aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2
AgeCommit message (Collapse)AuthorFilesLines
2024-04-23Merge 6.9-rc5 into usb-nextGreg Kroah-Hartman1-1/+3
We need the usb/thunderbolt fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09usb: dwc2: host: Fix dereference issue in DDMA completion flow.Minas Harutyunyan1-1/+3
Fixed variable dereference issue in DDMA completion flow. Fixes: b258e4268850 ("usb: dwc2: host: Fix ISOC flow in DDMA mode") CC: stable@vger.kernel.org Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-usb/2024040834-ethically-rumble-701f@gregkh/T/#m4c4b83bef0ebb4b67fe2e0a7d6466cbb6f416e39 Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/cc826d3ef53c934d8e6d98870f17f3cdc3d2755d.1712665387.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-01Merge 6.9-rc2 into usb-nextGreg Kroah-Hartman7-41/+125
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-27usb: dwc2: add support for Sophgo CV18XX/SG200X series SoCInochi Amaoto1-0/+21
Add params for DWC2 IP in Sophgo CV18XX/SG200X series SoC. Signed-off-by: Inochi Amaoto <inochiama@outlook.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/IA1PR20MB4953EE73DD36D5FFC81D90EDBB352@IA1PR20MB4953.namprd20.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: gadget: LPM flow fixMinas Harutyunyan3-21/+47
Added functionality to exit from L1 state by device initiation using remote wakeup signaling, in case when function driver queuing request while core in L1 state. Fixes: 273d576c4d41 ("usb: dwc2: gadget: Add functionality to exit from LPM L1 state") Fixes: 88b02f2cb1e1 ("usb: dwc2: Add core state checking") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/b4d9de5382375dddbf7ef6049d9a82066ad87d5d.1710166393.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: gadget: Fix exiting from clock gatingMinas Harutyunyan4-5/+14
Added exiting from the clock gating mode on USB Reset Detect interrupt if core in the clock gating mode. Added new condition to check core in clock gating mode or no. Fixes: 9b4965d77e11 ("usb: dwc2: Add exit clock gating from session request interrupt") Fixes: 5d240efddc7f ("usb: dwc2: Add exit clock gating from wakeup interrupt") Fixes: 16c729f90bdf ("usb: dwc2: Allow exit clock gating in urb enqueue") Fixes: 401411bbc4e6 ("usb: dwc2: Add exit clock gating before removing driver") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/cbcc2ccd37e89e339130797ed68ae4597db773ac.1708938774.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: host: Fix ISOC flow in DDMA modeMinas Harutyunyan3-9/+22
Fixed ISOC completion flow in DDMA mode. Added isoc descriptor actual length value and update urb's start_frame value. Fixed initialization of ISOC DMA descriptors flow. Fixes: 56f5b1cff22a ("staging: Core files for the DWC2 driver") Fixes: 20f2eb9c4cf8 ("staging: dwc2: add microframe scheduler from downstream Pi kernel") Fixes: c17b337c1ea4 ("usb: dwc2: host: program descriptor for next frame") Fixes: dc4c76e7b22c ("staging: HCD descriptor DMA support for the DWC2 driver") Fixes: 762d3a1a9cd7 ("usb: dwc2: host: process all completed urbs") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/a8b1e1711cc6cabfb45d92ede12e35445c66f06c.1708944698.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: host: Fix remote wakeup from hibernationMinas Harutyunyan2-4/+14
Starting from core v4.30a changed order of programming GPWRDN_PMUACTV to 0 in case of exit from hibernation on remote wakeup signaling from device. Fixes: c5c403dc4336 ("usb: dwc2: Add host/device hibernation functions") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/99385ec55ce73445b6fbd0f471c9bd40eb1c9b9e.1708939799.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: host: Fix hibernation flowMinas Harutyunyan2-2/+28
Added to backup/restore registers HFLBADDR, HCCHARi, HCSPLTi, HCTSIZi, HCDMAi and HCDMABi. Fixes: 58e52ff6a6c3 ("usb: dwc2: Move register save and restore functions") Fixes: d17ee77b3044 ("usb: dwc2: add controller hibernation support") CC: stable@vger.kernel.org Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/c2d10ee6098b9b009a8e94191e046004747d3bdd.1708945444.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: New bitfield definition and programming in GRSTCTLMinas Harutyunyan2-0/+48
