integrates Cyber Cortex AV boards with the existing ftdi_jtag_quirk in order to use serial port 0 with JTAG which is required by the manufacturers' software. Steps: 2 [ftdi_sio_ids.h] 1. Defined the device PID [ftdi_sio.c] 2. Added a macro declaration to the ids array, in order to enable the jtag quirk for the device. Signed-off-by: Max Mansfield <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2015-02-26USB: ftdi_sio: add PIDs for Actisense USB devicesMark Glover1-0/+17
These product identifiers (PID) all deal with marine NMEA format data used on motor boats and yachts. We supply the programmed devices to Chetco, for use inside their equipment. The PIDs are a direct copy of our Windows device drivers (FTDI drivers with altered PIDs). Signed-off-by: Mark Glover <[email protected]> Cc: stable <[email protected]> [johan: edit commit message slightly ] Signed-off-by: Johan Hovold <[email protected]>
2014-11-19usb: serial: ftdi_sio: add PIDs for Matrix Orbital productsTroy Clark1-0/+33
Add PIDs for new Matrix Orbital GTT series products. Signed-off-by: Troy Clark <[email protected]> Cc: stable <[email protected]> [johan: shorten commit message ] Signed-off-by: Johan Hovold <[email protected]>
2014-10-23usb: serial: ftdi_sio: add "bricked" FTDI device PIDPerry Hung1-0/+1
An official recent Windows driver from FTDI detects counterfeit devices and reprograms the internal EEPROM containing the USB PID to 0, effectively bricking the device. Add support for this VID/PID pair to correctly bind the driver on these devices. See: http://hackaday.com/2014/10/22/watch-that-windows-update-ftdi-drivers-are-killing-fake-chips/ Signed-off-by: Perry Hung <[email protected]> Cc: stable <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2014-10-22usb: serial: ftdi_sio: add Awinda Station and Dongle productsFrans Klaver1-0/+2
Add new IDs for the Xsens Awinda Station and Awinda Dongle. While at it, order the definitions by PID and add a logical separation between devices using Xsens' VID and those using FTDI's VID. Cc: <[email protected]> Signed-off-by: Frans Klaver <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2014-09-08USB: ftdi_sio: Add support for GE Healthcare Nemo Tracker deviceTaylor Braun-Jones1-0/+2
Signed-off-by: Taylor Braun-Jones <[email protected]> Cc: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-09-01USB: ftdi_sio: add support for NOVITUS Bono E thermal printerJohan Hovold1-0/+1
Add device id for NOVITUS Bono E thermal printer. Reported-by: Emanuel Koczwara <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2014-08-18USB: ftdi_sio: Added PID for new ekey deviceJaša Bartelj1-0/+2
Added support to the ftdi_sio driver for ekey Converter USB which uses an FT232BM chip. Signed-off-by: Jaša Bartelj <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2014-08-18USB: ftdi_sio: add Basic Micro ATOM Nano USB2Serial PIDJohan Hovold1-0/+1
Add device id for Basic Micro ATOM Nano USB2Serial adapters. Reported-by: Nicolas Alt <[email protected]> Tested-by: Nicolas Alt <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2014-08-01USB: serial: ftdi_sio: Add support for new Xsens devicesPatrick Riphagen1-0/+2
This adds support for new Xsens devices, using Xsens' own Vendor ID. Signed-off-by: Patrick Riphagen <[email protected]> Signed-off-by: Frans Klaver <[email protected]> Cc: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-07-16Merge tag 'usb-serial-3.17-rc1' of ↵Greg Kroah-Hartman1-59/+23
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for v3.17-rc1 Here are some minor fixes and clean-ups to the ftdi_sio, mos7840 and kl5kusb105 drivers for v3.17-rc1. Signed-off-by: Johan Hovold <[email protected]>
2014-07-11USB: serial: ftdi_sio: Add Infineon TriboardMichal Sojka1-0/+2
