aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2020-05-11Merge 5.7-rc5 into tty-nextGreg Kroah-Hartman5-7/+11
We need the tty fixes in here too. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-08serial: 8250_pci: Move Pericom IDs to pci_ids.hKai-Heng Feng1-6/+0
Move the IDs to pci_ids.h so it can be used by next patch. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Cc: [email protected]
2020-05-08Merge tag 'tty-5.7-rc5' of ↵Linus Torvalds3-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are three small TTY/Serial/VT fixes for 5.7-rc5: - revert for the bcm63xx driver "fix" that was incorrect - vt unicode console bugfix - xilinx_uartps console driver fix All of these have been in linux next with no reported issues" * tag 'tty-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: xilinx_uartps: Fix missing id assignment to the console vt: fix unicode console freeing with a common interface Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"
2020-05-06serial: samsung: 32-bit access for TX/RX hold registersHyunki Koo1-5/+57
Support 32-bit access for the TX/RX hold registers UTXH and URXH. This is required for some newer SoCs. Signed-off-by: Hyunki Koo <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Tested on Odroid HC1 (Exynos5422): Tested-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-06serial: samsung: Replace rd_regb/wr_regb with rd_reg/wr_regHyunki Koo1-9/+9
This patch change the name of macro for general usage. Signed-off-by: Hyunki Koo <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Tested on Odroid HC1 (Exynos5422): Tested-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-06Revert "tty: serial: qcom_geni_serial: Use OPP API to set clk/perf state"Greg Kroah-Hartman1-29/+5
This reverts commit 3d9231e69831551da3a78a618b31702ea4dedd5e Rajendra writes: Greg, there are other patches in the series which have a dependency on this patch [1] would it be possible for you to drop this patch and instead ack it so it can be taken via the msm tree? So dropping it from here. Reported-by: Rajendra Nayak <[email protected]> Cc: Matthias Kaehlcke <[email protected]> Cc: Akash Asthana <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-05serial: amba-pl011: Make sure we initialize the port.lock spinlockJohn Stultz1-0/+1
Valentine reported seeing: [ 3.626638] INFO: trying to register non-static key. [ 3.626639] the code is fine but needs lockdep annotation. [ 3.626640] turning off the locking correctness validator. [ 3.626644] CPU: 7 PID: 51 Comm: kworker/7:1 Not tainted 5.7.0-rc2-00115-g8c2e9790f196 #116 [ 3.626646] Hardware name: HiKey960 (DT) [ 3.626656] Workqueue: events deferred_probe_work_func [ 3.632476] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes) [ 3.640220] Call trace: [ 3.640225] dump_backtrace+0x0/0x1b8 [ 3.640227] show_stack+0x20/0x30 [ 3.640230] dump_stack+0xec/0x158 [ 3.640234] register_lock_class+0x598/0x5c0 [ 3.640235] __lock_acquire+0x80/0x16c0 [ 3.640236] lock_acquire+0xf4/0x4a0 [ 3.640241] _raw_spin_lock_irqsave+0x70/0xa8 [ 3.640245] uart_add_one_port+0x388/0x4b8 [ 3.640248] pl011_register_port+0x70/0xf0 [ 3.640250] pl011_probe+0x184/0x1b8 [ 3.640254] amba_probe+0xdc/0x180 [ 3.640256] really_probe+0xe0/0x338 [ 3.640257] driver_probe_device+0x60/0xf8 [ 3.640259] __device_attach_driver+0x8c/0xd0 [ 3.640260] bus_for_each_drv+0x84/0xd8 [ 3.640261] __device_attach+0xe4/0x140 [ 3.640263] device_initial_probe+0x1c/0x28 [ 3.640265] bus_probe_device+0xa4/0xb0 [ 3.640266] deferred_probe_work_func+0x7c/0xb8 [ 3.640269] process_one_work+0x2c0/0x768 [ 3.640271] worker_thread+0x4c/0x498 [ 3.640272] kthread+0x14c/0x158 [ 3.640275] ret_from_fork+0x10/0x1c Which seems to be due to the fact that after allocating the uap structure, nothing initializes the spinlock. Its a little confusing, as uart_port_spin_lock_init() is one place where the lock is supposed to be initialized, but it has an exception for the case where the port is a console. This makes it seem like a deeper fix is needed to properly register the console, but I'm not sure what that entails, and Andy suggested that this approach is less invasive. Thus, this patch resolves the issue by initializing the spinlock in the driver, and resolves the resulting warning. Cc: Andy Shevchenko <[email protected]> Cc: Russell King <[email protected]> Cc: Jiri Slaby <[email protected]> Cc: [email protected] Reported-by: Valentin Schneider <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: John Stultz <[email protected]> Reviewed-and-tested-by: Valentin Schneider <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-05tty: serial: qcom_geni_serial: Use OPP API to set clk/perf stateRajendra Nayak1-5/+29