Added new bitfield GRSTCTL_CLOCK_SWITH_TIMER in GRSTCTL register. This bitfield applicable HSOTG cores v5.00 or higher and not applicable to HS/FS IOT devices. This bitfield must be programmed to 3'b010 if core will be used in Low-speed and core configured for any HS/FS PHY interface. This bitfield must be programmed to 3'b111 if core configured to use either: - HS PHY interface UTMI or ULPI - FS PHY any interface Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/0616838cfee958774c9321c6eeeda4be92f900d8.1708948356.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: Add hibernation updates for ULPI PHYMinas Harutyunyan4-0/+43
Added programmming of ULPI_LATCH_EN_DURING_HIB_ENTRY bit in GPWRDN register when using ULPI PHY during entry/exit to/from hibernation. This bit set to 1 during entering to hibernation if ULPI PHY used. On exiting from hibernation this bit reset to 0. Applicable for both host and device modes. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/e024cb39a7177ec201c873df25ca6365f2e55947.1708948356.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: New bit definition in GPWRDN registerMinas Harutyunyan1-0/+2
Added new bit ULPI_LATCH_EN_DURING_HIB_ENTRY in GPWRDN register. This bit applicable HSOTG cores v5.00 or higher. Affects Hibernation Entry and Exit sequence (for both Host and Device) when using ULPI PHY. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/56d05a4f5750aaa58d8c5bab7705814942a985bd.1708948356.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: Add eUSB2 PHY disconnect flow supportMinas Harutyunyan2-4/+22
To support eUSB2 PHY disconnect flow required in Soft disconnect state set GOTGCTL_EUSB2_DISC_SUPP bit, if applicable. On Session End Detected interrupt clear PCGCTL_GATEHCLK and PCGCTL_STOPPCLK bits if eusb2_disc parameter true. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/9d50b83df693cda8c391313e90048df8dd611c04.1708948356.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: Add new parameter eusb2_discMinas Harutyunyan3-0/+29
Added new parameter eusb2_disc to list of core parameters which specify whether eUSB2 PHY disconnect support flow applicable or no. Set to false as default value and checked core version if set to true. This parameter applicable in device mode of HSOTG and HS IOT cores v5.00 or higher. Added print this parameter in show parameters of debugfs. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/e77cc4312bda797d1ddaa4351d86c65a69c8b926.1708948356.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: New bit definition in GOTGCTL registerMinas Harutyunyan1-0/+1
Added new bit EUSB2_DISC_SUPP in GOTGCTL register. This bit applicable in device mode of HSOTG and HS IOT cores v5.00 or higher. This bit used for Device Disconnect detection with eUSB2 PHY. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/21e4401895d586afa23c3fa3d3518bd4b7ebd4d5.1708948356.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: Add core new versions definitionMinas Harutyunyan1-0/+2
Added new versions definition for HSOTG core v5.00a and IOT HS device core v5.00. Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/7fc17fe275a54c8a9e00cd00ffc19e62418c1f84.1708948356.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26usb: dwc2: Remove cat_printf()Christophe JAILLET1-44/+8
cat_printf() implements the newly introduced seq_buf API. Use the latter to save some line of code. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/abf3d0361ea291468d121062207a766b0c3228f2.1710087556.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-02usb: dwc2: Disable clock gating feature on Rockchip SoCsWilliam Wu1-0/+1
The DWC2 IP on the Rockchip SoCs doesn't support clock gating. When a clock gating is enabled, system hangs. Signed-off-by: William Wu <william.wu@rock-chips.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/1703575199-23638-1-git-send-email-william.wu@rock-chips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-21USB: dwc2: write HCINT with INTMASK appliedOliver Neukum1-8/+7
dwc2_hc_n_intr() writes back INTMASK as read but evaluates it with intmask applied. In stress testing this causes spurious interrupts like this: [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length Applying INTMASK prevents this. The issue exists in all versions of the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Tested-by: Ivan Ivanov <ivan.ivanov@suse.com> Tested-by: Andrea della Porta <andrea.porta@suse.com> Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10usb: Use device_get_match_data()Rob Herring1-15/+6
