aboutsummaryrefslogtreecommitdiff
path: root/drivers/tty
AgeCommit message (Collapse)AuthorFilesLines
2024-04-17serial: stm32: Reset .throttled state in .startup()Uwe Kleine-König1-0/+1
When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: stm32: Return IRQ_NONE in the ISR if no handling happendUwe Kleine-König1-2/+10
If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled. A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: exar: adding missing CTI and Exar PCI idsParker Newman1-0/+42
- Added Connect Tech and Exar IDs not already in pci_ids.h Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/7c3d8e795a864dd9b0a00353b722060dc27c4e09.1713270624.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: 8250_pnp: Support configurable reg shift propertyGuanbing Huang1-15/+25
The 16550a serial port based on the ACPI table requires obtaining the reg-shift attribute. In the ACPI scenario, If the reg-shift property is not configured like in DTS, the 16550a serial driver cannot read or write controller registers properly during initialization. Signed-off-by: Guanbing Huang <albanhuang@tencent.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bing Fan <tombinfan@tencent.com> Tested-by: Linheng Du <dylanlhdu@tencent.com> Link: https://lore.kernel.org/r/4726ecea8f7bfbfe42501b4f6ad9fe5b38994574.1713234515.git.albanhuang@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: port: Add support of PNP IRQ to __uart_read_properties()Guanbing Huang1-1/+6
The function __uart_read_properties doesn't cover PNP devices, so add IRQ processing for PNP devices in the branch. Signed-off-by: Guanbing Huang <albanhuang@tencent.com> Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bing Fan <tombinfan@tencent.com> Tested-by: Linheng Du <dylanlhdu@tencent.com> Link: https://lore.kernel.org/r/7f4ca31ef1cab4c6ecad22fafd82117686b696be.1713234515.git.albanhuang@tencent.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: 8250_dw: Hide a cast in dw8250_serial_inq()Andy Shevchenko1-3/+1
dw8250_serial_inq() uses unsigned int variable to store 8-bit value. Due to that it needs a cast which can be avoided by switching to use u8 instead of unsigned int. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240412173937.187442-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: 8250_dw: Deduplicate LCR checksAndy Shevchenko1-26/+15
All callers of dw8250_check_lcr() perform the same check. Deduplicate it by moving them into respective call. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240412173931.187411-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17tty: serial: fsl_lpuart: use dev_err_probe for clocksAlexander Stein1-4/+2
Clocks might not be available yet when probing lpuart. Silence -517 errors by using dev_err_probe. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20240411130449.1096090-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: imx: Introduce timeout when waiting on transmitter emptyEsben Haabendal1-3/+4
By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential deadlock. In case of the timeout, there is not much we can do, so we simply ignore the transmitter state and optimistically try to continue. Signed-off-by: Esben Haabendal <esben@geanix.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/919647898c337a46604edcabaf13d42d80c0915d.1712837613.git.esben@geanix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: core: Extract uart_alloc_xmit_buf() and uart_free_xmit_buf()Andy Shevchenko1-44/+54
After conversion to the kfifo, it becomes possible to extract two helper functions for better maintenance and code deduplication. Do it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409174057.1104262-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17serial: drop debugging WARN_ON_ONCE() from uart_put_char()Jiri Slaby (SUSE)1-1/+1
Pengfei Xu reports, that the -next commit 1788cf6a91d9 (tty: serial: switch from circ_buf to kfifo) tries to emit a WARNING and that leads to lockdep errors. Obviously we cannot print anything from uart_put_char()! This WARN_ON_ONCE() was/is a debug aid to check if the condition in uart_put_char() can happen at all. Pengfei Xu confirmed it can. Unlike me and kbuild bot in my queue. Second, I completely forgot about it, so I did not remove it in the final version, nor mentioned it in the commit log. Drop it now as we are all good. And we even have stack traces (and a reproducer)! Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reported-by: Pengfei Xu <pengfei.xu@intel.com> Link: https://lore.kernel.org/r/20240416071904.21440-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-16serial: meson+qcom: don't advance the kfifo twiceJiri Slaby (SUSE)2-4/+1