geni serial needs to express a perforamnce state requirement on CX powerdomain depending on the frequency of the clock rates. Use OPP table from DT to register with OPP framework and use dev_pm_opp_set_rate() to set the clk/perf state. Signed-off-by: Rajendra Nayak <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Akash Asthana <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-05serial: lantiq: Add x86 in Kconfig dependencies for Lantiq serial driverRahul Tanwar1-1/+1
Lantiq serial driver/IP is reused for a x86 based SoC as well. Update the Kconfig accordingly. Signed-off-by: Rahul Tanwar <[email protected]> Link: https://lore.kernel.org/r/96fd193c0a8939d27641ff93573545c02313048f.1588577002.git.rahul.tanwar@linux.intel.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-04tty: xilinx_uartps: Fix missing id assignment to the consoleShubhrajyoti Datta1-0/+1
When serial console has been assigned to ttyPS1 (which is serial1 alias) console index is not updated property and pointing to index -1 (statically initialized) which ends up in situation where nothing has been printed on the port. The commit 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"") didn't contain this line which was removed by accident. Fixes: 18cc7ac8a28e ("Revert "serial: uartps: Register own uart console and driver structures"") Signed-off-by: Shubhrajyoti Datta <[email protected]> Cc: stable <[email protected]> Signed-off-by: Michal Simek <[email protected]> Link: https://lore.kernel.org/r/ed3111533ef5bd342ee5ec504812240b870f0853.1588602446.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-04vt: fix unicode console freeing with a common interfaceNicolas Pitre1-2/+7
By directly using kfree() in different places we risk missing one if it is switched to using vfree(), especially if the corresponding vmalloc() is hidden away within a common abstraction. Oh wait, that's exactly what happened here. So let's fix this by creating a common abstraction for the free case as well. Signed-off-by: Nicolas Pitre <[email protected]> Reported-by: [email protected] Fixes: 9a98e7a80f95 ("vt: don't use kmalloc() for the unicode screen buffer") Cc: <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-04Revert "tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart"Florian Fainelli1-3/+1
This reverts commit 580d952e44de5509c69c8f9346180ecaa78ebeec ("tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") because we should not be doing a clk_put() if we were not successful in getting a valid clock reference via clk_get() in the first place. Fixes: 580d952e44de ("tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart") Signed-off-by: Florian Fainelli <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-29Merge tag 'riscv-for-linus-5.7-rc4' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes. Specifically: - fix linker argument to allow linking with lld - build fix for configurations without a frame pointer - a handful of build fixes related the SBI 0.1 vs 0.2 split - remove STRICT_KERNEL_RWX for !MMU, which isn't useful" * tag 'riscv-for-linus-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: select ARCH_HAS_STRICT_KERNEL_RWX only if MMU riscv: sbi: Fix undefined reference to sbi_shutdown tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBI riscv: sbi: Correct sbi_shutdown() and sbi_clear_ipi() export riscv: fix vdso build with lld RISC-V: stacktrace: Declare sp_in_global outside ifdef
2020-04-28tty: hvc: Fix data abort due to race in hvc_openRaghavendra Rao Ananta1-2/+14
Potentially, hvc_open() can be called in parallel when two tasks calls open() on /dev/hvcX. In such a scenario, if the hp->ops->notifier_add() callback in the function fails, where it sets the tty->driver_data to NULL, the parallel hvc_open() can see this NULL and cause a memory abort. Hence, serialize hvc_open and check if tty->private_data is NULL before proceeding ahead. The issue can be easily reproduced by launching two tasks simultaneously that does nothing but open() and close() on /dev/hvcX. For example: $ ./simple_open_close /dev/hvc0 & ./simple_open_close /dev/hvc0 & Signed-off-by: Raghavendra Rao Ananta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-28sparc64: vcc: Fix error return code in vcc_probe()Wei Yongjun1-0/+1
