aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/cdns3
AgeCommit message (Collapse)AuthorFilesLines
2019-10-10usb: cdns3: gadget: Fix full-speed modeRoger Quadros1-0/+1
We need to disable USB3 PHY for full-speed mode else gadget mode is broken. Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Sekhar Nori <[email protected]> Reviewed-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-10-07usb:cdns3: Fix for CV CH9 running with g_zero driver.Pawel Laszczak1-2/+8
Patch fixes issue with Halt Endnpoint Test observed during using g_zero driver as DUT. Bug occurred only on some testing board. Endpoint can defer transition to Halted state if endpoint has pending requests. Patch add additional condition that allows to return correct endpoint status during Get Endpoint Status request even if the halting endpoint is in progress. Reported-by: Rahul Kumar <[email protected]> Signed-off-by: Rahul Kumar <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Tested-by: Roger Quadros <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-10-04usb: cdns3: Fix sheduling with locks held.Pawel Laszczak1-1/+1
Patch fix issue in cdns3_ep0_feature_handle_device function. The function usleep_range can't be used there because this function is called with locks held and IRQs disabled in cdns3_device_thread_irq_handler(). To resolve this issue patch replaces usleep_range with mdelay. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Reviewed-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-10-04usb: cdns3: Fix use after free in probe error handlingDan Carpenter1-1/+2
We can't use "wrap" after it has been freed. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20190904100102.GB7007@mwanda Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-09-03usb: cdns3: Remove redundant dev_err call in cdns3_probe()Wei Yongjun1-3/+1
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-09-03usb: cdns3: fix spelling mistake: "cnfiguration" -> "configuration"Colin Ian King1-1/+1
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-09-03usb: cdns3: fix missing assignment of ret before error check on retColin Ian King1-3/+3
Currently the check on a non-zero return code in ret is false because ret has been initialized to zero. I believe that ret should be assigned to the return from the call to readl_poll_timeout_atomic before the check on ret. Since ret is being re-assinged the original initialization of ret to zero can be removed. Addresses-Coverity: ("'Constant' variable guards dead code") Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-09-03usb: cdns3: remove redundant assignment to ret on error exit pathColin Ian King1-3/+1
In the case where an allocation fails for priv_ep ret is assigned -ENOMEM and the code exits via the exit path 'err'. The exit path returns -ENOMEM without using variable ret, so the assingment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-09-03usb: cdns3: remove set but not used variable 'priv_dev'YueHaibing1-5/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/usb/cdns3/gadget.c: In function '__cdns3_gadget_init': drivers/usb/cdns3/gadget.c:2665:23: warning: variable 'priv_dev' set but not used [-Wunused-but-set-variable] drivers/usb/cdns3/gadget.c: In function cdns3_start_all_request: drivers/usb/cdns3/gadget.c:357:24: warning: variable priv_req set but not used [-Wunused-but-set-variable] They are never used, so can be removed. Reported-by: Hulk Robot <[email protected]> Signed-off-by: YueHaibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-09-03usb: cdns3: Fix Wunused-but-set-variable warningYueHaibing1-3/+1
drivers/usb/cdns3/ep0.c: In function cdns3_ep0_feature_handle_device: drivers/usb/cdns3/ep0.c:290:6: warning: variable wIndex set but not used [-Wunused-but-set-variable] drivers/usb/cdns3/ep0.c:289:6: warning: variable wValue set but not used [-Wunused-but-set-variable] wIndex is never used, so remove it. wValue should be use in the switch statement. Reported-by: Hulk Robot <[email protected]> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: YueHaibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-08-29usb:cdns3 Fix for stuck packets in on-chip OUT buffer.Pawel Laszczak2-2/+350
Controller for OUT endpoints has shared on-chip buffers for all incoming packets, including ep0out. It's FIFO buffer, so packets must be handled by DMA in correct order. If the first packet in the buffer will not be handled, then the following packets directed for other endpoints and functions will be blocked. Additionally the packets directed to one endpoint can block entire on-chip buffers. In this case transfer to other endpoints also will blocked. To resolve this issue after raising the descriptor missing interrupt driver prepares internal usb_request object and use it to arm DMA transfer. The problematic situation was observed in case when endpoint has been enabled but no usb_request were queued. Driver try detects such endpoints and will use this workaround only for these endpoint. Driver use limited number of buffer. This number can be set by macro CDNS_WA2_NUM_BUFFERS. Such blocking situation was observed on ACM gadget. For this function host send OUT data packet but ACM function is not prepared for this packet. It's cause that buffer placed in on chip memory block transfer to other endpoints. Issue has been fixed for DEV_VER_V2 version of controller. Signed-off-by: Pawel Laszczak <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2019-08-29usb: cdns3: Add Cadence USB3 DRD DriverPawel Laszczak16-0/+6988
This patch introduce new Cadence USBSS DRD driver to Linux kernel. The Cadence USBSS DRD Controller is a highly configurable IP Core which can be instantiated as Dual-Role Device (DRD), Peripheral Only and Host Only (XHCI)configurations. The current driver has been validated with FPGA platform. We have support for PCIe bus, which is used on FPGA prototyping. The host side of USBSS-DRD controller is compliant with XHCI specification, so it works with standard XHCI Linux driver. Signed-off-by: Pawel Laszczak <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.