Marek reports, that the -next commit 1788cf6a91d9 (tty: serial: switch from circ_buf to kfifo) broke meson_uart and qcom_geni_serial. The commit mistakenly advanced the kfifo twice: once by uart_fifo_get()/kfifo_out() and second time by uart_xmit_advance(). To advance the fifo only once, drop the superfluous uart_xmit_advance() from both. To count the TX statistics properly, use uart_fifo_out() in qcom_geni_serial (meson_uart_start_tx() already uses that). I checked all other uses of uart_xmit_advance() and they appear correct: either they are finishing DMA transfers or are after peek/linear_ptr (i.e. they do not advance fifo). Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 1788cf6a91d9 ("tty: serial: switch from circ_buf to kfifo") Cc: Neil Armstrong <neil.armstrong@linaro.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20240416054825.6211-1-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13serial: core: Fix ifdef for serial base console functionsTony Lindgren1-2/+2
If CONFIG_SERIAL_CORE_CONSOLE is not set, we get build errors. Let's fix the issue by moving the endif after the serial base console functions. Fixes: 4547cd76f08a ("serial: 8250: Fix add preferred console for serial8250_isa_init_ports()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404131416.VJljwvkS-lkp@intel.com/ Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240413103343.24231-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11tty/sysrq: Replay kernel log messages on consoles via sysrqSreenath Vijayan1-1/+12
When terminal is unresponsive, one cannot use dmesg to view the printk ring buffer messages. Also, syslog services may be disabled, especially on embedded systems, to check the messages after a reboot. In this scenario, replay the messages in printk ring buffer on consoles via sysrq by pressing sysrq+R. The console loglevel will determine which all kernel log messages are displayed. The messages will be displayed only when console_trylock() succeeds. Users could repeat the sysrq key when it fails. If the owner of console subsystem lock is stuck, repeating the key won't work. Suggested-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Shimoyashiki Taichi <taichi.shimoyashiki@sony.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sreenath Vijayan <sreenath.vijayan@sony.com> Link: https://lore.kernel.org/r/cc3b9b1aae60a236c6aed1dc7b0ffa2c7cd1f183.1710220326.git.sreenath.vijayan@sony.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: core: Fix missing shutdown and startup for serial base portTony Lindgren3-3/+55
We are seeing start_tx being called after port shutdown as noted by Jiri. This happens because we are missing the startup and shutdown related functions for the serial base port. Let's fix the issue by adding startup and shutdown functions for the serial base port to block tx flushing for the serial base port when the port is not in use. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Cc: stable <stable@kernel.org> Reported-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240411055848.38190-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: max3100: Convert to_max3100_port() to be static inlineAndy Shevchenko1-1/+4
As Jiri rightfully pointed out the current to_max3100_port() macro implementation is fragile in a sense that it expects the variable name to be port, otherwise it blow up the build. Change this to be static inline to prevent bad compilation. Suggested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240410141135.1378948-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: omap: remove redundant assignment to variable tmoutColin Ian King1-1/+0
Variable tmout is being assigned a value that is never read, it is being re-assinged in the following for-loop statement. The assignment is redundant and can be removed. Cleans up clang scan warning: drivers/tty/serial/omap-serial.c:1096:3: warning: Value stored to 'tmout' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240411085537.306020-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: 8250: Fix add preferred console for serial8250_isa_init_ports()Tony Lindgren2-11/+10
We need to inline serial_base_add_isa_preferred_console() based on CONFIG_SERIAL_8250_CONSOLE and not based on CONFIG_SERIAL_CORE_CONSOLE. Otherwise we can get the follwoing error as noted by Stephen: ERROR: modpost: "serial_base_add_isa_preferred_console" [drivers/tty/serial/8250/8250.ko] undefined! We also have a duplicate inlined serial_base_add_isa_preferred_console(), in serial_base_bus.c added by the same commit by accident, let's drop it. Fixes: a8b04cfe7dad ("serial: 8250: Add preferred console in serial8250_isa_init_ports()") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240411080622.11929-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_regcfg)Hugo Villeneuve4-10/+16
Since each I2C/SPI probe function can modify sc16is7xx_regcfg at the same time, change structure to be constant and do the required modifications on a local copy. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240409154253.3043822-6-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: sc16is7xx: split into core and I2C/SPI parts (sc16is7xx_lines)Hugo Villeneuve1-11/+21