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-27Merge 5.7-rc3 into tty-nextGreg Kroah-Hartman9-189/+106
We need the tty/serial fixes in here too. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23tty: hvc: fix buffer overflow during hvc_alloc().Andrew Melnychenko1-9/+14
If there is a lot(more then 16) of virtio-console devices or virtio_console module is reloaded - buffers 'vtermnos' and 'cons_ops' are overflowed. In older kernels it overruns spinlock which leads to kernel freezing: https://bugzilla.redhat.com/show_bug.cgi?id=1786239 To reproduce the issue, you can try simple script that loads/unloads module. Something like this: while [ 1 ] do modprobe virtio_console sleep 2 modprobe -r virtio_console sleep 2 done Description of problem: Guest get 'Call Trace' when loading module "virtio_console" and unloading it frequently - clearly reproduced on kernel-4.18.0: [ 81.498208] ------------[ cut here ]------------ [ 81.499263] pvqspinlock: lock 0xffffffff92080020 has corrupted value 0xc0774ca0! [ 81.501000] WARNING: CPU: 0 PID: 785 at kernel/locking/qspinlock_paravirt.h:500 __pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.503173] Modules linked in: virtio_console fuse xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nft_objref nf_conntrack_tftp tun bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nf_tables_set nft_chain_nat_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 nft_chain_route_ipv6 nft_chain_nat_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack nft_chain_route_ipv4 ip6_tables nft_compat ip_set nf_tables nfnetlink sunrpc bochs_drm drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm i2c_piix4 pcspkr crct10dif_pclmul crc32_pclmul joydev ghash_clmulni_intel ip_tables xfs libcrc32c sd_mod sg ata_generic ata_piix virtio_net libata crc32c_intel net_failover failover serio_raw virtio_scsi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: virtio_console] [ 81.517019] CPU: 0 PID: 785 Comm: kworker/0:2 Kdump: loaded Not tainted 4.18.0-167.el8.x86_64 #1 [ 81.518639] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 81.520205] Workqueue: events control_work_handler [virtio_console] [ 81.521354] RIP: 0010:__pv_queued_spin_unlock_slowpath+0xc0/0xd0 [ 81.522450] Code: 07 00 48 63 7a 10 e8 bf 64 f5 ff 66 90 c3 8b 05 e6 cf d6 01 85 c0 74 01 c3 8b 17 48 89 fe 48 c7 c7 38 4b 29 91 e8 3a 6c fa ff <0f> 0b c3 0f 0b 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 [ 81.525830] RSP: 0018:ffffb51a01ffbd70 EFLAGS: 00010282 [ 81.526798] RAX: 0000000000000000 RBX: 0000000000000010 RCX: 0000000000000000 [ 81.528110] RDX: ffff9e66f1826480 RSI: ffff9e66f1816a08 RDI: ffff9e66f1816a08 [ 81.529437] RBP: ffffffff9153ff10 R08: 000000000000026c R09: 0000000000000053 [ 81.530732] R10: 0000000000000000 R11: ffffb51a01ffbc18 R12: ffff9e66cd682200 [ 81.532133] R13: ffffffff9153ff10 R14: ffff9e6685569500 R15: ffff9e66cd682000 [ 81.533442] FS: 0000000000000000(0000) GS:ffff9e66f1800000(0000) knlGS:0000000000000000 [ 81.534914] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.535971] CR2: 00005624c55b14d0 CR3: 00000003a023c000 CR4: 00000000003406f0 [ 81.537283] Call Trace: [ 81.537763] __raw_callee_save___pv_queued_spin_unlock_slowpath+0x11/0x20 [ 81.539011] .slowpath+0x9/0xe [ 81.539585] hvc_alloc+0x25e/0x300 [ 81.540237] init_port_console+0x28/0x100 [virtio_console] [ 81.541251] handle_control_message.constprop.27+0x1c4/0x310 [virtio_console] [ 81.542546] control_work_handler+0x70/0x10c [virtio_console] [ 81.543601] process_one_work+0x1a7/0x3b0 [ 81.544356] worker_thread+0x30/0x390 [ 81.545025] ? create_worker+0x1a0/0x1a0 [ 81.545749] kthread+0x112/0x130 [ 81.546358] ? kthread_flush_work_fn+0x10/0x10 [ 81.547183] ret_from_fork+0x22/0x40 [ 81.547842] ---[ end trace aa97649bd16c8655 ]--- [ 83.546539] general protection fault: 0000 [#1] SMP NOPTI [ 83.547422] CPU: 5 PID: 3225 Comm: modprobe Kdump: loaded Tainted: G W --------- - - 4.18.0-167.el8.x86_64 #1 [ 83.549191] Hardware name: Red Hat KVM, BIOS 1.12.0-5.scrmod+el8.2.0+5159+d8aa4d83 04/01/2014 [ 83.550544] RIP: 