aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
AgeCommit message (Collapse)AuthorFilesLines
2023-04-20usb: xhci-mtk: add optional frame count clockChunfeng Yun2-1/+2
Add optional clock frmcnt_ck used on 4nm or advanced process SoC Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20230407062406.12575-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20usb: xhci: plat: Add USB 3.0 phy supportStanley Chang1-0/+15
For Realtek SoC, the usb xhci uses different driver for u2phy and u3phy. Therefore, add a hook to retrieve the USB 3.0 PHY to XHCI plat. Signed-off-by: Stanley Chang <stanley_chang@realtek.com> Link: https://lore.kernel.org/r/20230407060731.20537-1-stanley_chang@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20usb: host: xhci-plat: Use dev_is_pci() helperNobuhiro Iwamatsu1-3/+1
Use common dev_is_pci() helper for checking PCI devices. And if CONFIG_PCI is not defined, dev_is_pci returns false. Therefore, CONFIG_PCI is also unnecessary, so remove it. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20230405234605.2310155-1-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20xhci: fix debugfs register accesses while suspendedJohan Hovold1-0/+1
Wire up the debugfs regset device pointer so that the controller is resumed before accessing registers to avoid crashing or locking up if it happens to be runtime suspended. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support Cc: stable@vger.kernel.org # 4.15 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-10Merge 6.3-rc6 into usb-nextGreg Kroah-Hartman3-5/+9
We need the USB fixes in here for testing, and this resolves two merge conflicts, one pointed out by linux-next: drivers/usb/dwc3/dwc3-pci.c drivers/usb/host/xhci-pci.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30xhci: Free the command allocated for setting LPM if we return earlyMathias Nyman1-0/+1
The command allocated to set exit latency LPM values need to be freed in case the command is never queued. This would be the case if there is no change in exit latency values, or device is missing. Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Link: https://lore.kernel.org/linux-usb/24263902-c9b3-ce29-237b-1c3d6918f4fe@alu.unizg.hr Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Fixes: 5c2a380a5aa8 ("xhci: Allocate separate command structures for each LPM command") Cc: <Stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30Revert "usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS"Mathias Nyman1-4/+3
This reverts commit 4c2604a9a6899bab195edbee35fc8d64ce1444aa. Asynch probe caused regression in a setup with both Renesas and Intel xHC controllers. Devices connected to the Renesas disconnected shortly after boot. With Asynch probe the busnumbers got interleaved. xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 Reason why this commit causes regression is still unknown, but revert it while debugging the issue. Fixes: 4c2604a9a689 ("usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/linux-usb/20230307132120.5897c5af@deangelis.fenrir.org.uk Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-30xhci: also avoid the XHCI_ZERO_64B_REGS quirk with a passthrough iommuD Scott Phillips1-1/+5
Previously the quirk was skipped when no iommu was present. The same rationale for skipping the quirk also applies in the iommu.passthrough=1 case. Skip applying the XHCI_ZERO_64B_REGS quirk if the device's iommu domain is passthrough. Fixes: 12de0a35c996 ("xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers") Cc: stable <stable@kernel.org> Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230330143056.1390020-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29usb: xhci: tegra: fix sleep in atomic callWayne Chang1-3/+3
When we set the dual-role port to Host mode, we observed the following splat: [ 167.057718] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:229 [ 167.057872] Workqueue: events tegra_xusb_usb_phy_work [ 167.057954] Call trace: [ 167.057962] dump_backtrace+0x0/0x210 [ 167.057996] show_stack+0x30/0x50 [ 167.058020] dump_stack_lvl+0x64/0x84 [ 167.058065] dump_stack+0x14/0x34 [ 167.058100] __might_resched+0x144/0x180 [ 167.058140] __might_sleep+0x64/0xd0 [ 167.058171] slab_pre_alloc_hook.constprop.0+0xa8/0x110 [ 167.058202] __kmalloc_track_caller+0x74/0x2b0 [ 167.058233] kvasprintf+0xa4/0x190 [ 167.058261] kasprintf+0x58/0x90 [ 167.058285] tegra_xusb_find_port_node.isra.0+0x58/0xd0 [ 167.058334] tegra_xusb_find_port+0x38/0xa0 [ 167.058380] tegra_xusb_padctl_get_usb3_companion+0x38/0xd0 [ 167.058430] tegra_xhci_id_notify+0x8c/0x1e0 [ 167.058473] notifier_call_chain+0x88/0x100 [ 167.058506] atomic_notifier_call_chain+0x44/0x70 [ 167.058537] tegra_xusb_usb_phy_work+0x60/0xd0 [ 167.058581] process_one_work+0x1dc/0x4c0 [ 167.058618] worker_thread+0x54/0x410 [ 167.058650] kthread+0x188/0x1b0 [ 167.058672] ret_from_fork+0x10/0x20 The function tegra_xusb_padctl_get_usb3_companion eventually calls tegra_xusb_find_port and this in turn calls kasprintf which might sleep and so cannot be called from an atomic context. Fix this by moving the call to tegra_xusb_padctl_get_usb3_companion to the tegra_xhci_id_work function where it is really needed. Fixes: f836e7843036 ("usb: xhci-tegra: Add OTG support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang <waynec@nvidia.com> Signed-off-by: Haotien Hsu <haotienh@nvidia.com> Link: https://lore.kernel.org/r/20230327095548.1599470-1-haotienh@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29usb: pci-quirks: Reduce the length of a spinlock section in ↵Christophe JAILLET1-3/+1