Before, sc16is7xx_lines was checked for a free (zero) bit first, and then later it was set only if UART port registration succeeded. Now that sc16is7xx_lines is shared for the I2C and SPI drivers, there is a possibility that the two drivers can simultaneously try to reserve the same line bit at the same time. To prevent this, make sure line allocation is reserved atomically, and use a new variable to hold the status of UART port registration. Now that we no longer need to search if a bit is set, it is now possible to simplify sc16is7xx_lines allocation by using the IDA framework. Link: https://lore.kernel.org/all/20231212150302.a9ec5d085a4ba65e89ca41af@hugovil.com/ Link: https://lore.kernel.org/all/CAHp75VebCZckUrNraYQj9k=Mrn2kbYs1Lx26f5-8rKJ3RXeh-w@mail.gmail.com/ Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240409154253.3043822-5-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: sc16is7xx: split into core and I2C/SPI parts (core)Hugo Villeneuve6-218/+248
Split the common code from sc16is7xx driver and move the I2C and SPI bus parts into interface-specific source files. sc16is7xx becomes the core functions which can support multiple bus interfaces like I2C and SPI. No functional changes intended. Also simplify and improve Kconfig entries. - Capitalize SPI keyword for consistency - Display list of supported ICs each on a separate line (and aligned) to facilitate locating a specific IC model - Add Manufacturer name at start of description string - Add UART keyword to description string Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240409154253.3043822-4-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: sc16is7xx: unconditionally clear line bit in sc16is7xx_remove()Hugo Villeneuve1-2/+2
There is no need to check for previous port registration in sc16is7xx_remove() because if sc16is7xx_probe() succeeded, we are guaranteed to have successfully registered both ports. We can thus unconditionally clear the line allocation bit in sc16is7xx_lines. Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240409154253.3043822-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-11serial: sc16is7xx: add proper sched.h include for sched_set_fifo()Hugo Villeneuve1-1/+1
Replace incorrect include with the proper one for sched_set_fifo() declaration. Fixes: 28d2f209cd16 ("sched,serial: Convert to sched_set_fifo()") Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240409154253.3043822-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: ar933x: Remove unneeded static structureLino Sanfilippo1-2/+1
In case that no RTS GPIO is available do not use a dedicated nullified serial_rs485 struct to disable RS485 support, but simply delete the SER_RS485_ENABLED flag in the ports rs485_supported struct. This make the structure superfluous and it can be removed. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240407002709.16224-5-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: 8250: Remove superfluous sanity checkLino Sanfilippo1-7/+0
The serial core already checks the RS485 RTS settings for sanity, so remove the superfluous check in serial8250_em485_config(). Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240407002709.16224-4-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: amba-pl011: move variable into CONFIG_DMA_ENGINE conditionalLino Sanfilippo1-1/+1
Variable dmacr is only used if DMA is enabled, so move it into the CONFIG_DMA_ENGINE conditional. Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240407002709.16224-3-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()Lino Sanfilippo1-13/+1
Due to earlier code changes function pl011_get_rs485_mode() is now merely a wrapper for uart_get_rs485_mode() which does not add any further functionality. So remove it and instead call uart_get_rs485_mode() directly. Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Link: https://lore.kernel.org/r/20240407002709.16224-2-l.sanfilippo@kunbus.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Sort headersAndy Shevchenko1-3/+3
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409144721.638326-9-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Extract to_max3100_port() helper macroAndy Shevchenko1-48/+19
Instead of using container_of() explicitly, introduce a helper macro. This saves a lot of lines of code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240409144721.638326-8-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Switch to DEFINE_SIMPLE_DEV_PM_OPS()Andy Shevchenko1-9/+3
The SIMPLE_DEV_PM_OPS() is deprecated, replace it with the DEFINE_SIMPLE_DEV_PM_OPS() and use pm_sleep_ptr() for setting the driver's PM routines. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409144721.638326-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Replace MODULE_ALIAS() with respective ID tablesAndy Shevchenko1-1/+15