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231009211356.3242037-16-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-02usb: dwc2: fix possible NULL pointer dereference caused by driver concurrencyJia-Ju Bai1-1/+1
In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue(): spin_lock_irqsave(&hsotg->lock, flags); ... if (!urb->hcpriv) { dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n"); goto out; } rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv ... out: spin_unlock_irqrestore(&hsotg->lock, flags); When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are concurrently executed, the NULL check of "urb->hcpriv" can be executed before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL pointer dereference. This possible bug is found by an experimental static analysis tool developed by myself. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported, when my tool analyzes the source code of Linux 6.5. To fix this possible bug, "urb->hcpriv = NULL" should be executed with holding the lock "hsotg->lock". After using this patch, my tool never reports the possible bug, with the kernelconfiguration allyesconfig for x86_64. Because I have no associated hardware, I cannot test the patch in runtime testing, and just verify it according to the code logic. Fixes: 33ad261aa62b ("usb: dwc2: host: spinlock urb_enqueue") Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn> Link: https://lore.kernel.org/r/20230926024404.832096-1-baijiaju@buaa.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: dwc2: add pci_device_id driver_data parse supportYinbo Zhu3-14/+40
The dwc2 driver has everything we need to run in PCI mode except for pci_device_id driver_data parse. With that to set Loongson dwc2 element and added identified as PCI_VENDOR_ID_LOONGSON and PCI_DEVICE_ID_LOONGSON_DWC2 in dwc2_pci_ids, the Loongson dwc2 controller will work. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Link: https://lore.kernel.org/r/20230815065833.3375-1-zhuyinbo@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22USB: dwc2: hande irq on dead controller correctlyOliver Neukum1-1/+3
If the controller is dead, the honest answer to the question whether it has caused an irq is: unknown As the purpose of the irq return is to trigger switching off an IRQ, the correct response if you cannot determine if your device has caused the interrupt is IRQ_HANDLED Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20230822112455.18957-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-07-25usb: Explicitly include correct DT includesRob Herring2-2/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-30usb: dwc2/platform: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230530071913.2192214-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13usb: dwc2: support dwc2 IP for Amlogic A1 SoC familyDmitry Rokosov1-0/+21
The Amlogic A1 uses dwc2 Synopsys IP as its USB peripheral (gadget) endpoint, with different DWC2 parameters when compared to previous Amlogic SoCs. Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/20230511210455.6634-2-ddrokosov@sberdevices.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13usb: dwc2: Fix some error handling pathsChristophe JAILLET1-3/+13
dwc2_driver_probe() calls dwc2_lowlevel_hw_init() which deassert some reset lines. Should an error happen in dwc2_lowlevel_hw_init() after calling reset_control_deassert() or in the probe after calling dwc2_lowlevel_hw_init(), the reset lines remain deasserted. Add some devm_add_action_or_reset() calls to re-assert the lines if needed. Update the remove function accordingly. This change is compile-tested only. Fixes: 83f8da562f8b ("usb: dwc2: Add reset control to dwc2") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/c64537b5339342bd00f7c2152b8fc23792b9f95a.1683306479.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20usb: dwc2: platform: add support for utmi optional clockFabrice Gasnier2-1/+21