usb_amd_find_chipset_info() 'info' is local to the function. There is no need to zeroing it within a spin_lock section. Moreover, there is no need to explicitly initialize the .need_pll_quirk field. Initialize the structure when defined and remove the now useless memset(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/08ee42fced6af6bd56892cd14f2464380ab071fa.1679600396.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionalsArnd Bergmann1-11/+5
A recent patch caused an unused-function warning in builds with CONFIG_PM disabled, after the function became marked 'static': drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function] 91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) | ^~~~~~~~~~~~~~~~~~~ This could be solved by adding another #ifdef, but as there is a trend towards removing CONFIG_PM checks in favor of helper macros, do the same conversion here and use pm_ptr() to get either a function pointer or NULL but avoid the warning. As the hidden functions reference some other symbols, make sure those are visible at compile time, at the minimal cost of a few extra bytes for 'struct usb_device'. Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Move xhci MSI sync function to to xhci-pciJosue David Hernandez Gutierrez2-25/+13
Move function to sync MSI from xhci.c to xhci-pci.c to decouple PCI specific code from generic xhci code. No functional changes, function is an exact copy [commit message rewording -Mathias] Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-15-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Call MSI sync function from xhci-pci instead of generic xhci codeJosue David Hernandez Gutierrez2-5/+7
Call function to sync MSI interrupts from pci specific xhci_pci_suspend() function in xhci-pci.c instead of from generic xhci_suspend() [commit message rewording -Mathias] Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-14-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Move functions to cleanup MSI to xhci-pciJosue David Hernandez Gutierrez3-32/+26
Move function to cleanup MSI from xhci.c to xhci-pci.c This is to decouple PCI specific code from generic xhci code. No functional changes, function is an exact copy Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-13-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: move PCI specific MSI/MSIX cleanup away from generic xhci functionsJosue David Hernandez Gutierrez3-6/+18
Call the PCI specific MSI/MSIX interrupt freeing code from the xhci-pci callbacks instead of generic xhci code, decoupling PCI parts from generic xhci functions. Adds xhci_pci_stop() that overrides xhci_stop() for PCI xHC controllers. This will free MSIX interrupts a bit later in the hc_driver stop callback, but is still earlier than usb core frees "legacy" interrupts, or interrupts for other hosts. Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-12-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Move functions to setup msi to xhci-pciJosue David Hernandez Gutierrez5-135/+131
Move functions to setup msi from xhci.c to xhci-pci.c to decouple PCI specific code from generic xhci code. No functional changes, functions are an exact copy [commit message rewording -Mathias] Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-11-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: Avoid PCI MSI/MSIX interrupt reinitialization at resumeJosue David Hernandez Gutierrez3-6/+18
xhci MSI setup is currently done at the same time as xHC host is started in xhci_run(). This couples the generic xhci code with PCI, and will reconfigure MSI/MSIX interrupts every time xHC is started. Decouple MSI/MSIX configuration from generic xhci code by moving MSI/MSIX part to a PCI specific xhci_pci_run() function overriding xhci_run(). This allows us to remove unnecessay MSI/MSIX reconfiguration done every time PCI xhci resumes from suspend. i.e. remove the xhci_cleanup_msix() call from xhci_resume() and the xhci_try_enale_msi() call in xhci_run() called a bit later by xhci_resume() [minor changes and commit message rewrite -Mathias] Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-10-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: dbc: Provide sysfs option to configure dbc descriptorsMathias Nyman2-4/+191
When DbC is enabled the first port on the xHC host acts as a usb device. xHC provides the descriptors automatically when the DbC device is enumerated. Most of the values are hardcoded, but some fields such as idProduct, idVendor, bcdDevice and bInterfaceProtocol can be modified. Add sysfs entries that allow userspace to change these. User can only change them before dbc is enabled, i.e. before writing "enable" to dbc sysfs file as we don't want these values to change while device is connected, or during enumeration. Add documentation for these entries in Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-9-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: mem: Join string literals backAndy Shevchenko1-17/+10
For easy grepping on debug purposes join string literals back in the messages. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-8-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: mem: Replace explicit castings with appropriate specifiersAndy Shevchenko1-10/+7