0010:__pv_queued_spin_lock_slowpath+0x19a/0x2a0 [ 83.551504] Code: c4 c1 ea 12 41 be 01 00 00 00 4c 8d 6d 14 41 83 e4 03 8d 42 ff 49 c1 e4 05 48 98 49 81 c4 40 a5 02 00 4c 03 24 c5 60 48 34 91 <49> 89 2c 24 b8 00 80 00 00 eb 15 84 c0 75 0a 41 0f b6 54 24 14 84 [ 83.554449] RSP: 0018:ffffb51a0323fdb0 EFLAGS: 00010202 [ 83.555290] RAX: 000000000000301c RBX: ffffffff92080020 RCX: 0000000000000001 [ 83.556426] RDX: 000000000000301d RSI: 0000000000000000 RDI: 0000000000000000 [ 83.557556] RBP: ffff9e66f196a540 R08: 000000000000028a R09: ffff9e66d2757788 [ 83.558688] R10: 0000000000000000 R11: 0000000000000000 R12: 646e61725f770b07 [ 83.559821] R13: ffff9e66f196a554 R14: 0000000000000001 R15: 0000000000180000 [ 83.560958] FS: 00007fd5032e8740(0000) GS:ffff9e66f1940000(0000) knlGS:0000000000000000 [ 83.562233] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 83.563149] CR2: 00007fd5022b0da0 CR3: 000000038c334000 CR4: 00000000003406e0 Signed-off-by: Andrew Melnychenko <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23tty: hvc: remove hvcs_driver_stringJason Yan1-2/+0
No users of hvcs_driver_string, remove it. This fixes the following gcc warning: drivers/tty/hvc/hvcs.c:199:19: warning: ‘hvcs_driver_string’ defined but not used [-Wunused-const-variable=] static const char hvcs_driver_string[] ^~~~~~~~~~~~~~~~~~ Reported-by: Hulk Robot <[email protected]> Signed-off-by: Jason Yan <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23serial: fsl_lpuart: Change DMA failure messages to debug levelFabio Estevam1-6/+6
Currently the following messages are seen when booting i.MX8QXP: fsl-lpuart 5a060000.serial: DMA tx channel request failed, operating without tx DMA (-19) fsl-lpuart 5a060000.serial: DMA rx channel request failed, operating without rx DMA (-19) It is not really useful to have such messages on every boot, so change them to debug level instead. Signed-off-by: Fabio Estevam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23tty: rocket, remove unneeded variableJiri Slaby1-6/+4
num_chan in register_PCI is used only as an alias for ports_per_aiop. So drop num_chan and use ports_per_aiop directly. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23tty: rocket, avoid OOB accessJiri Slaby1-11/+14
init_r_port can access pc104 array out of bounds. pc104 is a 2D array defined to have 4 members. Each member has 8 submembers. * we can have more than 4 (PCI) boards, i.e. [board] can be OOB * line is not modulo-ed by anything, so the first line on the second board can be 4, on the 3rd 12 or alike (depending on previously registered boards). It's zero only on the first line of the first board. So even [line] can be OOB, quite soon (with the 2nd registered board already). This code is broken for ages, so just avoid the OOB accesses and don't try to fix it as we would need to find out the correct line number. Use the default: RS232, if we are out. Generally, if anyone needs to set the interface types, a module parameter is past the last thing that should be used for this purpose. The parameters' description says it's for ISA cards anyway. Signed-off-by: Jiri Slaby <[email protected]> Cc: stable <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uartZou Wei1-1/+3
This patch fixes below error reported by coccicheck drivers/tty/serial/bcm63xx_uart.c:848:2-8: ERROR: missing clk_put; clk_get on line 842 and execution via conditional on line 846 Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zou Wei <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23vt: don't hardcode the mem allocation upper boundNicolas Pitre1-1/+1
The code in vc_do_resize() bounds the memory allocation size to avoid exceeding MAX_ORDER down the kzalloc() call chain and generating a runtime warning triggerable from user space. However, not only is it unwise to use a literal value here, but MAX_ORDER may also be configurable based on CONFIG_FORCE_MAX_ZONEORDER. Let's use KMALLOC_MAX_SIZE instead. Note that prior commit bb1107f7c605 ("mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER") the KMALLOC_MAX_SIZE value could not be relied upon. Signed-off-by: Nicolas Pitre <[email protected]> Cc: <[email protected]> # v4.10+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23tty: serial: owl: add "much needed" clk_prepare_enable()Amit Singh Tomar1-0/+7