This adds support for Infineon TriBoard TC1798 [1]. Only interface 1 is used as serial line (see [2], Figure 8-6). [1] http://www.infineon.com/cms/de/product/microcontroller/development-tools-software-and-kits/tricore-tm-development-tools-software-and-kits/starterkits-and-evaluation-boards/starter-kit-tc1798/channel.html?channel=db3a304333b8a7ca0133cfa3d73e4268 [2] http://www.infineon.com/dgdl/TriBoardManual-TC1798-V10.pdf?folderId=db3a304412b407950112b409ae7c0343&fileId=db3a304333b8a7ca0133cfae99fe426a Signed-off-by: Michal Sojka <[email protected]> Cc: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-07-09USB: ftdi_sio: Add extra PID.Bert Vermeulen1-1/+2
This patch adds PID 0x0003 to the VID 0x128d (Testo). At least the Testo 435-4 uses this, likely other gear as well. Signed-off-by: Bert Vermeulen <[email protected]> Cc: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-07-07USB: ftdi_sio: remove redundant mtxorb quirkJohan Hovold1-39/+8
Remove redundant mtxorb quirk used to fix up incorrect wMaxPacketSize, which was added before 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet size calculation") which does the same thing for all devices. Signed-off-by: Johan Hovold <[email protected]>
2014-07-07USB: ftdi_sio: clean up ftdi_set_max_packet_size()Johan Hovold1-11/+13
Code and comment style clean ups of ftdi_set_max_packet_size(). Signed-off-by: Johan Hovold <[email protected]>
2014-07-07USB: ftdi_sio: fix max-packet-size warningJohan Hovold1-3/+2
Promote max-packet-size-override message to warning level and use the port device for logging, while using actual endpoint numbers in the message itself. Signed-off-by: Johan Hovold <[email protected]>
2014-07-07USB: ftdi_sio: make port probe less verboseJohan Hovold1-6/+0
There's no need to print the number of endpoints per interface or endpoint wMaxPacketSize during port probe. This information is readily available using lsusb should it ever be needed. Note that this also fixes the wMaxPacketSize being incorrectly reported on big-endian systems due to a missing le16_to_cpu(). Signed-off-by: Johan Hovold <[email protected]>
2014-06-23USB: ftdi_sio: fix null deref at port probeJohan Hovold1-2/+5
Fix NULL-pointer dereference when probing an interface with no endpoints. These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed. Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for ep_desc after the loop. Fixes: 895f28badce9 ("USB: ftdi_sio: fix hi-speed device packet size calculation") Reported-by: Mike Remski <[email protected]> Tested-by: Mike Remski <[email protected]> Cc: <[email protected]> # 2.6.31 Signed-off-by: Johan Hovold <[email protected]>
2014-05-27USB: ftdi_sio: add NovaTech OrionLXm product IDGeorge McCollister1-0/+2
The NovaTech OrionLXm uses an onboard FTDI serial converter for JTAG and console access. Here is the lsusb output: Bus 004 Device 123: ID 0403:7c90 Future Technology Devices International, Ltd Signed-off-by: George McCollister <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-04-16USB: serial: ftdi_sio: add id for Brainboxes serial cardsMichele Baldessari1-0/+33
Custom VID/PIDs for Brainboxes cards as reported in https://bugzilla.redhat.com/show_bug.cgi?id=1071914 Signed-off-by: Michele Baldessari <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-02-26USB: ftdi_sio: add Cressi Leonardo PIDJoerg Dorchain1-0/+2
Hello, the following patch adds an entry for the PID of a Cressi Leonardo diving computer interface to kernel 3.13.0. It is detected as FT232RL. Works with subsurface. Signed-off-by: Joerg Dorchain <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-02-05USB: ftdi_sio: add Tagsys RFID Reader IDsUlrich Hahn1-0/+2
Adding two more IDs to the ftdi_sio usb serial driver. It now connects Tagsys RFID readers. There might be more IDs out there for other Tagsys models. Signed-off-by: Ulrich Hahn <[email protected]> Cc: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-02-04usb: ftdi_sio: add Mindstorms EV3 console adapterBjørn Mork1-0/+1