Add support for the utmi clock. It's needed on STM32MP15, when using the integrated full-speed PHY. This clock is an output of USBPHYC, but HS USBPHYC is not attached as PHY in this case: Full-Speed PHY is directly managed in dwc2 glue, through GGPIO register. Typical DT when using FS PHY &usbotg_hs { compatible = "st,stm32mp15-fsotg", "snps,dwc2"; pinctrl-names = "default"; pinctrl-0 = <&usbotg_hs_pins_a &usbotg_fs_dp_dm_pins_a>; vbus-supply = <&vbus_otg>; status = "okay"; }; In this configuration, USBPHYC clock output must be defined, so it can be properly enabled as a clock provider: clocks = <&rcc USBO_K>, <&usbphyc>; clock-names = "otg", "utmi"; Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230414084137.1050487-4-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-04-20usb: dwc2: improve error handling in __dwc2_lowlevel_hw_enableFabrice Gasnier1-2/+17
Add error handling in __dwc2_lowlevel_hw_enable() that may leave the clocks and regulators enabled upon error. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230414084137.1050487-2-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-29usb: dwc2: Fix spelling mistake "schduler" -> "scheduler"Deming Wang1-1/+1
There is a spelling mistakes in dev_warn messages. Fix them. Signed-off-by: Deming Wang <wangdeming@inspur.com> Link: https://lore.kernel.org/r/20230325063832.1642-1-wangdeming@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-27Merge 6.3-rc4 into usb-nextGreg Kroah-Hartman3-21/+7
We need the USB fixes here, and the USB gadget update for future development patches to be based on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23usb: dwc2: fix a race, don't power off/on phy for dual-role modeFabrice Gasnier2-6/+3
When in dual role mode (dr_mode == USB_DR_MODE_OTG), platform probe successively basically calls: - dwc2_gadget_init() - dwc2_hcd_init() - dwc2_lowlevel_hw_disable() since recent change [1] - usb_add_gadget_udc() The PHYs (and so the clocks it may provide) shouldn't be disabled for all SoCs, in OTG mode, as the HCD part has been initialized. On STM32 this creates some weird race condition upon boot, when: - initially attached as a device, to a HOST - and there is a gadget script invoked to setup the device part. Below issue becomes systematic, as long as the gadget script isn't started by userland: the hardware PHYs (and so the clocks provided by the PHYs) remains disabled. It ends up in having an endless interrupt storm, before the watchdog resets the platform. [ 16.924163] dwc2 49000000.usb-otg: EPs: 9, dedicated fifos, 952 entries in SPRAM [ 16.962704] dwc2 49000000.usb-otg: DWC OTG Controller [ 16.966488] dwc2 49000000.usb-otg: new USB bus registered, assigned bus number 2 [ 16.974051] dwc2 49000000.usb-otg: irq 77, io mem 0x49000000 [ 17.032170] hub 2-0:1.0: USB hub found [ 17.042299] hub 2-0:1.0: 1 port detected [ 17.175408] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode [ 17.181741] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode [ 17.189303] dwc2 49000000.usb-otg: Mode Mismatch Interrupt: currently in Host mode ... The host part is also not functional, until the gadget part is configured. The HW may only be disabled for peripheral mode (original init), e.g. dr_mode == USB_DR_MODE_PERIPHERAL, until the gadget driver initializes. But when in USB_DR_MODE_OTG, the HW should remain enabled, as the HCD part is able to run, while the gadget part isn't necessarily configured. I don't fully get the of purpose the original change, that claims disabling the hardware is missing. It creates conditions on SOCs using the PHY initialization to be completely non working in OTG mode. Original change [1] should be reworked to be platform specific. [1] https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com Fixes: ade23d7b7ec5 ("usb: dwc2: power on/off phy for peripheral mode in dual-role mode") Cc: stable <stable@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20230315144433.3095859-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-23usb: dwc2: fix a devres leak in hw_enable upon suspend resumeFabrice Gasnier1-14/+2