commit 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") breaks the UART on Cubieboard7-lite (based on S700 SoC), This is due to the fact that generic clk routine clk_disable_unused() disables the gate clks, and that in turns disables OWL UART (but UART driver never enables it). To prove this theory, Andre suggested to use "clk_ignore_unused" in kernel commnd line and it worked (Kernel happily lands into RAMFS world :)). This commit fix this up by adding clk_prepare_enable(). Fixes: 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit") Signed-off-by: Amit Singh Tomar <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23vt: don't use kmalloc() for the unicode screen bufferNicolas Pitre1-2/+3
Even if the actual screen size is bounded in vc_do_resize(), the unicode buffer is still a little more than twice the size of the glyph buffer and may exceed MAX_ORDER down the kmalloc() path. This can be triggered from user space. Since there is no point having a physically contiguous buffer here, let's avoid the above issue as well as reducing pressure on high order allocations by using vmalloc() instead. Signed-off-by: Nicolas Pitre <[email protected]> Cc: <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-21tty: riscv: Using RISCV_SBI_V01 instead of RISCV_SBIKefeng Wang2-2/+2
As shown in SBI v0.2, the legacy console SBI functions (sbi_console_getchar() and sbi_console_putchar()) are expected to be deprecated; they have no replacement. Let's HVC_RISCV_SBI and SERIAL_EARLYCON_RISCV_SBI depends on RISCV_SBI_V01. Fixes: efca13989250 ("RISC-V: Introduce a new config for SBI v0.1") Signed-off-by: Kefeng Wang <[email protected]> Reviewed-by: Anup Patel <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-04-20tty/sysrq: Export sysrq_mask(), sysrq_toggle_support()Dmitry Safonov1-0/+2
Build fix for serial_core being module: ERROR: modpost: "sysrq_toggle_support" [drivers/tty/serial/serial_core.ko] undefined! ERROR: modpost: "sysrq_mask" [drivers/tty/serial/serial_core.ko] undefined! Fixes: eaee41727e6d ("sysctl/sysrq: Remove __sysrq_enabled copy") Cc: Jiri Slaby <[email protected]> Reported-by: "kernelci.org bot" <[email protected]> Reported-by: Michael Ellerman <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Dmitry Safonov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16serial: sh-sci: Make sure status register SCxSR is read in correct sequenceKazuhiro Fujita1-3/+10
For SCIF and HSCIF interfaces the SCxSR register holds the status of data that is to be read next from SCxRDR register, But where as for SCIFA and SCIFB interfaces SCxSR register holds status of data that is previously read from SCxRDR register. This patch makes sure the status register is read depending on the port types so that errors are caught accordingly. Cc: <[email protected]> Signed-off-by: Kazuhiro Fujita <[email protected]> Signed-off-by: Hao Bui <[email protected]> Signed-off-by: KAZUMI HARADA <[email protected]> Signed-off-by: Lad Prabhakar <[email protected]> Tested-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16serial: sunhv: Initialize lock for non-registered consoleAndy Shevchenko1-0/+3
The commit a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") changed a bit logic behind lock initialization since for most of the console driver it's supposed to have lock already initialized even if console is not enabled. However, it's not the case for Sparc HV console. Initialize lock explicitly in the ->probe(). Note, there is still an open question should or shouldn't not this driver register console properly. Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console") Reported-by: Anatoly Pugachev <[email protected]> Cc: David Miller <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Tested-by: Anatoly Pugachev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16serial: uartps: Use cdns_uart_tx_empty in console_writeRaviteja Narayanam1-3/+1
Instead of accessing the registers and checking for tx_empty, use cdns_uart_tx_empty in cdns_uart_console_write function. Signed-off-by: Raviteja Narayanam <[email protected]> Reviewed-by: Shubhrajyoti Datta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16serial: uartps: Wait for tx_empty in console setupRaviteja Narayanam1-0/+8