MODULE_ALIAS() in most cases is a pure hack to avoid placing ID tables. Replace it with the respective ID tables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409144721.638326-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Switch to use dev_err_probe()Andy Shevchenko1-9/+3
Switch to use dev_err_probe() to simplify the error path and unify a message template. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409144721.638326-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Remove duplicating irq fieldAndy Shevchenko1-12/+10
The struct uart_port has a copy of the IRQ that is also stored in the private data structure. Remove the duplication in the latter one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409144721.638326-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Get crystal frequency via device propertyAndy Shevchenko1-29/+20
Get crystal frequency via device property instead of using a platform data. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409144721.638326-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Enable TIOCM_LOOPAndy Shevchenko1-12/+14
Enable or disable loopback at run-time. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240409144721.638326-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: core: Clearing the circular buffer before NULLifying itAndy Shevchenko1-0/+1
The circular buffer is NULLified in uart_tty_port_shutdown() under the spin lock. However, the PM or other timer based callbacks may still trigger after this event without knowning that buffer pointer is not valid. Since the serial code is a bit inconsistent in checking the buffer state (some rely on the head-tail positions, some on the buffer pointer), it's better to have both aligned, i.e. buffer pointer to be NULL and head-tail possitions to be the same, meaning it's empty. This will prevent asynchronous calls to dereference NULL pointer as reported recently in 8250 case: BUG: kernel NULL pointer dereference, address: 00000cf5 Workqueue: pm pm_runtime_work EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) ... ? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) __start_tx (drivers/tty/serial/8250/8250_port.c:1551) serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654) serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63) __rpm_callback (drivers/base/power/runtime.c:393) ? serial_port_remove (drivers/tty/serial/serial_port.c:50) rpm_suspend (drivers/base/power/runtime.c:447) The proposed change will prevent ->start_tx() to be called during suspend on shut down port. Fixes: 43066e32227e ("serial: port: Don't suspend if the port is still busy") Cc: stable <stable@kernel.org> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404031607.2e92eebe-lkp@intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240404150034.41648-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09tty: serial: sc16is7xx: convert to use maple tree register cachewangkaiyuan1-1/+1
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: wangkaiyuan <wangkaiyuan@inspur.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240318064216.1765-1-wangkaiyuan@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09tty: serial: max310x: convert to use maple tree register cachewangkaiyuan1-2/+2
The maple tree register cache is based on a much more modern data structure than the rbtree cache and makes optimisation choices which are probably more appropriate for modern systems than those made by the rbtree cache. Signed-off-by: wangkaiyuan <wangkaiyuan@inspur.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240318064036.1656-1-wangkaiyuan@inspur.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial/pmac_zilog: Remove flawed mitigation for rx irq floodFinn Thain1-14/+0
The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@kernel.org Cc: linux-m68k@lists.linux-m68k.org Link: https://github.com/vivier/qemu-m68k/issues/44 Link: https://lore.kernel.org/all/1078874617.9746.36.camel@gaston/ Acked-by: Michael Ellerman <mpe@ellerman.id.au> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@kernel.org> Signed-off-by: Finn Thain <fthain@linux-m68k.org> Link: https://lore.kernel.org/r/e853cf2c762f23101cd2ddec0cc0c2be0e72685f.1712568223.git.fthain@linux-m68k.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: 8250_pci: Remove redundant PCI IDsAndy Shevchenko1-6/+0
Driver complains that PCI IDs are not needed for some of the LAVA cards: [ 0.297252] serial 0000:04:00.0: Redundant entry in serial pci_table. [ 0.297252] Please send the output of lspci -vv, this [ 0.297252] message (0x1407,0x0120,0x0000,0x0000), the [ 0.297252] manufacturer and name of serial board or [ 0.297252] modem board to <linux-serial@vger.kernel.org>. Do as suggested. Reported-by: Jimmy A <jimand04@hotmail.com> Closes: https://lore.kernel.org/r/VI1P194MB052751BE157EFE9CEAB75725CE362@VI1P194MB0527.EURP194.PROD.OUTLOOK.COM Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240403224152.945099-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: core: Fix regression when runtime PM is not enabledTony Lindgren1-1/+1