Each time the platform goes to low power, PM suspend / resume routines call: __dwc2_lowlevel_hw_enable -> devm_add_action_or_reset(). This adds a new devres each time. This may also happen at runtime, as dwc2_lowlevel_hw_enable() can be called from udc_start(). This can be seen with tracing: - echo 1 > /sys/kernel/debug/tracing/events/dev/devres_log/enable - go to low power - cat /sys/kernel/debug/tracing/trace A new "ADD" entry is found upon each low power cycle: ... devres_log: 49000000.usb-otg ADD 82a13bba devm_action_release (8 bytes) ... devres_log: 49000000.usb-otg ADD 49889daf devm_action_release (8 bytes) ... A second issue is addressed here: - regulator_bulk_enable() is called upon each PM cycle (suspend/resume). - regulator_bulk_disable() never gets called. So the reference count for these regulators constantly increase, by one upon each low power cycle, due to missing regulator_bulk_disable() call in __dwc2_lowlevel_hw_disable(). The original fix that introduced the devm_add_action_or_reset() call, fixed an issue during probe, that happens due to other errors in dwc2_driver_probe() -> dwc2_core_reset(). Then the probe fails without disabling regulators, when dr_mode == USB_DR_MODE_PERIPHERAL. Rather fix the error path: disable all the low level hardware in the error path, by using the "hsotg->ll_hw_enabled" flag. Checking dr_mode has been introduced to avoid a dual call to dwc2_lowlevel_hw_disable(). "ll_hw_enabled" should achieve the same (and is used currently in the remove() routine). Fixes: 54c196060510 ("usb: dwc2: Always disable regulators on driver teardown") Fixes: 33a06f1300a7 ("usb: dwc2: Fix error path in gadget registration") Cc: stable <stable@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20230316084127.126084-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-16usb: Use of_property_read_bool() for boolean propertiesRob Herring1-2/+1
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230310144729.1545857-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-09usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"Ziyang Huang1-1/+2
Some boards might use USB-A female connector for USB ports, however, the port could be connected to a dual-mode USB controller, making it also behaves as a peripheral device if male-to-male cable is connected. In this case, the dts looks like this: &usb0 { status = "okay"; dr_mode = "otg"; usb-role-switch; role-switch-default-mode = "host"; }; After boot, dwc2_ovr_init() sets GOTGCTL to GOTGCTL_AVALOVAL and call dwc2_force_mode() with parameter host=false, which causes inconsistent mode - The hardware is in peripheral mode while the kernel status is in host mode. What we can do now is to call dwc2_drd_role_sw_set() to switch to device mode, and everything should work just fine now, even switching back to none(default) mode afterwards. Fixes: e14acb876985 ("usb: dwc2: drd: add role-switch-default-node support") Cc: stable <stable@kernel.org> Signed-off-by: Ziyang Huang <hzyitc@outlook.com> Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/SG2PR01MB204837BF68EDB0E343D2A375C9A59@SG2PR01MB2048.apcprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: dwc2: power on/off phy for peripheral mode in dual-role modeQuentin Schulz2-3/+6
The PHY power is handled for peripheral mode but only when the device is forced into this peripheral mode. It is missing when the device is operating in peripheral mode when dual-role mode is enabled, so let's update the condition to match this scenario. Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08usb: dwc2: disable lpm feature on Rockchip SoCsQuentin Schulz1-0/+4
LPM feature of DWC2 module integrated in Rockchip SoCs doesn't work properly or needs some additional handling, so disable it for now. Without disabling LPM feature, the USB ADB communication fail with the following error log: dwc2 ff580000.usb: new address 27 dwc2 ff580000.usb: Failed to exit L1 sleep state in 200us. dwc2 ff580000.usb: dwc2_hsotg_send_reply: cannot queue req dwc2 ff580000.usb: dwc2_hsotg_process_req_status: failed to send reply dwc2 ff580000.usb: dwc2_hsotg_enqueue_setup: failed queue (-11) dwc2 ff580000.usb: Failed to exit L1 sleep state in 200us. [diff vs vendor kernel: added lpm_clock_gating, besl and hird_threshold_en settings as seen in commit 53febc956900 ("usb: dwc2: disable Link Power Management on STM32MP15 HS OTG")] Signed-off-by: William Wu <william.wu@rock-chips.com> Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-1-36515e1092cd@theobroma-systems.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-22usb: dwc2: platform: Improve error reporting for problems during .remove()Uwe Kleine-König1-1/+1