Cc: stable <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-01-08usb: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-01-07USB: ftdi_sio: added CS5 quirk for broken smartcard readersColin Leitner1-2/+15
Genuine FTDI chips support only CS7/8. A previous fix in commit 8704211f65a2 ("USB: ftdi_sio: fixed handling of unsupported CSIZE setting") enforced this limitation and reported it back to userspace. However, certain types of smartcard readers depend on specific driver behaviour that requests 0 data bits (not 5) to change into a different operating mode if CS5 has been set. This patch reenables this behaviour for all FTDI devices. Tagged to be added to stable, because it affects a lot of users of embedded systems which rely on these readers to work properly. Cc: stable <[email protected]> Reported-by: Heinrich Siebmanns <[email protected]> Tested-by: Heinrich Siebmanns <[email protected]> Signed-off-by: Colin Leitner <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-01-03USB: serial: remove redundant OOM messagesJohan Hovold1-4/+1
Remove redundant error messages on allocation failures, which have already been logged. Cc: Joe Perches <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-01-03USB: serial: clean up ioctl debuggingJohan Hovold1-7/+1
Remove redundant ioctl debugging from subdrivers. The ioctl request code has already been logged by usb-serial core. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-01-03USB: serial: constify device-id tablesJohan Hovold1-1/+1
Declare device-id tables as const where possible. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-12-02USB: ftdi_sio: fixed handling of unsupported CSIZE settingColin Leitner1-13/+24
FTDI UARTs support only 7 or 8 data bits. Until now the ftdi_sio driver would only report this limitation for CS6 to dmesg and fail to reflect this fact to tcgetattr. This patch reverts the unsupported CSIZE setting and reports the fact with less severance to dmesg for both CS5 and CS6. To test the patch it's sufficient to call stty -F /dev/ttyUSB0 cs5 which will succeed without the patch and report an error with the patch applied. As an additional fix this patch ensures that the control request will always include a data bit size. Signed-off-by: Colin Leitner <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-11-07Merge tag 'usb-3.13-rc1' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver update from Greg KH: "Here's the big USB driver update for 3.13-rc1. It includes the usual xhci changes, EHCI updates to get the scheduling of USB transactions working better, and a raft of gadget and musb updates as well. All of this has been in linux-next for a while with no reported issues" * tag 'usb-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (305 commits) USB: Maintainers change for usb serial drivers usb: usbtest: support container id descriptor test usb: usbtest: support superspeed device capbility descriptor test usb: usbtest: support usb2 extension descriptor test usb: chipidea: only get vbus regulator for non-peripheral mode USB: ehci-atmel: add usb_clk for transition to CCF usb: cdc-wdm: ignore speed change notifications USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications usbatm: Fix dynamic_debug / ratelimited atm_dbg and atm_rldbg macros printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages usb: usbtest: support bos descriptor test for usb 3.0 USB: phy: samsung: Support multiple PHYs of same type usb: wusbcore: change WA_SEGS_MAX to a legal value usb: wusbcore: add a quirk for Alereon HWA device isoc behavior usb: wusbcore: combine multiple isoc frames in a single transfer request. usb: wusbcore: set the RPIPE wMaxPacketSize value correctly usb: chipidea: host: more enhancement when ci->hcd is NULL usb: ohci: remove ep93xx bus glue platform driver usb: usbtest: fix checkpatch warning as sizeof code style UWB: clean up attribute use by using ATTRIBUTE_GROUPS() ...