On some platforms, the log is corrupted while console is being registered. It is observed that when set_termios is called, there are still some bytes in the FIFO to be transmitted. So, wait for tx_empty inside cdns_uart_console_setup before calling set_termios. Signed-off-by: Raviteja Narayanam <[email protected]> Reviewed-by: Shubhrajyoti Datta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16vt: extract selection chars storing from vc_do_selectionJiri Slaby1-37/+42
Let's put it to a separate function, named vc_selection_store_chars. Again, this makes vc_do_selection a bit shorter and more readable. Having 4 local variables instead of 12 (5.6-rc1) looks much better now. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16vt: selection, split __set_selection_kernelJiri Slaby1-37/+43
Handle these actions: * poking console * TIOCL_SELCLEAR * TIOCL_SELMOUSEREPORT * start/end precomputation * clear_selection if the console changed in a separate function, thus making __set_selection_kernel way shorter and more readable. The function still needs dissection, but we are approaching. This includes introduction of vc_selection and renaming __set_selection_kernel to vc_do_selection. Signed-off-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16serial: sh-sci: Drop unused includeLinus Walleij1-1/+0
The sh-sci.h file includes the legacy <linux/gpio.h> header but the driver is actually migrated to use the mctrl_gpio library so this is not needed. Cc: George G. Davis <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16drivers/tty: remove redundant assignment to variable i and rename it to retColin Ian King1-3/+3
The variable i is being assigned a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Also rename i to ret as this new name makes makes more sense. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16tty: serial: fsl_lpuart: make coverity happyMichael Walle1-3/+1
Coverity reports the following: var_compare_op: Comparing chan to null implies that chan might be null. 1234 if (chan) 1235 dmaengine_terminate_all(chan); 1236 Dereference after null check (FORWARD_NULL) var_deref_op: Dereferencing null pointer chan. 1237 dma_unmap_sg(chan->device->dev, &sport->rx_sgl, 1, DMA_FROM_DEVICE); Technically, this is correct. But lpuart_dma_rx_free() is guarded by lpuart_dma_rx_use which is only true if there is a dma channel, see lpuart_rx_dma_startup(). In any way, this looks bogus. So remove the superfluous "if (chan)" check and make coverity happy. Fixes: a092ab25fdaa ("tty: serial: fsl_lpuart: fix DMA mapping") Signed-off-by: Michael Walle <[email protected]> Reported-by: Colin Ian King <[email protected]> Acked-by: Jiri Slaby <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16serial: omap: Convert to use GPIO descriptorsLinus Walleij1-23/+25
This converts the OMAP serial driver to use a GPIO descriptor for the optional RTS signal. Cc: Shubhrajyoti D <[email protected]> Cc: Tony Lindgren <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16serial: lpc32xx_hs: Drop surplus includeLinus Walleij1-1/+0
The driver includes <linux/gpio.h> but does not use any symbols from the file so drop this include. Cc: Roland Stigge <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16Revert "serial: uartps: Register own uart console and driver structures"Michal Simek1-55/+40
This reverts commit 024ca329bfb9a948f76eaff3243e21b7e70182f2. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <[email protected]> Signed-off-by: Michal Simek <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16Revert "serial: uartps: Move Port ID to device data structure"Michal Simek1-11/+9
This reverts commit bed25ac0e2b6ab8f9aed2d20bc9c3a2037311800. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <[email protected]> Signed-off-by: Michal Simek <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/eb0ec98fecdca9b79c1a3ac0c30c668b6973b193.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16Revert "serial: uartps: Change uart ID port allocation"Michal Simek1-98/+13
This reverts commit ae1cca3fa3478be92948dbbcd722390272032ade. With setting up NR_PORTS to 16 to be able to use serial2 and higher aliases and don't loose functionality which was intended by these changes. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <[email protected]> Signed-off-by: Michal Simek <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/a94931b65ce0089f76fb1fe6b446a08731bff754.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES"Michal Simek1-4/+2