Returning an error value in a platform driver's remove callback results in a generic error message being emitted by the driver core, but otherwise it doesn't make a difference. The device goes away anyhow. For each case where ret is non-zero the driver already emits an error message, so suppress the generic error message by returning zero unconditionally. (Side note: The return value handling was unreliable anyhow as the value returned by dwc2_exit_hibernation() was overwritten anyhow if hsotg->in_ppd was non-zero.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20221017195914.1426297-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc2: Remove redundant license textChristophe JAILLET12-360/+1
SPDX-License-Identifier have been added in commit 5fd54ace4721 ("USB: add SPDX identifiers to all remaining files in drivers/usb/") There is no point in keeping the now redundant license text. Remove it. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/030a7e187d707f8734a492cda7a6b54d459c4bb3.1662788747.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-30usb: dwc2: fix wrong order of phy_power_on and phy_initHeiner Kallweit1-4/+4
Since 1599069a62c6 ("phy: core: Warn when phy_power_on is called before phy_init") the driver complains. In my case (Amlogic SoC) the warning is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init So change the order of the two calls. The same change has to be done to the order of phy_exit() and phy_power_off(). Fixes: 09a75e857790 ("usb: dwc2: refactor common low-level hw code to platform.c") Cc: stable@vger.kernel.org Acked-by: Minas Harutyunyan <hminas@synopsys.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-24usb: dwc2: drop unexpected word "the" in the commentsJiang Jian1-1/+1
there is an unexpected word "the" in the comments that need to be dropped file: ./drivers/usb/dwc2/hcd.c line: 1002 * even and the current frame number is even the the transfer changed to: * even and the current frame number is even the transfer Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Link: https://lore.kernel.org/r/20220622103558.6647-1-jiangjian@cdjrlc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-24usb: dwc2: gadget: remove D+ pull-up while no vbus with usb-role-switchAmelie Delaunay1-1/+2
When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is cleared, whatever the vbus valid signal state is. The pull-up should not be set when vbus isn't present (this is determined by the drd controller). This patch ensures that B-Session (so Peripheral role + vbus valid signal) is valid before clearing the DCTL_SFTDISCON bit when role switch is used. Keep original behavior when usb-role-switch isn't used. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20220622160717.314580-1-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-22usb: dwc2: host: add TPL supportAmelie Delaunay1-0/+3
The Target Peripheral List (TPL) is used to identify targeted devices during Embedded Host compliance testing. The user can add "tpl-support" in the device tree to enable it. Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20220621152350.145745-5-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10usb: dwc2: Fix memory leak in dwc2_hcd_initMiaoqian Lin1-1/+1
usb_create_hcd will alloc memory for hcd, and we should call usb_put_hcd to free it when platform_get_resource() fails to prevent memory leak. goto error2 label instead error1 to fix this. Fixes: 856e6e8e0f93 ("usb: dwc2: check return value after calling platform_get_resource()") Cc: stable <stable@kernel.org> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220530085413.44068-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05usb: dwc2: gadget: don't reset gadget's driver->busMarek Szyprowski1-1/+0