Commit 45a3a8ef8129 ("serial: core: Revert checks for tx runtime PM state") caused a regression for Sun Ultra 60 for the sunsab driver as reported by Nick Bowler <nbowler@draconx.ca>. We need to add back the check runtime PM enabled state for serial port controller device, I wrongly assumed earlier we could just remove it. Fixes: 45a3a8ef8129 ("serial: core: Revert checks for tx runtime PM state") Cc: stable <stable@kernel.org> Reported-by: Nick Bowler <nbowler@draconx.ca> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240325071649.27040-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: mxs-auart: add spinlock around changing cts stateEmil Kronborg1-2/+6
The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) Cc: stable@vger.kernel.org Fixes: 4d90bb147ef6 ("serial: core: Document and assert lock requirements for irq helpers") Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Emil Kronborg <emil.kronborg@protonmail.com> Link: https://lore.kernel.org/r/20240320121530.11348-1-emil.kronborg@protonmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: 8250_dw: Revert: Do not reclock if already at correct rateHans de Goede1-3/+3
Commit e5d6bd25f93d ("serial: 8250_dw: Do not reclock if already at correct rate") breaks the dw UARTs on Intel Bay Trail (BYT) and Cherry Trail (CHT) SoCs. Before this change the RTL8732BS Bluetooth HCI which is found connected over the dw UART on both BYT and CHT boards works properly: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508 Bluetooth: hci0: RTL: fw version 0x365d462e where as after this change probing it fails: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508 Bluetooth: hci0: command 0xfc20 tx timeout Bluetooth: hci0: RTL: download fw command failed (-110) Revert the changes to fix this regression. Fixes: e5d6bd25f93d ("serial: 8250_dw: Do not reclock if already at correct rate") Cc: stable@vger.kernel.org Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Peter Collingbourne <pcc@google.com> Link: https://lore.kernel.org/r/20240317214123.34482-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: 8250_lpc18xx: disable clks on error in probe()Dan Carpenter1-1/+1
Goto the clean up path to clean up a couple clocks before returning on this error path. Fixes: 0087b9e694ee ("serial: 8250_lpc18xx: Switch to use uart_read_port_properties()") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/92646c10-e0b5-4117-a9ac-ce9987d33ce3@moroto.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Update Kconfig entryAndy Shevchenko1-2/+5
The driver actually supports more than one chip. Update Kconfig entry to list the supported chips. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-17-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Remove unneeded forward declarationAndy Shevchenko1-16/+14
There is no code using max3100_work() before the definition of it. Remove unneeded forward declaration. While at it, move max3100_dowork() and max3100_timeout() down in the code to be after actual max3100_work() implementation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-15-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Replace custom polling timeout with standard oneAndy Shevchenko1-20/+5
Serial core provides a standard timeout for polling modem state. Use it instead of a custom approach. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Remove custom HW shutdown supportAndy Shevchenko1-35/+7
While there is no user of this callback in the kernel, it also breaks the relationship in the driver model. The correct implementation should be done via GPIO or regulator framework. Remove custom HW shutdown support for good and, if needed, we will implement it correctly later on. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Make struct plat_max3100 localAndy Shevchenko1-20/+18
There is no user of the struct plat_max3100 outside the driver. Inline its contents into the driver. While at it, drop outdated example in the comment. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-09serial: max3100: Fix bitwise typesAndy Shevchenko1-1/+4
Sparse is not happy about misuse of bitwise types: .../max3100.c:194:13: warning: incorrect type in assignment (different base types) .../max3100.c:194:13: expected unsigned short [addressable] [usertype] etx .../max3100.c:194:13: got restricted __be16 [usertype] .../max3100.c:202:15: warning: cast to restricted __be16 Fix this by choosing proper types for the respective variables. Fixes: 7831d56b0a35 ("tty: MAX3100") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240402195306.269276-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Powered by cgit, Gruvboxed by Blaster4385.