This reverts commit 2088cfd882d0403609bdf426e9b24372fe1b8337. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <[email protected]> Signed-off-by: Michal Simek <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/dac3898e3e32d963f357fb436ac9a7ac3cbcf933.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16Revert "serial: uartps: Fix error path when alloc failed"Michal Simek1-4/+2
This reverts commit 32cf21ac4edd6c0d5b9614368a83bcdc68acb031. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <[email protected]> Signed-off-by: Michal Simek <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16Revert "serial: uartps: Use the same dynamic major number for all ports"Michal Simek1-3/+2
This reverts commit ab262666018de6f4e206b021386b93ed0c164316. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <[email protected]> Signed-off-by: Michal Simek <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/14a565fc1e14a5ec6cc6a6710deb878ae8305f22.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-16Revert "serial: uartps: Fix uartps_major handling"Michal Simek1-7/+1
This reverts commit 5e9bd2d70ae7c00a95a22994abf1eef728649e64. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <[email protected]> Signed-off-by: Michal Simek <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/310999ab5342f788a7bc1b0e68294d4f052cad07.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-05Merge tag 'powerpc-5.7-1' of ↵Linus Torvalds1-3/+18
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Slightly late as I had to rebase mid-week to insert a bug fix: - A large series from Nick for 64-bit to further rework our exception vectors, and rewrite portions of the syscall entry/exit and interrupt return in C. The result is much easier to follow code that is also faster in general. - Cleanup of our ptrace code to split various parts out that had become badly intertwined with #ifdefs over the years. - Changes to our NUMA setup under the PowerVM hypervisor which should hopefully avoid non-sensical topologies which can lead to warnings from the workqueue code and other problems. - MAINTAINERS updates to remove some of our old orphan entries and update the status of others. - Quite a few other small changes and fixes all over the map. Thanks to: Abdul Haleem, afzal mohammed, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Balamuruhan S, Cédric Le Goater, Chen Zhou, Christophe JAILLET, Christophe Leroy, Christoph Hellwig, Clement Courbet, Daniel Axtens, David Gibson, Douglas Miller, Fabiano Rosas, Fangrui Song, Ganesh Goudar, Gautham R. Shenoy, Greg Kroah-Hartman, Greg Kurz, Gustavo Luiz Duarte, Hari Bathini, Ilie Halip, Jan Kara, Joe Lawrence, Joe Perches, Kajol Jain, Larry Finger, Laurentiu Tudor, Leonardo Bras, Libor Pechacek, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Masami Hiramatsu, Mauricio Faria de Oliveira, Michael Neuling, Michal Suchanek, Mike Rapoport, Nageswara R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Po-Hsu Lin, Pratik Rajesh Sampat, Rasmus Villemoes, Ravi Bangoria, Roman Bolshakov, Sam Bobroff, Sandipan Das, Santosh S, Sedat Dilek, Segher Boessenkool, Shilpasri G Bhat, Sourabh Jain, Srikar Dronamraju, Stephen Rothwell, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (158 commits) powerpc: Make setjmp/longjmp signature standard powerpc/cputable: Remove unnecessary copy of cpu_spec->oprofile_type powerpc: Suppress .eh_frame generation powerpc: Drop -fno-dwarf2-cfi-asm powerpc/32: drop unused ISA_DMA_THRESHOLD powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces selftests/powerpc: Fix try-run when source tree is not writable powerpc/vmlinux.lds: Explicitly retain .gnu.hash powerpc/ptrace: move ptrace_triggered() into hw_breakpoint.c powerpc/ptrace: create ppc_gethwdinfo() powerpc/ptrace: create ptrace_get_debugreg() powerpc/ptrace: split out ADV_DEBUG_REGS related functions. powerpc/ptrace: move register viewing functions out of ptrace.c powerpc/ptrace: split out TRANSACTIONAL_MEM related functions. powerpc/ptrace: split out SPE related functions. powerpc/ptrace: split out ALTIVEC related functions. powerpc/ptrace: split out VSX related functions. powerpc/ptrace: drop PARAMETER_SAVE_AREA_OFFSET powerpc/ptrace: drop unnecessary #ifdefs CONFIG_PPC64 powerpc/ptrace: remove unused header includes ...