2013-11-01USB: serial: ftdi_sio: add id for Z3X Box deviceАлексей Крамаренко1-0/+1
Custom VID/PID for Z3X Box device, popular tool for cellphone flashing. Signed-off-by: Alexey E. Kramarenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-09-26USB: serial: call handle_dcd_change in ftdi driver.Paul Chavent1-1/+9
When the device receive a DCD status change, forward the signal to the USB serial system. This way, we can detect, for instance, PPS pulses. Signed-off-by: Paul Chavent <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-08-25USB: serial: clean up attribute permissionsGreg Kroah-Hartman1-9/+6
Clean up the DEVICE_ATTR usage in the USB serial drivers, making them more obvious as to the permissions that the sysfs files should be. Note: ftdi_sio.c still has a DEVICE_ATTR() used, that will have to wait until after 3.12-rc1 comes out when DEVICE_ATTR_WO() shows up in Linus's tree. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-08-05Merge 3.11-rc4 into usb-nextGreg Kroah-Hartman1-3/+28
We want those fixes in here also. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-07-29USB: serial: ftdi_sio: add more RT Systems ftdi devicesRick Farina (Zero_Chaos)1-3/+28
RT Systems makes many usb serial cables based on the ftdi_sio driver for programming various amateur radios. This patch is a full listing of their current product offerings and should allow these cables to all be recognized. Signed-off-by: Rick Farina (Zero_Chaos) <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-07-23USB: ftdi_sio: remove unused definesJohan Hovold1-7/+0
Remove some unused defines. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-07-23USB: ftdi_sio: remove vendor/product module parametersJohan Hovold1-33/+3
Remove the vendor and product module parameters which were added a long time ago when we did not have the dynamic sysfs interface to add new device ids (and which isn't limited to a single new vid/pid pair). A vid/pid pair can be added dynamically using sysfs, for example: echo 0403 1234 >/sys/bus/usb-serial/drivers/ftdi_sio/new_id Also fix up the in-code comment that got the sysfs path wrong. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-07-23USB: ftdi_sio: remove redundant raise of DTR/RTS at openJohan Hovold1-1/+1
Do not raise DTR/RTS a second time in set_termios at open -- this has already been taken care of by the tty layer. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-07-23USB: ftdi_sio: clean up device initialisationJohan Hovold1-5/+2
Do not use zeroed termios data to determine when to unconditionally configure the device at open. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-05-17USB: ftdi_sio: Add support for Newport CONEX motor driversGomella, Andrew (NIH/NHLBI) [F]1-0/+2
Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-05-16USB: ftdi_sio: fix chars_in_buffer overheadJohan Hovold1-14/+5
Use the new generic usb-serial wait_until_sent implementation to wait for hardware buffers to drain. This removes the need to check the hardware buffers in chars_in_buffer and thus removes the overhead introduced by commit 6f602912 ("usb: serial: ftdi_sio: Add missing chars_in_buffer function") without breaking tty_wait_until_sent (used by, for example, tcdrain, tcsendbreak and close). Reported-by: Stas Sergeev <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-05-16USB: ftdi_sio: clean up get_modem_statusJohan Hovold1-5/+4
Use usb-serial port rather than tty as argument to get_modem_status. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-04-24USB: ftdi_sio: enable two UART ports on ST Microconnect LiteAdrian Thomasset1-7/+11
The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by: Adrian Thomasset <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-04-23USB: ftdi_sio: correct ST Micro Connect Lite PIDsAdrian Thomasset1-1/+3
The current ST Micro Connect Lite uses the FT4232H hi-speed quad USB UART FTDI chip. It is also possible to drive STM reference targets populated with an on-board JTAG debugger based on the FT2232H chip with the same STMicroelectronics tools. For this reason, the ST Micro Connect Lite PIDs should be ST_STMCLT_2232_PID: 0x3746 ST_STMCLT_4232_PID: 0x3747 Signed-off-by: Adrian Thomasset <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-04-08USB: add ftdi_sio USB ID for GDM Boost V1.xStefani Seibold1-0/+1
This patch add a missing usb device id for the GDMBoost V1.x device The patch is against 3.9-rc5 Signed-off-by: Stefani Seibold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2013-03-28Merge branch 'usb-linus' into usb-nextGreg Kroah-Hartman1-0/+1
This lets us fix the build error that happens when these two trees are merged together. Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.