UDC driver should not touch gadget's driver internals, especially it should not reset driver->bus. This wasn't harmful so far, but since commit fc274c1e9973 ("USB: gadget: Add a new bus for gadgets") gadget subsystem got it's own bus and messing with ->bus triggers the following NULL pointer dereference: dwc2 12480000.hsotg: bound driver g_ether 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: ... CPU: 0 PID: 620 Comm: modprobe Not tainted 5.18.0-rc5-next-20220504 #11862 Hardware name: Samsung Exynos (Flattened Device Tree) PC is at module_add_driver+0x44/0xe8 LR is at sysfs_do_create_link_sd+0x84/0xe0 ... Process modprobe (pid: 620, stack limit = 0x(ptrval)) ... module_add_driver from bus_add_driver+0xf4/0x1e4 bus_add_driver from driver_register+0x78/0x10c driver_register from usb_gadget_register_driver_owner+0x40/0xb4 usb_gadget_register_driver_owner from do_one_initcall+0x44/0x1e0 do_one_initcall from do_init_module+0x44/0x1c8 do_init_module from load_module+0x19b8/0x1b9c load_module from sys_finit_module+0xdc/0xfc sys_finit_module from ret_fast_syscall+0x0/0x54 Exception stack(0xf1771fa8 to 0xf1771ff0) ... dwc2 12480000.hsotg: new device is high-speed ---[ end trace 0000000000000000 ]--- Fix this by removing driver->bus entry reset. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20220505104618.22729-1-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-21USB: dwc2: Add OTG support for Ingenic SoCs.周琰杰 (Zhou Yanjie)3-1/+63
Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000 SoC, the X1600 SoC, the X1700 SoC, the X1830 SoC, and the X2000 SoC from Ingenic. Introduce support for disable Ingenic overcurrent detection, once selected, it enables the GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to disable the VBUS overcurrent detection. This patch is derived from Dragan Čečavac (in the kernel 3.18.3 tree of CI20). It is very useful for the MIPS Creator CI20 (r1). Without this patch, OTG port of CI20 has a great probability to face overcurrent warning, which breaks the OTG functionality. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Dragan Čečavac <dragancecavac@yahoo.com> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Link: https://lore.kernel.org/r/1649964337-114337-3-git-send-email-zhouyanjie@wanyeetech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28Merge 5.17-rc6 into usb-nextGreg Kroah-Hartman2-2/+6
We need the USB fixes in here, and it resolves a merge conflict in: drivers/usb/dwc3/dwc3-pci.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17usb: dwc2: drd: fix soft connect when gadget is unconfiguredFabrice Gasnier2-2/+6
When the gadget driver hasn't been (yet) configured, and the cable is connected to a HOST, the SFTDISCON gets cleared unconditionally, so the HOST tries to enumerate it. At the host side, this can result in a stuck USB port or worse. When getting lucky, some dmesg can be observed at the host side: new high-speed USB device number ... device descriptor read/64, error -110 Fix it in drd, by checking the enabled flag before calling dwc2_hsotg_core_connect(). It will be called later, once configured, by the normal flow: - udc_bind_to_driver - usb_gadget_connect - dwc2_hsotg_pullup - dwc2_hsotg_core_connect Fixes: 17f934024e84 ("usb: dwc2: override PHY input signals with usb role switch support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/1644999135-13478-1-git-send-email-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-11usb: dwc2: Add platform specific data for Intel's AgilexDinh Nguyen1-0/+10
The DWC2 IP on the Agilex platform does not support clock-gating. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20220125161821.1951906-2-dinguyen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-26usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspendAmelie Delaunay1-1/+1
Calling dwc2_hsotg_ep_disable on ep0 (in/out) will lead to the following logs before returning -EINVAL: dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0 dwc2 49000000.usb-otg: dwc2_hsotg_ep_disable: called for ep0 To avoid these two logs while suspending, start disabling the endpoint from the index 1, as done in dwc2_hsotg_udc_stop: /* all endpoints should be shutdown */ for (ep = 1; ep < hsotg->num_of_eps; ep++) { if (hsotg->eps_in[ep]) dwc2_hsotg_ep_disable_lock(&hsotg->eps_in[ep]->ep); if (hsotg->eps_out[ep]) dwc2_hsotg_ep_disable_lock(&hsotg->eps_out[ep]->ep); } Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211207130101.270314-1-amelie.delaunay@foss.st.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Powered by cgit, Gruvboxed by Blaster4385.