There is no need to have explicit castings when we have specific pointer extensions. Replace the explicit castings with appropriate specifiers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: mem: Use while (i--) pattern to clean upAndy Shevchenko1-2/+1
Use more natural while (i--) patter to clean up allocated resources. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: mem: Drop useless return:sAndy Shevchenko1-7/+4
When function returns void and we have if-else-if chain, there is no need to explicitly call return. Drop them and indent lines better. While at it, make if-chain sorted from testing bigger values to smaller. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: mem: Get rid of redundant 'else'Andy Shevchenko1-8/+6
In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. While at it, make if-chain sorted from testing bigger values to smaller. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: mem: Use dma_poll_zalloc() instead of explicit memset()Andy Shevchenko1-4/+2
Use dma_poll_zalloc() instead of explicit memset() call in xhci_alloc_stream_ctx(). Note, that dma_alloc_coherent() is always issues zeroed memory chunk. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23xhci: mem: Carefully calculate size for memory allocationsAndy Shevchenko1-4/+5
Carefully calculate size for memory allocations, i.e. with help of size_mul() macro from overflow.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20230317154715.535523-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-21usb: host: u132-hcd: Delete driverUwe Kleine-König3-3267/+0
This driver got its last actual change in 2006 and is probably unused as nowbody should use a cardbus to USB adapter any more. If it were still used, the driver was in urgent need for maintainer love. (Explicit kref handling, underdocumented locking, .remove() can return errors ...) Also the link in the (now removed) help text doesn't look actively maintained. According to archive.org it forwarded to http://www.copenhagen-hotel.net/ already back in 2018. So don't waste more time on this driver and just delete it. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230321103638.343886-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-21usb: host: u132-hcd: Drop if with an always true conditionUwe Kleine-König1-32/+34
A platform device's .remove() callback is only ever called after .probe() successfully completed. After such a successful call, platform_get_drvdata() doesn't return NULL. Simplify accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230321101911.342538-3-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-21usb: host: u132-hcd: Various style improvementsUwe Kleine-König1-190/+208
- Don't break strings over two (or more) lines - Put the , separating function args at the end of line - Replace if (cond) {} else { ... } by if (!cond) { ... } - Consistently use curly braces in all blocks belonging to the same if if at least one block needs them. - Don't start a new line just for ); There are no semantic changes. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230321101911.342538-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: host: max3421-hcd: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/host/max3421-hcd.c:1943:34: error: ‘max3421_of_match_table’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230311173624.263189-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: host: xhci-rcar: drop of_match_ptr for ID tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/usb/host/xhci-rcar.c:269:34: error: ‘usb_xhci_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230311173624.263189-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: Use of_property_read_bool() for boolean propertiesRob Herring2-8/+5
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230310144729.1545857-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: Use of_property_present() for testing DT property presenceRob Herring1-2/+2
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230310144728.1545786-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: xhci: change some trace event __dynamic_array() to __get_buf()Linyu Yuan1-13/+7
some __dynamic_array() buffer will only used at trace event output time, change to __get_buf() which will allocate tempary trace seq buffer for output purpose. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/1677465850-1396-5-git-send-email-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: host: xhci-rcar: remove R-Car H3 ES1.* handlingWolfram Sang1-29/+2
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-11-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: host: xhci-rcar: remove leftover quirk handlingWolfram Sang1-3/+0
Loading V3 firmware does not need a quirk anymore, remove the leftover code. Fixes: ed8603e11124 ("usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: host: oxu210hp-hcd: Replace fake flex-array with flexible-array memberGustavo A. R. Silva1-1/+1