2020-04-03Merge tag 'char-misc-5.7-rc1' of ↵Linus Torvalds3-91/+89
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char/misc/other driver patches for 5.7-rc1. Lots of things in here, and it's later than expected due to some reverts to resolve some reported issues. All is now clean with no reported problems in linux-next. Included in here is: - interconnect updates - mei driver updates - uio updates - nvmem driver updates - soundwire updates - binderfs updates - coresight updates - habanalabs updates - mhi new bus type and core - extcon driver updates - some Kconfig cleanups - other small misc driver cleanups and updates As mentioned, all have been in linux-next for a while, and with the last two reverts, all is calm and good" * tag 'char-misc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (174 commits) Revert "driver core: platform: Initialize dma_parms for platform devices" Revert "amba: Initialize dma_parms for amba devices" amba: Initialize dma_parms for amba devices driver core: platform: Initialize dma_parms for platform devices bus: mhi: core: Drop the references to mhi_dev in mhi_destroy_device() bus: mhi: core: Initialize bhie field in mhi_cntrl for RDDM capture bus: mhi: core: Add support for reading MHI info from device misc: rtsx: set correct pcr_ops for rts522A speakup: misc: Use dynamic minor numbers for speakup devices mei: me: add cedar fork device ids coresight: do not use the BIT() macro in the UAPI header Documentation: provide IBM contacts for embargoed hardware nvmem: core: remove nvmem_sysfs_get_groups() nvmem: core: use is_bin_visible for permissions nvmem: core: use device_register and device_unregister nvmem: core: add root_only member to nvmem device struct extcon: axp288: Add wakeup support extcon: Mark extcon_get_edev_name() function as exported symbol extcon: palmas: Hide error messages if gpio returns -EPROBE_DEFER dt-bindings: extcon: usbc-cros-ec: convert extcon-usbc-cros-ec.txt to yaml format ...
2020-03-31Merge tag 'tty-5.7-rc1' of ↵Linus Torvalds56-1352/+1998
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial updates from Greg KH: "Here is the big set of TTY / Serial patches for 5.7-rc1 Lots of console fixups and reworking in here, serial core tweaks (doesn't that ever get old, why are we still creating new serial devices?), serial driver updates, line-protocol driver updates, and some vt cleanups and fixes included in here as well. All have been in linux-next with no reported issues" * tag 'tty-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (161 commits) serial: 8250: Optimize irq enable after console write serial: 8250: Fix rs485 delay after console write vt: vt_ioctl: fix use-after-free in vt_in_use() vt: vt_ioctl: fix VT_DISALLOCATE freeing in-use virtual console tty: serial: make SERIAL_SPRD depend on COMMON_CLK tty: serial: fsl_lpuart: fix return value checking tty: serial: fsl_lpuart: move dma_request_chan() ARM: dts: tango4: Make /serial compatible with ns16550a ARM: dts: mmp*: Make the serial ports compatible with xscale-uart ARM: dts: mmp*: Fix serial port names ARM: dts: mmp2-brownstone: Don't redeclare phandle references ARM: dts: pxa*: Make the serial ports compatible with xscale-uart ARM: dts: pxa*: Fix serial port names ARM: dts: pxa*: Don't redeclare phandle references serial: omap: drop unused dt-bindings header serial: 8250: 8250_omap: Add DMA support for UARTs on K3 SoCs serial: 8250: 8250_omap: Work around errata causing spurious IRQs with DMA serial: 8250: 8250_omap: Extend driver data to pass FIFO trigger info serial: 8250: 8250_omap: Move locking out from __dma_rx_do_complete() serial: 8250: 8250_omap: Account for data in flight during DMA teardown ...
2020-03-30Merge branch 'pm-qos'Rafael J. Wysocki2-15/+13
* pm-qos: (30 commits) PM: QoS: annotate data races in pm_qos_*_value() Documentation: power: fix pm_qos_interface.rst format warning PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE Documentation: PM: QoS: Update to reflect previous code changes PM: QoS: Update file information comments PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions sound: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*() drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*() x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*() cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request() PM: QoS: Add CPU latency QoS API wrappers PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h PM: QoS: Simplify definitions of CPU latency QoS trace events ...
2020-03-27serial: 8250: Optimize irq enable after console writeLukas Wunner1-1/+2
Commit 7f9803072ff6 ("serial: 8250: Support console on software emulated rs485 ports") amended serial8250_console_write() with rs485 support, but positioned the invocation of ->rs485_stop_tx() after re-enablement of interrupts. The irq handler and ->console_write() are serialized with the port spinlock, so no problem there, but due to the rs485 delay, the irq handler may unnecessarily spin for a while. Avoid that by moving ->rs485_stop_tx() before re-enablement of interrupts, which also mirrors the order at the beginning of serial8250_console_write(). Signed-off-by: Lukas Wunner <[email protected]> Link: https://lore.kernel.org/r/019839cb1f61b01210b6ff9ac9f9079ca77f8411.1585319447.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.