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Transform zero-length array into flexible-array member in struct ehci_regs. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/usb/host/oxu210hp-hcd.c:3983:30: warning: array subscript i is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] drivers/usb/host/oxu210hp-hcd.c:3986:38: warning: array subscript i is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] drivers/usb/host/oxu210hp-hcd.c:3971:30: warning: array subscript i is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] drivers/usb/host/oxu210hp-hcd.c:3978:30: warning: array subscript i is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] drivers/usb/host/oxu210hp-hcd.c:3523:30: warning: array subscript i is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] drivers/usb/host/oxu210hp-hcd.c:2774:39: warning: array subscript port is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] drivers/usb/host/oxu210hp-hcd.c:3569:35: warning: array subscript <unknown> is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] drivers/usb/host/oxu210hp-hcd.c:3888:36: warning: array subscript port is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] drivers/usb/host/oxu210hp-hcd.c:2911:45: warning: array subscript i is outside array bounds of ‘u32[0]’ {aka ‘unsigned int[]’} [-Warray-bounds=] This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/259 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/Y/gynI9Wv8RZTD8M@work Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: host: xhci-tegra: Drop using of_irq_parse_one()Rob Herring1-10/+7
Drivers generally shouldn't be using of_irq_parse_one() directly as it is a low-level interrupt parsing API. The exceptions are cases that need the values from the 'interrupts' property. This is not the case for Tegra XHCI driver as it just uses of_irq_parse_one() to test for 'interrupts' being absent or invalid. Instead, just make the interrupt optional on any error other than deferred probe. The exact reason for failing to get the interrupt is not that important. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230228235322.13289-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-24Merge tag 'phy-for-6.3' of ↵Linus Torvalds2-34/+12
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This features a bunch of new device support, a couple of new drivers, yaml conversion and updates of a few drivers. Core support: - New devm_of_phy_optional_get() API with users and conversion New hardware support: - Mediatek MT7986 phy support - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY support amd SM8350 & SM8450 combo phy support - Qualcomm SNPS eUSB2 eUSB2 repeater drivers - Allwinner F1C100s USB PHY support - Tegra xusb support for Tegra234 Updates: - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy - G4 mode support in Qualcomm UFS phy and support for various SoCs - Yaml conversion for Meson usb2 phy - TI Type C support for usb phy for j721 - Yaml conversion for Tegra xusb binding" * tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits) phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater phy: qcom: Add QCOM SNPS eUSB2 repeater driver dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property phy: rockchip-typec: Fix unsigned comparison with less than zero phy: rockchip-typec: fix tcphy_get_mode error case phy: qcom: snps-eusb2: Add missing headers phy: qcom-qmp-combo: Add support for SM8550 phy: qcom-qmp: Add v6 DP register offsets phy: qcom-qmp: pcs-usb: Add v6 register offsets dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible phy: qcom: Add QCOM SNPS eUSB2 driver dt-bindings: phy: Add qcom,snps-eusb2-phy schema file phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6 register offsets phy: qcom-qmp: pcs: Add v6.20 register offsets ...
2023-02-24Merge tag 'usb-6.3-rc1' of ↵Linus Torvalds23-640/+984
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver updates from Greg KH: "Here is the big set of USB and Thunderbolt driver changes for 6.3-rc1. Nothing major in here, just lots of good development, including: - Thunderbolt additions for new device support and features - xhci driver updates and cleanups - USB gadget media driver updates (includes media core changes that were acked by the v4l2 maintainers) - lots of other USB gadget driver updates for new features - dwc3 driver updates and fixes - minor debugfs leak fixes - typec driver updates and additions - dt-bindings conversions to yaml - other small bugfixes and driver updates All have been in linux-next for a while with no reported issues" * tag 'usb-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (237 commits) usb: dwc3: xilinx: Remove unused of_gpio,h usb: typec: pd: Add higher capability sysfs for sink PDO usb: typec: pd: Remove usb_suspend_supported sysfs from sink PDO usb: dwc3: pci: add support for the Intel Meteor Lake-M usb: gadget: u_ether: Don't warn in gether_setup_name_default() usb: gadget: u_ether: Convert prints to device prints usb: gadget: u_serial: Add null pointer check in gserial_resume usb: gadget: uvc: fix missing mutex_unlock() if kstrtou8() fails xhci: host: potential NULL dereference in xhci_generic_plat_probe() dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: make G12A usb3-phy0 optional usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_dev of: device: Do not ignore error code in of_device_uevent_modalias of: device: Ignore modalias of reused nodes usb: gadget: configfs: Fix set but not used variable warning usb: gadget: uvc: Use custom strings if available usb: gadget: uvc: Allow linking function to string descs usb: gadget: uvc: Pick up custom string descriptor IDs usb: gadget: uvc: Allow linking XUs to string descriptors usb: gadget: configfs: Attach arbitrary strings to cdev usb: gadget: configfs: Support arbitrary string descriptors ...
2023-02-20Merge tag 'arm-boardfile-remove-6.3' of ↵Linus Torvalds6-435/+7
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC boardfile updates from Arnd Bergmann "Unused boardfile removal for 6.3 This is a follow-up to the deprecation of most of the old-style board files that was merged in linux-6.0, removing them for good. This branch is almost exclusively dead code removal based on those annotations. Some device driver removals went through separate subsystem trees, but the majority is in the same branch, in order to better handle dependencies between the patches and avoid breaking bisection. Unfortunately that leads to merge conflicts against other changes in the subsystem trees, but they should all be trivial to resolve by removing the files. See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the description of which machines were marked unused and are now removed. The only removals that got postponed are Terastation WXL (mv78xx0) and Jornada720 (StrongARM1100), which turned out to still have potential users" * tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits) mmc: omap: drop TPS65010 dependency ARM: pxa: restore mfp-pxa320.h usb: ohci-omap: avoid unused-variable warning ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs ARM: s3c: remove obsolete s3c-cpu-freq header MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal ARM: remove CONFIG_UNUSED_BOARD_FILES mfd: remove htc-pasic3 driver w1: remove ds1wm driver usb: remove ohci-tmio driver fbdev: remove w100fb driver fbdev: remove tmiofb driver mmc: remove tmio_mmc driver mfd: remove ucb1400 support mfd: remove toshiba tmio drivers rtc: remove v3020 driver power: remove pda_power supply driver ASoC: pxa: remove unused board support pcmcia: remove unused pxa/sa1100 drivers ...
2023-02-14xhci: host: potential NULL dereference in xhci_generic_plat_probe()Dan Carpenter1-0/+3
It's possible to exit the loop with "sysdev" set to NULL. In that case we should use "&pdev->dev". Fixes: ec5499d338ec ("xhci: split out rcar/rz support from xhci-plat.c") Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/Y+T4kTcJwRwxNHJq@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-09usb: host: fsl-mph-dr-of: reuse device_set_of_node_from_devAlexander Stein1-2/+1
This sets both of_node fields and takes a of_node reference as well. Fixes: bb160ee61c04 ("drivers/usb/host/ehci-fsl: Fix interrupt setup in host mode.") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230207110531.1060252-4-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-07usb: max-3421: Fix setting of I/O pinsMark Tomlinson1-1/+1
To update the I/O pins, the registers are read/modified/written. The read operation incorrectly always read the first register. Although wrong, there wasn't any impact as all the output pins are always written, and the inputs are read only anyway. Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20230207033337.18112-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06usb: host: xhci: mvebu: Iterate over array indexes instead of using pointer mathKees Cook1-1/+1
Walking the dram->cs array was seen as accesses beyond the first array item by the compiler. Instead, use the array index directly. This allows for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen with GCC 13 with -fstrict-flex-arrays: In function 'xhci_mvebu_mbus_config', inlined from 'xhci_mvebu_mbus_init_quirk' at ../drivers/usb/host/xhci-mvebu.c:66:2: ../drivers/usb/host/xhci-mvebu.c:37:28: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=] 37 | writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | | ~~^~~~~~ Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230204183651.never.663-kees@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06USB: isp1362: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman1-1/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20230202153235.2412790-7-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06USB: isp116x: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman1-1/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Olav Kongas <ok@artecdesign.ee> Link: https://lore.kernel.org/r/20230202153235.2412790-6-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06USB: sl811: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman1-1/+1
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20230202153235.2412790-4-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06USB: uhci: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman1-3/+3
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230202153235.2412790-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-03usb: remove the dead USB_OHCI_SH optionChristoph Hellwig1-11/+0
USB_OHCI_SH is a dummy option that never builds any code, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230113062339.1909087-3-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-03usb: host: ohci-exynos: Convert to devm_of_phy_optional_get()Geert Uytterhoeven1-17/+6
Use the new devm_of_phy_optional_get() helper instead of open-coding the same operation. As devm_of_phy_optional_get() returns NULL if either the PHY cannot be found, or if support for the PHY framework is not enabled, it is no longer needed to check for -ENODEV or -ENOSYS. This lets us drop several checks for IS_ERR(), as phy_power_{on,off}() handle NULL parameters fine. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/3adc5dd1149a17ea7daf4463549feab886c6b145.1674584626.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.